Age | Commit message (Collapse) | Author | Files | Lines |
|
We're spending a considerable amount of the sendmsg/recvmsg time just
copying in the message header. And for provided buffers, the known
single entry iovec.
Be a bit smarter about it and enable/disable user access around our
copying. In a test case that does both sendmsg and recvmsg, the
runtime before this change (averaged over multiple runs, very stable
times however):
Kernel Time Diff
====================================
-git 4720 usec
-git+commit 4311 usec -8.7%
and looking at a profile diff, we see the following:
0.25% +9.33% [kernel.kallsyms] [k] _copy_from_user
4.47% -3.32% [kernel.kallsyms] [k] __io_msg_copy_hdr.constprop.0
where we drop more than 9% of _copy_from_user() time, and consequently
add time to __io_msg_copy_hdr() where the copies are now attributed to,
but with a net win of 6%.
In comparison, the same test case with send/recv runs in 3745 usec, which
is (expectedly) still quite a bit faster. But at least sendmsg/recvmsg is
now only ~13% slower, where it was ~21% slower before.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move the actual user_msghdr / compat_msghdr into the send and receive
sides, respectively, so we can move the uaddr receive handling into its
own handler, and ditto the multishot with buffer selection logic.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
For recvmsg, we roll our own since we support buffer selections. This
isn't the case for sendmsg right now, but in preparation for doing so,
make the recvmsg copy helpers generic so we can call them from the
sendmsg side as well.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If we use IORING_OP_RECV with provided buffers and pass in '0' as the
length of the request, the length is retrieved from the selected buffer.
If MSG_WAITALL is also set and we get a short receive, then we may hit
the retry path which decrements sr->len and increments the buffer for
a retry. However, the length is still zero at this point, which means
that sr->len now becomes huge and import_ubuf() will cap it to
MAX_RW_COUNT and subsequently return -EFAULT for the range as a whole.
Fix this by always assigning sr->len once the buffer has been selected.
Cc: stable@vger.kernel.org
Fixes: 7ba89d2af17a ("io_uring: ensure recv and recvmsg handle MSG_WAITALL correctly")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If we have multiple clients and some/all are flooding the receives to
such an extent that we can retry a LOT handling multishot receives, then
we can be starving some clients and hence serving traffic in an
imbalanced fashion.
Limit multishot retry attempts to some arbitrary value, whose only
purpose serves to ensure that we don't keep serving a single connection
for way too long. We default to 32 retries, which should be more than
enough to provide fairness, yet not so small that we'll spend too much
time requeuing rather than handling traffic.
Cc: stable@vger.kernel.org
Depends-on: 704ea888d646 ("io_uring/poll: add requeue return code from poll multishot handling")
Depends-on: 1e5d765a82f ("io_uring/net: un-indent mshot retry path in io_recv_finish()")
Depends-on: e84b01a880f6 ("io_uring/poll: move poll execution helpers higher up")
Fixes: b3fdea6ecb55 ("io_uring: multishot recv")
Fixes: 9bb66906f23e ("io_uring: support multishot in recvmsg")
Link: https://github.com/axboe/liburing/issues/1043
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In preparation for putting some retry logic in there, have the done
path just skip straight to the end rather than have too much nesting
in here.
No functional changes in this patch.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
io_uring does non-blocking connection attempts, which can yield some
unexpected results if a connect request is re-attempted by an an
application. This is equivalent to the following sync syscall sequence:
sock = socket(AF_INET, SOCK_STREAM | SOCK_NONBLOCK, IPPROTO_TCP);
connect(sock, &addr, sizeof(addr);
ret == -1 and errno == EINPROGRESS expected here. Now poll for POLLOUT
on sock, and when that returns, we expect the socket to be connected.
But if we follow that procedure with:
connect(sock, &addr, sizeof(addr));
you'd expect ret == -1 and errno == EISCONN here, but you actually get
ret == 0. If we attempt the connection one more time, then we get EISCON
as expected.
io_uring used to do this, but turns out that bluetooth fails with EBADFD
if you attempt to re-connect. Also looks like EISCONN _could_ occur with
this sequence.
Retain the ->in_progress logic, but work-around a potential EISCONN or
EBADFD error and only in those cases look at the sock_error(). This
should work in general and avoid the odd sequence of a repeated connect
request returning success when the socket is already connected.
This is all a side effect of the socket state being in a CONNECTING
state when we get EINPROGRESS, and only a re-connect or other related
operation will turn that into CONNECTED.
Cc: stable@vger.kernel.org
Fixes: 3fb1bd688172 ("io_uring/net: handle -EINPROGRESS correct for IORING_OP_CONNECT")
Link: https://github.com/axboe/liburing/issues/980
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When using selected buffer feature, io_uring delays data iter setup
until later. If io_setup_async_msg() is called before that it might see
not correctly setup iterator. Pre-init nr_segs and judge from its state
whether we repointing.
Cc: stable@vger.kernel.org
Reported-by: syzbot+a4c6e5ef999b68b26ed1@syzkaller.appspotmail.com
Fixes: 0455d4ccec548 ("io_uring: add POLL_FIRST support for send/sendmsg and recv/recvmsg")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/0000000000002770be06053c7757@google.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Now all callers of io_aux_cqe() set allow_overflow to false, remove the
parameter and not allow overflowing auxilary multishot cqes.
When CQ is full the function callers and all multishot requests in
general are expected to complete the request. That prevents indefinite
in-background grows of the overflow list and let's the userspace to
handle the backlog at its own pace.
Resubmitting a request should also be faster than accounting a bunch of
overflows, so it should be better for perf when it happens, but a well
behaving userspace should be trying to avoid overflows in any case.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/bb20d14d708ea174721e58bb53786b0521e4dd6d.1691757663.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Don't allow overflowing multishot recv CQEs, it might get out of
hand, hurt performance, and in the worst case scenario OOM the task.
Cc: stable@vger.kernel.org
Fixes: b3fdea6ecb55c ("io_uring: multishot recv")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/0b295634e8f1b71aa764c984608c22d85f88f75c.1691757663.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Don't allow overflowing multishot accept CQEs, we want to limit
the grows of the overflow list.
Cc: stable@vger.kernel.org
Fixes: 4e86a2c980137 ("io_uring: implement multishot mode for accept")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/7d0d749649244873772623dd7747966f516fe6e2.1691757663.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull io_uring fixes from Jens Axboe:
"The fix for the msghdr->msg_inq assigned value being wrong, using -1
instead of -1U for the signed type.
Also a fix for ensuring when we're trying to run task_work on an
exiting task, that we wait for it. This is not really a correctness
thing as the work is being canceled, but it does help with ensuring
file descriptors are closed when the task has exited."
* tag 'io_uring-6.5-2023-07-03' of git://git.kernel.dk/linux:
io_uring: flush offloaded and delayed task_work on exit
io_uring: remove io_fallback_tw() forward declaration
io_uring/net: use proper value for msg_inq
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking changes from Jakub Kicinski:
"WiFi 7 and sendpage changes are the biggest pieces of work for this
release. The latter will definitely require fixes but I think that we
got it to a reasonable point.
Core:
- Rework the sendpage & splice implementations
Instead of feeding data into sockets page by page extend sendmsg
handlers to support taking a reference on the data, controlled by a
new flag called MSG_SPLICE_PAGES
Rework the handling of unexpected-end-of-file to invoke an
additional callback instead of trying to predict what the right
combination of MORE/NOTLAST flags is
Remove the MSG_SENDPAGE_NOTLAST flag completely
- Implement SCM_PIDFD, a new type of CMSG type analogous to
SCM_CREDENTIALS, but it contains pidfd instead of plain pid
- Enable socket busy polling with CONFIG_RT
- Improve reliability and efficiency of reporting for ref_tracker
- Auto-generate a user space C library for various Netlink families
Protocols:
- Allow TCP to shrink the advertised window when necessary, prevent
sk_rcvbuf auto-tuning from growing the window all the way up to
tcp_rmem[2]
- Use per-VMA locking for "page-flipping" TCP receive zerocopy
- Prepare TCP for device-to-device data transfers, by making sure
that payloads are always attached to skbs as page frags
- Make the backoff time for the first N TCP SYN retransmissions
linear. Exponential backoff is unnecessarily conservative
- Create a new MPTCP getsockopt to retrieve all info
(MPTCP_FULL_INFO)
- Avoid waking up applications using TLS sockets until we have a full
record
- Allow using kernel memory for protocol ioctl callbacks, paving the
way to issuing ioctls over io_uring
- Add nolocalbypass option to VxLAN, forcing packets to be fully
encapsulated even if they are destined for a local IP address
- Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure
in-kernel ECMP implementation (e.g. Open vSwitch) select the same
link for all packets. Support L4 symmetric hashing in Open vSwitch
- PPPoE: make number of hash bits configurable
- Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client
(ipconfig)
- Add layer 2 miss indication and filtering, allowing higher layers
(e.g. ACL filters) to make forwarding decisions based on whether
packet matched forwarding state in lower devices (bridge)
- Support matching on Connectivity Fault Management (CFM) packets
- Hide the "link becomes ready" IPv6 messages by demoting their
printk level to debug
- HSR: don't enable promiscuous mode if device offloads the proto
- Support active scanning in IEEE 802.15.4
- Continue work on Multi-Link Operation for WiFi 7
BPF:
- Add precision propagation for subprogs and callbacks. This allows
maintaining verification efficiency when subprograms are used, or
in fact passing the verifier at all for complex programs,
especially those using open-coded iterators
- Improve BPF's {g,s}setsockopt() length handling. Previously BPF
assumed the length is always equal to the amount of written data.
But some protos allow passing a NULL buffer to discover what the
output buffer *should* be, without writing anything
- Accept dynptr memory as memory arguments passed to helpers
- Add routing table ID to bpf_fib_lookup BPF helper
- Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands
- Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark
maps as read-only)
- Show target_{obj,btf}_id in tracing link fdinfo
- Addition of several new kfuncs (most of the names are
self-explanatory):
- Add a set of new dynptr kfuncs: bpf_dynptr_adjust(),
bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size()
and bpf_dynptr_clone().
- bpf_task_under_cgroup()
- bpf_sock_destroy() - force closing sockets
- bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs
Netfilter:
- Relax set/map validation checks in nf_tables. Allow checking
presence of an entry in a map without using the value
- Increase ip_vs_conn_tab_bits range for 64BIT builds
- Allow updating size of a set
- Improve NAT tuple selection when connection is closing
Driver API:
- Integrate netdev with LED subsystem, to allow configuring HW
"offloaded" blinking of LEDs based on link state and activity
(i.e. packets coming in and out)
- Support configuring rate selection pins of SFP modules
- Factor Clause 73 auto-negotiation code out of the drivers, provide
common helper routines
- Add more fool-proof helpers for managing lifetime of MDIO devices
associated with the PCS layer
- Allow drivers to report advanced statistics related to Time Aware
scheduler offload (taprio)
- Allow opting out of VF statistics in link dump, to allow more VFs
to fit into the message
- Split devlink instance and devlink port operations
New hardware / drivers:
- Ethernet:
- Synopsys EMAC4 IP support (stmmac)
- Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches
- Marvell 88E6250 7 port switches
- Microchip LAN8650/1 Rev.B0 PHYs
- MediaTek MT7981/MT7988 built-in 1GE PHY driver
- WiFi:
- Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps
- Realtek RTL8723DS (SDIO variant)
- Realtek RTL8851BE
- CAN:
- Fintek F81604
Drivers:
- Ethernet NICs:
- Intel (100G, ice):
- support dynamic interrupt allocation
- use meta data match instead of VF MAC addr on slow-path
- nVidia/Mellanox:
- extend link aggregation to handle 4, rather than just 2 ports
- spawn sub-functions without any features by default
- OcteonTX2:
- support HTB (Tx scheduling/QoS) offload
- make RSS hash generation configurable
- support selecting Rx queue using TC filters
- Wangxun (ngbe/txgbe):
- add basic Tx/Rx packet offloads
- add phylink support (SFP/PCS control)
- Freescale/NXP (enetc):
- report TAPRIO packet statistics
- Solarflare/AMD:
- support matching on IP ToS and UDP source port of outer
header
- VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6
- add devlink dev info support for EF10
- Virtual NICs:
- Microsoft vNIC:
- size the Rx indirection table based on requested
configuration
- support VLAN tagging
- Amazon vNIC:
- try to reuse Rx buffers if not fully consumed, useful for ARM
servers running with 16kB pages
- Google vNIC:
- support TCP segmentation of >64kB frames
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- enable USXGMII (88E6191X)
- Microchip:
- lan966x: add support for Egress Stage 0 ACL engine
- lan966x: support mapping packet priority to internal switch
priority (based on PCP or DSCP)
- Ethernet PHYs:
- Broadcom PHYs:
- support for Wake-on-LAN for BCM54210E/B50212E
- report LPI counter
- Microsemi PHYs: support RGMII delay configuration (VSC85xx)
- Micrel PHYs: receive timestamp in the frame (LAN8841)
- Realtek PHYs: support optional external PHY clock
- Altera TSE PCS: merge the driver into Lynx PCS which it is a
variant of
- CAN: Kvaser PCIEcan:
- support packet timestamping
- WiFi:
- Intel (iwlwifi):
- major update for new firmware and Multi-Link Operation (MLO)
- configuration rework to drop test devices and split the
different families
- support for segmented PNVM images and power tables
- new vendor entries for PPAG (platform antenna gain) feature
- Qualcomm 802.11ax (ath11k):
- Multiple Basic Service Set Identifier (MBSSID) and Enhanced
MBSSID Advertisement (EMA) support in AP mode
- support factory test mode
- RealTek (rtw89):
- add RSSI based antenna diversity
- support U-NII-4 channels on 5 GHz band
- RealTek (rtl8xxxu):
- AP mode support for 8188f
- support USB RX aggregation for the newer chips"
* tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1602 commits)
net: scm: introduce and use scm_recv_unix helper
af_unix: Skip SCM_PIDFD if scm->pid is NULL.
net: lan743x: Simplify comparison
netlink: Add __sock_i_ino() for __netlink_diag_dump().
net: dsa: avoid suspicious RCU usage for synced VLAN-aware MAC addresses
Revert "af_unix: Call scm_recv() only after scm_set_cred()."
phylink: ReST-ify the phylink_pcs_neg_mode() kdoc
libceph: Partially revert changes to support MSG_SPLICE_PAGES
net: phy: mscc: fix packet loss due to RGMII delays
net: mana: use vmalloc_array and vcalloc
net: enetc: use vmalloc_array and vcalloc
ionic: use vmalloc_array and vcalloc
pds_core: use vmalloc_array and vcalloc
gve: use vmalloc_array and vcalloc
octeon_ep: use vmalloc_array and vcalloc
net: usb: qmi_wwan: add u-blox 0x1312 composition
perf trace: fix MSG_SPLICE_PAGES build error
ipvlan: Fix return value of ipvlan_queue_xmit()
netfilter: nf_tables: fix underflow in chain reference counter
netfilter: nf_tables: unbind non-anonymous set if rule construction fails
...
|
|
struct msghdr->msg_inq is a signed type, yet we attempt to store what
is essentially an unsigned bitmask in there. We only really need to know
if the field was stored or not, but let's use the proper type to avoid
any misunderstandings on what is being attempted here.
Link: https://lore.kernel.org/io-uring/CAHk-=wjKb24aSe6fE4zDH-eh8hr-FB9BbukObUVSMGOrsBHCRQ@mail.gmail.com/
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull io_uring updates from Jens Axboe:
"Nothing major in this release, just a bunch of cleanups and some
optimizations around networking mostly.
- clean up file request flags handling (Christoph)
- clean up request freeing and CQ locking (Pavel)
- support for using pre-registering the io_uring fd at setup time
(Josh)
- Add support for user allocated ring memory, rather than having the
kernel allocate it. Mostly for packing rings into a huge page (me)
- avoid an unnecessary double retry on receive (me)
- maintain ordering for task_work, which also improves performance
(me)
- misc cleanups/fixes (Pavel, me)"
* tag 'for-6.5/io_uring-2023-06-23' of git://git.kernel.dk/linux: (39 commits)
io_uring: merge conditional unlock flush helpers
io_uring: make io_cq_unlock_post static
io_uring: inline __io_cq_unlock
io_uring: fix acquire/release annotations
io_uring: kill io_cq_unlock()
io_uring: remove IOU_F_TWQ_FORCE_NORMAL
io_uring: don't batch task put on reqs free
io_uring: move io_clean_op()
io_uring: inline io_dismantle_req()
io_uring: remove io_free_req_tw
io_uring: open code io_put_req_find_next
io_uring: add helpers to decode the fixed file file_ptr
io_uring: use io_file_from_index in io_msg_grab_file
io_uring: use io_file_from_index in __io_sync_cancel
io_uring: return REQ_F_ flags from io_file_get_flags
io_uring: remove io_req_ffs_set
io_uring: remove a confusing comment above io_file_get_flags
io_uring: remove the mode variable in io_file_get_flags
io_uring: remove __io_file_supports_nowait
io_uring: wait interruptibly for request completions on exit
...
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
tools/testing/selftests/net/fcnal-test.sh
d7a2fc1437f7 ("selftests: net: fcnal-test: check if FIPS mode is enabled")
dd017c72dde6 ("selftests: fcnal: Test SO_DONTROUTE on TCP sockets.")
https://lore.kernel.org/all/5007b52c-dd16-dbf6-8d64-b9701bfa498b@tessares.net/
https://lore.kernel.org/all/20230619105427.4a0df9b3@canb.auug.org.au/
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rather than assign the user pointer to msghdr->msg_control, assign it
to msghdr->msg_control_user to make sparse happy. They are in a union
so the end result is the same, but let's avoid new sparse warnings and
squash this one.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202306210654.mDMcyMuB-lkp@intel.com/
Fixes: cac9e4418f4c ("io_uring/net: save msghdr->msg_control for retries")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We cannot sanely handle partial retries for recvmsg if we have cmsg
attached. If we don't, then we'd just be overwriting the initial cmsg
header on retries. Alternatively we could increment and handle this
appropriately, but it doesn't seem worth the complication.
Move the MSG_WAITALL check into the non-multishot case while at it,
since MSG_WAITALL is explicitly disabled for multishot anyway.
Link: https://lore.kernel.org/io-uring/0b0d4411-c8fd-4272-770b-e030af6919a0@kernel.dk/
Cc: stable@vger.kernel.org # 5.10+
Reported-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If we have cmsg attached AND we transferred partial data at least, clear
msg_controllen on retry so we don't attempt to send that again.
Cc: stable@vger.kernel.org # 5.10+
Fixes: cac9e4418f4c ("io_uring/net: save msghdr->msg_control for retries")
Reported-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If the application sets ->msg_control and we have to later retry this
command, or if it got queued with IOSQE_ASYNC to begin with, then we
need to retain the original msg_control value. This is due to the net
stack overwriting this field with an in-kernel pointer, to copy it
in. Hitting that path for the second time will now fail the copy from
user, as it's attempting to copy from a non-user address.
Cc: stable@vger.kernel.org # 5.10+
Link: https://github.com/axboe/liburing/issues/880
Reported-and-tested-by: Marek Majkowski <marek@cloudflare.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Everybody is passing in the request, so get rid of the io_ring_ctx and
explicit user_data pass-in. Both the ctx and user_data can be deduced
from the request at hand.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Declare MSG_SPLICE_PAGES, an internal sendmsg() flag, that hints to a
network protocol that it should splice pages from the source iterator
rather than copying the data if it can. This flag is added to a list that
is cleared by sendmsg syscalls on entry.
This is intended as a replacement for the ->sendpage() op, allowing a way
to splice in several multipage folios in one go.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If we're doing multishot receives, then we always end up doing two trips
through sock_recvmsg(). For protocols that sanely set msghdr->msg_inq,
then we don't need to waste time picking a new buffer and attempting a
new receive if there's nothing there.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Rather than have this logic in both io_recv() and io_recvmsg_multishot(),
push it into the handler they both call when finishing a receive
operation.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We can't currently tell if ->msg_inq was set when we ask for msg_get_inq,
initialize it to -1U so we can tell apart if it was set and there's
no data left, or if it just wasn't set at all by the protocol.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We only need to clear the input fields on the first invocation, not
when potentially doing a retry.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This returns a pointer to the current iovec entry in the iterator. Only
useful with ITER_IOVEC right now, but it prepares us to treat ITER_UBUF
and ITER_IOVEC identically for the first segment.
Rename struct iov_iter->iov to iov_iter->__iov to find any potentially
troublesome spots, and also to prevent anyone from adding new code that
accesses iter->iov directly.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Since io_uring does nonblocking connect requests, if we do two repeated
ones without having a listener, the second will get -ECONNABORTED rather
than the expected -ECONNREFUSED. Treat -ECONNABORTED like a normal retry
condition if we're nonblocking, if we haven't already seen it.
Cc: stable@vger.kernel.org
Fixes: 3fb1bd688172 ("io_uring/net: handle -EINPROGRESS correct for IORING_OP_CONNECT")
Link: https://github.com/axboe/liburing/issues/828
Reported-by: Hui, Chunyang <sanqian.hcy@antgroup.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
MSG_NOSIGNAL is not applicable for the receiving side, SIGPIPE is
generated when trying to write to a "broken pipe". AF_PACKET's
packet_recvmsg() does enforce this, giving back EINVAL when MSG_NOSIGNAL
is set - making it unuseable in io_uring's recvmsg.
Remove MSG_NOSIGNAL from io_recvmsg_prep().
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: David Lamparter <equinox@diac24.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230224150123.128346-1-equinox@diac24.net
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull io_uring ITER_UBUF conversion from Jens Axboe:
"Since we now have ITER_UBUF available, switch to using it for single
ranges as it's more efficient than ITER_IOVEC for that"
* tag 'for-6.3/iter-ubuf-2023-02-16' of git://git.kernel.dk/linux:
block: use iter_ubuf for single range
iov_iter: move iter_ubuf check inside restore WARN
io_uring: use iter_ubuf for single range imports
io_uring: switch network send/recv to ITER_UBUF
iov: add import_ubuf()
|
|
Some requests require being run async as they do not support
non-blocking. Instead of trying to issue these requests, getting -EAGAIN
and then queueing them for async issue, rather just force async upfront.
Add WARN_ON_ONCE to make sure surprising code paths do not come up,
however in those cases the bug would end up being a blocking
io_uring_enter(2) which should not be critical.
Signed-off-by: Dylan Yudaken <dylany@meta.com>
Link: https://lore.kernel.org/r/20230127135227.3646353-3-dylany@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If we're using ring provided buffers with multishot receive, and we end
up doing an io-wq based issue at some points that also needs to select
a buffer, we'll lose the initially assigned buffer group as
io_ring_buffer_select() correctly clears the buffer group list as the
issue isn't serialized by the ctx uring_lock. This is fine for normal
receives as the request puts the buffer and finishes, but for multishot,
we will re-arm and do further receives. On the next trigger for this
multishot receive, the receive will try and pick from a buffer group
whose value is the same as the buffer ID of the las receive. That is
obviously incorrect, and will result in a premature -ENOUFS error for
the receive even if we had available buffers in the correct group.
Cache the buffer group value at prep time, so we can restore it for
future receives. This only needs doing for the above mentioned case, but
just do it by default to keep it easier to read.
Cc: stable@vger.kernel.org
Fixes: b3fdea6ecb55 ("io_uring: multishot recv")
Fixes: 9bb66906f23e ("io_uring: support multishot in recvmsg")
Cc: Dylan Yudaken <dylany@meta.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This is more efficient than iter_iov.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
[merged to 6.2]
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Don't access io_async_msghdr io_netmsg_recycle(), it may be reallocated.
Cc: stable@vger.kernel.org
Fixes: 9bb66906f23e5 ("io_uring: support multishot in recvmsg")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/9e326f4ad4046ddadf15bf34bf3fa58c6372f6b5.1671461985.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If we're not allocating the vectors because the count is below
UIO_FASTIOV, we still do need to properly clear ->free_iov to prevent
an erronous free of on-stack data.
Reported-by: Jiri Slaby <jirislaby@gmail.com>
Fixes: 4c17a496a7a0 ("io_uring/net: fix cleanup double free free_iov init")
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull io_uring updates part two from Jens Axboe:
- Misc fixes (me, Lin)
- Series from Pavel extending the single task exclusive ring mode,
yielding nice improvements for the common case of having a single
ring per thread (Pavel)
- Cleanup for MSG_RING, removing our IOPOLL hack (Pavel)
- Further poll cleanups and fixes (Pavel)
- Misc cleanups and fixes (Pavel)
* tag 'for-6.2/io_uring-next-2022-12-08' of git://git.kernel.dk/linux: (22 commits)
io_uring/msg_ring: flag target ring as having task_work, if needed
io_uring: skip spinlocking for ->task_complete
io_uring: do msg_ring in target task via tw
io_uring: extract a io_msg_install_complete helper
io_uring: get rid of double locking
io_uring: never run tw and fallback in parallel
io_uring: use tw for putting rsrc
io_uring: force multishot CQEs into task context
io_uring: complete all requests in task context
io_uring: don't check overflow flush failures
io_uring: skip overflow CQE posting for dying ring
io_uring: improve io_double_lock_ctx fail handling
io_uring: dont remove file from msg_ring reqs
io_uring: reshuffle issue_flags
io_uring: don't reinstall quiesce node for each tw
io_uring: improve rsrc quiesce refs checks
io_uring: don't raw spin unlock to match cq_lock
io_uring: combine poll tw handlers
io_uring: improve poll warning handling
io_uring: remove ctx variable in io_poll_check_events
...
|
|
Pull io_uring updates from Jens Axboe:
- Always ensure proper ordering in case of CQ ring overflow, which then
means we can remove some work-arounds for that (Dylan)
- Support completion batching for multishot, greatly increasing the
efficiency for those (Dylan)
- Flag epoll/eventfd wakeups done from io_uring, so that we can easily
tell if we're recursing into io_uring again.
Previously, this would have resulted in repeated multishot
notifications if we had a dependency there. That could happen if an
eventfd was registered as the ring eventfd, and we multishot polled
for events on it. Or if an io_uring fd was added to epoll, and
io_uring had a multishot request for the epoll fd.
Test cases here:
https://git.kernel.dk/cgit/liburing/commit/?id=919755a7d0096fda08fb6d65ac54ad8d0fe027cd
Previously these got terminated when the CQ ring eventually
overflowed, now it's handled gracefully (me).
- Tightening of the IOPOLL based completions (Pavel)
- Optimizations of the networking zero-copy paths (Pavel)
- Various tweaks and fixes (Dylan, Pavel)
* tag 'for-6.2/io_uring-2022-12-08' of git://git.kernel.dk/linux: (41 commits)
io_uring: keep unlock_post inlined in hot path
io_uring: don't use complete_post in kbuf
io_uring: spelling fix
io_uring: remove io_req_complete_post_tw
io_uring: allow multishot polled reqs to defer completion
io_uring: remove overflow param from io_post_aux_cqe
io_uring: add lockdep assertion in io_fill_cqe_aux
io_uring: make io_fill_cqe_aux static
io_uring: add io_aux_cqe which allows deferred completion
io_uring: allow defer completion for aux posted cqes
io_uring: defer all io_req_complete_failed
io_uring: always lock in io_apoll_task_func
io_uring: remove iopoll spinlock
io_uring: iopoll protect complete_post
io_uring: inline __io_req_complete_put()
io_uring: remove io_req_tw_post_queue
io_uring: use io_req_task_complete() in timeout
io_uring: hold locks for io_req_complete_failed
io_uring: add completion locking for iopoll
io_uring: kill io_cqring_ev_posted() and __io_cq_unlock_post()
...
|
|
Multishot are posting CQEs outside of the normal request completion
path, which is usually done from within a task work handler. However, it
might be not the case when it's yet to be polled but has been punted to
io-wq. Make it abide ->task_complete and push it to the polling path
when executed by io-wq.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/d7714aaff583096769a0f26e8e747759e556feb1.1670384893.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
READ/WRITE proved to be actively confusing - the meanings are
"data destination, as used with read(2)" and "data source, as
used with write(2)", but people keep interpreting those as
"we read data from it" and "we write data to it", i.e. exactly
the wrong way.
Call them ITER_DEST and ITER_SOURCE - at least that is harder
to misinterpret...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Use the just introduced deferred post cqe completion state when possible
in io_aux_cqe. If not possible fallback to io_post_aux_cqe.
This introduces a complication because of allow_overflow. For deferred
completions we cannot know without locking the completion_lock if it will
overflow (and even if we locked it, another post could sneak in and cause
this cqe to be in overflow).
However since overflow protection is mostly a best effort defence in depth
to prevent infinite loops of CQEs for poll, just checking the overflow bit
is going to be good enough and will result in at most 16 (array size of
deferred cqes) overflows.
Suggested-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Dylan Yudaken <dylany@meta.com>
Link: https://lore.kernel.org/r/20221124093559.3780686-6-dylany@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
With commit aa1df3a360a0 ("io_uring: fix CQE reordering"), there are
stronger guarantees for overflow ordering. Specifically ensuring that
userspace will not receive out of order receive CQEs. Therefore this is
not needed any more for recv/recvmsg.
Signed-off-by: Dylan Yudaken <dylany@meta.com>
Link: https://lore.kernel.org/r/20221107125236.260132-4-dylany@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This is no longer needed after commit aa1df3a360a0 ("io_uring: fix CQE
reordering"), since all reordering is now taken care of.
This reverts commit cbd25748545c ("io_uring: fix multishot accept
ordering").
Signed-off-by: Dylan Yudaken <dylany@meta.com>
Link: https://lore.kernel.org/r/20221107125236.260132-2-dylany@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Fixes two errors:
"ERROR: do not use assignment in if condition
130: FILE: io_uring/net.c:130:
+ if (!(issue_flags & IO_URING_F_UNLOCKED) &&
ERROR: do not use assignment in if condition
599: FILE: io_uring/poll.c:599:
+ } else if (!(issue_flags & IO_URING_F_UNLOCKED) &&"
reported by checkpatch.pl in net.c and poll.c .
Signed-off-by: Xinghui Li <korantli@tencent.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20221102082503.32236-1-korantwork@gmail.com
[axboe: style tweaks]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We can also move mm accounting to the extended callbacks. It removes a
few cycles from the hot path including skipping one function call and
setting io_req_task_complete as a callback directly. For user backed I/O
it shouldn't make any difference taking into considering atomic mm
accounting and page pinning.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/1062f270273ad11c1b7b45ec59a6a317533d5e64.1667557923.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add custom tw and notif callbacks on top of usual bits also handling zc
reporting. That moves it from the hot path.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/40de4a6409042478e1f35adc4912e23226cb1b5c.1667557923.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It might be useful for applications to detect if a zero copy transfer with
SEND[MSG]_ZC was actually possible or not. The application can fallback to
plain SEND[MSG] in order to avoid the overhead of two cqes per request. Or
it can generate a log message that could indicate to an administrator that
no zero copy was possible and could explain degraded performance.
Cc: stable@vger.kernel.org # 6.1
Link: https://lore.kernel.org/io-uring/fb6a7599-8a9b-15e5-9b64-6cd9d01c6ff4@gmail.com/T/#m2b0d9df94ce43b0e69e6c089bdff0ce6babbdfaa
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/8945b01756d902f5d5b0667f20b957ad3f742e5e.1666895626.git.metze@samba.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Having REQ_F_POLLED set doesn't guarantee that the request is
executed as a multishot from the polling path. Fortunately for us, if
the code thinks it's multishot issue when it's not, it can only ask to
skip completion so leaking the request. Use issue_flags to mark
multipoll issues.
Cc: stable@vger.kernel.org
Fixes: 1300ebb20286b ("io_uring: multishot recv")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/37762040ba9c52b81b92a2f5ebfd4ee484088951.1668710222.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Having REQ_F_POLLED set doesn't guarantee that the request is
executed as a multishot from the polling path. Fortunately for us, if
the code thinks it's multishot issue when it's not, it can only ask to
skip completion so leaking the request. Use issue_flags to mark
multipoll issues.
Cc: stable@vger.kernel.org
Fixes: 390ed29b5e425 ("io_uring: add IORING_ACCEPT_MULTISHOT for accept")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/7700ac57653f2823e30b34dc74da68678c0c5f13.1668710222.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The previous patch fails zerocopy send requests for protocols that don't
support it, do the same for zerocopy sendmsg.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/0854e7bb4c3d810a48ec8b5853e2f61af36a0467.1666346426.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If a protocol doesn't support zerocopy it will silently fall back to
copying. This type of behaviour has always been a source of troubles
so it's better to fail such requests instead.
Cc: <stable@vger.kernel.org> # 6.0
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/2db3c7f16bb6efab4b04569cd16e6242b40c5cb3.1666346426.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|