summaryrefslogtreecommitdiff
path: root/mm/kasan/report.c
AgeCommit message (Collapse)AuthorFilesLines
2022-03-25kasan: move and simplify kasan_report_asyncAndrey Konovalov1-14/+14
Place kasan_report_async() next to the other main reporting routines. Also simplify printed information. Link: https://lkml.kernel.org/r/52d942ef3ffd29bdfa225bbe8e327bc5bda7ab09.1646237226.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Marco Elver <elver@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25kasan: call print_report from kasan_report_invalid_freeAndrey Konovalov1-16/+26
Call print_report() in kasan_report_invalid_free() instead of calling printing functions directly. Compared to the existing implementation of kasan_report_invalid_free(), print_report() makes sure that the buggy address has metadata before printing it. The change requires adding a report type field into kasan_access_info and using it accordingly. kasan_report_async() is left as is, as using print_report() will only complicate the code. Link: https://lkml.kernel.org/r/9ea6f0604c5d2e1fb28d93dc6c44232c1f8017fe.1646237226.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Marco Elver <elver@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25kasan: merge __kasan_report into kasan_reportAndrey Konovalov1-21/+15
Merge __kasan_report() into kasan_report(). The code is simple enough to be readable without the __kasan_report() helper. Link: https://lkml.kernel.org/r/c8a125497ef82f7042b3795918dffb81a85a878e.1646237226.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Marco Elver <elver@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25kasan: restructure kasan_reportAndrey Konovalov1-6/+9
Restructure kasan_report() to make reviewing the subsequent patches easier. Link: https://lkml.kernel.org/r/ca28042889858b8cc4724d3d4378387f90d7a59d.1646237226.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Marco Elver <elver@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25kasan: simplify kasan_find_first_bad_addr call sitesAndrey Konovalov1-4/+1
Move the addr_has_metadata() check into kasan_find_first_bad_addr(). Link: https://lkml.kernel.org/r/a49576f7a23283d786ba61579cb0c5057e8f0b9b.1646237226.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Marco Elver <elver@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25kasan: split out print_report from __kasan_reportAndrey Konovalov1-27/+31
Split out the part of __kasan_report() that prints things into print_report(). One of the subsequent patches makes another error handler use print_report() as well. Includes lower-level changes: - Allow addr_has_metadata() accepting a tagged address. - Drop the const qualifier from the fields of kasan_access_info to avoid excessive type casts. - Change the type of the address argument of __kasan_report() and end_report() to void * to reduce the number of type casts. Link: https://lkml.kernel.org/r/9be3ed99dd24b9c4e1c4a848b69a0c6ecefd845e.1646237226.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Marco Elver <elver@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25kasan: move disable_trace_on_warning to start_reportAndrey Konovalov1-1/+2
Move the disable_trace_on_warning() call, which enables the /proc/sys/kernel/traceoff_on_warning interface for KASAN bugs, to start_report(), so that it functions for all types of KASAN reports. Link: https://lkml.kernel.org/r/7c066c5de26234ad2cebdd931adfe437f8a95d58.1646237226.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Marco Elver <elver@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25kasan: move update_kunit_status to start_reportAndrey Konovalov1-41/+34
Instead of duplicating calls to update_kunit_status() in every error report routine, call it once in start_report(). Pass the sync flag as an additional argument to start_report(). Link: https://lkml.kernel.org/r/cae5c845a0b6f3c867014e53737cdac56b11edc7.1646237226.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Marco Elver <elver@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25kasan: check CONFIG_KASAN_KUNIT_TEST instead of CONFIG_KUNITAndrey Konovalov1-1/+1
Check the more specific CONFIG_KASAN_KUNIT_TEST config option when defining things related to KUnit-compatible KASAN tests instead of CONFIG_KUNIT. Also put the kunit_kasan_status definition next to the definitons of other KASAN-related structs. Link: https://lkml.kernel.org/r/223592d38d2a601a160a3b2b3d5a9f9090350e62.1646237226.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Marco Elver <elver@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25kasan: simplify kasan_update_kunit_status() and call sitesAndrey Konovalov1-16/+14
- Rename kasan_update_kunit_status() to update_kunit_status() (the function is static). - Move the IS_ENABLED(CONFIG_KUNIT) to the function's definition instead of duplicating it at call sites. - Obtain and check current->kunit_test within the function. Link: https://lkml.kernel.org/r/dac26d811ae31856c3d7666de0b108a3735d962d.1646237226.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Marco Elver <elver@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25kasan: simplify async check in end_report()Andrey Konovalov1-1/+1
Currently, end_report() does not call trace_error_report_end() for bugs detected in either async or asymm mode (when kasan_async_fault_possible() returns true), as the address of the bad access might be unknown. However, for asymm mode, the address is known for faults triggered by read operations. Instead of using kasan_async_fault_possible(), simply check that the addr is not NULL when calling trace_error_report_end(). Link: https://lkml.kernel.org/r/1c8ce43f97300300e62c941181afa2eb738965c5.1646237226.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Marco Elver <elver@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25kasan: rearrange stack frame info in reportsAndrey Konovalov1-3/+9
- Move printing stack frame info before printing page info. - Add object_is_on_stack() check to print_address_description() and add a corresponding WARNING to kasan_print_address_stack_frame(). This looks more in line with the rest of the checks in this function and also allows to avoid complicating code logic wrt line breaks. - Clean up comments related to get_address_stack_frame_info(). Link: https://lkml.kernel.org/r/1ee113a4c111df97d168c820b527cda77a3cac40.1646237226.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Marco Elver <elver@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25kasan: more line breaks in reportsAndrey Konovalov1-2/+5
Add a line break after each part that describes the buggy address. Improves readability of reports. Link: https://lkml.kernel.org/r/8682c4558e533cd0f99bdb964ce2fe741f2a9212.1646237226.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Marco Elver <elver@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25kasan: drop addr check from describe_object_addrAndrey Konovalov1-3/+0
Patch series "kasan: report clean-ups and improvements". A number of clean-up patches for KASAN reporting code. Most are non-functional and only improve readability. This patch (of 22): describe_object_addr() used to be called with NULL addr in the early days of KASAN. This no longer happens, so drop the check. Link: https://lkml.kernel.org/r/cover.1646237226.git.andreyknvl@google.com Link: https://lkml.kernel.org/r/761f8e5a6ee040d665934d916a90afe9f322f745.1646237226.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Marco Elver <elver@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25kasan: print virtual mapping info in reportsAndrey Konovalov1-1/+14
Print virtual mapping range and its creator in reports affecting virtual mappings. Also get physical page pointer for such mappings, so page information gets printed as well. Link: https://lkml.kernel.org/r/6ebb11210ae21253198e264d4bb0752c1fad67d7.1645548178.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitriy Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25kasan: test: support async (again) and asymm modes for HW_TAGSAndrey Konovalov1-8/+9
Async mode support has already been implemented in commit e80a76aa1a91 ("kasan, arm64: tests supports for HW_TAGS async mode") but then got accidentally broken in commit 99734b535d9b ("kasan: detect false-positives in tests"). Restore the changes removed by the latter patch and adapt them for asymm mode: add a sync_fault flag to kunit_kasan_expectation that only get set if the MTE fault was synchronous, and reenable MTE on such faults in tests. Also rename kunit_kasan_expectation to kunit_kasan_status and move its definition to mm/kasan/kasan.h from include/linux/kasan.h, as this structure is only internally used by KASAN. Also put the structure definition under IS_ENABLED(CONFIG_KUNIT). Link: https://lkml.kernel.org/r/133970562ccacc93ba19d754012c562351d4a8c8.1645033139.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Cc: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-24kasan: no need to unset panic_on_warn in end_report()Tiezhu Yang1-9/+1
panic_on_warn is unset inside panic(), so no need to unset it before calling panic() in end_report(). Link: https://lkml.kernel.org/r/1644324666-15947-6-git-send-email-yangtiezhu@loongson.cn Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Reviewed-by: Marco Elver <elver@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Baoquan He <bhe@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Xuefeng Li <lixuefeng@loongson.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-06mm/kasan: Convert to struct folio and struct slabMatthew Wilcox (Oracle)1-2/+11
KASAN accesses some slab related struct page fields so we need to convert it to struct slab. Some places are a bit simplified thanks to kasan_addr_to_slab() encapsulating the PageSlab flag check through virt_to_slab(). When resolving object address to either a real slab or a large kmalloc, use struct folio as the intermediate type for testing the slab flag to avoid unnecessary implicit compound_head(). [ vbabka@suse.cz: use struct folio, adjust to differences in previous patches ] Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Reviewed-by: Roman Gushchin <guro@fb.com> Tested-by: Hyeongogn Yoo <42.hyeyoo@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: <kasan-dev@googlegroups.com>
2022-01-06mm: Convert struct page to struct slab in functions used by other subsystemsVlastimil Babka1-1/+1
KASAN, KFENCE and memcg interact with SLAB or SLUB internals through functions nearest_obj(), obj_to_index() and objs_per_slab() that use struct page as parameter. This patch converts it to struct slab including all callers, through a coccinelle semantic patch. // Options: --include-headers --no-includes --smpl-spacing include/linux/slab_def.h include/linux/slub_def.h mm/slab.h mm/kasan/*.c mm/kfence/kfence_test.c mm/memcontrol.c mm/slab.c mm/slub.c // Note: needs coccinelle 1.1.1 to avoid breaking whitespace @@ @@ -objs_per_slab_page( +objs_per_slab( ... ) { ... } @@ @@ -objs_per_slab_page( +objs_per_slab( ... ) @@ identifier fn =~ "obj_to_index|objs_per_slab"; @@ fn(..., - const struct page *page + const struct slab *slab ,...) { <... ( - page_address(page) + slab_address(slab) | - page + slab ) ...> } @@ identifier fn =~ "nearest_obj"; @@ fn(..., - struct page *page + const struct slab *slab ,...) { <... ( - page_address(page) + slab_address(slab) | - page + slab ) ...> } @@ identifier fn =~ "nearest_obj|obj_to_index|objs_per_slab"; expression E; @@ fn(..., ( - slab_page(E) + E | - virt_to_page(E) + virt_to_slab(E) | - virt_to_head_page(E) + virt_to_slab(E) | - page + page_slab(page) ) ,...) Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Reviewed-by: Roman Gushchin <guro@fb.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Julia Lawall <julia.lawall@inria.fr> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Marco Elver <elver@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: <kasan-dev@googlegroups.com> Cc: <cgroups@vger.kernel.org>
2021-11-09Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-13/+4
Merge more updates from Andrew Morton: "87 patches. Subsystems affected by this patch series: mm (pagecache and hugetlb), procfs, misc, MAINTAINERS, lib, checkpatch, binfmt, kallsyms, ramfs, init, codafs, nilfs2, hfs, crash_dump, signals, seq_file, fork, sysvfs, kcov, gdb, resource, selftests, and ipc" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (87 commits) ipc/ipc_sysctl.c: remove fallback for !CONFIG_PROC_SYSCTL ipc: check checkpoint_restore_ns_capable() to modify C/R proc files selftests/kselftest/runner/run_one(): allow running non-executable files virtio-mem: disallow mapping virtio-mem memory via /dev/mem kernel/resource: disallow access to exclusive system RAM regions kernel/resource: clean up and optimize iomem_is_exclusive() scripts/gdb: handle split debug for vmlinux kcov: replace local_irq_save() with a local_lock_t kcov: avoid enable+disable interrupts if !in_task() kcov: allocate per-CPU memory on the relevant node Documentation/kcov: define `ip' in the example Documentation/kcov: include types.h in the example sysv: use BUILD_BUG_ON instead of runtime check kernel/fork.c: unshare(): use swap() to make code cleaner seq_file: fix passing wrong private data seq_file: move seq_escape() to a header signal: remove duplicate include in signal.h crash_dump: remove duplicate include in crash_dump.h crash_dump: fix boolreturn.cocci warning hfs/hfsplus: use WARN_ON for sanity check ...
2021-11-09mm: kasan: use is_kernel() helperKefeng Wang1-1/+1
Directly use is_kernel() helper in kernel_or_module_addr(). Link: https://lkml.kernel.org/r/20210930071143.63410-8-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by: Alexander Potapenko <glider@google.com> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Mackerras <paulus@samba.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-09lib, stackdepot: add helper to print stack entriesImran Khan1-12/+3
To print a stack entries, users of stackdepot, first use stack_depot_fetch to get a list of stack entries and then use stack_trace_print to print this list. Provide a helper in stackdepot to print stack entries based on stackdepot handle. Also change above mentioned users to use this helper. Link: https://lkml.kernel.org/r/20210915014806.3206938-3-imran.f.khan@oracle.com Signed-off-by: Imran Khan <imran.f.khan@oracle.com> Suggested-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: David Airlie <airlied@linux.ie> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-10-07kasan: Extend KASAN mode kernel parameterVincenzo Frascino1-1/+1
Architectures supported by KASAN_HW_TAGS can provide an asymmetric mode of execution. On an MTE enabled arm64 hw for example this can be identified with the asymmetric tagging mode of execution. In particular, when such a mode is present, the CPU triggers a fault on a tag mismatch during a load operation and asynchronously updates a register when a tag mismatch is detected during a store operation. Extend the KASAN HW execution mode kernel command line parameter to support asymmetric mode. Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Link: https://lore.kernel.org/r/20211006154751.4463-6-vincenzo.frascino@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2021-09-03mm/kasan: move kasan.fault to mm/kasan/report.cWoody Lin1-3/+26
Move the boot parameter 'kasan.fault' from hw_tags.c to report.c, so it can support all KASAN modes - generic, and both tag-based. Link: https://lkml.kernel.org/r/20210713010536.3161822-1-woodylin@google.com Signed-off-by: Woody Lin <woodylin@google.com> Reviewed-by: Marco Elver <elver@google.com> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29kasan: use dump_stack_lvl(KERN_ERR) to print stacksAlexander Potapenko1-3/+3
Most of the contents of KASAN reports are printed with pr_err(), so use a consistent logging level to print the memory access stacks. Link: https://lkml.kernel.org/r/20210506105405.3535023-2-glider@google.com Signed-off-by: Alexander Potapenko <glider@google.com> Reviewed-by: Marco Elver <elver@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Prasad Sodagudi <psodagud@quicinc.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: he, bo <bo.he@intel.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Yanmin Zhang <yanmin_zhang@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-04-11kasan, arm64: tests supports for HW_TAGS async modeAndrey Konovalov1-0/+5
This change adds KASAN-KUnit tests support for the async HW_TAGS mode. In async mode, tag fault aren't being generated synchronously when a bad access happens, but are instead explicitly checked for by the kernel. As each KASAN-KUnit test expect a fault to happen before the test is over, check for faults as a part of the test handler. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Andrey Konovalov <andreyknvl@google.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Link: https://lore.kernel.org/r/20210315132019.33202-10-vincenzo.frascino@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-04-11kasan: Add report for async modeVincenzo Frascino1-1/+16
KASAN provides an asynchronous mode of execution. Add reporting functionality for this mode. Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Andrey Konovalov <andreyknvl@google.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Andrey Konovalov <andreyknvl@google.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Link: https://lore.kernel.org/r/20210315132019.33202-5-vincenzo.frascino@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-02-26kasan: use error_report_end tracepointAlexander Potapenko1-3/+5
Make it possible to trace KASAN error reporting. A good usecase is watching for trace events from the userspace to detect and process memory corruption reports from the kernel. Link: https://lkml.kernel.org/r/20210121131915.1331302-4-glider@google.com Signed-off-by: Alexander Potapenko <glider@google.com> Suggested-by: Marco Elver <elver@google.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-25kasan: add compiler barriers to KUNIT_EXPECT_KASAN_FAILAndrey Konovalov1-1/+1
It might not be obvious to the compiler that the expression must be executed between writing and reading to fail_data. In this case, the compiler might reorder or optimize away some of the accesses, and the tests will fail. Add compiler barriers around the expression in KUNIT_EXPECT_KASAN_FAIL and use READ/WRITE_ONCE() for accessing fail_data fields. Link: https://linux-review.googlesource.com/id/I046079f48641a1d36fe627fc8827a9249102fd50 Link: https://lkml.kernel.org/r/6f11596f367d8ae8f71d800351e9a5d91eda19f6.1610733117.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Marco Elver <elver@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Peter Collingbourne <pcc@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-25kasan: prefix global functions with kasan_Andrey Konovalov1-6/+7
Patch series "kasan: HW_TAGS tests support and fixes", v4. This patchset adds support for running KASAN-KUnit tests with the hardware tag-based mode and also contains a few fixes. This patch (of 15): There's a number of internal KASAN functions that are used across multiple source code files and therefore aren't marked as static inline. To avoid littering the kernel function names list with generic function names, prefix all such KASAN functions with kasan_. As a part of this change: - Rename internal (un)poison_range() to kasan_(un)poison() (no _range) to avoid name collision with a public kasan_unpoison_range(). - Rename check_memory_region() to kasan_check_range(), as it's a more fitting name. Link: https://lkml.kernel.org/r/cover.1610733117.git.andreyknvl@google.com Link: https://linux-review.googlesource.com/id/I719cc93483d4ba288a634dba80ee6b7f2809cd26 Link: https://lkml.kernel.org/r/13777aedf8d3ebbf35891136e1f2287e2f34aaba.1610733117.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Suggested-by: Marco Elver <elver@google.com> Reviewed-by: Marco Elver <elver@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Peter Collingbourne <pcc@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan: sanitize objects when metadata doesn't fitAndrey Konovalov1-20/+23
KASAN marks caches that are sanitized with the SLAB_KASAN cache flag. Currently if the metadata that is appended after the object (stores e.g. stack trace ids) doesn't fit into KMALLOC_MAX_SIZE (can only happen with SLAB, see the comment in the patch), KASAN turns off sanitization completely. With this change sanitization of the object data is always enabled. However the metadata is only stored when it fits. Instead of checking for SLAB_KASAN flag accross the code to find out whether the metadata is there, use cache->kasan_info.alloc/free_meta_offset. As 0 can be a valid value for free_meta_offset, introduce KASAN_NO_FREE_META as an indicator that the free metadata is missing. Without this change all sanitized KASAN objects would be put into quarantine with generic KASAN. With this change, only the objects that have metadata (i.e. when it fits) are put into quarantine, the rest is freed right away. Along the way rework __kasan_cache_create() and add claryfying comments. Link: https://lkml.kernel.org/r/aee34b87a5e4afe586c2ac6a0b32db8dc4dcc2dc.1606162397.git.andreyknvl@google.com Link: https://linux-review.googlesource.com/id/Icd947e2bea054cb5cfbdc6cf6652227d97032dcb Co-developed-by: Vincenzo Frascino <Vincenzo.Frascino@arm.com> Signed-off-by: Vincenzo Frascino <Vincenzo.Frascino@arm.com> Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Marco Elver <elver@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan: add and integrate kasan boot parametersAndrey Konovalov1-2/+12
Hardware tag-based KASAN mode is intended to eventually be used in production as a security mitigation. Therefore there's a need for finer control over KASAN features and for an existence of a kill switch. This change adds a few boot parameters for hardware tag-based KASAN that allow to disable or otherwise control particular KASAN features. The features that can be controlled are: 1. Whether KASAN is enabled at all. 2. Whether KASAN collects and saves alloc/free stacks. 3. Whether KASAN panics on a detected bug or not. With this change a new boot parameter kasan.mode allows to choose one of three main modes: - kasan.mode=off - KASAN is disabled, no tag checks are performed - kasan.mode=prod - only essential production features are enabled - kasan.mode=full - all KASAN features are enabled The chosen mode provides default control values for the features mentioned above. However it's also possible to override the default values by providing: - kasan.stacktrace=off/on - enable alloc/free stack collection (default: on for mode=full, otherwise off) - kasan.fault=report/panic - only report tag fault or also panic (default: report) If kasan.mode parameter is not provided, it defaults to full when CONFIG_DEBUG_KERNEL is enabled, and to prod otherwise. It is essential that switching between these modes doesn't require rebuilding the kernel with different configs, as this is required by the Android GKI (Generic Kernel Image) initiative [1]. [1] https://source.android.com/devices/architecture/kernel/generic-kernel-image [andreyknvl@google.com: don't use read-only static keys] Link: https://lkml.kernel.org/r/f2ded589eba1597f7360a972226083de9afd86e2.1607537948.git.andreyknvl@google.com Link: https://lkml.kernel.org/r/cb093613879d8d8841173f090133eddeb4c35f1f.1606162397.git.andreyknvl@google.com Link: https://linux-review.googlesource.com/id/If7d37003875b2ed3e0935702c8015c223d6416a4 Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Marco Elver <elver@google.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan: inline kasan_reset_tag for tag-based modesAndrey Konovalov1-2/+2
Using kasan_reset_tag() currently results in a function call. As it's called quite often from the allocator code, this leads to a noticeable slowdown. Move it to include/linux/kasan.h and turn it into a static inline function. Also remove the now unneeded reset_tag() internal KASAN macro and use kasan_reset_tag() instead. Link: https://lkml.kernel.org/r/6940383a3a9dfb416134d338d8fac97a9ebb8686.1606162397.git.andreyknvl@google.com Link: https://linux-review.googlesource.com/id/I4d2061acfe91d480a75df00b07c22d8494ef14b5 Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Marco Elver <elver@google.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan: rename get_alloc/free_infoAndrey Konovalov1-6/+6
Rename get_alloc_info() and get_free_info() to kasan_get_alloc_meta() and kasan_get_free_meta() to better reflect what those do and avoid confusion with kasan_set_free_info(). No functional changes. Link: https://lkml.kernel.org/r/27b7c036b754af15a2839e945f6d8bfce32b4c2f.1606162397.git.andreyknvl@google.com Link: https://linux-review.googlesource.com/id/Ib6e4ba61c8b12112b403d3479a9799ac8fff8de1 Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Marco Elver <elver@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan, arm64: print report from tag fault handlerAndrey Konovalov1-3/+8
Add error reporting for hardware tag-based KASAN. When CONFIG_KASAN_HW_TAGS is enabled, print KASAN report from the arm64 tag fault handler. SAS bits aren't set in ESR for all faults reported in EL1, so it's impossible to find out the size of the access the caused the fault. Adapt KASAN reporting code to handle this case. Link: https://lkml.kernel.org/r/b559c82b6a969afedf53b4694b475f0234067a1a.1606161801.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Co-developed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Marco Elver <elver@google.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan: separate metadata_fetch_row for each modeAndrey Konovalov1-29/+27
This is a preparatory commit for the upcoming addition of a new hardware tag-based (MTE-based) KASAN mode. Rework print_memory_metadata() to make it agnostic with regard to the way metadata is stored. Allow providing a separate metadata_fetch_row() implementation for each KASAN mode. Hardware tag-based KASAN will provide its own implementation that doesn't use shadow memory. No functional changes for software modes. Link: https://lkml.kernel.org/r/5fb1ec0152bb1f521505017800387ec3e36ffe18.1606161801.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Marco Elver <elver@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan: rename SHADOW layout macros to METAAndrey Konovalov1-15/+15
This is a preparatory commit for the upcoming addition of a new hardware tag-based (MTE-based) KASAN mode. Hardware tag-based KASAN won't be using shadow memory, but will reuse these macros. Rename "SHADOW" to implementation-neutral "META". No functional changes. Link: https://lkml.kernel.org/r/f96244ec59dc17db35173ec352c5592b14aefaf8.1606161801.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Marco Elver <elver@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan: rename print_shadow_for_address to print_memory_metadataAndrey Konovalov1-3/+3
This is a preparatory commit for the upcoming addition of a new hardware tag-based (MTE-based) KASAN mode. Hardware tag-based KASAN won't be using shadow memory, but will reuse this function. Rename "shadow" to implementation-neutral "metadata". No functional changes. Link: https://lkml.kernel.org/r/dd955c5aadaee16aef451a6189d19172166a23f5.1606161801.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Marco Elver <elver@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan: rename addr_has_shadow to addr_has_metadataAndrey Konovalov1-3/+3
This is a preparatory commit for the upcoming addition of a new hardware tag-based (MTE-based) KASAN mode. Hardware tag-based KASAN won't be using shadow memory, but will reuse this function. Rename "shadow" to implementation-neutral "metadata". No functional changes. Link: https://lkml.kernel.org/r/370466fba590a4596b55ffd38adfd990f8886db4.1606161801.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Marco Elver <elver@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan, arm64: only use kasan_depth for software modesAndrey Konovalov1-0/+2
This is a preparatory commit for the upcoming addition of a new hardware tag-based (MTE-based) KASAN mode. Hardware tag-based KASAN won't use kasan_depth. Only define and use it when one of the software KASAN modes are enabled. No functional changes for software modes. Link: https://lkml.kernel.org/r/e16f15aeda90bc7fb4dfc2e243a14b74cc5c8219.1606161801.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Marco Elver <elver@google.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan: decode stack frame only with KASAN_STACK_ENABLEAndrey Konovalov1-162/+0
Decoding routines aren't needed when CONFIG_KASAN_STACK_ENABLE is not enabled. Currently only generic KASAN mode implements stack error reporting. No functional changes for software modes. Link: https://lkml.kernel.org/r/05a24db36f5ec876af876a299bbea98c29468ebd.1606161801.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Marco Elver <elver@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan: rename report and tags filesAndrey Konovalov1-1/+1
Rename generic_report.c to report_generic.c and tags_report.c to report_sw_tags.c, as their content is more relevant to report.c file. Also rename tags.c to sw_tags.c to better reflect that this file contains code for software tag-based mode. No functional changes. Link: https://lkml.kernel.org/r/a6105d416da97d389580015afed66c4c3cfd4c08.1606161801.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Marco Elver <elver@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan: rename KASAN_SHADOW_* to KASAN_GRANULE_*Andrey Konovalov1-5/+5
This is a preparatory commit for the upcoming addition of a new hardware tag-based (MTE-based) KASAN mode. The new mode won't be using shadow memory, but will still use the concept of memory granules. Each memory granule maps to a single metadata entry: 8 bytes per one shadow byte for generic mode, 16 bytes per one shadow byte for software tag-based mode, and 16 bytes per one allocation tag for hardware tag-based mode. Rename KASAN_SHADOW_SCALE_SIZE to KASAN_GRANULE_SIZE, and KASAN_SHADOW_MASK to KASAN_GRANULE_MASK. Also use MASK when used as a mask, otherwise use SIZE. No functional changes. Link: https://lkml.kernel.org/r/939b5754e47f528a6e6a6f28ffc5815d8d128033.1606161801.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Marco Elver <elver@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan: drop unnecessary GPL text from comment headersAndrey Konovalov1-5/+0
Patch series "kasan: add hardware tag-based mode for arm64", v11. This patchset adds a new hardware tag-based mode to KASAN [1]. The new mode is similar to the existing software tag-based KASAN, but relies on arm64 Memory Tagging Extension (MTE) [2] to perform memory and pointer tagging (instead of shadow memory and compiler instrumentation). This patchset is co-developed and tested by Vincenzo Frascino <vincenzo.frascino@arm.com>. This patchset is available here: https://github.com/xairy/linux/tree/up-kasan-mte-v11 For testing in QEMU hardware tag-based KASAN requires: 1. QEMU built from master [4] (use "-machine virt,mte=on -cpu max" arguments to run). 2. GCC version 10. [1] https://www.kernel.org/doc/html/latest/dev-tools/kasan.html [2] https://community.arm.com/developer/ip-products/processors/b/processors-ip-blog/posts/enhancing-memory-safety [3] git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux for-next/mte [4] https://github.com/qemu/qemu ====== Overview The underlying ideas of the approach used by hardware tag-based KASAN are: 1. By relying on the Top Byte Ignore (TBI) arm64 CPU feature, pointer tags are stored in the top byte of each kernel pointer. 2. With the Memory Tagging Extension (MTE) arm64 CPU feature, memory tags for kernel memory allocations are stored in a dedicated memory not accessible via normal instuctions. 3. On each memory allocation, a random tag is generated, embedded it into the returned pointer, and the corresponding memory is tagged with the same tag value. 4. With MTE the CPU performs a check on each memory access to make sure that the pointer tag matches the memory tag. 5. On a tag mismatch the CPU generates a tag fault, and a KASAN report is printed. Same as other KASAN modes, hardware tag-based KASAN is intended as a debugging feature at this point. ====== Rationale There are two main reasons for this new hardware tag-based mode: 1. Previously implemented software tag-based KASAN is being successfully used on dogfood testing devices due to its low memory overhead (as initially planned). The new hardware mode keeps the same low memory overhead, and is expected to have significantly lower performance impact, due to the tag checks being performed by the hardware. Therefore the new mode can be used as a better alternative in dogfood testing for hardware that supports MTE. 2. The new mode lays the groundwork for the planned in-kernel MTE-based memory corruption mitigation to be used in production. ====== Technical details Considering the implementation perspective, hardware tag-based KASAN is almost identical to the software mode. The key difference is using MTE for assigning and checking tags. Compared to the software mode, the hardware mode uses 4 bits per tag, as dictated by MTE. Pointer tags are stored in bits [56:60), the top 4 bits have the normal value 0xF. Having less distict tags increases the probablity of false negatives (from ~1/256 to ~1/16) in certain cases. Only synchronous exceptions are set up and used by hardware tag-based KASAN. ====== Benchmarks Note: all measurements have been performed with software emulation of Memory Tagging Extension, performance numbers for hardware tag-based KASAN on the actual hardware are expected to be better. Boot time [1]: * 2.8 sec for clean kernel * 5.7 sec for hardware tag-based KASAN * 11.8 sec for software tag-based KASAN * 11.6 sec for generic KASAN Slab memory usage after boot [2]: * 7.0 kb for clean kernel * 9.7 kb for hardware tag-based KASAN * 9.7 kb for software tag-based KASAN * 41.3 kb for generic KASAN Measurements have been performed with: * defconfig-based configs * Manually built QEMU master * QEMU arguments: -machine virt,mte=on -cpu max * CONFIG_KASAN_STACK_ENABLE disabled * CONFIG_KASAN_INLINE enabled * clang-10 as the compiler and gcc-10 as the assembler [1] Time before the ext4 driver is initialized. [2] Measured as `cat /proc/meminfo | grep Slab`. ====== Notes The cover letter for software tag-based KASAN patchset can be found here: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=0116523cfffa62aeb5aa3b85ce7419f3dae0c1b8 ===== Tags Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> This patch (of 41): Don't mention "GNU General Public License version 2" text explicitly, as it's already covered by the SPDX-License-Identifier. Link: https://lkml.kernel.org/r/cover.1606161801.git.andreyknvl@google.com Link: https://lkml.kernel.org/r/6ea9f5f4aa9dbbffa0d0c0a780b37699a4531034.1606161801.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Marco Elver <elver@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15kasan: print workqueue stackWalter Wu1-2/+2
The aux_stack[2] is reused to record the call_rcu() call stack and enqueuing work call stacks. So that we need to change the auxiliary stack title for common title, print them in KASAN report. Link: https://lkml.kernel.org/r/20201203022715.30635-1-walter-zh.wu@mediatek.com Signed-off-by: Walter Wu <walter-zh.wu@mediatek.com> Suggested-by: Marco Elver <elver@google.com> Acked-by: Marco Elver <elver@google.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Andrey Konovalov <andreyknvl@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Lai Jiangshan <jiangshanlai@gmail.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-14mm: kasan: do not panic if both panic_on_warn and kasan_multishot setDavid Gow1-1/+1
KASAN errors will currently trigger a panic when panic_on_warn is set. This renders kasan_multishot useless, as further KASAN errors won't be reported if the kernel has already paniced. By making kasan_multishot disable this behaviour for KASAN errors, we can still have the benefits of panic_on_warn for non-KASAN warnings, yet be able to use kasan_multishot. This is particularly important when running KASAN tests, which need to trigger multiple KASAN errors: previously these would panic the system if panic_on_warn was set, now they can run (and will panic the system should non-KASAN warnings show up). Signed-off-by: David Gow <davidgow@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Patricia Alfonso <trishalfonso@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Shuah Khan <shuah@kernel.org> Cc: Vincent Guittot <vincent.guittot@linaro.org> Link: https://lkml.kernel.org/r/20200915035828.570483-6-davidgow@google.com Link: https://lkml.kernel.org/r/20200910070331.3358048-6-davidgow@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-14KUnit: KASAN IntegrationPatricia Alfonso1-0/+32
Integrate KASAN into KUnit testing framework. - Fail tests when KASAN reports an error that is not expected - Use KUNIT_EXPECT_KASAN_FAIL to expect a KASAN error in KASAN tests - Expected KASAN reports pass tests and are still printed when run without kunit_tool (kunit_tool still bypasses the report due to the test passing) - KUnit struct in current task used to keep track of the current test from KASAN code Make use of "[PATCH v3 kunit-next 1/2] kunit: generalize kunit_resource API beyond allocated resources" and "[PATCH v3 kunit-next 2/2] kunit: add support for named resources" from Alan Maguire [1] - A named resource is added to a test when a KASAN report is expected - This resource contains a struct for kasan_data containing booleans representing if a KASAN report is expected and if a KASAN report is found [1] (https://lore.kernel.org/linux-kselftest/1583251361-12748-1-git-send-email-alan.maguire@oracle.com/T/#t) Signed-off-by: Patricia Alfonso <trishalfonso@google.com> Signed-off-by: David Gow <davidgow@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Acked-by: Brendan Higgins <brendanhiggins@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Shuah Khan <shuah@kernel.org> Cc: Vincent Guittot <vincent.guittot@linaro.org> Link: https://lkml.kernel.org/r/20200915035828.570483-3-davidgow@google.com Link: https://lkml.kernel.org/r/20200910070331.3358048-3-davidgow@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-07kasan: record and print the free trackWalter Wu1-22/+4
Move free track from kasan_alloc_meta to kasan_free_meta in order to make struct kasan_alloc_meta and kasan_free_meta size are both 16 bytes. It is a good size because it is the minimal redzone size and a good number of alignment. For free track, we make some modifications as shown below: 1) Remove the free_track from struct kasan_alloc_meta. 2) Add the free_track into struct kasan_free_meta. 3) Add a macro KASAN_KMALLOC_FREETRACK in order to check whether it can print free stack in KASAN report. [1]https://bugzilla.kernel.org/show_bug.cgi?id=198437 [walter-zh.wu@mediatek.com: build fix] Link: http://lkml.kernel.org/r/20200710162440.23887-1-walter-zh.wu@mediatek.com Suggested-by: Dmitry Vyukov <dvyukov@google.com> Co-developed-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Walter Wu <walter-zh.wu@mediatek.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Andrey Konovalov <andreyknvl@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Lai Jiangshan <jiangshanlai@gmail.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: "Paul E . McKenney" <paulmck@kernel.org> Link: http://lkml.kernel.org/r/20200601051022.1230-1-walter-zh.wu@mediatek.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-07rcu: kasan: record and print call_rcu() call stackWalter Wu1-5/+23
Patch series "kasan: memorize and print call_rcu stack", v8. This patchset improves KASAN reports by making them to have call_rcu() call stack information. It is useful for programmers to solve use-after-free or double-free memory issue. The KASAN report was as follows(cleaned up slightly): BUG: KASAN: use-after-free in kasan_rcu_reclaim+0x58/0x60 Freed by task 0: kasan_save_stack+0x24/0x50 kasan_set_track+0x24/0x38 kasan_set_free_info+0x18/0x20 __kasan_slab_free+0x10c/0x170 kasan_slab_free+0x10/0x18 kfree+0x98/0x270 kasan_rcu_reclaim+0x1c/0x60 Last call_rcu(): kasan_save_stack+0x24/0x50 kasan_record_aux_stack+0xbc/0xd0 call_rcu+0x8c/0x580 kasan_rcu_uaf+0xf4/0xf8 Generic KASAN will record the last two call_rcu() call stacks and print up to 2 call_rcu() call stacks in KASAN report. it is only suitable for generic KASAN. This feature considers the size of struct kasan_alloc_meta and kasan_free_meta, we try to optimize the structure layout and size, lets it get better memory consumption. [1]https://bugzilla.kernel.org/show_bug.cgi?id=198437 [2]https://groups.google.com/forum/#!searchin/kasan-dev/better$20stack$20traces$20for$20rcu%7Csort:date/kasan-dev/KQsjT_88hDE/7rNUZprRBgAJ This patch (of 4): This feature will record the last two call_rcu() call stacks and prints up to 2 call_rcu() call stacks in KASAN report. When call_rcu() is called, we store the call_rcu() call stack into slub alloc meta-data, so that the KASAN report can print rcu stack. [1]https://bugzilla.kernel.org/show_bug.cgi?id=198437 [2]https://groups.google.com/forum/#!searchin/kasan-dev/better$20stack$20traces$20for$20rcu%7Csort:date/kasan-dev/KQsjT_88hDE/7rNUZprRBgAJ [walter-zh.wu@mediatek.com: build fix] Link: http://lkml.kernel.org/r/20200710162401.23816-1-walter-zh.wu@mediatek.com Suggested-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Walter Wu <walter-zh.wu@mediatek.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Andrey Konovalov <andreyknvl@google.com> Acked-by: Paul E. McKenney <paulmck@kernel.org> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Lai Jiangshan <jiangshanlai@gmail.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthias Brugger <matthias.bgg@gmail.com> Link: http://lkml.kernel.org/r/20200710162123.23713-1-walter-zh.wu@mediatek.com Link: http://lkml.kernel.org/r/20200601050847.1096-1-walter-zh.wu@mediatek.com Link: http://lkml.kernel.org/r/20200601050927.1153-1-walter-zh.wu@mediatek.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-02kasan: move kasan_report() into report.cAndrey Konovalov1-2/+20
The kasan_report() functions belongs to report.c, as it's a common functions that does error reporting. Reported-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Leon Romanovsky <leon@kernel.org> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Leon Romanovsky <leonro@mellanox.com> Link: http://lkml.kernel.org/r/78a81fde6eeda9db72a7fd55fbc33173a515e4b1.1589297433.git.andreyknvl@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-08 20:07:11 +0300