| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
With BPF_PROBE_MEM, BPF allows de-referencing an untrusted pointer. To
thwart invalid memory accesses, the JITs add an exception table entry
for all such accesses. But in case the src_reg + offset is a userspace
address, the BPF program might read that memory if the user has
mapped it.
Make the verifier add guard instructions around such memory accesses and
skip the load if the address falls into the userspace region.
The JITs need to implement bpf_arch_uaddress_limit() to define where
the userspace addresses end for that architecture or TASK_SIZE is taken
as default.
The implementation is as follows:
REG_AX = SRC_REG
if(offset)
REG_AX += offset;
REG_AX >>= 32;
if (REG_AX <= (uaddress_limit >> 32))
DST_REG = 0;
else
DST_REG = *(size *)(SRC_REG + offset);
Comparing just the upper 32 bits of the load address with the upper
32 bits of uaddress_limit implies that the values are being aligned down
to a 4GB boundary before comparison.
The above means that all loads with address <= uaddress_limit + 4GB are
skipped. This is acceptable because there is a large hole (much larger
than 4GB) between userspace and kernel space memory, therefore a
correctly functioning BPF program should not access this 4GB memory
above the userspace.
Let's analyze what this patch does to the following fentry program
dereferencing an untrusted pointer:
SEC("fentry/tcp_v4_connect")
int BPF_PROG(fentry_tcp_v4_connect, struct sock *sk)
{
*(volatile long *)sk;
return 0;
}
BPF Program before | BPF Program after
------------------ | -----------------
0: (79) r1 = *(u64 *)(r1 +0) 0: (79) r1 = *(u64 *)(r1 +0)
-----------------------------------------------------------------------
1: (79) r1 = *(u64 *)(r1 +0) --\ 1: (bf) r11 = r1
----------------------------\ \ 2: (77) r11 >>= 32
2: (b7) r0 = 0 \ \ 3: (b5) if r11 <= 0x8000 goto pc+2
3: (95) exit \ \-> 4: (79) r1 = *(u64 *)(r1 +0)
\ 5: (05) goto pc+1
\ 6: (b7) r1 = 0
\--------------------------------------
7: (b7) r0 = 0
8: (95) exit
As you can see from above, in the best case (off=0), 5 extra instructions
are emitted.
Now, we analyze the same program after it has gone through the JITs of
ARM64 and RISC-V architectures. We follow the single load instruction
that has the untrusted pointer and see what instrumentation has been
added around it.
x86-64 JIT
==========
JIT's Instrumentation
(upstream)
---------------------
0: nopl 0x0(%rax,%rax,1)
5: xchg %ax,%ax
7: push %rbp
8: mov %rsp,%rbp
b: mov 0x0(%rdi),%rdi
---------------------------------
f: movabs $0x800000000000,%r11
19: cmp %r11,%rdi
1c: jb 0x000000000000002a
1e: mov %rdi,%r11
21: add $0x0,%r11
28: jae 0x000000000000002e
2a: xor %edi,%edi
2c: jmp 0x0000000000000032
2e: mov 0x0(%rdi),%rdi
---------------------------------
32: xor %eax,%eax
34: leave
35: ret
The x86-64 JIT already emits some instructions to protect against user
memory access. This patch doesn't make any changes for the x86-64 JIT.
ARM64 JIT
=========
No Intrumentation Verifier's Instrumentation
(upstream) (This patch)
----------------- --------------------------
0: add x9, x30, #0x0 0: add x9, x30, #0x0
4: nop 4: nop
8: paciasp 8: paciasp
c: stp x29, x30, [sp, #-16]! c: stp x29, x30, [sp, #-16]!
10: mov x29, sp 10: mov x29, sp
14: stp x19, x20, [sp, #-16]! 14: stp x19, x20, [sp, #-16]!
18: stp x21, x22, [sp, #-16]! 18: stp x21, x22, [sp, #-16]!
1c: stp x25, x26, [sp, #-16]! 1c: stp x25, x26, [sp, #-16]!
20: stp x27, x28, [sp, #-16]! 20: stp x27, x28, [sp, #-16]!
24: mov x25, sp 24: mov x25, sp
28: mov x26, #0x0 28: mov x26, #0x0
2c: sub x27, x25, #0x0 2c: sub x27, x25, #0x0
30: sub sp, sp, #0x0 30: sub sp, sp, #0x0
34: ldr x0, [x0] 34: ldr x0, [x0]
--------------------------------------------------------------------------------
38: ldr x0, [x0] ----------\ 38: add x9, x0, #0x0
-----------------------------------\\ 3c: lsr x9, x9, #32
3c: mov x7, #0x0 \\ 40: cmp x9, #0x10, lsl #12
40: mov sp, sp \\ 44: b.ls 0x0000000000000050
44: ldp x27, x28, [sp], #16 \\--> 48: ldr x0, [x0]
48: ldp x25, x26, [sp], #16 \ 4c: b 0x0000000000000054
4c: ldp x21, x22, [sp], #16 \ 50: mov x0, #0x0
50: ldp x19, x20, [sp], #16 \---------------------------------------
54: ldp x29, x30, [sp], #16 54: mov x7, #0x0
58: add x0, x7, #0x0 58: mov sp, sp
5c: autiasp 5c: ldp x27, x28, [sp], #16
60: ret 60: ldp x25, x26, [sp], #16
64: nop 64: ldp x21, x22, [sp], #16
68: ldr x10, 0x0000000000000070 68: ldp x19, x20, [sp], #16
6c: br x10 6c: ldp x29, x30, [sp], #16
70: add x0, x7, #0x0
74: autiasp
78: ret
7c: nop
80: ldr x10, 0x0000000000000088
84: br x10
There are 6 extra instructions added in ARM64 in the best case. This will
become 7 in the worst case (off != 0).
RISC-V JIT (RISCV_ISA_C Disabled)
==========
No Intrumentation Verifier's Instrumentation
(upstream) (This patch)
----------------- --------------------------
0: nop 0: nop
4: nop 4: nop
8: li a6, 33 8: li a6, 33
c: addi sp, sp, -16 c: addi sp, sp, -16
10: sd s0, 8(sp) 10: sd s0, 8(sp)
14: addi s0, sp, 16 14: addi s0, sp, 16
18: ld a0, 0(a0) 18: ld a0, 0(a0)
---------------------------------------------------------------
1c: ld a0, 0(a0) --\ 1c: mv t0, a0
--------------------------\ \ 20: srli t0, t0, 32
20: li a5, 0 \ \ 24: lui t1, 4096
24: ld s0, 8(sp) \ \ 28: sext.w t1, t1
28: addi sp, sp, 16 \ \ 2c: bgeu t1, t0, 12
2c: sext.w a0, a5 \ \--> 30: ld a0, 0(a0)
30: ret \ 34: j 8
\ 38: li a0, 0
\------------------------------
3c: li a5, 0
40: ld s0, 8(sp)
44: addi sp, sp, 16
48: sext.w a0, a5
4c: ret
There are 7 extra instructions added in RISC-V.
Fixes: 800834285361 ("bpf, arm64: Add BPF exception tables")
Reported-by: Breno Leitao <leitao@debian.org>
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Link: https://lore.kernel.org/r/20240424100210.11982-2-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Long ago a map file descriptor in a pseudo ldimm64 instruction could
only be present as an immediate value insn[0].imm, and thus this value
was used in a verbose verifier message printed when the file descriptor
wasn't valid. Since addition of BPF_PSEUDO_MAP_IDX_VALUE/BPF_PSEUDO_MAP_IDX
the insn[0].imm field can also contain an index pointing to the file
descriptor in the attr.fd_array array. However, if the file descriptor
is invalid, the verifier still prints the verbose message containing
value of insn[0].imm. Patch the verifier message to always print the
actual file descriptor value.
Fixes: 387544bfa291 ("bpf: Introduce fd_idx")
Signed-off-by: Anton Protopopov <aspsk@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240412141100.3562942-1-aspsk@isovalent.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, bluetooth and bpf.
Fairly usual collection of driver and core fixes. The large selftest
accompanying one of the fixes is also becoming a common occurrence.
Current release - regressions:
- ipv6: fix infinite recursion in fib6_dump_done()
- net/rds: fix possible null-deref in newly added error path
Current release - new code bugs:
- net: do not consume a full cacheline for system_page_pool
- bpf: fix bpf_arena-related file descriptor leaks in the verifier
- drv: ice: fix freeing uninitialized pointers, fixing misuse of the
newfangled __free() auto-cleanup
Previous releases - regressions:
- x86/bpf: fixes the BPF JIT with retbleed=stuff
- xen-netfront: add missing skb_mark_for_recycle, fix page pool
accounting leaks, revealed by recently added explicit warning
- tcp: fix bind() regression for v6-only wildcard and v4-mapped-v6
non-wildcard addresses
- Bluetooth:
- replace "hci_qca: Set BDA quirk bit if fwnode exists in DT" with
better workarounds to un-break some buggy Qualcomm devices
- set conn encrypted before conn establishes, fix re-connecting to
some headsets which use slightly unusual sequence of msgs
- mptcp:
- prevent BPF accessing lowat from a subflow socket
- don't account accept() of non-MPC client as fallback to TCP
- drv: mana: fix Rx DMA datasize and skb_over_panic
- drv: i40e: fix VF MAC filter removal
Previous releases - always broken:
- gro: various fixes related to UDP tunnels - netns crossing
problems, incorrect checksum conversions, and incorrect packet
transformations which may lead to panics
- bpf: support deferring bpf_link dealloc to after RCU grace period
- nf_tables:
- release batch on table validation from abort path
- release mutex after nft_gc_seq_end from abort path
- flush pending destroy work before exit_net release
- drv: r8169: skip DASH fw status checks when DASH is disabled"
* tag 'net-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits)
netfilter: validate user input for expected length
net/sched: act_skbmod: prevent kernel-infoleak
net: usb: ax88179_178a: avoid the interface always configured as random address
net: dsa: sja1105: Fix parameters order in sja1110_pcs_mdio_write_c45()
net: ravb: Always update error counters
net: ravb: Always process TX descriptor ring
netfilter: nf_tables: discard table flag update with pending basechain deletion
netfilter: nf_tables: Fix potential data-race in __nft_flowtable_type_get()
netfilter: nf_tables: reject new basechain after table flag update
netfilter: nf_tables: flush pending destroy work before exit_net release
netfilter: nf_tables: release mutex after nft_gc_seq_end from abort path
netfilter: nf_tables: release batch on table validation from abort path
Revert "tg3: Remove residual error handling in tg3_suspend"
tg3: Remove residual error handling in tg3_suspend
net: mana: Fix Rx DMA datasize and skb_over_panic
net/sched: fix lockdep splat in qdisc_tree_reduce_backlog()
net: phy: micrel: lan8814: Fix when enabling/disabling 1-step timestamping
net: stmmac: fix rx queue priority assignment
net: txgbe: fix i2c dev name cannot match clkdev
net: fec: Set mac_managed_pm during probe
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Deduplicate Kconfig entries for CONFIG_CXL_PMU
- Fix unselectable choice entry in MIPS Kconfig, and forbid this
structure
- Remove unused include/asm-generic/export.h
- Fix a NULL pointer dereference bug in modpost
- Enable -Woverride-init warning consistently with W=1
- Drop KCSAN flags from *.mod.c files
* tag 'kbuild-fixes-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: Fix typo HEIGTH to HEIGHT
Documentation/llvm: Note s390 LLVM=1 support with LLVM 18.1.0 and newer
kbuild: Disable KCSAN for autogenerated *.mod.c intermediaries
kbuild: make -Woverride-init warnings more consistent
modpost: do not make find_tosym() return NULL
export.h: remove include/asm-generic/export.h
kconfig: do not reparent the menu inside a choice block
MIPS: move unselectable FIT_IMAGE_FDT_EPM5 out of the "System type" choice
cxl: remove CONFIG_CXL_PMU entry in drivers/cxl/Kconfig
|
|
The -Woverride-init warn about code that may be intentional or not,
but the inintentional ones tend to be real bugs, so there is a bit of
disagreement on whether this warning option should be enabled by default
and we have multiple settings in scripts/Makefile.extrawarn as well as
individual subsystems.
Older versions of clang only supported -Wno-initializer-overrides with
the same meaning as gcc's -Woverride-init, though all supported versions
now work with both. Because of this difference, an earlier cleanup of
mine accidentally turned the clang warning off for W=1 builds and only
left it on for W=2, while it's still enabled for gcc with W=1.
There is also one driver that only turns the warning off for newer
versions of gcc but not other compilers, and some but not all the
Makefiles still use a cc-disable-warning conditional that is no
longer needed with supported compilers here.
Address all of the above by removing the special cases for clang
and always turning the warning off unconditionally where it got
in the way, using the syntax that is supported by both compilers.
Fixes: 2cd3271b7a31 ("kbuild: avoid duplicate warning options")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The resolve_pseudo_ldimm64() function might have leaked file
descriptors when BPF_MAP_TYPE_ARENA was used in a program (some
error paths missed a corresponding fdput). Add missing fdputs.
v2:
remove unrelated changes from the fix
Fixes: 6082b6c328b5 ("bpf: Recognize addr_space_cast instruction in the verifier.")
Signed-off-by: Anton Protopopov <aspsk@isovalent.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Link: https://lore.kernel.org/r/20240329071106.67968-1-aspsk@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
BPF link for some program types is passed as a "context" which can be
used by those BPF programs to look up additional information. E.g., for
multi-kprobes and multi-uprobes, link is used to fetch BPF cookie values.
Because of this runtime dependency, when bpf_link refcnt drops to zero
there could still be active BPF programs running accessing link data.
This patch adds generic support to defer bpf_link dealloc callback to
after RCU GP, if requested. This is done by exposing two different
deallocation callbacks, one synchronous and one deferred. If deferred
one is provided, bpf_link_free() will schedule dealloc_deferred()
callback to happen after RCU GP.
BPF is using two flavors of RCU: "classic" non-sleepable one and RCU
tasks trace one. The latter is used when sleepable BPF programs are
used. bpf_link_free() accommodates that by checking underlying BPF
program's sleepable flag, and goes either through normal RCU GP only for
non-sleepable, or through RCU tasks trace GP *and* then normal RCU GP
(taking into account rcu_trace_implies_rcu_gp() optimization), if BPF
program is sleepable.
We use this for multi-kprobe and multi-uprobe links, which dereference
link during program run. We also preventively switch raw_tp link to use
deferred dealloc callback, as upcoming changes in bpf-next tree expose
raw_tp link data (specifically, cookie value) to BPF program at runtime
as well.
Fixes: 0dcac2725406 ("bpf: Add multi kprobe link")
Fixes: 89ae89f53d20 ("bpf: Add multi uprobe link")
Reported-by: syzbot+981935d9485a560bfbcb@syzkaller.appspotmail.com
Reported-by: syzbot+2cb5a6c573e98db598cc@syzkaller.appspotmail.com
Reported-by: syzbot+62d8b26793e8a2bd0516@syzkaller.appspotmail.com
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20240328052426.3042617-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch re-introduces protection against the size of access to stack
memory being negative; the access size can appear negative as a result
of overflowing its signed int representation. This should not actually
happen, as there are other protections along the way, but we should
protect against it anyway. One code path was missing such protections
(fixed in the previous patch in the series), causing out-of-bounds array
accesses in check_stack_range_initialized(). This patch causes the
verification of a program with such a non-sensical access size to fail.
This check used to exist in a more indirect way, but was inadvertendly
removed in a833a17aeac7.
Fixes: a833a17aeac7 ("bpf: Fix verification of indirect var-off stack access")
Reported-by: syzbot+33f4297b5f927648741a@syzkaller.appspotmail.com
Reported-by: syzbot+aafd0513053a1cbf52ef@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/bpf/CAADnVQLORV5PT0iTAhRER+iLBTkByCYNBYyvBSgjN1T31K+gOw@mail.gmail.com/
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Andrei Matei <andreimatei1@gmail.com>
Link: https://lore.kernel.org/r/20240327024245.318299-3-andreimatei1@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch adds a missing check to bloom filter creating, rejecting
values above KMALLOC_MAX_SIZE. This brings the bloom map in line with
many other map types.
The lack of this protection can cause kernel crashes for value sizes
that overflow int's. Such a crash was caught by syzkaller. The next
patch adds more guard-rails at a lower level.
Signed-off-by: Andrei Matei <andreimatei1@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240327024245.318299-2-andreimatei1@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
With [1], crash dump specific code is moved out of CONFIG_KEXEC_CORE
and placed under CONFIG_CRASH_DUMP, where it is more appropriate.
And since CONFIG_KEXEC & !CONFIG_CRASH_DUMP build option is supported
with that, it led to the below warning:
"WARN: resolve_btfids: unresolved symbol crash_kexec"
Fix it by using the appropriate #ifdef.
[1] https://lore.kernel.org/all/20240124051254.67105-1-bhe@redhat.com/
Acked-by: Baoquan He <bhe@redhat.com>
Fixes: 02aff8480533 ("crash: split crash dumping code out from kexec_core.c")
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Link: https://lore.kernel.org/r/20240319080152.36987-1-hbathini@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-03-25
The following pull-request contains BPF updates for your *net* tree.
We've added 17 non-merge commits during the last 12 day(s) which contain
a total of 19 files changed, 184 insertions(+), 61 deletions(-).
The main changes are:
1) Fix an arm64 BPF JIT bug in BPF_LDX_MEMSX implementation's offset handling
found via test_bpf module, from Puranjay Mohan.
2) Various fixups to the BPF arena code in particular in the BPF verifier and
around BPF selftests to match latest corresponding LLVM implementation,
from Puranjay Mohan and Alexei Starovoitov.
3) Fix xsk to not assume that metadata is always requested in TX completion,
from Stanislav Fomichev.
4) Fix riscv BPF JIT's kfunc parameter incompatibility between BPF and the riscv
ABI which requires sign-extension on int/uint, from Pu Lehui.
5) Fix s390x BPF JIT's bpf_plt pointer arithmetic which triggered a crash when
testing struct_ops, from Ilya Leoshkevich.
6) Fix libbpf's arena mmap handling which had incorrect u64-to-pointer cast on
32-bit architectures, from Andrii Nakryiko.
7) Fix libbpf to define MFD_CLOEXEC when not available, from Arnaldo Carvalho de Melo.
8) Fix arm64 BPF JIT implementation for 32bit unconditional bswap which
resulted in an incorrect swap as indicated by test_bpf, from Artem Savkov.
9) Fix BPF man page build script to use silent mode, from Hangbin Liu.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
riscv, bpf: Fix kfunc parameters incompatibility between bpf and riscv abi
bpf: verifier: reject addr_space_cast insn without arena
selftests/bpf: verifier_arena: fix mmap address for arm64
bpf: verifier: fix addr_space_cast from as(1) to as(0)
libbpf: Define MFD_CLOEXEC if not available
arm64: bpf: fix 32bit unconditional bswap
bpf, arm64: fix bug in BPF_LDX_MEMSX
libbpf: fix u64-to-pointer cast on 32-bit arches
s390/bpf: Fix bpf_plt pointer arithmetic
xsk: Don't assume metadata is always requested in TX completion
selftests/bpf: Add arena test case for 4Gbyte corner case
selftests/bpf: Remove hard coded PAGE_SIZE macro.
libbpf, selftests/bpf: Adjust libbpf, bpftool, selftests to match LLVM
bpf: Clarify bpf_arena comments.
MAINTAINERS: Update email address for Quentin Monnet
scripts/bpf_doc: Use silent mode when exec make cmd
bpf: Temporarily disable atomic operations in BPF arena
====================
Link: https://lore.kernel.org/r/20240325213520.26688-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The verifier allows using the addr_space_cast instruction in a program
that doesn't have an associated arena. This was caught in the form an
invalid memory access in do_misc_fixups() when while converting
addr_space_cast to a normal 32-bit mov, env->prog->aux->arena was
dereferenced to check for BPF_F_NO_USER_CONV flag.
Reject programs that include the addr_space_cast instruction but don't
have an associated arena.
root@rv-tester:~# ./reproducer
Unable to handle kernel access to user memory without uaccess routines at virtual address 0000000000000030
Oops [#1]
[<ffffffff8017eeaa>] do_misc_fixups+0x43c/0x1168
[<ffffffff801936d6>] bpf_check+0xda8/0x22b6
[<ffffffff80174b32>] bpf_prog_load+0x486/0x8dc
[<ffffffff80176566>] __sys_bpf+0xbd8/0x214e
[<ffffffff80177d14>] __riscv_sys_bpf+0x22/0x2a
[<ffffffff80d2493a>] do_trap_ecall_u+0x102/0x17c
[<ffffffff80d3048c>] ret_from_exception+0x0/0x64
Fixes: 6082b6c328b5 ("bpf: Recognize addr_space_cast instruction in the verifier.")
Reported-by: xingwei lee <xrivendell7@gmail.com>
Reported-by: yue sun <samsun1006219@gmail.com>
Closes: https://lore.kernel.org/bpf/CABOYnLz09O1+2gGVJuCxd_24a-7UueXzV-Ff+Fr+h5EKFDiYCQ@mail.gmail.com/
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Link: https://lore.kernel.org/r/20240322153518.11555-1-puranjay12@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The verifier currently converts addr_space_cast from as(1) to as(0) that
is: BPF_ALU64 | BPF_MOV | BPF_X with off=1 and imm=1
to
BPF_ALU | BPF_MOV | BPF_X with imm=1 (32-bit mov)
Because of this imm=1, the JITs that have bpf_jit_needs_zext() == true,
interpret the converted instruction as BPF_ZEXT_REG(DST) which is a
special form of mov32, used for doing explicit zero extension on dst.
These JITs will just zero extend the dst reg and will not move the src to
dst before the zext.
Fix do_misc_fixups() to set imm=0 when converting addr_space_cast to a
normal mov32.
The JITs that have bpf_jit_needs_zext() == true rely on the verifier to
emit zext instructions. Mark dst_reg as subreg when doing cast from
as(1) to as(0) so the verifier emits a zext instruction after the mov.
Fixes: 6082b6c328b5 ("bpf: Recognize addr_space_cast instruction in the verifier.")
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Link: https://lore.kernel.org/r/20240321153939.113996-1-puranjay12@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When there are heavy load, cpumap kernel threads can be busy polling
packets from redirect queues and block out RCU tasks from reaching
quiescent states. It is insufficient to just call cond_resched() in such
context. Periodically raise a consolidated RCU QS before cond_resched
fixes the problem.
Fixes: 6710e1126934 ("bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP")
Reviewed-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://lore.kernel.org/r/c17b9f1517e19d813da3ede5ed33ee18496bb5d8.1710877680.git.yan@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Clarify two bpf_arena comments, use existing SZ_4G #define,
improve page_cnt check.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20240315021834.62988-2-alexei.starovoitov@gmail.com
|
|
Currently, the x86 JIT handling PROBE_MEM32 tagged accesses is not
equipped to handle atomic accesses into PTR_TO_ARENA, as no PROBE_MEM32
tagging is performed and no handling is enabled for them.
This will lead to unsafety as the offset into arena will dereferenced
directly without turning it into a base + offset access into the arena
region.
Since the changes to the x86 JIT will be fairly involved, for now,
temporarily disallow use of PTR_TO_ARENA as the destination operand for
atomics until support is added to the JIT backend.
Fixes: 2fe99eb0ccf2 ("bpf: Add x86-64 JIT support for PROBE_MEM32 pseudo instructions.")
Reported-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Message-ID: <20240314174931.98702-1-puranjay12@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says:
====================
pull-request: bpf-next 2024-03-11
We've added 59 non-merge commits during the last 9 day(s) which contain
a total of 88 files changed, 4181 insertions(+), 590 deletions(-).
The main changes are:
1) Enforce VM_IOREMAP flag and range in ioremap_page_range and introduce
VM_SPARSE kind and vm_area_[un]map_pages to be used in bpf_arena,
from Alexei.
2) Introduce bpf_arena which is sparse shared memory region between bpf
program and user space where structures inside the arena can have
pointers to other areas of the arena, and pointers work seamlessly for
both user-space programs and bpf programs, from Alexei and Andrii.
3) Introduce may_goto instruction that is a contract between the verifier
and the program. The verifier allows the program to loop assuming it's
behaving well, but reserves the right to terminate it, from Alexei.
4) Use IETF format for field definitions in the BPF standard
document, from Dave.
5) Extend struct_ops libbpf APIs to allow specify version suffixes for
stuct_ops map types, share the same BPF program between several map
definitions, and other improvements, from Eduard.
6) Enable struct_ops support for more than one page in trampolines,
from Kui-Feng.
7) Support kCFI + BPF on riscv64, from Puranjay.
8) Use bpf_prog_pack for arm64 bpf trampoline, from Puranjay.
9) Fix roundup_pow_of_two undefined behavior on 32-bit archs, from Toke.
====================
Link: https://lore.kernel.org/r/20240312003646.8692-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
prog->aux->sleepable is checked very frequently as part of (some) BPF
program run hot paths. So this extra aux indirection seems wasteful and
on busy systems might cause unnecessary memory cache misses.
Let's move sleepable flag into prog itself to eliminate unnecessary
pointer dereference.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Message-ID: <20240309004739.2961431-1-andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
On some architectures like ARM64, PMD_SIZE can be really large in some
configurations. Like with CONFIG_ARM64_64K_PAGES=y the PMD_SIZE is
512MB.
Use 2MB * num_possible_nodes() as the size for allocations done through
the prog pack allocator. On most architectures, PMD_SIZE will be equal
to 2MB in case of 4KB pages and will be greater than 2MB for bigger page
sizes.
Fixes: ea2babac63d4 ("bpf: Simplify bpf_prog_pack_[size|mask]")
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Closes: https://lore.kernel.org/all/7e216c88-77ee-47b8-becc-a0f780868d3c@sirena.org.uk/
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202403092219.dhgcuz2G-lkp@intel.com/
Suggested-by: Song Liu <song@kernel.org>
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Message-ID: <20240311122722.86232-1-puranjay12@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
In global bpf functions recognize btf_decl_tag("arg:arena") as PTR_TO_ARENA.
Note, when the verifier sees:
__weak void foo(struct bar *p)
it recognizes 'p' as PTR_TO_MEM and 'struct bar' has to be a struct with scalars.
Hence the only way to use arena pointers in global functions is to tag them with "arg:arena".
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20240308010812.89848-7-alexei.starovoitov@gmail.com
|
|
rY = addr_space_cast(rX, 0, 1) tells the verifier that rY->type = PTR_TO_ARENA.
Any further operations on PTR_TO_ARENA register have to be in 32-bit domain.
The verifier will mark load/store through PTR_TO_ARENA with PROBE_MEM32.
JIT will generate them as kern_vm_start + 32bit_addr memory accesses.
rY = addr_space_cast(rX, 1, 0) tells the verifier that rY->type = unknown scalar.
If arena->map_flags has BPF_F_NO_USER_CONV set then convert cast_user to mov32 as well.
Otherwise JIT will convert it to:
rY = (u32)rX;
if (rY)
rY |= arena->user_vm_start & ~(u64)~0U;
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240308010812.89848-6-alexei.starovoitov@gmail.com
|
|
LLVM generates bpf_addr_space_cast instruction while translating
pointers between native (zero) address space and
__attribute__((address_space(N))).
The addr_space=1 is reserved as bpf_arena address space.
rY = addr_space_cast(rX, 0, 1) is processed by the verifier and
converted to normal 32-bit move: wX = wY
rY = addr_space_cast(rX, 1, 0) has to be converted by JIT:
aux_reg = upper_32_bits of arena->user_vm_start
aux_reg <<= 32
wX = wY // clear upper 32 bits of dst register
if (wX) // if not zero add upper bits of user_vm_start
wX |= aux_reg
JIT can do it more efficiently:
mov dst_reg32, src_reg32 // 32-bit move
shl dst_reg, 32
or dst_reg, user_vm_start
rol dst_reg, 32
xor r11, r11
test dst_reg32, dst_reg32 // check if lower 32-bit are zero
cmove r11, dst_reg // if so, set dst_reg to zero
// Intel swapped src/dst register encoding in CMOVcc
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20240308010812.89848-5-alexei.starovoitov@gmail.com
|
|
LLVM generates rX = addr_space_cast(rY, dst_addr_space, src_addr_space)
instruction when pointers in non-zero address space are used by the bpf
program. Recognize this insn in uapi and in bpf disassembler.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20240308010812.89848-3-alexei.starovoitov@gmail.com
|
|
Introduce bpf_arena, which is a sparse shared memory region between the bpf
program and user space.
Use cases:
1. User space mmap-s bpf_arena and uses it as a traditional mmap-ed
anonymous region, like memcached or any key/value storage. The bpf
program implements an in-kernel accelerator. XDP prog can search for
a key in bpf_arena and return a value without going to user space.
2. The bpf program builds arbitrary data structures in bpf_arena (hash
tables, rb-trees, sparse arrays), while user space consumes it.
3. bpf_arena is a "heap" of memory from the bpf program's point of view.
The user space may mmap it, but bpf program will not convert pointers
to user base at run-time to improve bpf program speed.
Initially, the kernel vm_area and user vma are not populated. User space
can fault in pages within the range. While servicing a page fault,
bpf_arena logic will insert a new page into the kernel and user vmas. The
bpf program can allocate pages from that region via
bpf_arena_alloc_pages(). This kernel function will insert pages into the
kernel vm_area. The subsequent fault-in from user space will populate that
page into the user vma. The BPF_F_SEGV_ON_FAULT flag at arena creation time
can be used to prevent fault-in from user space. In such a case, if a page
is not allocated by the bpf program and not present in the kernel vm_area,
the user process will segfault. This is useful for use cases 2 and 3 above.
bpf_arena_alloc_pages() is similar to user space mmap(). It allocates pages
either at a specific address within the arena or allocates a range with the
maple tree. bpf_arena_free_pages() is analogous to munmap(), which frees
pages and removes the range from the kernel vm_area and from user process
vmas.
bpf_arena can be used as a bpf program "heap" of up to 4GB. The speed of
bpf program is more important than ease of sharing with user space. This is
use case 3. In such a case, the BPF_F_NO_USER_CONV flag is recommended.
It will tell the verifier to treat the rX = bpf_arena_cast_user(rY)
instruction as a 32-bit move wX = wY, which will improve bpf prog
performance. Otherwise, bpf_arena_cast_user is translated by JIT to
conditionally add the upper 32 bits of user vm_start (if the pointer is not
NULL) to arena pointers before they are stored into memory. This way, user
space sees them as valid 64-bit pointers.
Diff https://github.com/llvm/llvm-project/pull/84410 enables LLVM BPF
backend generate the bpf_addr_space_cast() instruction to cast pointers
between address_space(1) which is reserved for bpf_arena pointers and
default address space zero. All arena pointers in a bpf program written in
C language are tagged as __attribute__((address_space(1))). Hence, clang
provides helpful diagnostics when pointers cross address space. Libbpf and
the kernel support only address_space == 1. All other address space
identifiers are reserved.
rX = bpf_addr_space_cast(rY, /* dst_as */ 1, /* src_as */ 0) tells the
verifier that rX->type = PTR_TO_ARENA. Any further operations on
PTR_TO_ARENA register have to be in the 32-bit domain. The verifier will
mark load/store through PTR_TO_ARENA with PROBE_MEM32. JIT will generate
them as kern_vm_start + 32bit_addr memory accesses. The behavior is similar
to copy_from_kernel_nofault() except that no address checks are necessary.
The address is guaranteed to be in the 4GB range. If the page is not
present, the destination register is zeroed on read, and the operation is
ignored on write.
rX = bpf_addr_space_cast(rY, 0, 1) tells the verifier that rX->type =
unknown scalar. If arena->map_flags has BPF_F_NO_USER_CONV set, then the
verifier converts such cast instructions to mov32. Otherwise, JIT will emit
native code equivalent to:
rX = (u32)rY;
if (rY)
rX |= clear_lo32_bits(arena->user_vm_start); /* replace hi32 bits in rX */
After such conversion, the pointer becomes a valid user pointer within
bpf_arena range. The user process can access data structures created in
bpf_arena without any additional computations. For example, a linked list
built by a bpf program can be walked natively by user space.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Barret Rhoden <brho@google.com>
Link: https://lore.kernel.org/bpf/20240308010812.89848-2-alexei.starovoitov@gmail.com
|
|
skbuff_cache, skbuff_fclone_cache and skb_small_head_cache
are used in rx/tx fast paths.
Move them to net_hotdata for better cache locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-11-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The stackmap code relies on roundup_pow_of_two() to compute the number
of hash buckets, and contains an overflow check by checking if the
resulting value is 0. However, on 32-bit arches, the roundup code itself
can overflow by doing a 32-bit left-shift of an unsigned long value,
which is undefined behaviour, so it is not guaranteed to truncate
neatly. This was triggered by syzbot on the DEVMAP_HASH type, which
contains the same check, copied from the hashtab code.
The commit in the fixes tag actually attempted to fix this, but the fix
did not account for the UB, so the fix only works on CPUs where an
overflow does result in a neat truncation to zero, which is not
guaranteed. Checking the value before rounding does not have this
problem.
Fixes: 6183f4d3a0a2 ("bpf: Check for integer overflow when using roundup_pow_of_two()")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Bui Quang Minh <minhquangbui99@gmail.com>
Message-ID: <20240307120340.99577-4-toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The hashtab code relies on roundup_pow_of_two() to compute the number of
hash buckets, and contains an overflow check by checking if the
resulting value is 0. However, on 32-bit arches, the roundup code itself
can overflow by doing a 32-bit left-shift of an unsigned long value,
which is undefined behaviour, so it is not guaranteed to truncate
neatly. This was triggered by syzbot on the DEVMAP_HASH type, which
contains the same check, copied from the hashtab code. So apply the same
fix to hashtab, by moving the overflow check to before the roundup.
Fixes: daaf427c6ab3 ("bpf: fix arraymap NULL deref and missing overflow and zero size checks")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Message-ID: <20240307120340.99577-3-toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The devmap code allocates a number hash buckets equal to the next power
of two of the max_entries value provided when creating the map. When
rounding up to the next power of two, the 32-bit variable storing the
number of buckets can overflow, and the code checks for overflow by
checking if the truncated 32-bit value is equal to 0. However, on 32-bit
arches the rounding up itself can overflow mid-way through, because it
ends up doing a left-shift of 32 bits on an unsigned long value. If the
size of an unsigned long is four bytes, this is undefined behaviour, so
there is no guarantee that we'll end up with a nice and tidy 0-value at
the end.
Syzbot managed to turn this into a crash on arm32 by creating a
DEVMAP_HASH with max_entries > 0x80000000 and then trying to update it.
Fix this by moving the overflow check to before the rounding up
operation.
Fixes: 6f9d451ab1a3 ("xdp: Add devmap_hash map type for looking up devices by hashed index")
Link: https://lore.kernel.org/r/000000000000ed666a0611af6818@google.com
Reported-and-tested-by: syzbot+8cd36f6b65f3cafd400a@syzkaller.appspotmail.com
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Message-ID: <20240307120340.99577-2-toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
vmlinux BTF includes all kernel enums.
Add __PAGE_SIZE = PAGE_SIZE enum, so that bpf programs
that include vmlinux.h can easily access it.
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/r/20240307031228.42896-7-alexei.starovoitov@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Subsequent patches introduce bpf_arena that imposes special alignment
requirements on address selection.
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/r/20240307031228.42896-4-alexei.starovoitov@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Recognize 'void *p__map' kfunc argument as 'struct bpf_map *p__map'.
It allows kfunc to have 'void *' argument for maps, since bpf progs
will call them as:
struct {
__uint(type, BPF_MAP_TYPE_ARENA);
...
} arena SEC(".maps");
bpf_kfunc_with_map(... &arena ...);
Underneath libbpf will load CONST_PTR_TO_MAP into the register via ld_imm64
insn. If kfunc was defined with 'struct bpf_map *' it would pass the
verifier as well, but bpf prog would need to type cast the argument
(void *)&arena, which is not clean.
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/r/20240307031228.42896-3-alexei.starovoitov@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Recognize return of 'void *' from kfunc as returning unknown scalar.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/r/20240307031228.42896-2-alexei.starovoitov@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
net/core/page_pool_user.c
0b11b1c5c320 ("netdev: let netlink core handle -EMSGSIZE errors")
429679dcf7d9 ("page_pool: fix netlink dump stop/resume")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The intent is to allow libbpf to use SEC("?.struct_ops") to identify
struct_ops maps that are optional, e.g. like in the following BPF code:
SEC("?.struct_ops")
struct test_ops optional_map = { ... };
Which yields the following BTF:
...
[13] DATASEC '?.struct_ops' size=0 vlen=...
...
To load such BTF libbpf rewrites DATASEC name before load.
After this patch the rewrite won't be necessary.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240306104529.6453-15-eddyz87@gmail.com
|
|
When open code iterators, bpf_loop or may_goto are used the following two
states are equivalent and safe to prune the search:
cur state: fp-8_w=scalar(id=3,smin=umin=smin32=umin32=2,smax=umax=smax32=umax32=11,var_off=(0x0; 0xf))
old state: fp-8_rw=scalar(id=2,smin=umin=smin32=umin32=1,smax=umax=smax32=umax32=11,var_off=(0x0; 0xf))
In other words "exact" state match should ignore liveness and precision
marks, since open coded iterator logic didn't complete their propagation,
reg_old->type == NOT_INIT && reg_cur->type != NOT_INIT is also not safe to
prune while looping, but range_within logic that applies to scalars,
ptr_to_mem, map_value, pkt_ptr is safe to rely on.
Avoid doing such comparison when regular infinite loop detection logic is
used, otherwise bounded loop logic will declare such "infinite loop" as
false positive. Such example is in progs/verifier_loops1.c
not_an_inifinite_loop().
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Tested-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20240306031929.42666-3-alexei.starovoitov@gmail.com
|
|
Introduce may_goto instruction that from the verifier pov is similar to
open coded iterators bpf_for()/bpf_repeat() and bpf_loop() helper, but it
doesn't iterate any objects.
In assembly 'may_goto' is a nop most of the time until bpf runtime has to
terminate the program for whatever reason. In the current implementation
may_goto has a hidden counter, but other mechanisms can be used.
For programs written in C the later patch introduces 'cond_break' macro
that combines 'may_goto' with 'break' statement and has similar semantics:
cond_break is a nop until bpf runtime has to break out of this loop.
It can be used in any normal "for" or "while" loop, like
for (i = zero; i < cnt; cond_break, i++) {
The verifier recognizes that may_goto is used in the program, reserves
additional 8 bytes of stack, initializes them in subprog prologue, and
replaces may_goto instruction with:
aux_reg = *(u64 *)(fp - 40)
if aux_reg == 0 goto pc+off
aux_reg -= 1
*(u64 *)(fp - 40) = aux_reg
may_goto instruction can be used by LLVM to implement __builtin_memcpy,
__builtin_strcmp.
may_goto is not a full substitute for bpf_for() macro.
bpf_for() doesn't have induction variable that verifiers sees,
so 'i' in bpf_for(i, 0, 100) is seen as imprecise and bounded.
But when the code is written as:
for (i = 0; i < 100; cond_break, i++)
the verifier see 'i' as precise constant zero,
hence cond_break (aka may_goto) doesn't help to converge the loop.
A static or global variable can be used as a workaround:
static int zero = 0;
for (i = zero; i < 100; cond_break, i++) // works!
may_goto works well with arena pointers that don't need to be bounds
checked on access. Load/store from arena returns imprecise unbounded
scalar and loops with may_goto pass the verifier.
Reserve new opcode BPF_JMP | BPF_JCOND for may_goto insn.
JCOND stands for conditional pseudo jump.
Since goto_or_nop insn was proposed, it may use the same opcode.
may_goto vs goto_or_nop can be distinguished by src_reg:
code = BPF_JMP | BPF_JCOND
src_reg = 0 - may_goto
src_reg = 1 - goto_or_nop
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Tested-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20240306031929.42666-2-alexei.starovoitov@gmail.com
|
|
When running an XDP program that is attached to a cpumap entry, we don't
initialise the xdp_rxq_info data structure being used in the xdp_buff
that backs the XDP program invocation. Tobias noticed that this leads to
random values being returned as the xdp_md->rx_queue_index value for XDP
programs running in a cpumap.
This means we're basically returning the contents of the uninitialised
memory, which is bad. Fix this by zero-initialising the rxq data
structure before running the XDP program.
Fixes: 9216477449f3 ("bpf: cpumap: Add the possibility to attach an eBPF program to cpumap")
Reported-by: Tobias Böhm <tobias@aibor.de>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20240305213132.11955-1-toke@redhat.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
When comparing current and cached states verifier should consider
bpf_func_state->callback_depth. Current state cannot be pruned against
cached state, when current states has more iterations left compared to
cached state. Current state has more iterations left when it's
callback_depth is smaller.
Below is an example illustrating this bug, minimized from mailing list
discussion [0] (assume that BPF_F_TEST_STATE_FREQ is set).
The example is not a safe program: if loop_cb point (1) is followed by
loop_cb point (2), then division by zero is possible at point (4).
struct ctx {
__u64 a;
__u64 b;
__u64 c;
};
static void loop_cb(int i, struct ctx *ctx)
{
/* assume that generated code is "fallthrough-first":
* if ... == 1 goto
* if ... == 2 goto
* <default>
*/
switch (bpf_get_prandom_u32()) {
case 1: /* 1 */ ctx->a = 42; return 0; break;
case 2: /* 2 */ ctx->b = 42; return 0; break;
default: /* 3 */ ctx->c = 42; return 0; break;
}
}
SEC("tc")
__failure
__flag(BPF_F_TEST_STATE_FREQ)
int test(struct __sk_buff *skb)
{
struct ctx ctx = { 7, 7, 7 };
bpf_loop(2, loop_cb, &ctx, 0); /* 0 */
/* assume generated checks are in-order: .a first */
if (ctx.a == 42 && ctx.b == 42 && ctx.c == 7)
asm volatile("r0 /= 0;":::"r0"); /* 4 */
return 0;
}
Prior to this commit verifier built the following checkpoint tree for
this example:
.------------------------------------- Checkpoint / State name
| .-------------------------------- Code point number
| | .---------------------------- Stack state {ctx.a,ctx.b,ctx.c}
| | | .------------------- Callback depth in frame #0
v v v v
- (0) {7P,7P,7},depth=0
- (3) {7P,7P,7},depth=1
- (0) {7P,7P,42},depth=1
- (3) {7P,7,42},depth=2
- (0) {7P,7,42},depth=2 loop terminates because of depth limit
- (4) {7P,7,42},depth=0 predicted false, ctx.a marked precise
- (6) exit
(a) - (2) {7P,7,42},depth=2
- (0) {7P,42,42},depth=2 loop terminates because of depth limit
- (4) {7P,42,42},depth=0 predicted false, ctx.a marked precise
- (6) exit
(b) - (1) {7P,7P,42},depth=2
- (0) {42P,7P,42},depth=2 loop terminates because of depth limit
- (4) {42P,7P,42},depth=0 predicted false, ctx.{a,b} marked precise
- (6) exit
- (2) {7P,7,7},depth=1 considered safe, pruned using checkpoint (a)
(c) - (1) {7P,7P,7},depth=1 considered safe, pruned using checkpoint (b)
Here checkpoint (b) has callback_depth of 2, meaning that it would
never reach state {42,42,7}.
While checkpoint (c) has callback_depth of 1, and thus
could yet explore the state {42,42,7} if not pruned prematurely.
This commit makes forbids such premature pruning,
allowing verifier to explore states sub-tree starting at (c):
(c) - (1) {7,7,7P},depth=1
- (0) {42P,7,7P},depth=1
...
- (2) {42,7,7},depth=2
- (0) {42,42,7},depth=2 loop terminates because of depth limit
- (4) {42,42,7},depth=0 predicted true, ctx.{a,b,c} marked precise
- (5) division by zero
[0] https://lore.kernel.org/bpf/9b251840-7cb8-4d17-bd23-1fc8071d8eef@linux.dev/
Fixes: bb124da69c47 ("bpf: keep track of max number of bpf_loop callback iterations")
Suggested-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240222154121.6991-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The BPF struct_ops previously only allowed one page of trampolines.
Each function pointer of a struct_ops is implemented by a struct_ops
bpf program. Each struct_ops bpf program requires a trampoline.
The following selftest patch shows each page can hold a little more
than 20 trampolines.
While one page is more than enough for the tcp-cc usecase,
the sched_ext use case shows that one page is not always enough and hits
the one page limit. This patch overcomes the one page limit by allocating
another page when needed and it is limited to a total of
MAX_IMAGE_PAGES (8) pages which is more than enough for
reasonable usages.
The variable st_map->image has been changed to st_map->image_pages, and
its type has been changed to an array of pointers to pages.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240224223418.526631-3-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Perform all validations when updating values of struct_ops maps. Doing
validation in st_ops->reg() and st_ops->update() is not necessary anymore.
However, tcp_register_congestion_control() has been called in various
places. It still needs to do validations.
Cc: netdev@vger.kernel.org
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240224223418.526631-2-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
This is a cleanup patch, making code a bit more concise.
1) Use skb_network_offset(skb) in place of
(skb_network_header(skb) - skb->data)
2) Use -skb_network_offset(skb) in place of
(skb->data - skb_network_header(skb))
3) Use skb_transport_offset(skb) in place of
(skb_transport_header(skb) - skb->data)
4) Use skb_inner_transport_offset(skb) in place of
(skb_inner_transport_header(skb) - skb->data)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com> # for sfc
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-02-29
We've added 119 non-merge commits during the last 32 day(s) which contain
a total of 150 files changed, 3589 insertions(+), 995 deletions(-).
The main changes are:
1) Extend the BPF verifier to enable static subprog calls in spin lock
critical sections, from Kumar Kartikeya Dwivedi.
2) Fix confusing and incorrect inference of PTR_TO_CTX argument type
in BPF global subprogs, from Andrii Nakryiko.
3) Larger batch of riscv BPF JIT improvements and enabling inlining
of the bpf_kptr_xchg() for RV64, from Pu Lehui.
4) Allow skeleton users to change the values of the fields in struct_ops
maps at runtime, from Kui-Feng Lee.
5) Extend the verifier's capabilities of tracking scalars when they
are spilled to stack, especially when the spill or fill is narrowing,
from Maxim Mikityanskiy & Eduard Zingerman.
6) Various BPF selftest improvements to fix errors under gcc BPF backend,
from Jose E. Marchesi.
7) Avoid module loading failure when the module trying to register
a struct_ops has its BTF section stripped, from Geliang Tang.
8) Annotate all kfuncs in .BTF_ids section which eventually allows
for automatic kfunc prototype generation from bpftool, from Daniel Xu.
9) Several updates to the instruction-set.rst IETF standardization
document, from Dave Thaler.
10) Shrink the size of struct bpf_map resp. bpf_array,
from Alexei Starovoitov.
11) Initial small subset of BPF verifier prepwork for sleepable bpf_timer,
from Benjamin Tissoires.
12) Fix bpftool to be more portable to musl libc by using POSIX's
basename(), from Arnaldo Carvalho de Melo.
13) Add libbpf support to gcc in CORE macro definitions,
from Cupertino Miranda.
14) Remove a duplicate type check in perf_event_bpf_event,
from Florian Lehner.
15) Fix bpf_spin_{un,}lock BPF helpers to actually annotate them
with notrace correctly, from Yonghong Song.
16) Replace the deprecated bpf_lpm_trie_key 0-length array with flexible
array to fix build warnings, from Kees Cook.
17) Fix resolve_btfids cross-compilation to non host-native endianness,
from Viktor Malik.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (119 commits)
selftests/bpf: Test if shadow types work correctly.
bpftool: Add an example for struct_ops map and shadow type.
bpftool: Generated shadow variables for struct_ops maps.
libbpf: Convert st_ops->data to shadow type.
libbpf: Set btf_value_type_id of struct bpf_map for struct_ops.
bpf: Replace bpf_lpm_trie_key 0-length array with flexible array
bpf, arm64: use bpf_prog_pack for memory management
arm64: patching: implement text_poke API
bpf, arm64: support exceptions
arm64: stacktrace: Implement arch_bpf_stack_walk() for the BPF JIT
bpf: add is_async_callback_calling_insn() helper
bpf: introduce in_sleepable() helper
bpf: allow more maps in sleepable bpf programs
selftests/bpf: Test case for lacking CFI stub functions.
bpf: Check cfi_stubs before registering a struct_ops type.
bpf: Clarify batch lookup/lookup_and_delete semantics
bpf, docs: specify which BPF_ABS and BPF_IND fields were zero
bpf, docs: Fix typos in instruction-set.rst
selftests/bpf: update tcp_custom_syncookie to use scalar packet offset
bpf: Shrink size of struct bpf_map/bpf_array.
...
====================
Link: https://lore.kernel.org/r/20240301001625.8800-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace deprecated 0-length array in struct bpf_lpm_trie_key with
flexible array. Found with GCC 13:
../kernel/bpf/lpm_trie.c:207:51: warning: array subscript i is outside array bounds of 'const __u8[0]' {aka 'const unsigned char[]'} [-Warray-bounds=]
207 | *(__be16 *)&key->data[i]);
| ^~~~~~~~~~~~~
../include/uapi/linux/swab.h:102:54: note: in definition of macro '__swab16'
102 | #define __swab16(x) (__u16)__builtin_bswap16((__u16)(x))
| ^
../include/linux/byteorder/generic.h:97:21: note: in expansion of macro '__be16_to_cpu'
97 | #define be16_to_cpu __be16_to_cpu
| ^~~~~~~~~~~~~
../kernel/bpf/lpm_trie.c:206:28: note: in expansion of macro 'be16_to_cpu'
206 | u16 diff = be16_to_cpu(*(__be16 *)&node->data[i]
^
| ^~~~~~~~~~~
In file included from ../include/linux/bpf.h:7:
../include/uapi/linux/bpf.h:82:17: note: while referencing 'data'
82 | __u8 data[0]; /* Arbitrary size */
| ^~~~
And found at run-time under CONFIG_FORTIFY_SOURCE:
UBSAN: array-index-out-of-bounds in kernel/bpf/lpm_trie.c:218:49
index 0 is out of range for type '__u8 [*]'
Changing struct bpf_lpm_trie_key is difficult since has been used by
userspace. For example, in Cilium:
struct egress_gw_policy_key {
struct bpf_lpm_trie_key lpm_key;
__u32 saddr;
__u32 daddr;
};
While direct references to the "data" member haven't been found, there
are static initializers what include the final member. For example,
the "{}" here:
struct egress_gw_policy_key in_key = {
.lpm_key = { 32 + 24, {} },
.saddr = CLIENT_IP,
.daddr = EXTERNAL_SVC_IP & 0Xffffff,
};
To avoid the build time and run time warnings seen with a 0-sized
trailing array for struct bpf_lpm_trie_key, introduce a new struct
that correctly uses a flexible array for the trailing bytes,
struct bpf_lpm_trie_key_u8. As part of this, include the "header"
portion (which is just the "prefixlen" member), so it can be used
by anything building a bpf_lpr_trie_key that has trailing members that
aren't a u8 flexible array (like the self-test[1]), which is named
struct bpf_lpm_trie_key_hdr.
Unfortunately, C++ refuses to parse the __struct_group() helper, so
it is not possible to define struct bpf_lpm_trie_key_hdr directly in
struct bpf_lpm_trie_key_u8, so we must open-code the union directly.
Adjust the kernel code to use struct bpf_lpm_trie_key_u8 through-out,
and for the selftest to use struct bpf_lpm_trie_key_hdr. Add a comment
to the UAPI header directing folks to the two new options.
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Closes: https://paste.debian.net/hidden/ca500597/
Link: https://lore.kernel.org/all/202206281009.4332AA33@keescook/ [1]
Link: https://lore.kernel.org/bpf/20240222155612.it.533-kees@kernel.org
|
|
Currently we have a special case for BPF_FUNC_timer_set_callback,
let's introduce a helper we can extend for the kfunc that will come in
a later patch
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://lore.kernel.org/r/20240221-hid-bpf-sleepable-v3-3-1fb378ca6301@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
No code change, but it'll allow to have only one place to change
everything when we add in_sleepable in cur_state.
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://lore.kernel.org/r/20240221-hid-bpf-sleepable-v3-2-1fb378ca6301@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
These 2 maps types are required for HID-BPF when a user wants to do
IO with a device from a sleepable tracing point.
Allowing BPF_MAP_TYPE_QUEUE (and therefore BPF_MAP_TYPE_STACK) allows
for a BPF program to prepare from an IRQ the list of HID commands to send
back to the device and then these commands can be retrieved from the
sleepable trace point.
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://lore.kernel.org/r/20240221-hid-bpf-sleepable-v3-1-1fb378ca6301@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
net/ipv4/udp.c
f796feabb9f5 ("udp: add local "peek offset enabled" flag")
56667da7399e ("net: implement lockless setsockopt(SO_PEEK_OFF)")
Adjacent changes:
net/unix/garbage.c
aa82ac51d633 ("af_unix: Drop oob_skb ref before purging queue in GC.")
11498715f266 ("af_unix: Remove io_uring code for GC.")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Recently, st_ops->cfi_stubs was introduced. However, the upcoming new
struct_ops support (e.g. sched_ext) is not aware of this and does not
provide its own cfi_stubs. The kernel ends up NULL dereferencing the
st_ops->cfi_stubs.
Considering struct_ops supports kernel module now, this NULL check
is necessary. This patch is to reject struct_ops registration
that does not provide a cfi_stubs.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240222021105.1180475-2-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Failure to initialize it->pos, coupled with the presence of an invalid
value in the flags variable, can lead to it->pos referencing an invalid
task, potentially resulting in a kernel panic. To mitigate this risk, it's
crucial to ensure proper initialization of it->pos to NULL.
Fixes: ac8148d957f5 ("bpf: bpf_iter_task_next: use next_task(kit->task) rather than next_task(kit->pos)")
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/bpf/20240217114152.1623-2-laoar.shao@gmail.com
|
|
The following race is possible between bpf_timer_cancel_and_free
and bpf_timer_cancel. It will lead a UAF on the timer->timer.
bpf_timer_cancel();
spin_lock();
t = timer->time;
spin_unlock();
bpf_timer_cancel_and_free();
spin_lock();
t = timer->timer;
timer->timer = NULL;
spin_unlock();
hrtimer_cancel(&t->timer);
kfree(t);
/* UAF on t */
hrtimer_cancel(&t->timer);
In bpf_timer_cancel_and_free, this patch frees the timer->timer
after a rcu grace period. This requires a rcu_head addition
to the "struct bpf_hrtimer". Another kfree(t) happens in bpf_timer_init,
this does not need a kfree_rcu because it is still under the
spin_lock and timer->timer has not been visible by others yet.
In bpf_timer_cancel, rcu_read_lock() is added because this helper
can be used in a non rcu critical section context (e.g. from
a sleepable bpf prog). Other timer->timer usages in helpers.c
have been audited, bpf_timer_cancel() is the only place where
timer->timer is used outside of the spin_lock.
Another solution considered is to mark a t->flag in bpf_timer_cancel
and clear it after hrtimer_cancel() is done. In bpf_timer_cancel_and_free,
it busy waits for the flag to be cleared before kfree(t). This patch
goes with a straight forward solution and frees timer->timer after
a rcu grace period.
Fixes: b00628b1c7d5 ("bpf: Introduce bpf timers.")
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/bpf/20240215211218.990808-1-martin.lau@linux.dev
|
