| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
That really was meant to be a per netns attribute from the beginning.
The idea is that once proper isolation is in place in the main
namespace, additional demux in the child namespaces will be redundant.
Let's make child netns default rps mask empty by default.
To avoid bloating the netns with a possibly large cpumask, allocate
it on-demand during the first write operation.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset contains Netfilter updates for net-next:
1) Add safeguard to check for NULL tupe in objects updates via
NFT_MSG_NEWOBJ, this should not ever happen. From Alok Tiwari.
2) Incorrect pointer check in the new destroy rule command,
from Yang Yingliang.
3) Incorrect status bitcheck in nf_conntrack_udp_packet(),
from Florian Westphal.
4) Simplify seq_print_acct(), from Ilia Gavrilov.
5) Use 2-arg optimal variant of kfree_rcu() in IPVS,
from Julian Anastasov.
6) TCP connection enters CLOSE state in conntrack for locally
originated TCP reset packet from the reject target,
from Florian Westphal.
The fixes #2 and #3 in this series address issues from the previous pull
nf-next request in this net-next cycle.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Hosts can often receive neighbour discovery messages
that are not for them.
Use a dedicated drop reason to make clear the packet is dropped
for this normal case.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is a generic drop reason for any error detected
in ndisc_parse_options().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
kfree_skb() includes the location, it makes sense
to add it to consume_skb() as well.
After patch:
taskd_EventMana 8602 [004] 420.406239: skb:consume_skb: skbaddr=0xffff893a4a6d0500 location=unix_stream_read_generic
swapper 0 [011] 422.732607: skb:consume_skb: skbaddr=0xffff89597f68cee0 location=mlx4_en_free_tx_desc
discipline 9141 [043] 423.065653: skb:consume_skb: skbaddr=0xffff893a487e9c00 location=skb_consume_udp
swapper 0 [010] 423.073166: skb:consume_skb: skbaddr=0xffff8949ce9cdb00 location=icmpv6_rcv
borglet 8672 [014] 425.628256: skb:consume_skb: skbaddr=0xffff8949c42e9400 location=netlink_dump
swapper 0 [028] 426.263317: skb:consume_skb: skbaddr=0xffff893b1589dce0 location=net_rx_action
wget 14339 [009] 426.686380: skb:consume_skb: skbaddr=0xffff893a51b552e0 location=tcp_rcv_state_process
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix three cases of overproduction of wakeups:
(1) rxrpc_input_split_jumbo() conditionally notifies the app that there's
data for recvmsg() to collect if it queues some data - and then its
only caller, rxrpc_input_data(), goes and wakes up recvmsg() anyway.
Fix the rxrpc_input_data() to only do the wakeup in failure cases.
(2) If a DATA packet is received for a call by the I/O thread whilst
recvmsg() is busy draining the call's rx queue in the app thread, the
call will left on the recvmsg() queue for recvmsg() to pick up, even
though there isn't any data on it.
This can cause an unexpected recvmsg() with a 0 return and no MSG_EOR
set after the reply has been posted to a service call.
Fix this by discarding pending calls from the recvmsg() queue that
don't need servicing yet.
(3) Not-yet-completed calls get requeued after having data read from them,
even if they have no data to read.
Fix this by only requeuing them if they have data waiting on them; if
they don't, the I/O thread will requeue them when data arrives or they
fail.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/3386149.1676497685@warthog.procyon.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Thomas Gleixner:
"A single build fix for the PCI/MSI infrastructure.
The addition of the new alloc/free interfaces in this cycle forgot to
add stub functions for pci_msix_alloc_irq_at() and pci_msix_free_irq()
for the CONFIG_PCI_MSI=n case"
* tag 'irq-urgent-2023-02-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
PCI/MSI: Provide missing stubs for CONFIG_PCI_MSI=n
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
Pull irqchip updates from Marc Zyngier:
- New and improved irqdomain locking, closing a number of races that
became apparent now that we are able to probe drivers in parallel
- A bunch of OF node refcounting bugs have been fixed
- We now have a new IPI mux, lifted from the Apple AIC code and
made common. It is expected that riscv will eventually benefit
from it
- Two small fixes for the Broadcom L2 drivers
- Various cleanups and minor bug fixes
Link: https://lore.kernel.org/r/20230218143452.3817627-1-maz@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 regression fix from Will Deacon:
"Apologies for the _extremely_ late pull request here, but we had a
'perf' (i.e. CPU PMU) regression on the Apple M1 reported on Wednesday
[1] which was introduced by bd2756811766 ("perf: Rewrite core context
handling") during the merge window.
Mark and I looked into this and noticed an additional problem caused
by the same patch, where the 'CHAIN' event (used to combine two
adjacent 32-bit counters into a single 64-bit counter) was not being
filtered correctly. Mark posted a series on Thursday [2] which
addresses both of these regressions and I queued it the same day.
The changes are small, self-contained and have been confirmed to fix
the original regression.
Summary:
- Fix 'perf' regression for non-standard CPU PMU hardware (i.e. Apple
M1)"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: perf: reject CHAIN events at creation time
arm_pmu: fix event CPU filtering
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"Six hotfixes. Five are cc:stable: four for MM, one for nilfs2.
Also a MAINTAINERS update"
* tag 'mm-hotfixes-stable-2023-02-17-15-16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
nilfs2: fix underflow in second superblock position calculations
hugetlb: check for undefined shift on 32 bit architectures
mm/migrate: fix wrongly apply write bit after mkdirty on sparc64
MAINTAINERS: update FPU EMULATOR web page
mm/MADV_COLLAPSE: set EAGAIN on unexpected page refcount
mm/filemap: fix page end in filemap_get_read_batch
|
|
Users can specify the hugetlb page size in the mmap, shmget and
memfd_create system calls. This is done by using 6 bits within the flags
argument to encode the base-2 logarithm of the desired page size. The
routine hstate_sizelog() uses the log2 value to find the corresponding
hugetlb hstate structure. Converting the log2 value (page_size_log) to
potential hugetlb page size is the simple statement:
1UL << page_size_log
Because only 6 bits are used for page_size_log, the left shift can not be
greater than 63. This is fine on 64 bit architectures where a long is 64
bits. However, if a value greater than 31 is passed on a 32 bit
architecture (where long is 32 bits) the shift will result in undefined
behavior. This was generally not an issue as the result of the undefined
shift had to exactly match hugetlb page size to proceed.
Recent improvements in runtime checking have resulted in this undefined
behavior throwing errors such as reported below.
Fix by comparing page_size_log to BITS_PER_LONG before doing shift.
Link: https://lkml.kernel.org/r/20230216013542.138708-1-mike.kravetz@oracle.com
Link: https://lore.kernel.org/lkml/CA+G9fYuei_Tr-vN9GS7SfFyU1y9hNysnf=PB7kT0=yv4MiPgVg@mail.gmail.com/
Fixes: 42d7395feb56 ("mm: support more pagesizes for MAP_HUGETLB/SHM_HUGETLB")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reviewed-by: Jesper Juhl <jesperjuhl76@gmail.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Anders Roxell <anders.roxell@linaro.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Sasha Levin <sashal@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The bpf_fib_lookup() also looks up the neigh table.
This was done before bpf_redirect_neigh() was added.
In the use case that does not manage the neigh table
and requires bpf_fib_lookup() to lookup a fib to
decide if it needs to redirect or not, the bpf prog can
depend only on using bpf_redirect_neigh() to lookup the
neigh. It also keeps the neigh entries fresh and connected.
This patch adds a bpf_fib_lookup flag, SKIP_NEIGH, to avoid
the double neigh lookup when the bpf prog always call
bpf_redirect_neigh() to do the neigh lookup. The params->smac
output is skipped together when SKIP_NEIGH is set because
bpf_redirect_neigh() will figure out the smac also.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230217205515.3583372-1-martin.lau@linux.dev
|
|
iptables/nftables support responding to tcp packets with tcp resets.
The generated tcp reset packet passes through both output and postrouting
netfilter hooks, but conntrack will never see them because the generated
skb has its ->nfct pointer copied over from the packet that triggered the
reset rule.
If the reset rule is used for established connections, this
may result in the conntrack entry to be around for a very long
time (default timeout is 5 days).
One way to avoid this would be to not copy the nf_conn pointer
so that the rest packet passes through conntrack too.
Problem is that output rules might not have the same conntrack
zone setup as the prerouting ones, so its possible that the
reset skb won't find the correct entry. Generating a template
entry for the skb seems error prone as well.
Add an explicit "closing" function that switches a confirmed
conntrack entry to closed state and wire this up for tcp.
If the entry isn't confirmed, no action is needed because
the conntrack entry will never be committed to the table.
Reported-by: Russel King <linux@armlinux.org.uk>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Some of the devlink bits were tricky, but I think I got it right.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull drm fixes from Dave Airlie:
"Just a final collection of misc fixes, the biggest disables the
recently added dynamic debugging support, it has a regression that
needs some bigger fixes.
Otherwise a bunch of fixes across the board, vc4, amdgpu and vmwgfx
mostly, with some smaller i915 and ast fixes.
drm:
- dynamic debug disable for now
fbdev:
- deferred i/o device close fix
amdgpu:
- Fix GC11.x suspend warning
- Fix display warning
vc4:
- YUV planes fix
- hdmi display fix
- crtc reduced blanking fix
ast:
- fix start address computation
vmwgfx:
- fix bo/handle races
i915:
- gen11 WA fix"
* tag 'drm-fixes-2023-02-17' of git://anongit.freedesktop.org/drm/drm:
drm/amd/display: Fail atomic_check early on normalize_zpos error
drm/amd/amdgpu: fix warning during suspend
drm/vmwgfx: Do not drop the reference to the handle too soon
drm/vmwgfx: Stop accessing buffer objects which failed init
drm/i915/gen11: Wa_1408615072/Wa_1407596294 should be on GT list
drm: Disable dynamic debug as broken
drm/ast: Fix start address computation
fbdev: Fix invalid page access after closing deferred I/O devices
drm/vc4: crtc: Increase setup cost in core clock calculation to handle extreme reduced blanking
drm/vc4: hdmi: Always enable GCP with AVMUTE cleared
drm/vc4: Fix YUV plane handling when planes are in different buffers
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Multiple fixes in vc4 to address issues with YUV planes, HDMI and CRTC;
an invalid page access fix for fbdev, mark dynamic debug as broken, a
double free and refcounting fix for vmwgfx.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230216091905.i5wswy4dd74x4br5@houat
|
|
Janne reports that perf has been broken on Apple M1 as of commit:
bd27568117664b8b ("perf: Rewrite core context handling")
That commit replaced the pmu::filter_match() callback with
pmu::filter(), whose return value has the opposite polarity, with true
implying events should be ignored rather than scheduled. While an
attempt was made to update the logic in armv8pmu_filter() and
armpmu_filter() accordingly, the return value remains inverted in a
couple of cases:
* If the arm_pmu does not have an arm_pmu::filter() callback,
armpmu_filter() will always return whether the CPU is supported rather
than whether the CPU is not supported.
As a result, the perf core will not schedule events on supported CPUs,
resulting in a loss of events. Additionally, the perf core will
attempt to schedule events on unsupported CPUs, but this will be
rejected by armpmu_add(), which may result in a loss of events from
other PMUs on those unsupported CPUs.
* If the arm_pmu does have an arm_pmu::filter() callback, and
armpmu_filter() is called on a CPU which is not supported by the
arm_pmu, armpmu_filter() will return false rather than true.
As a result, the perf core will attempt to schedule events on
unsupported CPUs, but this will be rejected by armpmu_add(), which may
result in a loss of events from other PMUs on those unsupported CPUs.
This means a loss of events can be seen with any arm_pmu driver, but
with the ARMv8 PMUv3 driver (which is the only arm_pmu driver with an
arm_pmu::filter() callback) the event loss will be more limited and may
go unnoticed, which is how this issue evaded testing so far.
Fix the CPU filtering by performing this consistently in
armpmu_filter(), and remove the redundant arm_pmu::filter() callback and
armv8pmu_filter() implementation.
Commit bd2756811766 also silently removed the CHAIN event filtering from
armv8pmu_filter(), which will be addressed by a separate patch without
using the filter callback.
Fixes: bd2756811766 ("perf: Rewrite core context handling")
Reported-by: Janne Grunau <j@jannau.net>
Link: https://lore.kernel.org/asahi/20230215-arm_pmu_m1_regression-v1-1-f5a266577c8d@jannau.net/
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Asahi Lina <lina@asahilina.net>
Cc: Eric Curtin <ecurtin@redhat.com>
Tested-by: Janne Grunau <j@jannau.net>
Link: https://lore.kernel.org/r/20230216141240.3833272-2-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Fixes from the main networking tree only, probably because all
sub-trees have backed off and haven't submitted their changes.
None of the fixes here are particularly scary and no outstanding
regressions. In an ideal world the "current release" sections would be
empty at this stage but that never happens.
Current release - regressions:
- fix unwanted sign extension in netdev_stats_to_stats64()
Current release - new code bugs:
- initialize net->notrefcnt_tracker earlier
- devlink: fix netdev notifier chain corruption
- nfp: make sure mbox accesses in IPsec code are atomic
- ice: fix check for weight and priority of a scheduling node
Previous releases - regressions:
- ice: xsk: fix cleaning of XDP_TX frame, prevent inf loop
- igb: fix I2C bit banging config with external thermal sensor
Previous releases - always broken:
- sched: tcindex: update imperfect hash filters respecting rcu
- mpls: fix stale pointer if allocation fails during device rename
- dccp/tcp: avoid negative sk_forward_alloc by ipv6_pinfo.pktoptions
- remove WARN_ON_ONCE(sk->sk_forward_alloc) from
sk_stream_kill_queues()
- af_key: fix heap information leak
- ipv6: fix socket connection with DSCP (correct interpretation of
the tclass field vs fib rule matching)
- tipc: fix kernel warning when sending SYN message
- vmxnet3: read RSS information from the correct descriptor (eop)"
* tag 'net-6.2-final' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (35 commits)
devlink: Fix netdev notifier chain corruption
igb: conditionalize I2C bit banging on external thermal sensor support
net: mpls: fix stale pointer if allocation fails during device rename
net/sched: tcindex: search key must be 16 bits
tipc: fix kernel warning when sending SYN message
igb: Fix PPS input and output using 3rd and 4th SDP
net: use a bounce buffer for copying skb->mark
ixgbe: add double of VLAN header when computing the max MTU
i40e: add double of VLAN header when computing the max MTU
ixgbe: allow to increase MTU to 3K with XDP enabled
net: stmmac: Restrict warning on disabling DMA store and fwd mode
net/sched: act_ctinfo: use percpu stats
net: stmmac: fix order of dwmac5 FlexPPS parametrization sequence
ice: fix lost multicast packets in promisc mode
ice: Fix check for weight and priority of a scheduling node
bnxt_en: Fix mqprio and XDP ring checking logic
net: Fix unwanted sign extension in netdev_stats_to_stats64()
net/usb: kalmia: Don't pass act_len in usb_bulk_msg error path
net: openvswitch: fix possible memory leak in ovs_meter_cmd_set()
af_key: Fix heap information leak
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Leon Romanovsky says:
====================
mlx5-next changes
Following previous conversations [1] and our clear commitment to do
the TC work [2], please pull mlx5-next shared branch, which includes
low-level steering logic to allow RoCEv2 traffic to be encrypted/
decrypted through IPsec.
[1] https://lore.kernel.org/all/20230126230815.224239-1-saeed@kernel.org/
[2] https://lore.kernel.org/all/Y+Z7lVVWqnRBiPh2@nvidia.com/
* 'mlx5-next' of https://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Configure IPsec steering for egress RoCEv2 traffic
net/mlx5: Configure IPsec steering for ingress RoCEv2 traffic
net/mlx5: Add IPSec priorities in RDMA namespaces
net/mlx5: Implement new destination type TABLE_TYPE
net/mlx5: Introduce new destination type TABLE_TYPE
====================
Link: https://lore.kernel.org/r/20230215095624.1365200-1-leon@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Major stack changes:
* EHT channel puncturing support (client & AP)
* some support for AP MLD without mac80211
* fixes for A-MSDU on mesh connections
Major driver changes:
iwlwifi
* EHT rate reporting
* Bump FW API to 74 for AX devices
* STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware
mt76
* switch to using page pool allocator
* mt7996 EHT (Wi-Fi 7) support
* Wireless Ethernet Dispatch (WED) reset support
libertas
* WPS enrollee support
brcmfmac
* Rename Cypress 89459 to BCM4355
* BCM4355 and BCM4377 support
mwifiex
* SD8978 chipset support
rtl8xxxu
* LED support
ath12k
* new driver for Qualcomm Wi-Fi 7 devices
ath11k
* IPQ5018 support
* Fine Timing Measurement (FTM) responder role support
* channel 177 support
ath10k
* store WLAN firmware version in SMEM image table
* tag 'wireless-next-2023-03-16' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (207 commits)
wifi: brcmfmac: p2p: Introduce generic flexible array frame member
wifi: mac80211: add documentation for amsdu_mesh_control
wifi: cfg80211: remove gfp parameter from cfg80211_obss_color_collision_notify description
wifi: mac80211: always initialize link_sta with sta
wifi: mac80211: pass 'sta' to ieee80211_rx_data_set_sta()
wifi: cfg80211: Set SSID if it is not already set
wifi: rtw89: move H2C of del_pkt_offload before polling FW status ready
wifi: rtw89: use readable return 0 in rtw89_mac_cfg_ppdu_status()
wifi: rtw88: usb: drop now unnecessary URB size check
wifi: rtw88: usb: send Zero length packets if necessary
wifi: rtw88: usb: Set qsel correctly
wifi: mac80211: fix off-by-one link setting
wifi: mac80211: Fix for Rx fragmented action frames
wifi: mac80211: avoid u32_encode_bits() warning
wifi: mac80211: Don't translate MLD addresses for multicast
wifi: cfg80211: call reg_notifier for self managed wiphy from driver hint
wifi: cfg80211: get rid of gfp in cfg80211_bss_color_notify
wifi: nl80211: Allow authentication frames and set keys on NAN interface
wifi: mac80211: fix non-MLO station association
wifi: mac80211: Allow NSS change only up to capability
...
====================
Link: https://lore.kernel.org/r/20230216105406.208416-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a new flag IORING_REGISTER_USE_REGISTERED_RING (set via the high bit
of the opcode) to treat the fd as a registered index rather than a file
descriptor.
This makes it possible for a library to open an io_uring, register the
ring fd, close the ring fd, and subsequently use the ring entirely via
registered index.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Link: https://lore.kernel.org/r/f2396369e638284586b069dbddffb8c992afba95.1676419314.git.josh@joshtriplett.org
[axboe: remove extra high bit clear]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Cited commit changed devlink to register its netdev notifier block on
the global netdev notifier chain instead of on the per network namespace
one.
However, when changing the network namespace of the devlink instance,
devlink still tries to unregister its notifier block from the chain of
the old namespace and register it on the chain of the new namespace.
This results in corruption of the notifier chains, as the same notifier
block is registered on two different chains: The global one and the per
network namespace one. In turn, this causes other problems such as the
inability to dismantle namespaces due to netdev reference count issues.
Fix by preventing devlink from moving its notifier block between
namespaces.
Reproducer:
# echo "10 1" > /sys/bus/netdevsim/new_device
# ip netns add test123
# devlink dev reload netdevsim/netdevsim10 netns test123
# ip netns del test123
[ 71.935619] unregister_netdevice: waiting for lo to become free. Usage count = 2
[ 71.938348] leaked reference.
Fixes: 565b4824c39f ("devlink: change port event netdev notifier from per-net to global")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230215073139.1360108-1-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The tc action act_connmark was using shared stats and taking the per
action lock in the datapath. Improve it by using percpu stats and rcu.
perf before:
- 13.55% tcf_connmark_act
- 81.18% _raw_spin_lock
80.46% native_queued_spin_lock_slowpath
perf after:
- 2.85% tcf_connmark_act
tdc results:
1..15
ok 1 2002 - Add valid connmark action with defaults
ok 2 56a5 - Add valid connmark action with control pass
ok 3 7c66 - Add valid connmark action with control drop
ok 4 a913 - Add valid connmark action with control pipe
ok 5 bdd8 - Add valid connmark action with control reclassify
ok 6 b8be - Add valid connmark action with control continue
ok 7 d8a6 - Add valid connmark action with control jump
ok 8 aae8 - Add valid connmark action with zone argument
ok 9 2f0b - Add valid connmark action with invalid zone argument
ok 10 9305 - Add connmark action with unsupported argument
ok 11 71ca - Add valid connmark action and replace it
ok 12 5f8f - Add valid connmark action with cookie
ok 13 c506 - Replace connmark with invalid goto chain control
ok 14 6571 - Delete connmark action with valid index
ok 15 3426 - Delete connmark action with invalid index
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The tc action act_nat was using shared stats and taking the per action
lock in the datapath. Improve it by using percpu stats and rcu.
perf before:
- 10.48% tcf_nat_act
- 81.83% _raw_spin_lock
81.08% native_queued_spin_lock_slowpath
perf after:
- 0.48% tcf_nat_act
tdc results:
1..27
ok 1 7565 - Add nat action on ingress with default control action
ok 2 fd79 - Add nat action on ingress with pipe control action
ok 3 eab9 - Add nat action on ingress with continue control action
ok 4 c53a - Add nat action on ingress with reclassify control action
ok 5 76c9 - Add nat action on ingress with jump control action
ok 6 24c6 - Add nat action on ingress with drop control action
ok 7 2120 - Add nat action on ingress with maximum index value
ok 8 3e9d - Add nat action on ingress with invalid index value
ok 9 f6c9 - Add nat action on ingress with invalid IP address
ok 10 be25 - Add nat action on ingress with invalid argument
ok 11 a7bd - Add nat action on ingress with DEFAULT IP address
ok 12 ee1e - Add nat action on ingress with ANY IP address
ok 13 1de8 - Add nat action on ingress with ALL IP address
ok 14 8dba - Add nat action on egress with default control action
ok 15 19a7 - Add nat action on egress with pipe control action
ok 16 f1d9 - Add nat action on egress with continue control action
ok 17 6d4a - Add nat action on egress with reclassify control action
ok 18 b313 - Add nat action on egress with jump control action
ok 19 d9fc - Add nat action on egress with drop control action
ok 20 a895 - Add nat action on egress with DEFAULT IP address
ok 21 2572 - Add nat action on egress with ANY IP address
ok 22 37f3 - Add nat action on egress with ALL IP address
ok 23 6054 - Add nat action on egress with cookie
ok 24 79d6 - Add nat action on ingress with cookie
ok 25 4b12 - Replace nat action with invalid goto chain control
ok 26 b811 - Delete nat action with valid index
ok 27 a521 - Delete nat action with invalid index
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Silence run-time memcpy() false positive warning when processing
management frames:
memcpy: detected field-spanning write (size 27) of single field "&mgmt_frame->u" at drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c:1469 (size 26)
Due to this (soon to be fixed) GCC bug[1], FORTIFY_SOURCE (via
__builtin_dynamic_object_size) doesn't recognize that the union may end
with a flexible array, and returns "26" (the fixed size of the union),
rather than the remaining size of the allocation. Add an explicit
flexible array member and set it as the destination here, so that we
get the correct coverage for the memcpy().
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101832
Reported-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Arend van Spriel <aspriel@gmail.com>
Cc: Franky Lin <franky.lin@broadcom.com>
Cc: Hante Meuleman <hante.meuleman@broadcom.com>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Brian Henriquez <brian.henriquez@cypress.com>
Cc: linux-wireless@vger.kernel.org
Cc: brcm80211-dev-list.pdl@broadcom.com
Cc: SHA-cyfmac-dev-list@infineon.com
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230215224110.never.022-kees@kernel.org
[rename 'frame' to 'body']
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The rsvp classifier has served us well for about a quarter of a century but has
has not been getting much maintenance attention due to lack of known users.
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The tcindex classifier has served us well for about a quarter of a century
but has not been getting much TLC due to lack of known users. Most recently
it has become easy prey to syzkaller. For this reason, we are retiring it.
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2023-02-10
1) From Roi and Mark: MultiPort eswitch support
MultiPort E-Switch builds on newer hardware's capabilities and introduces
a mode where a single E-Switch is used and all the vports and physical
ports on the NIC are connected to it.
The new mode will allow in the future a decrease in the memory used by the
driver and advanced features that aren't possible today.
This represents a big change in the current E-Switch implantation in mlx5.
Currently, by default, each E-Switch manager manages its E-Switch.
Steering rules in each E-Switch can only forward traffic to the native
physical port associated with that E-Switch. While there are ways to target
non-native physical ports, for example using a bond or via special TC
rules. None of the ways allows a user to configure the driver
to operate by default in such a mode nor can the driver decide
to move to this mode by default as it's user configuration-driven right now.
While MultiPort E-Switch single FDB mode is the preferred mode, older
generations of ConnectX hardware couldn't support this mode so it was never
implemented. Now that there is capable hardware present, start the
transition to having this mode by default.
Introduce a devlink parameter to control MultiPort Eswitch single FDB mode.
This will allow users to select this mode on their system right now
and in the future will allow the driver to move to this mode by default.
2) From Jiri: Improvements and fixes for mlx5 netdev's devlink logic
2.1) Cleanups related to mlx5's devlink port logic
2.2) Move devlink port registration to be done before netdev alloc
2.3) Create auxdev devlink instance in the same ns as parent devlink
2.4) Suspend auxiliary devices only in case of PCI device suspend
* tag 'mlx5-updates-2023-02-10' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: Suspend auxiliary devices only in case of PCI device suspend
net/mlx5: Remove "recovery" arg from mlx5_load_one() function
net/mlx5e: Create auxdev devlink instance in the same ns as parent devlink
net/mlx5e: Move devlink port registration to be done before netdev alloc
net/mlx5e: Move dl_port to struct mlx5e_dev
net/mlx5e: Replace usage of mlx5e_devlink_get_dl_port() by netdev->devlink_port
net/mlx5e: Pass mdev to mlx5e_devlink_port_register()
net/mlx5: Remove outdated comment
net/mlx5e: TC, Remove redundant parse_attr argument
net/mlx5e: Use a simpler comparison for uplink rep
net/mlx5: Lag, Add single RDMA device in multiport mode
net/mlx5: Lag, set different uplink vport metadata in multiport eswitch mode
net/mlx5: E-Switch, rename bond update function to be reused
net/mlx5e: TC, Add peer flow in mpesw mode
net/mlx5: Lag, Control MultiPort E-Switch single FDB mode
====================
Link: https://lore.kernel.org/r/20230214221239.159033-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix a bug in trace point definition for devlink health report, as
TP_STRUCT_entry of reporter_name should get reporter_name and not msg.
Note no fixes tag as this is a harmless bug as both reporter_name and
msg are strings and TP_fast_assign for this entry is correct.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently the freed element in bpf memory allocator may be immediately
reused, for htab map the reuse will reinitialize special fields in map
value (e.g., bpf_spin_lock), but lookup procedure may still access
these special fields, and it may lead to hard-lockup as shown below:
NMI backtrace for cpu 16
CPU: 16 PID: 2574 Comm: htab.bin Tainted: G L 6.1.0+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
RIP: 0010:queued_spin_lock_slowpath+0x283/0x2c0
......
Call Trace:
<TASK>
copy_map_value_locked+0xb7/0x170
bpf_map_copy_value+0x113/0x3c0
__sys_bpf+0x1c67/0x2780
__x64_sys_bpf+0x1c/0x20
do_syscall_64+0x30/0x60
entry_SYSCALL_64_after_hwframe+0x46/0xb0
......
</TASK>
For htab map, just like the preallocated case, these is no need to
initialize these special fields in map value again once these fields
have been initialized. For preallocated htab map, these fields are
initialized through __GFP_ZERO in bpf_map_area_alloc(), so do the
similar thing for non-preallocated htab in bpf memory allocator. And
there is no need to use __GFP_ZERO for per-cpu bpf memory allocator,
because __alloc_percpu_gfp() does it implicitly.
Fixes: 0fd7c5d43339 ("bpf: Optimize call_rcu in non-preallocated hash map.")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20230215082132.3856544-2-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
No users left now that btrfs takes REQ_OP_WRITE bios from iomap and
splits and converts them to REQ_OP_ZONE_APPEND internally.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
bio_split_rw can be used by file systems to split and incoming write
bio into multiple bios fitting the hardware limit for use as ZONE_APPEND
bios. Export it for initial use in btrfs.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
cfg80211_obss_color_collision_notify description
Get rid of gfp parameter from cfg80211_obss_color_collision_notify
routine description.
Fixes: 935ef47b16cc ("wifi: cfg80211: get rid of gfp in cfg80211_bss_color_notify")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/2da652e2cd5c7903191091ae9757718f1be802a1.1676453359.git.lorenzo@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add LVTS thermal controllers dt-binding definition for mt8192 and mt8195.
Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230209105628.50294-3-bchihi@baylibre.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Merge cpuidle updates, PM core updates and changes related to system
sleep handling for 6.3-rc1:
- Make the TEO cpuidle governor check CPU utilization in order to refine
idle state selection (Kajetan Puchalski).
- Make Kconfig select the haltpoll cpuidle governor when the haltpoll
cpuidle driver is selected and replace a default_idle() call in that
driver with arch_cpu_idle() which allows MWAIT to be used (Li
RongQing).
- Add Emerald Rapids Xeon support to the intel_idle driver (Artem
Bityutskiy).
- Add ARCH_SUSPEND_POSSIBLE dependencies for ARMv4 cpuidle drivers to
avoid randconfig build failures (Arnd Bergmann).
- Make kobj_type structures used in the cpuidle sysfs interface
constant (Thomas Weißschuh).
- Make the cpuidle driver registration code update microsecond values
of idle state parameters in accordance with their nanosecond values
if they are provided (Rafael Wysocki).
- Make the PSCI cpuidle driver prevent topology CPUs from being
suspended on PREEMPT_RT (Krzysztof Kozlowski).
- Document that pm_runtime_force_suspend() cannot be used with
DPM_FLAG_SMART_SUSPEND (Richard Fitzgerald).
- Add EXPORT macros for exporting PM functions from drivers (Richard
Fitzgerald).
- Drop "select SRCU" from system sleep Kconfig (Paul E. McKenney).
- Remove /** from non-kernel-doc comments in hibernation code (Randy
Dunlap).
* pm-cpuidle:
cpuidle: psci: Do not suspend topology CPUs on PREEMPT_RT
cpuidle: driver: Update microsecond values of state parameters as needed
cpuidle: sysfs: make kobj_type structures constant
cpuidle: add ARCH_SUSPEND_POSSIBLE dependencies
intel_idle: add Emerald Rapids Xeon support
cpuidle-haltpoll: Replace default_idle() with arch_cpu_idle()
cpuidle-haltpoll: select haltpoll governor
cpuidle: teo: Introduce util-awareness
cpuidle: teo: Optionally skip polling states in teo_find_shallower_state()
* pm-core:
PM: Add EXPORT macros for exporting PM functions
PM: runtime: Document that force_suspend() is incompatible with SMART_SUSPEND
* pm-sleep:
PM: sleep: Remove "select SRCU"
PM: hibernate: swap: don't use /** for non-kernel-doc comments
|
|
'acpi-maintainers'
Merge ACPI processor driver changes, ACPI table parser changes, ACPI
device enumeration changes related to PNP and a MAINTAINERS update
related to ACPI for 6.3-rc1:
- Drop an unnecessary (void *) conversion from the ACPI processor
driver (Zhou jie).
- Modify the ACPI processor performance library code to use the "no
limit" frequency QoS as appropriate and adjust the intel_pstate
driver accordingly (Rafael Wysocki).
- Add support for NBFT to the ACPI table parser (Stuart Hayes).
- Introduce list of known non-PNP devices to avoid enumerating some of
them as PNP devices (Rafael Wysocki).
- Add x86 ACPI paths to the ACPI entry in MAINTAINERS to allow scripts
to report the actual maintainers information (Rafael Wysocki).
* acpi-processor:
cpufreq: intel_pstate: Drop ACPI _PSS states table patching
ACPI: processor: perflib: Avoid updating frequency QoS unnecessarily
ACPI: processor: perflib: Use the "no limit" frequency QoS
ACPI: processor: idle: Drop unnecessary (void *) conversion
* acpi-tables:
ACPI: tables: Add support for NBFT
* acpi-pnp:
ACPI: PNP: Introduce list of known non-PNP devices
* acpi-maintainers:
MAINTAINERS: Add x86 ACPI paths to the ACPI entry
|
|
Merge ACPICA changes for 6.3-rc1:
- Drop port I/O validation for some regions to avoid AML failures due
to rejections of legitimate port I/O writes (Mario Limonciello).
- Constify acpi_get_handle() pathname argument to allow its callers to
pass conts pathnames to it (Sakari Ailus).
- Prevent acpi_ns_simple_repair() from crashing in some cases when
AE_AML_NO_RETURN_VALUE should be returned (Daniil Tatianin).
- Fix typo in CDAT DSMAS struct definition (Lukas Wunner).
* acpica:
ACPICA: Fix typo in CDAT DSMAS struct definition
ACPICA: nsrepair: handle cases without a return value correctly
ACPICA: Constify pathname argument for acpi_get_handle()
ACPICA: Drop port I/O validation for some regions
|
|
Commit e48c414ee61f ("[INET]: Generalise the TCP sock ID lookup routines")
commented out the definition of SOCK_REFCNT_DEBUG in 2005 and later another
commit 463c84b97f24 ("[NET]: Introduce inet_connection_sock") removed it.
Since we could track all of them through bpf and kprobe related tools
and the feature could print loads of information which might not be
that helpful even under a little bit pressure, the whole feature which
has been inactive for many years is no longer supported.
Link: https://lore.kernel.org/lkml/20230211065153.54116-1-kerneljasonxing@gmail.com/
Suggested-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add IPSec flow steering priorities in RDMA namespaces. This allows
adding tables/rules to forward RoCEv2 traffic to the IPSec crypto
tables in NIC_TX domain, and accept RoCEv2 traffic from NIC_RX domain.
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Implement new destination type to support flow transition between
different table types.
e.g. from NIC_RX to RDMA_RX or from RDMA_TX to NIC_TX.
The new destination is described in the tracepoint as follows:
"mlx5_fs_add_rule: rule=00000000d53cd0ed fte=0000000048a8a6ed index=0 sw_action=<> [dst] flow_table_type=7 id:262152"
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
This new destination type supports flow transition between different
table types, e.g. from NIC_RX to RDMA_RX or from RDMA_TX to NIC_TX.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
For erofs_map_blocks() and erofs_map_blocks_flatmode(), the flags
argument is always EROFS_GET_BLOCKS_RAW. Thus remove the unused flags
parameter for these two functions.
Besides EROFS_GET_BLOCKS_RAW is originally introduced for reading
compressed (raw) data for compressed files. However it's never used
actually and let's remove it now.
Signed-off-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20230209024825.17335-2-jefflexu@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
As new flags introduced, the corresponding print symbols for trace are
not added accordingly. Add these missing print symbols for these flags.
Signed-off-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20230209024825.17335-1-jefflexu@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Actually we could pass in inodes directly to clean up all callers.
Also rename iloc() as erofs_iloc().
Link: https://lore.kernel.org/r/20230114150823.432069-1-xiang@kernel.org
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
No need to have dl_port which is tightly coupled with mlx5e code
in mlx5 core code. Move it to struct mlx5e_dev and loose
mlx5e_devlink_get_dl_port() helper.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
In MultiPort E-Switch mode a single RDMA is created. This device has multiple
RDMA ports that represent the uplink ports that are connected to the E-Switch.
Account for this when creating the RDMA device so it has an additional port for
the non native uplink.
As a side effect of this patch, use shared fdb in multiport eswitch mode.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
In a follow-up commit multiport eswitch mode will use a shared fdb.
In shared fdb there is a single eswitch fdb and traffic could come from any
port. to distinguish between the ports set a different metadata per uplink port.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
This reverts commit 3f13ab7c80fdb0ada86a8e3e818960bc1ccbaa59 as a patch
it depends on caused a few problems.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230214183308.1658775-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
|
|
Currently the regulatory driver does not call the regulatory callback
reg_notifier for self managed wiphys. Sometimes driver needs cfg80211
to calculate the info of ieee80211_channel such as flags and power,
and driver needs to get the info of ieee80211_channel after hint of
driver, but driver does not know when calculation of the info of
ieee80211_channel become finished, so add notify to driver in
reg_process_self_managed_hint() from cfg80211 is a good way, then
driver could get the correct info in callback of reg_notifier.
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Link: https://lore.kernel.org/r/20230201065313.27203-1-quic_wgong@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
