summaryrefslogtreecommitdiff
path: root/include/soc
AgeCommit message (Collapse)AuthorFilesLines
2021-09-02Merge tag 'drivers-5.15' of ↵Linus Torvalds1-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "These are updates for drivers that are tied to a particular SoC, including the correspondig device tree bindings: - A couple of reset controller changes for unisoc, uniphier, renesas and zte platforms - memory controller driver fixes for omap and tegra - Rockchip io domain driver updates - Lots of updates for qualcomm platforms, mostly touching their firmware and power management drivers - Tegra FUSE and firmware driver updateѕ - Support for virtio transports in the SCMI firmware framework - cleanup of ixp4xx drivers, towards enabling multiplatform support and bringing it up to date with modern platforms - Minor updates for keystone, mediatek, omap, renesas" * tag 'drivers-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits) reset: simple: remove ZTE details in Kconfig help soc: rockchip: io-domain: Remove unneeded semicolon soc: rockchip: io-domain: add rk3568 support dt-bindings: power: add rk3568-pmu-io-domain support bus: ixp4xx: return on error in ixp4xx_exp_probe() soc: renesas: Prefer memcpy() over strcpy() firmware: tegra: Stop using seq_get_buf() soc/tegra: fuse: Enable fuse clock on suspend for Tegra124 soc/tegra: fuse: Add runtime PM support soc/tegra: fuse: Clear fuse->clk on driver probe failure soc/tegra: pmc: Prevent racing with cpuilde driver soc/tegra: bpmp: Remove unused including <linux/version.h> dt-bindings: soc: ti: pruss: Add dma-coherent property soc: ti: Remove pm_runtime_irq_safe() usage for smartreflex soc: ti: pruss: Enable support for ICSSG subsystems on K3 AM64x SoCs dt-bindings: soc: ti: pruss: Update bindings for K3 AM64x SoCs firmware: arm_scmi: Use WARN_ON() to check configured transports firmware: arm_scmi: Fix boolconv.cocci warnings soc: mediatek: mmsys: Fix missing UFOE component in mt8173 table routing soc: mediatek: mmsys: add MT8365 support ...
2021-09-02Merge tag 'soc-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds2-0/+114
Pull ARM SoC updates from Arnd Bergmann: "There are three noteworthy updates for 32-bit arm platforms this time: - The Microchip SAMA7 family based on Cortex-A7 gets introduced, a new cousin to the older SAM9 (ARM9xx based) and SAMA5 (Cortex-A5 based) SoCs. - The ixp4xx platform (based on Intel XScale) is finally converted to device tree, and all the old board files are getting removed now. - The Cirrus Logic EP93xx platform loses support for the old MaverickCrunch FPU. Support for compiling user space applications was already removed in gcc-4.9, and the kernel support for old applications could not be built with clang ias. After confirming that there are no remaining users, removing this from the kernel seemed better than adding support for unused features to clang. There are minor updates to the aspeed, omap and samsung platforms" * tag 'soc-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (48 commits) soc: aspeed-lpc-ctrl: Fix clock cleanup in error path ARM: s3c: delete unneed local variable "delay" soc: aspeed: Re-enable FWH2AHB on AST2600 soc: aspeed: socinfo: Add AST2625 variant soc: aspeed: p2a-ctrl: Fix boundary check for mmap soc: aspeed: lpc-ctrl: Fix boundary check for mmap ARM: ixp4xx: Delete the Freecom FSG-3 boardfiles ARM: ixp4xx: Delete GTWX5715 board files ARM: ixp4xx: Delete Coyote and IXDPG425 boardfiles ARM: ixp4xx: Delete Intel reference design boardfiles ARM: ixp4xx: Delete Avila boardfiles ARM: ixp4xx: Delete the Arcom Vulcan boardfiles ARM: ixp4xx: Delete Gateway WG302v2 boardfiles ARM: ixp4xx: Delete Omicron boardfiles ARM: ixp4xx: Delete the D-Link DSM-G600 boardfiles ARM: ixp4xx: Delete NAS100D boardfiles ARM: ixp4xx: Delete NSLU2 boardfiles arm: omap2: Drop the unused OMAP_PACKAGE_* KConfig entries arm: omap2: Drop obsolete MACH_OMAP3_PANDORA entry ARM: ep93xx: remove MaverickCrunch support ...
2021-08-20net: mscc: ocelot: transmit the VLAN filtering restrictions via extackVladimir Oltean1-1/+2
We need to transmit more restrictions in future patches, convert this one to netlink extack. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-20net: mscc: ocelot: transmit the "native VLAN" error via extackVladimir Oltean1-1/+1
We need to reject some more configurations in future patches, convert the existing one to netlink extack. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-18Merge tag 'tegra-for-5.15-soc' of ↵Arnd Bergmann1-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers soc/tegra: Changes for v5.15-rc1 Implements runtime PM support for the FUSE block and prepares the driver to work better in conjunction with the CPUIDLE driver. * tag 'tegra-for-5.15-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: soc/tegra: fuse: Enable fuse clock on suspend for Tegra124 soc/tegra: fuse: Add runtime PM support soc/tegra: fuse: Clear fuse->clk on driver probe failure soc/tegra: pmc: Prevent racing with cpuilde driver soc/tegra: bpmp: Remove unused including <linux/version.h> Link: https://lore.kernel.org/r/20210813162157.2820913-3-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-16net: mscc: ocelot: convert to phylinkVladimir Oltean1-4/+15
The felix DSA driver, which is a wrapper over the same hardware class as ocelot, is integrated with phylink, but ocelot is using the plain PHY library. It makes sense to bring together the two implementations, which is what this patch achieves. This is a large patch and hard to break up, but it does the following: The existing ocelot_adjust_link writes some registers, and felix_phylink_mac_link_up writes some registers, some of them are common, but both functions write to some registers to which the other doesn't. The main reasons for this are: - Felix switches so far have used an NXP PCS so they had no need to write the PCS1G registers that ocelot_adjust_link writes - Felix switches have the MAC fixed at 1G, so some of the MAC speed changes actually break the link and must be avoided. The naming conventions for the functions introduced in this patch are: - vsc7514_phylink_{mac_config,validate} are specific to the Ocelot instantiations and placed in ocelot_net.c which is built only for the ocelot switchdev driver. - ocelot_phylink_mac_link_{up,down} are shared between the ocelot switchdev driver and the felix DSA driver (they are put in the common lib). One by one, the registers written by ocelot_adjust_link are: DEV_MAC_MODE_CFG - felix_phylink_mac_link_up had no need to write this register since its out-of-reset value was fine and did not need changing. The write is moved to the common ocelot_phylink_mac_link_up and on felix it is guarded by a quirk bit that makes the written value identical with the out-of-reset one DEV_PORT_MISC - runtime invariant, was moved to vsc7514_phylink_mac_config PCS1G_MODE_CFG - same as above PCS1G_SD_CFG - same as above PCS1G_CFG - same as above PCS1G_ANEG_CFG - same as above PCS1G_LB_CFG - same as above DEV_MAC_ENA_CFG - both ocelot_adjust_link and ocelot_port_disable touched this. felix_phylink_mac_link_{up,down} also do. We go with what felix does and put it in ocelot_phylink_mac_link_up. DEV_CLOCK_CFG - ocelot_adjust_link and felix_phylink_mac_link_up both write this, but to different values. Move to the common ocelot_phylink_mac_link_up and make sure via the quirk that the old values are preserved for both. ANA_PFC_PFC_CFG - ocelot_adjust_link wrote this, felix_phylink_mac_link_up did not. Runtime invariant, speed does not matter since PFC is disabled via the RX_PFC_ENA bits which are cleared. Move to vsc7514_phylink_mac_config. QSYS_SWITCH_PORT_MODE_PORT_ENA - both ocelot_adjust_link and felix_phylink_mac_link_{up,down} wrote this. Ocelot also wrote this register from ocelot_port_disable. Keep what felix did, move in ocelot_phylink_mac_link_{up,down} and delete ocelot_port_disable. ANA_POL_FLOWC - same as above SYS_MAC_FC_CFG - same as above, except slight behavior change. Whereas ocelot always enabled RX and TX flow control, felix listened to phylink (for the most part, at least - see the 2500base-X comment). The registers which only felix_phylink_mac_link_up wrote are: SYS_PAUSE_CFG_PAUSE_ENA - this is why I am not sure that flow control worked on ocelot. Not it should, since the code is shared with felix where it does. ANA_PORT_PORT_CFG - this is a Frame Analyzer block register, phylink should be the one touching them, deleted. Other changes: - The old phylib registration code was in mscc_ocelot_init_ports. It is hard to work with 2 levels of indentation already in, and with hard to follow teardown logic. The new phylink registration code was moved inside ocelot_probe_port(), right between alloc_etherdev() and register_netdev(). It could not be done before (=> outside of) ocelot_probe_port() because ocelot_probe_port() allocates the struct ocelot_port which we then use to assign ocelot_port->phy_mode to. It is more preferable to me to have all PHY handling logic inside the same function. - On the same topic: struct ocelot_port_private :: serdes is only used in ocelot_port_open to set the SERDES protocol to Ethernet. This is logically a runtime invariant and can be done just once, when the port registers with phylink. We therefore don't even need to keep the serdes reference inside struct ocelot_port_private, or to use the devm variant of of_phy_get(). - Phylink needs a valid phy-mode for phylink_create() to succeed, and the existing device tree bindings in arch/mips/boot/dts/mscc/ocelot_pcb120.dts don't define one for the internal PHY ports. So we patch PHY_INTERFACE_MODE_NA into PHY_INTERFACE_MODE_INTERNAL. - There was a strategically placed: switch (priv->phy_mode) { case PHY_INTERFACE_MODE_NA: continue; which made the code skip the serdes initialization for the internal PHY ports. Frankly that is not all that obvious, so now we explicitly initialize the serdes under an "if" condition and not rely on code jumps, so everything is clearer. - There was a write of OCELOT_SPEED_1000 to DEV_CLOCK_CFG for QSGMII ports. Since that is in fact the default value for the register field DEV_CLOCK_CFG_LINK_SPEED, I can only guess the intention was to clear the adjacent fields, MAC_TX_RST and MAC_RX_RST, aka take the port out of reset, which does match the comment. I don't even want to know why this code is placed there, but if there is indeed an issue that all ports that share a QSGMII lane must all be up, then this logic is already buggy, since mscc_ocelot_init_ports iterates using for_each_available_child_of_node, so nobody prevents the user from putting a 'status = "disabled";' for some QSGMII ports which would break the driver's assumption. In any case, in the eventuality that I'm right, we would have yet another issue if ocelot_phylink_mac_link_down would reset those ports and that would be forbidden, so since the ocelot_adjust_link logic did not do that (maybe for a reason), add another quirk to preserve the old logic. The ocelot driver teardown goes through all ports in one fell swoop. When initialization of one port fails, the ocelot->ports[port] pointer for that is reset to NULL, and teardown is done only for non-NULL ports, so there is no reason to do partial teardowns, let the central mscc_ocelot_release_ports() do its job. Tested bind, unbind, rebind, link up, link down, speed change on mock-up hardware (modified the driver to probe on Felix VSC9959). Also regression tested the felix DSA driver. Could not test the Ocelot specific bits (PCS1G, SERDES, device tree bindings). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-16net: dsa: felix: stop calling ocelot_port_{enable,disable}Vladimir Oltean1-2/+0
ocelot_port_enable touches ANA_PORT_PORT_CFG, which has the following fields: - LOCKED_PORTMOVE_CPU, LEARNDROP, LEARNCPU, LEARNAUTO, RECV_ENA, all of which are written with their hardware default values, also runtime invariants. So it makes no sense to write these during every .ndo_open. - PORTID_VAL: this field has an out-of-reset value of zero for all ports and must be initialized by software. Additionally, the ocelot_setup_logical_port_ids() code path sets up different logical port IDs for the ports in a hardware LAG, and we absolutely don't want .ndo_open to interfere there and reset those values. So in fact the write from ocelot_port_enable can better be moved to ocelot_init_port, and the .ndo_open hook deleted. ocelot_port_disable touches DEV_MAC_ENA_CFG and QSYS_SWITCH_PORT_MODE_PORT_ENA, in an attempt to undo what ocelot_adjust_link did. But since .ndo_stop does not get called each time the link falls (i.e. this isn't a substitute for .phylink_mac_link_down), felix already does better at this by writing those registers already in felix_phylink_mac_link_down. So keep ocelot_port_disable (for now, until ocelot is converted to phylink too), and just delete the felix call to it, which is not necessary. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-11soc/tegra: pmc: Prevent racing with cpuilde driverDmitry Osipenko1-0/+6
Both PMC and cpuidle drivers are probed at the same init level and cpuidle depends on the PMC suspend mode. Add new default suspend mode that indicates whether PMC driver has been probed and reset the mode in a case of deferred probe of the PMC driver. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-08-04Merge tag 'at91-soc-5.15' of ↵Arnd Bergmann2-0/+114
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/soc AT91 soc for 5.15: - add new SoC based on a Cortex-A7 core: the SAMA7G5 family - mach-at91 entry, Kconfig and header files - Power Management Controller (PMC) code and associated power management changes. Support for suspend/resume, Ultra Low Power modes and Backup with Memory in Self-Refresh mode. - Power management association with DDR controller and shutdown controller for addressing this variety of modes. * tag 'at91-soc-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: (26 commits) ARM: at91: pm: add sama7g5 shdwc ARM: at91: pm: add pm support for SAMA7G5 ARM: at91: sama7: introduce sama7 SoC family ARM: at91: pm: add sama7g5's pmc ARM: at91: pm: add backup mode support for SAMA7G5 ARM: at91: pm: save ddr phy calibration data to securam ARM: at91: pm: add sama7g5 ddr phy controller ARM: at91: pm: add sama7g5 ddr controller ARM: at91: pm: wait for ddr power mode off ARM: at91: pm: add support for 2.5V LDO regulator control ARM: at91: pm: add support for MCK1..4 save/restore for ulp modes ARM: at91: pm: add self-refresh support for sama7g5 ARM: at91: ddr: add registers definitions for sama7g5's ddr ARM: at91: sfrbu: add sfrbu registers definitions for sama7g5 ARM: at91: pm: add support for waiting MCK1..4 ARM: at91: pm: s/CONFIG_SOC_SAM9X60/CONFIG_HAVE_AT91_SAM9X60_PLL/g ARM: at91: pm: avoid push and pop on stack while memory is in self-refersh ARM: at91: pm: use r7 instead of tmp1 ARM: at91: pm: do not initialize pdev ARM: at91: pm: check for different controllers in at91_pm_modes_init() ... Link: https://lore.kernel.org/r/20210804084316.12641-1-nicolas.ferre@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-07-19ARM: at91: ddr: add registers definitions for sama7g5's ddrClaudiu Beznea1-0/+80
Add registers and bits definitions for SAMA7G5's UDDRC and DDR3PHY. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20210415105010.569620-12-claudiu.beznea@microchip.com
2021-07-19ARM: at91: sfrbu: add sfrbu registers definitions for sama7g5Claudiu Beznea1-0/+34
Add SFRBU registers definitions for SAMA7G5. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20210415105010.569620-11-claudiu.beznea@microchip.com
2021-07-16Merge tag 'memory-controller-drv-tegra-5.14-3' of ↵Arnd Bergmann1-2/+7
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/fixes Memory controller drivers for v5.14 - Tegra SoC, late fixes Two fixes for recent series of changes in Tegra SoC memory controller drivers: 1. Add a stub for tegra_mc_probe_device() to fix compile testing of arm-smmu without TEGRA_MC. 2. Fix arm-smmu dtschema syntax. * tag 'memory-controller-drv-tegra-5.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl: dt-bindings: arm-smmu: Fix json-schema syntax memory: tegra: Add compile-test stub for tegra_mc_probe_device() Link: https://lore.kernel.org/r/20210625073604.13562-1-krzysztof.kozlowski@canonical.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-07-10Merge tag 'arm-drivers-5.14' of ↵Linus Torvalds1-18/+47
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM driver updates from Olof Johansson: - Reset controllers: Adding support for Microchip Sparx5 Switch. - Memory controllers: ARM Primecell PL35x SMC memory controller driver cleanups and improvements. - i.MX SoC drivers: Power domain support for i.MX8MM and i.MX8MN. - Rockchip: RK3568 power domains support + DT binding updates, cleanups. - Qualcomm SoC drivers: Amend socinfo with more SoC/PMIC details, including support for MSM8226, MDM9607, SM6125 and SC8180X. - ARM FFA driver: "Firmware Framework for ARMv8-A", defining management interfaces and communication (including bus model) between partitions both in Normal and Secure Worlds. - Tegra Memory controller changes, including major rework to deal with identity mappings at boot and integration with ARM SMMU pieces. * tag 'arm-drivers-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (120 commits) firmware: turris-mox-rwtm: add marvell,armada-3700-rwtm-firmware compatible string firmware: turris-mox-rwtm: show message about HWRNG registration firmware: turris-mox-rwtm: fail probing when firmware does not support hwrng firmware: turris-mox-rwtm: report failures better firmware: turris-mox-rwtm: fix reply status decoding function soc: imx: gpcv2: add support for i.MX8MN power domains dt-bindings: add defines for i.MX8MN power domains firmware: tegra: bpmp: Fix Tegra234-only builds iommu/arm-smmu: Use Tegra implementation on Tegra186 iommu/arm-smmu: tegra: Implement SID override programming iommu/arm-smmu: tegra: Detect number of instances at runtime dt-bindings: arm-smmu: Add Tegra186 compatible string firmware: qcom_scm: Add MDM9607 compatible soc: qcom: rpmpd: Add MDM9607 RPM Power Domains soc: renesas: Add support to read LSI DEVID register of RZ/G2{L,LC} SoC's soc: renesas: Add ARCH_R9A07G044 for the new RZ/G2L SoC's dt-bindings: soc: rockchip: drop unnecessary #phy-cells from grf.yaml memory: emif: remove unused frequency and voltage notifiers memory: fsl_ifc: fix leak of private memory on probe failure memory: fsl_ifc: fix leak of IO mapping on probe failure ...
2021-07-10Merge tag 'arm-soc-5.14' of ↵Linus Torvalds4-3/+56
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC updates from Olof Johansson: "A few SoC (code) changes have queued up this cycle, mostly for minor changes and some refactoring and cleanup of legacy platforms. This branch also contains a few of the fixes that weren't sent in by the end of the release (all fairly minor). - Adding an additional maintainer for the TEE subsystem (Sumit Garg) - Quite a significant modernization of the IXP4xx platforms by Linus Walleij, revisiting with a new PCI host driver/binding, removing legacy mach/* include dependencies and moving platform detection/config to drivers/soc. Also some updates/cleanup of platform data. - Core power domain support for Tegra platforms, and some improvements in build test coverage by adding stubs for compile test targets. - A handful of updates to i.MX platforms, adding legacy (non-PSCI) SMP support on i.MX7D, SoC ID setup for i.MX50, removal of platform data and board fixups for iMX6/7. ... and a few smaller changes and fixes for Samsung, OMAP, Allwinner, Rockchip" * tag 'arm-soc-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (53 commits) MAINTAINERS: Add myself as TEE subsystem reviewer ixp4xx: fix spelling mistake in Kconfig "Devce" -> "Device" hw_random: ixp4xx: Add OF support hw_random: ixp4xx: Add DT bindings hw_random: ixp4xx: Turn into a module hw_random: ixp4xx: Use SPDX license tag hw_random: ixp4xx: enable compile-testing pata: ixp4xx: split platform data to its own header soc: ixp4xx: move cpu detection to linux/soc/ixp4xx/cpu.h PCI: ixp4xx: Add a new driver for IXP4xx PCI: ixp4xx: Add device tree bindings for IXP4xx ARM/ixp4xx: Make NEED_MACH_IO_H optional ARM/ixp4xx: Move the virtual IObases MAINTAINERS: ARM/MStar/Sigmastar SoCs: Add a link to the MStar tree ARM: debug: add UART early console support for MSTAR SoCs ARM: dts: ux500: Fix LED probing ARM: imx: add smp support for imx7d ARM: imx6q: drop of_platform_default_populate() from init_machine arm64: dts: rockchip: Update RK3399 PCI host bridge window to 32-bit address memory soc/tegra: fuse: Fix Tegra234-only builds ...
2021-06-26mbox: add polarfire soc system controller mailboxConor Dooley1-0/+43
This driver adds support for the single mailbox channel of the MSS system controller on the Microchip PolarFire SoC. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2021-06-20memory: tegra: Add compile-test stub for tegra_mc_probe_device()Thierry Reding1-2/+7
The tegra_mc_probe_device() symbol is only available when the TEGRA_MC Kconfig option is enabled. Provide a stub if that's not the case so that the driver can be compile-tested. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20210618111846.1286166-1-thierry.reding@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2021-06-15Merge tag 'tegra-for-5.14-soc' of ↵Olof Johansson3-3/+55
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/soc soc/tegra: Changes for v5.14-rc1 These changes implement the core power domain for the PMC, and fix a couple of minor issues as well as add stubs to help some drivers be compile tested more easily. * tag 'tegra-for-5.14-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: soc/tegra: fuse: Fix Tegra234-only builds soc/tegra: fuse: Don't return -ENOMEM when allocate lookups failed soc/tegra: regulators: Support core domain state syncing soc/tegra: pmc: Add driver state syncing soc/tegra: pmc: Add core power domain soc/tegra: fuse: Add stubs needed for compile-testing soc/tegra: Add devm_tegra_core_dev_init_opp_table() soc/tegra: Add stub for soc_is_tegra() soc/tegra: regulators: Bump voltages on system reboot regulator: core: Add regulator_sync_voltage_rdev() Link: https://lore.kernel.org/r/20210611164437.3568059-2-thierry.reding@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-03memory: tegra: Implement SID override programmingThierry Reding1-0/+3
Instead of programming all SID overrides during early boot, perform the operation on-demand after the SMMU translations have been set up for a device. This reuses data from device tree to match memory clients for a device and programs the SID specified in device tree, which corresponds to the SID used for the SMMU context banks for the device. Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20210603164632.1000458-2-thierry.reding@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2021-06-03memory: tegra: Unify driversThierry Reding1-0/+1
The Tegra210 (and earlier) driver now supports all the functionality that the Tegra186 (and later) driver does, so they can be unified. Note that previously the Tegra186 (and later) driver could be unloaded, even if that was perhaps not very useful. Older chips don't support that yet, but once they do this code can be reenabled. Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20210602163302.120041-11-thierry.reding@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2021-06-03memory: tegra: Parameterize interrupt handlerThierry Reding1-0/+2
Tegra20 requires a slightly different interrupt handler than Tegra30 and later, so parameterize the handler, so that each SoC implementation can provide its own. Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20210602163302.120041-8-thierry.reding@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2021-06-03memory: tegra: Make per-SoC setup more genericThierry Reding1-1/+5
The current per-SoC setup code runs at a fairly arbitrary point during probe, thereby making it less flexible for other SoC generations. Move the call around slightly (after only the very basic, common setup that applies to all SoC generations has been performed), which will allow it to be used for other implementations. Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20210602163302.120041-6-thierry.reding@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2021-06-03memory: tegra: Push suspend/resume into SoC driversThierry Reding1-0/+2
Continuing the scheme of unification, push suspend/resume callbacks into per-SoC driver so that they can be properly parameterized. Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20210602163302.120041-5-thierry.reding@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2021-06-03memory: tegra: Introduce struct tegra_mc_opsThierry Reding1-2/+5
Subsequent patches will introduce further callbacks, so create a new struct tegra_mc_ops to collect all of them in a single place. Move the existing ->init() callback into the new structure. Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20210602163302.120041-4-thierry.reding@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2021-06-03memory: tegra: Unify struct tegra_mc across SoC generationsThierry Reding1-2/+16
As another step towards unifying both the Tegra210 (and earlier) and Tegra186 (and later) memory controller drivers, unify the structures that are used to represent them. Note that this comes at a slight space penalty since some fields are not used on all generations, but the benefits of unifying the driver outweigh the downsides. Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20210602163302.120041-3-thierry.reding@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2021-06-03memory: tegra: Consolidate register fieldsThierry Reding1-15/+15
Subsequent patches will add more register fields to the tegra_mc_client structure, so consolidate all register field definitions into a common sub-structure for coherency. Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20210602163302.120041-2-thierry.reding@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2021-06-02soc/tegra: pmc: Add driver state syncingDmitry Osipenko1-0/+7
Add driver state syncing that is invoked once all PMC consumers are attached and ready. The consumers are the power domain clients. The synchronization callback is invoked once all client drivers are probed, the driver core handles this for us. This callback informs PMC driver that all voltage votes are initialized by each PD client and it's safe to begin voltage scaling of the core power domain. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> [treding@nvidia.com: squash DT backwards-compatibility patch] Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-06-01soc/tegra: fuse: Add stubs needed for compile-testingDmitry Osipenko1-3/+17
Add missing stubs that will allow Tegra memory driver to be compile-tested by kernel build bots. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-06-01soc/tegra: Add devm_tegra_core_dev_init_opp_table()Dmitry Osipenko1-0/+22
Add common helper which initializes OPP table for Tegra SoC core devices. Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30 Tested-by: Paul Fertser <fercerpav@gmail.com> # PAZ00 T20 Tested-by: Nicolas Chauvet <kwizart@gmail.com> # PAZ00 T20 and TK1 T124 Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30 Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-06-01soc/tegra: Add stub for soc_is_tegra()Dmitry Osipenko1-0/+9
Add stub required for compile-testing of drivers. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-05-13ARM: imx: Initialize SoC ID on i.MX50Jonathan Neuschäfer1-0/+1
As on i.MX51 and i.MX53, initialize the SoC ID based on the SoC compatible string of the board. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-04-29Merge tag 'net-next-5.13' of ↵Linus Torvalds2-19/+29
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - bpf: - allow bpf programs calling kernel functions (initially to reuse TCP congestion control implementations) - enable task local storage for tracing programs - remove the need to store per-task state in hash maps, and allow tracing programs access to task local storage previously added for BPF_LSM - add bpf_for_each_map_elem() helper, allowing programs to walk all map elements in a more robust and easier to verify fashion - sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT redirection - lpm: add support for batched ops in LPM trie - add BTF_KIND_FLOAT support - mostly to allow use of BTF on s390 which has floats in its headers files - improve BPF syscall documentation and extend the use of kdoc parsing scripts we already employ for bpf-helpers - libbpf, bpftool: support static linking of BPF ELF files - improve support for encapsulation of L2 packets - xdp: restructure redirect actions to avoid a runtime lookup, improving performance by 4-8% in microbenchmarks - xsk: build skb by page (aka generic zerocopy xmit) - improve performance of software AF_XDP path by 33% for devices which don't need headers in the linear skb part (e.g. virtio) - nexthop: resilient next-hop groups - improve path stability on next-hops group changes (incl. offload for mlxsw) - ipv6: segment routing: add support for IPv4 decapsulation - icmp: add support for RFC 8335 extended PROBE messages - inet: use bigger hash table for IP ID generation - tcp: deal better with delayed TX completions - make sure we don't give up on fast TCP retransmissions only because driver is slow in reporting that it completed transmitting the original - tcp: reorder tcp_congestion_ops for better cache locality - mptcp: - add sockopt support for common TCP options - add support for common TCP msg flags - include multiple address ids in RM_ADDR - add reset option support for resetting one subflow - udp: GRO L4 improvements - improve 'forward' / 'frag_list' co-existence with UDP tunnel GRO, allowing the first to take place correctly even for encapsulated UDP traffic - micro-optimize dev_gro_receive() and flow dissection, avoid retpoline overhead on VLAN and TEB GRO - use less memory for sysctls, add a new sysctl type, to allow using u8 instead of "int" and "long" and shrink networking sysctls - veth: allow GRO without XDP - this allows aggregating UDP packets before handing them off to routing, bridge, OvS, etc. - allow specifing ifindex when device is moved to another namespace - netfilter: - nft_socket: add support for cgroupsv2 - nftables: add catch-all set element - special element used to define a default action in case normal lookup missed - use net_generic infra in many modules to avoid allocating per-ns memory unnecessarily - xps: improve the xps handling to avoid potential out-of-bound accesses and use-after-free when XPS change race with other re-configuration under traffic - add a config knob to turn off per-cpu netdev refcnt to catch underflows in testing Device APIs: - add WWAN subsystem to organize the WWAN interfaces better and hopefully start driving towards more unified and vendor- independent APIs - ethtool: - add interface for reading IEEE MIB stats (incl. mlx5 and bnxt support) - allow network drivers to dump arbitrary SFP EEPROM data, current offset+length API was a poor fit for modern SFP which define EEPROM in terms of pages (incl. mlx5 support) - act_police, flow_offload: add support for packet-per-second policing (incl. offload for nfp) - psample: add additional metadata attributes like transit delay for packets sampled from switch HW (and corresponding egress and policy-based sampling in the mlxsw driver) - dsa: improve support for sandwiched LAGs with bridge and DSA - netfilter: - flowtable: use direct xmit in topologies with IP forwarding, bridging, vlans etc. - nftables: counter hardware offload support - Bluetooth: - improvements for firmware download w/ Intel devices - add support for reading AOSP vendor capabilities - add support for virtio transport driver - mac80211: - allow concurrent monitor iface and ethernet rx decap - set priority and queue mapping for injected frames - phy: add support for Clause-45 PHY Loopback - pci/iov: add sysfs MSI-X vector assignment interface to distribute MSI-X resources to VFs (incl. mlx5 support) New hardware/drivers: - dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit interfaces. - dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and BCM63xx switches - Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches - ath11k: support for QCN9074 a 802.11ax device - Bluetooth: Broadcom BCM4330 and BMC4334 - phy: Marvell 88X2222 transceiver support - mdio: add BCM6368 MDIO mux bus controller - r8152: support RTL8153 and RTL8156 (USB Ethernet) chips - mana: driver for Microsoft Azure Network Adapter (MANA) - Actions Semi Owl Ethernet MAC - can: driver for ETAS ES58X CAN/USB interfaces Pure driver changes: - add XDP support to: enetc, igc, stmmac - add AF_XDP support to: stmmac - virtio: - page_to_skb() use build_skb when there's sufficient tailroom (21% improvement for 1000B UDP frames) - support XDP even without dedicated Tx queues - share the Tx queues with the stack when necessary - mlx5: - flow rules: add support for mirroring with conntrack, matching on ICMP, GTP, flex filters and more - support packet sampling with flow offloads - persist uplink representor netdev across eswitch mode changes - allow coexistence of CQE compression and HW time-stamping - add ethtool extended link error state reporting - ice, iavf: support flow filters, UDP Segmentation Offload - dpaa2-switch: - move the driver out of staging - add spanning tree (STP) support - add rx copybreak support - add tc flower hardware offload on ingress traffic - ionic: - implement Rx page reuse - support HW PTP time-stamping - octeon: support TC hardware offloads - flower matching on ingress and egress ratelimitting. - stmmac: - add RX frame steering based on VLAN priority in tc flower - support frame preemption (FPE) - intel: add cross time-stamping freq difference adjustment - ocelot: - support forwarding of MRP frames in HW - support multiple bridges - support PTP Sync one-step timestamping - dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like learning, flooding etc. - ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350, SC7280 SoCs) - mt7601u: enable TDLS support - mt76: - add support for 802.3 rx frames (mt7915/mt7615) - mt7915 flash pre-calibration support - mt7921/mt7663 runtime power management fixes" * tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits) net: selftest: fix build issue if INET is disabled net: netrom: nr_in: Remove redundant assignment to ns net: tun: Remove redundant assignment to ret net: phy: marvell: add downshift support for M88E1240 net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255 net/sched: act_ct: Remove redundant ct get and check icmp: standardize naming of RFC 8335 PROBE constants bpf, selftests: Update array map tests for per-cpu batched ops bpf: Add batched ops support for percpu array bpf: Implement formatted output helpers with bstr_printf seq_file: Add a seq_bprintf function sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues net:nfc:digital: Fix a double free in digital_tg_recv_dep_req net: fix a concurrency bug in l2tp_tunnel_register() net/smc: Remove redundant assignment to rc mpls: Remove redundant assignment to err llc2: Remove redundant assignment to rc net/tls: Remove redundant initialization of record rds: Remove redundant assignment to nr_sig dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0 ...
2021-04-28net: mscc: ocelot: support PTP Sync one-step timestampingYangbo Lu1-1/+7
Although HWTSTAMP_TX_ONESTEP_SYNC existed in ioctl for hardware timestamp configuration, the PTP Sync one-step timestamping had never been supported. This patch is to truely support it. - ocelot_port_txtstamp_request() This function handles tx timestamp request by storing ptp_cmd(tx timestamp type) in OCELOT_SKB_CB(skb)->ptp_cmd, and additionally for two-step timestamp storing ts_id in OCELOT_SKB_CB(clone)->ptp_cmd. - ocelot_ptp_rew_op() During xmit, this function is called to get rew_op (rewriter option) by checking skb->cb for tx timestamp request, and configure to transmitting. Non-onestep-Sync packet with one-step timestamp request falls back to use two-step timestamp. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-28net: mscc: ocelot: convert to ocelot_port_txtstamp_request()Yangbo Lu1-2/+3
Convert to a common ocelot_port_txtstamp_request() for TX timestamp request handling. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-28net: dsa: free skb->cb usage in core driverYangbo Lu1-0/+8
Free skb->cb usage in core driver and let device drivers decide to use or not. The reason having a DSA_SKB_CB(skb)->clone was because dsa_skb_tx_timestamp() which may set the clone pointer was called before p->xmit() which would use the clone if any, and the device driver has no way to initialize the clone pointer. This patch just put memset(skb->cb, 0, sizeof(skb->cb)) at beginning of dsa_slave_xmit(). Some new features in the future, like one-step timestamp may need more bytes of skb->cb to use in dsa_skb_tx_timestamp(), and p->xmit(). Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-26Merge tag 'arm-drivers-5.13' of ↵Linus Torvalds3-25/+26
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "Updates for SoC specific drivers include a few subsystems that have their own maintainers but send them through the soc tree: TEE/OP-TEE: - Add tracepoints around calls to secure world Memory controller drivers: - Minor fixes for Renesas, Exynos, Mediatek and Tegra platforms - Add debug statistics to Tegra20 memory controller - Update Tegra bindings and convert to dtschema ARM SCMI Firmware: - Support for modular SCMI protocols and vendor specific extensions - New SCMI IIO driver - Per-cpu DVFS The other driver changes are all from the platform maintainers directly and reflect the drivers that don't fit into any other subsystem as well as treewide changes for a particular platform. SoCFPGA: - Various cleanups contributed by Krzysztof Kozlowski Mediatek: - add MT8183 support to mutex driver - MMSYS: use per SoC array to describe the possible routing - add MMSYS support for MT8183 and MT8167 - add support for PMIC wrapper with integrated arbiter - add support for MT8192/MT6873 Tegra: - Bug fixes to PMC and clock drivers NXP/i.MX: - Update SCU power domain driver to keep console domain power on. - Add missing ADC1 power domain to SCU power domain driver. - Update comments for single global power domain in SCU power domain driver. - Add i.MX51/i.MX53 unique id support to i.MX SoC driver. NXP/FSL SoC driver updates for v5.13 - Add ACPI support for RCPM driver - Use generic io{read,write} for QE drivers after performance optimized for PowerPC - Fix QBMAN probe to cleanup HW states correctly for kexec - Various cleanup and style fix for QBMAN/QE/GUTS drivers OMAP: - Preparation to use devicetree for genpd - ti-sysc needs iorange check improved when the interconnect target module has no control registers listed - ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to avoid issues with missing resources and unnecessary deferred probe - ti-sysc debug option can now detect more devices - ti-sysc now warns if an old incomplete devicetree data is found as we now rely on it being complete for am3 and 4 - soc init code needs to check for prcm and prm nodes for omap4/5 and dra7 - omap-prm driver needs to enable autoidle retention support for omap4 - omap5 clocks are missing gpmc and ocmc clock registers - pci-dra7xx now needs to use builtin_platform_driver instead of using builtin_platform_driver_probe for deferred probe to work Raspberry Pi: - Fix-up all RPi firmware drivers so as for unbind to happen in an orderly fashion - Support for RPi's PoE hat PWM bus Qualcomm - Improved detection for SCM calling conventions - Support for OEM specific wifi firmware path - Added drivers for SC7280/SM8350: RPMH, LLCC< AOSS QMP" * tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits) soc: aspeed: fix a ternary sign expansion bug memory: mtk-smi: Add device-link between smi-larb and smi-common memory: samsung: exynos5422-dmc: handle clk_set_parent() failure memory: renesas-rpc-if: fix possible NULL pointer dereference of resource clk: socfpga: fix iomem pointer cast on 64-bit soc: aspeed: Adapt to new LPC device tree layout pinctrl: aspeed-g5: Adapt to new LPC device tree layout ipmi: kcs: aspeed: Adapt to new LPC DTS layout ARM: dts: Remove LPC BMC and Host partitions dt-bindings: aspeed-lpc: Remove LPC partitioning soc: fsl: enable acpi support in RCPM driver soc: qcom: mdt_loader: Detect truncated read of segments soc: qcom: mdt_loader: Validate that p_filesz < p_memsz soc: qcom: pdr: Fix error return code in pdr_register_listener firmware: qcom_scm: Fix kernel-doc function names to match firmware: qcom_scm: Suppress sysfs bind attributes firmware: qcom_scm: Workaround lack of "is available" call on SC7180 firmware: qcom_scm: Reduce locking section for __get_convention() firmware: qcom_scm: Make __qcom_scm_is_call_available() return bool Revert "soc: fsl: qe: introduce qe_io{read,write}* wrappers" ...
2021-04-13Merge tag 'soc-fsl-next-v5.13' of ↵Arnd Bergmann1-25/+9
git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into arm/drivers NXP/FSL SoC driver updates for v5.13 - Add ACPI support for RCPM driver - Use generic io{read,write} for QE drivers after performance optimized for PowerPC - Fix QBMAN probe to cleanup HW states correctly for kexec - Various cleanup and style fix for QBMAN/QE/GUTS drivers * tag 'soc-fsl-next-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux: soc: fsl: enable acpi support in RCPM driver Revert "soc: fsl: qe: introduce qe_io{read,write}* wrappers" tty: serial: ucc_uart: replace qe_io{read,write}* wrappers by generic io{read,write}* soc: fsl: qe: replace qe_io{read,write}* wrappers by generic io{read,write}* soc: fsl: guts: fix comment syntax in file soc: fsl: guts: remove unneeded semicolon soc: fsl: qe: Use DEFINE_SPINLOCK() for spinlock soc: fsl: qbman: Delete useless kfree code soc: fsl: qbman: Ensure device cleanup is run for kexec Link: https://lore.kernel.org/r/20210409205719.27927-1-leoyang.li@nxp.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-08Merge tag 'memory-controller-drv-tegra-5.13' of ↵Arnd Bergmann1-0/+7
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/drivers Memory controller drivers for v5.13 - Tegra SoC 1. Few cleanups. 2. Add debug statistics to Tegra20 memory controller. 3. Update bindings and convert to dtschema. This update is not backwards compatible (ABI break) however the broken part was added recently (v5.11) and there are no users of it yet. * tag 'memory-controller-drv-tegra-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl: dt-bindings: memory: tegra20: mc: Convert to schema dt-bindings: memory: tegra124: emc: Replace core regulator with power domain dt-bindings: memory: tegra30: emc: Replace core regulator with power domain dt-bindings: memory: tegra20: emc: Replace core regulator with power domain memory: tegra: Print out info-level once per driver probe memory: tegra20: Protect debug code with a lock memory: tegra20: Correct comment to MC_STAT registers writes memory: tegra20: Add debug statistics memory: tegra: replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE Link: https://lore.kernel.org/r/20210407161333.73013-2-krzysztof.kozlowski@canonical.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-07time64.h: Consolidated PSEC_PER_SEC definitionAndy Shevchenko1-2/+0
We have currently three users of the PSEC_PER_SEC each of them defining it individually. Instead, move it to time64.h to be available for everyone. There is a new user coming with the same constant in use. It will also make its life easier. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-06Revert "soc: fsl: qe: introduce qe_io{read,write}* wrappers"Christophe Leroy1-25/+9
This reverts commit 6ac9b61786cc64ae5cbfb69413137656f72e8204. This commit was required because at that time, ioread/iowrite functions were sub-optimal on powerpc/32 compared to the architecture specific in_/out_ IO accessors. But there are now equivalent since commit 894fa235eb4c ("powerpc: inline iomap accessors"). Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2021-04-01memory: tegra20: Add debug statisticsDmitry Osipenko1-0/+7
Add debug statistics collection support. The statistics is available via debugfs in '/sys/kernel/debug/mc/stats', it shows percent of memory controller utilization for each memory client. This information is intended to help with debugging of memory performance issues, it already was proven to be useful by helping to improve memory bandwidth management of the display driver. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210319130933.23261-1-digetx@gmail.com
2021-03-26ARM: at91: pm: Move prototypes to mutually included headerLee Jones1-0/+16
Both the caller and the supplier's source file should have access to the include file containing the prototypes. Fixes the following W=1 kernel build warning(s): drivers/pinctrl/pinctrl-at91.c:1637:6: warning: no previous prototype for ‘at91_pinctrl_gpio_suspend’ [-Wmissing-prototypes] 1637 | void at91_pinctrl_gpio_suspend(void) | ^~~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/pinctrl-at91.c:1661:6: warning: no previous prototype for ‘at91_pinctrl_gpio_resume’ [-Wmissing-prototypes] 1661 | void at91_pinctrl_gpio_resume(void) | ^~~~~~~~~~~~~~~~~~~~~~~~ Cc: Russell King <linux@armlinux.org.uk> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210303124149.3149511-1-lee.jones@linaro.org
2021-03-24net: ocelot: replay switchdev events when joining bridgeVladimir Oltean1-3/+3
The premise of this change is that the switchdev port attributes and objects offloaded by ocelot might have been missed when we are joining an already existing bridge port, such as a bonding interface. The patch pulls these switchdev attributes and objects from the bridge, on behalf of the 'bridge port' net device which might be either the ocelot switch interface, or the bonding upper interface. The ocelot_net.c belongs strictly to the switchdev ocelot driver, while ocelot.c is part of a library shared with the DSA felix driver. The ocelot_port_bridge_leave function (part of the common library) used to call ocelot_port_vlan_filtering(false), something which is not necessary for DSA, since the framework deals with that already there. So we move this function to ocelot_switchdev_unsync, which is specific to the switchdev driver. The code movement described above makes ocelot_port_bridge_leave no longer return an error code, so we change its type from int to void. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-22firmware: raspberrypi: Introduce devm_rpi_firmware_get()Nicolas Saenz Julienne1-0/+8
It'll simplify the firmware handling for most consumers. Suggested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-03-22firmware: raspberrypi: Keep count of all consumersNicolas Saenz Julienne1-0/+2
When unbinding the firmware device we need to make sure it has no consumers left. Otherwise we'd leave them with a firmware handle pointing at freed memory. Keep a reference count of all consumers and introduce rpi_firmware_put() which will permit automatically decrease the reference count upon unbinding consumer drivers. Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-03-19net: ocelot: support multiple bridgesVladimir Oltean1-4/+3
The ocelot switches are a bit odd in that they do not have an STP state to put the ports into. Instead, the forwarding configuration is delayed from the typical port_bridge_join into stp_state_set, when the port enters the BR_STATE_FORWARDING state. I can only guess that the implementation of this quirk is the reason that led to the simplification of the driver such that only one bridge could be offloaded at a time. We can simplify the data structures somewhat, and introduce a per-port bridge device pointer and STP state, similar to how the LAG offload works now (there we have a per-port bonding device pointer and TX enabled state). This allows offloading multiple bridges with relative ease, while still keeping in place the quirk to delay the programming of the PGIDs. We actually need this change now because we need to remove the bogus restriction from ocelot_bridge_stp_state_set that ocelot->bridge_mask needs to contain BIT(port), otherwise that function is a no-op. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-17net: ocelot: Extend MRPHoratiu Vultur1-6/+2
This patch extends MRP support for Ocelot. It allows to have multiple rings and when the node has the MRC role it forwards MRP Test frames in HW. For MRM there is no change. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-17net: ocelot: Add PGID_BLACKHOLEHoratiu Vultur1-1/+3
Add a new PGID that is used not to forward frames anywhere. It is used by MRP to make sure that MRP Test frames will not reach CPU port. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-26Merge tag 'riscv-for-linus-5.12-mw0' of ↵Linus Torvalds1-0/+43
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Palmer Dabbelt: "A handful of new RISC-V related patches for this merge window: - A check to ensure drivers are properly using uaccess. This isn't manifesting with any of the drivers I'm currently using, but may catch errors in new drivers. - Some preliminary support for the FU740, along with the HiFive Unleashed it will appear on. - NUMA support for RISC-V, which involves making the arm64 code generic. - Support for kasan on the vmalloc region. - A handful of new drivers for the Kendryte K210, along with the DT plumbing required to boot on a handful of K210-based boards. - Support for allocating ASIDs. - Preliminary support for kernels larger than 128MiB. - Various other improvements to our KASAN support, including the utilization of huge pages when allocating the KASAN regions. We may have already found a bug with the KASAN_VMALLOC code, but it's passing my tests. There's a fix in the works, but that will probably miss the merge window. * tag 'riscv-for-linus-5.12-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (75 commits) riscv: Improve kasan population by using hugepages when possible riscv: Improve kasan population function riscv: Use KASAN_SHADOW_INIT define for kasan memory initialization riscv: Improve kasan definitions riscv: Get rid of MAX_EARLY_MAPPING_SIZE soc: canaan: Sort the Makefile alphabetically riscv: Disable KSAN_SANITIZE for vDSO riscv: Remove unnecessary declaration riscv: Add Canaan Kendryte K210 SD card defconfig riscv: Update Canaan Kendryte K210 defconfig riscv: Add Kendryte KD233 board device tree riscv: Add SiPeed MAIXDUINO board device tree riscv: Add SiPeed MAIX GO board device tree riscv: Add SiPeed MAIX DOCK board device tree riscv: Add SiPeed MAIX BiT board device tree riscv: Update Canaan Kendryte K210 device tree dt-bindings: add resets property to dw-apb-timer dt-bindings: fix sifive gpio properties dt-bindings: update sifive uart compatible string dt-bindings: update sifive clint compatible string ...
2021-02-23clk: Add RISC-V Canaan Kendryte K210 clock driverDamien Le Moal1-0/+2
Add a clock provider driver for the Canaan Kendryte K210 RISC-V SoC. This new driver with the compatible string "canaan,k210-clk" implements support for the full clock structure of the K210 SoC. Since it is required for the correct operation of the SoC, this driver is selected by default for compilation when the SOC_CANAAN option is selected. With this change, the k210-sysctl driver is turned into a simple platform driver which enables its power bus clock and triggers populating its child nodes. The sysctl driver retains the SOC early initialization code, but the implementation now relies on the new function k210_clk_early_init() provided by the new clk-k210 driver. The clock structure implemented and many of the coding ideas for the driver come from the work by Sean Anderson on the K210 support for the U-Boot project. Cc: Stephen Boyd <sboyd@kernel.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: linux-clk@vger.kernel.org Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-02-22Merge tag 'iommu-updates-v5.12' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: - ARM SMMU and Mediatek updates from Will Deacon: - Support for MT8192 IOMMU from Mediatek - Arm v7s io-pgtable extensions for MT8192 - Removal of TLBI_ON_MAP quirk - New Qualcomm compatible strings - Allow SVA without hardware broadcast TLB maintenance on SMMUv3 - Virtualization Host Extension support for SMMUv3 (SVA) - Allow SMMUv3 PMU perf driver to be built independently from IOMMU - Some tidy-up in IOVA and core code - Conversion of the AMD IOMMU code to use the generic IO-page-table framework - Intel VT-d updates from Lu Baolu: - Audit capability consistency among different IOMMUs - Add SATC reporting structure support - Add iotlb_sync_map callback support - SDHI support for Renesas IOMMU driver - Misc cleanups and other small improvments * tag 'iommu-updates-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (94 commits) iommu/amd: Fix performance counter initialization MAINTAINERS: repair file pattern in MEDIATEK IOMMU DRIVER iommu/mediatek: Fix error code in probe() iommu/mediatek: Fix unsigned domid comparison with less than zero iommu/vt-d: Parse SATC reporting structure iommu/vt-d: Add new enum value and structure for SATC iommu/vt-d: Add iotlb_sync_map callback iommu/vt-d: Move capability check code to cap_audit files iommu/vt-d: Audit IOMMU Capabilities and add helper functions iommu/vt-d: Fix 'physical' typos iommu: Properly pass gfp_t in _iommu_map() to avoid atomic sleeping iommu/vt-d: Fix compile error [-Werror=implicit-function-declaration] driver/perf: Remove ARM_SMMU_V3_PMU dependency on ARM_SMMU_V3 MAINTAINERS: Add entry for MediaTek IOMMU iommu/mediatek: Add mt8192 support iommu/mediatek: Remove unnecessary check in attach_device iommu/mediatek: Support master use iova over 32bit iommu/mediatek: Add iova reserved function iommu/mediatek: Support for multi domains iommu/mediatek: Add get_domain_id from dev->dma_range_map ...