Age | Commit message (Collapse) | Author | Files | Lines |
|
css_iter and task_iter should be used in rcu section. Specifically, in
sleepable progs explicit bpf_rcu_read_lock() is needed before use these
iters. In normal bpf progs that have implicit rcu_read_lock(), it's OK to
use them directly.
This patch adds a new a KF flag KF_RCU_PROTECTED for bpf_iter_task_new and
bpf_iter_css_new. It means the kfunc should be used in RCU CS. We check
whether we are in rcu cs before we want to invoke this kfunc. If the rcu
protection is guaranteed, we would let st->type = PTR_TO_STACK | MEM_RCU.
Once user do rcu_unlock during the iteration, state MEM_RCU of regs would
be cleared. is_iter_reg_valid_init() will reject if reg->type is UNTRUSTED.
It is worth noting that currently, bpf_rcu_read_unlock does not
clear the state of the STACK_ITER reg, since bpf_for_each_spilled_reg
only considers STACK_SPILL. This patch also let bpf_for_each_spilled_reg
search STACK_ITER.
Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231018061746.111364-6-zhouchuyi@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch makes some preparations for using css_task_iter_*() in BPF
Program.
1. Flags CSS_TASK_ITER_* are #define-s and it's not easy for bpf prog to
use them. Convert them to enum so bpf prog can take them from vmlinux.h.
2. In the next patch we will add css_task_iter_*() in common kfuncs which
is not safe. Since css_task_iter_*() does spin_unlock_irq() which might
screw up irq flags depending on the context where bpf prog is running.
So we should use irqsave/irqrestore here and the switching is harmless.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20231018061746.111364-2-zhouchuyi@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
A few drivers were missing a xdp_do_flush() invocation after
XDP_REDIRECT.
Add three helper functions each for one of the per-CPU lists. Return
true if the per-CPU list is non-empty and flush the list.
Add xdp_do_check_flushed() which invokes each helper functions and
creates a warning if one of the functions had a non-empty list.
Hide everything behind CONFIG_DEBUG_NET.
Suggested-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20231016125738.Yt79p1uF@linutronix.de
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-10-16
We've added 90 non-merge commits during the last 25 day(s) which contain
a total of 120 files changed, 3519 insertions(+), 895 deletions(-).
The main changes are:
1) Add missed stats for kprobes to retrieve the number of missed kprobe
executions and subsequent executions of BPF programs, from Jiri Olsa.
2) Add cgroup BPF sockaddr hooks for unix sockets. The use case is
for systemd to reimplement the LogNamespace feature which allows
running multiple instances of systemd-journald to process the logs
of different services, from Daan De Meyer.
3) Implement BPF CPUv4 support for s390x BPF JIT, from Ilya Leoshkevich.
4) Improve BPF verifier log output for scalar registers to better
disambiguate their internal state wrt defaults vs min/max values
matching, from Andrii Nakryiko.
5) Extend the BPF fib lookup helpers for IPv4/IPv6 to support retrieving
the source IP address with a new BPF_FIB_LOOKUP_SRC flag,
from Martynas Pumputis.
6) Add support for open-coded task_vma iterator to help with symbolization
for BPF-collected user stacks, from Dave Marchevsky.
7) Add libbpf getters for accessing individual BPF ring buffers which
is useful for polling them individually, for example, from Martin Kelly.
8) Extend AF_XDP selftests to validate the SHARED_UMEM feature,
from Tushar Vyavahare.
9) Improve BPF selftests cross-building support for riscv arch,
from Björn Töpel.
10) Add the ability to pin a BPF timer to the same calling CPU,
from David Vernet.
11) Fix libbpf's bpf_tracing.h macros for riscv to use the generic
implementation of PT_REGS_SYSCALL_REGS() to access syscall arguments,
from Alexandre Ghiti.
12) Extend libbpf to support symbol versioning for uprobes, from Hengqi Chen.
13) Fix bpftool's skeleton code generation to guarantee that ELF data
is 8 byte aligned, from Ian Rogers.
14) Inherit system-wide cpu_mitigations_off() setting for Spectre v1/v4
security mitigations in BPF verifier, from Yafang Shao.
15) Annotate struct bpf_stack_map with __counted_by attribute to prepare
BPF side for upcoming __counted_by compiler support, from Kees Cook.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (90 commits)
bpf: Ensure proper register state printing for cond jumps
bpf: Disambiguate SCALAR register state output in verifier logs
selftests/bpf: Make align selftests more robust
selftests/bpf: Improve missed_kprobe_recursion test robustness
selftests/bpf: Improve percpu_alloc test robustness
selftests/bpf: Add tests for open-coded task_vma iter
bpf: Introduce task_vma open-coded iterator kfuncs
selftests/bpf: Rename bpf_iter_task_vma.c to bpf_iter_task_vmas.c
bpf: Don't explicitly emit BTF for struct btf_iter_num
bpf: Change syscall_nr type to int in struct syscall_tp_t
net/bpf: Avoid unused "sin_addr_len" warning when CONFIG_CGROUP_BPF is not set
bpf: Avoid unnecessary audit log for CPU security mitigations
selftests/bpf: Add tests for cgroup unix socket address hooks
selftests/bpf: Make sure mount directory exists
documentation/bpf: Document cgroup unix socket address hooks
bpftool: Add support for cgroup unix socket address hooks
libbpf: Add support for cgroup unix socket address hooks
bpf: Implement cgroup sockaddr hooks for unix sockets
bpf: Add bpf_sock_addr_set_sun_path() to allow writing unix sockaddr from bpf
bpf: Propagate modified uaddrlen from cgroup sockaddr programs
...
====================
Link: https://lore.kernel.org/r/20231016204803.30153-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently page_pool_alloc_frag() is not supported in 32-bit
arch with 64-bit DMA because of the overlap issue between
pp_frag_count and dma_addr_upper in 'struct page' for those
arches, which seems to be quite common, see [1], which means
driver may need to handle it when using fragment API.
It is assumed that the combination of the above arch with an
address space >16TB does not exist, as all those arches have
64b equivalent, it seems logical to use the 64b version for a
system with a large address space. It is also assumed that dma
address is page aligned when we are dma mapping a page aligned
buffer, see [2].
That means we're storing 12 bits of 0 at the lower end for a
dma address, we can reuse those bits for the above arches to
support 32b+12b, which is 16TB of memory.
If we make a wrong assumption, a warning is emitted so that
user can report to us.
1. https://lore.kernel.org/all/20211117075652.58299-1-linyunsheng@huawei.com/
2. https://lore.kernel.org/all/20230818145145.4b357c89@kernel.org/
Tested-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
CC: Lorenzo Bianconi <lorenzo@kernel.org>
CC: Alexander Duyck <alexander.duyck@gmail.com>
CC: Liang Chen <liangchen.linux@gmail.com>
CC: Guillaume Tucker <guillaume.tucker@collabora.com>
CC: Matthew Wilcox <willy@infradead.org>
CC: Linux-MM <linux-mm@kvack.org>
Link: https://lore.kernel.org/r/20231013064827.61135-2-linyunsheng@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A few networking drivers including bnx2x, bnxt, qede, and idpf call
tcp_gro_complete as part of offloading TCP GRO. The function is only
defined if CONFIG_INET is true, since its TCP specific and is meaningless
if the kernel lacks IP networking support.
The combination of trying to use the complex network drivers with
CONFIG_NET but not CONFIG_INET is rather unlikely in practice: most use
cases are going to need IP networking.
The tcp_gro_complete function just sets some data in the socket buffer for
use in processing the TCP packet in the event that the GRO was offloaded to
the device. If the kernel lacks TCP support, such setup will simply go
unused.
The bnx2x, bnxt, and qede drivers wrap their TCP offload support in
CONFIG_INET checks and skip handling on such kernels.
The idpf driver did not check CONFIG_INET and thus fails to link if the
kernel is configured with CONFIG_NET=y, CONFIG_IDPF=(m|y), and
CONFIG_INET=n.
While checking CONFIG_INET does allow the driver to bypass significantly
more instructions in the event that we know TCP networking isn't supported,
the configuration is unlikely to be used widely.
Rather than require driver authors to care about this, stub the
tcp_gro_complete function when CONFIG_INET=n. This allows drivers to be
left as-is. It does mean the idpf driver will perform slightly more work
than strictly necessary when CONFIG_INET=n, since it will still execute
some of the skb setup in idpf_rx_rsc. However, that work would be performed
in the case where CONFIG_INET=y anyways.
I did not change the existing drivers, since they appear to wrap a
significant portion of code when CONFIG_INET=n. There is little benefit in
trashing these drivers just to unwrap and remove the CONFIG_INET check.
Using a stub for tcp_gro_complete is still beneficial, as it means future
drivers no longer need to worry about this case of CONFIG_NET=y and
CONFIG_INET=n, which should reduce noise from buildbots that check such a
configuration.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Link: https://lore.kernel.org/r/20231013185502.1473541-1-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
TCP pingpong threshold is 1 by default. But some applications, like SQL DB
may prefer a higher pingpong threshold to activate delayed acks in quick
ack mode for better performance.
The pingpong threshold and related code were changed to 3 in the year
2019 in:
commit 4a41f453bedf ("tcp: change pingpong threshold to 3")
And reverted to 1 in the year 2022 in:
commit 4d8f24eeedc5 ("Revert "tcp: change pingpong threshold to 3"")
There is no single value that fits all applications.
Add net.ipv4.tcp_pingpong_thresh sysctl tunable, so it can be tuned for
optimal performance based on the application needs.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/1697056244-21888-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add an initial user for the newly added tcf_set_drop_reason() helper to set the
drop reason for internal errors leading to TC_ACT_SHOT inside {__,}tcf_classify().
Right now this only adds a very basic SKB_DROP_REASON_TC_ERROR as a generic
fallback indicator to mark drop locations. Where needed, such locations can be
converted to more specific codes, for example, when hitting the reclassification
limit, etc.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Victor Nogueira <victor@mojatatu.com>
Link: https://lore.kernel.org/r/20231009092655.22025-2-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, the kfree_skb_reason() in sch_handle_{ingress,egress}() can only
express a basic SKB_DROP_REASON_TC_INGRESS or SKB_DROP_REASON_TC_EGRESS reason.
Victor kicked-off an initial proposal to make this more flexible by disambiguating
verdict from return code by moving the verdict into struct tcf_result and
letting tcf_classify() return a negative error. If hit, then two new drop
reasons were added in the proposal, that is SKB_DROP_REASON_TC_INGRESS_ERROR
as well as SKB_DROP_REASON_TC_EGRESS_ERROR. Further analysis of the actual
error codes would have required to attach to tcf_classify via kprobe/kretprobe
to more deeply debug skb and the returned error.
In order to make the kfree_skb_reason() in sch_handle_{ingress,egress}() more
extensible, it can be addressed in a more straight forward way, that is: Instead
of placing the verdict into struct tcf_result, we can just put the drop reason
in there, which does not require changes throughout various classful schedulers
given the existing verdict logic can stay as is.
Then, SKB_DROP_REASON_TC_ERROR{,_*} can be added to the enum skb_drop_reason
to disambiguate between an error or an intentional drop. New drop reason error
codes can be added successively to the tc code base.
For internal error locations which have not yet been annotated with a
SKB_DROP_REASON_TC_ERROR{,_*}, the fallback is SKB_DROP_REASON_TC_INGRESS and
SKB_DROP_REASON_TC_EGRESS, respectively. Generic errors could be marked with a
SKB_DROP_REASON_TC_ERROR code until they are converted to more specific ones
if it is found that they would be useful for troubleshooting.
While drop reasons have infrastructure for subsystem specific error codes which
are currently used by mac80211 and ovs, Jakub mentioned that it is preferred
for tc to use the enum skb_drop_reason core codes given it is a better fit and
currently the tooling support is better, too.
With regards to the latter:
[...] I think Alastair (bpftrace) is working on auto-prettifying enums when
bpftrace outputs maps. So we can do something like:
$ bpftrace -e 'tracepoint:skb:kfree_skb { @[args->reason] = count(); }'
Attaching 1 probe...
^C
@[SKB_DROP_REASON_TC_INGRESS]: 2
@[SKB_CONSUMED]: 34
^^^^^^^^^^^^ names!!
Auto-magically. [...]
Add a small helper tcf_set_drop_reason() which can be used to set the drop reason
into the tcf_result.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Victor Nogueira <victor@mojatatu.com>
Link: https://lore.kernel.org/netdev/20231006063233.74345d36@kernel.org
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20231009092655.22025-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We want to make the function more generic so that it can be used by
other UDP tunnel implementations such as geneve and vxlan. To do that,
add the following arguments:
- source and destination UDP port;
- ifindex of the output interface, needed by vxlan;
- the tos, because in some cases it is not taken from struct
ip_tunnel_info (for example, when it's inherited from the inner
packet);
- the dst cache, because not all tunnel types (e.g. vxlan) want to
use the one from struct ip_tunnel_info.
With these parameters, the function no longer needs the full struct
ip_tunnel_info as argument and we can pass only the relevant part of
it (struct ip_tunnel_key).
Suggested-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The function is now UDP-specific, the protocol is always IPPROTO_UDP.
Suggested-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
At the moment ip_route_output_tunnel() is used only by bareudp.
Ideally, other UDP tunnel implementations should use it, but to do so
the function needs to accept new parameters that are specific for UDP
tunnels, such as the ports.
Prepare for these changes by renaming the function to
udp_tunnel_dst_lookup() and move it to file
net/ipv4/udp_tunnel_core.c.
Suggested-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On systems with multiple timestamp event channels, some readers might
want to receive only a subset of those channels.
Add the necessary modifications to support timestamp event channel
filtering, including two IOCTL operations:
- Clear all channels
- Enable one channel
The mask modification operations will be applied exclusively on the
event queue assigned to the file descriptor used on the IOCTL operation,
so the typical procedure to have a reader receiving only a subset of the
enabled channels would be:
- Open device file
- ioctl: clear all channels
- ioctl: enable one channel
- start reading
Calling the enable one channel ioctl more than once will result in
multiple enabled channels.
Signed-off-by: Xabier Marquiegui <reibax@gmail.com>
Suggested-by: Richard Cochran <richardcochran@gmail.com>
Suggested-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add the necessary structure to support custom private-data per
posix-clock user.
The previous implementation of posix-clock assumed all file open
instances need access to the same clock structure on private_data.
The need for individual data structures per file open instance has been
identified when developing support for multiple timestamp event queue
users for ptp_clock.
Signed-off-by: Xabier Marquiegui <reibax@gmail.com>
Suggested-by: Richard Cochran <richardcochran@gmail.com>
Suggested-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add callback ops for pin-dpll phase measurement.
Add callback for pin signal phase adjustment.
Add min and max phase adjustment values to pin proprties.
Invoke callbacks in dpll_netlink.c when filling the pin details to
provide user with phase related attribute values.
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add attributes for providing the user with:
- measurement of signals phase offset between pin and dpll
- ability to adjust the phase of pin signal
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This feature totally depends on transport, so if transport doesn't
support it, return error.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This adds handling of MSG_ERRQUEUE input flag in receive call. This flag
is used to read socket's error queue instead of data queue. Possible
scenario of error queue usage is receiving completions for transmission
with MSG_ZEROCOPY flag. This patch also adds new defines: 'SOL_VSOCK'
and 'VSOCK_RECVERR'.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Check cpu_mitigations_off() first to avoid calling capable() if it is off.
This can avoid unnecessary audit log.
Fixes: bc5bc309db45 ("bpf: Inherit system settings for CPU security mitigations")
Suggested-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/CAEf4Bza6UVUWqcWQ-66weZ-nMDr+TFU3Mtq=dumZFD-pSqU7Ow@mail.gmail.com/
Link: https://lore.kernel.org/bpf/20231013083916.4199-1-laoar.shao@gmail.com
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Leon Romanovsky says:
====================
This PR is collected from
https://lore.kernel.org/all/cover.1695296682.git.leon@kernel.org
This series from Patrisious extends mlx5 to support IPsec packet offload
in multiport devices (MPV, see [1] for more details).
These devices have single flow steering logic and two netdev interfaces,
which require extra logic to manage IPsec configurations as they performed
on netdevs.
[1] https://lore.kernel.org/linux-rdma/20180104152544.28919-1-leon@kernel.org/
* 'mlx5-next' of https://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Handle IPsec steering upon master unbind/bind
net/mlx5: Configure IPsec steering for ingress RoCEv2 MPV traffic
net/mlx5: Configure IPsec steering for egress RoCEv2 MPV traffic
net/mlx5: Add create alias flow table function to ipsec roce
net/mlx5: Implement alias object allow and create functions
net/mlx5: Add alias flow table bits
net/mlx5: Store devcom pointer inside IPsec RoCE
net/mlx5: Register mlx5e priv to devcom in MPV mode
RDMA/mlx5: Send events from IB driver about device affiliation state
net/mlx5: Introduce ifc bits for migration in a chunk mode
====================
Link: https://lore.kernel.org/r/20231002083832.19746-1-leon@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
driver_state is a flex array, but is always allocated by the tls core
to a fixed size (TLS_DRIVER_STATE_SIZE_{TX,RX}). Simplify the code by
making that size explicit so that sizeof(struct
tls_offload_context_{tx,rx}) works.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
TLS_MAX_IV_SIZE + TLS_MAX_SALT_SIZE is 20B, we don't get much benefit
in cipher_context's size and can simplify the init code a bit.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It's defined in include/net/tls.h, avoid using an overly generic name.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
TLS_MAX_REC_SEQ_SIZE is 8B, we don't get anything by using kmalloc.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The merge commit 92716869375b ("Merge branch 'br-flush-filtering'")
added support for FDB flushing in bridge driver. The following patches
will extend VXLAN driver to support FDB flushing as well. The netlink
message for bulk delete is shared between the drivers. With the existing
implementation, there is no way to prevent user from flushing with
attributes that are not supported per driver. For example, when VNI will
be added, user will not get an error for flush FDB entries in bridge
with VNI, although this attribute is not relevant for bridge.
As preparation for support of FDB flush in VXLAN driver, move the policy
to be handled in bridge driver, later a new policy for VXLAN will be
added in VXLAN driver. Do not pass 'vid' as part of ndo_fdb_del_bulk(),
as this field is relevant only for bridge.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
kernel/bpf/verifier.c
829955981c55 ("bpf: Fix verifier log for async callback return values")
a923819fb2c5 ("bpf: Treat first argument as return value for bpf_throw")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from CAN and BPF.
We have a regression in TC currently under investigation, otherwise
the things that stand off most are probably the TCP and AF_PACKET
fixes, with both issues coming from 6.5.
Previous releases - regressions:
- af_packet: fix fortified memcpy() without flex array.
- tcp: fix crashes trying to free half-baked MTU probes
- xdp: fix zero-size allocation warning in xskq_create()
- can: sja1000: always restart the tx queue after an overrun
- eth: mlx5e: again mutually exclude RX-FCS and RX-port-timestamp
- eth: nfp: avoid rmmod nfp crash issues
- eth: octeontx2-pf: fix page pool frag allocation warning
Previous releases - always broken:
- mctp: perform route lookups under a RCU read-side lock
- bpf: s390: fix clobbering the caller's backchain in the trampoline
- phy: lynx-28g: cancel the CDR check work item on the remove path
- dsa: qca8k: fix qca8k driver for Turris 1.x
- eth: ravb: fix use-after-free issue in ravb_tx_timeout_work()
- eth: ixgbe: fix crash with empty VF macvlan list"
* tag 'net-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (54 commits)
rswitch: Fix imbalance phy_power_off() calling
rswitch: Fix renesas_eth_sw_remove() implementation
octeontx2-pf: Fix page pool frag allocation warning
nfc: nci: assert requested protocol is valid
af_packet: Fix fortified memcpy() without flex array.
net: tcp: fix crashes trying to free half-baked MTU probes
net/smc: Fix pos miscalculation in statistics
nfp: flower: avoid rmmod nfp crash issues
net: usb: dm9601: fix uninitialized variable use in dm9601_mdio_read
ethtool: Fix mod state of verbose no_mask bitset
net: nfc: fix races in nfc_llcp_sock_get() and nfc_llcp_sock_get_sn()
mctp: perform route lookups under a RCU read-side lock
net: skbuff: fix kernel-doc typos
s390/bpf: Fix unwinding past the trampoline
s390/bpf: Fix clobbering the caller's backchain in the trampoline
net/mlx5e: Again mutually exclude RX-FCS and RX-port-timestamp
net/smc: Fix dependency of SMC on ISM
ixgbe: fix crash with empty VF macvlan list
net/mlx5e: macsec: use update_pn flag instead of PN comparation
net: phy: mscc: macsec: reject PN update requests
...
|
|
Sergei Trofimovich reported a regression [0] caused by commit a0ade8404c3b
("af_packet: Fix warning of fortified memcpy() in packet_getname().").
It introduced a flex array sll_addr_flex in struct sockaddr_ll as a
union-ed member with sll_addr to work around the fortified memcpy() check.
However, a userspace program uses a struct that has struct sockaddr_ll in
the middle, where a flex array is illegal to exist.
include/linux/if_packet.h:24:17: error: flexible array member 'sockaddr_ll::<unnamed union>::<unnamed struct>::sll_addr_flex' not at end of 'struct packet_info_t'
24 | __DECLARE_FLEX_ARRAY(unsigned char, sll_addr_flex);
| ^~~~~~~~~~~~~~~~~~~~
To fix the regression, let's go back to the first attempt [1] telling
memcpy() the actual size of the array.
Reported-by: Sergei Trofimovich <slyich@gmail.com>
Closes: https://github.com/NixOS/nixpkgs/pull/252587#issuecomment-1741733002 [0]
Link: https://lore.kernel.org/netdev/20230720004410.87588-3-kuniyu@amazon.com/ [1]
Fixes: a0ade8404c3b ("af_packet: Fix warning of fortified memcpy() in packet_getname().")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20231009153151.75688-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Florian Westphal says:
====================
netfilter updates for next
First 5 patches, from Phil Sutter, clean up nftables dumpers to
use the context buffer in the netlink_callback structure rather
than a kmalloc'd buffer.
Patch 6, from myself, zaps dead code and replaces the helper function
with a small inlined helper.
Patch 7, also from myself, removes another pr_debug and replaces it
with the existing nf_log-based debug helpers.
Last patch, from George Guo, gets nft_table comments back in
sync with the structure members.
* tag 'nf-next-23-10-10' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: cleanup struct nft_table
netfilter: conntrack: prefer tcp_error_log to pr_debug
netfilter: conntrack: simplify nf_conntrack_alter_reply
netfilter: nf_tables: Don't allocate nft_rule_dump_ctx
netfilter: nf_tables: Carry s_idx in nft_rule_dump_ctx
netfilter: nf_tables: Carry reset flag in nft_rule_dump_ctx
netfilter: nf_tables: Drop pointless memset when dumping rules
netfilter: nf_tables: Always allocate nft_rule_dump_ctx
====================
Link: https://lore.kernel.org/r/20231010145343.12551-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that napi_schedule return a bool, we can drop napi_reschedule that
does the same exact function. The function comes from a very old commit
bfe13f54f502 ("ibm_emac: Convert to use napi_struct independent of struct
net_device") and the purpose is actually deprecated in favour of
different logic.
Convert every user of napi_reschedule to napi_schedule.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> # ath10k
Acked-by: Nick Child <nnac123@linux.ibm.com> # ibm
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for can/dev/rx-offload.c
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20231009133754.9834-3-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Change napi_schedule to return a bool on NAPI successful schedule.
This might be useful for some driver to do additional steps after a
NAPI has been scheduled.
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231009133754.9834-2-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
These hooks allows intercepting connect(), getsockname(),
getpeername(), sendmsg() and recvmsg() for unix sockets. The unix
socket hooks get write access to the address length because the
address length is not fixed when dealing with unix sockets and
needs to be modified when a unix socket address is modified by
the hook. Because abstract socket unix addresses start with a
NUL byte, we cannot recalculate the socket address in kernelspace
after running the hook by calculating the length of the unix socket
path using strlen().
These hooks can be used when users want to multiplex syscall to a
single unix socket to multiple different processes behind the scenes
by redirecting the connect() and other syscalls to process specific
sockets.
We do not implement support for intercepting bind() because when
using bind() with unix sockets with a pathname address, this creates
an inode in the filesystem which must be cleaned up. If we rewrite
the address, the user might try to clean up the wrong file, leaking
the socket in the filesystem where it is never cleaned up. Until we
figure out a solution for this (and a use case for intercepting bind()),
we opt to not allow rewriting the sockaddr in bind() calls.
We also implement recvmsg() support for connected streams so that
after a connect() that is modified by a sockaddr hook, any corresponding
recmvsg() on the connected socket can also be modified to make the
connected program think it is connected to the "intended" remote.
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Daan De Meyer <daan.j.demeyer@gmail.com>
Link: https://lore.kernel.org/r/20231011185113.140426-5-daan.j.demeyer@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
As prep for adding unix socket support to the cgroup sockaddr hooks,
let's propagate the sockaddr length back to the caller after running
a bpf cgroup sockaddr hook program. While not important for AF_INET or
AF_INET6, the sockaddr length is important when working with AF_UNIX
sockaddrs as the size of the sockaddr cannot be determined just from the
address family or the sockaddr's contents.
__cgroup_bpf_run_filter_sock_addr() is modified to take the uaddrlen as
an input/output argument. After running the program, the modified sockaddr
length is stored in the uaddrlen pointer.
Signed-off-by: Daan De Meyer <daan.j.demeyer@gmail.com>
Link: https://lore.kernel.org/r/20231011185113.140426-3-daan.j.demeyer@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull quota regression fix from Jan Kara.
* tag 'fs_for_v6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
quota: Fix slow quotaoff
|
|
Although there is a kfree_skb_reason() helper function that can be used to
find the reason why this skb is dropped, but most callers didn't increase
one of rx_dropped, tx_dropped, rx_nohandler and rx_otherhost_dropped.
For the users, people are more concerned about why the dropped in ip
is increasing.
Introduce netdev_core_stats_inc() for trace the caller of
dev_core_stats_*_inc().
Also, add __code to netdev_core_stats_alloc(), as it's called with small
probability. And add noinline make sure netdev_core_stats_inc was never
inlined.
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Suggested-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Correct punctuation and drop an extraneous word.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231008214121.25940-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- fixes for Hyper-V VTL code (Saurabh Sengar and Olaf Hering)
- fix hv_kvp_daemon to support keyfile based connection profile
(Shradha Gupta)
* tag 'hyperv-fixes-signed-20231009' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
hv/hv_kvp_daemon:Support for keyfile based connection profile
hyperv: reduce size of ms_hyperv_info
x86/hyperv: Add common print prefix "Hyper-V" in hv_init
x86/hyperv: Remove hv_vtl_early_init initcall
x86/hyperv: Restrict get_vtl to only VTL platforms
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of pending fixes since a couple of weeks ago, which
became slightly bigger than usual due to my vacation.
Most of changes are about ASoC device-specific fixes while USB- and
HD-audio received quirks as usual. All fixes, including two ASoC core
changes, are reasonably small and safe to apply"
* tag 'sound-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits)
ALSA: usb-audio: Fix microphone sound on Nexigo webcam.
ALSA: hda/realtek: Change model for Intel RVP board
ALSA: usb-audio: Fix microphone sound on Opencomm2 Headset
ALSA: hda: cs35l41: Cleanup and fix double free in firmware request
ASoC: dt-bindings: fsl,micfil: Document #sound-dai-cells
ASoC: amd: yc: Fix non-functional mic on Lenovo 82YM
ASoC: tlv320adc3xxx: BUG: Correct micbias setting
ASoC: rt5682: Fix regulator enable/disable sequence
ASoC: hdmi-codec: Fix broken channel map reporting
ASoC: core: Do not call link_exit() on uninitialized rtd objects
ASoC: core: Print component name when printing log
ASoC: SOF: amd: fix for firmware reload failure after playback
ASoC: fsl-asoc-card: use integer type for fll_id and pll_id
ASoC: fsl_sai: Don't disable bitclock for i.MX8MP
dt-bindings: ASoC: rockchip: Add compatible for RK3128 spdif
ASoC: soc-generic-dmaengine-pcm: Fix function name in comment
ALSA: hda/realtek - ALC287 merge RTK codec with CS CS35L41 AMP
ASoC: simple-card: fixup asoc_simple_probe() error handling
ASoC: simple-card-utils: fixup simple_util_startup() error handling
ASoC: Intel: sof_sdw: add support for SKU 0B14
...
|
|
Add comments for nlpid, family, udlen and udata in struct nft_table, and
afinfo is no longer a member of struct nft_table, so remove the comment
for it.
Signed-off-by: George Guo <guodongtai@kylinos.cn>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
nf_conntrack_alter_reply doesn't do helper reassignment anymore.
Remove the comments that make this claim.
Furthermore, remove dead code from the function and place ot
in nf_conntrack.h.
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Indicate next PN update using update_pn flag in macsec_context.
Offloaded MACsec implementations does not know whether or not the
MACSEC_SA_ATTR_PN attribute was passed for an SA update and assume
that next PN should always updated, but this is not always true.
The PN can be reset to its initial value using the following command:
$ ip macsec set macsec0 tx sa 0 off #octeontx2-pf case
Or, the update PN command will succeed even if the driver does not support
PN updates.
$ ip macsec set macsec0 tx sa 0 pn 1 on #mscc phy driver case
Comparing the initial PN with the new PN value is not a solution. When
the user updates the PN using its initial value the command will
succeed, even if the driver does not support it. Like this:
$ ip macsec add macsec0 tx sa 0 pn 1 on key 00 \
ead3664f508eb06c40ac7104cdae4ce5
$ ip macsec set macsec0 tx sa 0 pn 1 on #mlx5 case
Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In order to better estimate whether a data packet has been
retransmitted or is the result of a TLP, we save the last received
ipv6 flowlabel.
To make space for this field we resize the "ato" field in
inet_connection_sock as the current value of TCP_DELACK_MAX can be
fully contained in 8 bits and add a compile_time_assert ensuring this
field is the required size.
v2: addressed kernel bot feedback about dccp_delack_timer()
v3: addressed build error introduced by commit bbf80d713fe7 ("tcp:
derive delack_max from rto_min")
Signed-off-by: David Morley <morleyd@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Tested-by: David Morley <morleyd@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Extend the bpf_fib_lookup() helper by making it to return the source
IPv4/IPv6 address if the BPF_FIB_LOOKUP_SRC flag is set.
For example, the following snippet can be used to derive the desired
source IP address:
struct bpf_fib_lookup p = { .ipv4_dst = ip4->daddr };
ret = bpf_skb_fib_lookup(skb, p, sizeof(p),
BPF_FIB_LOOKUP_SRC | BPF_FIB_LOOKUP_SKIP_NEIGH);
if (ret != BPF_FIB_LKUP_RET_SUCCESS)
return TC_ACT_SHOT;
/* the p.ipv4_src now contains the source address */
The inability to derive the proper source address may cause malfunctions
in BPF-based dataplanes for hosts containing netdevs with more than one
routable IP address or for multi-homed hosts.
For example, Cilium implements packet masquerading in BPF. If an
egressing netdev to which the Cilium's BPF prog is attached has
multiple IP addresses, then only one [hardcoded] IP address can be used for
masquerading. This breaks connectivity if any other IP address should have
been selected instead, for example, when a public and private addresses
are attached to the same egress interface.
The change was tested with Cilium [1].
Nikolay Aleksandrov helped to figure out the IPv6 addr selection.
[1]: https://github.com/cilium/cilium/pull/28283
Signed-off-by: Martynas Pumputis <m@lambda.lt>
Link: https://lore.kernel.org/r/20231007081415.33502-2-m@lambda.lt
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
BPF supports creating high resolution timers using bpf_timer_* helper
functions. Currently, only the BPF_F_TIMER_ABS flag is supported, which
specifies that the timeout should be interpreted as absolute time. It
would also be useful to be able to pin that timer to a core. For
example, if you wanted to make a subset of cores run without timer
interrupts, and only have the timer be invoked on a single core.
This patch adds support for this with a new BPF_F_TIMER_CPU_PIN flag.
When specified, the HRTIMER_MODE_PINNED flag is passed to
hrtimer_start(). A subsequent patch will update selftests to validate.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/bpf/20231004162339.200702-2-void@manifault.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.7
The first pull request for v6.7, with both stack and driver changes.
We have a big change how locking is handled in cfg80211 and mac80211
which removes several locks and hopefully simplifies the locking
overall. In drivers rtw89 got MCC support and smaller features to
other active drivers but nothing out of ordinary.
Major changes:
cfg80211
- remove wdev mutex, use the wiphy mutex instead
- annotate iftype_data pointer with sparse
- first kunit tests, for element defrag
- remove unused scan_width support
mac80211
- major locking rework, remove several locks like sta_mtx, key_mtx
etc. and use the wiphy mutex instead
- remove unused shifted rate support
- support antenna control in frame injection (requires driver support)
- convert RX_DROP_UNUSABLE to more detailed reason codes
rtw89
- TDMA-based multi-channel concurrency (MCC) support
iwlwifi
- support set_antenna() operation
- support frame injection antenna control
ath12k
- WCN7850: enable 320 MHz channels in 6 GHz band
- WCN7850: hardware rfkill support
- WCN7850: enable IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS to make scan faster
ath11k
- add chip id board name while searching board-2.bin
* tag 'wireless-next-2023-10-06' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (272 commits)
wifi: rtlwifi: remove unreachable code in rtl92d_dm_check_edca_turbo()
wifi: rtw89: debug: txpwr table supports Wi-Fi 7 chips
wifi: rtw89: debug: show txpwr table according to chip gen
wifi: rtw89: phy: set TX power RU limit according to chip gen
wifi: rtw89: phy: set TX power limit according to chip gen
wifi: rtw89: phy: set TX power offset according to chip gen
wifi: rtw89: phy: set TX power by rate according to chip gen
wifi: rtw89: mac: get TX power control register according to chip gen
wifi: rtlwifi: use unsigned long for rtl_bssid_entry timestamp
wifi: rtlwifi: fix EDCA limit set by BT coexistence
wifi: rt2x00: fix MT7620 low RSSI issue
wifi: rtw89: refine bandwidth 160MHz uplink OFDMA performance
wifi: rtw89: refine uplink trigger based control mechanism
wifi: rtw89: 8851b: update TX power tables to R34
wifi: rtw89: 8852b: update TX power tables to R35
wifi: rtw89: 8852c: update TX power tables to R67
wifi: rtw89: regd: configure Thailand in regulation type
wifi: mac80211: add back SPDX identifier
wifi: mac80211: fix ieee80211_drop_unencrypted_mgmt return type/value
wifi: rtlwifi: cleanup few rtlxxxx_set_hw_reg() routines
...
====================
Link: https://lore.kernel.org/r/87jzrz6bvw.fsf@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch adds the BCM5221 PHY support by reusing brcm_fet_*()
callbacks and adding quirks for BCM5221 when needed.
Cc: Jim Reinhart <jimr@tekvox.com>
Cc: James Autry <jautry@tekvox.com>
Cc: Matthew Maron <matthewm@tekvox.com>
Signed-off-by: Giulio Benetti <giulio.benetti+tekvox@benettiengineering.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20231005182915.153815-1-giulio.benetti@benettiengineering.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
i40e: House-keeping and clean-up
Ivan Vecera says:
The series makes some house-keeping tasks on i40e driver:
Patch 1: Removes unnecessary back pointer from i40e_hw
Patch 2: Moves I40E_MASK macro to i40e_register.h where is used
Patch 3: Refactors I40E_MDIO_CLAUSE* to use the common macro
Patch 4: Add header dependencies to <linux/avf/virtchnl.h>
Patch 5: Simplifies memory alloction functions
Patch 6: Moves mem alloc structures to i40e_alloc.h
Patch 7: Splits i40e_osdep.h to i40e_debug.h and i40e_io.h
Patch 8: Removes circular header deps, fixes and cleans headers
Patch 9: Moves DDP specific macros and structs to i40e_ddp.c
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
i40e: Move DDP specific macros and structures to i40e_ddp.c
i40e: Remove circular header dependencies and fix headers
i40e: Split i40e_osdep.h
i40e: Move memory allocation structures to i40e_alloc.h
i40e: Simplify memory allocation functions
virtchnl: Add header dependencies
i40e: Refactor I40E_MDIO_CLAUSE* macros
i40e: Move I40E_MASK macro to i40e_register.h
i40e: Remove back pointer from i40e_hw structure
====================
Link: https://lore.kernel.org/r/20231005162850.3218594-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2023-10-05
The first patch is by Miquel Raynal and fixes a comment in the sja1000
driver.
Vincent Mailhol contributes 2 patches that fix W=1 compiler warnings
in the etas_es58x driver.
Jiapeng Chong's patch removes an unneeded NULL pointer check before
dev_put() in the CAN raw protocol.
A patch by Justin Stittreplaces a strncpy() by strscpy() in the
peak_pci sja1000 driver.
The next 5 patches are by me and fix the can_restart() handler and
replace BUG_ON()s in the CAN dev helpers with proper error handling.
The last 27 patches are also by me and target the at91_can driver.
First a new helper function is introduced, the at91_can driver is
cleaned up and updated to use the rx-offload helper.
* tag 'linux-can-next-for-6.7-20231005' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (37 commits)
can: at91_can: switch to rx-offload implementation
can: at91_can: at91_alloc_can_err_skb() introduce new function
can: at91_can: at91_irq_err_line(): send error counters with state change
can: at91_can: at91_irq_err_line(): make use of can_change_state() and can_bus_off()
can: at91_can: at91_irq_err_line(): take reg_sr into account for bus off
can: at91_can: at91_irq_err_line(): make use of can_state_get_by_berr_counter()
can: at91_can: at91_irq_err(): rename to at91_irq_err_line()
can: at91_can: at91_irq_err_frame(): move next to at91_irq_err()
can: at91_can: at91_irq_err_frame(): call directly from IRQ handler
can: at91_can: at91_poll_err(): increase stats even if no quota left or OOM
can: at91_can: at91_poll_err(): fold in at91_poll_err_frame()
can: at91_can: add CAN transceiver support
can: at91_can: at91_open(): forward request_irq()'s return value in case or an error
can: at91_can: at91_chip_start(): don't disable IRQs twice
can: at91_can: at91_set_bittiming(): demote register output to debug level
can: at91_can: rename struct at91_priv::{tx_next,tx_echo} to {tx_head,tx_tail}
can: at91_can: at91_setup_mailboxes(): update comments
can: at91_can: add more register definitions
can: at91_can: MCR Register: convert to FIELD_PREP()
can: at91_can: MSR Register: convert to FIELD_PREP()
...
====================
Link: https://lore.kernel.org/r/20231005195812.549776-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, there exists a system-wide setting related to CPU security
mitigations, denoted as 'mitigations='. When set to 'mitigations=off', it
deactivates all optional CPU mitigations. Therefore, if we implement a
system-wide 'mitigations=off' setting, it should inherently bypass Spectre
v1 and Spectre v4 in the BPF subsystem.
Please note that there is also a more specific 'nospectre_v1' setting on
x86 and ppc architectures, though it is not currently exported. For the
time being, let's disregard more fine-grained options.
This idea emerged during our discussion about potential Spectre v1 attacks
with Luis [0].
[0] https://lore.kernel.org/bpf/b4fc15f7-b204-767e-ebb9-fdb4233961fb@iogearbox.net
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Song Liu <song@kernel.org>
Acked-by: KP Singh <kpsingh@kernel.org>
Cc: Luis Gerhorst <gerhorst@cs.fau.de>
Link: https://lore.kernel.org/bpf/20231005084123.1338-1-laoar.shao@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"A typo fix for a PMU driver, a workround for a side-channel erratum on
Cortex-A520 and a fix for the local timer save/restore when using ACPI
with Qualcomm's custom CPUs:
- Workaround for Cortex-A520 erratum #2966298
- Fix typo in Arm CMN PMU driver that breaks counter overflow handling
- Fix timer handling across idle for Qualcomm custom CPUs"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
cpuidle, ACPI: Evaluate LPI arch_flags for broadcast timer
arm64: errata: Add Cortex-A520 speculative unprivileged load workaround
arm64: Add Cortex-A520 CPU part definition
perf/arm-cmn: Fix the unhandled overflow status of counter 4 to 7
|