Age | Commit message (Collapse) | Author | Files | Lines |
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull memory model updates from Ingo Molnar:
"LKMM updates:
- Update documentation and code example
KCSAN updates:
- Introduce CONFIG_KCSAN_STRICT (which RCU uses)
- Optimize use of get_ctx() by kcsan_found_watchpoint()
- Rework atomic.h into permissive.h
- Add the ability to ignore writes that change only one bit of a
given data-racy variable.
- Improve comments"
* tag 'locking-debug-2021-09-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tools/memory-model: Document data_race(READ_ONCE())
tools/memory-model: Heuristics using data_race() must handle all values
tools/memory-model: Add example for heuristic lockless reads
tools/memory-model: Make read_foo_diagnostic() more clearly diagnostic
kcsan: Make strict mode imply interruptible watchers
kcsan: permissive: Ignore data-racy 1-bit value changes
kcsan: Print if strict or non-strict during init
kcsan: Rework atomic.h into permissive.h
kcsan: Reduce get_ctx() uses in kcsan_found_watchpoint()
kcsan: Introduce CONFIG_KCSAN_STRICT
kcsan: Remove CONFIG_KCSAN_DEBUG
kcsan: Improve some Kconfig comments
|
|
Pull dma-mapping updates from Christoph Hellwig:
- fix debugfs initialization order (Anthony Iliopoulos)
- use memory_intersects() directly (Kefeng Wang)
- allow to return specific errors from ->map_sg (Logan Gunthorpe,
Martin Oliveira)
- turn the dma_map_sg return value into an unsigned int (me)
- provide a common global coherent pool іmplementation (me)
* tag 'dma-mapping-5.15' of git://git.infradead.org/users/hch/dma-mapping: (31 commits)
hexagon: use the generic global coherent pool
dma-mapping: make the global coherent pool conditional
dma-mapping: add a dma_init_global_coherent helper
dma-mapping: simplify dma_init_coherent_memory
dma-mapping: allow using the global coherent pool for !ARM
ARM/nommu: use the generic dma-direct code for non-coherent devices
dma-direct: add support for dma_coherent_default_memory
dma-mapping: return an unsigned int from dma_map_sg{,_attrs}
dma-mapping: disallow .map_sg operations from returning zero on error
dma-mapping: return error code from dma_dummy_map_sg()
x86/amd_gart: don't set failed sg dma_address to DMA_MAPPING_ERROR
x86/amd_gart: return error code from gart_map_sg()
xen: swiotlb: return error code from xen_swiotlb_map_sg()
parisc: return error code from .map_sg() ops
sparc/iommu: don't set failed sg dma_address to DMA_MAPPING_ERROR
sparc/iommu: return error codes from .map_sg() ops
s390/pci: don't set failed sg dma_address to DMA_MAPPING_ERROR
s390/pci: return error code from s390_dma_map_sg()
powerpc/iommu: don't set failed sg dma_address to DMA_MAPPING_ERROR
powerpc/iommu: return error code from .map_sg() ops
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Optionally, provide an index of possible printk messages via
<debugfs>/printk/index/. It can be used when monitoring important
kernel messages on a farm of various hosts. The monitor has to be
updated when some messages has changed or are not longer available by
a newly deployed kernel.
- Add printk.console_no_auto_verbose boot parameter. It allows to
generate crash dump even with slow consoles in a reasonable time
frame.
- Remove printk_safe buffers. The messages are always stored directly
to the main logbuffer, even in NMI or recursive context. Also it
allows to serialize syslog operations by a mutex instead of a spin
lock.
- Misc clean up and build fixes.
* tag 'printk-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk/index: Fix -Wunused-function warning
lib/nmi_backtrace: Serialize even messages about idle CPUs
printk: Add printk.console_no_auto_verbose boot parameter
printk: Remove console_silent()
lib/test_scanf: Handle n_bits == 0 in random tests
printk: syslog: close window between wait and read
printk: convert @syslog_lock to mutex
printk: remove NMI tracking
printk: remove safe buffers
printk: track/limit recursion
lib/nmi_backtrace: explicitly serialize banner and regs
printk: Move the printk() kerneldoc comment to its new home
printk/index: Fix warning about missing prototypes
MIPS/asm/printk: Fix build failure caused by printk
printk: index: Add indexing support to dev_printk
printk: Userspace format indexing support
printk: Rework parse_prefix into printk_parse_prefix
printk: Straighten out log_flags into printk_info_flags
string_helpers: Escape double quotes in escape_special
printk/console: Check consistent sequence number when handling race in console_unlock()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull exit cleanups from Eric Biederman:
"In preparation of doing something about PTRACE_EVENT_EXIT I have
started cleaning up various pieces of code related to do_exit. Most of
that code I did not manage to get tested and reviewed before the merge
window opened but a handful of very useful cleanups are ready to be
merged.
The first change is simply the removal of the bdflush system call. The
code has now been disabled long enough that even the oldest userspace
working userspace setups anyone can find to test are fine with the
bdflush system call being removed.
Changing m68k fsp040_die to use force_sigsegv(SIGSEGV) instead of
calling do_exit directly is interesting only in that it is nearly the
most difficult of the incorrect uses of do_exit to remove.
The change to the seccomp code to simply send a signal instead of
calling do_coredump directly is a very nice little cleanup made
possible by realizing the existing signal sending helpers were missing
a little bit of functionality that is easy to provide"
* 'exit-cleanups-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
signal/seccomp: Dump core when there is only one live thread
signal/seccomp: Refactor seccomp signal and coredump generation
signal/m68k: Use force_sigsegv(SIGSEGV) in fpsp040_die
exit/bdflush: Remove the deprecated bdflush system call
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull siginfo si_trapno updates from Eric Biederman:
"The full set of si_trapno changes was not appropriate as a fix for the
newly added SIGTRAP TRAP_PERF, and so I postponed the rest of the
related cleanups.
This is the rest of the cleanups for si_trapno that reduces it from
being a really weird arch special case that is expect to be always
present (but isn't) on the architectures that support it to being yet
another field in the _sigfault union of struct siginfo.
The changes have been reviewed and marinated in linux-next. With the
removal of this awkward special case new code (like SIGTRAP TRAP_PERF)
that works across architectures should be easier to write and
maintain"
* 'siginfo-si_trapno-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
signal: Rename SIL_PERF_EVENT SIL_FAULT_PERF_EVENT for consistency
signal: Verify the alignment and size of siginfo_t
signal: Remove the generic __ARCH_SI_TRAPNO support
signal/alpha: si_trapno is only used with SIGFPE and SIGTRAP TRAP_UNK
signal/sparc: si_trapno is only used with SIGILL ILL_ILLTRP
arm64: Add compile-time asserts for siginfo_t offsets
arm: Add compile-time asserts for siginfo_t offsets
sparc64: Add compile-time asserts for siginfo_t offsets
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Enable memcg accounting for various networking objects.
BPF:
- Introduce bpf timers.
- Add perf link and opaque bpf_cookie which the program can read out
again, to be used in libbpf-based USDT library.
- Add bpf_task_pt_regs() helper to access user space pt_regs in
kprobes, to help user space stack unwinding.
- Add support for UNIX sockets for BPF sockmap.
- Extend BPF iterator support for UNIX domain sockets.
- Allow BPF TCP congestion control progs and bpf iterators to call
bpf_setsockopt(), e.g. to switch to another congestion control
algorithm.
Protocols:
- Support IOAM Pre-allocated Trace with IPv6.
- Support Management Component Transport Protocol.
- bridge: multicast: add vlan support.
- netfilter: add hooks for the SRv6 lightweight tunnel driver.
- tcp:
- enable mid-stream window clamping (by user space or BPF)
- allow data-less, empty-cookie SYN with TFO_SERVER_COOKIE_NOT_REQD
- more accurate DSACK processing for RACK-TLP
- mptcp:
- add full mesh path manager option
- add partial support for MP_FAIL
- improve use of backup subflows
- optimize option processing
- af_unix: add OOB notification support.
- ipv6: add IFLA_INET6_RA_MTU to expose MTU value advertised by the
router.
- mac80211: Target Wake Time support in AP mode.
- can: j1939: extend UAPI to notify about RX status.
Driver APIs:
- Add page frag support in page pool API.
- Many improvements to the DSA (distributed switch) APIs.
- ethtool: extend IRQ coalesce uAPI with timer reset modes.
- devlink: control which auxiliary devices are created.
- Support CAN PHYs via the generic PHY subsystem.
- Proper cross-chip support for tag_8021q.
- Allow TX forwarding for the software bridge data path to be
offloaded to capable devices.
Drivers:
- veth: more flexible channels number configuration.
- openvswitch: introduce per-cpu upcall dispatch.
- Add internet mix (IMIX) mode to pktgen.
- Transparently handle XDP operations in the bonding driver.
- Add LiteETH network driver.
- Renesas (ravb):
- support Gigabit Ethernet IP
- NXP Ethernet switch (sja1105):
- fast aging support
- support for "H" switch topologies
- traffic termination for ports under VLAN-aware bridge
- Intel 1G Ethernet
- support getcrosststamp() with PCIe PTM (Precision Time
Measurement) for better time sync
- support Credit-Based Shaper (CBS) offload, enabling HW traffic
prioritization and bandwidth reservation
- Broadcom Ethernet (bnxt)
- support pulse-per-second output
- support larger Rx rings
- Mellanox Ethernet (mlx5)
- support ethtool RSS contexts and MQPRIO channel mode
- support LAG offload with bridging
- support devlink rate limit API
- support packet sampling on tunnels
- Huawei Ethernet (hns3):
- basic devlink support
- add extended IRQ coalescing support
- report extended link state
- Netronome Ethernet (nfp):
- add conntrack offload support
- Broadcom WiFi (brcmfmac):
- add WPA3 Personal with FT to supported cipher suites
- support 43752 SDIO device
- Intel WiFi (iwlwifi):
- support scanning hidden 6GHz networks
- support for a new hardware family (Bz)
- Xen pv driver:
- harden netfront against malicious backends
- Qualcomm mobile
- ipa: refactor power management and enable automatic suspend
- mhi: move MBIM to WWAN subsystem interfaces
Refactor:
- Ambient BPF run context and cgroup storage cleanup.
- Compat rework for ndo_ioctl.
Old code removal:
- prism54 remove the obsoleted driver, deprecated by the p54 driver.
- wan: remove sbni/granch driver"
* tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1715 commits)
net: Add depends on OF_NET for LiteX's LiteETH
ipv6: seg6: remove duplicated include
net: hns3: remove unnecessary spaces
net: hns3: add some required spaces
net: hns3: clean up a type mismatch warning
net: hns3: refine function hns3_set_default_feature()
ipv6: remove duplicated 'net/lwtunnel.h' include
net: w5100: check return value after calling platform_get_resource()
net/mlxbf_gige: Make use of devm_platform_ioremap_resourcexxx()
net: mdio: mscc-miim: Make use of the helper function devm_platform_ioremap_resource()
net: mdio-ipq4019: Make use of devm_platform_ioremap_resource()
fou: remove sparse errors
ipv4: fix endianness issue in inet_rtm_getroute_build_skb()
octeontx2-af: Set proper errorcode for IPv4 checksum errors
octeontx2-af: Fix static code analyzer reported issues
octeontx2-af: Fix mailbox errors in nix_rss_flowkey_cfg
octeontx2-af: Fix loop in free and unmap counter
af_unix: fix potential NULL deref in unix_dgram_connect()
dpaa2-eth: Replace strlcpy with strscpy
octeontx2-af: Use NDC TX for transmit packet data
...
|
|
Pull workqueue updates from Tejun Heo:
"There is a long-standing subtle destroy_workqueue() bug where a
workqueue can be destroyed while internal work items used for flushing
are still in flight. Lai fixed it by assigning a flush color to the
internal work items so that they are correctly waited for during
destruction.
Other than that, all are minor cleanups"
* 'for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Remove unused WORK_NO_COLOR
workqueue: Assign a color to barrier work items
workqueue: Mark barrier work with WORK_STRUCT_INACTIVE
workqueue: Change the code of calculating work_flags in insert_wq_barrier()
workqueue: Change arguement of pwq_dec_nr_in_flight()
workqueue: Rename "delayed" (delayed by active management) to "inactive"
workqueue: Replace deprecated CPU-hotplug functions.
workqueue: Replace deprecated ida_simple_*() with ida_alloc()/ida_free()
workqueue: Fix typo in comments
workqueue: Fix possible memory leaks in wq_numa_init()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
"Two cpuset behavior changes:
- cpuset on cgroup2 is changed to enable memory migration based on
nodemask by default.
- A notification is generated when cpuset partition state changes.
All other patches are minor fixes and cleanups"
* 'for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Avoid compiler warnings with no subsystems
cgroup/cpuset: Avoid memory migration when nodemasks match
cgroup/cpuset: Enable memory migration for cpuset v2
cgroup/cpuset: Enable event notification when partition state changes
cgroup: cgroup-v1: clean up kernel-doc notation
cgroup: Replace deprecated CPU-hotplug functions.
cgroup/cpuset: Fix violation of cpuset locking rule
cgroup/cpuset: Fix a partition bug with hotplug
cgroup/cpuset: Miscellaneous code cleanup
cgroup: remove cgroup_mount from comments
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These address some PCI device power management issues, add new
hardware support to the RAPL power capping driver, add HWP guaranteed
performance change notification support to the intel_pstate driver,
replace deprecated CPU-hotplug functions in a few places, update CPU
PM notifiers to use raw spinlocks, update the PM domains framework
(new DT property support, Kconfig fix), do a couple of cleanups in
code related to system sleep, and improve the energy model and the
schedutil cpufreq governor.
Specifics:
- Address 3 PCI device power management issues (Rafael Wysocki).
- Add Power Limit4 support for Alder Lake to the Intel RAPL power
capping driver (Sumeet Pawnikar).
- Add HWP guaranteed performance change notification support to the
intel_pstate driver (Srinivas Pandruvada).
- Replace deprecated CPU-hotplug functions in code related to power
management (Sebastian Andrzej Siewior).
- Update CPU PM notifiers to use raw spinlocks (Valentin Schneider).
- Add support for 'required-opps' DT property to the generic power
domains (genpd) framework and use this property for I2C on ARM64
sc7180 (Rajendra Nayak).
- Fix Kconfig issue related to genpd (Geert Uytterhoeven).
- Increase energy calculation precision in the Energy Model (Lukasz
Luba).
- Fix kobject deletion in the exit code of the schedutil cpufreq
governor (Kevin Hao).
- Unmark some functions as kernel-doc in the PM core to avoid
false-positive documentation build warnings (Randy Dunlap).
- Check RTC features instead of ops in suspend_test Alexandre
Belloni)"
* tag 'pm-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: domains: Fix domain attach for CONFIG_PM_OPP=n
powercap: Add Power Limit4 support for Alder Lake SoC
cpufreq: intel_pstate: Process HWP Guaranteed change notification
thermal: intel: Allow processing of HWP interrupt
notifier: Remove atomic_notifier_call_chain_robust()
PM: cpu: Make notifier chain use a raw_spinlock_t
PM: sleep: unmark 'state' functions as kernel-doc
arm64: dts: sc7180: Add required-opps for i2c
PM: domains: Add support for 'required-opps' to set default perf state
opp: Don't print an error if required-opps is missing
cpufreq: schedutil: Use kobject release() method to free sugov_tunables
PM: EM: Increase energy calculation precision
PM: sleep: check RTC features instead of ops in suspend_test
PM: sleep: s2idle: Replace deprecated CPU-hotplug functions
cpufreq: Replace deprecated CPU-hotplug functions
powercap: intel_rapl: Replace deprecated CPU-hotplug functions
PCI: PM: Enable PME if it can be signaled from D3cold
PCI: PM: Avoid forcing PCI_D0 for wakeup reasons inconsistently
PCI: Use pci_update_current_state() in pci_enable_device_flags()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit updates from Paul Moore:
"Two patches in the audit pull request for v5.15; one is trivial
("header protection") but the second is a real patch that fixes a
refcounting problem.
The refcount fix normally would have been sent up during the -rcX
cycle, but since we merged it less than a week before v5.14 proper I
felt it was better to wait for the merge window to open; the patch is
marked with the usual -stable markings"
* tag 'audit-pr-20210830' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: move put_tree() to avoid trim_trees refcount underflow and UAF
audit: add header protection to kernel/audit.h
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull set_user() update from Christian Brauner:
"This contains a single fix to set_user() which aligns permission
checks with the corresponding fork() codepath. No one involved in this
could come up with a reason for the difference.
A capable caller can already circumvent the check when they fork where
the permission checks are already for the relevant capabilities in
addition to also allowing to exceed nproc when it is the init user.
So apply the same logic to set_user()"
* tag 'kernel.sys.v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
set_user: add capability check when rlimit(RLIMIT_NPROC) exceeds
|
|
Pull nfsd updates from Chuck Lever:
"New features:
- Support for server-side disconnect injection via debugfs
- Protocol definitions for new RPC_AUTH_TLS authentication flavor
Performance improvements:
- Reduce page allocator traffic in the NFSD splice read actor
- Reduce CPU utilization in svcrdma's Send completion handler
Notable bug fixes:
- Stabilize lockd operation when re-exporting NFS mounts
- Fix the use of %.*s in NFSD tracepoints
- Fix /proc/sys/fs/nfs/nsm_use_hostnames"
* tag 'nfsd-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (31 commits)
nfsd: fix crash on LOCKT on reexported NFSv3
nfs: don't allow reexport reclaims
lockd: don't attempt blocking locks on nfs reexports
nfs: don't atempt blocking locks on nfs reexports
Keep read and write fds with each nlm_file
lockd: update nlm_lookup_file reexport comment
nlm: minor refactoring
nlm: minor nlm_lookup_file argument change
lockd: lockd server-side shouldn't set fl_ops
SUNRPC: Add documentation for the fail_sunrpc/ directory
SUNRPC: Server-side disconnect injection
SUNRPC: Move client-side disconnect injection
SUNRPC: Add a /sys/kernel/debug/fail_sunrpc/ directory
svcrdma: xpt_bc_xprt is already clear in __svc_rdma_free()
nfsd4: Fix forced-expiry locking
rpc: fix gss_svc_init cleanup on failure
SUNRPC: Add RPC_AUTH_TLS protocol numbers
lockd: change the proc_handler for nsm_use_hostnames
sysctl: introduce new proc handler proc_dobool
SUNRPC: Fix a NULL pointer deref in trace_svc_stats_latency()
...
|
|
Pull io_uring updates from Jens Axboe:
- cancellation cleanups (Hao, Pavel)
- io-wq accounting cleanup (Hao)
- io_uring submit locking fix (Hao)
- io_uring link handling fixes (Hao)
- fixed file improvements (wangyangbo, Pavel)
- allow updates of linked timeouts like regular timeouts (Pavel)
- IOPOLL fix (Pavel)
- remove batched file get optimization (Pavel)
- improve reference handling (Pavel)
- IRQ task_work batching (Pavel)
- allow pure fixed file, and add support for open/accept (Pavel)
- GFP_ATOMIC RT kernel fix
- multiple CQ ring waiter improvement
- funnel IRQ completions through task_work
- add support for limiting async workers explicitly
- add different clocksource support for timeouts
- io-wq wakeup race fix
- lots of cleanups and improvement (Pavel et al)
* tag 'for-5.15/io_uring-2021-08-30' of git://git.kernel.dk/linux-block: (87 commits)
io-wq: fix wakeup race when adding new work
io-wq: wqe and worker locks no longer need to be IRQ safe
io-wq: check max_worker limits if a worker transitions bound state
io_uring: allow updating linked timeouts
io_uring: keep ltimeouts in a list
io_uring: support CLOCK_BOOTTIME/REALTIME for timeouts
io-wq: provide a way to limit max number of workers
io_uring: add build check for buf_index overflows
io_uring: clarify io_req_task_cancel() locking
io_uring: add task-refs-get helper
io_uring: fix failed linkchain code logic
io_uring: remove redundant req_set_fail()
io_uring: don't free request to slab
io_uring: accept directly into fixed file table
io_uring: hand code io_accept() fd installing
io_uring: openat directly into fixed fd table
net: add accept helper not installing fd
io_uring: fix io_try_cancel_userdata race for iowq
io_uring: IRQ rw completion batching
io_uring: batch task work locking
...
|
|
Pull block driver updates from Jens Axboe:
"Sitting on top of the core block changes, here are the driver changes
for the 5.15 merge window:
- NVMe updates via Christoph:
- suspend improvements for devices with an HMB (Keith Busch)
- handle double completions more gacefull (Sagi Grimberg)
- cleanup the selects for the nvme core code a bit (Sagi Grimberg)
- don't update queue count when failing to set io queues (Ruozhu Li)
- various nvmet connect fixes (Amit Engel)
- cleanup lightnvm leftovers (Keith Busch, me)
- small cleanups (Colin Ian King, Hou Pu)
- add tracing for the Set Features command (Hou Pu)
- CMB sysfs cleanups (Keith Busch)
- add a mutex_destroy call (Keith Busch)
- remove lightnvm subsystem. It's served its purpose and ultimately
led to zoned nvme support, we no longer need it (Christoph)
- revert floppy O_NDELAY fix (Denis)
- nbd fixes (Hou, Pavel, Baokun)
- nbd locking fixes (Tetsuo)
- nbd device removal fixes (Christoph)
- raid10 rcu warning fix (Xiao)
- raid1 write behind fix (Guoqing)
- rnbd fixes (Gioh, Md Haris)
- misc fixes (Colin)"
* tag 'for-5.15/drivers-2021-08-30' of git://git.kernel.dk/linux-block: (42 commits)
Revert "floppy: reintroduce O_NDELAY fix"
raid1: ensure write behind bio has less than BIO_MAX_VECS sectors
md/raid10: Remove unnecessary rcu_dereference in raid10_handle_discard
nbd: remove nbd->destroy_complete
nbd: only return usable devices from nbd_find_unused
nbd: set nbd->index before releasing nbd_index_mutex
nbd: prevent IDR lookups from finding partially initialized devices
nbd: reset NBD to NULL when restarting in nbd_genl_connect
nbd: add missing locking to the nbd_dev_add error path
nvme: remove the unused NVME_NS_* enum
nvme: remove nvm_ndev from ns
nvme: Have NVME_FABRICS select NVME_CORE instead of transport drivers
block: nbd: add sanity check for first_minor
nvmet: check that host sqsize does not exceed ctrl MQES
nvmet: avoid duplicate qid in connect cmd
nvmet: pass back cntlid on successful completion
nvme-rdma: don't update queue count when failing to set io queues
nvme-tcp: don't update queue count when failing to set io queues
nvme-tcp: pair send_mutex init with destroy
nvme: allow user toggling hmb usage
...
|
|
Daniel Borkmann says:
====================
bpf-next 2021-08-31
We've added 116 non-merge commits during the last 17 day(s) which contain
a total of 126 files changed, 6813 insertions(+), 4027 deletions(-).
The main changes are:
1) Add opaque bpf_cookie to perf link which the program can read out again,
to be used in libbpf-based USDT library, from Andrii Nakryiko.
2) Add bpf_task_pt_regs() helper to access userspace pt_regs, from Daniel Xu.
3) Add support for UNIX stream type sockets for BPF sockmap, from Jiang Wang.
4) Allow BPF TCP congestion control progs to call bpf_setsockopt() e.g. to switch
to another congestion control algorithm during init, from Martin KaFai Lau.
5) Extend BPF iterator support for UNIX domain sockets, from Kuniyuki Iwashima.
6) Allow bpf_{set,get}sockopt() calls from setsockopt progs, from Prankur Gupta.
7) Add bpf_get_netns_cookie() helper for BPF_PROG_TYPE_{SOCK_OPS,CGROUP_SOCKOPT}
progs, from Xu Liu and Stanislav Fomichev.
8) Support for __weak typed ksyms in libbpf, from Hao Luo.
9) Shrink struct cgroup_bpf by 504 bytes through refactoring, from Dave Marchevsky.
10) Fix a smatch complaint in verifier's narrow load handling, from Andrey Ignatov.
11) Fix BPF interpreter's tail call count limit, from Daniel Borkmann.
12) Big batch of improvements to BPF selftests, from Magnus Karlsson, Li Zhijian,
Yucong Sun, Yonghong Song, Ilya Leoshkevich, Jussi Maki, Ilya Leoshkevich, others.
13) Another big batch to revamp XDP samples in order to give them consistent look
and feel, from Kumar Kartikeya Dwivedi.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (116 commits)
MAINTAINERS: Remove self from powerpc BPF JIT
selftests/bpf: Fix potential unreleased lock
samples: bpf: Fix uninitialized variable in xdp_redirect_cpu
selftests/bpf: Reduce more flakyness in sockmap_listen
bpf: Fix bpf-next builds without CONFIG_BPF_EVENTS
bpf: selftests: Add dctcp fallback test
bpf: selftests: Add connect_to_fd_opts to network_helpers
bpf: selftests: Add sk_state to bpf_tcp_helpers.h
bpf: tcp: Allow bpf-tcp-cc to call bpf_(get|set)sockopt
selftests: xsk: Preface options with opt
selftests: xsk: Make enums lower case
selftests: xsk: Generate packets from specification
selftests: xsk: Generate packet directly in umem
selftests: xsk: Simplify cleanup of ifobjects
selftests: xsk: Decrease sending speed
selftests: xsk: Validate tx stats on tx thread
selftests: xsk: Simplify packet validation in xsk tests
selftests: xsk: Rename worker_* functions that are not thread entry points
selftests: xsk: Disassociate umem size with packets sent
selftests: xsk: Remove end-of-test packet
...
====================
Link: https://lore.kernel.org/r/20210830225618.11634-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Updates for timekeeping, timers and related drivers:
Core code:
- Cure a couple of correctness issues in the posix CPU timer code to
prevent that the tick dependency for NOHZ full is kept alive for no
reason.
- Avoid expensive double reprogramming of the clockevent device in
hrtimer_start_range_ns().
- Avoid pointless SMP function calls when the clock was set to avoid
disturbing CPUs which do not have any affected timers queued.
- Make the clocksource watchdog test work correctly when CONFIG_HZ is
less than 100.
Drivers:
- Prefer the ARM architected timer over the Exynos timer which is way
more expensive to access.
- Add device tree bindings for new Ingenic SoCs
- The usual improvements and cleanups all over the place"
* tag 'timers-core-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (29 commits)
clocksource: Make clocksource watchdog test safe for slow-HZ systems
dt-bindings: timer: Add ABIs for new Ingenic SoCs
clocksource/drivers/fttmr010: Pass around less pointers
clocksource/drivers/mediatek: Optimize systimer irq clear flow on shutdown
clocksource/drivers/ingenic: Use bitfield macro helpers
clocksource/drivers/sh_cmt: Fix wrong setting if don't request IRQ for clock source channel
dt-bindings: timer: convert rockchip,rk-timer.txt to YAML
clocksource/drivers/exynos_mct: Mark MCT device as CLOCK_EVT_FEAT_PERCPU
clocksource/drivers/exynos_mct: Prioritise Arm arch timer on arm64
hrtimer: Unbreak hrtimer_force_reprogram()
hrtimer: Use raw_cpu_ptr() in clock_was_set()
hrtimer: Avoid more SMP function calls in clock_was_set()
hrtimer: Avoid unnecessary SMP function calls in clock_was_set()
hrtimer: Add bases argument to clock_was_set()
time/timekeeping: Avoid invoking clock_was_set() twice
timekeeping: Distangle resume and clock-was-set events
timerfd: Provide timerfd_resume()
hrtimer: Force clock_was_set() handling for the HIGHRES=n, NOHZ=y case
hrtimer: Ensure timerfd notification for HIGHRES=n
hrtimer: Consolidate reprogramming code
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates to the interrupt core and driver subsystems:
Core changes:
- The usual set of small fixes and improvements all over the place,
but nothing stands out
MSI changes:
- Further consolidation of the PCI/MSI interrupt chip code
- Make MSI sysfs code independent of PCI/MSI and expose the MSI
interrupts of platform devices in the same way as PCI exposes them.
Driver changes:
- Support for ARM GICv3 EPPI partitions
- Treewide conversion to generic_handle_domain_irq() for all chained
interrupt controllers
- Conversion to bitmap_zalloc() throughout the irq chip drivers
- The usual set of small fixes and improvements"
* tag 'irq-core-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (57 commits)
platform-msi: Add ABI to show msi_irqs of platform devices
genirq/msi: Move MSI sysfs handling from PCI to MSI core
genirq/cpuhotplug: Demote debug printk to KERN_DEBUG
irqchip/qcom-pdc: Trim unused levels of the interrupt hierarchy
irqdomain: Export irq_domain_disconnect_hierarchy()
irqchip/gic-v3: Fix priority comparison when non-secure priorities are used
irqchip/apple-aic: Fix irq_disable from within irq handlers
pinctrl/rockchip: drop the gpio related codes
gpio/rockchip: drop irq_gc_lock/irq_gc_unlock for irq set type
gpio/rockchip: support next version gpio controller
gpio/rockchip: use struct rockchip_gpio_regs for gpio controller
gpio/rockchip: add driver for rockchip gpio
dt-bindings: gpio: change items restriction of clock for rockchip,gpio-bank
pinctrl/rockchip: add pinctrl device to gpio bank struct
pinctrl/rockchip: separate struct rockchip_pin_bank to a head file
pinctrl/rockchip: always enable clock for gpio controller
genirq: Fix kernel doc indentation
EDAC/altera: Convert to generic_handle_domain_irq()
powerpc: Bulk conversion to generic_handle_domain_irq()
nios2: Bulk conversion to generic_handle_domain_irq()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking and atomics updates from Thomas Gleixner:
"The regular pile:
- A few improvements to the mutex code
- Documentation updates for atomics to clarify the difference between
cmpxchg() and try_cmpxchg() and to explain the forward progress
expectations.
- Simplification of the atomics fallback generator
- The addition of arch_atomic_long*() variants and generic arch_*()
bitops based on them.
- Add the missing might_sleep() invocations to the down*() operations
of semaphores.
The PREEMPT_RT locking core:
- Scheduler updates to support the state preserving mechanism for
'sleeping' spin- and rwlocks on RT.
This mechanism is carefully preserving the state of the task when
blocking on a 'sleeping' spin- or rwlock and takes regular wake-ups
targeted at the same task into account. The preserved or updated
(via a regular wakeup) state is restored when the lock has been
acquired.
- Restructuring of the rtmutex code so it can be utilized and
extended for the RT specific lock variants.
- Restructuring of the ww_mutex code to allow sharing of the ww_mutex
specific functionality for rtmutex based ww_mutexes.
- Header file disentangling to allow substitution of the regular lock
implementations with the PREEMPT_RT variants without creating an
unmaintainable #ifdef mess.
- Shared base code for the PREEMPT_RT specific rw_semaphore and
rwlock implementations.
Contrary to the regular rw_semaphores and rwlocks the PREEMPT_RT
implementation is writer unfair because it is infeasible to do
priority inheritance on multiple readers. Experience over the years
has shown that real-time workloads are not the typical workloads
which are sensitive to writer starvation.
The alternative solution would be to allow only a single reader
which has been tried and discarded as it is a major bottleneck
especially for mmap_sem. Aside of that many of the writer
starvation critical usage sites have been converted to a writer
side mutex/spinlock and RCU read side protections in the past
decade so that the issue is less prominent than it used to be.
- The actual rtmutex based lock substitutions for PREEMPT_RT enabled
kernels which affect mutex, ww_mutex, rw_semaphore, spinlock_t and
rwlock_t. The spin/rw_lock*() functions disable migration across
the critical section to preserve the existing semantics vs per-CPU
variables.
- Rework of the futex REQUEUE_PI mechanism to handle the case of
early wake-ups which interleave with a re-queue operation to
prevent the situation that a task would be blocked on both the
rtmutex associated to the outer futex and the rtmutex based hash
bucket spinlock.
While this situation cannot happen on !RT enabled kernels the
changes make the underlying concurrency problems easier to
understand in general. As a result the difference between !RT and
RT kernels is reduced to the handling of waiting for the critical
section. !RT kernels simply spin-wait as before and RT kernels
utilize rcu_wait().
- The substitution of local_lock for PREEMPT_RT with a spinlock which
protects the critical section while staying preemptible. The CPU
locality is established by disabling migration.
The underlying concepts of this code have been in use in PREEMPT_RT for
way more than a decade. The code has been refactored several times over
the years and this final incarnation has been optimized once again to be
as non-intrusive as possible, i.e. the RT specific parts are mostly
isolated.
It has been extensively tested in the 5.14-rt patch series and it has
been verified that !RT kernels are not affected by these changes"
* tag 'locking-core-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (92 commits)
locking/rtmutex: Return success on deadlock for ww_mutex waiters
locking/rtmutex: Prevent spurious EDEADLK return caused by ww_mutexes
locking/rtmutex: Dequeue waiter on ww_mutex deadlock
locking/rtmutex: Dont dereference waiter lockless
locking/semaphore: Add might_sleep() to down_*() family
locking/ww_mutex: Initialize waiter.ww_ctx properly
static_call: Update API documentation
locking/local_lock: Add PREEMPT_RT support
locking/spinlock/rt: Prepare for RT local_lock
locking/rtmutex: Add adaptive spinwait mechanism
locking/rtmutex: Implement equal priority lock stealing
preempt: Adjust PREEMPT_LOCK_OFFSET for RT
locking/rtmutex: Prevent lockdep false positive with PI futexes
futex: Prevent requeue_pi() lock nesting issue on RT
futex: Simplify handle_early_requeue_pi_wakeup()
futex: Reorder sanity checks in futex_requeue()
futex: Clarify comment in futex_requeue()
futex: Restructure futex_requeue()
futex: Correct the number of requeued waiters for PI
futex: Remove bogus condition for requeue PI
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull SMP core updates from Thomas Gleixner:
- Replace get/put_online_cpus() in various places. The final removal
will happen shortly before v5.15-rc1 when the rest of the patches
have been merged.
- Add debug code to help the analysis of CPU hotplug failures
- A set of kernel doc updates
* tag 'smp-core-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
mm: Replace deprecated CPU-hotplug functions.
md/raid5: Replace deprecated CPU-hotplug functions.
Documentation: Replace deprecated CPU-hotplug functions.
smp: Fix all kernel-doc warnings
cpu/hotplug: Add debug printks for hotplug callback failures
cpu/hotplug: Use DEVICE_ATTR_*() macro
cpu/hotplug: Eliminate all kernel-doc warnings
cpu/hotplug: Fix kernel doc warnings for __cpuhp_setup_state_cpuslocked()
cpu/hotplug: Fix comment typo
smpboot: Replace deprecated CPU-hotplug functions.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf event updates from Ingo Molnar:
- Add support for Intel Sapphire Rapids server CPU uncore events
- Allow the AMD uncore driver to be built as a module
- Misc cleanups and fixes
* tag 'perf-core-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
perf/x86/amd/ibs: Add bitfield definitions in new <asm/amd-ibs.h> header
perf/amd/uncore: Allow the driver to be built as a module
x86/cpu: Add get_llc_id() helper function
perf/amd/uncore: Clean up header use, use <linux/ include paths instead of <asm/
perf/amd/uncore: Simplify code, use free_percpu()'s built-in check for NULL
perf/hw_breakpoint: Replace deprecated CPU-hotplug functions
perf/x86/intel: Replace deprecated CPU-hotplug functions
perf/x86: Remove unused assignment to pointer 'e'
perf/x86/intel/uncore: Fix IIO cleanup mapping procedure for SNR/ICX
perf/x86/intel/uncore: Support IMC free-running counters on Sapphire Rapids server
perf/x86/intel/uncore: Support IIO free-running counters on Sapphire Rapids server
perf/x86/intel/uncore: Factor out snr_uncore_mmio_map()
perf/x86/intel/uncore: Add alias PMU name
perf/x86/intel/uncore: Add Sapphire Rapids server MDF support
perf/x86/intel/uncore: Add Sapphire Rapids server M3UPI support
perf/x86/intel/uncore: Add Sapphire Rapids server UPI support
perf/x86/intel/uncore: Add Sapphire Rapids server M2M support
perf/x86/intel/uncore: Add Sapphire Rapids server IMC support
perf/x86/intel/uncore: Add Sapphire Rapids server PCU support
perf/x86/intel/uncore: Add Sapphire Rapids server M2PCIe support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- The biggest change in this cycle is scheduler support for asymmetric
scheduling affinity, to support the execution of legacy 32-bit tasks
on AArch32 systems that also have 64-bit-only CPUs.
Architectures can fill in this functionality by defining their own
task_cpu_possible_mask(p). When this is done, the scheduler will make
sure the task will only be scheduled on CPUs that support it.
(The actual arm64 specific changes are not part of this tree.)
For other architectures there will be no change in functionality.
- Add cgroup SCHED_IDLE support
- Increase node-distance flexibility & delay determining it until a CPU
is brought online. (This enables platforms where node distance isn't
final until the CPU is only.)
- Deadline scheduler enhancements & fixes
- Misc fixes & cleanups.
* tag 'sched-core-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
eventfd: Make signal recursion protection a task bit
sched/fair: Mark tg_is_idle() an inline in the !CONFIG_FAIR_GROUP_SCHED case
sched: Introduce dl_task_check_affinity() to check proposed affinity
sched: Allow task CPU affinity to be restricted on asymmetric systems
sched: Split the guts of sched_setaffinity() into a helper function
sched: Introduce task_struct::user_cpus_ptr to track requested affinity
sched: Reject CPU affinity changes based on task_cpu_possible_mask()
cpuset: Cleanup cpuset_cpus_allowed_fallback() use in select_fallback_rq()
cpuset: Honour task_cpu_possible_mask() in guarantee_online_cpus()
cpuset: Don't use the cpu_possible_mask as a last resort for cgroup v1
sched: Introduce task_cpu_possible_mask() to limit fallback rq selection
sched: Cgroup SCHED_IDLE support
sched/topology: Skip updating masks for non-online nodes
sched: Replace deprecated CPU-hotplug functions.
sched: Skip priority checks with SCHED_FLAG_KEEP_PARAMS
sched: Fix UCLAMP_FLAG_IDLE setting
sched/deadline: Fix missing clock update in migrate_task_rq_dl()
sched/fair: Avoid a second scan of target in select_idle_cpu
sched/fair: Use prev instead of new target as recent_used_cpu
sched: Don't report SCHED_FLAG_SUGOV in sched_getattr()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- Improve ftrace code patching so that stop_machine is not required
anymore. This requires a small common code patch acked by Steven
Rostedt:
https://lore.kernel.org/linux-s390/20210730220741.4da6fdf6@oasis.local.home/
- Enable KCSAN for s390. This comes with a small common code change to
fix a compile warning. Acked by Marco Elver:
https://lore.kernel.org/r/20210729142811.1309391-1-hca@linux.ibm.com
- Add KFENCE support for s390. This also comes with a minimal x86 patch
from Marco Elver who said also this can be carried via the s390 tree:
https://lore.kernel.org/linux-s390/YQJdarx6XSUQ1tFZ@elver.google.com/
- More changes to prepare the decompressor for relocation.
- Enable DAT also for CPU restart path.
- Final set of register asm removal patches; leaving only three
locations where needed and sane.
- Add NNPA, Vector-Packed-Decimal-Enhancement Facility 2, PCI MIO
support to hwcaps flags.
- Cleanup hwcaps implementation.
- Add new instructions to in-kernel disassembler.
- Various QDIO cleanups.
- Add SCLP debug feature.
- Various other cleanups and improvements all over the place.
* tag 's390-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (105 commits)
s390: remove SCHED_CORE from defconfigs
s390/smp: do not use nodat_stack for secondary CPU start
s390/smp: enable DAT before CPU restart callback is called
s390: update defconfigs
s390/ap: fix state machine hang after failure to enable irq
KVM: s390: generate kvm hypercall functions
s390/sclp: add tracing of SCLP interactions
s390/debug: add early tracing support
s390/debug: fix debug area life cycle
s390/debug: keep debug data on resize
s390/diag: make restart_part2 a local label
s390/mm,pageattr: fix walk_pte_level() early exit
s390: fix typo in linker script
s390: remove do_signal() prototype and do_notify_resume() function
s390/crypto: fix all kernel-doc warnings in vfio_ap_ops.c
s390/pci: improve DMA translation init and exit
s390/pci: simplify CLP List PCI handling
s390/pci: handle FH state mismatch only on disable
s390/pci: fix misleading rc in clp_set_pci_fn()
s390/boot: factor out offset_vmlinux_info() function
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"Algorithms:
- Add AES-NI/AVX/x86_64 implementation of SM4.
Drivers:
- Add Arm SMCCC TRNG based driver"
[ And obviously a lot of random fixes and updates - Linus]
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (84 commits)
crypto: sha512 - remove imaginary and mystifying clearing of variables
crypto: aesni - xts_crypt() return if walk.nbytes is 0
padata: Remove repeated verbose license text
crypto: ccp - Add support for new CCP/PSP device ID
crypto: x86/sm4 - add AES-NI/AVX2/x86_64 implementation
crypto: x86/sm4 - export reusable AESNI/AVX functions
crypto: rmd320 - remove rmd320 in Makefile
crypto: skcipher - in_irq() cleanup
crypto: hisilicon - check _PS0 and _PR0 method
crypto: hisilicon - change parameter passing of debugfs function
crypto: hisilicon - support runtime PM for accelerator device
crypto: hisilicon - add runtime PM ops
crypto: hisilicon - using 'debugfs_create_file' instead of 'debugfs_create_regset32'
crypto: tcrypt - add GCM/CCM mode test for SM4 algorithm
crypto: testmgr - Add GCM/CCM mode test of SM4 algorithm
crypto: tcrypt - Fix missing return value check
crypto: hisilicon/sec - modify the hardware endian configuration
crypto: hisilicon/sec - fix the abnormal exiting process
crypto: qat - store vf.compatible flag
crypto: qat - do not export adf_iov_putmsg()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU updates from Paul McKenney:
"RCU changes for this cycle were:
- Documentation updates
- Miscellaneous fixes
- Offloaded-callbacks updates
- Updates to the nolibc library
- Tasks-RCU updates
- In-kernel torture-test updates
- Torture-test scripting, perhaps most notably the pinning of
torture-test guest OSes so as to force differences in memory
latency. For example, in a two-socket system, a four-CPU guest OS
will have one pair of its CPUs pinned to threads in a single core
on one socket and the other pair pinned to threads in a single core
on the other socket. This approach proved able to force race
conditions that earlier testing missed. Some of these race
conditions are still being tracked down"
* 'core-rcu.2021.08.28a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (61 commits)
torture: Replace deprecated CPU-hotplug functions.
rcu: Replace deprecated CPU-hotplug functions
rcu: Print human-readable message for schedule() in RCU reader
rcu: Explain why rcu_all_qs() is a stub in preemptible TREE RCU
rcu: Use per_cpu_ptr to get the pointer of per_cpu variable
rcu: Remove useless "ret" update in rcu_gp_fqs_loop()
rcu: Mark accesses in tree_stall.h
rcu: Make rcu_gp_init() and rcu_gp_fqs_loop noinline to conserve stack
rcu: Mark lockless ->qsmask read in rcu_check_boost_fail()
srcutiny: Mark read-side data races
rcu: Start timing stall repetitions after warning complete
rcu: Do not disable GP stall detection in rcu_cpu_stall_reset()
rcu/tree: Handle VM stoppage in stall detection
rculist: Unify documentation about missing list_empty_rcu()
rcu: Mark accesses to ->rcu_read_lock_nesting
rcu: Weaken ->dynticks accesses and updates
rcu: Remove special bit at the bottom of the ->dynticks counter
rcu: Fix stall-warning deadlock due to non-release of rcu_node ->lock
rcu: Fix to include first blocked task in stall warning
torture: Make kvm-test-1-run-qemu.sh check for reboot loops
...
|
|
As done before in commit cb4a31675270 ("cgroup: use bitmask to filter
for_each_subsys"), avoid compiler warnings for the pathological case of
having no subsystems (i.e. CGROUP_SUBSYS_COUNT == 0). This condition is
hit for the arm multi_v7_defconfig config under -Wzero-length-bounds:
In file included from ./arch/arm/include/generated/asm/rwonce.h:1,
from include/linux/compiler.h:264,
from include/uapi/linux/swab.h:6,
from include/linux/swab.h:5,
from arch/arm/include/asm/opcodes.h:86,
from arch/arm/include/asm/bug.h:7,
from include/linux/bug.h:5,
from include/linux/thread_info.h:13,
from include/asm-generic/current.h:5,
from ./arch/arm/include/generated/asm/current.h:1,
from include/linux/sched.h:12,
from include/linux/cgroup.h:12,
from kernel/cgroup/cgroup-internal.h:5,
from kernel/cgroup/cgroup.c:31:
kernel/cgroup/cgroup.c: In function 'of_css':
kernel/cgroup/cgroup.c:651:42: warning: array subscript '<unknown>' is outside the bounds of an
interior zero-length array 'struct cgroup_subsys_state *[0]' [-Wzero-length-bounds]
651 | return rcu_dereference_raw(cgrp->subsys[cft->ss->id]);
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Tejun Heo <tj@kernel.org>
Cc: Zefan Li <lizefan.x@bytedance.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: cgroups@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
* pm-pci:
PCI: PM: Enable PME if it can be signaled from D3cold
PCI: PM: Avoid forcing PCI_D0 for wakeup reasons inconsistently
PCI: Use pci_update_current_state() in pci_enable_device_flags()
* pm-sleep:
PM: sleep: unmark 'state' functions as kernel-doc
PM: sleep: check RTC features instead of ops in suspend_test
PM: sleep: s2idle: Replace deprecated CPU-hotplug functions
* pm-domains:
PM: domains: Fix domain attach for CONFIG_PM_OPP=n
arm64: dts: sc7180: Add required-opps for i2c
PM: domains: Add support for 'required-opps' to set default perf state
opp: Don't print an error if required-opps is missing
* powercap:
powercap: Add Power Limit4 support for Alder Lake SoC
powercap: intel_rapl: Replace deprecated CPU-hotplug functions
|
|
* pm-cpufreq:
cpufreq: intel_pstate: Process HWP Guaranteed change notification
thermal: intel: Allow processing of HWP interrupt
cpufreq: schedutil: Use kobject release() method to free sugov_tunables
cpufreq: Replace deprecated CPU-hotplug functions
* pm-cpu:
notifier: Remove atomic_notifier_call_chain_robust()
PM: cpu: Make notifier chain use a raw_spinlock_t
* pm-em:
PM: EM: Increase energy calculation precision
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify updates from Jan Kara:
"fsnotify speedups when notification actually isn't used and support
for identifying processes which caused fanotify events through pidfd
instead of normal pid"
* tag 'fsnotify_for_v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fsnotify: optimize the case of no marks of any type
fsnotify: count all objects with attached connectors
fsnotify: count s_fsnotify_inode_refs for attached connectors
fsnotify: replace igrab() with ihold() on attach connector
fanotify: add pidfd support to the fanotify API
fanotify: introduce a generic info record copying helper
fanotify: minor cosmetic adjustments to fid labels
kernel/pid.c: implement additional checks upon pidfd_create() parameters
kernel/pid.c: remove static qualifier from pidfd_create()
|
|
|
|
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
Pull irqchip updates from Marc Zyngier:
- API updates:
- Treewide conversion to generic_handle_domain_irq() for anything
that looks like a chained interrupt controller
- Update the irqdomain documentation
- Use of bitmap_zalloc() throughout the tree
- New functionalities:
- Support for GICv3 EPPI partitions
- Fixes:
- Qualcomm PDC hierarchy fixes
- Yet another priority decoding fix for the GICv3 pseudo-NMIs
- Fix the apple-aic driver irq_eoi() callback to always unmask
the interrupt
- Properly handle edge interrupts on loongson-pch-pic
- Let the mtk-sysirq driver advertise IRQCHIP_SKIP_SET_WAKE
Link: https://lore.kernel.org/r/20210828121013.2647964-1-maz@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Have get_push_task() check whether current has migration disabled and
thus avoid useless invocations of the migration thread
- Rework initialization flow so that all rq->core's are initialized,
even of CPUs which have not been onlined yet, so that iterating over
them all works as expected
* tag 'sched_urgent_for_v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Fix get_push_task() vs migrate_disable()
sched: Fix Core-wide rq->lock for uninitialized CPUs
|
|
The clocksource watchdog test sets a local JIFFIES_SHIFT macro and assumes
that HZ is >= 100. For smaller HZ values this shift value is too large and
causes undefined behaviour.
Move the HZ-based definitions of JIFFIES_SHIFT from kernel/time/jiffies.c
to kernel/time/tick-internal.h so the clocksource watchdog test can utilize
them, which makes it work correctly with all HZ values.
[ tglx: Resolved conflicts and massaged changelog ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/lkml/20210812000133.GA402890@paulmck-ThinkPad-P17-Gen-1/
|
|
If CONFIG_MODULES is n, we got this:
kernel/printk/index.c:146:13: warning: ‘pi_remove_file’ defined but not used [-Wunused-function]
Move it inside #ifdef block to fix this warning.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210804130105.18732-1-yuehaibing@huawei.com
|
|
ww_mutexes can legitimately cause a deadlock situation in the lock graph
which is resolved afterwards by the wait/wound mechanics. The rtmutex chain
walk can detect such a deadlock and returns EDEADLK which in turn skips the
wait/wound mechanism and returns EDEADLK to the caller. That's wrong
because both lock chains might get EDEADLK or the wrong waiter would back
out.
Detect that situation and return 'success' in case that the waiter which
initiated the chain walk is a ww_mutex with context. This allows the
wait/wound mechanics to resolve the situation according to the rules.
[ tglx: Split it apart and added changelog ]
Reported-by: Sebastian Siewior <bigeasy@linutronix.de>
Fixes: add461325ec5 ("locking/rtmutex: Extend the rtmutex core to support ww_mutex")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/YSeWjCHoK4v5OcOt@hirez.programming.kicks-ass.net
|
|
rtmutex based ww_mutexes can legitimately create a cycle in the lock graph
which can be observed by a blocker which didn't cause the problem:
P1: A, ww_A, ww_B
P2: ww_B, ww_A
P3: A
P3 might therefore be trapped in the ww_mutex induced cycle and run into
the lock depth limitation of rt_mutex_adjust_prio_chain() which returns
-EDEADLK to the caller.
Disable the deadlock detection walk when the chain walk observes a
ww_mutex to prevent this looping.
[ tglx: Split it apart and added changelog ]
Reported-by: Sebastian Siewior <bigeasy@linutronix.de>
Fixes: add461325ec5 ("locking/rtmutex: Extend the rtmutex core to support ww_mutex")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/YSeWjCHoK4v5OcOt@hirez.programming.kicks-ass.net
|
|
remove it because SPDX-License-Identifier is already used
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Acked-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
drivers/net/wwan/mhi_wwan_mbim.c - drop the extra arg.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace get_nr_threads with atomic_read(¤t->signal->live) as
that is a more accurate number that is decremented sooner.
Acked-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/87lf6z6qbd.fsf_-_@disp2133
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes, including fixes from can and bpf.
Closing three hw-dependent regressions. Any fixes of note are in the
'old code' category. Nothing blocking release from our perspective.
Current release - regressions:
- stmmac: revert "stmmac: align RX buffers"
- usb: asix: ax88772: move embedded PHY detection as early as
possible
- usb: asix: do not call phy_disconnect() for ax88178
- Revert "net: really fix the build...", from Kalle to fix QCA6390
Current release - new code bugs:
- phy: mediatek: add the missing suspend/resume callbacks
Previous releases - regressions:
- qrtr: fix another OOB Read in qrtr_endpoint_post
- stmmac: dwmac-rk: fix unbalanced pm_runtime_enable warnings
Previous releases - always broken:
- inet: use siphash in exception handling
- ip_gre: add validation for csum_start
- bpf: fix ringbuf helper function compatibility
- rtnetlink: return correct error on changing device netns
- e1000e: do not try to recover the NVM checksum on Tiger Lake"
* tag 'net-5.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (43 commits)
Revert "net: really fix the build..."
net: hns3: fix get wrong pfc_en when query PFC configuration
net: hns3: fix GRO configuration error after reset
net: hns3: change the method of getting cmd index in debugfs
net: hns3: fix duplicate node in VLAN list
net: hns3: fix speed unknown issue in bond 4
net: hns3: add waiting time before cmdq memory is released
net: hns3: clear hardware resource when loading driver
net: fix NULL pointer reference in cipso_v4_doi_free
rtnetlink: Return correct error on changing device netns
net: dsa: hellcreek: Adjust schedule look ahead window
net: dsa: hellcreek: Fix incorrect setting of GCL
cxgb4: dont touch blocked freelist bitmap after free
ipv4: use siphash instead of Jenkins in fnhe_hashfun()
ipv6: use siphash in rt6_exception_hash()
can: usb: esd_usb2: esd_usb2_rx_event(): fix the interchange of the CAN RX and TX error counters
net: usb: asix: ax88772: fix boolconv.cocci warnings
net/sched: ets: fix crash when flipping from 'strict' to 'quantum'
qede: Fix memset corruption
net: stmmac: fix kernel panic due to NULL pointer dereference of buf->xdp
...
|
|
push_rt_task() attempts to move the currently running task away if the
next runnable task has migration disabled and therefore is pinned on the
current CPU.
The current task is retrieved via get_push_task() which only checks for
nr_cpus_allowed == 1, but does not check whether the task has migration
disabled and therefore cannot be moved either. The consequence is a
pointless invocation of the migration thread which correctly observes
that the task cannot be moved.
Return NULL if the task has migration disabled and cannot be moved to
another CPU.
Fixes: a7c81556ec4d3 ("sched: Fix migrate_disable() vs rt/dl balancing")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210826133738.yiotqbtdaxzjsnfj@linutronix.de
|
|
Factor out force_sig_seccomp from the seccomp signal generation and
place it in kernel/signal.c. The function force_sig_seccomp takes a
parameter force_coredump to indicate that the sigaction field should
be reset to SIGDFL so that a coredump will be generated when the
signal is delivered.
force_sig_seccomp is then used to replace both seccomp_send_sigsys
and seccomp_init_siginfo.
force_sig_info_to_task gains an extra parameter to force using
the default signal action.
With this change seccomp is no longer a special case and there
becomes exactly one place do_coredump is called from.
Further it no longer becomes necessary for __seccomp_filter
to call do_group_exit.
Acked-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/87r1gr6qc4.fsf_-_@disp2133
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
It's not actually used in the !CONFIG_FAIR_GROUP_SCHED case:
kernel/sched/fair.c:488:12: warning: ‘tg_is_idle’ defined but not used [-Wunused-function]
Keep around a placeholder nevertheless, for API completeness. Mark it inline,
so the compiler doesn't think it must be used.
Fixes: 304000390f88: ("sched: Cgroup SCHED_IDLE support")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Josh Don <joshdon@google.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
|
|
The functions get_online_cpus() and put_online_cpus() have been
deprecated during the CPU hotplug rework. They map directly to
cpus_read_lock() and cpus_read_unlock().
Replace deprecated CPU-hotplug functions with the official version.
The behavior remains unchanged.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210803141621.780504-12-bigeasy@linutronix.de
|
|
This commit fixes linker errors along the lines of:
s390-linux-ld: task_iter.c:(.init.text+0xa4): undefined reference to `btf_task_struct_ids'`
Fix by defining btf_task_struct_ids unconditionally in kernel/bpf/btf.c
since there exists code that unconditionally uses btf_task_struct_ids.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/05d94748d9f4b3eecedc4fddd6875418a396e23c.1629942444.git.dxu@dxuuu.xyz
|
|
This patch allows the bpf-tcp-cc to call bpf_setsockopt. One use
case is to allow a bpf-tcp-cc switching to another cc during init().
For example, when the tcp flow is not ecn ready, the bpf_dctcp
can switch to another cc by calling setsockopt(TCP_CONGESTION).
During setsockopt(TCP_CONGESTION), the new tcp-cc's init() will be
called and this could cause a recursion but it is stopped by the
current trampoline's logic (in the prog->active counter).
While retiring a bpf-tcp-cc (e.g. in tcp_v[46]_destroy_sock()),
the tcp stack calls bpf-tcp-cc's release(). To avoid the retiring
bpf-tcp-cc making further changes to the sk, bpf_setsockopt is not
available to the bpf-tcp-cc's release(). This will avoid release()
making setsockopt() call that will potentially allocate new resources.
Although the bpf-tcp-cc already has a more powerful way to read tcp_sock
from the PTR_TO_BTF_ID, it is usually expected that bpf_getsockopt and
bpf_setsockopt are available together. Thus, bpf_getsockopt() is also
added to all tcp_congestion_ops except release().
When the old bpf-tcp-cc is calling setsockopt(TCP_CONGESTION)
to switch to a new cc, the old bpf-tcp-cc will be released by
bpf_struct_ops_put(). Thus, this patch also puts the bpf_struct_ops_map
after a rcu grace period because the trampoline's image cannot be freed
while the old bpf-tcp-cc is still running.
bpf-tcp-cc can only access icsk_ca_priv as SCALAR. All kernel's
tcp-cc is also accessing the icsk_ca_priv as SCALAR. The size
of icsk_ca_priv has already been raised a few times to avoid
extra kmalloc and memory referencing. The only exception is the
kernel's tcp_cdg.c that stores a kmalloc()-ed pointer in icsk_ca_priv.
To avoid the old bpf-tcp-cc accidentally overriding this tcp_cdg's pointer
value stored in icsk_ca_priv after switching and without over-complicating
the bpf's verifier for this one exception in tcp_cdg, this patch does not
allow switching to tcp_cdg. If there is a need, bpf_tcp_cdg can be
implemented and then use the bpf_sk_storage as the extended storage.
bpf_sk_setsockopt proto has only been recently added and used
in bpf-sockopt and bpf-iter-tcp, so impose the tcp_cdg limitation in the
same proto instead of adding a new proto specifically for bpf-tcp-cc.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210824173007.3976921-1-kafai@fb.com
|
|
The motivation behind this helper is to access userspace pt_regs in a
kprobe handler.
uprobe's ctx is the userspace pt_regs. kprobe's ctx is the kernelspace
pt_regs. bpf_task_pt_regs() allows accessing userspace pt_regs in a
kprobe handler. The final case (kernelspace pt_regs in uprobe) is
pretty rare (usermode helper) so I think that can be solved later if
necessary.
More concretely, this helper is useful in doing BPF-based DWARF stack
unwinding. Currently the kernel can only do framepointer based stack
unwinds for userspace code. This is because the DWARF state machines are
too fragile to be computed in kernelspace [0]. The idea behind
DWARF-based stack unwinds w/ BPF is to copy a chunk of the userspace
stack (while in prog context) and send it up to userspace for unwinding
(probably with libunwind) [1]. This would effectively enable profiling
applications with -fomit-frame-pointer using kprobes and uprobes.
[0]: https://lkml.org/lkml/2012/2/10/356
[1]: https://github.com/danobi/bpf-dwarf-walk
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/e2718ced2d51ef4268590ab8562962438ab82815.1629772842.git.dxu@dxuuu.xyz
|
|
bpf_get_current_task() is already supported so it's natural to also
include the _btf() variant for btf-powered helpers.
This is required for non-tracing progs to use bpf_task_pt_regs() in the
next commit.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/f99870ed5f834c9803d73b3476f8272b1bb987c0.1629772842.git.dxu@dxuuu.xyz
|
|
No need to have it defined 5 times. Once is enough.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/6dcefa5bed26fe1226f26683f36819bb53ec19a2.1629772842.git.dxu@dxuuu.xyz
|