Age | Commit message (Collapse) | Author | Files | Lines |
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty and serial updates from Greg KH:
"Here is the big set of tty/serial driver changes for 6.7-rc1. Included
in here are:
- console/vgacon cleanups and removals from Arnd
- tty core and n_tty cleanups from Jiri
- lots of 8250 driver updates and cleanups
- sc16is7xx serial driver updates
- dt binding updates
- first set of port lock wrapers from Thomas for the printk fixes
coming in future releases
- other small serial and tty core cleanups and updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (193 commits)
serdev: Replace custom code with device_match_acpi_handle()
serdev: Simplify devm_serdev_device_open() function
serdev: Make use of device_set_node()
tty: n_gsm: add copyright Siemens Mobility GmbH
tty: n_gsm: fix race condition in status line change on dead connections
serial: core: Fix runtime PM handling for pending tx
vgacon: fix mips/sibyte build regression
dt-bindings: serial: drop unsupported samsung bindings
tty: serial: samsung: drop earlycon support for unsupported platforms
tty: 8250: Add note for PX-835
tty: 8250: Fix IS-200 PCI ID comment
tty: 8250: Add Brainboxes Oxford Semiconductor-based quirks
tty: 8250: Add support for Intashield IX cards
tty: 8250: Add support for additional Brainboxes PX cards
tty: 8250: Fix up PX-803/PX-857
tty: 8250: Fix port count of PX-257
tty: 8250: Add support for Intashield IS-100
tty: 8250: Add support for Brainboxes UP cards
tty: 8250: Add support for additional Brainboxes UC cards
tty: 8250: Remove UC-257 and UC-431
...
|
|
|
|
|
|
|
|
In the following two functions, len has already been assigned a value of
0 when defining the variable, so remove 'len=0;'.
Signed-off-by: Li kunyu <kunyu@nfschina.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20231023062359.130633-1-kunyu@nfschina.com
|
|
While adding a preferred console handling for serial_core for serial port
hardware based device addressing, Jiri suggested we constify name for
add_preferred_console(). The name gets copied anyways. This allows serial
core to add a preferred console using serial drv->dev_name without copying
it.
Note that constifying options causes changes all over the place because of
struct console for match().
Suggested-by: Jiri Slaby <jirislaby@kernel.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20231012064300.50221-2-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Let's check for valid console index values for preferred console to avoid
bogus console index numbers from kernel command line.
Let's also return an error for negative index numbers for the preferred
console. Unlike for device drivers, a negative index is not valid for the
preferred console.
Let's also constify idx while at it.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20231012064300.50221-1-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
pr_flush() does not guarantee that all messages would really get flushed
to the console. The best it could do is to wait with a given timeout.[*]
The current interval 100ms for checking the progress might seem too
long in some situations. For example, such delays are not appreciated
during suspend and resume especially when the consoles have been flushed
"long" time before the check.
On the other hand, the sleeping wait might be useful in other situations.
Especially, it would allow flushing the messages using printk kthreads
on the same CPU[*].
Use msleep(1) as a compromise.
Also measure the time using jiffies. msleep() does not guarantee
precise wakeup after the given delay. It might be much longer,
especially for times < 20s. See Documentation/timers/timers-howto.rst
for more details.
Note that msecs_to_jiffies() already translates a negative value into
an infinite timeout.
[*] console_unlock() does not guarantee flushing the consoles since
the commit dbdda842fe96f893 ("printk: Add console owner and waiter
logic to load balance console writes").
It would be possible to guarantee it another way. For example,
the spinning might be enabled only when the console_lock has been
taken via console_trylock().
But the load balancing is helpful. And more importantly, the flush
with a timeout has been added as a preparation step for introducing
printk kthreads.
Signed-off-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Link: https://lore.kernel.org/r/20231006082151.6969-3-pmladek@suse.com
|
|
|
|
Commit 9e70a5e109a4 ("printk: Add per-console suspended state")
removed console lock usage during resume and replaced it with
the clearly defined console_list_lock and srcu mechanisms.
However, the console lock usage had an important side-effect
of flushing the consoles. After its removal, consoles were no
longer flushed before checking their progress.
Add the console_lock/console_unlock dance to the beginning
of __pr_flush() to actually flush the consoles before checking
their progress. Also add comments to clarify this additional
usage of the console lock.
Note that console_unlock() does not guarantee flushing all messages
since the commit dbdda842fe96f89 ("printk: Add console owner and waiter
logic to load balance console writes").
Reported-by: Todd Brandt <todd.e.brandt@intel.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217955
Fixes: 9e70a5e109a4 ("printk: Add per-console suspended state")
Co-developed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Link: https://lore.kernel.org/r/20231006082151.6969-2-pmladek@suse.com
|
|
When CONFIG_PRINTK is not set, PRINTK_MESSAGE_MAX is 0. This
leads to a zero-sized array @outbuf in @printk_shared_pbufs. In
console_flush_all() a pointer to the first element of the array
is assigned with:
char *outbuf = &printk_shared_pbufs.outbuf[0];
For !CONFIG_PRINTK this leads to a compiler warning:
warning: array subscript 0 is outside array bounds of
'char[0]' [-Warray-bounds]
This is not really dangerous because printk_get_next_message()
always returns false for !CONFIG_PRINTK, which leads to @outbuf
never being used. However, it makes no sense to even compile
these functions for !CONFIG_PRINTK.
Extend the existing '#ifdef CONFIG_PRINTK' block to contain
the formatting and emitting functions since these have no
purpose in !CONFIG_PRINTK. This also allows removing several
more !CONFIG_PRINTK dummies as well as moving
@suppress_panic_printk into a CONFIG_PRINTK block.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309201724.M9BMAQIh-lkp@intel.com/
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230920155238.670439-1-john.ogness@linutronix.de
|
|
For the write_atomic callback, the console driver may have unsafe
regions that need to be appropriately marked. Provide functions
that accept the nbcon_write_context struct to allow for the driver
to enter and exit unsafe regions.
Also provide a function for drivers to check if they are still the
owner of the console.
Co-developed-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Thomas Gleixner (Intel) <tglx@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230916192007.608398-9-john.ogness@linutronix.de
|
|
Implement an emit function for nbcon consoles to output printk
messages. It utilizes the lockless printk_get_next_message() and
console_prepend_dropped() functions to retrieve/build the output
message. The emit function includes the required safety points to
check for handover/takeover and calls a new write_atomic callback
of the console driver to output the message. It also includes
proper handling for updating the nbcon console sequence number.
A new nbcon_write_context struct is introduced. This is provided
to the write_atomic callback and includes only the information
necessary for performing atomic writes.
Co-developed-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Thomas Gleixner (Intel) <tglx@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230916192007.608398-8-john.ogness@linutronix.de
|
|
Add an atomic_long_t field @nbcon_seq to the console struct to
store the sequence number for nbcon consoles. For nbcon consoles
this will be used instead of the non-atomic @seq field. The new
field allows for safe atomic sequence number updates without
requiring any locking.
On 64bit systems the new field stores the full sequence number.
On 32bit systems the new field stores the lower 32 bits of the
sequence number, which are expanded to 64bit as needed by
folding the values based on the sequence numbers available in
the ringbuffer.
For 32bit systems, having a 32bit representation in the console
is sufficient. If a console ever gets more than 2^31 records
behind the ringbuffer then this is the least of the problems.
Co-developed-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Thomas Gleixner (Intel) <tglx@linutronix.de>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230916192007.608398-7-john.ogness@linutronix.de
|
|
Provide functions that are related to the safe handover mechanism
and allow console drivers to dynamically specify unsafe regions:
- nbcon_context_can_proceed()
Invoked by a console owner to check whether a handover request
is pending or whether the console has been taken over by another
context. If a handover request is pending, this function will
also perform the handover, thus cancelling its own ownership.
- nbcon_context_enter_unsafe()/nbcon_context_exit_unsafe()
Invoked by a console owner to denote that the driver is about
to enter or leave a critical region where a take over is unsafe.
The exit variant is the point where the current owner releases
the lock for a higher priority context which asked for the
friendly handover.
The unsafe state is stored in the console state and allows a
new context to make informed decisions whether to attempt a
takeover of such a console. The unsafe state is also available
to the driver so that it can make informed decisions about the
required actions and possibly take a special emergency path.
Co-developed-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Thomas Gleixner (Intel) <tglx@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230916192007.608398-6-john.ogness@linutronix.de
|
|
In case of hostile takeovers it must be ensured that the previous
owner cannot scribble over the output buffer of the emergency/panic
context. This is achieved by:
- Adding a global output buffer instance for the panic context.
This is the only situation where hostile takeovers can occur and
there is always at most 1 panic context.
- Allocating an output buffer per non-boot console upon console
registration. This buffer is used by the console owner when not
in panic context. (For boot consoles, the existing shared global
legacy output buffer is used instead. Boot console printing will
be synchronized with legacy console printing.)
- Choosing the appropriate buffer is handled in the acquire/release
functions.
Co-developed-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Thomas Gleixner (Intel) <tglx@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230916192007.608398-5-john.ogness@linutronix.de
|
|
The nbcon boot consoles also need printk buffers that are available
very early. Since the nbcon boot consoles will also be serialized
by the console_lock, they can use the same static printk buffers
that the legacy consoles are using.
Make the legacy static printk buffers available outside of printk.c
so they can be used by nbcon.c.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230916192007.608398-4-john.ogness@linutronix.de
|
|
Add per console acquire/release functionality.
The state of the console is maintained in the "nbcon_state" atomic
variable.
The console is locked when:
- The 'prio' field contains the priority of the context that owns the
console. Only higher priority contexts are allowed to take over the
lock. A value of 0 (NBCON_PRIO_NONE) means the console is not locked.
- The 'cpu' field denotes on which CPU the console is locked. It is used
to prevent busy waiting on the same CPU. Also it informs the lock owner
that it has lost the lock in a more complex scenario when the lock was
taken over by a higher priority context, released, and taken on another
CPU with the same priority as the interrupted owner.
The acquire mechanism uses a few more fields:
- The 'req_prio' field is used by the handover approach to make the
current owner aware that there is a context with a higher priority
waiting for the friendly handover.
- The 'unsafe' field allows to take over the console in a safe way in the
middle of emitting a message. The field is set only when accessing some
shared resources or when the console device is manipulated. It can be
cleared, for example, after emitting one character when the console
device is in a consistent state.
- The 'unsafe_takeover' field is set when a hostile takeover took the
console in an unsafe state. The console will stay in the unsafe state
until re-initialized.
The acquire mechanism uses three approaches:
1) Direct acquire when the console is not owned or is owned by a lower
priority context and is in a safe state.
2) Friendly handover mechanism uses a request/grant handshake. It is used
when the current owner has lower priority and the console is in an
unsafe state.
The requesting context:
a) Sets its priority into the 'req_prio' field.
b) Waits (with a timeout) for the owning context to unlock the
console.
c) Takes the lock and clears the 'req_prio' field.
The owning context:
a) Observes the 'req_prio' field set on exit from the unsafe
console state.
b) Gives up console ownership by clearing the 'prio' field.
3) Unsafe hostile takeover allows to take over the lock even when the
console is an unsafe state. It is used only in panic() by the final
attempt to flush consoles in a try and hope mode.
Note that separate record buffers are used in panic(). As a result,
the messages can be read and formatted without any risk even after
using the hostile takeover in unsafe state.
The release function simply clears the 'prio' field.
All operations on @console::nbcon_state are atomic cmpxchg based to
handle concurrency.
The acquire/release functions implement only minimal policies:
- Preference for higher priority contexts.
- Protection of the panic CPU.
All other policy decisions must be made at the call sites:
- What is marked as an unsafe section.
- Whether to spin-wait if there is already an owner and the console is
in an unsafe state.
- Whether to attempt an unsafe hostile takeover.
The design allows to implement the well known:
acquire()
output_one_printk_record()
release()
The output of one printk record might be interrupted with a higher priority
context. The new owner is supposed to reprint the entire interrupted record
from scratch.
Co-developed-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Thomas Gleixner (Intel) <tglx@linutronix.de>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230916192007.608398-3-john.ogness@linutronix.de
|
|
The current console/printk subsystem is protected by a Big Kernel Lock,
(aka console_lock) which has ill defined semantics and is more or less
stateless. This puts severe limitations on the console subsystem and
makes forced takeover and output in emergency and panic situations a
fragile endeavour that is based on try and pray.
The goal of non-BKL (nbcon) consoles is to break out of the console lock
jail and to provide a new infrastructure that avoids the pitfalls and
also allows console drivers to be gradually converted over.
The proposed infrastructure aims for the following properties:
- Per console locking instead of global locking
- Per console state that allows to make informed decisions
- Stateful handover and takeover
As a first step, state is added to struct console. The per console state
is an atomic_t using a 32bit bit field.
Reserve state bits, which will be populated later in the series. Wire
it up into the console register/unregister functionality.
It was decided to use a bitfield because using a plain u32 with
mask/shift operations resulted in uncomprehensible code.
Co-developed-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Thomas Gleixner (Intel) <tglx@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230916192007.608398-2-john.ogness@linutronix.de
|
|
This reverts commit 3e00123a13d824d63072b1824c9da59cd78356d9.
No, we never export random symbols for out of tree modules.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230905081902.321778-1-hch@lst.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Do not try to get the console lock when it is not need or useful in
panic()
- Replace the global console_suspended state by a per-console flag
- Export symbols needed for dumping the raw printk buffer in panic()
- Fix documentation of printf formats for integer types
- Moved Sergey Senozhatsky to the reviewer role
- Misc cleanups
* tag 'printk-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: export symbols for debug modules
lib: test_scanf: Add explicit type cast to result initialization in test_number_prefix()
printk: ringbuffer: Fix truncating buffer size min_t cast
printk: Rename abandon_console_lock_in_panic() to other_cpu_in_panic()
printk: Add per-console suspended state
printk: Consolidate console deferred printing
printk: Do not take console lock for console_flush_on_panic()
printk: Keep non-panic-CPUs out of console lock
printk: Reduce console_unblank() usage in unsafe scenarios
kdb: Do not assume write() callback available
docs: printk-formats: Treat char as always unsigned
docs: printk-formats: Fix hex printing of signed values
MAINTAINERS: adjust printk/vsprintf entries
|
|
|
|
the module is out-of-tree, it saves kernel logs when panic
Signed-off-by: Enlin Mu <enlin.mu@unisoc.com>
Acked-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230815020711.2604939-1-yunlong.xing@unisoc.com
|
|
If an output buffer size exceeded U16_MAX, the min_t(u16, ...) cast in
copy_data() was causing writes to truncate. This manifested as output
bytes being skipped, seen as %NUL bytes in pstore dumps when the available
record size was larger than 65536. Fix the cast to no longer truncate
the calculation.
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: John Ogness <john.ogness@linutronix.de>
Reported-by: Vijay Balakrishna <vijayb@linux.microsoft.com>
Link: https://lore.kernel.org/lkml/d8bb1ec7-a4c5-43a2-9de0-9643a70b899f@linux.microsoft.com/
Fixes: b6cf8b3f3312 ("printk: add lockless ringbuffer")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Vijay Balakrishna <vijayb@linux.microsoft.com>
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com> # Steam Deck
Reviewed-by: Tyler Hicks (Microsoft) <code@tyhicks.com>
Tested-by: Tyler Hicks (Microsoft) <code@tyhicks.com>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230811054528.never.165-kees@kernel.org
|
|
Currently abandon_console_lock_in_panic() is only used to determine if
the current CPU should immediately release the console lock because
another CPU is in panic. However, later this function will be used by
the CPU to immediately release other resources in this situation.
Rename the function to other_cpu_in_panic(), which is a better
description and does not assume it is related to the console lock.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230717194607.145135-8-john.ogness@linutronix.de
|
|
Currently the global @console_suspended is used to determine if
consoles are in a suspended state. Its primary purpose is to allow
usage of the console_lock when suspended without causing console
printing. It is synchronized by the console_lock.
Rather than relying on the console_lock to determine suspended
state, make it an official per-console state that is set within
console->flags. This allows the state to be queried via SRCU.
Remove @console_suspended. Console printing will still be avoided
when suspended because console_is_usable() returns false when
the new suspended flag is set for that console.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230717194607.145135-7-john.ogness@linutronix.de
|
|
Printing to consoles can be deferred for several reasons:
- explicitly with printk_deferred()
- printk() in NMI context
- recursive printk() calls
The current implementation is not consistent. For printk_deferred(),
irq work is scheduled twice. For NMI und recursive, panic CPU
suppression and caller delays are not properly enforced.
Correct these inconsistencies by consolidating the deferred printing
code so that vprintk_deferred() is the top-level function for
deferred printing and vprintk_emit() will perform whichever irq_work
queueing is appropriate.
Also add kerneldoc for wake_up_klogd() and defer_console_output() to
clarify their differences and appropriate usage.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230717194607.145135-6-john.ogness@linutronix.de
|
|
Currently console_flush_on_panic() will attempt to acquire the
console lock when flushing the buffer on panic. If it fails to
acquire the lock, it continues anyway because this is the last
chance to get any pending records printed.
The reason why the console lock was attempted at all was to
prevent any other CPUs from acquiring the console lock for
printing while the panic CPU was printing. But as of the
previous commit, non-panic CPUs will no longer attempt to
acquire the console lock in a panic situation. Therefore it is
no longer strictly necessary for a panic CPU to acquire the
console lock.
Avoiding taking the console lock when flushing in panic has
the additional benefit of avoiding possible deadlocks due to
semaphore usage in NMI context (semaphores are not NMI-safe)
and avoiding possible deadlocks if another CPU accesses the
semaphore and is stopped while holding one of the semaphore's
internal spinlocks.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230717194607.145135-5-john.ogness@linutronix.de
|
|
When in a panic situation, non-panic CPUs should avoid holding the
console lock so as not to contend with the panic CPU. This is already
implemented with abandon_console_lock_in_panic(), which is checked
after each printed line. However, non-panic CPUs should also avoid
trying to acquire the console lock during a panic.
Modify console_trylock() to fail and console_lock() to block() when
called from a non-panic CPU during a panic.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230717194607.145135-4-john.ogness@linutronix.de
|
|
A semaphore is not NMI-safe, even when using down_trylock(). Both
down_trylock() and up() are using internal spinlocks and up()
might even call wake_up_process().
In the panic() code path it gets even worse because the internal
spinlocks of the semaphore may have been taken by a CPU that has
been stopped.
To reduce the risk of deadlocks caused by the console semaphore in
the panic path, make the following changes:
- First check if any consoles have implemented the unblank()
callback. If not, then there is no reason to take the console
semaphore anyway. (This check is also useful for the non-panic
path since the locking/unlocking of the console lock can be
quite expensive due to console printing.)
- If the panic path is in NMI context, bail out without attempting
to take the console semaphore or calling any unblank() callbacks.
Bailing out is acceptable because console_unblank() would already
bail out if the console semaphore is contended. The alternative of
ignoring the console semaphore and calling the unblank() callbacks
anyway is a bad idea because these callbacks are also not NMI-safe.
If consoles with unblank() callbacks exist and console_unblank() is
called from a non-NMI panic context, it will still attempt a
down_trylock(). This could still result in a deadlock if one of the
stopped CPUs is holding the semaphore internal spinlock. But this
is a risk that the kernel has been (and continues to be) willing
to take.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230717194607.145135-3-john.ogness@linutronix.de
|
|
The read side of seqcount_latch consists of:
do {
seq = raw_read_seqcount_latch(&latch->seq);
...
} while (read_seqcount_latch_retry(&latch->seq, seq));
which is asymmetric in the raw_ department, and sure enough,
read_seqcount_latch_retry() includes (explicit) instrumentation where
raw_read_seqcount_latch() does not.
This inconsistency becomes a problem when trying to use it from
noinstr code. As such, fix it by renaming and re-implementing
raw_read_seqcount_latch_retry() without the instrumentation.
Specifically the instrumentation in question is kcsan_atomic_next(0)
in do___read_seqcount_retry(). Loosing this annotation is not a
problem because raw_read_seqcount_latch() does not pass through
kcsan_atomic_next(KCSAN_SEQLOCK_REGION_MAX).
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Tested-by: Michael Kelley <mikelley@microsoft.com> # Hyper-V
Link: https://lore.kernel.org/r/20230519102715.233598176@infradead.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Nick Piggin's "shoot lazy tlbs" series, to improve the peformance of
switching from a user process to a kernel thread.
- More folio conversions from Kefeng Wang, Zhang Peng and Pankaj
Raghav.
- zsmalloc performance improvements from Sergey Senozhatsky.
- Yue Zhao has found and fixed some data race issues around the
alteration of memcg userspace tunables.
- VFS rationalizations from Christoph Hellwig:
- removal of most of the callers of write_one_page()
- make __filemap_get_folio()'s return value more useful
- Luis Chamberlain has changed tmpfs so it no longer requires swap
backing. Use `mount -o noswap'.
- Qi Zheng has made the slab shrinkers operate locklessly, providing
some scalability benefits.
- Keith Busch has improved dmapool's performance, making part of its
operations O(1) rather than O(n).
- Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd,
permitting userspace to wr-protect anon memory unpopulated ptes.
- Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive
rather than exclusive, and has fixed a bunch of errors which were
caused by its unintuitive meaning.
- Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature,
which causes minor faults to install a write-protected pte.
- Vlastimil Babka has done some maintenance work on vma_merge():
cleanups to the kernel code and improvements to our userspace test
harness.
- Cleanups to do_fault_around() by Lorenzo Stoakes.
- Mike Rapoport has moved a lot of initialization code out of various
mm/ files and into mm/mm_init.c.
- Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for
DRM, but DRM doesn't use it any more.
- Lorenzo has also coverted read_kcore() and vread() to use iterators
and has thereby removed the use of bounce buffers in some cases.
- Lorenzo has also contributed further cleanups of vma_merge().
- Chaitanya Prakash provides some fixes to the mmap selftesting code.
- Matthew Wilcox changes xfs and afs so they no longer take sleeping
locks in ->map_page(), a step towards RCUification of pagefaults.
- Suren Baghdasaryan has improved mmap_lock scalability by switching to
per-VMA locking.
- Frederic Weisbecker has reworked the percpu cache draining so that it
no longer causes latency glitches on cpu isolated workloads.
- Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig
logic.
- Liu Shixin has changed zswap's initialization so we no longer waste a
chunk of memory if zswap is not being used.
- Yosry Ahmed has improved the performance of memcg statistics
flushing.
- David Stevens has fixed several issues involving khugepaged,
userfaultfd and shmem.
- Christoph Hellwig has provided some cleanup work to zram's IO-related
code paths.
- David Hildenbrand has fixed up some issues in the selftest code's
testing of our pte state changing.
- Pankaj Raghav has made page_endio() unneeded and has removed it.
- Peter Xu contributed some rationalizations of the userfaultfd
selftests.
- Yosry Ahmed has fixed an issue around memcg's page recalim
accounting.
- Chaitanya Prakash has fixed some arm-related issues in the
selftests/mm code.
- Longlong Xia has improved the way in which KSM handles hwpoisoned
pages.
- Peter Xu fixes a few issues with uffd-wp at fork() time.
- Stefan Roesch has changed KSM so that it may now be used on a
per-process and per-cgroup basis.
* tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits)
mm,unmap: avoid flushing TLB in batch if PTE is inaccessible
shmem: restrict noswap option to initial user namespace
mm/khugepaged: fix conflicting mods to collapse_file()
sparse: remove unnecessary 0 values from rc
mm: move 'mmap_min_addr' logic from callers into vm_unmapped_area()
hugetlb: pte_alloc_huge() to replace huge pte_alloc_map()
maple_tree: fix allocation in mas_sparse_area()
mm: do not increment pgfault stats when page fault handler retries
zsmalloc: allow only one active pool compaction context
selftests/mm: add new selftests for KSM
mm: add new KSM process and sysfs knobs
mm: add new api to enable ksm per process
mm: shrinkers: fix debugfs file permissions
mm: don't check VMA write permissions if the PTE/PMD indicates write permissions
migrate_pages_batch: fix statistics for longterm pin retry
userfaultfd: use helper function range_in_vma()
lib/show_mem.c: use for_each_populated_zone() simplify code
mm: correct arg in reclaim_pages()/reclaim_clean_pages_from_list()
fs/buffer: convert create_page_buffers to folio_create_buffers
fs/buffer: add folio_create_empty_buffers helper
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull module updates from Luis Chamberlain:
"The summary of the changes for this pull requests is:
- Song Liu's new struct module_memory replacement
- Nick Alcock's MODULE_LICENSE() removal for non-modules
- My cleanups and enhancements to reduce the areas where we vmalloc
module memory for duplicates, and the respective debug code which
proves the remaining vmalloc pressure comes from userspace.
Most of the changes have been in linux-next for quite some time except
the minor fixes I made to check if a module was already loaded prior
to allocating the final module memory with vmalloc and the respective
debug code it introduces to help clarify the issue. Although the
functional change is small it is rather safe as it can only *help*
reduce vmalloc space for duplicates and is confirmed to fix a bootup
issue with over 400 CPUs with KASAN enabled. I don't expect stable
kernels to pick up that fix as the cleanups would have also had to
have been picked up. Folks on larger CPU systems with modules will
want to just upgrade if vmalloc space has been an issue on bootup.
Given the size of this request, here's some more elaborate details:
The functional change change in this pull request is the very first
patch from Song Liu which replaces the 'struct module_layout' with a
new 'struct module_memory'. The old data structure tried to put
together all types of supported module memory types in one data
structure, the new one abstracts the differences in memory types in a
module to allow each one to provide their own set of details. This
paves the way in the future so we can deal with them in a cleaner way.
If you look at changes they also provide a nice cleanup of how we
handle these different memory areas in a module. This change has been
in linux-next since before the merge window opened for v6.3 so to
provide more than a full kernel cycle of testing. It's a good thing as
quite a bit of fixes have been found for it.
Jason Baron then made dynamic debug a first class citizen module user
by using module notifier callbacks to allocate / remove module
specific dynamic debug information.
Nick Alcock has done quite a bit of work cross-tree to remove module
license tags from things which cannot possibly be module at my request
so to:
a) help him with his longer term tooling goals which require a
deterministic evaluation if a piece a symbol code could ever be
part of a module or not. But quite recently it is has been made
clear that tooling is not the only one that would benefit.
Disambiguating symbols also helps efforts such as live patching,
kprobes and BPF, but for other reasons and R&D on this area is
active with no clear solution in sight.
b) help us inch closer to the now generally accepted long term goal
of automating all the MODULE_LICENSE() tags from SPDX license tags
In so far as a) is concerned, although module license tags are a no-op
for non-modules, tools which would want create a mapping of possible
modules can only rely on the module license tag after the commit
8b41fc4454e ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf").
Nick has been working on this *for years* and AFAICT I was the only
one to suggest two alternatives to this approach for tooling. The
complexity in one of my suggested approaches lies in that we'd need a
possible-obj-m and a could-be-module which would check if the object
being built is part of any kconfig build which could ever lead to it
being part of a module, and if so define a new define
-DPOSSIBLE_MODULE [0].
A more obvious yet theoretical approach I've suggested would be to
have a tristate in kconfig imply the same new -DPOSSIBLE_MODULE as
well but that means getting kconfig symbol names mapping to modules
always, and I don't think that's the case today. I am not aware of
Nick or anyone exploring either of these options. Quite recently Josh
Poimboeuf has pointed out that live patching, kprobes and BPF would
benefit from resolving some part of the disambiguation as well but for
other reasons. The function granularity KASLR (fgkaslr) patches were
mentioned but Joe Lawrence has clarified this effort has been dropped
with no clear solution in sight [1].
In the meantime removing module license tags from code which could
never be modules is welcomed for both objectives mentioned above. Some
developers have also welcomed these changes as it has helped clarify
when a module was never possible and they forgot to clean this up, and
so you'll see quite a bit of Nick's patches in other pull requests for
this merge window. I just picked up the stragglers after rc3. LWN has
good coverage on the motivation behind this work [2] and the typical
cross-tree issues he ran into along the way. The only concrete blocker
issue he ran into was that we should not remove the MODULE_LICENSE()
tags from files which have no SPDX tags yet, even if they can never be
modules. Nick ended up giving up on his efforts due to having to do
this vetting and backlash he ran into from folks who really did *not
understand* the core of the issue nor were providing any alternative /
guidance. I've gone through his changes and dropped the patches which
dropped the module license tags where an SPDX license tag was missing,
it only consisted of 11 drivers. To see if a pull request deals with a
file which lacks SPDX tags you can just use:
./scripts/spdxcheck.py -f \
$(git diff --name-only commid-id | xargs echo)
You'll see a core module file in this pull request for the above, but
that's not related to his changes. WE just need to add the SPDX
license tag for the kernel/module/kmod.c file in the future but it
demonstrates the effectiveness of the script.
Most of Nick's changes were spread out through different trees, and I
just picked up the slack after rc3 for the last kernel was out. Those
changes have been in linux-next for over two weeks.
The cleanups, debug code I added and final fix I added for modules
were motivated by David Hildenbrand's report of boot failing on a
systems with over 400 CPUs when KASAN was enabled due to running out
of virtual memory space. Although the functional change only consists
of 3 lines in the patch "module: avoid allocation if module is already
present and ready", proving that this was the best we can do on the
modules side took quite a bit of effort and new debug code.
The initial cleanups I did on the modules side of things has been in
linux-next since around rc3 of the last kernel, the actual final fix
for and debug code however have only been in linux-next for about a
week or so but I think it is worth getting that code in for this merge
window as it does help fix / prove / evaluate the issues reported with
larger number of CPUs. Userspace is not yet fixed as it is taking a
bit of time for folks to understand the crux of the issue and find a
proper resolution. Worst come to worst, I have a kludge-of-concept [3]
of how to make kernel_read*() calls for modules unique / converge
them, but I'm currently inclined to just see if userspace can fix this
instead"
Link: https://lore.kernel.org/all/Y/kXDqW+7d71C4wz@bombadil.infradead.org/ [0]
Link: https://lkml.kernel.org/r/025f2151-ce7c-5630-9b90-98742c97ac65@redhat.com [1]
Link: https://lwn.net/Articles/927569/ [2]
Link: https://lkml.kernel.org/r/20230414052840.1994456-3-mcgrof@kernel.org [3]
* tag 'modules-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (121 commits)
module: add debugging auto-load duplicate module support
module: stats: fix invalid_mod_bytes typo
module: remove use of uninitialized variable len
module: fix building stats for 32-bit targets
module: stats: include uapi/linux/module.h
module: avoid allocation if module is already present and ready
module: add debug stats to help identify memory pressure
module: extract patient module check into helper
modules/kmod: replace implementation with a semaphore
Change DEFINE_SEMAPHORE() to take a number argument
module: fix kmemleak annotations for non init ELF sections
module: Ignore L0 and rename is_arm_mapping_symbol()
module: Move is_arm_mapping_symbol() to module_symbol.h
module: Sync code of is_arm_mapping_symbol()
scripts/gdb: use mem instead of core_layout to get the module address
interconnect: remove module-related code
interconnect: remove MODULE_LICENSE in non-modules
zswap: remove MODULE_LICENSE in non-modules
zpool: remove MODULE_LICENSE in non-modules
x86/mm/dump_pagetables: remove MODULE_LICENSE in non-modules
...
|
|
The console tracepoint is used by kcsan/kasan/kfence/kmsan test modules.
Since this tracepoint is not exported, these modules iterate over all
available tracepoints to find the console trace point. Export the trace
point so that it can be directly used.
Link: https://lkml.kernel.org/r/20230413100859.1492323-1-quic_pkondeti@quicinc.com
Signed-off-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Marco Elver <elver@google.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Fundamentally semaphores are a counted primitive, but
DEFINE_SEMAPHORE() does not expose this and explicitly creates a
binary semaphore.
Change DEFINE_SEMAPHORE() to take a number argument and use that in the
few places that open-coded it using __SEMAPHORE_INITIALIZER().
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
[mcgrof: add some tribal knowledge about why some folks prefer
binary sempahores over mutexes]
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
The original check for non-null "user" object was introduced by commit
e11fea92e13f ("kmsg: export printk records to the /dev/kmsg interface")
when "user" could be NULL if /dev/ksmg was opened for writing.
Subsequent change 750afe7babd1 ("printk: add kernel parameter to control
writes to /dev/kmsg") made "user" context required for files opened for
write, but didn't remove now redundant checks for it to be non-NULL.
This patch removes the dead code while preserving the current logic.
Signed-off-by: Stanislav Kinsburskii <stanislav.kinsburski@gmail.com>
CC: Petr Mladek <pmladek@suse.com>
CC: Sergey Senozhatsky <senozhatsky@chromium.org>
CC: Steven Rostedt <rostedt@goodmis.org>
CC: John Ogness <john.ogness@linutronix.de>
CC: linux-kernel@vger.kernel.org
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/167929571877.2810.9926967619100618792.stgit@skinsburskii.localdomain
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Refactor printk code for formatting messages that are shown on
consoles. This is a preparatory step for introducing atomic consoles
which could not share the global buffers
- Prevent memory leak when removing printk index in debugfs
- Dump also the newest printk message by the sample gdbmacro
- Fix a compiler warning
* tag 'printk-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printf: fix errname.c list
kernel/printk/index.c: fix memory leak with using debugfs_lookup()
printk: Use scnprintf() to print the message about the dropped messages on a console
printk: adjust string limit macros
printk: use printk_buffers for devkmsg
printk: introduce console_prepend_dropped() for dropped messages
printk: introduce printk_get_next_message() and printk_message
printk: introduce struct printk_buffers
console: Document struct console
console: Use BIT() macros for @flags values
printk: move size limit macros into internal.h
docs: gdbmacros: print newest record
|
|
|
|
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once.
Cc: Chris Down <chris@chrisdown.name>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230202151411.2308576-1-gregkh@linuxfoundation.org
|
|
Pick up fixes before merging another batch of cpuidle updates.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
|
|
console
Use scnprintf() for printing the message about dropped messages on
a console. It returns the really written length of the message.
It prevents potential buffer overflow when the returned length is
later used to copy the buffer content.
Note that the previous code was safe because the scratch buffer was
big enough and the message always fit in. But scnprintf() makes
it more safe, definitely.
Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 1530570 ("Memory - corruptions")
Fixes: c4fcc617e148 ("printk: introduce console_prepend_dropped() for dropped messages")
Link: https://lore.kernel.org/r/202301131544.D9E804CCD@keescook
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230117161031.15499-1-pmladek@suse.com
|
|
Fix W=1 kernel-doc warning:
kernel/printk/printk.c:
- Include function parameter in console_lock_spinning_disable_and_check()
Signed-off-by: Anuradha Weeraman <anuradha@debian.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230116125635.374567-1-anuradha@debian.org
|
|
Several mutexes are taken while setting up console serial ports. In
particular, the tty_port->mutex and @console_mutex are taken:
serial_pnp_probe
serial8250_register_8250_port
uart_add_one_port (locks tty_port->mutex)
uart_configure_port
register_console (locks @console_mutex)
In order to synchronize kgdb's tty_find_polling_driver() with
register_console(), commit 6193bc90849a ("tty: serial: kgdboc:
synchronize tty_find_polling_driver() and register_console()") takes
the @console_mutex. However, this leads to the following call chain
(with locking):
platform_probe
kgdboc_probe
configure_kgdboc (locks @console_mutex)
tty_find_polling_driver
uart_poll_init (locks tty_port->mutex)
uart_set_options
This is clearly deadlock potential due to the reverse lock ordering.
Since uart_set_options() requires holding @console_mutex in order to
serialize early initialization of the serial-console lock, take the
@console_mutex in uart_poll_init() instead of configure_kgdboc().
Since configure_kgdboc() was using @console_mutex for safe traversal
of the console list, change it to use the SRCU iterator instead.
Add comments to uart_set_options() kerneldoc mentioning that it
requires holding @console_mutex (aka the console_list_lock).
Fixes: 6193bc90849a ("tty: serial: kgdboc: synchronize tty_find_polling_driver() and register_console()")
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
[pmladek@suse.com: Export console_srcu_read_lock_is_held() to fix build kgdboc as a module.]
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230112161213.1434854-1-john.ogness@linutronix.de
|
|
The problem, per commit fc98c3c8c9dc ("printk: use rcuidle console
tracepoint"), was printk usage from the cpuidle path where RCU was
already disabled.
Per the patches earlier in this series, this is no longer the case.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Petr Mladek <pmladek@suse.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195540.865735001@infradead.org
|
|
The various internal size limit macros have names and/or values that
do not fit well to their current usage.
Rename the macros so that their purpose is clear and, if needed,
provide a more appropriate value. In general, the new macros and
values will lead to less memory usage. The new macros are...
PRINTK_MESSAGE_MAX:
This is the maximum size for a formatted message on a console,
devkmsg, or syslog. It does not matter which format the message has
(normal or extended). It replaces the use of CONSOLE_EXT_LOG_MAX for
console and devkmsg. It replaces the use of CONSOLE_LOG_MAX for
syslog.
Historically, normal messages have been allowed to print up to 1kB,
whereas extended messages have been allowed to print up to 8kB.
However, the difference in lengths of these message types is not
significant and in multi-line records, normal messages are probably
larger. Also, because 1kB is only slightly above the allowed record
size, multi-line normal messages could be easily truncated during
formatting.
This new macro should be significantly larger than the allowed
record size to allow sufficient space for extended or multi-line
prefix text. A value of 2kB should be plenty of space. For normal
messages this represents a doubling of the historically allowed
amount. For extended messages it reduces the excessive 8kB size,
thus reducing memory usage needed for message formatting.
PRINTK_PREFIX_MAX:
This is the maximum size allowed for a record prefix (used by
console and syslog). It replaces PREFIX_MAX. The value is left
unchanged.
PRINTKRB_RECORD_MAX:
This is the maximum size allowed to be reserved for a record in the
ringbuffer. It is used by all readers and writers with the printk
ringbuffer. It replaces LOG_LINE_MAX.
Previously this was set to "1kB - PREFIX_MAX", which makes some
sense if 1kB is the limit for normal message output and prefixes are
enabled. However, with the allowance of larger output and the
existence of multi-line records, the value is rather bizarre.
Round the value up to 1kB.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230109100800.1085541-9-john.ogness@linutronix.de
|
|
Replace the buffers in struct devkmsg_user with a struct
printk_buffers. This reduces the number of buffers to keep track of.
As a side-effect, @text_buf was 8kB large, even though it only
needed to be the max size of a ringbuffer record. By switching to
struct printk_buffers, ~7kB less memory is allocated when opening
/dev/kmsg.
And since struct printk_buffers will be used now, reduce duplicate
code by calling printk_get_next_message() to handle the record
reading and formatting.
Note that since /dev/kmsg never suppresses records based on
loglevel, printk_get_next_message() is extended with an extra
bool argument to specify if suppression is allowed.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230109100800.1085541-8-john.ogness@linutronix.de
|
|
Currently "dropped messages" are separately printed immediately
before printing the printk message. Since normal consoles are
now using an output buffer that is much larger than previously,
the "dropped message" could be prepended to the printk message
and then output everything in a single write() call.
Introduce a helper function console_prepend_dropped() to prepend
an existing message with a "dropped message". This simplifies
the code by allowing all message formatting to be handled
together and then only requires a single write() call to output
the full message. And since this helper does not require any
locking, it can be used in the future for other console printing
contexts as well.
Note that console_prepend_dropped() is defined as a NOP for
!CONFIG_PRINTK. Although the function will never be called for
!CONFIG_PRINTK, compiling the function can lead to warnings of
"always true" conditionals due to the size macro values used
in !CONFIG_PRINTK.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230109100800.1085541-7-john.ogness@linutronix.de
|
|
Code for performing the console output is intermixed with code that
is formatting the output for that console. Introduce a new helper
function printk_get_next_message() to handle the reading and
formatting of the printk text. The helper does not require any
locking so that in the future it can be used for other printing
contexts as well.
This also introduces a new struct printk_message to wrap the struct
printk_buffers, adding metadata about its contents. This allows
users of printk_get_next_message() to receive all relevant
information about the message that was read and formatted.
Why is struct printk_message a wrapper struct?
It is intentional that a wrapper struct is introduced instead of
adding the metadata directly to struct printk_buffers. The upcoming
atomic consoles support multiple printing contexts per CPU. This
means that while a CPU is formatting a message, it can be
interrupted and the interrupting context may also format a (possibly
different) message. Since the printk buffers are rather large,
there will only be one struct printk_buffers per CPU and it must be
shared by the possible contexts of that CPU.
If the metadata was part of struct printk_buffers, interrupting
contexts would clobber the metadata being prepared by the
interrupted context. This could be handled by robustifying the
message formatting functions to cope with metadata unexpectedly
changing. However, this would require significant amounts of extra
data copying, also adding significant complexity to the code.
Instead, the metadata can live on the stack of the formatting
context and the message formatting functions do not need to be
concerned about the metadata changing underneath them.
Note that the message formatting functions can handle unexpected
text buffer changes. So it is perfectly OK if a shared text buffer
is clobbered by an interrupting context. The atomic console
implementation will recognize the interruption and avoid printing
the (probably garbage) text buffer.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230109100800.1085541-6-john.ogness@linutronix.de
|
|
Introduce a new struct printk_buffers to contain all the buffers
needed to read and format a printk message for output. Putting the
buffers inside a struct reduces the number of buffer pointers that
need to be tracked. Also, it allows usage of the sizeof() macro for
the buffer sizes, rather than expecting certain sized buffers being
passed in.
Note that since the output buffer for normal consoles is now
CONSOLE_EXT_LOG_MAX instead of CONSOLE_LOG_MAX, multi-line
messages that may have been previously truncated will now be
printed in full. This should be considered a feature and not a bug
since the CONSOLE_LOG_MAX restriction was about limiting static
buffer usage rather than limiting printed text.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230109100800.1085541-5-john.ogness@linutronix.de
|