summaryrefslogtreecommitdiff
path: root/kernel/cpu.c
AgeCommit message (Collapse)AuthorFilesLines
2021-01-07cpu/hotplug: Add lockdep_is_cpus_held()Frederic Weisbecker1-0/+7
This commit adds a lockdep_is_cpus_held() function to verify that the proper locks are held and that various operations are running in the correct context. Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Lai Jiangshan <jiangshanlai@gmail.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Neeraj Upadhyay <neeraju@codeaurora.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2020-12-15Merge tag 'sched-core-2020-12-14' of ↵Linus Torvalds1-1/+8
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Thomas Gleixner: - migrate_disable/enable() support which originates from the RT tree and is now a prerequisite for the new preemptible kmap_local() API which aims to replace kmap_atomic(). - A fair amount of topology and NUMA related improvements - Improvements for the frequency invariant calculations - Enhanced robustness for the global CPU priority tracking and decision making - The usual small fixes and enhancements all over the place * tag 'sched-core-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (61 commits) sched/fair: Trivial correction of the newidle_balance() comment sched/fair: Clear SMT siblings after determining the core is not idle sched: Fix kernel-doc markup x86: Print ratio freq_max/freq_base used in frequency invariance calculations x86, sched: Use midpoint of max_boost and max_P for frequency invariance on AMD EPYC x86, sched: Calculate frequency invariance for AMD systems irq_work: Optimize irq_work_single() smp: Cleanup smp_call_function*() irq_work: Cleanup sched: Limit the amount of NUMA imbalance that can exist at fork time sched/numa: Allow a floating imbalance between NUMA nodes sched: Avoid unnecessary calculation of load imbalance at clone time sched/numa: Rename nr_running and break out the magic number sched: Make migrate_disable/enable() independent of RT sched/topology: Condition EAS enablement on FIE support arm64: Rebuild sched domains on invariance status changes sched/topology,schedutil: Wrap sched domains rebuild sched/uclamp: Allow to reset a task uclamp constraint value sched/core: Fix typos in comments Documentation: scheduler: fix information on arch SD flags, sched_domain and sched_debug ...
2020-11-26kernel/cpu: add arch override for clear_tasks_mm_cpumask() mm handlingNicholas Piggin1-1/+5
powerpc/64s keeps a counter in the mm which counts bits set in mm_cpumask as well as other things. This means it can't use generic code to clear bits out of the mask and doesn't adjust the arch specific counter. Add an arch override that allows powerpc/64s to use clear_tasks_mm_cpumask(). Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201126102530.691335-4-npiggin@gmail.com
2020-11-10sched/hotplug: Consolidate task migration on CPU unplugThomas Gleixner1-1/+8
With the new mechanism which kicks tasks off the outgoing CPU at the end of schedule() the situation on an outgoing CPU right before the stopper thread brings it down completely is: - All user tasks and all unbound kernel threads have either been migrated away or are not running and the next wakeup will move them to a online CPU. - All per CPU kernel threads, except cpu hotplug thread and the stopper thread have either been unbound or parked by the responsible CPU hotplug callback. That means that at the last step before the stopper thread is invoked the cpu hotplug thread is the last legitimate running task on the outgoing CPU. Add a final wait step right before the stopper thread is kicked which ensures that any still running tasks on the way to park or on the way to kick themself of the CPU are either sleeping or gone. This allows to remove the migrate_tasks() crutch in sched_cpu_dying(). If sched_cpu_dying() detects that there is still another running task aside of the stopper thread then it will explode with the appropriate fireworks. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com> Link: https://lkml.kernel.org/r/20201023102346.547163969@infradead.org
2020-06-03Merge tag 'sched-core-2020-06-02' of ↵Linus Torvalds1-1/+17
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: "The changes in this cycle are: - Optimize the task wakeup CPU selection logic, to improve scalability and reduce wakeup latency spikes - PELT enhancements - CFS bandwidth handling fixes - Optimize the wakeup path by remove rq->wake_list and replacing it with ->ttwu_pending - Optimize IPI cross-calls by making flush_smp_call_function_queue() process sync callbacks first. - Misc fixes and enhancements" * tag 'sched-core-2020-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits) irq_work: Define irq_work_single() on !CONFIG_IRQ_WORK too sched/headers: Split out open-coded prototypes into kernel/sched/smp.h sched: Replace rq::wake_list sched: Add rq::ttwu_pending irq_work, smp: Allow irq_work on call_single_queue smp: Optimize send_call_function_single_ipi() smp: Move irq_work_run() out of flush_smp_call_function_queue() smp: Optimize flush_smp_call_function_queue() sched: Fix smp_call_function_single_async() usage for ILB sched/core: Offload wakee task activation if it the wakee is descheduling sched/core: Optimize ttwu() spinning on p->on_cpu sched: Defend cfs and rt bandwidth quota against overflow sched/cpuacct: Fix charge cpuacct.usage_sys sched/fair: Replace zero-length array with flexible-array sched/pelt: Sync util/runnable_sum with PELT window when propagating sched/cpuacct: Use __this_cpu_add() instead of this_cpu_ptr() sched/fair: Optimize enqueue_task_fair() sched: Make scheduler_ipi inline sched: Clean up scheduler_ipi() sched/core: Simplify sched_init() ...
2020-05-07cpu/hotplug: Remove __freeze_secondary_cpus()Qais Yousef1-2/+2
The refactored function is no longer required as the codepaths that call freeze_secondary_cpus() are all suspend/resume related now. Signed-off-by: Qais Yousef <qais.yousef@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Link: https://lkml.kernel.org/r/20200430114004.17477-2-qais.yousef@arm.com
2020-05-07cpu/hotplug: Remove disable_nonboot_cpus()Qais Yousef1-7/+7
The single user could have called freeze_secondary_cpus() directly. Since this function was a source of confusion, remove it as it's just a pointless wrapper. While at it, rename enable_nonboot_cpus() to thaw_secondary_cpus() to preserve the naming symmetry. Done automatically via: git grep -l enable_nonboot_cpus | xargs sed -i 's/enable_nonboot_cpus/thaw_secondary_cpus/g' Signed-off-by: Qais Yousef <qais.yousef@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Link: https://lkml.kernel.org/r/20200430114004.17477-1-qais.yousef@arm.com
2020-04-30sched/core: Fix illegal RCU from offline CPUsPeter Zijlstra1-1/+17
In the CPU-offline process, it calls mmdrop() after idle entry and the subsequent call to cpuhp_report_idle_dead(). Once execution passes the call to rcu_report_dead(), RCU is ignoring the CPU, which results in lockdep complaining when mmdrop() uses RCU from either memcg or debugobjects below. Fix it by cleaning up the active_mm state from BP instead. Every arch which has CONFIG_HOTPLUG_CPU should have already called idle_task_exit() from AP. The only exception is parisc because it switches them to &init_mm unconditionally (see smp_boot_one_cpu() and smp_cpu_init()), but the patch will still work there because it calls mmgrab(&init_mm) in smp_cpu_init() and then should call mmdrop(&init_mm) in finish_cpu(). WARNING: suspicious RCU usage ----------------------------- kernel/workqueue.c:710 RCU or wq_pool_mutex should be held! other info that might help us debug this: RCU used illegally from offline CPU! Call Trace: dump_stack+0xf4/0x164 (unreliable) lockdep_rcu_suspicious+0x140/0x164 get_work_pool+0x110/0x150 __queue_work+0x1bc/0xca0 queue_work_on+0x114/0x120 css_release+0x9c/0xc0 percpu_ref_put_many+0x204/0x230 free_pcp_prepare+0x264/0x570 free_unref_page+0x38/0xf0 __mmdrop+0x21c/0x2c0 idle_task_exit+0x170/0x1b0 pnv_smp_cpu_kill_self+0x38/0x2e0 cpu_die+0x48/0x64 arch_cpu_idle_dead+0x30/0x50 do_idle+0x2f4/0x470 cpu_startup_entry+0x38/0x40 start_secondary+0x7a8/0xa80 start_secondary_resume+0x10/0x14 Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Link: https://lkml.kernel.org/r/20200401214033.8448-1-cai@lca.pw
2020-04-27cpu/hotplug: Fix a typo in comment "broadacasted"->"broadcasted"Ethon Paul1-1/+1
Signed-off-by: Ethon Paul <ethp@qq.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200417164008.6541-1-ethp@qq.com
2020-03-31Merge tag 'smp-core-2020-03-30' of ↵Linus Torvalds1-14/+129
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core SMP updates from Thomas Gleixner: "CPU (hotplug) updates: - Support for locked CSD objects in smp_call_function_single_async() which allows to simplify callsites in the scheduler core and MIPS - Treewide consolidation of CPU hotplug functions which ensures the consistency between the sysfs interface and kernel state. The low level functions cpu_up/down() are now confined to the core code and not longer accessible from random code" * tag 'smp-core-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits) cpu/hotplug: Ignore pm_wakeup_pending() for disable_nonboot_cpus() cpu/hotplug: Hide cpu_up/down() cpu/hotplug: Move bringup of secondary CPUs out of smp_init() torture: Replace cpu_up/down() with add/remove_cpu() firmware: psci: Replace cpu_up/down() with add/remove_cpu() xen/cpuhotplug: Replace cpu_up/down() with device_online/offline() parisc: Replace cpu_up/down() with add/remove_cpu() sparc: Replace cpu_up/down() with add/remove_cpu() powerpc: Replace cpu_up/down() with add/remove_cpu() x86/smp: Replace cpu_up/down() with add/remove_cpu() arm64: hibernate: Use bringup_hibernate_cpu() cpu/hotplug: Provide bringup_hibernate_cpu() arm64: Use reboot_cpu instead of hardconding it to 0 arm64: Don't use disable_nonboot_cpus() ARM: Use reboot_cpu instead of hardcoding it to 0 ARM: Don't use disable_nonboot_cpus() ia64: Replace cpu_down() with smp_shutdown_nonboot_cpus() cpu/hotplug: Create a new function to shutdown nonboot cpus cpu/hotplug: Add new {add,remove}_cpu() functions sched/core: Remove rq.hrtick_csd_pending ...
2020-03-28cpu/hotplug: Ignore pm_wakeup_pending() for disable_nonboot_cpus()Thomas Gleixner1-2/+2
A recent change to freeze_secondary_cpus() which added an early abort if a wakeup is pending missed the fact that the function is also invoked for shutdown, reboot and kexec via disable_nonboot_cpus(). In case of disable_nonboot_cpus() the wakeup event needs to be ignored as the purpose is to terminate the currently running kernel. Add a 'suspend' argument which is only set when the freeze is in context of a suspend operation. If not set then an eventually pending wakeup event is ignored. Fixes: a66d955e910a ("cpu/hotplug: Abort disabling secondary CPUs if wakeup is pending") Reported-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Pavankumar Kondeti <pkondeti@codeaurora.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/874kuaxdiz.fsf@nanos.tec.linutronix.de
2020-03-25cpu/hotplug: Hide cpu_up/down()Qais Yousef1-14/+28
Use separate functions for the device core to bring a CPU up and down. Users outside the device core must use add/remove_cpu() which will take care of extra housekeeping work like keeping sysfs in sync. Make cpu_up/down() static and replace the extra layer of indirection. [ tglx: Removed the extra wrapper functions and adjusted function names ] Signed-off-by: Qais Yousef <qais.yousef@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200323135110.30522-18-qais.yousef@arm.com
2020-03-25cpu/hotplug: Move bringup of secondary CPUs out of smp_init()Qais Yousef1-0/+12
This is the last direct user of cpu_up() before it can become an internal implementation detail of the cpu subsystem. Signed-off-by: Qais Yousef <qais.yousef@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200323135110.30522-17-qais.yousef@arm.com
2020-03-25cpu/hotplug: Provide bringup_hibernate_cpu()Qais Yousef1-0/+23
arm64 uses cpu_up() in the resume from hibernation code to ensure that the CPU on which the system hibernated is online. Provide a core function for this. [ tglx: Split out from the combo arm64 patch ] Signed-off-by: Qais Yousef <qais.yousef@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lkml.kernel.org/r/20200323135110.30522-9-qais.yousef@arm.com
2020-03-25cpu/hotplug: Create a new function to shutdown nonboot cpusQais Yousef1-0/+42
This function will be used later in machine_shutdown() for some architectures. disable_nonboot_cpus() is not safe to use when doing machine_down(), because it relies on freeze_secondary_cpus() which in turn is a suspend/resume related freeze and could abort if the logic detects any pending activities that can prevent finishing the offlining process. Signed-off-by: Qais Yousef <qais.yousef@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200323135110.30522-3-qais.yousef@arm.com
2020-03-25cpu/hotplug: Add new {add,remove}_cpu() functionsQais Yousef1-0/+24
The new functions use device_{online,offline}() which are userspace safe. This is in preparation to move cpu_{up, down} kernel users to use a safer interface that is not racy with userspace. Suggested-by: "Paul E. McKenney" <paulmck@kernel.org> Signed-off-by: Qais Yousef <qais.yousef@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Paul E. McKenney <paulmck@kernel.org> Link: https://lkml.kernel.org/r/20200323135110.30522-2-qais.yousef@arm.com
2020-02-11locking/percpu-rwsem, lockdep: Make percpu-rwsem use its own lockdep_mapPeter Zijlstra1-2/+2
As preparation for replacing the embedded rwsem, give percpu-rwsem its own lockdep_map. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Davidlohr Bueso <dbueso@suse.de> Acked-by: Will Deacon <will@kernel.org> Acked-by: Waiman Long <longman@redhat.com> Tested-by: Juri Lelli <juri.lelli@redhat.com> Link: https://lkml.kernel.org/r/20200131151539.927625541@infradead.org
2020-01-28Merge branch 'sched-core-for-linus' of ↵Linus Torvalds1-4/+9
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: "These were the main changes in this cycle: - More -rt motivated separation of CONFIG_PREEMPT and CONFIG_PREEMPTION. - Add more low level scheduling topology sanity checks and warnings to filter out nonsensical topologies that break scheduling. - Extend uclamp constraints to influence wakeup CPU placement - Make the RT scheduler more aware of asymmetric topologies and CPU capacities, via uclamp metrics, if CONFIG_UCLAMP_TASK=y - Make idle CPU selection more consistent - Various fixes, smaller cleanups, updates and enhancements - please see the git log for details" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (58 commits) sched/fair: Define sched_idle_cpu() only for SMP configurations sched/topology: Assert non-NUMA topology masks don't (partially) overlap idle: fix spelling mistake "iterrupts" -> "interrupts" sched/fair: Remove redundant call to cpufreq_update_util() sched/psi: create /proc/pressure and /proc/pressure/{io|memory|cpu} only when psi enabled sched/fair: Fix sgc->{min,max}_capacity calculation for SD_OVERLAP sched/fair: calculate delta runnable load only when it's needed sched/cputime: move rq parameter in irqtime_account_process_tick stop_machine: Make stop_cpus() static sched/debug: Reset watchdog on all CPUs while processing sysrq-t sched/core: Fix size of rq::uclamp initialization sched/uclamp: Fix a bug in propagating uclamp value in new cgroups sched/fair: Load balance aggressively for SCHED_IDLE CPUs sched/fair : Improve update_sd_pick_busiest for spare capacity case watchdog: Remove soft_lockup_hrtimer_cnt and related code sched/rt: Make RT capacity-aware sched/fair: Make EAS wakeup placement consider uclamp restrictions sched/fair: Make task_fits_capacity() consider uclamp restrictions sched/uclamp: Rename uclamp_util_with() into uclamp_rq_util_with() sched/uclamp: Make uclamp util helpers use and return UL values ...
2020-01-09cpu/SMT: Fix x86 link error without CONFIG_SYSFSArnd Bergmann1-71/+72
When CONFIG_SYSFS is disabled, but CONFIG_HOTPLUG_SMT is enabled, the kernel fails to link: arch/x86/power/cpu.o: In function `hibernate_resume_nonboot_cpu_disable': (.text+0x38d): undefined reference to `cpuhp_smt_enable' arch/x86/power/hibernate.o: In function `arch_resume_nosmt': hibernate.c:(.text+0x291): undefined reference to `cpuhp_smt_enable' hibernate.c:(.text+0x29c): undefined reference to `cpuhp_smt_disable' Move the exported functions out of the #ifdef section into its own with the correct conditions. The patch that caused this is marked for stable backports, so this one may need to be backported as well. Fixes: ec527c318036 ("x86/power: Fix 'nosmt' vs hibernation triple fault during resume") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Jiri Kosina <jkosina@suse.cz> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191210195614.786555-1-arnd@arndb.de
2019-12-17cpu/hotplug, stop_machine: Fix stop_machine vs hotplug orderPeter Zijlstra1-4/+9
Paul reported a very sporadic, rcutorture induced, workqueue failure. When the planets align, the workqueue rescuer's self-migrate fails and then triggers a WARN for running a work on the wrong CPU. Tejun then figured that set_cpus_allowed_ptr()'s stop_one_cpu() call could be ignored! When stopper->enabled is false, stop_machine will insta complete the work, without actually doing the work. Worse, it will not WARN about this (we really should fix this). It turns out there is a small window where a freshly online'ed CPU is marked 'online' but doesn't yet have the stopper task running: BP AP bringup_cpu() __cpu_up(cpu, idle) --> start_secondary() ... cpu_startup_entry() bringup_wait_for_ap() wait_for_ap_thread() <-- cpuhp_online_idle() while (1) do_idle() ... available to run kthreads ... stop_machine_unpark() stopper->enable = true; Close this by moving the stop_machine_unpark() into cpuhp_online_idle(), such that the stopper thread is ready before we start the idle loop and schedule. Reported-by: "Paul E. McKenney" <paulmck@kernel.org> Debugged-by: Tejun Heo <tj@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: "Paul E. McKenney" <paulmck@kernel.org>
2019-11-27Merge branch 'locking-core-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking updates from Ingo Molnar: "The main changes in this cycle were: - A comprehensive rewrite of the robust/PI futex code's exit handling to fix various exit races. (Thomas Gleixner et al) - Rework the generic REFCOUNT_FULL implementation using atomic_fetch_* operations so that the performance impact of the cmpxchg() loops is mitigated for common refcount operations. With these performance improvements the generic implementation of refcount_t should be good enough for everybody - and this got confirmed by performance testing, so remove ARCH_HAS_REFCOUNT and REFCOUNT_FULL entirely, leaving the generic implementation enabled unconditionally. (Will Deacon) - Other misc changes, fixes, cleanups" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits) lkdtm: Remove references to CONFIG_REFCOUNT_FULL locking/refcount: Remove unused 'refcount_error_report()' function locking/refcount: Consolidate implementations of refcount_t locking/refcount: Consolidate REFCOUNT_{MAX,SATURATED} definitions locking/refcount: Move saturation warnings out of line locking/refcount: Improve performance of generic REFCOUNT_FULL code locking/refcount: Move the bulk of the REFCOUNT_FULL implementation into the <linux/refcount.h> header locking/refcount: Remove unused refcount_*_checked() variants locking/refcount: Ensure integer operands are treated as signed locking/refcount: Define constants for saturation and max refcount values futex: Prevent exit livelock futex: Provide distinct return value when owner is exiting futex: Add mutex around futex exit futex: Provide state handling for exec() as well futex: Sanitize exit state handling futex: Mark the begin of futex exit explicitly futex: Set task::futex_state to DEAD right after handling futex exit futex: Split futex_mm_release() for exit/exec exit/exec: Seperate mm_release() futex: Replace PF_EXITPIDONE with a state ...
2019-11-04cpu/speculation: Uninline and export CPU mitigations helpersTyler Hicks1-1/+26
A kernel module may need to check the value of the "mitigations=" kernel command line parameter as part of its setup when the module needs to perform software mitigations for a CPU flaw. Uninline and export the helper functions surrounding the cpu_mitigations enum to allow for their usage from a module. Lastly, privatize the enum and cpu_mitigations variable since the value of cpu_mitigations can be checked with the exported helper functions. Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2019-10-09locking/lockdep: Remove unused @nested argument from lock_release()Qian Cai1-1/+1
Since the following commit: b4adfe8e05f1 ("locking/lockdep: Remove unused argument in __lock_release") @nested is no longer used in lock_release(), so remove it from all lock_release() calls and friends. Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Will Deacon <will@kernel.org> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: airlied@linux.ie Cc: akpm@linux-foundation.org Cc: alexander.levin@microsoft.com Cc: daniel@iogearbox.net Cc: davem@davemloft.net Cc: dri-devel@lists.freedesktop.org Cc: duyuyang@gmail.com Cc: gregkh@linuxfoundation.org Cc: hannes@cmpxchg.org Cc: intel-gfx@lists.freedesktop.org Cc: jack@suse.com Cc: jlbec@evilplan.or Cc: joonas.lahtinen@linux.intel.com Cc: joseph.qi@linux.alibaba.com Cc: jslaby@suse.com Cc: juri.lelli@redhat.com Cc: maarten.lankhorst@linux.intel.com Cc: mark@fasheh.com Cc: mhocko@kernel.org Cc: mripard@kernel.org Cc: ocfs2-devel@oss.oracle.com Cc: rodrigo.vivi@intel.com Cc: sean@poorly.run Cc: st@kernel.org Cc: tj@kernel.org Cc: tytso@mit.edu Cc: vdavydov.dev@gmail.com Cc: vincent.guittot@linaro.org Cc: viro@zeniv.linux.org.uk Link: https://lkml.kernel.org/r/1568909380-32199-1-git-send-email-cai@lca.pw Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-09-24cpu/SMT: create and export cpu_smt_possible()Vitaly Kuznetsov1-2/+9
KVM needs to know if SMT is theoretically possible, this means it is supported and not forcefully disabled ('nosmt=force'). Create and export cpu_smt_possible() answering this question. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-25cpu/hotplug: Cache number of online CPUsThomas Gleixner1-0/+24
Re-evaluating the bitmap wheight of the online cpus bitmap in every invocation of num_online_cpus() over and over is a pretty useless exercise. Especially when num_online_cpus() is used in code paths like the IPI delivery of x86 or the membarrier code. Cache the number of online CPUs in the core and just return the cached variable. The accessor function provides only a snapshot when used without protection against concurrent CPU hotplug. The storage needs to use an atomic_t because the kexec and reboot code (ab)use set_cpu_online() in their 'shutdown' handlers without any form of serialization as pointed out by Mathieu. Regular CPU hotplug usage is properly serialized. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1907091622590.1634@nanos.tec.linutronix.de
2019-07-25smp/hotplug: Track booted once CPUs in a cpumaskThomas Gleixner1-4/+7
The booted once information which is required to deal with the MCE broadcast issue on X86 correctly is stored in the per cpu hotplug state, which is perfectly fine for the intended purpose. X86 needs that information for supporting NMI broadcasting via shortcuts, but retrieving it from per cpu data is cumbersome. Move it to a cpumask so the information can be checked against the cpu_present_mask quickly. No functional change intended. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20190722105219.818822855@linutronix.de
2019-07-08Merge branch 'smp-hotplug-for-linus' of ↵Linus Torvalds1-1/+8
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull SMP/hotplug updates from Thomas Gleixner: "A small set of updates for SMP and CPU hotplug: - Abort disabling secondary CPUs in the freezer when a wakeup is pending instead of evaluating it only after all CPUs have been offlined. - Remove the shared annotation for the strict per CPU cfd_data in the smp function call core code. - Remove the return values of smp_call_function() and on_each_cpu() as they are unconditionally 0. Fixup the few callers which actually bothered to check the return value" * 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: smp: Remove smp_call_function() and on_each_cpu() return values smp: Do not mark call_function_data as shared cpu/hotplug: Abort disabling secondary CPUs if wakeup is pending cpu/hotplug: Fix notify_cpu_starting() reference in bringup_wait_for_ap()
2019-06-27cpu/hotplug: Fix out-of-bounds read when setting fail stateEiichi Tsukata1-0/+3
Setting invalid value to /sys/devices/system/cpu/cpuX/hotplug/fail can control `struct cpuhp_step *sp` address, results in the following global-out-of-bounds read. Reproducer: # echo -2 > /sys/devices/system/cpu/cpu0/hotplug/fail KASAN report: BUG: KASAN: global-out-of-bounds in write_cpuhp_fail+0x2cd/0x2e0 Read of size 8 at addr ffffffff89734438 by task bash/1941 CPU: 0 PID: 1941 Comm: bash Not tainted 5.2.0-rc6+ #31 Call Trace: write_cpuhp_fail+0x2cd/0x2e0 dev_attr_store+0x58/0x80 sysfs_kf_write+0x13d/0x1a0 kernfs_fop_write+0x2bc/0x460 vfs_write+0x1e1/0x560 ksys_write+0x126/0x250 do_syscall_64+0xc1/0x390 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f05e4f4c970 The buggy address belongs to the variable: cpu_hotplug_lock+0x98/0xa0 Memory state around the buggy address: ffffffff89734300: fa fa fa fa 00 00 00 00 00 00 00 00 00 00 00 00 ffffffff89734380: fa fa fa fa 00 00 00 00 00 00 00 00 00 00 00 00 >ffffffff89734400: 00 00 00 00 fa fa fa fa 00 00 00 00 fa fa fa fa ^ ffffffff89734480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffffffff89734500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Add a sanity check for the value written from user space. Fixes: 1db49484f21ed ("smp/hotplug: Hotplug state fail injection") Signed-off-by: Eiichi Tsukata <devel@etsukata.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: peterz@infradead.org Link: https://lkml.kernel.org/r/20190627024732.31672-1-devel@etsukata.com
2019-06-26cpu/speculation: Warn on unsupported mitigations= parameterGeert Uytterhoeven1-0/+3
Currently, if the user specifies an unsupported mitigation strategy on the kernel command line, it will be ignored silently. The code will fall back to the default strategy, possibly leaving the system more vulnerable than expected. This may happen due to e.g. a simple typo, or, for a stable kernel release, because not all mitigation strategies have been backported. Inform the user by printing a message. Fixes: 98af8452945c5565 ("cpu/speculation: Add 'mitigations=' cmdline option") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190516070935.22546-1-geert@linux-m68k.org
2019-06-12cpu/hotplug: Abort disabling secondary CPUs if wakeup is pendingPavankumar Kondeti1-0/+7
When "deep" suspend is enabled, all CPUs except the primary CPU are frozen via CPU hotplug one by one. After all secondary CPUs are unplugged the wakeup pending condition is evaluated and if pending the suspend operation is aborted and the secondary CPUs are brought up again. CPU hotplug is a slow operation, so it makes sense to check for wakeup pending in the freezer loop before bringing down the next CPU. This improves the system suspend abort latency significantly. [ tglx: Massaged changelog and improved printk message ] Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: iri Kosina <jkosina@suse.cz> Cc: Mukesh Ojha <mojha@codeaurora.org> Cc: linux-pm@vger.kernel.org Link: https://lkml.kernel.org/r/1559536263-16472-1-git-send-email-pkondeti@codeaurora.org
2019-06-03x86/power: Fix 'nosmt' vs hibernation triple fault during resumeJiri Kosina1-2/+2
As explained in 0cc3cd21657b ("cpu/hotplug: Boot HT siblings at least once") we always, no matter what, have to bring up x86 HT siblings during boot at least once in order to avoid first MCE bringing the system to its knees. That means that whenever 'nosmt' is supplied on the kernel command-line, all the HT siblings are as a result sitting in mwait or cpudile after going through the online-offline cycle at least once. This causes a serious issue though when a kernel, which saw 'nosmt' on its commandline, is going to perform resume from hibernation: if the resume from the hibernated image is successful, cr3 is flipped in order to point to the address space of the kernel that is being resumed, which in turn means that all the HT siblings are all of a sudden mwaiting on address which is no longer valid. That results in triple fault shortly after cr3 is switched, and machine reboots. Fix this by always waking up all the SMT siblings before initiating the 'restore from hibernation' process; this guarantees that all the HT siblings will be properly carried over to the resumed kernel waiting in resume_play_dead(), and acted upon accordingly afterwards, based on the target kernel configuration. Symmetricaly, the resumed kernel has to push the SMT siblings to mwait again in case it has SMT disabled; this means it has to online all the siblings when resuming (so that they come out of hlt) and offline them again to let them reach mwait. Cc: 4.19+ <stable@vger.kernel.org> # v4.19+ Debugged-by: Thomas Gleixner <tglx@linutronix.de> Fixes: 0cc3cd21657b ("cpu/hotplug: Boot HT siblings at least once") Signed-off-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-05-28cpu/hotplug: Fix notify_cpu_starting() reference in bringup_wait_for_ap()Jiri Kosina1-1/+1
bringup_wait_for_ap() comment references cpu_notify_starting(), but the function is actually called notify_cpu_starting(). Fix that. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/r/nycvar.YFH.7.76.1905282128100.1962@cbobk.fhfr.pm
2019-05-07Merge branch 'timers-core-for-linus' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Ingo Molnar: "This cycle had the following changes: - Timer tracing improvements (Anna-Maria Gleixner) - Continued tasklet reduction work: remove the hrtimer_tasklet (Thomas Gleixner) - Fix CPU hotplug remove race in the tick-broadcast mask handling code (Thomas Gleixner) - Force upper bound for setting CLOCK_REALTIME, to fix ABI inconsistencies with handling values that are close to the maximum supported and the vagueness of when uptime related wraparound might occur. Make the consistent maximum the year 2232 across all relevant ABIs and APIs. (Thomas Gleixner) - various cleanups and smaller fixes" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tick: Fix typos in comments tick/broadcast: Fix warning about undefined tick_broadcast_oneshot_offline() timekeeping: Force upper bound for setting CLOCK_REALTIME timer/trace: Improve timer tracing timer/trace: Replace deprecated vsprintf pointer extension %pf by %ps timer: Move trace point to get proper index tick/sched: Update tick_sched struct documentation tick: Remove outgoing CPU from broadcast masks timekeeping: Consistently use unsigned int for seqcount snapshot softirq: Remove tasklet_hrtimer xfrm: Replace hrtimer tasklet with softirq hrtimer mac80211_hwsim: Replace hrtimer tasklet with softirq hrtimer
2019-05-07Merge branch 'smp-hotplug-for-linus' of ↵Linus Torvalds1-25/+39
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull CPU hotplug updates from Ingo Molnar: "Two changes in this cycle: - Make the /sys/devices/system/cpu/smt/* files available on all arches, so user space has a consistent way to detect whether SMT is enabled. - Sparse annotation fix" * 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: smpboot: Place the __percpu annotation correctly cpu/hotplug: Create SMT sysfs interface for all arches
2019-05-07Merge branch 'sched-core-for-linus' of ↵Linus Torvalds1-1/+9
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: "The main changes in this cycle were: - Make nohz housekeeping processing more permissive and less intrusive to isolated CPUs - Decouple CPU-bound workqueue acconting from the scheduler and move it into the workqueue code. - Optimize topology building - Better handle quota and period overflows - Add more RCU annotations - Comment updates, misc cleanups" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits) nohz_full: Allow the boot CPU to be nohz_full sched/isolation: Require a present CPU in housekeeping mask kernel/cpu: Allow non-zero CPU to be primary for suspend / kexec freeze power/suspend: Add function to disable secondaries for suspend sched/core: Allow the remote scheduler tick to be started on CPU0 sched/nohz: Run NOHZ idle load balancer on HK_FLAG_MISC CPUs sched/debug: Fix spelling mistake "logaritmic" -> "logarithmic" sched/topology: Update init_sched_domains() comment cgroup/cpuset: Update stale generate_sched_domains() comments sched/core: Check quota and period overflow at usec to nsec conversion sched/core: Handle overflow in cpu_shares_write_u64 sched/rt: Check integer overflow at usec to nsec conversion sched/core: Fix typo in comment sched/core: Make some functions static sched/core: Unify p->on_rq updates sched/core: Remove ttwu_activate() sched/core, workqueues: Distangle worker accounting from rq lock sched/fair: Remove unneeded prototype of capacity_of() sched/topology: Skip duplicate group rewrites in build_sched_groups() sched/topology: Fix build_sched_groups() comment ...
2019-05-06Merge branch 'core-speculation-for-linus' of ↵Linus Torvalds1-0/+15
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull speculation mitigation update from Ingo Molnar: "This adds the "mitigations=" bootline option, which offers a cross-arch set of options that will work on x86, PowerPC and s390 that will map to the arch specific option internally" * 'core-speculation-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: s390/speculation: Support 'mitigations=' cmdline option powerpc/speculation: Support 'mitigations=' cmdline option x86/speculation: Support 'mitigations=' cmdline option cpu/speculation: Add 'mitigations=' cmdline option
2019-05-03kernel/cpu: Allow non-zero CPU to be primary for suspend / kexec freezeNicholas Piggin1-1/+9
This patch provides an arch option, ARCH_SUSPEND_NONZERO_CPU, to opt-in to allowing suspend to occur on one of the housekeeping CPUs rather than hardcoded CPU0. This will allow CPU0 to be a nohz_full CPU with a later change. It may be possible for platforms with hardware/firmware restrictions on suspend/wake effectively support this by handing off the final stage to CPU0 when kernel housekeeping is no longer required. Another option is to make housekeeping / nohz_full mask dynamic at runtime, but the complexity could not be justified at this time. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lkml.kernel.org/r/20190411033448.20842-4-npiggin@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-04-17cpu/speculation: Add 'mitigations=' cmdline optionJosh Poimboeuf1-0/+15
Keeping track of the number of mitigations for all the CPU speculation bugs has become overwhelming for many users. It's getting more and more complicated to decide which mitigations are needed for a given architecture. Complicating matters is the fact that each arch tends to have its own custom way to mitigate the same vulnerability. Most users fall into a few basic categories: a) they want all mitigations off; b) they want all reasonable mitigations on, with SMT enabled even if it's vulnerable; or c) they want all reasonable mitigations on, with SMT disabled if vulnerable. Define a set of curated, arch-independent options, each of which is an aggregation of existing options: - mitigations=off: Disable all mitigations. - mitigations=auto: [default] Enable all the default mitigations, but leave SMT enabled, even if it's vulnerable. - mitigations=auto,nosmt: Enable all the default mitigations, disabling SMT if needed by a mitigation. Currently, these options are placeholders which don't actually do anything. They will be fleshed out in upcoming patches. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Jiri Kosina <jkosina@suse.cz> (on x86) Reviewed-by: Jiri Kosina <jkosina@suse.cz> Cc: Borislav Petkov <bp@alien8.de> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Waiman Long <longman@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Jon Masters <jcm@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: linuxppc-dev@lists.ozlabs.org Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux-s390@vger.kernel.org Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-arch@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Tyler Hicks <tyhicks@canonical.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Steven Price <steven.price@arm.com> Cc: Phil Auld <pauld@redhat.com> Link: https://lkml.kernel.org/r/b07a8ef9b7c5055c3a4637c87d07c296d5016fe0.1555085500.git.jpoimboe@redhat.com
2019-04-02cpu/hotplug: Create SMT sysfs interface for all archesJosh Poimboeuf1-25/+39
Make the /sys/devices/system/cpu/smt/* files available on all arches, so user space has a consistent way to detect whether SMT is enabled. The 'control' file now shows 'notimplemented' for architectures which don't yet have CONFIG_HOTPLUG_SMT. [ tglx: Make notimplemented a real state ] Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Waiman Long <longman@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Jiri Kosina <jikos@kernel.org> Link: https://lkml.kernel.org/r/469c2b98055f2c41e75748e06447d592a64080c9.1553635520.git.jpoimboe@redhat.com
2019-03-28cpu/hotplug: Prevent crash when CPU bringup fails on CONFIG_HOTPLUG_CPU=nThomas Gleixner1-2/+18
Tianyu reported a crash in a CPU hotplug teardown callback when booting a kernel which has CONFIG_HOTPLUG_CPU disabled with the 'nosmt' boot parameter. It turns out that the SMP=y CONFIG_HOTPLUG_CPU=n case has been broken forever in case that a bringup callback fails. Unfortunately this issue was not recognized when the CPU hotplug code was reworked, so the shortcoming just stayed in place. When a bringup callback fails, the CPU hotplug code rolls back the operation and takes the CPU offline. The 'nosmt' command line argument uses a bringup failure to abort the bringup of SMT sibling CPUs. This partial bringup is required due to the MCE misdesign on Intel CPUs. With CONFIG_HOTPLUG_CPU=y the rollback works perfectly fine, but CONFIG_HOTPLUG_CPU=n lacks essential mechanisms to exercise the low level teardown of a CPU including the synchronizations in various facilities like RCU, NOHZ and others. As a consequence the teardown callbacks which must be executed on the outgoing CPU within stop machine with interrupts disabled are executed on the control CPU in interrupt enabled and preemptible context causing the kernel to crash and burn. The pre state machine code has a different failure mode which is more subtle and resulting in a less obvious use after free crash because the control side frees resources which are still in use by the undead CPU. But this is not a x86 only problem. Any architecture which supports the SMP=y HOTPLUG_CPU=n combination suffers from the same issue. It's just less likely to be triggered because in 99.99999% of the cases all bringup callbacks succeed. The easy solution of making HOTPLUG_CPU mandatory for SMP is not working on all architectures as the following architectures have either no hotplug support at all or not all subarchitectures support it: alpha, arc, hexagon, openrisc, riscv, sparc (32bit), mips (partial). Crashing the kernel in such a situation is not an acceptable state either. Implement a minimal rollback variant by limiting the teardown to the point where all regular teardown callbacks have been invoked and leave the CPU in the 'dead' idle state. This has the following consequences: - the CPU is brought down to the point where the stop_machine takedown would happen. - the CPU stays there forever and is idle - The CPU is cleared in the CPU active mask, but not in the CPU online mask which is a legit state. - Interrupts are not forced away from the CPU - All facilities which only look at online mask would still see it, but that is the case during normal hotplug/unplug operations as well. It's just a (way) longer time frame. This will expose issues, which haven't been exposed before or only seldom, because now the normally transient state of being non active but online is a permanent state. In testing this exposed already an issue vs. work queues where the vmstat code schedules work on the almost dead CPU which ends up in an unbound workqueue and triggers 'preemtible context' warnings. This is not a problem of this change, it merily exposes an already existing issue. Still this is better than crashing fully without a chance to debug it. This is mainly thought as workaround for those architectures which do not support HOTPLUG_CPU. All others should enforce HOTPLUG_CPU for SMP. Fixes: 2e1a3483ce74 ("cpu/hotplug: Split out the state walk into functions") Reported-by: Tianyu Lan <Tianyu.Lan@microsoft.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Tianyu Lan <Tianyu.Lan@microsoft.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Konrad Wilk <konrad.wilk@oracle.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Mukesh Ojha <mojha@codeaurora.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Rik van Riel <riel@surriel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Micheal Kelley <michael.h.kelley@microsoft.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Borislav Petkov <bp@alien8.de> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190326163811.503390616@linutronix.de
2019-03-23tick: Remove outgoing CPU from broadcast masksThomas Gleixner1-0/+2
Valentin reported that unplugging a CPU occasionally results in a warning in the tick broadcast code which is triggered when an offline CPU is in the broadcast mask. This happens because the outgoing CPU is not removing itself from the broadcast masks, especially not from the broadcast_force_mask. The removal happens on the control CPU after the outgoing CPU is dead. It's a long standing issue, but the warning is harmless. Rework the hotplug mechanism so that the outgoing CPU removes itself from the broadcast masks after disabling interrupts and removing itself from the online mask. Reported-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Valentin Schneider <valentin.schneider@arm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1903211540180.1784@nanos.tec.linutronix.de
2019-02-04Merge tag 'v5.0-rc5' into locking/core to pick up fixesIngo Molnar1-33/+5
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-01-30cpu/hotplug: Fix "SMT disabled by BIOS" detection for KVMJosh Poimboeuf1-29/+4
With the following commit: 73d5e2b47264 ("cpu/hotplug: detect SMT disabled by BIOS") ... the hotplug code attempted to detect when SMT was disabled by BIOS, in which case it reported SMT as permanently disabled. However, that code broke a virt hotplug scenario, where the guest is booted with only primary CPU threads, and a sibling is brought online later. The problem is that there doesn't seem to be a way to reliably distinguish between the HW "SMT disabled by BIOS" case and the virt "sibling not yet brought online" case. So the above-mentioned commit was a bit misguided, as it permanently disabled SMT for both cases, preventing future virt sibling hotplugs. Going back and reviewing the original problems which were attempted to be solved by that commit, when SMT was disabled in BIOS: 1) /sys/devices/system/cpu/smt/control showed "on" instead of "notsupported"; and 2) vmx_vm_init() was incorrectly showing the L1TF_MSG_SMT warning. I'd propose that we instead consider #1 above to not actually be a problem. Because, at least in the virt case, it's possible that SMT wasn't disabled by BIOS and a sibling thread could be brought online later. So it makes sense to just always default the smt control to "on" to allow for that possibility (assuming cpuid indicates that the CPU supports SMT). The real problem is #2, which has a simple fix: change vmx_vm_init() to query the actual current SMT state -- i.e., whether any siblings are currently online -- instead of looking at the SMT "control" sysfs value. So fix it by: a) reverting the original "fix" and its followup fix: 73d5e2b47264 ("cpu/hotplug: detect SMT disabled by BIOS") bc2d8d262cba ("cpu/hotplug: Fix SMT supported evaluation") and b) changing vmx_vm_init() to query the actual current SMT state -- instead of the sysfs control value -- to determine whether the L1TF warning is needed. This also requires the 'sched_smt_present' variable to exported, instead of 'cpu_smt_control'. Fixes: 73d5e2b47264 ("cpu/hotplug: detect SMT disabled by BIOS") Reported-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Joe Mario <jmario@redhat.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: kvm@vger.kernel.org Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/e3a85d585da28cc333ecbc1e78ee9216e6da9396.1548794349.git.jpoimboe@redhat.com
2019-01-30x86/speculation: Remove redundant arch_smt_update() invocationZhenzhong Duan1-4/+1
With commit a74cfffb03b7 ("x86/speculation: Rework SMT state change"), arch_smt_update() is invoked from each individual CPU hotplug function. Therefore the extra arch_smt_update() call in the sysfs SMT control is redundant. Fixes: a74cfffb03b7 ("x86/speculation: Rework SMT state change") Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: <konrad.wilk@oracle.com> Cc: <dwmw@amazon.co.uk> Cc: <bp@suse.de> Cc: <srinivas.eeda@oracle.com> Cc: <peterz@infradead.org> Cc: <hpa@zytor.com> Link: https://lkml.kernel.org/r/e2e064f2-e8ef-42ca-bf4f-76b612964752@default
2019-01-21cpu/hotplug: Mute hotplug lockdep during initValentin Schneider1-0/+9
Since we've had: commit cb538267ea1e ("jump_label/lockdep: Assert we hold the hotplug lock for _cpuslocked() operations") we've been getting some lockdep warnings during init, such as on HiKey960: [ 0.820495] WARNING: CPU: 4 PID: 0 at kernel/cpu.c:316 lockdep_assert_cpus_held+0x3c/0x48 [ 0.820498] Modules linked in: [ 0.820509] CPU: 4 PID: 0 Comm: swapper/4 Tainted: G S 4.20.0-rc5-00051-g4cae42a #34 [ 0.820511] Hardware name: HiKey960 (DT) [ 0.820516] pstate: 600001c5 (nZCv dAIF -PAN -UAO) [ 0.820520] pc : lockdep_assert_cpus_held+0x3c/0x48 [ 0.820523] lr : lockdep_assert_cpus_held+0x38/0x48 [ 0.820526] sp : ffff00000a9cbe50 [ 0.820528] x29: ffff00000a9cbe50 x28: 0000000000000000 [ 0.820533] x27: 00008000b69e5000 x26: ffff8000bff4cfe0 [ 0.820537] x25: ffff000008ba69e0 x24: 0000000000000001 [ 0.820541] x23: ffff000008fce000 x22: ffff000008ba70c8 [ 0.820545] x21: 0000000000000001 x20: 0000000000000003 [ 0.820548] x19: ffff00000a35d628 x18: ffffffffffffffff [ 0.820552] x17: 0000000000000000 x16: 0000000000000000 [ 0.820556] x15: ffff00000958f848 x14: 455f3052464d4d34 [ 0.820559] x13: 00000000769dde98 x12: ffff8000bf3f65a8 [ 0.820564] x11: 0000000000000000 x10: ffff00000958f848 [ 0.820567] x9 : ffff000009592000 x8 : ffff00000958f848 [ 0.820571] x7 : ffff00000818ffa0 x6 : 0000000000000000 [ 0.820574] x5 : 0000000000000000 x4 : 0000000000000001 [ 0.820578] x3 : 0000000000000000 x2 : 0000000000000001 [ 0.820582] x1 : 00000000ffffffff x0 : 0000000000000000 [ 0.820587] Call trace: [ 0.820591] lockdep_assert_cpus_held+0x3c/0x48 [ 0.820598] static_key_enable_cpuslocked+0x28/0xd0 [ 0.820606] arch_timer_check_ool_workaround+0xe8/0x228 [ 0.820610] arch_timer_starting_cpu+0xe4/0x2d8 [ 0.820615] cpuhp_invoke_callback+0xe8/0xd08 [ 0.820619] notify_cpu_starting+0x80/0xb8 [ 0.820625] secondary_start_kernel+0x118/0x1d0 We've also had a similar warning in sched_init_smp() for every asymmetric system that would enable the sched_asym_cpucapacity static key, although that was singled out in: commit 40fa3780bac2 ("sched/core: Take the hotplug lock in sched_init_smp()") Those warnings are actually harmless, since we cannot have hotplug operations at the time they appear. Instead of starting to sprinkle useless hotplug lock operations in the init codepaths, mute the warnings until they start warning about real problems. Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: cai@gmx.us Cc: daniel.lezcano@linaro.org Cc: dietmar.eggemann@arm.com Cc: linux-arm-kernel@lists.infradead.org Cc: longman@redhat.com Cc: marc.zyngier@arm.com Cc: mark.rutland@arm.com Link: https://lkml.kernel.org/r/1545243796-23224-2-git-send-email-valentin.schneider@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-11-28x86/speculation: Rework SMT state changeThomas Gleixner1-6/+9
arch_smt_update() is only called when the sysfs SMT control knob is changed. This means that when SMT is enabled in the sysfs control knob the system is considered to have SMT active even if all siblings are offline. To allow finegrained control of the speculation mitigations, the actual SMT state is more interesting than the fact that siblings could be enabled. Rework the code, so arch_smt_update() is invoked from each individual CPU hotplug function, and simplify the update function while at it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Casey Schaufler <casey.schaufler@intel.com> Cc: Asit Mallick <asit.k.mallick@intel.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Jon Masters <jcm@redhat.com> Cc: Waiman Long <longman9394@gmail.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Dave Stewart <david.c.stewart@intel.com> Cc: Kees Cook <keescook@chromium.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20181125185004.521974984@linutronix.de
2018-10-23Merge branch 'x86-pti-for-linus' of ↵Linus Torvalds1-1/+10
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 pti updates from Ingo Molnar: "The main changes: - Make the IBPB barrier more strict and add STIBP support (Jiri Kosina) - Micro-optimize and clean up the entry code (Andy Lutomirski) - ... plus misc other fixes" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/speculation: Propagate information about RSB filling mitigation to sysfs x86/speculation: Enable cross-hyperthread spectre v2 STIBP mitigation x86/speculation: Apply IBPB more strictly to avoid cross-process data leak x86/speculation: Add RETPOLINE_AMD support to the inline asm CALL_NOSPEC variant x86/CPU: Fix unused variable warning when !CONFIG_IA32_EMULATION x86/pti/64: Remove the SYSCALL64 entry trampoline x86/entry/64: Use the TSS sp2 slot for SYSCALL/SYSRET scratch space x86/entry/64: Document idtentry
2018-10-23Merge branch 'sched-core-for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: "The main changes are: - Migrate CPU-intense 'misfit' tasks on asymmetric capacity systems, to better utilize (much) faster 'big core' CPUs. (Morten Rasmussen, Valentin Schneider) - Topology handling improvements, in particular when CPU capacity changes and related load-balancing fixes/improvements (Morten Rasmussen) - ... plus misc other improvements, fixes and updates" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (28 commits) sched/completions/Documentation: Add recommendation for dynamic and ONSTACK completions sched/completions/Documentation: Clean up the document some more sched/completions/Documentation: Fix a couple of punctuation nits cpu/SMT: State SMT is disabled even with nosmt and without "=force" sched/core: Fix comment regarding nr_iowait_cpu() and get_iowait_load() sched/fair: Remove setting task's se->runnable_weight during PELT update sched/fair: Disable LB_BIAS by default sched/pelt: Fix warning and clean up IRQ PELT config sched/topology: Make local variables static sched/debug: Use symbolic names for task state constants sched/numa: Remove unused numa_stats::nr_running field sched/numa: Remove unused code from update_numa_stats() sched/debug: Explicitly cast sched_feat() to bool sched/core: Disable SD_PREFER_SIBLING on asymmetric CPU capacity domains sched/fair: Don't move tasks to lower capacity CPUs unless necessary sched/fair: Set rq->rd->overload when misfit sched/fair: Wrap rq->rd->overload accesses with READ/WRITE_ONCE() sched/core: Change root_domain->overload type to int sched/fair: Change 'prefer_sibling' type to bool sched/fair: Kick nohz balance if rq->misfit_task_load ...
2018-10-05cpu/SMT: State SMT is disabled even with nosmt and without "=force"Borislav Petkov1-0/+1
When booting with "nosmt=force" a message is issued into dmesg to confirm that SMT has been force-disabled but such a message is not issued when only "nosmt" is on the kernel command line. Fix that. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20181004172227.10094-1-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-09-26x86/speculation: Enable cross-hyperthread spectre v2 STIBP mitigationJiri Kosina1-1/+10
STIBP is a feature provided by certain Intel ucodes / CPUs. This feature (once enabled) prevents cross-hyperthread control of decisions made by indirect branch predictors. Enable this feature if - the CPU is vulnerable to spectre v2 - the CPU supports SMT and has SMT siblings online - spectre_v2 mitigation autoselection is enabled (default) After some previous discussion, this leaves STIBP on all the time, as wrmsr on crossing kernel boundary is a no-no. This could perhaps later be a bit more optimized (like disabling it in NOHZ, experiment with disabling it in idle, etc) if needed. Note that the synchronization of the mask manipulation via newly added spec_ctrl_mutex is currently not strictly needed, as the only updater is already being serialized by cpu_add_remove_lock, but let's make this a little bit more future-proof. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "WoodhouseDavid" <dwmw@amazon.co.uk> Cc: Andi Kleen <ak@linux.intel.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: "SchauflerCasey" <casey.schaufler@intel.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/nycvar.YFH.7.76.1809251438240.15880@cbobk.fhfr.pm