Age | Commit message (Collapse) | Author | Files | Lines |
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-10-26
We've added 51 non-merge commits during the last 10 day(s) which contain
a total of 75 files changed, 5037 insertions(+), 200 deletions(-).
The main changes are:
1) Add open-coded task, css_task and css iterator support.
One of the use cases is customizable OOM victim selection via BPF,
from Chuyi Zhou.
2) Fix BPF verifier's iterator convergence logic to use exact states
comparison for convergence checks, from Eduard Zingerman,
Andrii Nakryiko and Alexei Starovoitov.
3) Add BPF programmable net device where bpf_mprog defines the logic
of its xmit routine. It can operate in L3 and L2 mode,
from Daniel Borkmann and Nikolay Aleksandrov.
4) Batch of fixes for BPF per-CPU kptr and re-enable unit_size checking
for global per-CPU allocator, from Hou Tao.
5) Fix libbpf which eagerly assumed that SHT_GNU_verdef ELF section
was going to be present whenever a binary has SHT_GNU_versym section,
from Andrii Nakryiko.
6) Fix BPF ringbuf correctness to fold smp_mb__before_atomic() into
atomic_set_release(), from Paul E. McKenney.
7) Add a warning if NAPI callback missed xdp_do_flush() under
CONFIG_DEBUG_NET which helps checking if drivers were missing
the former, from Sebastian Andrzej Siewior.
8) Fix missed RCU read-lock in bpf_task_under_cgroup() which was throwing
a warning under sleepable programs, from Yafang Shao.
9) Avoid unnecessary -EBUSY from htab_lock_bucket by disabling IRQ before
checking map_locked, from Song Liu.
10) Make BPF CI linked_list failure test more robust,
from Kumar Kartikeya Dwivedi.
11) Enable samples/bpf to be built as PIE in Fedora, from Viktor Malik.
12) Fix xsk starving when multiple xsk sockets were associated with
a single xsk_buff_pool, from Albert Huang.
13) Clarify the signed modulo implementation for the BPF ISA standardization
document that it uses truncated division, from Dave Thaler.
14) Improve BPF verifier's JEQ/JNE branch taken logic to also consider
signed bounds knowledge, from Andrii Nakryiko.
15) Add an option to XDP selftests to use multi-buffer AF_XDP
xdp_hw_metadata and mark used XDP programs as capable to use frags,
from Larysa Zaremba.
16) Fix bpftool's BTF dumper wrt printing a pointer value and another
one to fix struct_ops dump in an array, from Manu Bretelle.
* tag 'for-netdev' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (51 commits)
netkit: Remove explicit active/peer ptr initialization
selftests/bpf: Fix selftests broken by mitigations=off
samples/bpf: Allow building with custom bpftool
samples/bpf: Fix passing LDFLAGS to libbpf
samples/bpf: Allow building with custom CFLAGS/LDFLAGS
bpf: Add more WARN_ON_ONCE checks for mismatched alloc and free
selftests/bpf: Add selftests for netkit
selftests/bpf: Add netlink helper library
bpftool: Extend net dump with netkit progs
bpftool: Implement link show support for netkit
libbpf: Add link-based API for netkit
tools: Sync if_link uapi header
netkit, bpf: Add bpf programmable net device
bpf: Improve JEQ/JNE branch taken logic
bpf: Fold smp_mb__before_atomic() into atomic_set_release()
bpf: Fix unnecessary -EBUSY from htab_lock_bucket
xsk: Avoid starving the xsk further down the list
bpf: print full verifier states on infinite loop detection
selftests/bpf: test if state loops are detected in a tricky case
bpf: correct loop detection for iterators convergence
...
====================
Link: https://lore.kernel.org/r/20231026150509.2824-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
net/mac80211/rx.c
91535613b609 ("wifi: mac80211: don't drop all unprotected public action frames")
6c02fab72429 ("wifi: mac80211: split ieee80211_drop_unencrypted_mgmt() return value")
Adjacent changes:
drivers/net/ethernet/apm/xgene/xgene_enet_main.c
61471264c018 ("net: ethernet: apm: Convert to platform remove callback returning void")
d2ca43f30611 ("net: xgene: Fix unused xgene_enet_of_match warning for !CONFIG_OF")
net/vmw_vsock/virtio_transport.c
64c99d2d6ada ("vsock/virtio: support to send non-linear skb")
53b08c498515 ("vsock/virtio: initialize the_virtio_vsock before using VQs")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are two possible mismatched alloc and free cases in BPF memory
allocator:
1) allocate from cache X but free by cache Y with a different unit_size
2) allocate from per-cpu cache but free by kmalloc cache or vice versa
So add more WARN_ON_ONCE checks in free_bulk() and __free_by_rcu() to
spot these mismatched alloc and free early.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20231021014959.3563841-1-houtao@huaweicloud.com
|
|
This work adds a new, minimal BPF-programmable device called "netkit"
(former PoC code-name "meta") we recently presented at LSF/MM/BPF. The
core idea is that BPF programs are executed within the drivers xmit routine
and therefore e.g. in case of containers/Pods moving BPF processing closer
to the source.
One of the goals was that in case of Pod egress traffic, this allows to
move BPF programs from hostns tcx ingress into the device itself, providing
earlier drop or forward mechanisms, for example, if the BPF program
determines that the skb must be sent out of the node, then a redirect to
the physical device can take place directly without going through per-CPU
backlog queue. This helps to shift processing for such traffic from softirq
to process context, leading to better scheduling decisions/performance (see
measurements in the slides).
In this initial version, the netkit device ships as a pair, but we plan to
extend this further so it can also operate in single device mode. The pair
comes with a primary and a peer device. Only the primary device, typically
residing in hostns, can manage BPF programs for itself and its peer. The
peer device is designated for containers/Pods and cannot attach/detach
BPF programs. Upon the device creation, the user can set the default policy
to 'pass' or 'drop' for the case when no BPF program is attached.
Additionally, the device can be operated in L3 (default) or L2 mode. The
management of BPF programs is done via bpf_mprog, so that multi-attach is
supported right from the beginning with similar API and dependency controls
as tcx. For details on the latter see commit 053c8e1f235d ("bpf: Add generic
attach/detach/query API for multi-progs"). tc BPF compatibility is provided,
so that existing programs can be easily migrated.
Going forward, we plan to use netkit devices in Cilium as the main device
type for connecting Pods. They will be operated in L3 mode in order to
simplify a Pod's neighbor management and the peer will operate in default
drop mode, so that no traffic is leaving between the time when a Pod is
brought up by the CNI plugin and programs attached by the agent.
Additionally, the programs we attach via tcx on the physical devices are
using bpf_redirect_peer() for inbound traffic into netkit device, hence the
latter is also supporting the ndo_get_peer_dev callback. Similarly, we use
bpf_redirect_neigh() for the way out, pushing from netkit peer to phys device
directly. Also, BIG TCP is supported on netkit device. For the follow-up
work in single device mode, we plan to convert Cilium's cilium_host/_net
devices into a single one.
An extensive test suite for checking device operations and the BPF program
and link management API comes as BPF selftests in this series.
Co-developed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://github.com/borkmann/iproute2/tree/pr/netkit
Link: http://vger.kernel.org/bpfconf2023_material/tcx_meta_netdev_borkmann.pdf (24ff.)
Link: https://lore.kernel.org/r/20231024214904.29825-2-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
When determining if an if/else branch will always or never be taken, use
signed range knowledge in addition to currently used unsigned range knowledge.
If either signed or unsigned range suggests that condition is always/never
taken, return corresponding branch_taken verdict.
Current use of unsigned range for this seems arbitrary and unnecessarily
incomplete. It is possible for *signed* operations to be performed on
register, which could "invalidate" unsigned range for that register. In such
case branch_taken will be artificially useless, even if we can still tell
that some constant is outside of register value range based on its signed
bounds.
veristat-based validation shows zero differences across selftests, Cilium,
and Meta-internal BPF object files.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Link: https://lore.kernel.org/bpf/20231022205743.72352-2-andrii@kernel.org
|
|
The bpf_user_ringbuf_drain() BPF_CALL function uses an atomic_set()
immediately preceded by smp_mb__before_atomic() so as to order storing
of ring-buffer consumer and producer positions prior to the atomic_set()
call's clearing of the ->busy flag, as follows:
smp_mb__before_atomic();
atomic_set(&rb->busy, 0);
Although this works given current architectures and implementations, and
given that this only needs to order prior writes against a later write.
However, it does so by accident because the smp_mb__before_atomic()
is only guaranteed to work with read-modify-write atomic operations, and
not at all with things like atomic_set() and atomic_read().
Note especially that smp_mb__before_atomic() will not, repeat *not*,
order the prior write to "a" before the subsequent non-read-modify-write
atomic read from "b", even on strongly ordered systems such as x86:
WRITE_ONCE(a, 1);
smp_mb__before_atomic();
r1 = atomic_read(&b);
Therefore, replace the smp_mb__before_atomic() and atomic_set() with
atomic_set_release() as follows:
atomic_set_release(&rb->busy, 0);
This is no slower (and sometimes is faster) than the original, and also
provides a formal guarantee of ordering that the original lacks.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/bpf/ec86d38e-cfb4-44aa-8fdb-6c925922d93c@paulmck-laptop
|
|
htab_lock_bucket uses the following logic to avoid recursion:
1. preempt_disable();
2. check percpu counter htab->map_locked[hash] for recursion;
2.1. if map_lock[hash] is already taken, return -BUSY;
3. raw_spin_lock_irqsave();
However, if an IRQ hits between 2 and 3, BPF programs attached to the IRQ
logic will not able to access the same hash of the hashtab and get -EBUSY.
This -EBUSY is not really necessary. Fix it by disabling IRQ before
checking map_locked:
1. preempt_disable();
2. local_irq_save();
3. check percpu counter htab->map_locked[hash] for recursion;
3.1. if map_lock[hash] is already taken, return -BUSY;
4. raw_spin_lock().
Similarly, use raw_spin_unlock() and local_irq_restore() in
htab_unlock_bucket().
Fixes: 20b6cc34ea74 ("bpf: Avoid hashtab deadlock with map_locked")
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/7a9576222aa40b1c84ad3a9ba3e64011d1a04d41.camel@linux.ibm.com
Link: https://lore.kernel.org/bpf/20231012055741.3375999-1-song@kernel.org
|
|
Additional logging in is_state_visited(): if infinite loop is detected
print full verifier state for both current and equivalent states.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231024000917.12153-8-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
It turns out that .branches > 0 in is_state_visited() is not a
sufficient condition to identify if two verifier states form a loop
when iterators convergence is computed. This commit adds logic to
distinguish situations like below:
(I) initial (II) initial
| |
V V
.---------> hdr ..
| | |
| V V
| .------... .------..
| | | | |
| V V V V
| ... ... .-> hdr ..
| | | | | |
| V V | V V
| succ <- cur | succ <- cur
| | | |
| V | V
| ... | ...
| | | |
'----' '----'
For both (I) and (II) successor 'succ' of the current state 'cur' was
previously explored and has branches count at 0. However, loop entry
'hdr' corresponding to 'succ' might be a part of current DFS path.
If that is the case 'succ' and 'cur' are members of the same loop
and have to be compared exactly.
Co-developed-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Co-developed-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Reviewed-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231024000917.12153-6-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Convergence for open coded iterators is computed in is_state_visited()
by examining states with branches count > 1 and using states_equal().
states_equal() computes sub-state relation using read and precision marks.
Read and precision marks are propagated from children states,
thus are not guaranteed to be complete inside a loop when branches
count > 1. This could be demonstrated using the following unsafe program:
1. r7 = -16
2. r6 = bpf_get_prandom_u32()
3. while (bpf_iter_num_next(&fp[-8])) {
4. if (r6 != 42) {
5. r7 = -32
6. r6 = bpf_get_prandom_u32()
7. continue
8. }
9. r0 = r10
10. r0 += r7
11. r8 = *(u64 *)(r0 + 0)
12. r6 = bpf_get_prandom_u32()
13. }
Here verifier would first visit path 1-3, create a checkpoint at 3
with r7=-16, continue to 4-7,3 with r7=-32.
Because instructions at 9-12 had not been visitied yet existing
checkpoint at 3 does not have read or precision mark for r7.
Thus states_equal() would return true and verifier would discard
current state, thus unsafe memory access at 11 would not be caught.
This commit fixes this loophole by introducing exact state comparisons
for iterator convergence logic:
- registers are compared using regs_exact() regardless of read or
precision marks;
- stack slots have to have identical type.
Unfortunately, this is too strict even for simple programs like below:
i = 0;
while(iter_next(&it))
i++;
At each iteration step i++ would produce a new distinct state and
eventually instruction processing limit would be reached.
To avoid such behavior speculatively forget (widen) range for
imprecise scalar registers, if those registers were not precise at the
end of the previous iteration and do not match exactly.
This a conservative heuristic that allows to verify wide range of
programs, however it precludes verification of programs that conjure
an imprecise value on the first loop iteration and use it as precise
on the second.
Test case iter_task_vma_for_each() presents one of such cases:
unsigned int seen = 0;
...
bpf_for_each(task_vma, vma, task, 0) {
if (seen >= 1000)
break;
...
seen++;
}
Here clang generates the following code:
<LBB0_4>:
24: r8 = r6 ; stash current value of
... body ... 'seen'
29: r1 = r10
30: r1 += -0x8
31: call bpf_iter_task_vma_next
32: r6 += 0x1 ; seen++;
33: if r0 == 0x0 goto +0x2 <LBB0_6> ; exit on next() == NULL
34: r7 += 0x10
35: if r8 < 0x3e7 goto -0xc <LBB0_4> ; loop on seen < 1000
<LBB0_6>:
... exit ...
Note that counter in r6 is copied to r8 and then incremented,
conditional jump is done using r8. Because of this precision mark for
r6 lags one state behind of precision mark on r8 and widening logic
kicks in.
Adding barrier_var(seen) after conditional is sufficient to force
clang use the same register for both counting and conditional jump.
This issue was discussed in the thread [1] which was started by
Andrew Werner <awerner32@gmail.com> demonstrating a similar bug
in callback functions handling. The callbacks would be addressed
in a followup patch.
[1] https://lore.kernel.org/bpf/97a90da09404c65c8e810cf83c94ac703705dc0e.camel@gmail.com/
Co-developed-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Co-developed-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231024000917.12153-4-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Extract same_callsites() from clean_live_states() as a utility function.
This function would be used by the next patch in the set.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231024000917.12153-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Subsequent patches would make use of explored_state() function.
Move it up to avoid adding unnecessary prototype.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231024000917.12153-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Small clean up to get rid of the extra tcx_link_const() and only retain
the tcx_link().
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20231023185015.21152-1-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Ingo Molnar:
"Fix a recently introduced use-after-free bug"
* tag 'sched-urgent-2023-10-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/eevdf: Fix heap corruption more
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events fix from Ingo Molnar:
"Fix group event semantics"
* tag 'perf-urgent-2023-10-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Disallow mis-matched inherited group reads
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fixes from Masami Hiramatsu:
- kprobe-events: Fix kprobe events to reject if the attached symbol is
not unique name because it may not the function which the user want
to attach to. (User can attach a probe to such symbol using the
nearest unique symbol + offset.)
- selftest: Add a testcase to ensure the kprobe event rejects non
unique symbol correctly.
* tag 'probes-fixes-v6.6-rc6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
selftests/ftrace: Add new test case which checks non unique symbol
tracing/kprobes: Return EADDRNOTAVAIL when func matches several symbols
|
|
The following warning was reported when running "./test_progs -t
test_bpf_ma/percpu_free_through_map_free":
------------[ cut here ]------------
WARNING: CPU: 1 PID: 68 at kernel/bpf/memalloc.c:342
CPU: 1 PID: 68 Comm: kworker/u16:2 Not tainted 6.6.0-rc2+ #222
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
Workqueue: events_unbound bpf_map_free_deferred
RIP: 0010:bpf_mem_refill+0x21c/0x2a0
......
Call Trace:
<IRQ>
? bpf_mem_refill+0x21c/0x2a0
irq_work_single+0x27/0x70
irq_work_run_list+0x2a/0x40
irq_work_run+0x18/0x40
__sysvec_irq_work+0x1c/0xc0
sysvec_irq_work+0x73/0x90
</IRQ>
<TASK>
asm_sysvec_irq_work+0x1b/0x20
RIP: 0010:unit_free+0x50/0x80
......
bpf_mem_free+0x46/0x60
__bpf_obj_drop_impl+0x40/0x90
bpf_obj_free_fields+0x17d/0x1a0
array_map_free+0x6b/0x170
bpf_map_free_deferred+0x54/0xa0
process_scheduled_works+0xba/0x370
worker_thread+0x16d/0x2e0
kthread+0x105/0x140
ret_from_fork+0x39/0x60
ret_from_fork_asm+0x1b/0x30
</TASK>
---[ end trace 0000000000000000 ]---
The reason is simple: __bpf_obj_drop_impl() does not know the freeing
field is a per-cpu pointer and it uses bpf_global_ma to free the
pointer. Because bpf_global_ma is not a per-cpu allocator, so ksize() is
used to select the corresponding cache. The bpf_mem_cache with 16-bytes
unit_size will always be selected to do the unmatched free and it will
trigger the warning in free_bulk() eventually.
Because per-cpu kptr doesn't support list or rb-tree now, so fix the
problem by only checking whether or not the type of kptr is per-cpu in
bpf_obj_free_fields(), and using bpf_global_percpu_ma to these kptrs.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231020133202.4043247-7-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
both syscall.c and helpers.c have the declaration of
__bpf_obj_drop_impl(), so just move it to a common header file.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231020133202.4043247-6-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
For bpf_global_percpu_ma, the pointer passed to bpf_mem_free_rcu() is
allocated by kmalloc() and its size is fixed (16-bytes on x86-64). So
no matter which cache allocates the dynamic per-cpu area, on x86-64
cache[2] will always be used to free the per-cpu area.
Fix the unbalance by checking whether the bpf memory allocator is
per-cpu or not and use pcpu_alloc_size() instead of ksize() to
find the correct cache for per-cpu free.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231020133202.4043247-5-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
With pcpu_alloc_size() in place, check whether or not the size of
the dynamic per-cpu area is matched with unit_size.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231020133202.4043247-4-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When a kprobe is attached to a function that's name is not unique (is
static and shares the name with other functions in the kernel), the
kprobe is attached to the first function it finds. This is a bug as the
function that it is attaching to is not necessarily the one that the
user wants to attach to.
Instead of blindly picking a function to attach to what is ambiguous,
error with EADDRNOTAVAIL to let the user know that this function is not
unique, and that the user must use another unique function with an
address offset to get to the function they want to attach to.
Link: https://lore.kernel.org/all/20231020104250.9537-2-flaniel@linux.microsoft.com/
Cc: stable@vger.kernel.org
Fixes: 413d37d1eb69 ("tracing: Add kprobe-based event tracer")
Suggested-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Francis Laniel <flaniel@linux.microsoft.com>
Link: https://lore.kernel.org/lkml/20230819101105.b0c104ae4494a7d1f2eea742@kernel.org/
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
When using task_iter to iterate all threads of a specific task, we enforce
that the user must pass a valid task pointer to ensure safety. However,
when iterating all threads/process in the system, BPF verifier still
require a valid ptr instead of "nullable" pointer, even though it's
pointless, which is a kind of surprising from usability standpoint. It
would be nice if we could let that kfunc accept a explicit null pointer
when we are using BPF_TASK_ITER_ALL_{PROCS, THREADS} and a valid pointer
when using BPF_TASK_ITER_THREAD.
Given a trival kfunc:
__bpf_kfunc void FN(struct TYPE_A *obj);
BPF Prog would reject a nullptr for obj. The error info is:
"arg#x pointer type xx xx must point to scalar, or struct with scalar"
reported by get_kfunc_ptr_arg_type(). The reg->type is SCALAR_VALUE and
the btf type of ref_t is not scalar or scalar_struct which leads to the
rejection of get_kfunc_ptr_arg_type.
This patch add "__nullable" annotation:
__bpf_kfunc void FN(struct TYPE_A *obj__nullable);
Here __nullable indicates obj can be optional, user can pass a explicit
nullptr or a normal TYPE_A pointer. In get_kfunc_ptr_arg_type(), we will
detect whether the current arg is optional and register is null, If so,
return a new kfunc_ptr_arg_type KF_ARG_PTR_TO_NULL and skip to the next
arg in check_kfunc_args().
Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231018061746.111364-7-zhouchuyi@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
css_iter and task_iter should be used in rcu section. Specifically, in
sleepable progs explicit bpf_rcu_read_lock() is needed before use these
iters. In normal bpf progs that have implicit rcu_read_lock(), it's OK to
use them directly.
This patch adds a new a KF flag KF_RCU_PROTECTED for bpf_iter_task_new and
bpf_iter_css_new. It means the kfunc should be used in RCU CS. We check
whether we are in rcu cs before we want to invoke this kfunc. If the rcu
protection is guaranteed, we would let st->type = PTR_TO_STACK | MEM_RCU.
Once user do rcu_unlock during the iteration, state MEM_RCU of regs would
be cleared. is_iter_reg_valid_init() will reject if reg->type is UNTRUSTED.
It is worth noting that currently, bpf_rcu_read_unlock does not
clear the state of the STACK_ITER reg, since bpf_for_each_spilled_reg
only considers STACK_SPILL. This patch also let bpf_for_each_spilled_reg
search STACK_ITER.
Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231018061746.111364-6-zhouchuyi@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This Patch adds kfuncs bpf_iter_css_{new,next,destroy} which allow
creation and manipulation of struct bpf_iter_css in open-coded iterator
style. These kfuncs actually wrapps css_next_descendant_{pre, post}.
css_iter can be used to:
1) iterating a sepcific cgroup tree with pre/post/up order
2) iterating cgroup_subsystem in BPF Prog, like
for_each_mem_cgroup_tree/cpuset_for_each_descendant_pre in kernel.
The API design is consistent with cgroup_iter. bpf_iter_css_new accepts
parameters defining iteration order and starting css. Here we also reuse
BPF_CGROUP_ITER_DESCENDANTS_PRE, BPF_CGROUP_ITER_DESCENDANTS_POST,
BPF_CGROUP_ITER_ANCESTORS_UP enums.
Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20231018061746.111364-5-zhouchuyi@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch adds kfuncs bpf_iter_task_{new,next,destroy} which allow
creation and manipulation of struct bpf_iter_task in open-coded iterator
style. BPF programs can use these kfuncs or through bpf_for_each macro to
iterate all processes in the system.
The API design keep consistent with SEC("iter/task"). bpf_iter_task_new()
accepts a specific task and iterating type which allows:
1. iterating all process in the system (BPF_TASK_ITER_ALL_PROCS)
2. iterating all threads in the system (BPF_TASK_ITER_ALL_THREADS)
3. iterating all threads of a specific task (BPF_TASK_ITER_PROC_THREADS)
Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Link: https://lore.kernel.org/r/20231018061746.111364-4-zhouchuyi@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch adds kfuncs bpf_iter_css_task_{new,next,destroy} which allow
creation and manipulation of struct bpf_iter_css_task in open-coded
iterator style. These kfuncs actually wrapps css_task_iter_{start,next,
end}. BPF programs can use these kfuncs through bpf_for_each macro for
iteration of all tasks under a css.
css_task_iter_*() would try to get the global spin-lock *css_set_lock*, so
the bpf side has to be careful in where it allows to use this iter.
Currently we only allow it in bpf_lsm and bpf iter-s.
Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20231018061746.111364-3-zhouchuyi@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch makes some preparations for using css_task_iter_*() in BPF
Program.
1. Flags CSS_TASK_ITER_* are #define-s and it's not easy for bpf prog to
use them. Convert them to enum so bpf prog can take them from vmlinux.h.
2. In the next patch we will add css_task_iter_*() in common kfuncs which
is not safe. Since css_task_iter_*() does spin_unlock_irq() which might
screw up irq flags depending on the context where bpf prog is running.
So we should use irqsave/irqrestore here and the switching is harmless.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20231018061746.111364-2-zhouchuyi@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
net/mac80211/key.c
02e0e426a2fb ("wifi: mac80211: fix error path key leak")
2a8b665e6bcc ("wifi: mac80211: remove key_mtx")
7d6904bf26b9 ("Merge wireless into wireless-next")
https://lore.kernel.org/all/20231012113648.46eea5ec@canb.auug.org.au/
Adjacent changes:
drivers/net/ethernet/ti/Kconfig
a602ee3176a8 ("net: ethernet: ti: Fix mixed module-builtin object")
98bdeae9502b ("net: cpmac: remove driver to prepare for platform removal")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fix from Christian Brauner:
"An openat() call from io_uring triggering an audit call can apparently
cause the refcount of struct filename to be incremented from multiple
threads concurrently during async execution, triggering a refcount
underflow and hitting a BUG_ON(). That bug has been lurking around
since at least v5.16 apparently.
Switch to an atomic counter to fix that. The underflow check is
downgraded from a BUG_ON() to a WARN_ON_ONCE() but we could easily
remove that check altogether tbh"
* tag 'v6.6-rc7.vfs.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
audit,io_uring: io_uring openat triggers audit reference count underflow
|
|
Because group consistency is non-atomic between parent (filedesc) and children
(inherited) events, it is possible for PERF_FORMAT_GROUP read() to try and sum
non-matching counter groups -- with non-sensical results.
Add group_generation to distinguish the case where a parent group removes and
adds an event and thus has the same number, but a different configuration of
events as inherited groups.
This became a problem when commit fa8c269353d5 ("perf/core: Invert
perf_read_group() loops") flipped the order of child_list and sibling_list.
Previously it would iterate the group (sibling_list) first, and for each
sibling traverse the child_list. In this order, only the group composition of
the parent is relevant. By flipping the order the group composition of the
child (inherited) events becomes an issue and the mis-match in group
composition becomes evident.
That said; even prior to this commit, while reading of a group that is not
equally inherited was not broken, it still made no sense.
(Ab)use ECHILD as error return to indicate issues with child process group
composition.
Fixes: fa8c269353d5 ("perf/core: Invert perf_read_group() loops")
Reported-by: Budimir Markovic <markovicbudimir@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20231018115654.GK33217@noisy.programming.kicks-ass.net
|
|
Because someone is a flaming idiot... and forgot we have current as
se->on_rq but not actually in the tree itself, and walking rb_parent()
on an entry not in the tree is 'funky' and KASAN complains.
Fixes: 8dafa9d0eb1a ("sched/eevdf: Fix min_deadline heap integrity")
Reported-by: 0599jiangyc@gmail.com
Reported-by: Dmitry Safonov <0x7f454c46@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218020
Link: https://lkml.kernel.org/r/CAJwJo6ZGXO07%3DQvW4fgQfbsDzQPs9xj5sAQ1zp%3DmAyPMNbHYww%40mail.gmail.com
|
|
When employed within a sleepable program not under RCU protection, the
use of 'bpf_task_under_cgroup()' may trigger a warning in the kernel log,
particularly when CONFIG_PROVE_RCU is enabled:
[ 1259.662357] WARNING: suspicious RCU usage
[ 1259.662358] 6.5.0+ #33 Not tainted
[ 1259.662360] -----------------------------
[ 1259.662361] include/linux/cgroup.h:423 suspicious rcu_dereference_check() usage!
Other info that might help to debug this:
[ 1259.662366] rcu_scheduler_active = 2, debug_locks = 1
[ 1259.662368] 1 lock held by trace/72954:
[ 1259.662369] #0: ffffffffb5e3eda0 (rcu_read_lock_trace){....}-{0:0}, at: __bpf_prog_enter_sleepable+0x0/0xb0
Stack backtrace:
[ 1259.662385] CPU: 50 PID: 72954 Comm: trace Kdump: loaded Not tainted 6.5.0+ #33
[ 1259.662391] Call Trace:
[ 1259.662393] <TASK>
[ 1259.662395] dump_stack_lvl+0x6e/0x90
[ 1259.662401] dump_stack+0x10/0x20
[ 1259.662404] lockdep_rcu_suspicious+0x163/0x1b0
[ 1259.662412] task_css_set.part.0+0x23/0x30
[ 1259.662417] bpf_task_under_cgroup+0xe7/0xf0
[ 1259.662422] bpf_prog_7fffba481a3bcf88_lsm_run+0x5c/0x93
[ 1259.662431] bpf_trampoline_6442505574+0x60/0x1000
[ 1259.662439] bpf_lsm_bpf+0x5/0x20
[ 1259.662443] ? security_bpf+0x32/0x50
[ 1259.662452] __sys_bpf+0xe6/0xdd0
[ 1259.662463] __x64_sys_bpf+0x1a/0x30
[ 1259.662467] do_syscall_64+0x38/0x90
[ 1259.662472] entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[ 1259.662479] RIP: 0033:0x7f487baf8e29
[...]
[ 1259.662504] </TASK>
This issue can be reproduced by executing a straightforward program, as
demonstrated below:
SEC("lsm.s/bpf")
int BPF_PROG(lsm_run, int cmd, union bpf_attr *attr, unsigned int size)
{
struct cgroup *cgrp = NULL;
struct task_struct *task;
int ret = 0;
if (cmd != BPF_LINK_CREATE)
return 0;
// The cgroup2 should be mounted first
cgrp = bpf_cgroup_from_id(1);
if (!cgrp)
goto out;
task = bpf_get_current_task_btf();
if (bpf_task_under_cgroup(task, cgrp))
ret = -1;
bpf_cgroup_release(cgrp);
out:
return ret;
}
After running the program, if you subsequently execute another BPF program,
you will encounter the warning.
It's worth noting that task_under_cgroup_hierarchy() is also utilized by
bpf_current_task_under_cgroup(). However, bpf_current_task_under_cgroup()
doesn't exhibit this issue because it cannot be used in sleepable BPF
programs.
Fixes: b5ad4cdc46c7 ("bpf: Add bpf_task_under_cgroup() kfunc")
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Cc: Feng Zhou <zhoufeng.zf@bytedance.com>
Cc: KP Singh <kpsingh@kernel.org>
Link: https://lore.kernel.org/bpf/20231007135945.4306-1-laoar.shao@gmail.com
|
|
A few drivers were missing a xdp_do_flush() invocation after
XDP_REDIRECT.
Add three helper functions each for one of the per-CPU lists. Return
true if the per-CPU list is non-empty and flush the list.
Add xdp_do_check_flushed() which invokes each helper functions and
creates a warning if one of the functions had a non-empty list.
Hide everything behind CONFIG_DEBUG_NET.
Suggested-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20231016125738.Yt79p1uF@linutronix.de
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-10-16
We've added 90 non-merge commits during the last 25 day(s) which contain
a total of 120 files changed, 3519 insertions(+), 895 deletions(-).
The main changes are:
1) Add missed stats for kprobes to retrieve the number of missed kprobe
executions and subsequent executions of BPF programs, from Jiri Olsa.
2) Add cgroup BPF sockaddr hooks for unix sockets. The use case is
for systemd to reimplement the LogNamespace feature which allows
running multiple instances of systemd-journald to process the logs
of different services, from Daan De Meyer.
3) Implement BPF CPUv4 support for s390x BPF JIT, from Ilya Leoshkevich.
4) Improve BPF verifier log output for scalar registers to better
disambiguate their internal state wrt defaults vs min/max values
matching, from Andrii Nakryiko.
5) Extend the BPF fib lookup helpers for IPv4/IPv6 to support retrieving
the source IP address with a new BPF_FIB_LOOKUP_SRC flag,
from Martynas Pumputis.
6) Add support for open-coded task_vma iterator to help with symbolization
for BPF-collected user stacks, from Dave Marchevsky.
7) Add libbpf getters for accessing individual BPF ring buffers which
is useful for polling them individually, for example, from Martin Kelly.
8) Extend AF_XDP selftests to validate the SHARED_UMEM feature,
from Tushar Vyavahare.
9) Improve BPF selftests cross-building support for riscv arch,
from Björn Töpel.
10) Add the ability to pin a BPF timer to the same calling CPU,
from David Vernet.
11) Fix libbpf's bpf_tracing.h macros for riscv to use the generic
implementation of PT_REGS_SYSCALL_REGS() to access syscall arguments,
from Alexandre Ghiti.
12) Extend libbpf to support symbol versioning for uprobes, from Hengqi Chen.
13) Fix bpftool's skeleton code generation to guarantee that ELF data
is 8 byte aligned, from Ian Rogers.
14) Inherit system-wide cpu_mitigations_off() setting for Spectre v1/v4
security mitigations in BPF verifier, from Yafang Shao.
15) Annotate struct bpf_stack_map with __counted_by attribute to prepare
BPF side for upcoming __counted_by compiler support, from Kees Cook.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (90 commits)
bpf: Ensure proper register state printing for cond jumps
bpf: Disambiguate SCALAR register state output in verifier logs
selftests/bpf: Make align selftests more robust
selftests/bpf: Improve missed_kprobe_recursion test robustness
selftests/bpf: Improve percpu_alloc test robustness
selftests/bpf: Add tests for open-coded task_vma iter
bpf: Introduce task_vma open-coded iterator kfuncs
selftests/bpf: Rename bpf_iter_task_vma.c to bpf_iter_task_vmas.c
bpf: Don't explicitly emit BTF for struct btf_iter_num
bpf: Change syscall_nr type to int in struct syscall_tp_t
net/bpf: Avoid unused "sin_addr_len" warning when CONFIG_CGROUP_BPF is not set
bpf: Avoid unnecessary audit log for CPU security mitigations
selftests/bpf: Add tests for cgroup unix socket address hooks
selftests/bpf: Make sure mount directory exists
documentation/bpf: Document cgroup unix socket address hooks
bpftool: Add support for cgroup unix socket address hooks
libbpf: Add support for cgroup unix socket address hooks
bpf: Implement cgroup sockaddr hooks for unix sockets
bpf: Add bpf_sock_addr_set_sun_path() to allow writing unix sockaddr from bpf
bpf: Propagate modified uaddrlen from cgroup sockaddr programs
...
====================
Link: https://lore.kernel.org/r/20231016204803.30153-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The number of active retprobes can be zero but it is not acceptable,
so return EINVAL error if detected.
Link: https://lore.kernel.org/all/169750018550.186853.11198884812017796410.stgit@devnote2/
Reported-by: wuqiang.matt <wuqiang.matt@bytedance.com>
Closes: https://lore.kernel.org/all/20231016222103.cb9f426edc60220eabd8aa6a@kernel.org/
Fixes: 5b0ab78998e3 ("fprobe: Add exit_handler support")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Verifier emits relevant register state involved in any given instruction
next to it after `;` to the right, if possible. Or, worst case, on the
separate line repeating instruction index.
E.g., a nice and simple case would be:
2: (d5) if r0 s<= 0x0 goto pc+1 ; R0_w=0
But if there is some intervening extra output (e.g., precision
backtracking log) involved, we are supposed to see the state after the
precision backtrack log:
4: (75) if r0 s>= 0x0 goto pc+1
mark_precise: frame0: last_idx 4 first_idx 0 subseq_idx -1
mark_precise: frame0: regs=r0 stack= before 2: (d5) if r0 s<= 0x0 goto pc+1
mark_precise: frame0: regs=r0 stack= before 1: (b7) r0 = 0
6: R0_w=0
First off, note that in `6: R0_w=0` instruction index corresponds to the
next instruction, not to the conditional jump instruction itself, which
is wrong and we'll get to that.
But besides that, the above is a happy case that does work today. Yet,
if it so happens that precision backtracking had to traverse some of the
parent states, this `6: R0_w=0` state output would be missing.
This is due to a quirk of print_verifier_state() routine, which performs
mark_verifier_state_clean(env) at the end. This marks all registers as
"non-scratched", which means that subsequent logic to print *relevant*
registers (that is, "scratched ones") fails and doesn't see anything
relevant to print and skips the output altogether.
print_verifier_state() is used both to print instruction context, but
also to print an **entire** verifier state indiscriminately, e.g.,
during precision backtracking (and in a few other situations, like
during entering or exiting subprogram). Which means if we have to print
entire parent state before getting to printing instruction context
state, instruction context is marked as clean and is omitted.
Long story short, this is definitely not intentional. So we fix this
behavior in this patch by teaching print_verifier_state() to clear
scratch state only if it was used to print instruction state, not the
parent/callback state. This is determined by print_all option, so if
it's not set, we don't clear scratch state. This fixes missing
instruction state for these cases.
As for the mismatched instruction index, we fix that by making sure we
call print_insn_state() early inside check_cond_jmp_op() before we
adjusted insn_idx based on jump branch taken logic. And with that we get
desired correct information:
9: (16) if w4 == 0x1 goto pc+9
mark_precise: frame0: last_idx 9 first_idx 9 subseq_idx -1
mark_precise: frame0: parent state regs=r4 stack=: R2_w=1944 R4_rw=P1 R10=fp0
mark_precise: frame0: last_idx 8 first_idx 0 subseq_idx 9
mark_precise: frame0: regs=r4 stack= before 8: (66) if w4 s> 0x3 goto pc+5
mark_precise: frame0: regs=r4 stack= before 7: (b7) r4 = 1
9: R4=1
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20231011223728.3188086-6-andrii@kernel.org
|
|
Currently the way that verifier prints SCALAR_VALUE register state (and
PTR_TO_PACKET, which can have var_off and ranges info as well) is very
ambiguous.
In the name of brevity we are trying to eliminate "unnecessary" output
of umin/umax, smin/smax, u32_min/u32_max, and s32_min/s32_max values, if
possible. Current rules are that if any of those have their default
value (which for mins is the minimal value of its respective types: 0,
S32_MIN, or S64_MIN, while for maxs it's U32_MAX, S32_MAX, S64_MAX, or
U64_MAX) *OR* if there is another min/max value that as matching value.
E.g., if smin=100 and umin=100, we'll emit only umin=10, omitting smin
altogether. This approach has a few problems, being both ambiguous and
sort-of incorrect in some cases.
Ambiguity is due to missing value could be either default value or value
of umin/umax or smin/smax. This is especially confusing when we mix
signed and unsigned ranges. Quite often, umin=0 and smin=0, and so we'll
have only `umin=0` leaving anyone reading verifier log to guess whether
smin is actually 0 or it's actually -9223372036854775808 (S64_MIN). And
often times it's important to know, especially when debugging tricky
issues.
"Sort-of incorrectness" comes from mixing negative and positive values.
E.g., if umin is some large positive number, it can be equal to smin
which is, interpreted as signed value, is actually some negative value.
Currently, that smin will be omitted and only umin will be emitted with
a large positive value, giving an impression that smin is also positive.
Anyway, ambiguity is the biggest issue making it impossible to have an
exact understanding of register state, preventing any sort of automated
testing of verifier state based on verifier log. This patch is
attempting to rectify the situation by removing ambiguity, while
minimizing the verboseness of register state output.
The rules are straightforward:
- if some of the values are missing, then it definitely has a default
value. I.e., `umin=0` means that umin is zero, but smin is actually
S64_MIN;
- all the various boundaries that happen to have the same value are
emitted in one equality separated sequence. E.g., if umin and smin are
both 100, we'll emit `smin=umin=100`, making this explicit;
- we do not mix negative and positive values together, and even if
they happen to have the same bit-level value, they will be emitted
separately with proper sign. I.e., if both umax and smax happen to be
0xffffffffffffffff, we'll emit them both separately as
`smax=-1,umax=18446744073709551615`;
- in the name of a bit more uniformity and consistency,
{u32,s32}_{min,max} are renamed to {s,u}{min,max}32, which seems to
improve readability.
The above means that in case of all 4 ranges being, say, [50, 100] range,
we'd previously see hugely ambiguous:
R1=scalar(umin=50,umax=100)
Now, we'll be more explicit:
R1=scalar(smin=umin=smin32=umin32=50,smax=umax=smax32=umax32=100)
This is slightly more verbose, but distinct from the case when we don't
know anything about signed boundaries and 32-bit boundaries, which under
new rules will match the old case:
R1=scalar(umin=50,umax=100)
Also, in the name of simplicity of implementation and consistency, order
for {s,u}32_{min,max} are emitted *before* var_off. Previously they were
emitted afterwards, for unclear reasons.
This patch also includes a few fixes to selftests that expect exact
register state to accommodate slight changes to verifier format. You can
see that the changes are pretty minimal in common cases.
Note, the special case when SCALAR_VALUE register is a known constant
isn't changed, we'll emit constant value once, interpreted as signed
value.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20231011223728.3188086-5-andrii@kernel.org
|
|
Add the necessary structure to support custom private-data per
posix-clock user.
The previous implementation of posix-clock assumed all file open
instances need access to the same clock structure on private_data.
The need for individual data structures per file open instance has been
identified when developing support for multiple timestamp event queue
users for ptp_clock.
Signed-off-by: Xabier Marquiegui <reibax@gmail.com>
Suggested-by: Richard Cochran <richardcochran@gmail.com>
Suggested-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Two EEVDF fixes"
* tag 'sched-urgent-2023-10-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/eevdf: Fix pick_eevdf()
sched/eevdf: Fix min_deadline heap integrity
|
|
This patch adds kfuncs bpf_iter_task_vma_{new,next,destroy} which allow
creation and manipulation of struct bpf_iter_task_vma in open-coded
iterator style. BPF programs can use these kfuncs directly or through
bpf_for_each macro for natural-looking iteration of all task vmas.
The implementation borrows heavily from bpf_find_vma helper's locking -
differing only in that it holds the mmap_read lock for all iterations
while the helper only executes its provided callback on a maximum of 1
vma. Aside from locking, struct vma_iterator and vma_next do all the
heavy lifting.
A pointer to an inner data struct, struct bpf_iter_task_vma_data, is the
only field in struct bpf_iter_task_vma. This is because the inner data
struct contains a struct vma_iterator (not ptr), whose size is likely to
change under us. If bpf_iter_task_vma_kern contained vma_iterator directly
such a change would require change in opaque bpf_iter_task_vma struct's
size. So better to allocate vma_iterator using BPF allocator, and since
that alloc must already succeed, might as well allocate all iter fields,
thereby freezing struct bpf_iter_task_vma size.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20231013204426.1074286-4-davemarchevsky@fb.com
|
|
Commit 6018e1f407cc ("bpf: implement numbers iterator") added the
BTF_TYPE_EMIT line that this patch is modifying. The struct btf_iter_num
doesn't exist, so only a forward declaration is emitted in BTF:
FWD 'btf_iter_num' fwd_kind=struct
That commit was probably hoping to ensure that struct bpf_iter_num is
emitted in vmlinux BTF. A previous version of this patch changed the
line to emit the correct type, but Yonghong confirmed that it would
definitely be emitted regardless in [0], so this patch simply removes
the line.
This isn't marked "Fixes" because the extraneous btf_iter_num FWD wasn't
causing any issues that I noticed, aside from mild confusion when I
looked through the code.
[0]: https://lore.kernel.org/bpf/25d08207-43e6-36a8-5e0f-47a913d4cda5@linux.dev/
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20231013204426.1074286-2-davemarchevsky@fb.com
|
|
linux-rt-devel tree contains a patch (b1773eac3f29c ("sched: Add support
for lazy preemption")) that adds an extra member to struct trace_entry.
This causes the offset of args field in struct trace_event_raw_sys_enter
be different from the one in struct syscall_trace_enter:
struct trace_event_raw_sys_enter {
struct trace_entry ent; /* 0 12 */
/* XXX last struct has 3 bytes of padding */
/* XXX 4 bytes hole, try to pack */
long int id; /* 16 8 */
long unsigned int args[6]; /* 24 48 */
/* --- cacheline 1 boundary (64 bytes) was 8 bytes ago --- */
char __data[]; /* 72 0 */
/* size: 72, cachelines: 2, members: 4 */
/* sum members: 68, holes: 1, sum holes: 4 */
/* paddings: 1, sum paddings: 3 */
/* last cacheline: 8 bytes */
};
struct syscall_trace_enter {
struct trace_entry ent; /* 0 12 */
/* XXX last struct has 3 bytes of padding */
int nr; /* 12 4 */
long unsigned int args[]; /* 16 0 */
/* size: 16, cachelines: 1, members: 3 */
/* paddings: 1, sum paddings: 3 */
/* last cacheline: 16 bytes */
};
This, in turn, causes perf_event_set_bpf_prog() fail while running bpf
test_profiler testcase because max_ctx_offset is calculated based on the
former struct, while off on the latter:
10488 if (is_tracepoint || is_syscall_tp) {
10489 int off = trace_event_get_offsets(event->tp_event);
10490
10491 if (prog->aux->max_ctx_offset > off)
10492 return -EACCES;
10493 }
What bpf program is actually getting is a pointer to struct
syscall_tp_t, defined in kernel/trace/trace_syscalls.c. This patch fixes
the problem by aligning struct syscall_tp_t with struct
syscall_trace_(enter|exit) and changing the tests to use these structs
to dereference context.
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/bpf/20231013054219.172920-1-asavkov@redhat.com
|
|
An io_uring openat operation can update an audit reference count
from multiple threads resulting in the call trace below.
A call to io_uring_submit() with a single openat op with a flag of
IOSQE_ASYNC results in the following reference count updates.
These first part of the system call performs two increments that do not race.
do_syscall_64()
__do_sys_io_uring_enter()
io_submit_sqes()
io_openat_prep()
__io_openat_prep()
getname()
getname_flags() /* update 1 (increment) */
__audit_getname() /* update 2 (increment) */
The openat op is queued to an io_uring worker thread which starts the
opportunity for a race. The system call exit performs one decrement.
do_syscall_64()
syscall_exit_to_user_mode()
syscall_exit_to_user_mode_prepare()
__audit_syscall_exit()
audit_reset_context()
putname() /* update 3 (decrement) */
The io_uring worker thread performs one increment and two decrements.
These updates can race with the system call decrement.
io_wqe_worker()
io_worker_handle_work()
io_wq_submit_work()
io_issue_sqe()
io_openat()
io_openat2()
do_filp_open()
path_openat()
__audit_inode() /* update 4 (increment) */
putname() /* update 5 (decrement) */
__audit_uring_exit()
audit_reset_context()
putname() /* update 6 (decrement) */
The fix is to change the refcnt member of struct audit_names
from int to atomic_t.
kernel BUG at fs/namei.c:262!
Call Trace:
...
? putname+0x68/0x70
audit_reset_context.part.0.constprop.0+0xe1/0x300
__audit_uring_exit+0xda/0x1c0
io_issue_sqe+0x1f3/0x450
? lock_timer_base+0x3b/0xd0
io_wq_submit_work+0x8d/0x2b0
? __try_to_del_timer_sync+0x67/0xa0
io_worker_handle_work+0x17c/0x2b0
io_wqe_worker+0x10a/0x350
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/lkml/MW2PR2101MB1033FFF044A258F84AEAA584F1C9A@MW2PR2101MB1033.namprd21.prod.outlook.com/
Fixes: 5bd2182d58e9 ("audit,io_uring,io-wq: add some basic audit support to io_uring")
Signed-off-by: Dan Clash <daclash@linux.microsoft.com>
Link: https://lore.kernel.org/r/20231012215518.GA4048@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- In cgroup1, the `tasks` file could have duplicate pids which can
trigger a warning in seq_file. Fix it by removing duplicate items
after sorting
- Comment update
* tag 'cgroup-for-6.6-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Fix incorrect css_set_rwsem reference in comment
cgroup: Remove duplicates in cgroup v1 tasks file
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fixes from Tejun Heo:
- Fix access-after-free in pwq allocation error path
- Implicitly ordered unbound workqueues should lose the implicit
ordering if an attribute change which isn't compatible with ordered
operation is requested. However, attribute changes requested through
the sysfs interface weren't doing that leaving no way to override the
implicit ordering through the sysfs interface. Fix it.
- Other doc and misc updates
* tag 'wq-for-6.6-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: fix -Wformat-truncation in create_worker
workqueue: Override implicit ordered attribute in workqueue_apply_unbound_cpumask()
workqueue: Use the kmem_cache_free() instead of kfree() to release pwq
workqueue: doc: Fix function and sysfs path errors
workqueue: Fix UAF report by KASAN in pwq_release_workfn()
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
kernel/bpf/verifier.c
829955981c55 ("bpf: Fix verifier log for async callback return values")
a923819fb2c5 ("bpf: Treat first argument as return value for bpf_throw")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from CAN and BPF.
We have a regression in TC currently under investigation, otherwise
the things that stand off most are probably the TCP and AF_PACKET
fixes, with both issues coming from 6.5.
Previous releases - regressions:
- af_packet: fix fortified memcpy() without flex array.
- tcp: fix crashes trying to free half-baked MTU probes
- xdp: fix zero-size allocation warning in xskq_create()
- can: sja1000: always restart the tx queue after an overrun
- eth: mlx5e: again mutually exclude RX-FCS and RX-port-timestamp
- eth: nfp: avoid rmmod nfp crash issues
- eth: octeontx2-pf: fix page pool frag allocation warning
Previous releases - always broken:
- mctp: perform route lookups under a RCU read-side lock
- bpf: s390: fix clobbering the caller's backchain in the trampoline
- phy: lynx-28g: cancel the CDR check work item on the remove path
- dsa: qca8k: fix qca8k driver for Turris 1.x
- eth: ravb: fix use-after-free issue in ravb_tx_timeout_work()
- eth: ixgbe: fix crash with empty VF macvlan list"
* tag 'net-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (54 commits)
rswitch: Fix imbalance phy_power_off() calling
rswitch: Fix renesas_eth_sw_remove() implementation
octeontx2-pf: Fix page pool frag allocation warning
nfc: nci: assert requested protocol is valid
af_packet: Fix fortified memcpy() without flex array.
net: tcp: fix crashes trying to free half-baked MTU probes
net/smc: Fix pos miscalculation in statistics
nfp: flower: avoid rmmod nfp crash issues
net: usb: dm9601: fix uninitialized variable use in dm9601_mdio_read
ethtool: Fix mod state of verbose no_mask bitset
net: nfc: fix races in nfc_llcp_sock_get() and nfc_llcp_sock_get_sn()
mctp: perform route lookups under a RCU read-side lock
net: skbuff: fix kernel-doc typos
s390/bpf: Fix unwinding past the trampoline
s390/bpf: Fix clobbering the caller's backchain in the trampoline
net/mlx5e: Again mutually exclude RX-FCS and RX-port-timestamp
net/smc: Fix dependency of SMC on ISM
ixgbe: fix crash with empty VF macvlan list
net/mlx5e: macsec: use update_pn flag instead of PN comparation
net: phy: mscc: macsec: reject PN update requests
...
|
|
Compiling with W=1 emitted the following warning
(Compiler: gcc (x86-64, ver. 13.2.1, .config: result of make allyesconfig,
"Treat warnings as errors" turned off):
kernel/workqueue.c:2188:54: warning: ‘%d’ directive output may be
truncated writing between 1 and 10 bytes into a region of size
between 5 and 14 [-Wformat-truncation=]
kernel/workqueue.c:2188:50: note: directive argument in the range
[0, 2147483647]
kernel/workqueue.c:2188:17: note: ‘snprintf’ output between 4 and 23 bytes
into a destination of size 16
setting "id_buf" to size 23 will silence the warning, since GCC
determines snprintf's output to be max. 23 bytes in line 2188.
Please let me know if there are any mistakes in my patch!
Signed-off-by: Lucy Mielke <lucymielke@icloud.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
workqueue_apply_unbound_cpumask()
Commit 5c0338c68706 ("workqueue: restore WQ_UNBOUND/max_active==1
to be ordered") enabled implicit ordered attribute to be added to
WQ_UNBOUND workqueues with max_active of 1. This prevented the changing
of attributes to these workqueues leading to fix commit 0a94efb5acbb
("workqueue: implicit ordered attribute should be overridable").
However, workqueue_apply_unbound_cpumask() was not updated at that time.
So sysfs changes to wq_unbound_cpumask has no effect on WQ_UNBOUND
workqueues with implicit ordered attribute. Since not all WQ_UNBOUND
workqueues are visible on sysfs, we are not able to make all the
necessary cpumask changes even if we iterates all the workqueue cpumasks
in sysfs and changing them one by one.
Fix this problem by applying the corresponding change made
to apply_workqueue_attrs_locked() in the fix commit to
workqueue_apply_unbound_cpumask().
Fixes: 5c0338c68706 ("workqueue: restore WQ_UNBOUND/max_active==1 to be ordered")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Currently, the kfree() be used for pwq objects allocated with
kmem_cache_alloc() in alloc_and_link_pwqs(), this isn't wrong.
but usually, use "trace_kmem_cache_alloc/trace_kmem_cache_free"
to track memory allocation and free. this commit therefore use
kmem_cache_free() instead of kfree() in alloc_and_link_pwqs()
and also consistent with release of the pwq in rcu_free_pwq().
Signed-off-by: Zqiang <qiang.zhang1211@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|