summaryrefslogtreecommitdiff
path: root/kernel/module_signing.c
AgeCommit message (Collapse)AuthorFilesLines
2016-04-12KEYS: Move the point of trust determination to __key_link()David Howells1-1/+1
Move the point at which a key is determined to be trustworthy to __key_link() so that we use the contents of the keyring being linked in to to determine whether the key being linked in is trusted or not. What is 'trusted' then becomes a matter of what's in the keyring. Currently, the test is done when the key is parsed, but given that at that point we can only sensibly refer to the contents of the system trusted keyring, we can only use that as the basis for working out the trustworthiness of a new key. With this change, a trusted keyring is a set of keys that once the trusted-only flag is set cannot be added to except by verification through one of the contained keys. Further, adding a key into a trusted keyring, whilst it might grant trustworthiness in the context of that keyring, does not automatically grant trustworthiness in the context of a second keyring to which it could be secondarily linked. To accomplish this, the authentication data associated with the key source must now be retained. For an X.509 cert, this means the contents of the AuthorityKeyIdentifier and the signature data. If system keyrings are disabled then restrict_link_by_builtin_trusted() resolves to restrict_link_reject(). The integrity digital signature code still works correctly with this as it was previously using KEY_FLAG_TRUSTED_ONLY, which doesn't permit anything to be added if there is no system keyring against which trust can be determined. Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-06PKCS#7: Make trust determination dependent on contents of trust keyringDavid Howells1-1/+1
Make the determination of the trustworthiness of a key dependent on whether a key that can verify it is present in the supplied ring of trusted keys rather than whether or not the verifying key has KEY_FLAG_TRUSTED set. verify_pkcs7_signature() will return -ENOKEY if the PKCS#7 message trust chain cannot be verified. Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-06KEYS: Generalise system_verify_data() to provide access to internal contentDavid Howells1-2/+3
Generalise system_verify_data() to provide access to internal content through a callback. This allows all the PKCS#7 stuff to be hidden inside this function and removed from the PE file parser and the PKCS#7 test key. If external content is not required, NULL should be passed as data to the function. If the callback is not required, that can be set to NULL. The function is now called verify_pkcs7_signature() to contrast with verify_pefile_signature() and the definitions of both have been moved into linux/verification.h along with the key_being_used_for enum. Signed-off-by: David Howells <dhowells@redhat.com>
2016-03-04X.509: Make algo identifiers text instead of enumDavid Howells1-0/+6
Make the identifier public key and digest algorithm fields text instead of enum. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-03-01MODSIGN: linux/string.h should be #included to get memcpy()David Howells1-0/+1
linux/string.h should be #included in module_signing.c to get memcpy(), lest the following occur: kernel/module_signing.c: In function 'mod_verify_sig': kernel/module_signing.c:57:2: error: implicit declaration of function 'memcpy' [-Werror=implicit-function-declaration] memcpy(&ms, mod + (modlen - sizeof(ms)), sizeof(ms)); ^ Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: David Howells <dhowells@redhat.com>
2015-10-21KEYS: Merge the type-specific data with the payload dataDavid Howells1-0/+1
Merge the type-specific data with the payload data into one four-word chunk as it seems pointless to keep them separate. Use user_key_payload() for accessing the payloads of overloaded user-defined keys. Signed-off-by: David Howells <dhowells@redhat.com> cc: linux-cifs@vger.kernel.org cc: ecryptfs@vger.kernel.org cc: linux-ext4@vger.kernel.org cc: linux-f2fs-devel@lists.sourceforge.net cc: linux-nfs@vger.kernel.org cc: ceph-devel@vger.kernel.org cc: linux-ima-devel@lists.sourceforge.net
2015-08-12PKCS#7: Appropriately restrict authenticated attributes and content typeDavid Howells1-1/+2
A PKCS#7 or CMS message can have per-signature authenticated attributes that are digested as a lump and signed by the authorising key for that signature. If such attributes exist, the content digest isn't itself signed, but rather it is included in a special authattr which then contributes to the signature. Further, we already require the master message content type to be pkcs7_signedData - but there's also a separate content type for the data itself within the SignedData object and this must be repeated inside the authattrs for each signer [RFC2315 9.2, RFC5652 11.1]. We should really validate the authattrs if they exist or forbid them entirely as appropriate. To this end: (1) Alter the PKCS#7 parser to reject any message that has more than one signature where at least one signature has authattrs and at least one that does not. (2) Validate authattrs if they are present and strongly restrict them. Only the following authattrs are permitted and all others are rejected: (a) contentType. This is checked to be an OID that matches the content type in the SignedData object. (b) messageDigest. This must match the crypto digest of the data. (c) signingTime. If present, we check that this is a valid, parseable UTCTime or GeneralTime and that the date it encodes fits within the validity window of the matching X.509 cert. (d) S/MIME capabilities. We don't check the contents. (e) Authenticode SP Opus Info. We don't check the contents. (f) Authenticode Statement Type. We don't check the contents. The message is rejected if (a) or (b) are missing. If the message is an Authenticode type, the message is rejected if (e) is missing; if not Authenticode, the message is rejected if (d) - (f) are present. The S/MIME capabilities authattr (d) unfortunately has to be allowed to support kernels already signed by the pesign program. This only affects kexec. sign-file suppresses them (CMS_NOSMIMECAP). The message is also rejected if an authattr is given more than once or if it contains more than one element in its set of values. (3) Add a parameter to pkcs7_verify() to select one of the following restrictions and pass in the appropriate option from the callers: (*) VERIFYING_MODULE_SIGNATURE This requires that the SignedData content type be pkcs7-data and forbids authattrs. sign-file sets CMS_NOATTR. We could be more flexible and permit authattrs optionally, but only permit minimal content. (*) VERIFYING_FIRMWARE_SIGNATURE This requires that the SignedData content type be pkcs7-data and requires authattrs. In future, this will require an attribute holding the target firmware name in addition to the minimal set. (*) VERIFYING_UNSPECIFIED_SIGNATURE This requires that the SignedData content type be pkcs7-data but allows either no authattrs or only permits the minimal set. (*) VERIFYING_KEXEC_PE_SIGNATURE This only supports the Authenticode SPC_INDIRECT_DATA content type and requires at least an SpcSpOpusInfo authattr in addition to the minimal set. It also permits an SPC_STATEMENT_TYPE authattr (and an S/MIME capabilities authattr because the pesign program doesn't remove these). (*) VERIFYING_KEY_SIGNATURE (*) VERIFYING_KEY_SELF_SIGNATURE These are invalid in this context but are included for later use when limiting the use of X.509 certs. (4) The pkcs7_test key type is given a module parameter to select between the above options for testing purposes. For example: echo 1 >/sys/module/pkcs7_test_key/parameters/usage keyctl padd pkcs7_test foo @s </tmp/stuff.pkcs7 will attempt to check the signature on stuff.pkcs7 as if it contains a firmware blob (1 being VERIFYING_FIRMWARE_SIGNATURE). Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Marcel Holtmann <marcel@holtmann.org> Reviewed-by: David Woodhouse <David.Woodhouse@intel.com>
2015-08-07MODSIGN: Extract the blob PKCS#7 signature verifier from module signingDavid Howells1-43/+1
Extract the function that drives the PKCS#7 signature verification given a data blob and a PKCS#7 blob out from the module signing code and lump it with the system keyring code as it's generic. This makes it independent of module config options and opens it to use by the firmware loader. Signed-off-by: David Howells <dhowells@redhat.com> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Ming Lei <ming.lei@canonical.com> Cc: Seth Forshee <seth.forshee@canonical.com> Cc: Kyle McMartin <kyle@kernel.org>
2015-08-07MODSIGN: Use PKCS#7 messages as module signaturesDavid Howells1-176/+44
Move to using PKCS#7 messages as module signatures because: (1) We have to be able to support the use of X.509 certificates that don't have a subjKeyId set. We're currently relying on this to look up the X.509 certificate in the trusted keyring list. (2) PKCS#7 message signed information blocks have a field that supplies the data required to match with the X.509 certificate that signed it. (3) The PKCS#7 certificate carries fields that specify the digest algorithm used to generate the signature in a standardised way and the X.509 certificates specify the public key algorithm in a standardised way - so we don't need our own methods of specifying these. (4) We now have PKCS#7 message support in the kernel for signed kexec purposes and we can make use of this. To make this work, the old sign-file script has been replaced with a program that needs compiling in a previous patch. The rules to build it are added here. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Vivek Goyal <vgoyal@redhat.com>
2013-10-26keys: change asymmetric keys to use common hash definitionsDmitry Kasatkin1-4/+4
This patch makes use of the newly defined common hash algorithm info, replacing, for example, PKEY_HASH with HASH_ALGO. Changelog: - Lindent fixes - Mimi CC: David Howells <dhowells@redhat.com> Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2013-09-25KEYS: Separate the kernel signature checking keyring from module signingDavid Howells1-1/+2
Separate the kernel signature checking keyring from module signing so that it can be used by code other than the module-signing code. Signed-off-by: David Howells <dhowells@redhat.com>
2013-09-25KEYS: Rename public key parameter name arraysDavid Howells1-2/+2
Rename the arrays of public key parameters (public key algorithm names, hash algorithm names and ID type names) so that the array name ends in "_name". Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Josh Boyer <jwboyer@redhat.com>
2012-12-05MODSIGN: Don't use enum-type bitfields in module signature info blockDavid Howells1-7/+7
Don't use enum-type bitfields in the module signature info block as we can't be certain how the compiler will handle them. As I understand it, it is arch dependent, and it is possible for the compiler to rearrange them based on endianness and to insert a byte of padding to pad the three enums out to four bytes. Instead use u8 fields for these, which the compiler should emit in the right order without padding. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-10-22module_signing: fix printk format warningRandy Dunlap1-1/+1
Fix the warning: kernel/module_signing.c:195:2: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'size_t' by using the proper 'z' modifier for printing a size_t. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-20MODSIGN: Move the magic string to the end of a module and eliminate the searchDavid Howells1-9/+15
Emit the magic string that indicates a module has a signature after the signature data instead of before it. This allows module_sig_check() to be made simpler and faster by the elimination of the search for the magic string. Instead we just need to do a single memcmp(). This works because at the end of the signature data there is the fixed-length signature information block. This block then falls immediately prior to the magic number. From the contents of the information block, it is trivial to calculate the size of the signature data and thus the size of the actual module data. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-10MODSIGN: Implement module signature checkingDavid Howells1-1/+221
Check the signature on the module against the keys compiled into the kernel or available in a hardware key store. Currently, only RSA keys are supported - though that's easy enough to change, and the signature is expected to contain raw components (so not a PGP or PKCS#7 formatted blob). The signature blob is expected to consist of the following pieces in order: (1) The binary identifier for the key. This is expected to match the SubjectKeyIdentifier from an X.509 certificate. Only X.509 type identifiers are currently supported. (2) The signature data, consisting of a series of MPIs in which each is in the format of a 2-byte BE word sizes followed by the content data. (3) A 12 byte information block of the form: struct module_signature { enum pkey_algo algo : 8; enum pkey_hash_algo hash : 8; enum pkey_id_type id_type : 8; u8 __pad; __be32 id_length; __be32 sig_length; }; The three enums are defined in crypto/public_key.h. 'algo' contains the public-key algorithm identifier (0->DSA, 1->RSA). 'hash' contains the digest algorithm identifier (0->MD4, 1->MD5, 2->SHA1, etc.). 'id_type' contains the public-key identifier type (0->PGP, 1->X.509). '__pad' should be 0. 'id_length' should contain in the binary identifier length in BE form. 'sig_length' should contain in the signature data length in BE form. The lengths are in BE order rather than CPU order to make dealing with cross-compilation easier. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (minor Kconfig fix)
2012-10-10module: signature checking hookRusty Russell1-0/+23
We do a very simple search for a particular string appended to the module (which is cache-hot and about to be SHA'd anyway). There's both a config option and a boot parameter which control whether we accept or fail with unsigned modules and modules that are signed with an unknown key. If module signing is enabled, the kernel will be tainted if a module is loaded that is unsigned or has a signature for which we don't have the key. (Useful feedback and tweaks by David Howells <dhowells@redhat.com>) Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>