summaryrefslogtreecommitdiff
path: root/kernel/tracepoint.c
AgeCommit message (Collapse)AuthorFilesLines
2022-09-26tracepoint: Optimize the critical region of mutex_lock in ↵Zhen Lei1-8/+6
tracepoint_module_coming() The memory allocation of 'tp_mod' does not require mutex_lock() protection, move it out. Link: https://lkml.kernel.org/r/20220914061416.1630-1-thunder.leizhen@huawei.com Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-09-07tracepoint: Allow trace events in modules with TAINT_TESTAlison Schofield1-2/+3
Commit 2852ca7fba9f ("panic: Taint kernel if tests are run") introduced a new taint type, TAINT_TEST, to signal that an in-kernel test module has been loaded. TAINT_TEST taint type defaults into a 'bad_taint' list for kernel tracing and blocks the creation of trace events. This causes a problem for CXL testing where loading the cxl_test module makes all CXL modules out-of-tree, blocking any trace events. Trace events are in development for CXL at the moment and this issue was found in test with v6.0-rc1. Link: https://lkml.kernel.org/r/20220829171048.263065-1-alison.schofield@intel.com Fixes: 2852ca7fba9f7 ("panic: Taint kernel if tests are run") Reported-by: Ira Weiny <ira.weiny@intel.com> Suggested-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Alison Schofield <alison.schofield@intel.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2021-08-16tracepoint: Fix kerneldoc commentszhaoxiao1-2/+2
Fix function name in tracepoint.c kernel-doc comment to remove a warning found by clang_w1. kernel/tracepoint.c:589: warning: expecting prototype for register_tracepoint_notifier(). Prototype was for register_tracepoint_module_notifier() instead kernel/tracepoint.c:613: warning: expecting prototype for unregister_tracepoint_notifier(). Prototype was for unregister_tracepoint_module_notifier() instead Link: https://lkml.kernel.org/r/20210816052430.16539-1-zhaoxiao@uniontech.com Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: zhaoxiao <zhaoxiao@uniontech.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-08-06tracepoint: Use rcu get state and cond sync for static call updatesMathieu Desnoyers1-14/+67
State transitions from 1->0->1 and N->2->1 callbacks require RCU synchronization. Rather than performing the RCU synchronization every time the state change occurs, which is quite slow when many tracepoints are registered in batch, instead keep a snapshot of the RCU state on the most recent transitions which belong to a chain, and conditionally wait for a grace period on the last transition of the chain if one g.p. has not elapsed since the last snapshot. This applies to both RCU and SRCU. This brings the performance regression caused by commit 231264d6927f ("Fix: tracepoint: static call function vs data state mismatch") back to what it was originally. Before this commit: # trace-cmd start -e all # time trace-cmd start -p nop real 0m10.593s user 0m0.017s sys 0m0.259s After this commit: # trace-cmd start -e all # time trace-cmd start -p nop real 0m0.878s user 0m0.000s sys 0m0.103s Link: https://lkml.kernel.org/r/20210805192954.30688-1-mathieu.desnoyers@efficios.com Link: https://lore.kernel.org/io-uring/4ebea8f0-58c9-e571-fd30-0ce4f6f09c70@samba.org/ Cc: stable@vger.kernel.org Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: Stefan Metzmacher <metze@samba.org> Fixes: 231264d6927f ("Fix: tracepoint: static call function vs data state mismatch") Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Reviewed-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-08-05tracepoint: Fix static call function vs data state mismatchMathieu Desnoyers1-20/+82
On a 1->0->1 callbacks transition, there is an issue with the new callback using the old callback's data. Considering __DO_TRACE_CALL: do { \ struct tracepoint_func *it_func_ptr; \ void *__data; \ it_func_ptr = \ rcu_dereference_raw((&__tracepoint_##name)->funcs); \ if (it_func_ptr) { \ __data = (it_func_ptr)->data; \ ----> [ delayed here on one CPU (e.g. vcpu preempted by the host) ] static_call(tp_func_##name)(__data, args); \ } \ } while (0) It has loaded the tp->funcs of the old callback, so it will try to use the old data. This can be fixed by adding a RCU sync anywhere in the 1->0->1 transition chain. On a N->2->1 transition, we need an rcu-sync because you may have a sequence of 3->2->1 (or 1->2->1) where the element 0 data is unchanged between 2->1, but was changed from 3->2 (or from 1->2), which may be observed by the static call. This can be fixed by adding an unconditional RCU sync in transition 2->1. Note, this fixes a correctness issue at the cost of adding a tremendous performance regression to the disabling of tracepoints. Before this commit: # trace-cmd start -e all # time trace-cmd start -p nop real 0m0.778s user 0m0.000s sys 0m0.061s After this commit: # trace-cmd start -e all # time trace-cmd start -p nop real 0m10.593s user 0m0.017s sys 0m0.259s A follow up fix will introduce a more lightweight scheme based on RCU get_state and cond_sync, that will return the performance back to what it was. As both this change and the lightweight versions are complex on their own, for bisecting any issues that this may cause, they are kept as two separate changes. Link: https://lkml.kernel.org/r/20210805132717.23813-3-mathieu.desnoyers@efficios.com Link: https://lore.kernel.org/io-uring/4ebea8f0-58c9-e571-fd30-0ce4f6f09c70@samba.org/ Cc: stable@vger.kernel.org Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: Stefan Metzmacher <metze@samba.org> Fixes: d25e37d89dd2 ("tracepoint: Optimize using static_call()") Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-08-05tracepoint: static call: Compare data on transition from 2->1 calleesMathieu Desnoyers1-1/+1
On transition from 2->1 callees, we should be comparing .data rather than .func, because the same callback can be registered twice with different data, and what we care about here is that the data of array element 0 is unchanged to skip rcu sync. Link: https://lkml.kernel.org/r/20210805132717.23813-2-mathieu.desnoyers@efficios.com Link: https://lore.kernel.org/io-uring/4ebea8f0-58c9-e571-fd30-0ce4f6f09c70@samba.org/ Cc: stable@vger.kernel.org Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: Stefan Metzmacher <metze@samba.org> Fixes: 547305a64632 ("tracepoint: Fix out of sync data passing by static caller") Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-07-23tracepoints: Update static_call before tp_funcs when adding a tracepointSteven Rostedt (VMware)1-1/+1
Because of the significant overhead that retpolines pose on indirect calls, the tracepoint code was updated to use the new "static_calls" that can modify the running code to directly call a function instead of using an indirect caller, and this function can be changed at runtime. In the tracepoint code that calls all the registered callbacks that are attached to a tracepoint, the following is done: it_func_ptr = rcu_dereference_raw((&__tracepoint_##name)->funcs); if (it_func_ptr) { __data = (it_func_ptr)->data; static_call(tp_func_##name)(__data, args); } If there's just a single callback, the static_call is updated to just call that callback directly. Once another handler is added, then the static caller is updated to call the iterator, that simply loops over all the funcs in the array and calls each of the callbacks like the old method using indirect calling. The issue was discovered with a race between updating the funcs array and updating the static_call. The funcs array was updated first and then the static_call was updated. This is not an issue as long as the first element in the old array is the same as the first element in the new array. But that assumption is incorrect, because callbacks also have a priority field, and if there's a callback added that has a higher priority than the callback on the old array, then it will become the first callback in the new array. This means that it is possible to call the old callback with the new callback data element, which can cause a kernel panic. static_call = callback1() funcs[] = {callback1,data1}; callback2 has higher priority than callback1 CPU 1 CPU 2 ----- ----- new_funcs = {callback2,data2}, {callback1,data1} rcu_assign_pointer(tp->funcs, new_funcs); /* * Now tp->funcs has the new array * but the static_call still calls callback1 */ it_func_ptr = tp->funcs [ new_funcs ] data = it_func_ptr->data [ data2 ] static_call(callback1, data); /* Now callback1 is called with * callback2's data */ [ KERNEL PANIC ] update_static_call(iterator); To prevent this from happening, always switch the static_call to the iterator before assigning the tp->funcs to the new array. The iterator will always properly match the callback with its data. To trigger this bug: In one terminal: while :; do hackbench 50; done In another terminal echo 1 > /sys/kernel/tracing/events/sched/sched_waking/enable while :; do echo 1 > /sys/kernel/tracing/set_event_pid; sleep 0.5 echo 0 > /sys/kernel/tracing/set_event_pid; sleep 0.5 done And it doesn't take long to crash. This is because the set_event_pid adds a callback to the sched_waking tracepoint with a high priority, which will be called before the sched_waking trace event callback is called. Note, the removal to a single callback updates the array first, before changing the static_call to single callback, which is the proper order as the first element in the array is the same as what the static_call is being changed to. Link: https://lore.kernel.org/io-uring/4ebea8f0-58c9-e571-fd30-0ce4f6f09c70@samba.org/ Cc: stable@vger.kernel.org Fixes: d25e37d89dd2f ("tracepoint: Optimize using static_call()") Reported-by: Stefan Metzmacher <metze@samba.org> tested-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-06-29tracepoint: Add tracepoint_probe_register_may_exist() for BPF tracingSteven Rostedt (VMware)1-3/+30
All internal use cases for tracepoint_probe_register() is set to not ever be called with the same function and data. If it is, it is considered a bug, as that means the accounting of handling tracepoints is corrupted. If the function and data for a tracepoint is already registered when tracepoint_probe_register() is called, it will call WARN_ON_ONCE() and return with EEXISTS. The BPF system call can end up calling tracepoint_probe_register() with the same data, which now means that this can trigger the warning because of a user space process. As WARN_ON_ONCE() should not be called because user space called a system call with bad data, there needs to be a way to register a tracepoint without triggering a warning. Enter tracepoint_probe_register_may_exist(), which can be called, but will not cause a WARN_ON() if the probe already exists. It will still error out with EEXIST, which will then be sent to the user space that performed the BPF system call. This keeps the previous testing for issues with other users of the tracepoint code, while letting BPF call it with duplicated data and not warn about it. Link: https://lore.kernel.org/lkml/20210626135845.4080-1-penguin-kernel@I-love.SAKURA.ne.jp/ Link: https://syzkaller.appspot.com/bug?id=41f4318cf01762389f4d1c1c459da4f542fe5153 Cc: stable@vger.kernel.org Fixes: c4f6699dfcb85 ("bpf: introduce BPF_RAW_TRACEPOINT") Reported-by: syzbot <syzbot+721aa903751db87aa244@syzkaller.appspotmail.com> Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Tested-by: syzbot+721aa903751db87aa244@syzkaller.appspotmail.com Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-02-09tracepoints: Code clean upSteven Rostedt (VMware)1-56/+35
Restructure the code a bit to make it simpler, fix some formatting problems and add READ_ONCE/WRITE_ONCE to make sure there's no compiler load/store tearing to the variables that can be accessed across CPUs. Started with Mathieu Desnoyers's patch: Link: https://lore.kernel.org/lkml/20210203175741.20665-1-mathieu.desnoyers@efficios.com/ And will keep his signature, but I will take the responsibility of this being correct, and keep the authorship. Link: https://lkml.kernel.org/r/20210204143004.61126582@gandalf.local.home Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-02-03tracepoint: Do not fail unregistering a probe due to memory failureSteven Rostedt (VMware)1-16/+64
The list of tracepoint callbacks is managed by an array that is protected by RCU. To update this array, a new array is allocated, the updates are copied over to the new array, and then the list of functions for the tracepoint is switched over to the new array. After a completion of an RCU grace period, the old array is freed. This process happens for both adding a callback as well as removing one. But on removing a callback, if the new array fails to be allocated, the callback is not removed, and may be used after it is freed by the clients of the tracepoint. There's really no reason to fail if the allocation for a new array fails when removing a function. Instead, the function can simply be replaced by a stub function that could be cleaned up on the next modification of the array. That is, instead of calling the function registered to the tracepoint, it would call a stub function in its place. Link: https://lore.kernel.org/r/20201115055256.65625-1-mmullins@mmlx.us Link: https://lore.kernel.org/r/20201116175107.02db396d@gandalf.local.home Link: https://lore.kernel.org/r/20201117211836.54acaef2@oasis.local.home Link: https://lkml.kernel.org/r/20201118093405.7a6d2290@gandalf.local.home [ Note, this version does use undefined compiler behavior (assuming that a stub function with no parameters or return, can be called by a location that thinks it has parameters but still no return value. Static calls do the same thing, so this trick is not without precedent. There's another solution that uses RCU tricks and is more complex, but can be an alternative if this solution becomes an issue. Link: https://lore.kernel.org/lkml/20210127170721.58bce7cc@gandalf.local.home/ ] Cc: Peter Zijlstra <peterz@infradead.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Song Liu <songliubraving@fb.com> Cc: Yonghong Song <yhs@fb.com> Cc: Andrii Nakryiko <andriin@fb.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: KP Singh <kpsingh@chromium.org> Cc: netdev <netdev@vger.kernel.org> Cc: bpf <bpf@vger.kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Florian Weimer <fw@deneb.enyo.de> Fixes: 97e1c18e8d17b ("tracing: Kernel Tracepoints") Reported-by: syzbot+83aa762ef23b6f0d1991@syzkaller.appspotmail.com Reported-by: syzbot+d29e58bb557324e55e5e@syzkaller.appspotmail.com Reported-by: Matt Mullins <mmullins@mmlx.us> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Tested-by: Matt Mullins <mmullins@mmlx.us>
2020-11-16tracepoints: Migrate to use SYSCALL_WORK flagGabriel Krisman Bertazi1-2/+2
On architectures using the generic syscall entry code the architecture independent syscall work is moved to flags in thread_info::syscall_work. This removes architecture dependencies and frees up TIF bits. Define SYSCALL_WORK_SYSCALL_TRACEPOINT, use it in the generic entry code and convert the code which uses the TIF specific helper functions to use the new *_syscall_work() helpers which either resolve to the new mode for users of the generic entry code or to the TIF based functions for the other architectures. Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20201116174206.2639648-6-krisman@collabora.com
2020-10-30tracepoint: Replace zero-length array with flexible-array memberGustavo A. R. Silva1-1/+1
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-10-02tracepoint: Fix out of sync data passing by static callerSteven Rostedt (VMware)1-6/+16
Naresh reported a bug that appears to be a side effect of the static calls. It happens when going from more than one tracepoint callback to a single one, and removing the first callback on the list. The list of tracepoint callbacks holds data and a function to call with the parameters of that tracepoint and a handler to the associated data. old_list: 0: func = foo; data = NULL; 1: func = bar; data = &bar_struct; new_list: 0: func = bar; data = &bar_struct; CPU 0 CPU 1 ----- ----- tp_funcs = old_list; tp_static_caller = tp_interator __DO_TRACE() data = tp_funcs[0].data = NULL; tp_funcs = new_list; tracepoint_update_call() tp_static_caller = tp_funcs[0] = bar; tp_static_caller(data) bar(data) x = data->item = NULL->item BOOM! To solve this, add a tracepoint_synchronize_unregister() between changing tp_funcs and updating the static tracepoint, that does both a synchronize_rcu() and synchronize_srcu(). This will ensure that when the static call is updated to the single callback that it will be receiving the data that it registered with. Fixes: d25e37d89dd2f ("tracepoint: Optimize using static_call()") Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/linux-next/CA+G9fYvPXVRO0NV7yL=FxCmFEMYkCwdz7R=9W+_votpT824YJA@mail.gmail.com
2020-09-01tracepoint: Optimize using static_call()Steven Rostedt (VMware)1-4/+21
Currently the tracepoint site will iterate a vector and issue indirect calls to however many handlers are registered (ie. the vector is long). Using static_call() it is possible to optimize this for the common case of only having a single handler registered. In this case the static_call() can directly call this handler. Otherwise, if the vector is longer than 1, call a function that iterates the whole vector like the current code. [peterz: updated to new interface] Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/20200818135805.279421092@infradead.org
2020-09-01module: Fix up module_notifier return valuesPeter Zijlstra1-1/+1
While auditing all module notifiers I noticed a whole bunch of fail wrt the return value. Notifiers have a 'special' return semantics. As is; NOTIFY_DONE vs NOTIFY_OK is a bit vague; but notifier_from_errno(0) results in NOTIFY_OK and NOTIFY_DONE has a comment that says "Don't care". From this I've used NOTIFY_DONE when the function completely ignores the callback and notifier_to_error() isn't used. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org> Reviewed-by: Robert Richter <rric@kernel.org> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: https://lore.kernel.org/r/20200818135804.385360407@infradead.org
2019-07-18Merge tag 'trace-v5.3' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: "The main changes in this release include: - Add user space specific memory reading for kprobes - Allow kprobes to be executed earlier in boot The rest are mostly just various clean ups and small fixes" * tag 'trace-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (33 commits) tracing: Make trace_get_fields() global tracing: Let filter_assign_type() detect FILTER_PTR_STRING tracing: Pass type into tracing_generic_entry_update() ftrace/selftest: Test if set_event/ftrace_pid exists before writing ftrace/selftests: Return the skip code when tracing directory not configured in kernel tracing/kprobe: Check registered state using kprobe tracing/probe: Add trace_event_call accesses APIs tracing/probe: Add probe event name and group name accesses APIs tracing/probe: Add trace flag access APIs for trace_probe tracing/probe: Add trace_event_file access APIs for trace_probe tracing/probe: Add trace_event_call register API for trace_probe tracing/probe: Add trace_probe init and free functions tracing/uprobe: Set print format when parsing command tracing/kprobe: Set print format right after parsed command kprobes: Fix to init kprobes in subsys_initcall tracepoint: Use struct_size() in kmalloc() ring-buffer: Remove HAVE_64BIT_ALIGNED_ACCESS ftrace: Enable trampoline when rec count returns back to one tracing/kprobe: Do not run kprobe boot tests if kprobe_event is on cmdline tracing: Make a separate config for trace event self tests ...
2019-06-18tracepoint: Use struct_size() in kmalloc()Gustavo A. R. Silva1-2/+2
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct tp_probes { ... struct tracepoint_func probes[0]; }; instance = kmalloc(sizeof(sizeof(struct tp_probes) + sizeof(struct tracepoint_func) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kmalloc(struct_size(instance, probes, count) GFP_KERNEL); This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156Thomas Gleixner1-14/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1334 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-27tracing: Replace synchronize_sched() and call_rcu_sched()Paul E. McKenney1-2/+2
Now that synchronize_rcu() waits for preempt-disable regions of code as well as RCU read-side critical sections, synchronize_sched() can be replaced by synchronize_rcu(). Similarly, call_rcu_sched() can be replaced by call_rcu(). This commit therefore makes these changes. Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: <linux-kernel@vger.kernel.org> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-10-17tracepoint: Fix tracepoint array element size mismatchMathieu Desnoyers1-16/+8
commit 46e0c9be206f ("kernel: tracepoints: add support for relative references") changes the layout of the __tracepoint_ptrs section on architectures supporting relative references. However, it does so without turning struct tracepoint * const into const int elsewhere in the tracepoint code, which has the following side-effect: Setting mod->num_tracepoints is done in by module.c: mod->tracepoints_ptrs = section_objs(info, "__tracepoints_ptrs", sizeof(*mod->tracepoints_ptrs), &mod->num_tracepoints); Basically, since sizeof(*mod->tracepoints_ptrs) is a pointer size (rather than sizeof(int)), num_tracepoints is erroneously set to half the size it should be on 64-bit arch. So a module with an odd number of tracepoints misses the last tracepoint due to effect of integer division. So in the module going notifier: for_each_tracepoint_range(mod->tracepoints_ptrs, mod->tracepoints_ptrs + mod->num_tracepoints, tp_module_going_check_quiescent, NULL); the expression (mod->tracepoints_ptrs + mod->num_tracepoints) actually evaluates to something within the bounds of the array, but miss the last tracepoint if the number of tracepoints is odd on 64-bit arch. Fix this by introducing a new typedef: tracepoint_ptr_t, which is either "const int" on architectures that have PREL32 relocations, or "struct tracepoint * const" on architectures that does not have this feature. Also provide a new tracepoint_ptr_defer() static inline to encapsulate deferencing this type rather than duplicate code and ugly idefs within the for_each_tracepoint_range() implementation. This issue appears in 4.19-rc kernels, and should ideally be fixed before the end of the rc cycle. Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Jessica Yu <jeyu@kernel.org> Link: http://lkml.kernel.org/r/20181013191050.22389-1-mathieu.desnoyers@efficios.com Link: http://lkml.kernel.org/r/20180704083651.24360-7-ard.biesheuvel@linaro.org Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Ingo Molnar <mingo@kernel.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: James Morris <james.morris@microsoft.com> Cc: James Morris <jmorris@namei.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Nicolas Pitre <nico@linaro.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Russell King <linux@armlinux.org.uk> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Thomas Garnier <thgarnie@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-08-22kernel: tracepoints: add support for relative referencesArd Biesheuvel1-23/+26
To avoid the need for relocating absolute references to tracepoint structures at boot time when running relocatable kernels (which may take a disproportionate amount of space), add the option to emit these tables as relative references instead. Link: http://lkml.kernel.org/r/20180704083651.24360-7-ard.biesheuvel@linaro.org Acked-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: James Morris <james.morris@microsoft.com> Cc: James Morris <jmorris@namei.org> Cc: Jessica Yu <jeyu@kernel.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Nicolas Pitre <nico@linaro.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Russell King <linux@armlinux.org.uk> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Thomas Garnier <thgarnie@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-10tracepoints: Free early tracepoints after RCU is initializedSteven Rostedt (VMware)1-0/+32
When enabling trace events via the kernel command line, I hit this warning: WARNING: CPU: 0 PID: 13 at kernel/rcu/srcutree.c:236 check_init_srcu_struct+0xe/0x61 Modules linked in: CPU: 0 PID: 13 Comm: watchdog/0 Not tainted 4.18.0-rc6-test+ #6 Hardware name: MSI MS-7823/CSM-H87M-G43 (MS-7823), BIOS V1.6 02/22/2014 RIP: 0010:check_init_srcu_struct+0xe/0x61 Code: 48 c7 c6 ec 8a 65 b4 e8 ff 79 fe ff 48 89 df 31 f6 e8 f2 fa ff ff 5a 5b 41 5c 5d c3 0f 1f 44 00 00 83 3d 68 94 b8 01 01 75 02 <0f> 0b 48 8b 87 f0 0a 00 00 a8 03 74 45 55 48 89 e5 41 55 41 54 4c RSP: 0000:ffff96eb9ea03e68 EFLAGS: 00010246 RAX: ffff96eb962b5b01 RBX: ffffffffb4a87420 RCX: 0000000000000001 RDX: ffffffffb3107969 RSI: ffff96eb962b5b40 RDI: ffffffffb4a87420 RBP: ffff96eb9ea03eb0 R08: ffffabbd00cd7f48 R09: 0000000000000000 R10: ffff96eb9ea03e68 R11: ffffffffb4a6eec0 R12: ffff96eb962b5b40 R13: ffff96eb9ea03ef8 R14: ffffffffb3107969 R15: ffffffffb3107948 FS: 0000000000000000(0000) GS:ffff96eb9ea00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff96eb13ab2000 CR3: 0000000192a1e001 CR4: 00000000001606f0 Call Trace: <IRQ> ? __call_srcu+0x2d/0x290 ? rcu_process_callbacks+0x26e/0x448 ? allocate_probes+0x2b/0x2b call_srcu+0x13/0x15 rcu_free_old_probes+0x1f/0x21 rcu_process_callbacks+0x2ed/0x448 __do_softirq+0x172/0x336 irq_exit+0x62/0xb2 smp_apic_timer_interrupt+0x161/0x19e apic_timer_interrupt+0xf/0x20 </IRQ> The problem is that the enabling of trace events before RCU is set up will cause SRCU to give this warning. To avoid this, add a list to store probes that need to be freed till after RCU is initialized, and then free them then. Link: http://lkml.kernel.org/r/20180810113554.1df28050@gandalf.local.home Link: http://lkml.kernel.org/r/20180810123517.5e9714ad@gandalf.local.home Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org> Fixes: e6753f23d961d ("tracepoint: Make rcuidle tracepoint callers use SRCU") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-07-31tracepoint: Make rcuidle tracepoint callers use SRCUJoel Fernandes (Google)1-1/+15
In recent tests with IRQ on/off tracepoints, a large performance overhead ~10% is noticed when running hackbench. This is root caused to calls to rcu_irq_enter_irqson and rcu_irq_exit_irqson from the tracepoint code. Following a long discussion on the list [1] about this, we concluded that srcu is a better alternative for use during rcu idle. Although it does involve extra barriers, its lighter than the sched-rcu version which has to do additional RCU calls to notify RCU idle about entry into RCU sections. In this patch, we change the underlying implementation of the trace_*_rcuidle API to use SRCU. This has shown to improve performance alot for the high frequency irq enable/disable tracepoints. Test: Tested idle and preempt/irq tracepoints. Here are some performance numbers: With a run of the following 30 times on a single core x86 Qemu instance with 1GB memory: hackbench -g 4 -f 2 -l 3000 Completion times in seconds. CONFIG_PROVE_LOCKING=y. No patches (without this series) Mean: 3.048 Median: 3.025 Std Dev: 0.064 With Lockdep using irq tracepoints with RCU implementation: Mean: 3.451 (-11.66 %) Median: 3.447 (-12.22%) Std Dev: 0.049 With Lockdep using irq tracepoints with SRCU implementation (this series): Mean: 3.020 (I would consider the improvement against the "without this series" case as just noise). Median: 3.013 Std Dev: 0.033 [1] https://patchwork.kernel.org/patch/10344297/ [remove rcu_read_lock_sched_notrace as its the equivalent of preempt_disable_notrace and is unnecessary to call in tracepoint code] Link: http://lkml.kernel.org/r/20180730222423.196630-3-joel@joelfernandes.org Cleaned-up-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> [ Simplified WARN_ON_ONCE() ] Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-05-28tracepoints: Fix the descriptions of tracepoint_probe_register{_prio}Lee, Chun-Yi1-2/+1
The description of tracepoint_probe_register duplicates with tracepoint_probe_register_prio. This patch cleans up the descriptions. Link: http://lkml.kernel.org/r/20170616082643.7311-1-jlee@suse.com Signed-off-by: "Lee, Chun-Yi" <jlee@suse.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-04-30tracepoint: Do not warn on ENOMEMMathieu Desnoyers1-2/+2
Tracepoint should only warn when a kernel API user does not respect the required preconditions (e.g. same tracepoint enabled twice, or called to remove a tracepoint that does not exist). Silence warning in out-of-memory conditions, given that the error is returned to the caller. This ensures that out-of-memory error-injection testing does not trigger warnings in tracepoint.c, which were seen by syzbot. Link: https://lkml.kernel.org/r/001a114465e241a8720567419a72@google.com Link: https://lkml.kernel.org/r/001a1140e0de15fc910567464190@google.com Link: http://lkml.kernel.org/r/20180315124424.32319-1-mathieu.desnoyers@efficios.com CC: Peter Zijlstra <peterz@infradead.org> CC: Jiri Olsa <jolsa@redhat.com> CC: Arnaldo Carvalho de Melo <acme@kernel.org> CC: Alexander Shishkin <alexander.shishkin@linux.intel.com> CC: Namhyung Kim <namhyung@kernel.org> CC: stable@vger.kernel.org Fixes: de7b2973903c6 ("tracepoint: Use struct pointer instead of name hash for reg/unreg tracepoints") Reported-by: syzbot+9c0d616860575a73166a@syzkaller.appspotmail.com Reported-by: syzbot+4e9ae7fa46233396f64d@syzkaller.appspotmail.com Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-12-04tracepoint: Remove smp_read_barrier_depends() from commentPaul E. McKenney1-5/+4
The comment in tracepoint_add_func() mentions smp_read_barrier_depends(), whose use should be quite restricted. This commit updates the comment to instead mention the smp_store_release() and rcu_dereference_sched() that the current code actually uses. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar1-0/+1
<linux/sched/task.h> We are going to split <linux/sched/task.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/task.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar1-1/+1
<linux/sched/signal.h> We are going to split <linux/sched/signal.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/signal.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-12-09tracing: Have the reg function allow to failSteven Rostedt (Red Hat)1-3/+9
Some tracepoints have a registration function that gets enabled when the tracepoint is enabled. There may be cases that the registraction function must fail (for example, can't allocate enough memory). In this case, the tracepoint should also fail to register, otherwise the user would not know why the tracepoint is not working. Cc: David Howells <dhowells@redhat.com> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Cc: Anton Blanchard <anton@samba.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-23kernel/...: convert pr_warning to pr_warnJoe Perches1-1/+1
Use the more common logging method with the eventual goal of removing pr_warning altogether. Miscellanea: - Realign arguments - Coalesce formats - Add missing space between a few coalesced formats Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> [kernel/power/suspend.c] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-10-26tracepoint: Give priority to probes of tracepointsSteven Rostedt (Red Hat)1-11/+50
In order to guarantee that a probe will be called before other probes that are attached to a tracepoint, there needs to be a mechanism to provide priority of one probe over the others. Adding a prio field to the struct tracepoint_func, which lets the probes be sorted by the priority set in the structure. If no priority is specified, then a priority of 10 is given (this is a macro, and perhaps may be changed in the future). Now probes may be added to affect other probes that are attached to a tracepoint with a guaranteed order. One use case would be to allow tracing of tracepoints be able to filter by pid. A special (higher priority probe) may be added to the sched_switch tracepoint and set the necessary flags of the other tracepoints to notify them if they should be traced or not. In case a tracepoint is enabled at the sched_switch tracepoint too, the order of the two are not random. Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-06-21tracing: syscall_regfunc() should not skip kernel threadsOleg Nesterov1-3/+1
syscall_regfunc() ignores the kernel threads because "it has no effect", see cc3b13c1 "Don't trace kernel thread syscalls" which added this check. However, this means that a user-space task spawned by call_usermodehelper() will run without TIF_SYSCALL_TRACEPOINT if sys_tracepoint_refcount != 0. Remove this check. The unnecessary report from ret_from_fork path mentioned by cc3b13c1 is no longer possible, see See commit fb45550d76bb5 "make sure that kernel_thread() callbacks call do_exit() themselves". A kernel_thread() callback can only return and take the int_ret_from_sys_call path after do_execve() succeeds, otherwise the kernel will crash. But in this case it is no longer a kernel thread and thus is needs TIF_SYSCALL_TRACEPOINT. Link: http://lkml.kernel.org/p/20140413185938.GD20668@redhat.com Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-06-21tracing: Change syscall_*regfunc() to check PF_KTHREAD and use ↵Oleg Nesterov1-13/+11
for_each_process_thread() 1. Remove _irqsafe from syscall_regfunc/syscall_unregfunc, read_lock(tasklist) doesn't need to disable irqs. 2. Change this code to avoid the deprecated do_each_thread() and use for_each_process_thread() (stolen from the patch from Frederic). 3. Change syscall_regfunc() to check PF_KTHREAD to skip the kernel threads, ->mm != NULL is the common mistake. Note: probably this check should be simply removed, needs another patch. [fweisbec@gmail.com: s/do_each_thread/for_each_process_thread/] Link: http://lkml.kernel.org/p/20140413185918.GC20668@redhat.com Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-06-05kernel/tracepoint.c: kernel-doc fixesFabian Frederick1-0/+2
Signed-off-by: Fabian Frederick <fabf@skynet.be> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-05-08tracepoint: Fix use of tracepoint funcs after rcu freeMathieu Desnoyers1-2/+2
Commit de7b2973903c "tracepoint: Use struct pointer instead of name hash for reg/unreg tracepoints" introduces a use after free by calling release_probes on the old struct tracepoint array before the newly allocated array is published with rcu_assign_pointer. There is a race window where tracepoints (RCU readers) can perform a "use-after-grace-period-after-free", which shows up as a GPF in stress-tests. Link: http://lkml.kernel.org/r/53698021.5020108@oracle.com Link: http://lkml.kernel.org/p/1399549669-25465-1-git-send-email-mathieu.desnoyers@efficios.com Reported-by: Sasha Levin <sasha.levin@oracle.com> CC: Oleg Nesterov <oleg@redhat.com> CC: Dave Jones <davej@redhat.com> Fixes: de7b2973903c "tracepoint: Use struct pointer instead of name hash for reg/unreg tracepoints" Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-04-13Merge tag 'trace-3.15-v2' of ↵Linus Torvalds1-293/+223
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull more tracing updates from Steven Rostedt: "This includes the final patch to clean up and fix the issue with the design of tracepoints and how a user could register a tracepoint and have that tracepoint not be activated but no error was shown. The design was for an out of tree module but broke in tree users. The clean up was to remove the saving of the hash table of tracepoint names such that they can be enabled before they exist (enabling a module tracepoint before that module is loaded). This added more complexity than needed. The clean up was to remove that code and just enable tracepoints that exist or fail if they do not. This removed a lot of code as well as the complexity that it brought. As a side effect, instead of registering a tracepoint by its name, the tracepoint needs to be registered with the tracepoint descriptor. This removes having to duplicate the tracepoint names that are enabled. The second patch was added that simplified the way modules were searched for. This cleanup required changes that were in the 3.15 queue as well as some changes that were added late in the 3.14-rc cycle. This final change waited till the two were merged in upstream and then the change was added and full tests were run. Unfortunately, the test found some errors, but after it was already submitted to the for-next branch and not to be rebased. Sparse errors were detected by Fengguang Wu's bot tests, and my internal tests discovered that the anonymous union initialization triggered a bug in older gcc compilers. Luckily, there was a bugzilla for the gcc bug which gave a work around to the problem. The third and fourth patch handled the sparse error and the gcc bug respectively. A final patch was tagged along to fix a missing documentation for the README file" * tag 'trace-3.15-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Add missing function triggers dump and cpudump to README tracing: Fix anonymous unions in struct ftrace_event_call tracepoint: Fix sparse warnings in tracepoint.c tracepoint: Simplify tracepoint module search tracepoint: Use struct pointer instead of name hash for reg/unreg tracepoints
2014-04-09tracepoint: Fix sparse warnings in tracepoint.cMathieu Desnoyers1-2/+4
Fix the following sparse warnings: CHECK kernel/tracepoint.c kernel/tracepoint.c:184:18: warning: incorrect type in assignment (different address spaces) kernel/tracepoint.c:184:18: expected struct tracepoint_func *tp_funcs kernel/tracepoint.c:184:18: got struct tracepoint_func [noderef] <asn:4>*funcs kernel/tracepoint.c:216:18: warning: incorrect type in assignment (different address spaces) kernel/tracepoint.c:216:18: expected struct tracepoint_func *tp_funcs kernel/tracepoint.c:216:18: got struct tracepoint_func [noderef] <asn:4>*funcs kernel/tracepoint.c:392:24: error: return expression in void function CC kernel/tracepoint.o kernel/tracepoint.c: In function tracepoint_module_going: kernel/tracepoint.c:491:6: warning: symbol 'syscall_regfunc' was not declared. Should it be static? kernel/tracepoint.c:508:6: warning: symbol 'syscall_unregfunc' was not declared. Should it be static? Link: http://lkml.kernel.org/r/1397049883-28692-1-git-send-email-mathieu.desnoyers@efficios.com Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-04-09tracepoint: Simplify tracepoint module searchSteven Rostedt (Red Hat)1-5/+4
Instead of copying the num_tracepoints and tracepoints_ptrs from the module structure to the tp_mod structure, which only uses it to find the module associated to tracepoints of modules that are coming and going, simply copy the pointer to the module struct to the tracepoint tp_module structure. Also removed un-needed brackets around an if statement. Link: http://lkml.kernel.org/r/20140408201705.4dad2c4a@gandalf.local.home Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-04-09tracepoint: Use struct pointer instead of name hash for reg/unreg tracepointsMathieu Desnoyers1-291/+220
Register/unregister tracepoint probes with struct tracepoint pointer rather than tracepoint name. This change, which vastly simplifies tracepoint.c, has been proposed by Steven Rostedt. It also removes 8.8kB (mostly of text) to the vmlinux size. From this point on, the tracers need to pass a struct tracepoint pointer to probe register/unregister. A probe can now only be connected to a tracepoint that exists. Moreover, tracers are responsible for unregistering the probe before the module containing its associated tracepoint is unloaded. text data bss dec hex filename 10443444 4282528 10391552 25117524 17f4354 vmlinux.orig 10434930 4282848 10391552 25109330 17f2352 vmlinux Link: http://lkml.kernel.org/r/1396992381-23785-2-git-send-email-mathieu.desnoyers@efficios.com CC: Ingo Molnar <mingo@kernel.org> CC: Frederic Weisbecker <fweisbec@gmail.com> CC: Andrew Morton <akpm@linux-foundation.org> CC: Frank Ch. Eigler <fche@redhat.com> CC: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> [ SDR - fixed return val in void func in tracepoint_module_going() ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-04-06Merge tag 'modules-next-for-linus' of ↵Linus Torvalds1-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull module updates from Rusty Russell: "Nothing major: the stricter permissions checking for sysfs broke a staging driver; fix included. Greg KH said he'd take the patch but hadn't as the merge window opened, so it's included here to avoid breaking build" * tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: staging: fix up speakup kobject mode Use 'E' instead of 'X' for unsigned module taint flag. VERIFY_OCTAL_PERMISSIONS: stricter checking for sysfs perms. kallsyms: fix percpu vars on x86-64 with relocation. kallsyms: generalize address range checking module: LLVMLinux: Remove unused function warning from __param_check macro Fix: module signature vs tracepoints: add new TAINT_UNSIGNED_MODULE module: remove MODULE_GENERIC_TABLE module: allow multiple calls to MODULE_DEVICE_TABLE() per module module: use pr_cont
2014-04-03Merge tag 'trace-3.15' of ↵Linus Torvalds1-217/+34
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: "Most of the changes were largely clean ups, and some documentation. But there were a few features that were added: Uprobes now work with event triggers and multi buffers and have support under ftrace and perf. The big feature is that the function tracer can now be used within the multi buffer instances. That is, you can now trace some functions in one buffer, others in another buffer, all functions in a third buffer and so on. They are basically agnostic from each other. This only works for the function tracer and not for the function graph trace, although you can have the function graph tracer running in the top level buffer (or any tracer for that matter) and have different function tracing going on in the sub buffers" * tag 'trace-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (45 commits) tracing: Add BUG_ON when stack end location is over written tracepoint: Remove unused API functions Revert "tracing: Move event storage for array from macro to standalone function" ftrace: Constify ftrace_text_reserved tracepoints: API doc update to tracepoint_probe_register() return value tracepoints: API doc update to data argument ftrace: Fix compilation warning about control_ops_free ftrace/x86: BUG when ftrace recovery fails ftrace: Warn on error when modifying ftrace function ftrace: Remove freelist from struct dyn_ftrace ftrace: Do not pass data to ftrace_dyn_arch_init ftrace: Pass retval through return in ftrace_dyn_arch_init() ftrace: Inline the code from ftrace_dyn_table_alloc() ftrace: Cleanup of global variables ftrace_new_pgs and ftrace_update_cnt tracing: Evaluate len expression only once in __dynamic_array macro tracing: Correctly expand len expressions from __dynamic_array macro tracing/module: Replace include of tracepoint.h with jump_label.h in module.h tracing: Fix event header migrate.h to include tracepoint.h tracing: Fix event header writeback.h to include tracepoint.h tracing: Warn if a tracepoint is not set via debugfs ...
2014-03-21tracepoint: Remove unused API functionsMathieu Desnoyers1-217/+5
After the following commit: commit b75ef8b44b1cb95f5a26484b0e2fe37a63b12b44 Author: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Date: Wed Aug 10 15:18:39 2011 -0400 Tracepoint: Dissociate from module mutex The following functions became unnecessary: - tracepoint_probe_register_noupdate, - tracepoint_probe_unregister_noupdate, - tracepoint_probe_update_all. In fact, none of the in-kernel tracers, nor LTTng, nor SystemTAP use them. Remove those. Moreover, the functions: - tracepoint_iter_start, - tracepoint_iter_next, - tracepoint_iter_stop, - tracepoint_iter_reset. are unused by in-kernel tracers, LTTng and SystemTAP. Remove those too. Link: http://lkml.kernel.org/r/1395379142-2118-2-git-send-email-mathieu.desnoyers@efficios.com Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-03-13Fix: module signature vs tracepoints: add new TAINT_UNSIGNED_MODULEMathieu Desnoyers1-2/+3
Users have reported being unable to trace non-signed modules loaded within a kernel supporting module signature. This is caused by tracepoint.c:tracepoint_module_coming() refusing to take into account tracepoints sitting within force-loaded modules (TAINT_FORCED_MODULE). The reason for this check, in the first place, is that a force-loaded module may have a struct module incompatible with the layout expected by the kernel, and can thus cause a kernel crash upon forced load of that module on a kernel with CONFIG_TRACEPOINTS=y. Tracepoints, however, specifically accept TAINT_OOT_MODULE and TAINT_CRAP, since those modules do not lead to the "very likely system crash" issue cited above for force-loaded modules. With kernels having CONFIG_MODULE_SIG=y (signed modules), a non-signed module is tainted re-using the TAINT_FORCED_MODULE taint flag. Unfortunately, this means that Tracepoints treat that module as a force-loaded module, and thus silently refuse to consider any tracepoint within this module. Since an unsigned module does not fit within the "very likely system crash" category of tainting, add a new TAINT_UNSIGNED_MODULE taint flag to specifically address this taint behavior, and accept those modules within Tracepoints. We use the letter 'X' as a taint flag character for a module being loaded that doesn't know how to sign its name (proposed by Steven Rostedt). Also add the missing 'O' entry to trace event show_module_flags() list for the sake of completeness. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> NAKed-by: Ingo Molnar <mingo@redhat.com> CC: Thomas Gleixner <tglx@linutronix.de> CC: David Howells <dhowells@redhat.com> CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2014-03-12tracepoints: API doc update to tracepoint_probe_register() return valueMathieu Desnoyers1-1/+11
Describe the return values of tracepoint_probe_register(), including -ENODEV added by commit: Author: Steven Rostedt <rostedt@goodmis.org> tracing: Warn if a tracepoint is not set via debugfs Link: http://lkml.kernel.org/r/1394499898-1537-2-git-send-email-mathieu.desnoyers@efficios.com CC: Ingo Molnar <mingo@kernel.org> CC: Frederic Weisbecker <fweisbec@gmail.com> CC: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-03-12tracepoints: API doc update to data argumentMathieu Desnoyers1-0/+4
Describe the @data argument (probe private data). Link: http://lkml.kernel.org/r/1394587948-27878-1-git-send-email-mathieu.desnoyers@efficios.com Fixes: 38516ab59fbc "tracing: Let tracepoints have data passed to tracepoint callbacks" CC: Ingo Molnar <mingo@kernel.org> CC: Frederic Weisbecker <fweisbec@gmail.com> CC: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-03-07tracing: Warn if a tracepoint is not set via debugfsSteven Rostedt1-1/+10
Tracepoints were made to allow enabling a tracepoint in a module before that module was loaded. When a tracepoint is enabled and it does not exist, the name is stored and will be enabled when the tracepoint is created. The problem with this approach is that when a tracepoint is enabled when it expects to be there, it gives no warning that it does not exist. To add salt to the wound, if a module is added and sets the FORCED flag, which can happen if it isn't signed properly, the tracepoint code will not enabled the tracepoints, but they will be created in the debugfs system! When a user goes to enable the tracepoint, the tracepoint code will not see it existing and will think it is to be enabled later AND WILL NOT GIVE A WARNING. The tracing will look like it succeeded but will actually be doing nothing. This will cause lots of confusion and headaches for developers trying to figure out why they are not seeing their tracepoints. Link: http://lkml.kernel.org/r/20140213154507.4040fb06@gandalf.local.home Reported-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Reported-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-03-04tracepoint: Do not waste memory on mods with no tracepointsSteven Rostedt (Red Hat)1-0/+6
No reason to allocate tp_module structures for modules that have no tracepoints. This just wastes memory. Fixes: b75ef8b44b1c "Tracepoint: Dissociate from module mutex" Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-03-04tracing: Do not add event files for modules that fail tracepointsSteven Rostedt (Red Hat)1-1/+6
If a module fails to add its tracepoints due to module tainting, do not create the module event infrastructure in the debugfs directory. As the events will not work and worse yet, they will silently fail, making the user wonder why the events they enable do not display anything. Having a warning on module load and the events not visible to the users will make the cause of the problem much clearer. Link: http://lkml.kernel.org/r/20140227154923.265882695@goodmis.org Fixes: 6d723736e472 "tracing/events: add support for modules to TRACE_EVENT" Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: stable@vger.kernel.org # 2.6.31+ Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-04-30Merge tag 'trace-3.10' of ↵Linus Torvalds1-8/+13
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: "Along with the usual minor fixes and clean ups there are a few major changes with this pull request. 1) Multiple buffers for the ftrace facility This feature has been requested by many people over the last few years. I even heard that Google was about to implement it themselves. I finally had time and cleaned up the code such that you can now create multiple instances of the ftrace buffer and have different events go to different buffers. This way, a low frequency event will not be lost in the noise of a high frequency event. Note, currently only events can go to different buffers, the tracers (ie function, function_graph and the latency tracers) still can only be written to the main buffer. 2) The function tracer triggers have now been extended. The function tracer had two triggers. One to enable tracing when a function is hit, and one to disable tracing. Now you can record a stack trace on a single (or many) function(s), take a snapshot of the buffer (copy it to the snapshot buffer), and you can enable or disable an event to be traced when a function is hit. 3) A perf clock has been added. A "perf" clock can be chosen to be used when tracing. This will cause ftrace to use the same clock as perf uses, and hopefully this will make it easier to interleave the perf and ftrace data for analysis." * tag 'trace-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (82 commits) tracepoints: Prevent null probe from being added tracing: Compare to 1 instead of zero for is_signed_type() tracing: Remove obsolete macro guard _TRACE_PROFILE_INIT ftrace: Get rid of ftrace_profile_bits tracing: Check return value of tracing_init_dentry() tracing: Get rid of unneeded key calculation in ftrace_hash_move() tracing: Reset ftrace_graph_filter_enabled if count is zero tracing: Fix off-by-one on allocating stat->pages kernel: tracing: Use strlcpy instead of strncpy tracing: Update debugfs README file tracing: Fix ftrace_dump() tracing: Rename trace_event_mutex to trace_event_sem tracing: Fix comment about prefix in arch_syscall_match_sym_name() tracing: Convert trace_destroy_fields() to static tracing: Move find_event_field() into trace_events.c tracing: Use TRACE_MAX_PRINT instead of constant tracing: Use pr_warn_once instead of open coded implementation ring-buffer: Add ring buffer startup selftest tracing: Bring Documentation/trace/ftrace.txt up to date tracing: Add "perf" trace_clock ... Conflicts: kernel/trace/ftrace.c kernel/trace/trace.c
2013-04-20tracepoints: Prevent null probe from being addedSahara1-8/+13
Somehow tracepoint_entry_add_probe() function allows a null probe function. And, this may lead to unexpected results since the number of probe functions in an entry can be counted by checking whether a probe is null or not in the for-loop. This patch prevents a null probe from being added. In tracepoint_entry_remove_probe() function, checking probe parameter within the for-loop is moved out for code efficiency, leaving the null probe feature which removes all probe functions in the entry. Link: http://lkml.kernel.org/r/1365991995-19445-1-git-send-email-kpark3469@gmail.com Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Sahara <keun-o.park@windriver.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>