summaryrefslogtreecommitdiff
path: root/lib/plist.c
AgeCommit message (Collapse)AuthorFilesLines
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar1-0/+1
<linux/sched/clock.h> We are going to split <linux/sched/clock.h> out of <linux/sched.h>, which will have to be picked up from other headers and .c files. Create a trivial placeholder <linux/sched/clock.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-13lib/plist.c: remove redundant includeRasmus Villemoes1-1/+0
Removing the include of linux/spinlock.h produces byte-identical output for {allno,def}config, and identical objdump -d output for allyesconfig. In the former two cases, more than a 100 lines are eliminated from the generated dependency file. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-05lib/plist.c: replace pr_debug with printk in plist_test()Dan Streetman1-2/+2
Replace pr_debug() in lib/plist.c test function plist_test() with printk(KERN_DEBUG ...). Without DEBUG defined, pr_debug() is complied out, but the entire plist_test() function is already inside CONFIG_DEBUG_PI_LIST, so printk should just be used directly. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Reviewed-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-05lib/plist: add plist_requeueDan Streetman1-0/+52
Add plist_requeue(), which moves the specified plist_node after all other same-priority plist_nodes in the list. This is essentially an optimized plist_del() followed by plist_add(). This is needed by swap, which (with the next patch in this set) uses a plist of available swap devices. When a swap device (either a swap partition or swap file) are added to the system with swapon(), the device is added to a plist, ordered by the swap device's priority. When swap needs to allocate a page from one of the swap devices, it takes the page from the first swap device on the plist, which is the highest priority swap device. The swap device is left in the plist until all its pages are used, and then removed from the plist when it becomes full. However, as described in man 2 swapon, swap must allocate pages from swap devices with the same priority in round-robin order; to do this, on each swap page allocation, swap uses a page from the first swap device in the plist, and then calls plist_requeue() to move that swap device entry to after any other same-priority swap devices. The next swap page allocation will again use a page from the first swap device in the plist and requeue it, and so on, resulting in round-robin usage of equal-priority swap devices. Also add plist_test_requeue() test function, for use by plist_test() to test plist_requeue() function. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Shaohua Li <shli@fusionio.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Cc: Weijie Yang <weijieut@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Bob Liu <bob.liu@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-05lib/plist.c: make plist test announcements KERN_DEBUGBorislav Petkov1-2/+2
They show up in dmesg [ 4.041094] start plist test [ 4.045804] end plist test without a lot of meaning so hide them behind debug loglevel. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-01bug.h: add include of it to various implicit C usersPaul Gortmaker1-0/+1
With bug.h currently living right in linux/kernel.h there are files that use BUG_ON and friends but are not including the header explicitly. Fix them up so we can remove the presence in kernel.h file. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-07-08plist: Remove the need to supply locks to plist headsDima Zavin1-6/+1
This was legacy code brought over from the RT tree and is no longer necessary. Signed-off-by: Dima Zavin <dima@android.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Daniel Walker <dwalker@codeaurora.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Link: http://lkml.kernel.org/r/1310084879-10351-2-git-send-email-dima@android.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-03-11plist: Add priority list testLai Jiangshan1-1/+80
Add test code for checking plist when the kernel is booting. Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> LKML-Reference: <4D107986.1010302@cn.fujitsu.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-03-11plist: Shrink struct plist_headLai Jiangshan1-19/+35
struct plist_head is used in struct task_struct as well as struct rtmutex. If we can make it smaller, it will also make these structures smaller as well. The field prio_list in struct plist_head is seldom used and we can get its information from the plist_nodes. Removing this field will decrease the size of plist_head by half. Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> LKML-Reference: <4D107982.9090700@cn.fujitsu.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-12-15plist: Make plist debugging raw_spinlock awareThomas Gleixner1-3/+5
plists are used with spinlocks and raw_spinlocks. Change the plist debugging to handle both types. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Ingo Molnar <mingo@elte.hu>
2008-07-26Use WARN() in lib/Arjan van de Ven1-6/+7
Use WARN() instead of a printk+WARN_ON() pair; this way the message becomes part of the warning section for better reporting/collection. In addition, one of the if() clauses collapes into the WARN() entirely now. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2006-06-28[PATCH] pi-futex: add plist implementationIngo Molnar1-0/+118
Add the priority-sorted list (plist) implementation. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>