summaryrefslogtreecommitdiff
path: root/lib
AgeCommit message (Collapse)AuthorFilesLines
2023-03-06cpumask: re-introduce constant-sized cpumask optimizationsLinus Torvalds1-13/+1
Commit aa47a7c215e7 ("lib/cpumask: deprecate nr_cpumask_bits") resulted in the cpumask operations potentially becoming hugely less efficient, because suddenly the cpumask was always considered to be variable-sized. The optimization was then later added back in a limited form by commit 6f9c07be9d02 ("lib/cpumask: add FORCE_NR_CPUS config option"), but that FORCE_NR_CPUS option is not useful in a generic kernel and more of a special case for embedded situations with fixed hardware. Instead, just re-introduce the optimization, with some changes. Instead of depending on CPUMASK_OFFSTACK being false, and then always using the full constant cpumask width, this introduces three different cpumask "sizes": - the exact size (nr_cpumask_bits) remains identical to nr_cpu_ids. This is used for situations where we should use the exact size. - the "small" size (small_cpumask_bits) is the NR_CPUS constant if it fits in a single word and the bitmap operations thus end up able to trigger the "small_const_nbits()" optimizations. This is used for the operations that have optimized single-word cases that get inlined, notably the bit find and scanning functions. - the "large" size (large_cpumask_bits) is the NR_CPUS constant if it is an sufficiently small constant that makes simple "copy" and "clear" operations more efficient. This is arbitrarily set at four words or less. As a an example of this situation, without this fixed size optimization, cpumask_clear() will generate code like movl nr_cpu_ids(%rip), %edx addq $63, %rdx shrq $3, %rdx andl $-8, %edx callq memset@PLT on x86-64, because it would calculate the "exact" number of longwords that need to be cleared. In contrast, with this patch, using a MAX_CPU of 64 (which is quite a reasonable value to use), the above becomes a single movq $0,cpumask instruction instead, because instead of caring to figure out exactly how many CPU's the system has, it just knows that the cpumask will be a single word and can just clear it all. Note that this does end up tightening the rules a bit from the original version in another way: operations that set bits in the cpumask are now limited to the actual nr_cpu_ids limit, whereas we used to do the nr_cpumask_bits thing almost everywhere in the cpumask code. But if you just clear bits, or scan for bits, we can use the simpler compile-time constants. In the process, remove 'cpumask_complement()' and 'for_each_cpu_not()' which were not useful, and which fundamentally have to be limited to 'nr_cpu_ids'. Better remove them now than have somebody introduce use of them later. Of course, on x86-64 with MAXSMP there is no sane small compile-time constant for the cpumask sizes, and we end up using the actual CPU bits, and will generate the above kind of horrors regardless. Please don't use MAXSMP unless you really expect to have machines with thousands of cores. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-03-05Merge tag 'mm-hotfixes-stable-2023-03-04-13-12' of ↵Linus Torvalds3-8/+19
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "17 hotfixes. Eight are for MM and seven are for other parts of the kernel. Seven are cc:stable and eight address post-6.3 issues or were judged unsuitable for -stable backporting" * tag 'mm-hotfixes-stable-2023-03-04-13-12' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mailmap: map Dikshita Agarwal's old address to his current one mailmap: map Vikash Garodia's old address to his current one fs/cramfs/inode.c: initialize file_ra_state fs: hfsplus: fix UAF issue in hfsplus_put_super panic: fix the panic_print NMI backtrace setting lib: parser: update documentation for match_NUMBER functions kasan, x86: don't rename memintrinsics in uninstrumented files kasan: test: fix test for new meminstrinsic instrumentation kasan: treat meminstrinsic as builtins in uninstrumented files kasan: emit different calls for instrumentable memintrinsics ocfs2: fix non-auto defrag path not working issue ocfs2: fix defrag path triggering jbd2 ASSERT mailmap: map Georgi Djakov's old Linaro address to his current one mm/hwpoison: convert TTU_IGNORE_HWPOISON to TTU_HWPOISON lib/zlib: DFLTCC deflate does not write all available bits for Z_NO_FLUSH mm/damon/paddr: fix missing folio_put() mm/mremap: fix dup_anon_vma() in vma_merge() case 4
2023-03-03lib: parser: update documentation for match_NUMBER functionsEric Biggers1-7/+7
commit 67222c4ba8af ("lib: parser: optimize match_NUMBER apis to use local array") removed -ENOMEM as a possible return value, so update the comments accordingly. Link: https://lkml.kernel.org/r/20230224042618.9092-1-ebiggers@kernel.org Fixes: 67222c4ba8af ("lib: parser: optimize match_NUMBER apis to use local array") Signed-off-by: Eric Biggers <ebiggers@google.com> Cc: Li Lingfeng <lilingfeng3@huawei.com> Cc: Tejun Heo <tj@kernel.org> Cc: Yu Kuai <yukuai1@huaweicloud.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-03-03kasan: treat meminstrinsic as builtins in uninstrumented filesMarco Elver1-0/+9
Where the compiler instruments meminstrinsics by generating calls to __asan/__hwasan_ prefixed functions, let the compiler consider memintrinsics as builtin again. To do so, never override memset/memmove/memcpy if the compiler does the correct instrumentation - even on !GENERIC_ENTRY architectures. [elver@google.com: powerpc: don't rename memintrinsics if compiler adds prefixes] Link: https://lore.kernel.org/all/20230224085942.1791837-1-elver@google.com/ [1] Link: https://lkml.kernel.org/r/20230227094726.3833247-1-elver@google.com Link: https://lkml.kernel.org/r/20230224085942.1791837-2-elver@google.com Fixes: 69d4c0d32186 ("entry, kasan, x86: Disallow overriding mem*() functions") Signed-off-by: Marco Elver <elver@google.com> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jakub Jelinek <jakub@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Nicolas Schier <nicolas@fjasle.eu> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-28lib/zlib: DFLTCC deflate does not write all available bits for Z_NO_FLUSHMikhail Zaslonko1-1/+3
DFLTCC deflate with Z_NO_FLUSH might generate a corrupted stream when the output buffer is not large enough to fit all the deflate output at once. The problem takes place on closing the deflate block since flush_pending() might leave some output bits not written. Similar problem for software deflate with Z_BLOCK flush option (not supported by kernel zlib deflate) has been fixed a while ago in userspace zlib but the fix never got to the kernel. Now flush_pending() flushes the bit buffer before copying out the byte buffer, in order to really flush as much as possible. Currently there are no users of DFLTCC deflate with Z_NO_FLUSH option in the kernel so the problem remained hidden for a while. This commit is based on the old zlib commit: https://github.com/madler/zlib/commit/0b828b4 Link: https://lkml.kernel.org/r/20230221131617.3369978-2-zaslonko@linux.ibm.com Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com> Acked-by: Ilya Leoshkevich <iii@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-28kunit: Fix 'hooks.o' build by recursing into kunitDavid Gow2-9/+5
KUnit's 'hooks.o' file need to be built-in whenever KUnit is enabled (even if CONFIG_KUNIT=m). We'd previously attemtped to do this by adding 'kunit/hooks.o' to obj-y in lib/Makefile, but this caused hooks.c to be rebuilt even when it was unchanged. Instead, always recurse into lib/kunit using obj-y when KUnit is enabled, and add the hooks there. Fixes: 7170b7ed6acb ("kunit: Add "hooks" to call into KUnit when it's built as a module"). Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/linux-kselftest/CAHk-=wiEf7irTKwPJ0jTMOF3CS-13UXmF6Fns3wuWpOZ_wGyZQ@mail.gmail.com/ Signed-off-by: David Gow <davidgow@google.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-02-26Merge tag 'kcsan.2023.02.24a' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull kernel concurrency sanitizer (KCSAN) updates from Paul McKenney: "This fixes gcc-11 errors for x86_64 KCSAN-enabled kernel builds by selecting the CONSTRUCTORS Kconfig option" * tag 'kcsan.2023.02.24a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: kcsan: select CONFIG_CONSTRUCTORS
2023-02-25Merge tag 'cxl-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxlLinus Torvalds1-3/+3
Pull Compute Express Link (CXL) updates from Dan Williams: "To date Linux has been dependent on platform-firmware to map CXL RAM regions and handle events / errors from devices. With this update we can now parse / update the CXL memory layout, and report events / errors from devices. This is a precursor for the CXL subsystem to handle the end-to-end "RAS" flow for CXL memory. i.e. the flow that for DDR-attached-DRAM is handled by the EDAC driver where it maps system physical address events to a field-replaceable-unit (FRU / endpoint device). In general, CXL has the potential to standardize what has historically been a pile of memory-controller-specific error handling logic. Another change of note is the default policy for handling RAM-backed device-dax instances. Previously the default access mode was "device", mmap(2) a device special file to access memory. The new default is "kmem" where the address range is assigned to the core-mm via add_memory_driver_managed(). This saves typical users from wondering why their platform memory is not visible via free(1) and stuck behind a device-file. At the same time it allows expert users to deploy policy to, for example, get dedicated access to high performance memory, or hide low performance memory from general purpose kernel allocations. This affects not only CXL, but also systems with high-bandwidth-memory that platform-firmware tags with the EFI_MEMORY_SP (special purpose) designation. Summary: - CXL RAM region enumeration: instantiate 'struct cxl_region' objects for platform firmware created memory regions - CXL RAM region provisioning: complement the existing PMEM region creation support with RAM region support - "Soft Reservation" policy change: Online (memory hot-add) soft-reserved memory (EFI_MEMORY_SP) by default, but still allow for setting aside such memory for dedicated access via device-dax. - CXL Events and Interrupts: Takeover CXL event handling from platform-firmware (ACPI calls this CXL Memory Error Reporting) and export CXL Events via Linux Trace Events. - Convey CXL _OSC results to drivers: Similar to PCI, let the CXL subsystem interrogate the result of CXL _OSC negotiation. - Emulate CXL DVSEC Range Registers as "decoders": Allow for first-generation devices that pre-date the definition of the CXL HDM Decoder Capability to translate the CXL DVSEC Range Registers into 'struct cxl_decoder' objects. - Set timestamp: Per spec, set the device timestamp in case of hotplug, or if platform-firwmare failed to set it. - General fixups: linux-next build issues, non-urgent fixes for pre-production hardware, unit test fixes, spelling and debug message improvements" * tag 'cxl-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (66 commits) dax/kmem: Fix leak of memory-hotplug resources cxl/mem: Add kdoc param for event log driver state cxl/trace: Add serial number to trace points cxl/trace: Add host output to trace points cxl/trace: Standardize device information output cxl/pci: Remove locked check for dvsec_range_allowed() cxl/hdm: Add emulation when HDM decoders are not committed cxl/hdm: Create emulated cxl_hdm for devices that do not have HDM decoders cxl/hdm: Emulate HDM decoder from DVSEC range registers cxl/pci: Refactor cxl_hdm_decode_init() cxl/port: Export cxl_dvsec_rr_decode() to cxl_port cxl/pci: Break out range register decoding from cxl_hdm_decode_init() cxl: add RAS status unmasking for CXL cxl: remove unnecessary calling of pci_enable_pcie_error_reporting() dax/hmem: build hmem device support as module if possible dax: cxl: add CXL_REGION dependency cxl: avoid returning uninitialized error code cxl/pmem: Fix nvdimm registration races cxl/mem: Fix UAPI command comment cxl/uapi: Tag commands from cxl_query_cmd() ...
2023-02-24Merge tag 'driver-core-6.3-rc1' of ↵Linus Torvalds2-6/+15
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the large set of driver core changes for 6.3-rc1. There's a lot of changes this development cycle, most of the work falls into two different categories: - fw_devlink fixes and updates. This has gone through numerous review cycles and lots of review and testing by lots of different devices. Hopefully all should be good now, and Saravana will be keeping a watch for any potential regression on odd embedded systems. - driver core changes to work to make struct bus_type able to be moved into read-only memory (i.e. const) The recent work with Rust has pointed out a number of areas in the driver core where we are passing around and working with structures that really do not have to be dynamic at all, and they should be able to be read-only making things safer overall. This is the contuation of that work (started last release with kobject changes) in moving struct bus_type to be constant. We didn't quite make it for this release, but the remaining patches will be finished up for the release after this one, but the groundwork has been laid for this effort. Other than that we have in here: - debugfs memory leak fixes in some subsystems - error path cleanups and fixes for some never-able-to-be-hit codepaths. - cacheinfo rework and fixes - Other tiny fixes, full details are in the shortlog All of these have been in linux-next for a while with no reported problems" [ Geert Uytterhoeven points out that that last sentence isn't true, and that there's a pending report that has a fix that is queued up - Linus ] * tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (124 commits) debugfs: drop inline constant formatting for ERR_PTR(-ERROR) OPP: fix error checking in opp_migrate_dentry() debugfs: update comment of debugfs_rename() i3c: fix device.h kernel-doc warnings dma-mapping: no need to pass a bus_type into get_arch_dma_ops() driver core: class: move EXPORT_SYMBOL_GPL() lines to the correct place Revert "driver core: add error handling for devtmpfs_create_node()" Revert "devtmpfs: add debug info to handle()" Revert "devtmpfs: remove return value of devtmpfs_delete_node()" driver core: cpu: don't hand-override the uevent bus_type callback. devtmpfs: remove return value of devtmpfs_delete_node() devtmpfs: add debug info to handle() driver core: add error handling for devtmpfs_create_node() driver core: bus: update my copyright notice driver core: bus: add bus_get_dev_root() function driver core: bus: constify bus_unregister() driver core: bus: constify some internal functions driver core: bus: constify bus_get_kset() driver core: bus: constify bus_register/unregister_notifier() driver core: remove private pointer from struct bus_type ...
2023-02-24Merge tag 'mm-nonmm-stable-2023-02-20-15-29' of ↵Linus Torvalds17-138/+1130
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: "There is no particular theme here - mainly quick hits all over the tree. Most notable is a set of zlib changes from Mikhail Zaslonko which enhances and fixes zlib's use of S390 hardware support: 'lib/zlib: Set of s390 DFLTCC related patches for kernel zlib'" * tag 'mm-nonmm-stable-2023-02-20-15-29' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (55 commits) Update CREDITS file entry for Jesper Juhl sparc: allow PM configs for sparc32 COMPILE_TEST hung_task: print message when hung_task_warnings gets down to zero. arch/Kconfig: fix indentation scripts/tags.sh: fix the Kconfig tags generation when using latest ctags nilfs2: prevent WARNING in nilfs_dat_commit_end() lib/zlib: remove redundation assignement of avail_in dfltcc_gdht() lib/Kconfig.debug: do not enable DEBUG_PREEMPT by default lib/zlib: DFLTCC always switch to software inflate for Z_PACKET_FLUSH option lib/zlib: DFLTCC support inflate with small window lib/zlib: Split deflate and inflate states for DFLTCC lib/zlib: DFLTCC not writing header bits when avail_out == 0 lib/zlib: fix DFLTCC ignoring flush modes when avail_in == 0 lib/zlib: fix DFLTCC not flushing EOBS when creating raw streams lib/zlib: implement switching between DFLTCC and software lib/zlib: adjust offset calculation for dfltcc_state nilfs2: replace WARN_ONs for invalid DAT metadata block requests scripts/spelling.txt: add "exsits" pattern and fix typo instances fs: gracefully handle ->get_block not mapping bh in __mpage_writepage cramfs: Kconfig: fix spelling & punctuation ...
2023-02-24Merge tag 'mm-stable-2023-02-20-13-37' of ↵Linus Torvalds6-473/+492
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - Daniel Verkamp has contributed a memfd series ("mm/memfd: add F_SEAL_EXEC") which permits the setting of the memfd execute bit at memfd creation time, with the option of sealing the state of the X bit. - Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset() thread-safe for pmd unshare") which addresses a rare race condition related to PMD unsharing. - Several folioification patch serieses from Matthew Wilcox, Vishal Moola, Sidhartha Kumar and Lorenzo Stoakes - Johannes Weiner has a series ("mm: push down lock_page_memcg()") which does perform some memcg maintenance and cleanup work. - SeongJae Park has added DAMOS filtering to DAMON, with the series "mm/damon/core: implement damos filter". These filters provide users with finer-grained control over DAMOS's actions. SeongJae has also done some DAMON cleanup work. - Kairui Song adds a series ("Clean up and fixes for swap"). - Vernon Yang contributed the series "Clean up and refinement for maple tree". - Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It adds to MGLRU an LRU of memcgs, to improve the scalability of global reclaim. - David Hildenbrand has added some userfaultfd cleanup work in the series "mm: uffd-wp + change_protection() cleanups". - Christoph Hellwig has removed the generic_writepages() library function in the series "remove generic_writepages". - Baolin Wang has performed some maintenance on the compaction code in his series "Some small improvements for compaction". - Sidhartha Kumar is doing some maintenance work on struct page in his series "Get rid of tail page fields". - David Hildenbrand contributed some cleanup, bugfixing and generalization of pte management and of pte debugging in his series "mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with swap PTEs". - Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation flag in the series "Discard __GFP_ATOMIC". - Sergey Senozhatsky has improved zsmalloc's memory utilization with his series "zsmalloc: make zspage chain size configurable". - Joey Gouly has added prctl() support for prohibiting the creation of writeable+executable mappings. The previous BPF-based approach had shortcomings. See "mm: In-kernel support for memory-deny-write-execute (MDWE)". - Waiman Long did some kmemleak cleanup and bugfixing in the series "mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF". - T.J. Alumbaugh has contributed some MGLRU cleanup work in his series "mm: multi-gen LRU: improve". - Jiaqi Yan has provided some enhancements to our memory error statistics reporting, mainly by presenting the statistics on a per-node basis. See the series "Introduce per NUMA node memory error statistics". - Mel Gorman has a second and hopefully final shot at fixing a CPU-hog regression in compaction via his series "Fix excessive CPU usage during compaction". - Christoph Hellwig does some vmalloc maintenance work in the series "cleanup vfree and vunmap". - Christoph Hellwig has removed block_device_operations.rw_page() in ths series "remove ->rw_page". - We get some maple_tree improvements and cleanups in Liam Howlett's series "VMA tree type safety and remove __vma_adjust()". - Suren Baghdasaryan has done some work on the maintainability of our vm_flags handling in the series "introduce vm_flags modifier functions". - Some pagemap cleanup and generalization work in Mike Rapoport's series "mm, arch: add generic implementation of pfn_valid() for FLATMEM" and "fixups for generic implementation of pfn_valid()" - Baoquan He has done some work to make /proc/vmallocinfo and /proc/kcore better represent the real state of things in his series "mm/vmalloc.c: allow vread() to read out vm_map_ram areas". - Jason Gunthorpe rationalized the GUP system's interface to the rest of the kernel in the series "Simplify the external interface for GUP". - SeongJae Park wishes to migrate people from DAMON's debugfs interface over to its sysfs interface. To support this, we'll temporarily be printing warnings when people use the debugfs interface. See the series "mm/damon: deprecate DAMON debugfs interface". - Andrey Konovalov provided the accurately named "lib/stackdepot: fixes and clean-ups" series. - Huang Ying has provided a dramatic reduction in migration's TLB flush IPI rates with the series "migrate_pages(): batch TLB flushing". - Arnd Bergmann has some objtool fixups in "objtool warning fixes". * tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (505 commits) include/linux/migrate.h: remove unneeded externs mm/memory_hotplug: cleanup return value handing in do_migrate_range() mm/uffd: fix comment in handling pte markers mm: change to return bool for isolate_movable_page() mm: hugetlb: change to return bool for isolate_hugetlb() mm: change to return bool for isolate_lru_page() mm: change to return bool for folio_isolate_lru() objtool: add UACCESS exceptions for __tsan_volatile_read/write kmsan: disable ftrace in kmsan core code kasan: mark addr_has_metadata __always_inline mm: memcontrol: rename memcg_kmem_enabled() sh: initialize max_mapnr m68k/nommu: add missing definition of ARCH_PFN_OFFSET mm: percpu: fix incorrect size in pcpu_obj_full_size() maple_tree: reduce stack usage with gcc-9 and earlier mm: page_alloc: call panic() when memoryless node allocation fails mm: multi-gen LRU: avoid futile retries migrate_pages: move THP/hugetlb migration support check to simplify code migrate_pages: batch flushing TLB migrate_pages: share more code between _unmap and _move ...
2023-02-24Merge tag 'modules-6.3-rc1' of ↵Linus Torvalds1-6/+5
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux Pull modules updates from Luis Chamberlain: "Nothing exciting at all for modules for v6.3. The biggest change is just the change of INSTALL_MOD_DIR from "extra" to "updates" which I found lingered for ages for no good reason while testing the CXL mock driver [0]. The CXL mock driver has no kconfig integration and requires building an external module... and re-building the *rest* of the production drivers. This mock driver when loaded but not the production ones will crash. All this can obviously be fixed by integrating kconfig semantics into such test module, however that's not desirable by the maintainer, and so sensible defaults must be used to ensure a default "make modules_install" will suffice for most distros which do not have a file like /etc/depmod.d/dist.conf with something like `search updates extra built-in`. Since most distros rely on kmod and since its inception the "updates" directory is always in the search path it makes more sense to use that than the "extra" which only *some* RH based systems rely on. All this stuff has been on linux-next for a while" [0] https://lkml.kernel.org/r/20221209062919.1096779-1-mcgrof@kernel.org * tag 'modules-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: Documentation: livepatch: module-elf-format: Remove local klp_modinfo definition module.h: Document klp_modinfo struct using kdoc module: Use kstrtobool() instead of strtobool() kernel/params.c: Use kstrtobool() instead of strtobool() test_kmod: stop kernel-doc warnings kbuild: Modify default INSTALL_MOD_DIR from extra to updates
2023-02-24Merge tag 'printk-for-6.3' of ↵Linus Torvalds1-8/+14
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk updates from Petr Mladek: - Refactor printk code for formatting messages that are shown on consoles. This is a preparatory step for introducing atomic consoles which could not share the global buffers - Prevent memory leak when removing printk index in debugfs - Dump also the newest printk message by the sample gdbmacro - Fix a compiler warning * tag 'printk-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: printf: fix errname.c list kernel/printk/index.c: fix memory leak with using debugfs_lookup() printk: Use scnprintf() to print the message about the dropped messages on a console printk: adjust string limit macros printk: use printk_buffers for devkmsg printk: introduce console_prepend_dropped() for dropped messages printk: introduce printk_get_next_message() and printk_message printk: introduce struct printk_buffers console: Document struct console console: Use BIT() macros for @flags values printk: move size limit macros into internal.h docs: gdbmacros: print newest record
2023-02-24Merge tag 'probes-v6.3' of ↵Linus Torvalds1-2/+37
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull kprobes updates from Masami Hiramatsu: - Skip negative return code check for snprintf in eprobe - Add recursive call test cases for kprobe unit test - Add 'char' type to probe events to show it as the character instead of value - Update kselftest kprobe-event testcase to ignore '__pfx_' symbols - Fix kselftest to check filter on eprobe event correctly - Add filter on eprobe to the README file in tracefs - Fix optprobes to check whether there is 'under unoptimizing' optprobe when optimizing another kprobe correctly - Fix optprobe to check whether there is 'under unoptimizing' optprobe when fetching the original instruction correctly - Fix optprobe to free 'forcibly unoptimized' optprobe correctly * tag 'probes-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing/eprobe: no need to check for negative ret value for snprintf test_kprobes: Add recursed kprobe test case tracing/probe: add a char type to show the character value of traced arguments selftests/ftrace: Fix probepoint testcase to ignore __pfx_* symbols selftests/ftrace: Fix eprobe syntax test case to check filter support tracing/eprobe: Fix to add filter on eprobe description in README file x86/kprobes: Fix arch_check_optimized_kprobe check within optimized_kprobe range x86/kprobes: Fix __recover_optprobed_insn check optimizing logic kprobes: Fix to handle forcibly unoptimized kprobes on freeing_list
2023-02-23Merge tag 'linux-kselftest-kunit-6.3-rc1' of ↵Linus Torvalds9-8/+563
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull KUnit update from Shuah Khan: - add Function Redirection API to isolate the code being tested from other parts of the kernel. Documentation/dev-tools/kunit/api/functionredirection.rst has the details. * tag 'linux-kselftest-kunit-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit: Add printf attribute to fail_current_test_impl lib/hashtable_test.c: add test for the hashtable structure Documentation: Add Function Redirection API docs kunit: Expose 'static stub' API to redirect functions kunit: Add "hooks" to call into KUnit when it's built as a module kunit: kunit.py extract handlers tools/testing/kunit/kunit.py: remove redundant double check
2023-02-23Merge tag 'nmi.2023.02.14a' of ↵Linus Torvalds2-0/+13
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull x86 NMI diagnostics from Paul McKenney: "Add diagnostics to the x86 NMI handler to help detect NMI-handler bugs on the one hand and failing hardware on the other" * tag 'nmi.2023.02.14a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: x86/nmi: Print reasons why backtrace NMIs are ignored x86/nmi: Accumulate NMI-progress evidence in exc_nmi()
2023-02-23Merge tag '6.3-rc-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds1-12/+272
Pull cifs client updates from Steve French: "The largest subset of this is from David Howells et al: making the cifs/smb3 driver pass iov_iters down to the lowest layers, directly to the network transport rather than passing lists of pages around, helping multiple areas: - Pin user pages, thereby fixing the race between concurrent DIO read and fork, where the pages containing the DIO read buffer may end up belonging to the child process and not the parent - with the result that the parent might not see the retrieved data. - cifs shouldn't take refs on pages extracted from non-user-backed iterators (eg. KVEC). With these changes, cifs will apply the appropriate cleanup. - Making it easier to transition to using folios in cifs rather than pages by dealing with them through BVEC and XARRAY iterators. - Allowing cifs to use the new splice function The remainder are: - fixes for stable, including various fixes for uninitialized memory, wrong length field causing mount issue to very old servers, important directory lease fixes and reconnect fixes - cleanups (unused code removal, change one element array usage, and a change form strtobool to kstrtobool, and Kconfig cleanups) - SMBDIRECT (RDMA) fixes including iov_iter integration and UAF fixes - reconnect fixes - multichannel fixes, including improving channel allocation (to least used channel) - remove the last use of lock_page_killable by moving to folio_lock_killable" * tag '6.3-rc-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: (46 commits) update internal module version number for cifs.ko cifs: update ip_addr for ses only for primary chan setup cifs: use tcon allocation functions even for dummy tcon cifs: use the least loaded channel for sending requests cifs: DIO to/from KVEC-type iterators should now work cifs: Remove unused code cifs: Build the RDMA SGE list directly from an iterator cifs: Change the I/O paths to use an iterator rather than a page list cifs: Add a function to read into an iter from a socket cifs: Add some helper functions cifs: Add a function to Hash the contents of an iterator cifs: Add a function to build an RDMA SGE list from an iterator netfs: Add a function to extract an iterator into a scatterlist netfs: Add a function to extract a UBUF or IOVEC into a BVEC iterator cifs: Implement splice_read to pass down ITER_BVEC not ITER_PIPE splice: Export filemap/direct_splice_read() iov_iter: Add a function to extract a page list from an iterator iov_iter: Define flags to qualify page extraction. splice: Add a func to do a splice from an O_DIRECT file without ITER_PIPE splice: Add a func to do a splice from a buffered file without ITER_PIPE ...
2023-02-22Merge tag 'docs-6.3' of git://git.lwn.net/linuxLinus Torvalds1-2/+0
Pull documentation updates from Jonathan Corbet: "It has been a moderately calm cycle for documentation; the significant changes include: - Some significant additions to the memory-management documentation - Some improvements to navigation in the HTML-rendered docs - More Spanish and Chinese translations ... and the usual set of typo fixes and such" * tag 'docs-6.3' of git://git.lwn.net/linux: (68 commits) Documentation/watchdog/hpwdt: Fix Format Documentation/watchdog/hpwdt: Fix Reference Documentation: core-api: padata: correct spelling docs/mm: Physical Memory: correct spelling in reference to CONFIG_PAGE_EXTENSION docs: Use HTML comments for the kernel-toc SPDX line docs: Add more information to the HTML sidebar Documentation: KVM: Update AMD memory encryption link printk: Document that CONFIG_BOOT_PRINTK_DELAY required for boot_delay= Documentation: userspace-api: correct spelling Documentation: sparc: correct spelling Documentation: driver-api: correct spelling Documentation: admin-guide: correct spelling docs: add workload-tracing document to admin-guide docs/admin-guide/mm: remove useless markup docs/mm: remove useless markup docs/mm: Physical Memory: remove useless markup docs/sp_SP: Add process magic-number translation docs: ftrace: always use canonical ftrace path Doc/damon: fix the data path error dma-buf: Add "dma-buf" to title of documentation ...
2023-02-22kcsan: select CONFIG_CONSTRUCTORSArnd Bergmann1-0/+1
Building a kcsan enabled kernel for x86_64 with gcc-11 results in a lot of build warnings or errors without CONFIG_CONSTRUCTORS: x86_64-linux-ld: error: unplaced orphan section `.ctors.65436' from `arch/x86/lib/copy_mc.o' x86_64-linux-ld: error: unplaced orphan section `.ctors.65436' from `arch/x86/lib/cpu.o' x86_64-linux-ld: error: unplaced orphan section `.ctors.65436' from `arch/x86/lib/csum-partial_64.o' x86_64-linux-ld: error: unplaced orphan section `.ctors.65436' from `arch/x86/lib/csum-wrappers_64.o' x86_64-linux-ld: error: unplaced orphan section `.ctors.65436' from `arch/x86/lib/insn-eval.o' x86_64-linux-ld: error: unplaced orphan section `.ctors.65436' from `arch/x86/lib/insn.o' x86_64-linux-ld: error: unplaced orphan section `.ctors.65436' from `arch/x86/lib/misc.o' The same thing has been reported for mips64. I can't reproduce it for any other compiler version, so I don't know if constructors are always required here or if this is a gcc-11 specific implementation detail. I see no harm in always enabling constructors here, and this reliably fixes the build warnings for me. Link: https://lore.kernel.org/lkml/202204181801.r3MMkwJv-lkp@intel.com/T/ Cc: Kees Cook <keescook@chromium.org> See-also: 3e6631485fae ("vmlinux.lds.h: Keep .ctors.* with .ctors") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Marco Elver <elver@google.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2023-02-22Merge tag 'net-next-6.3' of ↵Linus Torvalds3-23/+47
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ...
2023-02-22Merge tag 'v6.3-p1' of ↵Linus Torvalds2-4/+24
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto update from Herbert Xu: "API: - Use kmap_local instead of kmap_atomic - Change request callback to take void pointer - Print FIPS status in /proc/crypto (when enabled) Algorithms: - Add rfc4106/gcm support on arm64 - Add ARIA AVX2/512 support on x86 Drivers: - Add TRNG driver for StarFive SoC - Delete ux500/hash driver (subsumed by stm32/hash) - Add zlib support in qat - Add RSA support in aspeed" * tag 'v6.3-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (156 commits) crypto: x86/aria-avx - Do not use avx2 instructions crypto: aspeed - Fix modular aspeed-acry crypto: hisilicon/qm - fix coding style issues crypto: hisilicon/qm - update comments to match function crypto: hisilicon/qm - change function names crypto: hisilicon/qm - use min() instead of min_t() crypto: hisilicon/qm - remove some unused defines crypto: proc - Print fips status crypto: crypto4xx - Call dma_unmap_page when done crypto: octeontx2 - Fix objects shared between several modules crypto: nx - Fix sparse warnings crypto: ecc - Silence sparse warning tls: Pass rec instead of aead_req into tls_encrypt_done crypto: api - Remove completion function scaffolding tls: Remove completion function scaffolding tipc: Remove completion function scaffolding net: ipv6: Remove completion function scaffolding net: ipv4: Remove completion function scaffolding net: macsec: Remove completion function scaffolding dm: Remove completion function scaffolding ...
2023-02-22uaccess: Add speculation barrier to copy_from_user()Dave Hansen1-0/+7
The results of "access_ok()" can be mis-speculated. The result is that you can end speculatively: if (access_ok(from, size)) // Right here even for bad from/size combinations. On first glance, it would be ideal to just add a speculation barrier to "access_ok()" so that its results can never be mis-speculated. But there are lots of system calls just doing access_ok() via "copy_to_user()" and friends (example: fstat() and friends). Those are generally not problematic because they do not _consume_ data from userspace other than the pointer. They are also very quick and common system calls that should not be needlessly slowed down. "copy_from_user()" on the other hand uses a user-controller pointer and is frequently followed up with code that might affect caches. Take something like this: if (!copy_from_user(&kernelvar, uptr, size)) do_something_with(kernelvar); If userspace passes in an evil 'uptr' that *actually* points to a kernel addresses, and then do_something_with() has cache (or other) side-effects, it could allow userspace to infer kernel data values. Add a barrier to the common copy_from_user() code to prevent mis-speculated values which happen after the copy. Also add a stub for architectures that do not define barrier_nospec(). This makes the macro usable in generic code. Since the barrier is now usable in generic code, the x86 #ifdef in the BPF code can also go away. Reported-by: Jordy Zomer <jordyzomer@google.com> Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Daniel Borkmann <daniel@iogearbox.net> # BPF bits Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-02-21Merge tag 'hardening-v6.3-rc1' of ↵Linus Torvalds4-8/+104
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull hardening updates from Kees Cook: "Beyond some specific LoadPin, UBSAN, and fortify features, there are other fixes scattered around in various subsystems where maintainers were okay with me carrying them in my tree or were non-responsive but the patches were reviewed by others: - Replace 0-length and 1-element arrays with flexible arrays in various subsystems (Paulo Miguel Almeida, Stephen Rothwell, Kees Cook) - randstruct: Disable Clang 15 support (Eric Biggers) - GCC plugins: Drop -std=gnu++11 flag (Sam James) - strpbrk(): Refactor to use strchr() (Andy Shevchenko) - LoadPin LSM: Allow root filesystem switching when non-enforcing - fortify: Use dynamic object size hints when available - ext4: Fix CFI function prototype mismatch - Nouveau: Fix DP buffer size arguments - hisilicon: Wipe entire crypto DMA pool on error - coda: Fully allocate sig_inputArgs - UBSAN: Improve arm64 trap code reporting - copy_struct_from_user(): Add minimum bounds check on kernel buffer size" * tag 'hardening-v6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: randstruct: disable Clang 15 support uaccess: Add minimum bounds check on kernel buffer size arm64: Support Clang UBSAN trap codes for better reporting coda: Avoid partial allocation of sig_inputArgs gcc-plugins: drop -std=gnu++11 to fix GCC 13 build lib/string: Use strchr() in strpbrk() crypto: hisilicon: Wipe entire pool on error net/i40e: Replace 0-length array with flexible array io_uring: Replace 0-length array with flexible array ext4: Fix function prototype mismatch for ext4_feat_ktype i915/gvt: Replace one-element array with flexible-array member drm/nouveau/disp: Fix nvif_outp_acquire_dp() argument size LoadPin: Allow filesystem switch when not enforcing LoadPin: Move pin reporting cleanly out of locking LoadPin: Refactor sysctl initialization LoadPin: Refactor read-only check into a helper ARM: ixp4xx: Replace 0-length arrays with flexible arrays fortify: Use __builtin_dynamic_object_size() when available rxrpc: replace zero-lenth array with DECLARE_FLEX_ARRAY() helper
2023-02-21Merge tag 'irq-core-2023-02-20' of ↵Linus Torvalds2-0/+430
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "Updates for the interrupt subsystem: Core: - Move the interrupt affinity spreading mechanism into lib/group_cpus so it can be used for similar spreading requirements, e.g. in the block multi-queue code This also contains a first usecase in the block multi-queue code which Jens asked to take along with the librarization - Improve irqdomain locking to close a number race conditions which can be observed with massive parallel device driver probing - Enforce and document the semantics of disable_irq() which cannot be invoked safely from non-sleepable context - Move the IPI multiplexing code from the Apple AIC driver into the core, so it can be reused by RISCV Drivers: - Plug OF node refcounting leaks in various drivers - Correctly mark level triggered interrupts in the Broadcom L2 drivers - The usual small fixes and improvements - No new drivers for the record!" * tag 'irq-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits) irqchip/irq-bcm7120-l2: Set IRQ_LEVEL for level triggered interrupts irqchip/irq-brcmstb-l2: Set IRQ_LEVEL for level triggered interrupts irqdomain: Switch to per-domain locking irqchip/mvebu-odmi: Use irq_domain_create_hierarchy() irqchip/loongson-pch-msi: Use irq_domain_create_hierarchy() irqchip/gic-v3-mbi: Use irq_domain_create_hierarchy() irqchip/gic-v3-its: Use irq_domain_create_hierarchy() irqchip/gic-v2m: Use irq_domain_create_hierarchy() irqchip/alpine-msi: Use irq_domain_add_hierarchy() x86/uv: Use irq_domain_create_hierarchy() x86/ioapic: Use irq_domain_create_hierarchy() irqdomain: Clean up irq_domain_push/pop_irq() irqdomain: Drop leftover brackets irqdomain: Drop dead domain-name assignment irqdomain: Drop revmap mutex irqdomain: Fix domain registration race irqdomain: Fix mapping-creation race irqdomain: Refactor __irq_domain_alloc_irqs() irqdomain: Look for existing mapping only once irqdomain: Drop bogus fwspec-mapping error handling ...
2023-02-21Merge tag 'sched-core-2023-02-20' of ↵Linus Torvalds2-2/+18
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: - Improve the scalability of the CFS bandwidth unthrottling logic with large number of CPUs. - Fix & rework various cpuidle routines, simplify interaction with the generic scheduler code. Add __cpuidle methods as noinstr to objtool's noinstr detection and fix boatloads of cpuidle bugs & quirks. - Add new ABI: introduce MEMBARRIER_CMD_GET_REGISTRATIONS, to query previously issued registrations. - Limit scheduler slice duration to the sysctl_sched_latency period, to improve scheduling granularity with a large number of SCHED_IDLE tasks. - Debuggability enhancement on sys_exit(): warn about disabled IRQs, but also enable them to prevent a cascade of followup problems and repeat warnings. - Fix the rescheduling logic in prio_changed_dl(). - Micro-optimize cpufreq and sched-util methods. - Micro-optimize ttwu_runnable() - Micro-optimize the idle-scanning in update_numa_stats(), select_idle_capacity() and steal_cookie_task(). - Update the RSEQ code & self-tests - Constify various scheduler methods - Remove unused methods - Refine __init tags - Documentation updates - Misc other cleanups, fixes * tag 'sched-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (110 commits) sched/rt: pick_next_rt_entity(): check list_entry sched/deadline: Add more reschedule cases to prio_changed_dl() sched/fair: sanitize vruntime of entity being placed sched/fair: Remove capacity inversion detection sched/fair: unlink misfit task from cpu overutilized objtool: mem*() are not uaccess safe cpuidle: Fix poll_idle() noinstr annotation sched/clock: Make local_clock() noinstr sched/clock/x86: Mark sched_clock() noinstr x86/pvclock: Improve atomic update of last_value in pvclock_clocksource_read() x86/atomics: Always inline arch_atomic64*() cpuidle: tracing, preempt: Squash _rcuidle tracing cpuidle: tracing: Warn about !rcu_is_watching() cpuidle: lib/bug: Disable rcu_is_watching() during WARN/BUG cpuidle: drivers: firmware: psci: Dont instrument suspend code KVM: selftests: Fix build of rseq test exit: Detect and fix irq disabled state in oops cpuidle, arm64: Fix the ARM64 cpuidle logic cpuidle: mvebu: Fix duplicate flags assignment sched/fair: Limit sched slice duration ...
2023-02-21test_kprobes: Add recursed kprobe test caseMasami Hiramatsu (Google)1-2/+37
Add a recursed kprobe test case to the KUnit test module for kprobes. This will probe a function which is called from the pre_handler and post_handler itself. If the kprobe is correctly implemented, the recursed kprobe handlers will be skipped and the number of skipped kprobe will be counted on kprobe::nmissed. Link: https://lore.kernel.org/all/167414238758.2301956.258548940194352895.stgit@devnote3/ Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
2023-02-21iov_iter: Add a function to extract a page list from an iteratorDavid Howells1-0/+264
Add a function, iov_iter_extract_pages(), to extract a list of pages from an iterator. The pages may be returned with a pin added or nothing, depending on the type of iterator. Add a second function, iov_iter_extract_will_pin(), to determine how the cleanup should be done. There are two cases: (1) ITER_IOVEC or ITER_UBUF iterator. Extracted pages will have pins (FOLL_PIN) obtained on them so that a concurrent fork() will forcibly copy the page so that DMA is done to/from the parent's buffer and is unavailable to/unaffected by the child process. iov_iter_extract_will_pin() will return true for this case. The caller should use something like unpin_user_page() to dispose of the page. (2) Any other sort of iterator. No refs or pins are obtained on the page, the assumption is made that the caller will manage page retention. iov_iter_extract_will_pin() will return false. The pages don't need additional disposal. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jens Axboe <axboe@kernel.dk> cc: Al Viro <viro@zeniv.linux.org.uk> cc: John Hubbard <jhubbard@nvidia.com> cc: David Hildenbrand <david@redhat.com> cc: Matthew Wilcox <willy@infradead.org> cc: linux-fsdevel@vger.kernel.org cc: linux-mm@kvack.org Signed-off-by: Steve French <stfrench@microsoft.com>
2023-02-21iov_iter: Define flags to qualify page extraction.David Howells1-6/+8
Define flags to qualify page extraction to pass into iov_iter_*_pages*() rather than passing in FOLL_* flags. For now only a flag to allow peer-to-peer DMA is supported. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Jens Axboe <axboe@kernel.dk> cc: Al Viro <viro@zeniv.linux.org.uk> cc: Logan Gunthorpe <logang@deltatee.com> cc: linux-fsdevel@vger.kernel.org cc: linux-block@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com>
2023-02-21splice: Add a func to do a splice from a buffered file without ITER_PIPEDavid Howells1-6/+0
Provide a function to do splice read from a buffered file, pulling the folios out of the pagecache directly by calling filemap_get_pages() to do any required reading and then pasting the returned folios into the pipe. A helper function is provided to do the actual folio pasting and will handle multipage folios by splicing as many of the relevant subpages as will fit into the pipe. The code is loosely based on filemap_read() and might belong in mm/filemap.c with that as it needs to use filemap_get_pages(). Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jens Axboe <axboe@kernel.dk> cc: Christoph Hellwig <hch@lst.de> cc: Al Viro <viro@zeniv.linux.org.uk> cc: David Hildenbrand <david@redhat.com> cc: John Hubbard <jhubbard@nvidia.com> cc: linux-mm@kvack.org cc: linux-block@vger.kernel.org cc: linux-fsdevel@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com>
2023-02-21Merge tag 'for-6.3/block-2023-02-16' of git://git.kernel.dk/linuxLinus Torvalds1-57/+45
Pull block updates from Jens Axboe: - NVMe updates via Christoph: - Small improvements to the logging functionality (Amit Engel) - Authentication cleanups (Hannes Reinecke) - Cleanup and optimize the DMA mapping cod in the PCIe driver (Keith Busch) - Work around the command effects for Format NVM (Keith Busch) - Misc cleanups (Keith Busch, Christoph Hellwig) - Fix and cleanup freeing single sgl (Keith Busch) - MD updates via Song: - Fix a rare crash during the takeover process - Don't update recovery_cp when curr_resync is ACTIVE - Free writes_pending in md_stop - Change active_io to percpu - Updates to drbd, inching us closer to unifying the out-of-tree driver with the in-tree one (Andreas, Christoph, Lars, Robert) - BFQ update adding support for multi-actuator drives (Paolo, Federico, Davide) - Make brd compliant with REQ_NOWAIT (me) - Fix for IOPOLL and queue entering, fixing stalled IO waiting on timeouts (me) - Fix for REQ_NOWAIT with multiple bios (me) - Fix memory leak in blktrace cleanup (Greg) - Clean up sbitmap and fix a potential hang (Kemeng) - Clean up some bits in BFQ, and fix a bug in the request injection (Kemeng) - Clean up the request allocation and issue code, and fix some bugs related to that (Kemeng) - ublk updates and fixes: - Add support for unprivileged ublk (Ming) - Improve device deletion handling (Ming) - Misc (Liu, Ziyang) - s390 dasd fixes (Alexander, Qiheng) - Improve utility of request caching and fixes (Anuj, Xiao) - zoned cleanups (Pankaj) - More constification for kobjs (Thomas) - blk-iocost cleanups (Yu) - Remove bio splitting from drivers that don't need it (Christoph) - Switch blk-cgroups to use struct gendisk. Some of this is now incomplete as select late reverts were done. (Christoph) - Add bvec initialization helpers, and convert callers to use that rather than open-coding it (Christoph) - Misc fixes and cleanups (Jinke, Keith, Arnd, Bart, Li, Martin, Matthew, Ulf, Zhong) * tag 'for-6.3/block-2023-02-16' of git://git.kernel.dk/linux: (169 commits) brd: use radix_tree_maybe_preload instead of radix_tree_preload block: use proper return value from bio_failfast() block: bio-integrity: Copy flags when bio_integrity_payload is cloned block: Fix io statistics for cgroup in throttle path brd: mark as nowait compatible brd: check for REQ_NOWAIT and set correct page allocation mask brd: return 0/-error from brd_insert_page() block: sync mixed merged request's failfast with 1st bio's Revert "blk-cgroup: pin the gendisk in struct blkcg_gq" Revert "blk-cgroup: pass a gendisk to blkg_lookup" Revert "blk-cgroup: delay blk-cgroup initialization until add_disk" Revert "blk-cgroup: delay calling blkcg_exit_disk until disk_release" Revert "blk-cgroup: move the cgroup information to struct gendisk" nvme-pci: remove iod use_sgls nvme-pci: fix freeing single sgl block: ublk: check IO buffer based on flag need_get_data s390/dasd: Fix potential memleak in dasd_eckd_init() s390/dasd: sort out physical vs virtual pointers usage block: Remove the ALLOC_CACHE_SLACK constant block: make kobj_type structures constant ...
2023-02-21Merge tag 'for-6.3/iter-ubuf-2023-02-16' of git://git.kernel.dk/linuxLinus Torvalds1-2/+13
Pull io_uring ITER_UBUF conversion from Jens Axboe: "Since we now have ITER_UBUF available, switch to using it for single ranges as it's more efficient than ITER_IOVEC for that" * tag 'for-6.3/iter-ubuf-2023-02-16' of git://git.kernel.dk/linux: block: use iter_ubuf for single range iov_iter: move iter_ubuf check inside restore WARN io_uring: use iter_ubuf for single range imports io_uring: switch network send/recv to ITER_UBUF iov: add import_ubuf()
2023-02-19Merge tag 'irqchip-6.3' of ↵Thomas Gleixner1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core Pull irqchip updates from Marc Zyngier: - New and improved irqdomain locking, closing a number of races that became apparent now that we are able to probe drivers in parallel - A bunch of OF node refcounting bugs have been fixed - We now have a new IPI mux, lifted from the Apple AIC code and made common. It is expected that riscv will eventually benefit from it - Two small fixes for the Broadcom L2 drivers - Various cleanups and minor bug fixes Link: https://lore.kernel.org/r/20230218143452.3817627-1-maz@kernel.org
2023-02-17Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-19/+20
Some of the devlink bits were tricky, but I think I got it right. Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-17maple_tree: reduce stack usage with gcc-9 and earlierArnd Bergmann1-2/+9
gcc-10 changed the way inlining works to be less aggressive, but older versions run into an oversized stack frame warning whenever CONFIG_KASAN_STACK is enabled, as that forces variables from inlined callees to be non-overlapping: lib/maple_tree.c: In function 'mas_wr_bnode': lib/maple_tree.c:4320:1: error: the frame size of 1424 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] Change the annotations on mas_store_b_node() and mas_commit_b_node() to explicitly forbid inlining in this configuration, which is the same behavior that newer versions already have. Link: https://lkml.kernel.org/r/20230214103030.1051950-1-arnd@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Vernon Yang <vernon2gm@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-17lib/stackdepot: move documentation comments to stackdepot.hAndrey Konovalov1-87/+0
Move all interface- and usage-related documentation comments to include/linux/stackdepot.h. It makes sense to have them in the header where they are available to the interface users. [akpm@linux-foundation.org: grammar fix, per Alexander] Link: https://lkml.kernel.org/r/fbfee41495b306dd8881f9b1c1b80999c885e82f.1676063693.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-17lib/stackdepot: various comments clean-upsAndrey Konovalov1-61/+59
Clean up comments in include/linux/stackdepot.h and lib/stackdepot.c: 1. Rework the initialization comment in stackdepot.h. 2. Rework the header comment in stackdepot.c. 3. Various clean-ups for other comments. Also adjust whitespaces for find_stack and depot_alloc_stack call sites. No functional changes. Link: https://lkml.kernel.org/r/5836231b7954355e2311fc9b5870f697ea8e1f7d.1676063693.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-17lib/stackdepot: annotate racy pool_index accessesAndrey Konovalov1-4/+13
Accesses to pool_index are protected by pool_lock everywhere except in a sanity check in stack_depot_fetch. The read access there can race with the write access in depot_alloc_stack. Use WRITE/READ_ONCE() to annotate the racy accesses. As the sanity check is only used to print a warning in case of a violation of the stack depot interface usage, it does not make a lot of sense to use proper synchronization. [andreyknvl@google.com: s/pool_index/pool_index_cached/ in stack_depot_fetch()] Link: https://lkml.kernel.org/r/95cf53f0da2c112aa2cc54456cbcd6975c3ff343.1676129911.git.andreyknvl@google.com Link: https://lkml.kernel.org/r/359ac9c13cd0869c56740fb2029f505e41593830.1676063693.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-17lib/stacktrace, kasan, kmsan: rework extra_bits interfaceAndrey Konovalov1-9/+33
The current implementation of the extra_bits interface is confusing: passing extra_bits to __stack_depot_save makes it seem that the extra bits are somehow stored in stack depot. In reality, they are only embedded into a stack depot handle and are not used within stack depot. Drop the extra_bits argument from __stack_depot_save and instead provide a new stack_depot_set_extra_bits function (similar to the exsiting stack_depot_get_extra_bits) that saves extra bits into a stack depot handle. Update the callers of __stack_depot_save to use the new interace. This change also fixes a minor issue in the old code: __stack_depot_save does not return NULL if saving stack trace fails and extra_bits is used. Link: https://lkml.kernel.org/r/317123b5c05e2f82854fc55d8b285e0869d3cb77.1676063693.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-17lib/stackdepot: rename next_pool_inited to next_pool_requiredAndrey Konovalov1-9/+21
Stack depot uses next_pool_inited to mark that either the next pool is initialized or the limit on the number of pools is reached. However, the flag name only reflects the former part of its purpose, which is confusing. Rename next_pool_inited to next_pool_required and invert its value. Also annotate usages of next_pool_required with comments. Link: https://lkml.kernel.org/r/484fd2695dff7a9bdc437a32f8a6ee228535aa02.1676063693.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-17lib/stackdepot: annotate depot_init_pool and depot_alloc_stackAndrey Konovalov1-10/+24
Clean up the exisiting comments and add new ones to depot_init_pool and depot_alloc_stack. As a part of the clean-up, remove mentions of which variable is accessed by smp_store_release and smp_load_acquire: it is clear as is from the code. Link: https://lkml.kernel.org/r/f80b02951364e6b40deda965b4003de0cd1a532d.1676063693.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-17lib/stacktrace: drop impossible WARN_ON for depot_init_poolAndrey Konovalov1-7/+5
depot_init_pool has two call sites: 1. In depot_alloc_stack with a potentially NULL prealloc. 2. In __stack_depot_save with a non-NULL prealloc. At the same time depot_init_pool can only return false when prealloc is NULL. As the second call site makes sure that prealloc is not NULL, the WARN_ON there can never trigger. Thus, drop the WARN_ON and also move the prealloc check from depot_init_pool to its first call site. Also change the return type of depot_init_pool to void as it now always returns true. Link: https://lkml.kernel.org/r/ce149f9bdcbc80a92549b54da67eafb27f846b7b.1676063693.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-17lib/stackdepot: rename init_stack_poolAndrey Konovalov1-5/+5
Rename init_stack_pool to depot_init_pool to align the name with depot_alloc_stack. No functional changes. Link: https://lkml.kernel.org/r/23106a3e291d8df0aba33c0e2fe86dc596286479.1676063693.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-17lib/stackdepot: rename handle and pool constantsAndrey Konovalov1-29/+27
Change the "STACK_ALLOC_" prefix to "DEPOT_" for the constants that define the number of bits in stack depot handles and the maximum number of pools. The old prefix is unclear and makes wonder about how these constants are related to stack allocations. The new prefix is also shorter. Also simplify the comment for DEPOT_POOL_ORDER. No functional changes. Link: https://lkml.kernel.org/r/84fcceb0acc261a356a0ad4bdfab9ff04bea2445.1676063693.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-17lib/stackdepot: rename slab to poolAndrey Konovalov1-53/+53
Use "pool" instead of "slab" for naming memory regions stack depot uses to store stack traces. Using "slab" is confusing, as stack depot pools have nothing to do with the slab allocator. Also give better names to pool-related global variables: change "depot_" prefix to "pool_" to point out that these variables are related to stack depot pools. Also rename the slabindex (poolindex) field in handle_parts to pool_index to align its name with the pool_index global variable. No functional changes. Link: https://lkml.kernel.org/r/923c507edb350c3b6ef85860f36be489dfc0ad21.1676063693.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-17lib/stackdepot: rename hash table constants and variablesAndrey Konovalov1-21/+21
Give more meaningful names to hash table-related constants and variables: 1. Rename STACK_HASH_SCALE to STACK_HASH_TABLE_SCALE to point out that it is related to scaling the hash table. 2. Rename STACK_HASH_ORDER_MIN/MAX to STACK_BUCKET_NUMBER_ORDER_MIN/MAX to point out that it is related to the number of hash table buckets. 3. Rename stack_hash_order to stack_bucket_number_order for the same reason as #2. No functional changes. Link: https://lkml.kernel.org/r/f166dd6f3cb2378aea78600714393dd568c33ee9.1676063693.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-17lib/stackdepot: reorder and annotate global variablesAndrey Konovalov1-10/+17
Group stack depot global variables by their purpose: 1. Hash table-related variables, 2. Slab-related variables, and add comments. Also clean up comments for hash table-related constants. Link: https://lkml.kernel.org/r/5606a6c70659065a25bee59cd10e57fc60bb4110.1676063693.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-17lib/stackdepot: lower the indentation in stack_depot_initAndrey Konovalov1-33/+37
stack_depot_init does most things inside an if check. Move them out and use a goto statement instead. No functional changes. Link: https://lkml.kernel.org/r/8e382f1f0c352e4b2ad47326fec7782af961fe8e.1676063693.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-17lib/stackdepot: annotate init and early init functionsAndrey Konovalov1-6/+21
Add comments to stack_depot_early_init and stack_depot_init to explain certain parts of their implementation. Also add a pr_info message to stack_depot_early_init similar to the one in stack_depot_init. Also move the scale variable in stack_depot_init to the scope where it is being used. Link: https://lkml.kernel.org/r/d17fbfbd4d73f38686c5e3d4824a6d62047213a1.1676063693.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-17lib/stackdepot: rename stack_depot_disableAndrey Konovalov1-10/+10
Rename stack_depot_disable to stack_depot_disabled to make its name look similar to the names of other stack depot flags. Also put stack_depot_disabled's definition together with the other flags. Also rename is_stack_depot_disabled to disable_stack_depot: this name looks more conventional for a function that processes a boot parameter. No functional changes. Link: https://lkml.kernel.org/r/d78a07d222e689926e5ead229e4a2e3d87dc9aa7.1676063693.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-17lib/stackdepot, mm: rename stack_depot_want_early_initAndrey Konovalov1-5/+5
Rename stack_depot_want_early_init to stack_depot_request_early_init. The old name is confusing, as it hints at returning some kind of intention of stack depot. The new name reflects that this function requests an action from stack depot instead. No functional changes. [akpm@linux-foundation.org: update mm/kmemleak.c] Link: https://lkml.kernel.org/r/359f31bf67429a06e630b4395816a967214ef753.1676063693.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>