summaryrefslogtreecommitdiff
path: root/mm/memblock.c
AgeCommit message (Collapse)AuthorFilesLines
2016-08-05mm/memblock.c: fix NULL dereference errorzijun_hu1-1/+4
It causes NULL dereference error and failure to get type_a->regions[0] info if parameter type_b of __next_mem_range_rev() == NULL Fix this by checking before dereferring and initializing idx_b to 0 The approach is tested by dumping all types of region via __memblock_dump_all() and __next_mem_range_rev() fixed to UART separately the result is okay after checking the logs. Link: http://lkml.kernel.org/r/57A0320D.6070102@zoho.com Signed-off-by: zijun_hu <zijun_hu@htc.com> Tested-by: zijun_hu <zijun_hu@htc.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-05mm/memblock: fix a typo in a commentAlexander Kuleshov1-2/+2
s/accomodate/accommodate/ Link: http://lkml.kernel.org/r/20160804121824.18100-1-kuleshovmail@gmail.com Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29mm/memblock.c: fix index adjustment error in __next_mem_range_rev()zijun_hu1-1/+1
Fix region index adjustment error when parameter type_b of __next_mem_range_rev() == NULL. Signed-off-by: zijun_hu <zijun_hu@htc.com> Cc: Alexander Kuleshov <kuleshovmail@gmail.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Wei Yang <weiyang@linux.vnet.ibm.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Richard Leitner <dev@g0hl1n.net> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29mm/memblock.c: add new infrastructure to address the mem limit issueDennis Chen1-5/+52
In some cases, memblock is queried by kernel to determine whether a specified address is RAM or not. For example, the ACPI core needs this information to determine which attributes to use when mapping ACPI regions(acpi_os_ioremap). Use of incorrect memory types can result in faults, data corruption, or other issues. Removing memory with memblock_enforce_memory_limit() throws away this information, and so a kernel booted with 'mem=' may suffer from the issues described above. To avoid this, we need to keep those NOMAP regions instead of removing all above the limit, which preserves the information we need while preventing other use of those regions. This patch adds new infrastructure to retain all NOMAP memblock regions while removing others, to cater for this. Link: http://lkml.kernel.org/r/1468475036-5852-2-git-send-email-dennis.chen@arm.com Signed-off-by: Dennis Chen <dennis.chen@arm.com> Acked-by: Steve Capper <steve.capper@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Rafael J. Wysocki <rafael@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Kaly Xin <kaly.xin@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29memblock: include <asm/sections.h> instead of <asm-generic/sections.h>Christoph Hellwig1-1/+1
asm-generic headers are generic implementations for architecture specific code and should not be included by common code. Thus use the asm/ version of sections.h to get at the linker sections. Link: http://lkml.kernel.org/r/1468285103-7470-1-git-send-email-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27mm/memblock.c:memblock_add_range(): if nr_new is 0 just returnnimisolo1-0/+3
If nr_new is 0 which means there's no region would be added, so just return to the caller. Signed-off-by: nimisolo <nimisolo@gmail.com> Cc: Alexander Kuleshov <kuleshovmail@gmail.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-21mm/memblock.c: remove unnecessary always-true comparisonRichard Leitner1-1/+1
Comparing an u64 variable to >= 0 returns always true and can therefore be removed. This issue was detected using the -Wtype-limits gcc flag. This patch fixes following type-limits warning: mm/memblock.c: In function `__next_reserved_mem_region': mm/memblock.c:843:11: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits] if (*idx >= 0 && *idx < type->cnt) { Link: http://lkml.kernel.org/r/20160510103625.3a7f8f32@g0hl1n.net Signed-off-by: Richard Leitner <dev@g0hl1n.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-21mm/memblock.c: move memblock_{add,reserve}_region into memblock_{add,reserve}Alexander Kuleshov1-22/+6
memblock_add_region() and memblock_reserve_region() do nothing specific before the call of memblock_add_range(), only print debug output. We can do the same in memblock_add() and memblock_reserve() since both memblock_add_region() and memblock_reserve_region() are not used by anybody outside of memblock.c and memblock_{add,reserve}() have the same set of flags and nids. Since memblock_add_region() and memblock_reserve_region() will be inlined, there will not be functional changes, but will improve code readability a little. Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Pekka Enberg <penberg@kernel.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-18mm: coalesce split stringsJoe Perches1-2/+1
Kernel style prefers a single string over split strings when the string is 'user-visible'. Miscellanea: - Add a missing newline - Realign arguments Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Tejun Heo <tj@kernel.org> [percpu] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-16mm/memblock.c: remove unnecessary memblock_type variableAlexander Kuleshov1-6/+2
We define struct memblock_type *type in the memblock_add_region() and memblock_reserve_region() functions only for passing it to the memlock_add_range() and memblock_reserve_range() functions. Let's remove these variables and will pass a type directly. Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-02-06memblock: don't mark memblock_phys_mem_size() as __initDavid Gibson1-1/+1
At the moment memblock_phys_mem_size() is marked as __init, and so is discarded after boot. This is different from most of the memblock functions which are marked __init_memblock, and are only discarded after boot if memory hotplug is not configured. To allow for upcoming code which will need memblock_phys_mem_size() in the hotplug path, change it from __init to __init_memblock. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-15mm/memblock: introduce for_each_memblock_type()Alexander Kuleshov1-16/+16
We already have the for_each_memblock() macro in <linux/memblock.h> which provides ability to iterate over memblock regions of a known type. The for_each_memblock() macro allows us to pass the pointer to the struct memblock_type, instead we need to pass name of the type. This patch introduces a new macro for_each_memblock_type() which allows us iterate over memblock regions with the given type when the type is unknown. Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-15mm/memblock: remove rgnbase and rgnsize variablesAlexander Kuleshov1-6/+3
Remove rgnbase and rgnsize variables from memblock_overlaps_region(). We use these variables only for passing to the memblock_addrs_overlap() function and that's all. Let's remove them. Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-15mm/memblock.c: memblock_is_memory()/reserved() can be booleanYaowei Bai1-2/+2
Make memblock_is_memory() and memblock_is_reserved return bool to improve readability due to these particular functions only using either one or zero as their return value. No functional change. Signed-off-by: Yaowei Bai <baiyaowei@cmss.chinamobile.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-12-09mm/memblock: add MEMBLOCK_NOMAP attribute to memblock memory tableArd Biesheuvel1-0/+28
This introduces the MEMBLOCK_NOMAP attribute and the required plumbing to make it usable as an indicator that some parts of normal memory should not be covered by the kernel direct mapping. It is up to the arch to actually honor the attribute when laying out this mapping, but the memblock code itself is modified to disregard these regions for allocations and other general use. Cc: linux-mm@kvack.org Cc: Alexander Kuleshov <kuleshovmail@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-11-06mm/memblock: make memblock_remove_range() staticAlexander Kuleshov1-1/+1
memblock_remove_range() is only used in the mm/memblock.c, so we can make it static. Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-09mm/memblock.c: fix comment in __next_mem_range()Alexander Kuleshov1-1/+1
Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-09mm/memblock.c: fiy typos in commentsAlexander Kuleshov1-4/+4
s/succees/success/ Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-09mm/memblock.c: rename local variable of memblock_type to 'type'Alexander Kuleshov1-5/+5
Since commit e3239ff92a17 ("memblock: Rename memblock_region to memblock_type and memblock_property to memblock_region"), all local variables of the membock_type type were renamed to 'type'. This commit renames all remaining local variables with the memblock_type type to the same view. Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-09mem-hotplug: handle node hole when initializing numa_meminfo.Tang Chen1-1/+1
When parsing SRAT, all memory ranges are added into numa_meminfo. In numa_init(), before entering numa_cleanup_meminfo(), all possible memory ranges are in numa_meminfo. And numa_cleanup_meminfo() removes all ranges over max_pfn or empty. But, this only works if the nodes are continuous. Let's have a look at the following example: We have an SRAT like this: SRAT: Node 0 PXM 0 [mem 0x00000000-0x5fffffff] SRAT: Node 0 PXM 0 [mem 0x100000000-0x1ffffffffff] SRAT: Node 1 PXM 1 [mem 0x20000000000-0x3ffffffffff] SRAT: Node 4 PXM 2 [mem 0x40000000000-0x5ffffffffff] hotplug SRAT: Node 5 PXM 3 [mem 0x60000000000-0x7ffffffffff] hotplug SRAT: Node 2 PXM 4 [mem 0x80000000000-0x9ffffffffff] hotplug SRAT: Node 3 PXM 5 [mem 0xa0000000000-0xbffffffffff] hotplug SRAT: Node 6 PXM 6 [mem 0xc0000000000-0xdffffffffff] hotplug SRAT: Node 7 PXM 7 [mem 0xe0000000000-0xfffffffffff] hotplug On boot, only node 0,1,2,3 exist. And the numa_meminfo will look like this: numa_meminfo.nr_blks = 9 1. on node 0: [0, 60000000] 2. on node 0: [100000000, 20000000000] 3. on node 1: [20000000000, 40000000000] 4. on node 4: [40000000000, 60000000000] 5. on node 5: [60000000000, 80000000000] 6. on node 2: [80000000000, a0000000000] 7. on node 3: [a0000000000, a0800000000] 8. on node 6: [c0000000000, a0800000000] 9. on node 7: [e0000000000, a0800000000] And numa_cleanup_meminfo() will merge 1 and 2, and remove 8,9 because the end address is over max_pfn, which is a0800000000. But 4 and 5 are not removed because their end addresses are less then max_pfn. But in fact, node 4 and 5 don't exist. In a word, numa_cleanup_meminfo() is not able to handle holes between nodes. Since memory ranges in node 4 and 5 are in numa_meminfo, in numa_register_memblks(), node 4 and 5 will be mistakenly set to online. If you run lscpu, it will show: NUMA node0 CPU(s): 0-14,128-142 NUMA node1 CPU(s): 15-29,143-157 NUMA node2 CPU(s): NUMA node3 CPU(s): NUMA node4 CPU(s): 62-76,190-204 NUMA node5 CPU(s): 78-92,206-220 In this patch, we use memblock_overlaps_region() to check if ranges in numa_meminfo overlap with ranges in memory_block. Since memory_block contains all available memory at boot time, if they overlap, it means the ranges exist. If not, then remove them from numa_meminfo. After this patch, lscpu will show: NUMA node0 CPU(s): 0-14,128-142 NUMA node1 CPU(s): 15-29,143-157 NUMA node4 CPU(s): 62-76,190-204 NUMA node5 CPU(s): 78-92,206-220 Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tejun Heo <tj@kernel.org> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Vladimir Murzin <vladimir.murzin@arm.com> Cc: Fabian Frederick <fabf@skynet.be> Cc: Alexander Kuleshov <kuleshovmail@gmail.com> Cc: Baoquan He <bhe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-09mm/memblock.c: make memblock_overlaps_region() return bool.Tang Chen1-5/+5
memblock_overlaps_region() checks if the given memblock region intersects a region in memblock. If so, it returns the index of the intersected region. But its only caller is memblock_is_region_reserved(), and it returns 0 if false, non-zero if true. Both of these should return bool. Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tejun Heo <tj@kernel.org> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Vladimir Murzin <vladimir.murzin@arm.com> Cc: Fabian Frederick <fabf@skynet.be> Cc: Alexander Kuleshov <kuleshovmail@gmail.com> Cc: Baoquan He <bhe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-09mm/memblock.c: WARN_ON when flags differs from overlap regionWei Yang1-0/+1
Each memblock_region has flags to indicates the type of this range. For the overlap case, memblock_add_range() inserts the lower part and leave the upper part as indicated in the overlapped region. If the flags of the new range differs from the overlapped region, the information recorded is not correct. This patch adds a WARN_ON when the flags of the new range differs from the overlapped region. Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-05mm/memblock: WARN_ON when nid differs from overlap regionWei Yang1-0/+3
Each memblock_region has nid to indicates the Node ID of this range. For the overlap case, memblock_add_range() inserts the lower part and leave the upper part as indicated in the overlapped region. If the nid of the new range differs from the overlapped region, the information recorded is not correct. This patch adds a WARN_ON when the nid of the new range differs from the overlapped region. Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-01mm: page_alloc: pass PFN to __free_pages_bootmemMel Gorman1-1/+1
__free_pages_bootmem prepares a page for release to the buddy allocator and assumes that the struct page is initialised. Parallel initialisation of struct pages defers initialisation and __free_pages_bootmem can be called for struct pages that cannot yet map struct page to PFN. This patch passes PFN to __free_pages_bootmem with no other functional change. Signed-off-by: Mel Gorman <mgorman@suse.de> Tested-by: Nate Zimmer <nzimmer@sgi.com> Tested-by: Waiman Long <waiman.long@hp.com> Tested-by: Daniel J Blueman <daniel@numascale.com> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: Robin Holt <robinmholt@gmail.com> Cc: Nate Zimmer <nzimmer@sgi.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Waiman Long <waiman.long@hp.com> Cc: Scott Norton <scott.norton@hp.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-01memblock: introduce a for_each_reserved_mem_region iteratorRobin Holt1-0/+32
Struct page initialisation had been identified as one of the reasons why large machines take a long time to boot. Patches were posted a long time ago to defer initialisation until they were first used. This was rejected on the grounds it should not be necessary to hurt the fast paths. This series reuses much of the work from that time but defers the initialisation of memory to kswapd so that one thread per node initialises memory local to that node. After applying the series and setting the appropriate Kconfig variable I see this in the boot log on a 64G machine [ 7.383764] kswapd 0 initialised deferred memory in 188ms [ 7.404253] kswapd 1 initialised deferred memory in 208ms [ 7.411044] kswapd 3 initialised deferred memory in 216ms [ 7.411551] kswapd 2 initialised deferred memory in 216ms On a 1TB machine, I see [ 8.406511] kswapd 3 initialised deferred memory in 1116ms [ 8.428518] kswapd 1 initialised deferred memory in 1140ms [ 8.435977] kswapd 0 initialised deferred memory in 1148ms [ 8.437416] kswapd 2 initialised deferred memory in 1148ms Once booted the machine appears to work as normal. Boot times were measured from the time shutdown was called until ssh was available again. In the 64G case, the boot time savings are negligible. On the 1TB machine, the savings were 16 seconds. Nate Zimmer said: : On an older 8 TB box with lots and lots of cpus the boot time, as : measure from grub to login prompt, the boot time improved from 1484 : seconds to exactly 1000 seconds. Waiman Long said: : I ran a bootup timing test on a 12-TB 16-socket IvyBridge-EX system. From : grub menu to ssh login, the bootup time was 453s before the patch and 265s : after the patch - a saving of 188s (42%). Daniel Blueman said: : On a 7TB, 1728-core NumaConnect system with 108 NUMA nodes, we're seeing : stock 4.0 boot in 7136s. This drops to 2159s, or a 70% reduction with : this patchset. Non-temporal PMD init (https://lkml.org/lkml/2015/4/23/350) : drops this to 1045s. This patch (of 13): As part of initializing struct page's in 2MiB chunks, we noticed that at the end of free_all_bootmem(), there was nothing which had forced the reserved/allocated 4KiB pages to be initialized. This helper function will be used for that expansion. Signed-off-by: Robin Holt <holt@sgi.com> Signed-off-by: Nate Zimmer <nzimmer@sgi.com> Signed-off-by: Mel Gorman <mgorman@suse.de> Tested-by: Nate Zimmer <nzimmer@sgi.com> Tested-by: Waiman Long <waiman.long@hp.com> Tested-by: Daniel J Blueman <daniel@numascale.com> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: Robin Holt <robinmholt@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Waiman Long <waiman.long@hp.com> Cc: Scott Norton <scott.norton@hp.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25mm/memblock: allocate boot time data structures from mirrored memoryTony Luck1-11/+67
Try to allocate all boot time kernel data structures from mirrored memory. If we run out of mirrored memory print warnings, but fall back to using non-mirrored memory to make sure that we still boot. By number of bytes, most of what we allocate at boot time is the page structures. 64 bytes per 4K page on x86_64 ... or about 1.5% of total system memory. For workloads where the bulk of memory is allocated to applications this may represent a useful improvement to system availability since 1.5% of total memory might be a third of the memory allocated to the kernel. Signed-off-by: Tony Luck <tony.luck@intel.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Xiexiuqi <xiexiuqi@huawei.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25mm/memblock: add extra "flags" to memblock to allow selection of memory ↵Tony Luck1-20/+35
based on attribute Some high end Intel Xeon systems report uncorrectable memory errors as a recoverable machine check. Linux has included code for some time to process these and just signal the affected processes (or even recover completely if the error was in a read only page that can be replaced by reading from disk). But we have no recovery path for errors encountered during kernel code execution. Except for some very specific cases were are unlikely to ever be able to recover. Enter memory mirroring. Actually 3rd generation of memory mirroing. Gen1: All memory is mirrored Pro: No s/w enabling - h/w just gets good data from other side of the mirror Con: Halves effective memory capacity available to OS/applications Gen2: Partial memory mirror - just mirror memory begind some memory controllers Pro: Keep more of the capacity Con: Nightmare to enable. Have to choose between allocating from mirrored memory for safety vs. NUMA local memory for performance Gen3: Address range partial memory mirror - some mirror on each memory controller Pro: Can tune the amount of mirror and keep NUMA performance Con: I have to write memory management code to implement The current plan is just to use mirrored memory for kernel allocations. This has been broken into two phases: 1) This patch series - find the mirrored memory, use it for boot time allocations 2) Wade into mm/page_alloc.c and define a ZONE_MIRROR to pick up the unused mirrored memory from mm/memblock.c and only give it out to select kernel allocations (this is still being scoped because page_alloc.c is scary). This patch (of 3): Add extra "flags" to memblock to allow selection of memory based on attribute. No functional changes Signed-off-by: Tony Luck <tony.luck@intel.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Xiexiuqi <xiexiuqi@huawei.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-16mm/memblock.c: add debug output for memblock_add()Alexander Kuleshov1-2/+16
memblock_reserve() calls memblock_reserve_region() which prints debugging information if 'memblock=debug' was passed on the command line. This patch adds the same behaviour, but for memblock_add function(). [akpm@linux-foundation.org: s/memblock_memory/memblock_add/ in message] Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Philipp Hachtmann <phacht@linux.vnet.ibm.com> Cc: Fabian Frederick <fabf@skynet.be> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Emil Medve <Emilian.Medve@freescale.com> Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15mm/memblock.c: rename local variable of memblock_type to `type'Baoquan He1-2/+2
A small cleanup. Seems in e3239ff9 ("memblock: Rename memblock_region to memblock_type and memblock_property to memblock_region") this one was missed. Signed-off-by: Baoquan He <bhe@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13mm/memblock.c: refactor functions to set/clear MEMBLOCK_HOTPLUGTony Luck1-23/+20
There is a lot of duplication in the rubric around actually setting or clearing a mem region flag. Create a new helper function to do this and reduce each of memblock_mark_hotplug() and memblock_clear_hotplug() to a single line. This will be useful if someone were to add a new mem region flag - which I hope to be doing some day soon. But it looks like a plausible cleanup even without that - so I'd like to get it out of the way now. Signed-off-by: Tony Luck <tony.luck@intel.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: Philipp Hachtmann <phacht@linux.vnet.ibm.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Emil Medve <Emilian.Medve@freescale.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-09-11mem-hotplug: let memblock skip the hotpluggable memory regions in ↵Xishi Qiu1-0/+4
__next_mem_range() Let memblock skip the hotpluggable memory regions in __next_mem_range(), it is used to to prevent memblock from allocating hotpluggable memory for the kernel at early time. The code is the same as __next_mem_range_rev(). Clear hotpluggable flag before releasing free pages to the buddy allocator. If we don't clear hotpluggable flag in free_low_memory_core_early(), the memory which marked hotpluggable flag will not free to buddy allocator. Because __next_mem_range() will skip them. free_low_memory_core_early for_each_free_mem_range for_each_mem_range __next_mem_range [akpm@linux-foundation.org: fix warning] Signed-off-by: Xishi Qiu <qiuxishi@huawei.com> Cc: Tejun Heo <tj@kernel.org> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-30memblock, memhotplug: fix wrong type in memblock_find_in_range_node().Tang Chen1-2/+1
In memblock_find_in_range_node(), we defined ret as int. But it should be phys_addr_t because it is used to store the return value from __memblock_find_range_bottom_up(). The bug has not been triggered because when allocating low memory near the kernel end, the "int ret" won't turn out to be negative. When we started to allocate memory on other nodes, and the "int ret" could be minus. Then the kernel will panic. A simple way to reproduce this: comment out the following code in numa_init(), memblock_set_bottom_up(false); and the kernel won't boot. Reported-by: Xishi Qiu <qiuxishi@huawei.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Tested-by: Xishi Qiu <qiuxishi@huawei.com> Cc: <stable@vger.kernel.org> [3.13+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-07mm/memblock.c: call kmemleak directly from memblock_(alloc|free)Catalin Marinas1-2/+8
Kmemleak could ignore memory blocks allocated via memblock_alloc() leading to false positives during scanning. This patch adds the corresponding callbacks and removes kmemleak_free_* calls in mm/nobootmem.c to avoid duplication. The kmemleak_alloc() in mm/nobootmem.c is kept since __alloc_memory_core_early() does not use memblock_alloc() directly. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-05mm/memblock.c: use PFN_DOWNFabian Frederick1-3/+2
Replace ((x) >> PAGE_SHIFT) with the pfn macro. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-05memblock: introduce memblock_alloc_range()Akinobu Mita1-4/+17
This introduces memblock_alloc_range() which allocates memblock from the specified range of physical address. I would like to use this function to specify the location of CMA. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Don Dutile <ddutile@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-05-20mm/memblock: add physical memory listPhilipp Hachtmann1-0/+12
Add the physmem list to the memblock structure. This list only exists if HAVE_MEMBLOCK_PHYS_MAP is selected and contains the unmodified list of physically available memory. It differs from the memblock memory list as it always contains all memory ranges even if the memory has been restricted, e.g. by use of the mem= kernel parameter. Signed-off-by: Philipp Hachtmann <phacht@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-05-20mm/memblock: Do some refactoring, enhance APIPhilipp Hachtmann1-71/+122
Refactor the memblock code and extend the memblock API to make it more flexible. With the extended API it is simple to define and work with additional memory lists. The static functions memblock_add_region and __memblock_remove are renamed to memblock_add_range and meblock_remove_range and added to the memblock API. The __next_free_mem_range and __next_free_mem_range_rev functions are replaced with calls to the more generic list walkers __next_mem_range and __next_mem_range_rev. To walk an arbitrary memory list two new macros for_each_mem_range and for_each_mem_range_rev are added. These new macros are used to define for_each_free_mem_range and for_each_free_mem_range_reverse. Signed-off-by: Philipp Hachtmann <phacht@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-08mm/memblock.c: use PFN_PHYS()Fabian Frederick1-2/+2
Replace ((phys_addr_t)(x) << PAGE_SHIFT) by pfn macro. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-08memblock: use for_each_memblock()Emil Medve1-13/+11
This is a small cleanup. Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-03-12ARM: 7993/1: mm/memblock: add memblock_get_current_limitLaura Abbott1-0/+5
Apart from setting the limit of memblock, it's also useful to be able to get the limit to avoid recalculating it every time. Add the function to do so. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Laura Abbott <lauraa@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-01-30memblock: add limit checking to memblock_virt_allocYinghai Lu1-0/+3
In original bootmem wrapper for memblock, we have limit checking. Add it to memblock_virt_alloc, to address arm and x86 booting crash. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Reported-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Reported-by: Olof Johansson <olof@lixom.net> Tested-by: Olof Johansson <olof@lixom.net> Reported-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: "Strashko, Grygorii" <grygorii.strashko@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-28memblock: don't silently align size in memblock_virt_alloc()Yinghai Lu1-6/+0
In original __alloc_memory_core_early() for bootmem wrapper, we do not align size silently. We should not do that, as later free with old size will leave some range not freed. It's obvious that code is copied from memblock_base_nid(), and that code is wrong for the same reason. Also remove that in memblock_alloc_base. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-24mm/nobootmem: free_all_bootmem againPhilipp Hachtmann1-15/+2
get_allocated_memblock_reserved_regions_info() should work if it is compiled in. Extended the ifdef around get_allocated_memblock_memory_regions_info() to include get_allocated_memblock_reserved_regions_info() as well. Similar changes in nobootmem.c/free_low_memory_core_early() where the two functions are called. [akpm@linux-foundation.org: cleanup] Signed-off-by: Philipp Hachtmann <phacht@linux.vnet.ibm.com> Cc: qiuxishi <qiuxishi@huawei.com> Cc: David Howells <dhowells@redhat.com> Cc: Daeseok Youn <daeseok.youn@gmail.com> Cc: Jiang Liu <liuj97@gmail.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-24mm: free memblock.memory in free_all_bootmemPhilipp Hachtmann1-0/+16
When calling free_all_bootmem() the free areas under memblock's control are released to the buddy allocator. Additionally the reserved list is freed if it was reallocated by memblock. The same should apply for the memory list. Signed-off-by: Philipp Hachtmann <phacht@linux.vnet.ibm.com> Reviewed-by: Tejun Heo <tj@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-22mm/memblock: use WARN_ONCE when MAX_NUMNODES passed as input parameterGrygorii Strashko1-13/+8
Check nid parameter and produce warning if it has deprecated MAX_NUMNODES value. Also re-assign NUMA_NO_NODE value to the nid parameter in this case. These will help to identify the wrong API usage (the caller) and make code simpler. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-22mm/memblock: add memblock memory allocation apisSantosh Shilimkar1-2/+207
Introduce memblock memory allocation APIs which allow to support PAE or LPAE extension on 32 bits archs where the physical memory start address can be beyond 4GB. In such cases, existing bootmem APIs which operate on 32 bit addresses won't work and needs memblock layer which operates on 64 bit addresses. So we add equivalent APIs so that we can replace usage of bootmem with memblock interfaces. Architectures already converted to NO_BOOTMEM use these new memblock interfaces. The architectures which are still not converted to NO_BOOTMEM continue to function as is because we still maintain the fal lback option of bootmem back-end supporting these new interfaces. So no functional change as such. In long run, once all the architectures moves to NO_BOOTMEM, we can get rid of bootmem layer completely. This is one step to remove the core code dependency with bootmem and also gives path for architectures to move away from bootmem. The proposed interface will became active if both CONFIG_HAVE_MEMBLOCK and CONFIG_NO_BOOTMEM are specified by arch. In case !CONFIG_NO_BOOTMEM, the memblock() wrappers will fallback to the existing bootmem apis so that arch's not converted to NO_BOOTMEM continue to work as is. The meaning of MEMBLOCK_ALLOC_ACCESSIBLE and MEMBLOCK_ALLOC_ANYWHERE is kept same. [akpm@linux-foundation.org: s/depricated/deprecated/] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Paul Walmsley <paul@pwsan.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-22mm/memblock: switch to use NUMA_NO_NODE instead of MAX_NUMNODESGrygorii Strashko1-9/+19
It's recommended to use NUMA_NO_NODE everywhere to select "process any node" behavior or to indicate that "no node id specified". Hence, update __next_free_mem_range*() API's to accept both NUMA_NO_NODE and MAX_NUMNODES, but emit warning once on MAX_NUMNODES, and correct corresponding API's documentation to describe new behavior. Also, update other memblock/nobootmem APIs where MAX_NUMNODES is used dirrectly. The change was suggested by Tejun Heo. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Paul Walmsley <paul@pwsan.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-22mm/memblock: reorder parameters of memblock_find_in_range_nodeGrygorii Strashko1-8/+8
Reorder parameters of memblock_find_in_range_node to be consistent with other memblock APIs. The change was suggested by Tejun Heo <tj@kernel.org>. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Paul Walmsley <paul@pwsan.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-22mm/memblock: drop WARN and use SMP_CACHE_BYTES as a default alignmentGrygorii Strashko1-2/+2
Don't produce warning and interpret 0 as "default align" equal to SMP_CACHE_BYTES in case if caller of memblock_alloc_base_nid() doesn't specify alignment for the block (align == 0). This is done in preparation of introducing common memblock alloc interface to make code behavior consistent. More details are in below thread : https://lkml.org/lkml/2013/10/13/117. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Paul Walmsley <paul@pwsan.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-22mm/memblock: debug: don't free reserved array if !ARCH_DISCARD_MEMBLOCKGrygorii Strashko1-0/+13
Now the Nobootmem allocator will always try to free memory allocated for reserved memory regions (free_low_memory_core_early()) without taking into to account current memblock debugging configuration (CONFIG_ARCH_DISCARD_MEMBLOCK and CONFIG_DEBUG_FS state). As result if: - CONFIG_DEBUG_FS defined - CONFIG_ARCH_DISCARD_MEMBLOCK not defined; - reserved memory regions array have been resized during boot then: - memory allocated for reserved memory regions array will be freed to buddy allocator; - debug_fs entry "sys/kernel/debug/memblock/reserved" will show garbage instead of state of memory reservations. like: 0: 0x98393bc0..0x9a393bbf 1: 0xff120000..0xff11ffff 2: 0x00000000..0xffffffff Hence, do not free memory allocated for reserved memory regions if defined(CONFIG_DEBUG_FS) && !defined(CONFIG_ARCH_DISCARD_MEMBLOCK). Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Tejun Heo <tj@kernel.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Paul Walmsley <paul@pwsan.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>