summaryrefslogtreecommitdiff
path: root/lib/Kconfig.kasan
AgeCommit message (Collapse)AuthorFilesLines
2020-10-14KASAN: port KASAN Tests to KUnitPatricia Alfonso1-5/+17
Transfer all previous tests for KASAN to KUnit so they can be run more easily. Using kunit_tool, developers can run these tests with their other KUnit tests and see "pass" or "fail" with the appropriate KASAN report instead of needing to parse each KASAN report to test KASAN functionalities. All KASAN reports are still printed to dmesg. Stack tests do not work properly when KASAN_STACK is enabled so those tests use a check for "if IS_ENABLED(CONFIG_KASAN_STACK)" so they only run if stack instrumentation is enabled. If KASAN_STACK is not enabled, KUnit will print a statement to let the user know this test was not run with KASAN_STACK enabled. copy_user_test and kasan_rcu_uaf cannot be run in KUnit so there is a separate test file for those tests, which can be run as before as a module. [trishalfonso@google.com: v14] Link: https://lkml.kernel.org/r/20200915035828.570483-4-davidgow@google.com Signed-off-by: Patricia Alfonso <trishalfonso@google.com> Signed-off-by: David Gow <davidgow@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Reviewed-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Shuah Khan <shuah@kernel.org> Cc: Vincent Guittot <vincent.guittot@linaro.org> Link: https://lkml.kernel.org/r/20200910070331.3358048-4-davidgow@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-14kasan: remove mentions of unsupported Clang versionsMarco Elver1-5/+4
Since the kernel now requires at least Clang 10.0.1, remove any mention of old Clang versions and simplify the documentation. Signed-off-by: Marco Elver <elver@google.com> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Cc: Fangrui Song <maskray@google.com> Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Cc: Sedat Dilek <sedat.dilek@gmail.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lkml.kernel.org/r/20200902225911.209899-7-ndesaulniers@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-07kasan: update required compiler versions in documentationMarco Elver1-9/+15
Updates the recently changed compiler requirements for KASAN. In particular, we require GCC >= 8.3.0, and add a note that Clang 11 supports OOB detection of globals. Fixes: 7b861a53e46b ("kasan: Bump required compiler version") Fixes: acf7b0bf7dcf ("kasan: Fix required compiler version") Signed-off-by: Marco Elver <elver@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Andrey Konovalov <andreyknvl@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Walter Wu <walter-zh.wu@mediatek.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Daniel Axtens <dja@axtens.net> Link: http://lkml.kernel.org/r/20200629104157.3242503-2-elver@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-07kasan: improve and simplify Kconfig.kasanMarco Elver1-7/+8
Turn 'KASAN' into a menuconfig, to avoid cluttering its parent menu with the suboptions if enabled. Use 'if KASAN ... endif' instead of having to 'depend on KASAN' for each entry. Signed-off-by: Marco Elver <elver@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Andrey Konovalov <andreyknvl@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Daniel Axtens <dja@axtens.net> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Walter Wu <walter-zh.wu@mediatek.com> Link: http://lkml.kernel.org/r/20200629104157.3242503-1-elver@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-25kasan: Fix required compiler versionMarco Elver1-1/+1
The first working GCC version to satisfy CC_HAS_WORKING_NOSANITIZE_ADDRESS is GCC 8.3.0. Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=89124 Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Marco Elver <elver@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20200623112448.GA208112@elver.google.com
2020-06-15kasan: Bump required compiler versionMarco Elver1-0/+4
Adds config variable CC_HAS_WORKING_NOSANITIZE_ADDRESS, which will be true if we have a compiler that does not fail builds due to no_sanitize_address functions. This does not yet mean they work as intended, but for automated build-tests, this is the minimum requirement. For example, we require that __always_inline functions used from no_sanitize_address functions do not generate instrumentation. On GCC <= 7 this fails to build entirely, therefore we make the minimum version GCC 8. Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Marco Elver <elver@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Acked-by: Andrey Konovalov <andreyknvl@google.com> Link: https://lkml.kernel.org/r/20200602175859.GC2604@hirez.programming.kicks-ass.net
2019-12-01kasan: support backing vmalloc space with real shadow memoryDaniel Axtens1-0/+16
Patch series "kasan: support backing vmalloc space with real shadow memory", v11. Currently, vmalloc space is backed by the early shadow page. This means that kasan is incompatible with VMAP_STACK. This series provides a mechanism to back vmalloc space with real, dynamically allocated memory. I have only wired up x86, because that's the only currently supported arch I can work with easily, but it's very easy to wire up other architectures, and it appears that there is some work-in-progress code to do this on arm64 and s390. This has been discussed before in the context of VMAP_STACK: - https://bugzilla.kernel.org/show_bug.cgi?id=202009 - https://lkml.org/lkml/2018/7/22/198 - https://lkml.org/lkml/2019/7/19/822 In terms of implementation details: Most mappings in vmalloc space are small, requiring less than a full page of shadow space. Allocating a full shadow page per mapping would therefore be wasteful. Furthermore, to ensure that different mappings use different shadow pages, mappings would have to be aligned to KASAN_SHADOW_SCALE_SIZE * PAGE_SIZE. Instead, share backing space across multiple mappings. Allocate a backing page when a mapping in vmalloc space uses a particular page of the shadow region. This page can be shared by other vmalloc mappings later on. We hook in to the vmap infrastructure to lazily clean up unused shadow memory. Testing with test_vmalloc.sh on an x86 VM with 2 vCPUs shows that: - Turning on KASAN, inline instrumentation, without vmalloc, introuduces a 4.1x-4.2x slowdown in vmalloc operations. - Turning this on introduces the following slowdowns over KASAN: * ~1.76x slower single-threaded (test_vmalloc.sh performance) * ~2.18x slower when both cpus are performing operations simultaneously (test_vmalloc.sh sequential_test_order=1) This is unfortunate but given that this is a debug feature only, not the end of the world. The benchmarks are also a stress-test for the vmalloc subsystem: they're not indicative of an overall 2x slowdown! This patch (of 4): Hook into vmalloc and vmap, and dynamically allocate real shadow memory to back the mappings. Most mappings in vmalloc space are small, requiring less than a full page of shadow space. Allocating a full shadow page per mapping would therefore be wasteful. Furthermore, to ensure that different mappings use different shadow pages, mappings would have to be aligned to KASAN_SHADOW_SCALE_SIZE * PAGE_SIZE. Instead, share backing space across multiple mappings. Allocate a backing page when a mapping in vmalloc space uses a particular page of the shadow region. This page can be shared by other vmalloc mappings later on. We hook in to the vmap infrastructure to lazily clean up unused shadow memory. To avoid the difficulties around swapping mappings around, this code expects that the part of the shadow region that covers the vmalloc space will not be covered by the early shadow page, but will be left unmapped. This will require changes in arch-specific code. This allows KASAN with VMAP_STACK, and may be helpful for architectures that do not have a separate module space (e.g. powerpc64, which I am currently working on). It also allows relaxing the module alignment back to PAGE_SIZE. Testing with test_vmalloc.sh on an x86 VM with 2 vCPUs shows that: - Turning on KASAN, inline instrumentation, without vmalloc, introuduces a 4.1x-4.2x slowdown in vmalloc operations. - Turning this on introduces the following slowdowns over KASAN: * ~1.76x slower single-threaded (test_vmalloc.sh performance) * ~2.18x slower when both cpus are performing operations simultaneously (test_vmalloc.sh sequential_test_order=3D1) This is unfortunate but given that this is a debug feature only, not the end of the world. The full benchmark results are: Performance No KASAN KASAN original x baseline KASAN vmalloc x baseline x KASAN fix_size_alloc_test 662004 11404956 17.23 19144610 28.92 1.68 full_fit_alloc_test 710950 12029752 16.92 13184651 18.55 1.10 long_busy_list_alloc_test 9431875 43990172 4.66 82970178 8.80 1.89 random_size_alloc_test 5033626 23061762 4.58 47158834 9.37 2.04 fix_align_alloc_test 1252514 15276910 12.20 31266116 24.96 2.05 random_size_align_alloc_te 1648501 14578321 8.84 25560052 15.51 1.75 align_shift_alloc_test 147 830 5.65 5692 38.72 6.86 pcpu_alloc_test 80732 125520 1.55 140864 1.74 1.12 Total Cycles 119240774314 763211341128 6.40 1390338696894 11.66 1.82 Sequential, 2 cpus No KASAN KASAN original x baseline KASAN vmalloc x baseline x KASAN fix_size_alloc_test 1423150 14276550 10.03 27733022 19.49 1.94 full_fit_alloc_test 1754219 14722640 8.39 15030786 8.57 1.02 long_busy_list_alloc_test 11451858 52154973 4.55 107016027 9.34 2.05 random_size_alloc_test 5989020 26735276 4.46 68885923 11.50 2.58 fix_align_alloc_test 2050976 20166900 9.83 50491675 24.62 2.50 random_size_align_alloc_te 2858229 17971700 6.29 38730225 13.55 2.16 align_shift_alloc_test 405 6428 15.87 26253 64.82 4.08 pcpu_alloc_test 127183 151464 1.19 216263 1.70 1.43 Total Cycles 54181269392 308723699764 5.70 650772566394 12.01 2.11 fix_size_alloc_test 1420404 14289308 10.06 27790035 19.56 1.94 full_fit_alloc_test 1736145 14806234 8.53 15274301 8.80 1.03 long_busy_list_alloc_test 11404638 52270785 4.58 107550254 9.43 2.06 random_size_alloc_test 6017006 26650625 4.43 68696127 11.42 2.58 fix_align_alloc_test 2045504 20280985 9.91 50414862 24.65 2.49 random_size_align_alloc_te 2845338 17931018 6.30 38510276 13.53 2.15 align_shift_alloc_test 472 3760 7.97 9656 20.46 2.57 pcpu_alloc_test 118643 132732 1.12 146504 1.23 1.10 Total Cycles 54040011688 309102805492 5.72 651325675652 12.05 2.11 [dja@axtens.net: fixups] Link: http://lkml.kernel.org/r/20191120052719.7201-1-dja@axtens.net Link: https://bugzilla.kernel.org/show_bug.cgi?id=3D202009 Link: http://lkml.kernel.org/r/20191031093909.9228-2-dja@axtens.net Signed-off-by: Mark Rutland <mark.rutland@arm.com> [shadow rework] Signed-off-by: Daniel Axtens <dja@axtens.net> Co-developed-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Vasily Gorbik <gor@linux.ibm.com> Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Qian Cai <cai@lca.pw> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-25kasan: add memory corruption identification for software tag-based modeWalter Wu1-0/+8
Add memory corruption identification at bug report for software tag-based mode. The report shows whether it is "use-after-free" or "out-of-bound" error instead of "invalid-access" error. This will make it easier for programmers to see the memory corruption problem. We extend the slab to store five old free pointer tag and free backtrace, we can check if the tagged address is in the slab record and make a good guess if the object is more like "use-after-free" or "out-of-bound". therefore every slab memory corruption can be identified whether it's "use-after-free" or "out-of-bound". [aryabinin@virtuozzo.com: simplify & clenup code] Link: https://lkml.kernel.org/r/3318f9d7-a760-3cc8-b700-f06108ae745f@virtuozzo.com] Link: http://lkml.kernel.org/r/20190821180332.11450-1-aryabinin@virtuozzo.com Signed-off-by: Walter Wu <walter-zh.wu@mediatek.com> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Acked-by: Andrey Konovalov <andreyknvl@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-08-03kasan: remove clang version check for KASAN_STACKArnd Bergmann1-6/+5
asan-stack mode still uses dangerously large kernel stacks of tens of kilobytes in some drivers, and it does not seem that anyone is working on the clang bug. Turn it off for all clang versions to prevent users from accidentally enabling it once they update to clang-9, and to help automated build testing with clang-9. Link: https://bugs.llvm.org/show_bug.cgi?id=38809 Link: http://lkml.kernel.org/r/20190719200347.2596375-1-arnd@arndb.de Fixes: 6baec880d7a5 ("kasan: turn off asan-stack for clang-8 and earlier") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Mark Brown <broonie@kernel.org> Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Qian Cai <cai@lca.pw> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-06kasan: remove use after scope bugs detection.Andrey Ryabinin1-10/+0
Use after scope bugs detector seems to be almost entirely useless for the linux kernel. It exists over two years, but I've seen only one valid bug so far [1]. And the bug was fixed before it has been reported. There were some other use-after-scope reports, but they were false-positives due to different reasons like incompatibility with structleak plugin. This feature significantly increases stack usage, especially with GCC < 9 version, and causes a 32K stack overflow. It probably adds performance penalty too. Given all that, let's remove use-after-scope detector entirely. While preparing this patch I've noticed that we mistakenly enable use-after-scope detection for clang compiler regardless of CONFIG_KASAN_EXTRA setting. This is also fixed now. [1] http://lkml.kernel.org/r/<20171129052106.rhgbjhhis53hkgfn@wfg-t540p.sh.intel.com> Link: http://lkml.kernel.org/r/20190111185842.13978-1-aryabinin@virtuozzo.com Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Acked-by: Will Deacon <will.deacon@arm.com> [arm64] Cc: Qian Cai <cai@lca.pw> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-01kasan: turn off asan-stack for clang-8 and earlierArnd Bergmann1-0/+22
Building an arm64 allmodconfig kernel with clang results in over 140 warnings about overly large stack frames, the worst ones being: drivers/gpu/drm/panel/panel-sitronix-st7789v.c:196:12: error: stack frame size of 20224 bytes in function 'st7789v_prepare' drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td028ttec1.c:196:12: error: stack frame size of 13120 bytes in function 'td028ttec1_panel_enable' drivers/usb/host/max3421-hcd.c:1395:1: error: stack frame size of 10048 bytes in function 'max3421_spi_thread' drivers/net/wan/slic_ds26522.c:209:12: error: stack frame size of 9664 bytes in function 'slic_ds26522_probe' drivers/crypto/ccp/ccp-ops.c:2434:5: error: stack frame size of 8832 bytes in function 'ccp_run_cmd' drivers/media/dvb-frontends/stv0367.c:1005:12: error: stack frame size of 7840 bytes in function 'stv0367ter_algo' None of these happen with gcc today, and almost all of these are the result of a single known issue in llvm. Hopefully it will eventually get fixed with the clang-9 release. In the meantime, the best idea I have is to turn off asan-stack for clang-8 and earlier, so we can produce a kernel that is safe to run. I have posted three patches that address the frame overflow warnings that are not addressed by turning off asan-stack, so in combination with this change, we get much closer to a clean allmodconfig build, which in turn is necessary to do meaningful build regression testing. It is still possible to turn on the CONFIG_ASAN_STACK option on all versions of clang, and it's always enabled for gcc, but when CONFIG_COMPILE_TEST is set, the option remains invisible, so allmodconfig and randconfig builds (which are normally done with a forced CONFIG_COMPILE_TEST) will still result in a mostly clean build. Link: http://lkml.kernel.org/r/20190222222950.3997333-1-arnd@arndb.de Link: https://bugs.llvm.org/show_bug.cgi?id=38809 Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Qian Cai <cai@lca.pw> Reviewed-by: Mark Brown <broonie@kernel.org> Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Kostya Serebryany <kcc@google.com> Cc: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28kasan: add CONFIG_KASAN_GENERIC and CONFIG_KASAN_SW_TAGSAndrey Konovalov1-22/+76
This commit splits the current CONFIG_KASAN config option into two: 1. CONFIG_KASAN_GENERIC, that enables the generic KASAN mode (the one that exists now); 2. CONFIG_KASAN_SW_TAGS, that enables the software tag-based KASAN mode. The name CONFIG_KASAN_SW_TAGS is chosen as in the future we will have another hardware tag-based KASAN mode, that will rely on hardware memory tagging support in arm64. With CONFIG_KASAN_SW_TAGS enabled, compiler options are changed to instrument kernel files with -fsantize=kernel-hwaddress (except the ones for which KASAN_SANITIZE := n is set). Both CONFIG_KASAN_GENERIC and CONFIG_KASAN_SW_TAGS support both CONFIG_KASAN_INLINE and CONFIG_KASAN_OUTLINE instrumentation modes. This commit also adds empty placeholder (for now) implementation of tag-based KASAN specific hooks inserted by the compiler and adjusts common hooks implementation. While this commit adds the CONFIG_KASAN_SW_TAGS config option, this option is not selectable, as it depends on HAVE_ARCH_KASAN_SW_TAGS, which we will enable once all the infrastracture code has been added. Link: http://lkml.kernel.org/r/b2550106eb8a68b10fefbabce820910b115aa853.1544099024.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-09s390/kasan: add option for 4-level paging supportVasily Gorbik1-0/+9
By default 3-level paging is used when the kernel is compiled with kasan support. Add 4-level paging option to support systems with more then 3TB of physical memory and to cover 4-level paging specific code with kasan as well. Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-07-27kasan: only select SLUB_DEBUG with SYSFS=yArnd Bergmann1-1/+1
Building with KASAN and SLUB but without sysfs now results in a build-time error: WARNING: unmet direct dependencies detected for SLUB_DEBUG Depends on [n]: SLUB [=y] && SYSFS [=n] Selected by [y]: - KASAN [=y] && HAVE_ARCH_KASAN [=y] && (SLUB [=y] || SLAB [=n] && !DEBUG_SLAB [=n]) && SLUB [=y] mm/slub.c:4565:12: error: 'list_locations' defined but not used [-Werror=unused-function] static int list_locations(struct kmem_cache *s, char *buf, ^~~~~~~~~~~~~~ mm/slub.c:4406:13: error: 'validate_slab_cache' defined but not used [-Werror=unused-function] static long validate_slab_cache(struct kmem_cache *s) This disallows that broken configuration in Kconfig. Link: http://lkml.kernel.org/r/20180709154019.1693026-1-arnd@arndb.de Fixes: dd275caf4a0d ("kasan: depend on CONFIG_SLUB_DEBUG") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: "Jason A. Donenfeld" <Jason@zx2c4.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Shakeel Butt <shakeelb@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Christoph Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-28kasan: depend on CONFIG_SLUB_DEBUGJason A. Donenfeld1-0/+1
KASAN depends on having access to some of the accounting that SLUB_DEBUG does; without it, there are immediate crashes [1]. So, the natural thing to do is to make KASAN select SLUB_DEBUG. [1] http://lkml.kernel.org/r/CAHmME9rtoPwxUSnktxzKso14iuVCWT7BE_-_8PAC=pGw1iJnQg@mail.gmail.com Link: http://lkml.kernel.org/r/20180622154623.25388-1-Jason@zx2c4.com Fixes: f9e13c0a5a33 ("slab, slub: skip unnecessary kasan_cache_shutdown()") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Christoph Lameter <cl@linux.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: David Rientjes <rientjes@google.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-07kasan: rework Kconfig settingsArnd Bergmann1-0/+11
We get a lot of very large stack frames using gcc-7.0.1 with the default -fsanitize-address-use-after-scope --param asan-stack=1 options, which can easily cause an overflow of the kernel stack, e.g. drivers/gpu/drm/i915/gvt/handlers.c:2434:1: warning: the frame size of 46176 bytes is larger than 3072 bytes drivers/net/wireless/ralink/rt2x00/rt2800lib.c:5650:1: warning: the frame size of 23632 bytes is larger than 3072 bytes lib/atomic64_test.c:250:1: warning: the frame size of 11200 bytes is larger than 3072 bytes drivers/gpu/drm/i915/gvt/handlers.c:2621:1: warning: the frame size of 9208 bytes is larger than 3072 bytes drivers/media/dvb-frontends/stv090x.c:3431:1: warning: the frame size of 6816 bytes is larger than 3072 bytes fs/fscache/stats.c:287:1: warning: the frame size of 6536 bytes is larger than 3072 bytes To reduce this risk, -fsanitize-address-use-after-scope is now split out into a separate CONFIG_KASAN_EXTRA Kconfig option, leading to stack frames that are smaller than 2 kilobytes most of the time on x86_64. An earlier version of this patch also prevented combining KASAN_EXTRA with KASAN_INLINE, but that is no longer necessary with gcc-7.0.1. All patches to get the frame size below 2048 bytes with CONFIG_KASAN=y and CONFIG_KASAN_EXTRA=n have been merged by maintainers now, so we can bring back that default now. KASAN_EXTRA=y still causes lots of warnings but now defaults to !COMPILE_TEST to disable it in allmodconfig, and it remains disabled in all other defconfigs since it is a new option. I arbitrarily raise the warning limit for KASAN_EXTRA to 3072 to reduce the noise, but an allmodconfig kernel still has around 50 warnings on gcc-7. I experimented a bit more with smaller stack frames and have another follow-up series that reduces the warning limit for 64-bit architectures to 1280 bytes (without CONFIG_KASAN). With earlier versions of this patch series, I also had patches to address the warnings we get with KASAN and/or KASAN_EXTRA, using a "noinline_if_stackbloat" annotation. That annotation now got replaced with a gcc-8 bugfix (see https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81715) and a workaround for older compilers, which means that KASAN_EXTRA is now just as bad as before and will lead to an instant stack overflow in a few extreme cases. This reverts parts of commit 3f181b4d8652 ("lib/Kconfig.debug: disable -Wframe-larger-than warnings with KASAN=y"). Two patches in linux-next should be merged first to avoid introducing warnings in an allmodconfig build: 3cd890dbe2a4 ("media: dvb-frontends: fix i2c access helpers for KASAN") 16c3ada89cff ("media: r820t: fix r820t_write_reg for KASAN") Do we really need to backport this? I think we do: without this patch, enabling KASAN will lead to unavoidable kernel stack overflow in certain device drivers when built with gcc-7 or higher on linux-4.10+ or any version that contains a backport of commit c5caf21ab0cf8. Most people are probably still on older compilers, but it will get worse over time as they upgrade their distros. The warnings we get on kernels older than this should all be for code that uses dangerously large stack frames, though most of them do not cause an actual stack overflow by themselves.The asan-stack option was added in linux-4.0, and commit 3f181b4d8652 ("lib/Kconfig.debug: disable -Wframe-larger-than warnings with KASAN=y") effectively turned off the warning for allmodconfig kernels, so I would like to see this fix backported to any kernels later than 4.0. I have done dozens of fixes for individual functions with stack frames larger than 2048 bytes with asan-stack, and I plan to make sure that all those fixes make it into the stable kernels as well (most are already there). Part of the complication here is that asan-stack (from 4.0) was originally assumed to always require much larger stacks, but that turned out to be a combination of multiple gcc bugs that we have now worked around and fixed, but sanitize-address-use-after-scope (from v4.10) has a much higher inherent stack usage and also suffers from at least three other problems that we have analyzed but not yet fixed upstream, each of them makes the stack usage more severe than it should be. Link: http://lkml.kernel.org/r/20171221134744.2295529-1-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29mm, kasan: switch SLUB to stackdepot, enable memory quarantine for SLUBAlexander Potapenko1-2/+2
For KASAN builds: - switch SLUB allocator to using stackdepot instead of storing the allocation/deallocation stacks in the objects; - change the freelist hook so that parts of the freelist can be put into the quarantine. [aryabinin@virtuozzo.com: fixes] Link: http://lkml.kernel.org/r/1468601423-28676-1-git-send-email-aryabinin@virtuozzo.com Link: http://lkml.kernel.org/r/1468347165-41906-3-git-send-email-glider@google.com Signed-off-by: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Steven Rostedt (Red Hat) <rostedt@goodmis.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kostya Serebryany <kcc@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Kuthonuzo Luruo <kuthonuzo.luruo@hpe.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26mm, kasan: stackdepot implementation. Enable stackdepot for SLABAlexander Potapenko1-0/+1
Implement the stack depot and provide CONFIG_STACKDEPOT. Stack depot will allow KASAN store allocation/deallocation stack traces for memory chunks. The stack traces are stored in a hash table and referenced by handles which reside in the kasan_alloc_meta and kasan_free_meta structures in the allocated memory chunks. IRQ stack traces are cut below the IRQ entry point to avoid unnecessary duplication. Right now stackdepot support is only enabled in SLAB allocator. Once KASAN features in SLAB are on par with those in SLUB we can switch SLUB to stackdepot as well, thus removing the dependency on SLUB stack bookkeeping, which wastes a lot of memory. This patch is based on the "mm: kasan: stack depots" patch originally prepared by Dmitry Chernenkov. Joonsoo has said that he plans to reuse the stackdepot code for the mm/page_owner.c debugging facility. [akpm@linux-foundation.org: s/depot_stack_handle/depot_stack_handle_t] [aryabinin@virtuozzo.com: comment style fixes] Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26mm, kasan: SLAB supportAlexander Potapenko1-1/+3
Add KASAN hooks to SLAB allocator. This patch is based on the "mm: kasan: unified support for SLUB and SLAB allocators" patch originally prepared by Dmitry Chernenkov. Signed-off-by: Alexander Potapenko <glider@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06mm, slub, kasan: enable user tracking by default with KASAN=yAndrey Ryabinin1-2/+1
It's recommended to have slub's user tracking enabled with CONFIG_KASAN, because: a) User tracking disables slab merging which improves detecting out-of-bounds accesses. b) User tracking metadata acts as redzone which also improves detecting out-of-bounds accesses. c) User tracking provides additional information about object. This information helps to understand bugs. Currently it is not enabled by default. Besides recompiling the kernel with KASAN and reinstalling it, user also have to change the boot cmdline, which is not very handy. Enable slub user tracking by default with KASAN=y, since there is no good reason to not do this. [akpm@linux-foundation.org: little fixes, per David] Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-06x86/kasan: Move KASAN_SHADOW_OFFSET to the arch KconfigAndrey Ryabinin1-4/+0
KASAN_SHADOW_OFFSET is purely arch specific setting, so it should be in arch's Kconfig file. Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com> Cc: Alexander Popov <alpopov@ptsecurity.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Bolle <pebolle@tiscali.nl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1435828178-10975-7-git-send-email-a.ryabinin@samsung.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-06kasan: show gcc version requirements in Kconfig and DocumentationJoe Perches1-2/+6
The documentation shows a need for gcc > 4.9.2, but it's really >=. The Kconfig entries don't show require versions so add them. Correct a latter/later typo too. Also mention that gcc 5 required to catch out of bounds accesses to global and stack variables. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-14kasan: enable instrumentation of global variablesAndrey Ryabinin1-0/+1
This feature let us to detect accesses out of bounds of global variables. This will work as for globals in kernel image, so for globals in modules. Currently this won't work for symbols in user-specified sections (e.g. __init, __read_mostly, ...) The idea of this is simple. Compiler increases each global variable by redzone size and add constructors invoking __asan_register_globals() function. Information about global variable (address, size, size with redzone ...) passed to __asan_register_globals() so we could poison variable's redzone. This patch also forces module_alloc() to return 8*PAGE_SIZE aligned address making shadow memory handling ( kasan_module_alloc()/kasan_module_free() ) more simple. Such alignment guarantees that each shadow page backing modules address space correspond to only one module_alloc() allocation. Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrey Konovalov <adech.fo@gmail.com> Cc: Yuri Gribov <tetra2005@gmail.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Christoph Lameter <cl@linux.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-14lib: add kasan test moduleAndrey Ryabinin1-0/+8
This is a test module doing various nasty things like out of bounds accesses, use after free. It is useful for testing kernel debugging features like kernel address sanitizer. It mostly concentrates on testing of slab allocator, but we might want to add more different stuff here in future (like stack/global variables out of bounds accesses and so on). Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrey Konovalov <adech.fo@gmail.com> Cc: Yuri Gribov <tetra2005@gmail.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Christoph Lameter <cl@linux.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-14mm: slub: add kernel address sanitizer support for slub allocatorAndrey Ryabinin1-0/+1
With this patch kasan will be able to catch bugs in memory allocated by slub. Initially all objects in newly allocated slab page, marked as redzone. Later, when allocation of slub object happens, requested by caller number of bytes marked as accessible, and the rest of the object (including slub's metadata) marked as redzone (inaccessible). We also mark object as accessible if ksize was called for this object. There is some places in kernel where ksize function is called to inquire size of really allocated area. Such callers could validly access whole allocated memory, so it should be marked as accessible. Code in slub.c and slab_common.c files could validly access to object's metadata, so instrumentation for this files are disabled. Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com> Signed-off-by: Dmitry Chernenkov <dmitryc@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Konstantin Serebryany <kcc@google.com> Signed-off-by: Andrey Konovalov <adech.fo@gmail.com> Cc: Yuri Gribov <tetra2005@gmail.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Christoph Lameter <cl@linux.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-14x86_64: add KASan supportAndrey Ryabinin1-0/+1
This patch adds arch specific code for kernel address sanitizer. 16TB of virtual addressed used for shadow memory. It's located in range [ffffec0000000000 - fffffc0000000000] between vmemmap and %esp fixup stacks. At early stage we map whole shadow region with zero page. Latter, after pages mapped to direct mapping address range we unmap zero pages from corresponding shadow (see kasan_map_shadow()) and allocate and map a real shadow memory reusing vmemmap_populate() function. Also replace __pa with __pa_nodebug before shadow initialized. __pa with CONFIG_DEBUG_VIRTUAL=y make external function call (__phys_addr) __phys_addr is instrumented, so __asan_load could be called before shadow area initialized. Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrey Konovalov <adech.fo@gmail.com> Cc: Yuri Gribov <tetra2005@gmail.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Christoph Lameter <cl@linux.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Jim Davis <jim.epost@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-14kasan: add kernel address sanitizer infrastructureAndrey Ryabinin1-0/+43
Kernel Address sanitizer (KASan) is a dynamic memory error detector. It provides fast and comprehensive solution for finding use-after-free and out-of-bounds bugs. KASAN uses compile-time instrumentation for checking every memory access, therefore GCC > v4.9.2 required. v4.9.2 almost works, but has issues with putting symbol aliases into the wrong section, which breaks kasan instrumentation of globals. This patch only adds infrastructure for kernel address sanitizer. It's not available for use yet. The idea and some code was borrowed from [1]. Basic idea: The main idea of KASAN is to use shadow memory to record whether each byte of memory is safe to access or not, and use compiler's instrumentation to check the shadow memory on each memory access. Address sanitizer uses 1/8 of the memory addressable in kernel for shadow memory and uses direct mapping with a scale and offset to translate a memory address to its corresponding shadow address. Here is function to translate address to corresponding shadow address: unsigned long kasan_mem_to_shadow(unsigned long addr) { return (addr >> KASAN_SHADOW_SCALE_SHIFT) + KASAN_SHADOW_OFFSET; } where KASAN_SHADOW_SCALE_SHIFT = 3. So for every 8 bytes there is one corresponding byte of shadow memory. The following encoding used for each shadow byte: 0 means that all 8 bytes of the corresponding memory region are valid for access; k (1 <= k <= 7) means that the first k bytes are valid for access, and other (8 - k) bytes are not; Any negative value indicates that the entire 8-bytes are inaccessible. Different negative values used to distinguish between different kinds of inaccessible memory (redzones, freed memory) (see mm/kasan/kasan.h). To be able to detect accesses to bad memory we need a special compiler. Such compiler inserts a specific function calls (__asan_load*(addr), __asan_store*(addr)) before each memory access of size 1, 2, 4, 8 or 16. These functions check whether memory region is valid to access or not by checking corresponding shadow memory. If access is not valid an error printed. Historical background of the address sanitizer from Dmitry Vyukov: "We've developed the set of tools, AddressSanitizer (Asan), ThreadSanitizer and MemorySanitizer, for user space. We actively use them for testing inside of Google (continuous testing, fuzzing, running prod services). To date the tools have found more than 10'000 scary bugs in Chromium, Google internal codebase and various open-source projects (Firefox, OpenSSL, gcc, clang, ffmpeg, MySQL and lots of others): [2] [3] [4]. The tools are part of both gcc and clang compilers. We have not yet done massive testing under the Kernel AddressSanitizer (it's kind of chicken and egg problem, you need it to be upstream to start applying it extensively). To date it has found about 50 bugs. Bugs that we've found in upstream kernel are listed in [5]. We've also found ~20 bugs in out internal version of the kernel. Also people from Samsung and Oracle have found some. [...] As others noted, the main feature of AddressSanitizer is its performance due to inline compiler instrumentation and simple linear shadow memory. User-space Asan has ~2x slowdown on computational programs and ~2x memory consumption increase. Taking into account that kernel usually consumes only small fraction of CPU and memory when running real user-space programs, I would expect that kernel Asan will have ~10-30% slowdown and similar memory consumption increase (when we finish all tuning). I agree that Asan can well replace kmemcheck. We have plans to start working on Kernel MemorySanitizer that finds uses of unitialized memory. Asan+Msan will provide feature-parity with kmemcheck. As others noted, Asan will unlikely replace debug slab and pagealloc that can be enabled at runtime. Asan uses compiler instrumentation, so even if it is disabled, it still incurs visible overheads. Asan technology is easily portable to other architectures. Compiler instrumentation is fully portable. Runtime has some arch-dependent parts like shadow mapping and atomic operation interception. They are relatively easy to port." Comparison with other debugging features: ======================================== KMEMCHECK: - KASan can do almost everything that kmemcheck can. KASan uses compile-time instrumentation, which makes it significantly faster than kmemcheck. The only advantage of kmemcheck over KASan is detection of uninitialized memory reads. Some brief performance testing showed that kasan could be x500-x600 times faster than kmemcheck: $ netperf -l 30 MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to localhost (127.0.0.1) port 0 AF_INET Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec no debug: 87380 16384 16384 30.00 41624.72 kasan inline: 87380 16384 16384 30.00 12870.54 kasan outline: 87380 16384 16384 30.00 10586.39 kmemcheck: 87380 16384 16384 30.03 20.23 - Also kmemcheck couldn't work on several CPUs. It always sets number of CPUs to 1. KASan doesn't have such limitation. DEBUG_PAGEALLOC: - KASan is slower than DEBUG_PAGEALLOC, but KASan works on sub-page granularity level, so it able to find more bugs. SLUB_DEBUG (poisoning, redzones): - SLUB_DEBUG has lower overhead than KASan. - SLUB_DEBUG in most cases are not able to detect bad reads, KASan able to detect both reads and writes. - In some cases (e.g. redzone overwritten) SLUB_DEBUG detect bugs only on allocation/freeing of object. KASan catch bugs right before it will happen, so we always know exact place of first bad read/write. [1] https://code.google.com/p/address-sanitizer/wiki/AddressSanitizerForKernel [2] https://code.google.com/p/address-sanitizer/wiki/FoundBugs [3] https://code.google.com/p/thread-sanitizer/wiki/FoundBugs [4] https://code.google.com/p/memory-sanitizer/wiki/FoundBugs [5] https://code.google.com/p/address-sanitizer/wiki/AddressSanitizerForKernel#Trophies Based on work by Andrey Konovalov. Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com> Acked-by: Michal Marek <mmarek@suse.cz> Signed-off-by: Andrey Konovalov <adech.fo@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Cc: Yuri Gribov <tetra2005@gmail.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Christoph Lameter <cl@linux.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>