| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Large effort by Eric to lower rtnl_lock pressure and remove locks:
- Make commonly used parts of rtnetlink (address, route dumps
etc) lockless, protected by RCU instead of rtnl_lock.
- Add a netns exit callback which already holds rtnl_lock,
allowing netns exit to take rtnl_lock once in the core instead
of once for each driver / callback.
- Remove locks / serialization in the socket diag interface.
- Remove 6 calls to synchronize_rcu() while holding rtnl_lock.
- Remove the dev_base_lock, depend on RCU where necessary.
- Support busy polling on a per-epoll context basis. Poll length and
budget parameters can be set independently of system defaults.
- Introduce struct net_hotdata, to make sure read-mostly global
config variables fit in as few cache lines as possible.
- Add optional per-nexthop statistics to ease monitoring / debug of
ECMP imbalance problems.
- Support TCP_NOTSENT_LOWAT in MPTCP.
- Ensure that IPv6 temporary addresses' preferred lifetimes are long
enough, compared to other configured lifetimes, and at least 2 sec.
- Support forwarding of ICMP Error messages in IPSec, per RFC 4301.
- Add support for the independent control state machine for bonding
per IEEE 802.1AX-2008 5.4.15 in addition to the existing coupled
control state machine.
- Add "network ID" to MCTP socket APIs to support hosts with multiple
disjoint MCTP networks.
- Re-use the mono_delivery_time skbuff bit for packets which user
space wants to be sent at a specified time. Maintain the timing
information while traversing veth links, bridge etc.
- Take advantage of MSG_SPLICE_PAGES for RxRPC DATA and ACK packets.
- Simplify many places iterating over netdevs by using an xarray
instead of a hash table walk (hash table remains in place, for use
on fastpaths).
- Speed up scanning for expired routes by keeping a dedicated list.
- Speed up "generic" XDP by trying harder to avoid large allocations.
- Support attaching arbitrary metadata to netconsole messages.
Things we sprinkled into general kernel code:
- Enforce VM_IOREMAP flag and range in ioremap_page_range and
introduce VM_SPARSE kind and vm_area_[un]map_pages (used by
bpf_arena).
- Rework selftest harness to enable the use of the full range of ksft
exit code (pass, fail, skip, xfail, xpass).
Netfilter:
- Allow userspace to define a table that is exclusively owned by a
daemon (via netlink socket aliveness) without auto-removing this
table when the userspace program exits. Such table gets marked as
orphaned and a restarting management daemon can re-attach/regain
ownership.
- Speed up element insertions to nftables' concatenated-ranges set
type. Compact a few related data structures.
BPF:
- Add BPF token support for delegating a subset of BPF subsystem
functionality from privileged system-wide daemons such as systemd
through special mount options for userns-bound BPF fs to a trusted
& unprivileged application.
- Introduce bpf_arena which is sparse shared memory region between
BPF program and user space where structures inside the arena can
have pointers to other areas of the arena, and pointers work
seamlessly for both user-space programs and BPF programs.
- Introduce may_goto instruction that is a contract between the
verifier and the program. The verifier allows the program to loop
assuming it's behaving well, but reserves the right to terminate
it.
- Extend the BPF verifier to enable static subprog calls in spin lock
critical sections.
- Support registration of struct_ops types from modules which helps
projects like fuse-bpf that seeks to implement a new struct_ops
type.
- Add support for retrieval of cookies for perf/kprobe multi links.
- Support arbitrary TCP SYN cookie generation / validation in the TC
layer with BPF to allow creating SYN flood handling in BPF
firewalls.
- Add code generation to inline the bpf_kptr_xchg() helper which
improves performance when stashing/popping the allocated BPF
objects.
Wireless:
- Add SPP (signaling and payload protected) AMSDU support.
- Support wider bandwidth OFDMA, as required for EHT operation.
Driver API:
- Major overhaul of the Energy Efficient Ethernet internals to
support new link modes (2.5GE, 5GE), share more code between
drivers (especially those using phylib), and encourage more
uniform behavior. Convert and clean up drivers.
- Define an API for querying per netdev queue statistics from
drivers.
- IPSec: account in global stats for fully offloaded sessions.
- Create a concept of Ethernet PHY Packages at the Device Tree level,
to allow parameterizing the existing PHY package code.
- Enable Rx hashing (RSS) on GTP protocol fields.
Misc:
- Improvements and refactoring all over networking selftests.
- Create uniform module aliases for TC classifiers, actions, and
packet schedulers to simplify creating modprobe policies.
- Address all missing MODULE_DESCRIPTION() warnings in networking.
- Extend the Netlink descriptions in YAML to cover message
encapsulation or "Netlink polymorphism", where interpretation of
nested attributes depends on link type, classifier type or some
other "class type".
Drivers:
- Ethernet high-speed NICs:
- Add a new driver for Marvell's Octeon PCI Endpoint NIC VF.
- Intel (100G, ice, idpf):
- support E825-C devices
- nVidia/Mellanox:
- support devices with one port and multiple PCIe links
- Broadcom (bnxt):
- support n-tuple filters
- support configuring the RSS key
- Wangxun (ngbe/txgbe):
- implement irq_domain for TXGBE's sub-interrupts
- Pensando/AMD:
- support XDP
- optimize queue submission and wakeup handling (+17% bps)
- optimize struct layout, saving 28% of memory on queues
- Ethernet NICs embedded and virtual:
- Google cloud vNIC:
- refactor driver to perform memory allocations for new queue
config before stopping and freeing the old queue memory
- Synopsys (stmmac):
- obey queueMaxSDU and implement counters required by 802.1Qbv
- Renesas (ravb):
- support packet checksum offload
- suspend to RAM and runtime PM support
- Ethernet switches:
- nVidia/Mellanox:
- support for nexthop group statistics
- Microchip:
- ksz8: implement PHY loopback
- add support for KSZ8567, a 7-port 10/100Mbps switch
- PTP:
- New driver for RENESAS FemtoClock3 Wireless clock generator.
- Support OCP PTP cards designed and built by Adva.
- CAN:
- Support recvmsg() flags for own, local and remote traffic on CAN
BCM sockets.
- Support for esd GmbH PCIe/402 CAN device family.
- m_can:
- Rx/Tx submission coalescing
- wake on frame Rx
- WiFi:
- Intel (iwlwifi):
- enable signaling and payload protected A-MSDUs
- support wider-bandwidth OFDMA
- support for new devices
- bump FW API to 89 for AX devices; 90 for BZ/SC devices
- MediaTek (mt76):
- mt7915: newer ADIE version support
- mt7925: radio temperature sensor support
- Qualcomm (ath11k):
- support 6 GHz station power modes: Low Power Indoor (LPI),
Standard Power) SP and Very Low Power (VLP)
- QCA6390 & WCN6855: support 2 concurrent station interfaces
- QCA2066 support
- Qualcomm (ath12k):
- refactoring in preparation for Multi-Link Operation (MLO)
support
- 1024 Block Ack window size support
- firmware-2.bin support
- support having multiple identical PCI devices (firmware needs
to have ATH12K_FW_FEATURE_MULTI_QRTR_ID)
- QCN9274: support split-PHY devices
- WCN7850: enable Power Save Mode in station mode
- WCN7850: P2P support
- RealTek:
- rtw88: support for more rtw8811cu and rtw8821cu devices
- rtw89: support SCAN_RANDOM_SN and SET_SCAN_DWELL
- rtlwifi: speed up USB firmware initialization
- rtwl8xxxu:
- RTL8188F: concurrent interface support
- Channel Switch Announcement (CSA) support in AP mode
- Broadcom (brcmfmac):
- per-vendor feature support
- per-vendor SAE password setup
- DMI nvram filename quirk for ACEPC W5 Pro"
* tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2255 commits)
nexthop: Fix splat with CONFIG_DEBUG_PREEMPT=y
nexthop: Fix out-of-bounds access during attribute validation
nexthop: Only parse NHA_OP_FLAGS for dump messages that require it
nexthop: Only parse NHA_OP_FLAGS for get messages that require it
bpf: move sleepable flag from bpf_prog_aux to bpf_prog
bpf: hardcode BPF_PROG_PACK_SIZE to 2MB * num_possible_nodes()
selftests/bpf: Add kprobe multi triggering benchmarks
ptp: Move from simple ida to xarray
vxlan: Remove generic .ndo_get_stats64
vxlan: Do not alloc tstats manually
devlink: Add comments to use netlink gen tool
nfp: flower: handle acti_netdevs allocation failure
net/packet: Add getsockopt support for PACKET_COPY_THRESH
net/netlink: Add getsockopt support for NETLINK_LISTEN_ALL_NSID
selftests/bpf: Add bpf_arena_htab test.
selftests/bpf: Add bpf_arena_list test.
selftests/bpf: Add unit tests for bpf_arena_alloc/free_pages
bpf: Add helper macro bpf_addr_space_cast()
libbpf: Recognize __arena global variables.
bpftool: Recognize arena map type
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"This is the usual mix of updates for drivers that are used on (mostly
ARM) SoCs with no other top-level subsystem tree, including:
- The SCMI firmware subsystem gains support for version 3.2 of the
specification and updates to the notification code
- Feature updates for Tegra and Qualcomm platforms for added hardware
support
- A number of platforms get soc_device additions for identifying
newly added chips from Renesas, Qualcomm, Mediatek and Google
- Trivial improvements for firmware and memory drivers amongst
others, in particular 'const' annotations throughout multiple
subsystems"
* tag 'soc-drivers-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits)
tee: make tee_bus_type const
soc: qcom: aoss: add missing kerneldoc for qmp members
soc: qcom: geni-se: drop unused kerneldoc struct geni_wrapper param
soc: qcom: spm: fix building with CONFIG_REGULATOR=n
bus: ti-sysc: constify the struct device_type usage
memory: stm32-fmc2-ebi: keep power domain on
memory: stm32-fmc2-ebi: add MP25 RIF support
memory: stm32-fmc2-ebi: add MP25 support
memory: stm32-fmc2-ebi: check regmap_read return value
dt-bindings: memory-controller: st,stm32: add MP25 support
dt-bindings: bus: imx-weim: convert to YAML
watchdog: s3c2410_wdt: use exynos_get_pmu_regmap_by_phandle() for PMU regs
soc: samsung: exynos-pmu: Add regmap support for SoCs that protect PMU regs
MAINTAINERS: Update SCMI entry with HWMON driver
MAINTAINERS: samsung: gs101: match patches touching Google Tensor SoC
memory: tegra: Fix indentation
memory: tegra: Add BPMP and ICC info for DLA clients
memory: tegra: Correct DLA client names
dt-bindings: memory: renesas,rpc-if: Document R-Car V4M support
firmware: arm_scmi: Update the supported clock protocol version
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says:
====================
pull-request: bpf-next 2024-03-11
We've added 59 non-merge commits during the last 9 day(s) which contain
a total of 88 files changed, 4181 insertions(+), 590 deletions(-).
The main changes are:
1) Enforce VM_IOREMAP flag and range in ioremap_page_range and introduce
VM_SPARSE kind and vm_area_[un]map_pages to be used in bpf_arena,
from Alexei.
2) Introduce bpf_arena which is sparse shared memory region between bpf
program and user space where structures inside the arena can have
pointers to other areas of the arena, and pointers work seamlessly for
both user-space programs and bpf programs, from Alexei and Andrii.
3) Introduce may_goto instruction that is a contract between the verifier
and the program. The verifier allows the program to loop assuming it's
behaving well, but reserves the right to terminate it, from Alexei.
4) Use IETF format for field definitions in the BPF standard
document, from Dave.
5) Extend struct_ops libbpf APIs to allow specify version suffixes for
stuct_ops map types, share the same BPF program between several map
definitions, and other improvements, from Eduard.
6) Enable struct_ops support for more than one page in trampolines,
from Kui-Feng.
7) Support kCFI + BPF on riscv64, from Puranjay.
8) Use bpf_prog_pack for arm64 bpf trampoline, from Puranjay.
9) Fix roundup_pow_of_two undefined behavior on 32-bit archs, from Toke.
====================
Link: https://lore.kernel.org/r/20240312003646.8692-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs uuid updates from Christian Brauner:
"This adds two new ioctl()s for getting the filesystem uuid and
retrieving the sysfs path based on the path of a mounted filesystem.
Getting the filesystem uuid has been implemented in filesystem
specific code for a while it's now lifted as a generic ioctl"
* tag 'vfs-6.9.uuid' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
xfs: add support for FS_IOC_GETFSSYSFSPATH
fs: add FS_IOC_GETFSSYSFSPATH
fat: Hook up sb->s_uuid
fs: FS_IOC_GETUUID
ovl: convert to super_set_uuid()
fs: super_set_uuid()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull block handle updates from Christian Brauner:
"Last cycle we changed opening of block devices, and opening a block
device would return a bdev_handle. This allowed us to implement
support for restricting and forbidding writes to mounted block
devices. It was accompanied by converting and adding helpers to
operate on bdev_handles instead of plain block devices.
That was already a good step forward but ultimately it isn't necessary
to have special purpose helpers for opening block devices internally
that return a bdev_handle.
Fundamentally, opening a block device internally should just be
equivalent to opening files. So now all internal opens of block
devices return files just as a userspace open would. Instead of
introducing a separate indirection into bdev_open_by_*() via struct
bdev_handle bdev_file_open_by_*() is made to just return a struct
file. Opening and closing a block device just becomes equivalent to
opening and closing a file.
This all works well because internally we already have a pseudo fs for
block devices and so opening block devices is simple. There's a few
places where we needed to be careful such as during boot when the
kernel is supposed to mount the rootfs directly without init doing it.
Here we need to take care to ensure that we flush out any asynchronous
file close. That's what we already do for opening, unpacking, and
closing the initramfs. So nothing new here.
The equivalence of opening and closing block devices to regular files
is a win in and of itself. But it also has various other advantages.
We can remove struct bdev_handle completely. Various low-level helpers
are now private to the block layer. Other helpers were simply
removable completely.
A follow-up series that is already reviewed build on this and makes it
possible to remove bdev->bd_inode and allows various clean ups of the
buffer head code as well. All places where we stashed a bdev_handle
now just stash a file and use simple accessors to get to the actual
block device which was already the case for bdev_handle"
* tag 'vfs-6.9.super' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (35 commits)
block: remove bdev_handle completely
block: don't rely on BLK_OPEN_RESTRICT_WRITES when yielding write access
bdev: remove bdev pointer from struct bdev_handle
bdev: make struct bdev_handle private to the block layer
bdev: make bdev_{release, open_by_dev}() private to block layer
bdev: remove bdev_open_by_path()
reiserfs: port block device access to file
ocfs2: port block device access to file
nfs: port block device access to files
jfs: port block device access to file
f2fs: port block device access to files
ext4: port block device access to file
erofs: port device access to file
btrfs: port device access to file
bcachefs: port block device access to file
target: port block device access to file
s390: port block device access to file
nvme: port block device access to file
block2mtd: port device access to files
bcache: port block device access to files
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"Misc features, cleanups, and fixes for vfs and individual filesystems.
Features:
- Support idmapped mounts for hugetlbfs.
- Add RWF_NOAPPEND flag for pwritev2(). This allows us to fix a bug
where the passed offset is ignored if the file is O_APPEND. The new
flag allows a caller to enforce that the offset is honored to
conform to posix even if the file was opened in append mode.
- Move i_mmap_rwsem in struct address_space to avoid false sharing
between i_mmap and i_mmap_rwsem.
- Convert efs, qnx4, and coda to use the new mount api.
- Add a generic is_dot_dotdot() helper that's used by various
filesystems and the VFS code instead of open-coding it multiple
times.
- Recently we've added stable offsets which allows stable ordering
when iterating directories exported through NFS on e.g., tmpfs
filesystems. Originally an xarray was used for the offset map but
that caused slab fragmentation issues over time. This switches the
offset map to the maple tree which has a dense mode that handles
this scenario a lot better. Includes tests.
- Finally merge the case-insensitive improvement series Gabriel has
been working on for a long time. This cleanly propagates case
insensitive operations through ->s_d_op which in turn allows us to
remove the quite ugly generic_set_encrypted_ci_d_ops() operations.
It also improves performance by trying a case-sensitive comparison
first and then fallback to case-insensitive lookup if that fails.
This also fixes a bug where overlayfs would be able to be mounted
over a case insensitive directory which would lead to all sort of
odd behaviors.
Cleanups:
- Make file_dentry() a simple accessor now that ->d_real() is
simplified because of the backing file work we did the last two
cycles.
- Use the dedicated file_mnt_idmap helper in ntfs3.
- Use smp_load_acquire/store_release() in the i_size_read/write
helpers and thus remove the hack to handle i_size reads in the
filemap code.
- The SLAB_MEM_SPREAD is a nop now. Remove it from various places in
fs/
- It's no longer necessary to perform a second built-in initramfs
unpack call because we retain the contents of the previous
extraction. Remove it.
- Now that we have removed various allocators kfree_rcu() always
works with kmem caches and kmalloc(). So simplify various places
that only use an rcu callback in order to handle the kmem cache
case.
- Convert the pipe code to use a lockdep comparison function instead
of open-coding the nesting making lockdep validation easier.
- Move code into fs-writeback.c that was located in a header but can
be made static as it's only used in that one file.
- Rewrite the alignment checking iterators for iovec and bvec to be
easier to read, and also significantly more compact in terms of
generated code. This saves 270 bytes of text on x86-64 (with
clang-18) and 224 bytes on arm64 (with gcc-13). In profiles it also
saves a bit of time for the same workload.
- Switch various places to use KMEM_CACHE instead of
kmem_cache_create().
- Use inode_set_ctime_to_ts() in inode_set_ctime_current()
- Use kzalloc() in name_to_handle_at() to avoid kernel infoleak.
- Various smaller cleanups for eventfds.
Fixes:
- Fix various comments and typos, and unneeded initializations.
- Fix stack allocation hack for clang in the select code.
- Improve dump_mapping() debug code on a best-effort basis.
- Fix build errors in various selftests.
- Avoid wrap-around instrumentation in various places.
- Don't allow user namespaces without an idmapping to be used for
idmapped mounts.
- Fix sysv sb_read() call.
- Fix fallback implementation of the get_name() export operation"
* tag 'vfs-6.9.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (70 commits)
hugetlbfs: support idmapped mounts
qnx4: convert qnx4 to use the new mount api
fs: use inode_set_ctime_to_ts to set inode ctime to current time
libfs: Drop generic_set_encrypted_ci_d_ops
ubifs: Configure dentry operations at dentry-creation time
f2fs: Configure dentry operations at dentry-creation time
ext4: Configure dentry operations at dentry-creation time
libfs: Add helper to choose dentry operations at mount-time
libfs: Merge encrypted_ci_dentry_ops and ci_dentry_ops
fscrypt: Drop d_revalidate once the key is added
fscrypt: Drop d_revalidate for valid dentries during lookup
fscrypt: Factor out a helper to configure the lookup dentry
ovl: Always reject mounting over case-insensitive directories
libfs: Attempt exact-match comparison first during casefolded lookup
efs: remove SLAB_MEM_SPREAD flag usage
jfs: remove SLAB_MEM_SPREAD flag usage
minix: remove SLAB_MEM_SPREAD flag usage
openpromfs: remove SLAB_MEM_SPREAD flag usage
proc: remove SLAB_MEM_SPREAD flag usage
qnx6: remove SLAB_MEM_SPREAD flag usage
...
|
|
ioremap_page_range() should be used for ranges within vmalloc range only.
The vmalloc ranges are allocated by get_vm_area(). PCI has "resource"
allocator that manages PCI_IOBASE, IO_SPACE_LIMIT address range, hence
introduce vmap_page_range() to be used exclusively to map pages
in PCI address space.
Fixes: 3e49a866c9dc ("mm: Enforce VM_IOREMAP flag and range in ioremap_page_range.")
Reported-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://lore.kernel.org/bpf/CANiq72ka4rir+RTN2FQoT=Vvprp_Ao-CvoYEkSNqtSY+RZj+AA@mail.gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"6 hotfixes. 4 are cc:stable and the remainder pertain to post-6.7
issues or aren't considered to be needed in earlier kernel versions"
* tag 'mm-hotfixes-stable-2024-03-07-16-17' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
scripts/gdb/symbols: fix invalid escape sequence warning
mailmap: fix Kishon's email
init/Kconfig: lower GCC version check for -Warray-bounds
mm, mmap: fix vma_merge() case 7 with vma_ops->close
mm: userfaultfd: fix unexpected change to src_folio when UFFDIO_MOVE fails
mm, vmscan: prevent infinite loop for costly GFP_NOIO | __GFP_RETRY_MAYFAIL allocations
|
|
vmap/vmalloc APIs are used to map a set of pages into contiguous kernel
virtual space.
get_vm_area() with appropriate flag is used to request an area of kernel
address range. It's used for vmalloc, vmap, ioremap, xen use cases.
- vmalloc use case dominates the usage. Such vm areas have VM_ALLOC flag.
- the areas created by vmap() function should be tagged with VM_MAP.
- ioremap areas are tagged with VM_IOREMAP.
BPF would like to extend the vmap API to implement a lazily-populated
sparse, yet contiguous kernel virtual space. Introduce VM_SPARSE flag
and vm_area_map_pages(area, start_addr, count, pages) API to map a set
of pages within a given area.
It has the same sanity checks as vmap() does.
It also checks that get_vm_area() was created with VM_SPARSE flag
which identifies such areas in /proc/vmallocinfo
and returns zero pages on read through /proc/kcore.
The next commits will introduce bpf_arena which is a sparsely populated
shared memory region between bpf program and user space process. It will
map privately-managed pages into a sparse vm area with the following steps:
// request virtual memory region during bpf prog verification
area = get_vm_area(area_size, VM_SPARSE);
// on demand
vm_area_map_pages(area, kaddr, kend, pages);
vm_area_unmap_pages(area, kaddr, kend);
// after bpf program is detached and unloaded
free_vm_area(area);
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Link: https://lore.kernel.org/bpf/20240305030516.41519-3-alexei.starovoitov@gmail.com
|
|
There are various users of get_vm_area() + ioremap_page_range() APIs.
Enforce that get_vm_area() was requested as VM_IOREMAP type and range
passed to ioremap_page_range() matches created vm_area to avoid
accidentally ioremap-ing into wrong address range.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/bpf/20240305030516.41519-2-alexei.starovoitov@gmail.com
|
|
When draining a page_frag_cache, most user are doing
the similar steps, so introduce an API to avoid code
duplication.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently there seems to be three page frag implementations
which all try to allocate order 3 page, if that fails, it
then fail back to allocate order 0 page, and each of them
all allow order 3 page allocation to fail under certain
condition by using specific gfp bits.
The gfp bits for order 3 page allocation are different
between different implementation, __GFP_NOMEMALLOC is
or'd to forbid access to emergency reserves memory for
__page_frag_cache_refill(), but it is not or'd in other
implementions, __GFP_DIRECT_RECLAIM is masked off to avoid
direct reclaim in vhost_net_page_frag_refill(), but it is
not masked off in __page_frag_cache_refill().
This patch unifies the gfp bits used between different
implementions by or'ing __GFP_NOMEMALLOC and masking off
__GFP_DIRECT_RECLAIM for order 3 page allocation to avoid
possible pressure for mm.
Leave the gfp unifying for page frag implementation in sock.c
for now as suggested by Paolo Abeni.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
CC: Alexander Duyck <alexander.duyck@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
napi_alloc_frag_align() and netdev_alloc_frag_align() accept
align as an argument, and they are thin wrappers around the
__napi_alloc_frag_align() and __netdev_alloc_frag_align() APIs
doing the alignment checking and align mask conversion, in order
to call page_frag_alloc_align() directly. The intention here is
to keep the alignment checking and the alignmask conversion in
in-line wrapper to avoid those kind of operations during execution
time since it can usually be handled during compile time.
We are going to use page_frag_alloc_align() in vhost_net.c, it
need the same kind of alignment checking and alignmask conversion,
so split up page_frag_alloc_align into an inline wrapper doing the
above operation, and add __page_frag_alloc_align() which is passed
with the align mask the original function expected as suggested by
Alexander.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
CC: Alexander Duyck <alexander.duyck@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When debugging issues with a workload using SysV shmem, Michal Hocko has
come up with a reproducer that shows how a series of mprotect() operations
can result in an elevated shm_nattch and thus leak of the resource.
The problem is caused by wrong assumptions in vma_merge() commit
714965ca8252 ("mm/mmap: start distinguishing if vma can be removed in
mergeability test"). The shmem vmas have a vma_ops->close callback that
decrements shm_nattch, and we remove the vma without calling it.
vma_merge() has thus historically avoided merging vma's with
vma_ops->close and commit 714965ca8252 was supposed to keep it that way.
It relaxed the checks for vma_ops->close in can_vma_merge_after() assuming
that it is never called on a vma that would be a candidate for removal.
However, the vma_merge() code does also use the result of this check in
the decision to remove a different vma in the merge case 7.
A robust solution would be to refactor vma_merge() code in a way that the
vma_ops->close check is only done for vma's that are actually going to be
removed, and not as part of the preliminary checks. That would both solve
the existing bug, and also allow additional merges that the checks
currently prevent unnecessarily in some cases.
However to fix the existing bug first with a minimized risk, and for
easier stable backports, this patch only adds a vma_ops->close check to
the buggy case 7 specifically. All other cases of vma removal are covered
by the can_vma_merge_before() check that includes the test for
vma_ops->close.
The reproducer code, adapted from Michal Hocko's code:
int main(int argc, char *argv[]) {
int segment_id;
size_t segment_size = 20 * PAGE_SIZE;
char * sh_mem;
struct shmid_ds shmid_ds;
key_t key = 0x1234;
segment_id = shmget(key, segment_size,
IPC_CREAT | IPC_EXCL | S_IRUSR | S_IWUSR);
sh_mem = (char *)shmat(segment_id, NULL, 0);
mprotect(sh_mem + 2*PAGE_SIZE, PAGE_SIZE, PROT_NONE);
mprotect(sh_mem + PAGE_SIZE, PAGE_SIZE, PROT_WRITE);
mprotect(sh_mem + 2*PAGE_SIZE, PAGE_SIZE, PROT_WRITE);
shmdt(sh_mem);
shmctl(segment_id, IPC_STAT, &shmid_ds);
printf("nattch after shmdt(): %lu (expected: 0)\n", shmid_ds.shm_nattch);
if (shmctl(segment_id, IPC_RMID, 0))
printf("IPCRM failed %d\n", errno);
return (shmid_ds.shm_nattch) ? 1 : 0;
}
Link: https://lkml.kernel.org/r/20240222215930.14637-2-vbabka@suse.cz
Fixes: 714965ca8252 ("mm/mmap: start distinguishing if vma can be removed in mergeability test")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
After ptep_clear_flush(), if we find that src_folio is pinned we will fail
UFFDIO_MOVE and put src_folio back to src_pte entry, but the change to
src_folio->{mapping,index} is not restored in this process. This is not
what we expected, so fix it.
This can cause the rmap for that page to be invalid, possibly resulting
in memory corruption. At least swapout+migration would no longer work,
because we might fail to locate the mappings of that folio.
Link: https://lkml.kernel.org/r/20240222080815.46291-1-zhengqi.arch@bytedance.com
Fixes: adef440691ba ("userfaultfd: UFFDIO_MOVE uABI")
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
allocations
Sven reports an infinite loop in __alloc_pages_slowpath() for costly order
__GFP_RETRY_MAYFAIL allocations that are also GFP_NOIO. Such combination
can happen in a suspend/resume context where a GFP_KERNEL allocation can
have __GFP_IO masked out via gfp_allowed_mask.
Quoting Sven:
1. try to do a "costly" allocation (order > PAGE_ALLOC_COSTLY_ORDER)
with __GFP_RETRY_MAYFAIL set.
2. page alloc's __alloc_pages_slowpath tries to get a page from the
freelist. This fails because there is nothing free of that costly
order.
3. page alloc tries to reclaim by calling __alloc_pages_direct_reclaim,
which bails out because a zone is ready to be compacted; it pretends
to have made a single page of progress.
4. page alloc tries to compact, but this always bails out early because
__GFP_IO is not set (it's not passed by the snd allocator, and even
if it were, we are suspending so the __GFP_IO flag would be cleared
anyway).
5. page alloc believes reclaim progress was made (because of the
pretense in item 3) and so it checks whether it should retry
compaction. The compaction retry logic thinks it should try again,
because:
a) reclaim is needed because of the early bail-out in item 4
b) a zonelist is suitable for compaction
6. goto 2. indefinite stall.
(end quote)
The immediate root cause is confusing the COMPACT_SKIPPED returned from
__alloc_pages_direct_compact() (step 4) due to lack of __GFP_IO to be
indicating a lack of order-0 pages, and in step 5 evaluating that in
should_compact_retry() as a reason to retry, before incrementing and
limiting the number of retries. There are however other places that
wrongly assume that compaction can happen while we lack __GFP_IO.
To fix this, introduce gfp_compaction_allowed() to abstract the __GFP_IO
evaluation and switch the open-coded test in try_to_compact_pages() to use
it.
Also use the new helper in:
- compaction_ready(), which will make reclaim not bail out in step 3, so
there's at least one attempt to actually reclaim, even if chances are
small for a costly order
- in_reclaim_compaction() which will make should_continue_reclaim()
return false and we don't over-reclaim unnecessarily
- in __alloc_pages_slowpath() to set a local variable can_compact,
which is then used to avoid retrying reclaim/compaction for costly
allocations (step 5) if we can't compact and also to skip the early
compaction attempt that we do in some cases
Link: https://lkml.kernel.org/r/20240221114357.13655-2-vbabka@suse.cz
Fixes: 3250845d0526 ("Revert "mm, oom: prevent premature OOM killer invocation for high order request"")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Sven van Ashbrook <svenva@chromium.org>
Closes: https://lore.kernel.org/all/CAG-rBihs_xMKb3wrMO1%2B-%2Bp4fowP9oy1pa_OTkfxBzPUVOZF%2Bg@mail.gmail.com/
Tested-by: Karthikeyan Ramasubramanian <kramasub@chromium.org>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Curtis Malainey <cujomalainey@chromium.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"Six hotfixes. Three are cc:stable and the remainder address post-6.7
issues or aren't considered appropriate for backporting"
* tag 'mm-hotfixes-stable-2024-02-27-14-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/debug_vm_pgtable: fix BUG_ON with pud advanced test
mm: cachestat: fix folio read-after-free in cache walk
MAINTAINERS: add memory mapping entry with reviewers
mm/vmscan: fix a bug calling wakeup_kswapd() with a wrong zone index
kasan: revert eviction of stack traces in generic mode
stackdepot: use variable size records for non-evictable entries
|
|
Link: https://lore.kernel.org/r/20240123-vfs-bdev-file-v2-5-adbd023e19cc@kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fixes from Dan Williams:
"A collection of significant fixes for the CXL subsystem.
The largest change in this set, that bordered on "new development", is
the fix for the fact that the location of the new qos_class attribute
did not match the Documentation. The fix ends up deleting more code
than it added, and it has a new unit test to backstop basic errors in
this interface going forward. So the "red-diff" and unit test saved
the "rip it out and try again" response.
In contrast, the new notification path for firmware reported CXL
errors (CXL CPER notifications) has a locking context bug that can not
be fixed with a red-diff. Given where the release cycle stands, it is
not comfortable to squeeze in that fix in these waning days. So, that
receives the "back it out and try again later" treatment.
There is a regression fix in the code that establishes memory NUMA
nodes for platform CXL regions. That has an ack from x86 folks. There
are a couple more fixups for Linux to understand (reassemble) CXL
regions instantiated by platform firmware. The policy around platforms
that do not match host-physical-address with system-physical-address
(i.e. systems that have an address translation mechanism between the
address range reported in the ACPI CEDT.CFMWS and endpoint decoders)
has been softened to abort driver load rather than teardown the memory
range (can cause system hangs). Lastly, there is a robustness /
regression fix for cases where the driver would previously continue in
the face of error, and a fixup for PCI error notification handling.
Summary:
- Fix NUMA initialization from ACPI CEDT.CFMWS
- Fix region assembly failures due to async init order
- Fix / simplify export of qos_class information
- Fix cxl_acpi initialization vs single-window-init failures
- Fix handling of repeated 'pci_channel_io_frozen' notifications
- Workaround platforms that violate host-physical-address ==
system-physical address assumptions
- Defer CXL CPER notification handling to v6.9"
* tag 'cxl-fixes-6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/acpi: Fix load failures due to single window creation failure
acpi/ghes: Remove CXL CPER notifications
cxl/pci: Fix disabling memory if DVSEC CXL Range does not match a CFMWS window
cxl/test: Add support for qos_class checking
cxl: Fix sysfs export of qos_class for memdev
cxl: Remove unnecessary type cast in cxl_qos_class_verify()
cxl: Change 'struct cxl_memdev_state' *_perf_list to single 'struct cxl_dpa_perf'
cxl/region: Allow out of order assembly of autodiscovered regions
cxl/region: Handle endpoint decoders in cxl_region_find_decoder()
x86/numa: Fix the sort compare func used in numa_fill_memblks()
x86/numa: Fix the address overlap check in numa_fill_memblks()
cxl/pci: Skip to handle RAS errors if CXL.mem device is detached
|
|
Architectures like powerpc add debug checks to ensure we find only devmap
PUD pte entries. These debug checks are only done with CONFIG_DEBUG_VM.
This patch marks the ptes used for PUD advanced test devmap pte entries so
that we don't hit on debug checks on architecture like ppc64 as below.
WARNING: CPU: 2 PID: 1 at arch/powerpc/mm/book3s64/radix_pgtable.c:1382 radix__pud_hugepage_update+0x38/0x138
....
NIP [c0000000000a7004] radix__pud_hugepage_update+0x38/0x138
LR [c0000000000a77a8] radix__pudp_huge_get_and_clear+0x28/0x60
Call Trace:
[c000000004a2f950] [c000000004a2f9a0] 0xc000000004a2f9a0 (unreliable)
[c000000004a2f980] [000d34c100000000] 0xd34c100000000
[c000000004a2f9a0] [c00000000206ba98] pud_advanced_tests+0x118/0x334
[c000000004a2fa40] [c00000000206db34] debug_vm_pgtable+0xcbc/0x1c48
[c000000004a2fc10] [c00000000000fd28] do_one_initcall+0x60/0x388
Also
kernel BUG at arch/powerpc/mm/book3s64/pgtable.c:202!
....
NIP [c000000000096510] pudp_huge_get_and_clear_full+0x98/0x174
LR [c00000000206bb34] pud_advanced_tests+0x1b4/0x334
Call Trace:
[c000000004a2f950] [000d34c100000000] 0xd34c100000000 (unreliable)
[c000000004a2f9a0] [c00000000206bb34] pud_advanced_tests+0x1b4/0x334
[c000000004a2fa40] [c00000000206db34] debug_vm_pgtable+0xcbc/0x1c48
[c000000004a2fc10] [c00000000000fd28] do_one_initcall+0x60/0x388
Link: https://lkml.kernel.org/r/20240129060022.68044-1-aneesh.kumar@kernel.org
Fixes: 27af67f35631 ("powerpc/book3s64/mm: enable transparent pud hugepage")
Signed-off-by: Aneesh Kumar K.V (IBM) <aneesh.kumar@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In cachestat, we access the folio from the page cache's xarray to compute
its page offset, and check for its dirty and writeback flags. However, we
do not hold a reference to the folio before performing these actions,
which means the folio can concurrently be released and reused as another
folio/page/slab.
Get around this altogether by just using xarray's existing machinery for
the folio page offsets and dirty/writeback states.
This changes behavior for tmpfs files to now always report zeroes in their
dirty and writeback counters. This is okay as tmpfs doesn't follow
conventional writeback cache behavior: its pages get "cleaned" during
swapout, after which they're no longer resident etc.
Link: https://lkml.kernel.org/r/20240220153409.GA216065@cmpxchg.org
Fixes: cf264e1329fb ("cachestat: implement cachestat syscall")
Reported-by: Jann Horn <jannh@google.com>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Tested-by: Jann Horn <jannh@google.com>
Cc: <stable@vger.kernel.org> [6.4+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
With numa balancing on, when a numa system is running where a numa node
doesn't have its local memory so it has no managed zones, the following
oops has been observed. It's because wakeup_kswapd() is called with a
wrong zone index, -1. Fixed it by checking the index before calling
wakeup_kswapd().
> BUG: unable to handle page fault for address: 00000000000033f3
> #PF: supervisor read access in kernel mode
> #PF: error_code(0x0000) - not-present page
> PGD 0 P4D 0
> Oops: 0000 [#1] PREEMPT SMP NOPTI
> CPU: 2 PID: 895 Comm: masim Not tainted 6.6.0-dirty #255
> Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
> rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
> RIP: 0010:wakeup_kswapd (./linux/mm/vmscan.c:7812)
> Code: (omitted)
> RSP: 0000:ffffc90004257d58 EFLAGS: 00010286
> RAX: ffffffffffffffff RBX: ffff88883fff0480 RCX: 0000000000000003
> RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88883fff0480
> RBP: ffffffffffffffff R08: ff0003ffffffffff R09: ffffffffffffffff
> R10: ffff888106c95540 R11: 0000000055555554 R12: 0000000000000003
> R13: 0000000000000000 R14: 0000000000000000 R15: ffff88883fff0940
> FS: 00007fc4b8124740(0000) GS:ffff888827c00000(0000) knlGS:0000000000000000
> CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> CR2: 00000000000033f3 CR3: 000000026cc08004 CR4: 0000000000770ee0
> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
> PKRU: 55555554
> Call Trace:
> <TASK>
> ? __die
> ? page_fault_oops
> ? __pte_offset_map_lock
> ? exc_page_fault
> ? asm_exc_page_fault
> ? wakeup_kswapd
> migrate_misplaced_page
> __handle_mm_fault
> handle_mm_fault
> do_user_addr_fault
> exc_page_fault
> asm_exc_page_fault
> RIP: 0033:0x55b897ba0808
> Code: (omitted)
> RSP: 002b:00007ffeefa821a0 EFLAGS: 00010287
> RAX: 000055b89983acd0 RBX: 00007ffeefa823f8 RCX: 000055b89983acd0
> RDX: 00007fc2f8122010 RSI: 0000000000020000 RDI: 000055b89983acd0
> RBP: 00007ffeefa821a0 R08: 0000000000000037 R09: 0000000000000075
> R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000000
> R13: 00007ffeefa82410 R14: 000055b897ba5dd8 R15: 00007fc4b8340000
> </TASK>
Link: https://lkml.kernel.org/r/20240216111502.79759-1-byungchul@sk.com
Signed-off-by: Byungchul Park <byungchul@sk.com>
Reported-by: Hyeongtak Ji <hyeongtak.ji@sk.com>
Fixes: c574bbe917036 ("NUMA balancing: optimize page placement for memory tiering system")
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This partially reverts commits cc478e0b6bdf, 63b85ac56a64, 08d7c94d9635,
a414d4286f34, and 773688a6cb24 to make use of variable-sized stack depot
records, since eviction of stack entries from stack depot forces fixed-
sized stack records. Care was taken to retain the code cleanups by the
above commits.
Eviction was added to generic KASAN as a response to alleviating the
additional memory usage from fixed-sized stack records, but this still
uses more memory than previously.
With the re-introduction of variable-sized records for stack depot, we can
just switch back to non-evictable stack records again, and return back to
the previous performance and memory usage baseline.
Before (observed after a KASAN kernel boot):
pools: 597
refcounted_allocations: 17547
refcounted_frees: 6477
refcounted_in_use: 11070
freelist_size: 3497
persistent_count: 12163
persistent_bytes: 1717008
After:
pools: 319
refcounted_allocations: 0
refcounted_frees: 0
refcounted_in_use: 0
freelist_size: 0
persistent_count: 29397
persistent_bytes: 5183536
As can be seen from the counters, with a generic KASAN config, refcounted
allocations and evictions are no longer used. Due to using variable-sized
records, I observe a reduction of 278 stack depot pools (saving 4448 KiB)
with my test setup.
Link: https://lkml.kernel.org/r/20240129100708.39460-2-elver@google.com
Fixes: cc478e0b6bdf ("kasan: avoid resetting aux_lock")
Fixes: 63b85ac56a64 ("kasan: stop leaking stack trace handles")
Fixes: 08d7c94d9635 ("kasan: memset free track in qlink_free")
Fixes: a414d4286f34 ("kasan: handle concurrent kasan_record_aux_stack calls")
Fixes: 773688a6cb24 ("kasan: use stack_depot_put for Generic mode")
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
https://lore.kernel.org/r/170820083431.6328.16233178852085891453.stgit@91.116.238.104.host.secureserver.net
Pull simple offset series from Chuck Lever
In an effort to address slab fragmentation issues reported a few
months ago, I've replaced the use of xarrays for the directory
offset map in "simple" file systems (including tmpfs).
Thanks to Liam Howlett for helping me get this working with Maple
Trees.
* series 'Use Maple Trees for simple_offset utilities' of https://lore.kernel.org/r/170820083431.6328.16233178852085891453.stgit@91.116.238.104.host.secureserver.net: (6 commits)
libfs: Convert simple directory offsets to use a Maple Tree
test_maple_tree: testing the cyclic allocation
maple_tree: Add mtree_alloc_cyclic()
libfs: Add simple_offset_empty()
libfs: Define a minimum directory offset
libfs: Re-arrange locking in offset_iterate_dir()
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
For simple filesystems that use directory offset mapping, rely
strictly on the directory offset map to tell when a directory has
no children.
After this patch is applied, the emptiness test holds only the RCU
read lock when the directory being tested has no children.
In addition, this adds another layer of confirmation that
simple_offset_add/remove() are working as expected.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/170820143463.6328.7872919188371286951.stgit@91.116.238.104.host.secureserver.net
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Pick up CXL CPER notification removal for v6.8-rc6, to return in a later
merge window.
|
|
release_free_meta() accesses the shadow directly through the path
kasan_slab_free
__kasan_slab_free
kasan_release_object_meta
release_free_meta
kasan_mem_to_shadow
There are no kasan_arch_is_ready() guards here, allowing an oops when the
shadow is not initialized. The oops can be seen on a Power8 KVM guest.
This patch adds the guard to release_free_meta(), as it's the first level
that specifically requires the shadow.
It is safe to put the guard at the start of this function, before the
stack put: only kasan_save_free_info() can initialize the saved stack,
which itself is guarded with kasan_arch_is_ready() by its caller
poison_slab_object(). If the arch becomes ready before
release_free_meta() then we will not observe KASAN_SLAB_FREE_META in the
object's shadow, so we will not put an uninitialized stack either.
Link: https://lkml.kernel.org/r/20240213033958.139383-1-bgray@linux.ibm.com
Fixes: 63b85ac56a64 ("kasan: stop leaking stack trace handles")
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
For online parameters change, DAMON_LRU_SORT creates new schemes based on
latest values of the parameters and replaces the old schemes with the new
one. When creating it, the internal status of the quotas of the old
schemes is not preserved. As a result, charging of the quota starts from
zero after the online tuning. The data that collected to estimate the
throughput of the scheme's action is also reset, and therefore the
estimation should start from the scratch again. Because the throughput
estimation is being used to convert the time quota to the effective size
quota, this could result in temporal time quota inaccuracy. It would be
recovered over time, though. In short, the quota accuracy could be
temporarily degraded after online parameters update.
Fix the problem by checking the case and copying the internal fields for
the status.
Link: https://lkml.kernel.org/r/20240216194025.9207-3-sj@kernel.org
Fixes: 40e983cca927 ("mm/damon: introduce DAMON-based LRU-lists Sorting")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [6.0+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm/damon: fix quota status loss due to online tunings".
DAMON_RECLAIM and DAMON_LRU_SORT is not preserving internal quota status
when applying new user parameters, and hence could cause temporal quota
accuracy degradation. Fix it by preserving the status.
This patch (of 2):
For online parameters change, DAMON_RECLAIM creates new scheme based on
latest values of the parameters and replaces the old scheme with the new
one. When creating it, the internal status of the quota of the old
scheme is not preserved. As a result, charging of the quota starts from
zero after the online tuning. The data that collected to estimate the
throughput of the scheme's action is also reset, and therefore the
estimation should start from the scratch again. Because the throughput
estimation is being used to convert the time quota to the effective size
quota, this could result in temporal time quota inaccuracy. It would be
recovered over time, though. In short, the quota accuracy could be
temporarily degraded after online parameters update.
Fix the problem by checking the case and copying the internal fields for
the status.
Link: https://lkml.kernel.org/r/20240216194025.9207-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20240216194025.9207-2-sj@kernel.org
Fixes: e035c280f6df ("mm/damon/reclaim: support online inputs update")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [5.19+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
commit_schemes_quota_goals
'commit_schemes_quota_goals' command handler,
damos_sysfs_set_quota_scores() assumes the number of schemes sysfs
directory will be same to the number of schemes of the DAMON context. The
assumption is wrong since users can remove schemes sysfs directories while
DAMON is running. In the case, illegal memory accesses can happen. Fix
it by checking the case.
Link: https://lkml.kernel.org/r/20240213023633.124928-1-sj@kernel.org
Fixes: d91beaa505a0 ("mm/damon/sysfs-schemes: implement a command for scheme quota goals only commit")
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The swapaccount deprecation warning is throwing false positives. Since we
deprecated the knob and defaulted to enabling, the only reports we've been
getting are from folks that set swapaccount=1. While this is a nice
affirmation that always-enabling was the right choice, we certainly don't
want to warn when users request the supported mode.
Only warn when disabling is requested, and clarify the warning.
[colin.i.king@gmail.com: spelling: "commdandline" -> "commandline"]
Link: https://lkml.kernel.org/r/20240215090544.1649201-1-colin.i.king@gmail.com
Link: https://lkml.kernel.org/r/20240213081634.3652326-1-hannes@cmpxchg.org
Fixes: b25806dcd3d5 ("mm: memcontrol: deprecate swapaccounting=0 mode")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reported-by: "Jonas Schäfer" <jonas@wielicki.name>
Reported-by: Narcis Garcia <debianlists@actiu.net>
Suggested-by: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The commit 77e6c43e137c ("memblock: introduce MEMBLOCK_RSRV_NOINIT flag")
skipped adding this newly introduced memblock flag into flagname[] array,
thus preventing a correct memblock flags output for applicable memblock
regions.
Link: https://lkml.kernel.org/r/20240209030912.1382251-1-anshuman.khandual@arm.com
Fixes: 77e6c43e137c ("memblock: introduce MEMBLOCK_RSRV_NOINIT flag")
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Mike Rapoport <rppt@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We have to invalidate any duplicate entry even when !zswap_enabled since
zswap can be disabled anytime. If the folio store success before, then
got dirtied again but zswap disabled, we won't invalidate the old
duplicate entry in the zswap_store(). So later lru writeback may
overwrite the new data in swapfile.
Link: https://lkml.kernel.org/r/20240208023254.3873823-1-chengming.zhou@linux.dev
Fixes: 42c06a0e8ebe ("mm: kill frontswap")
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When skipping swapcache for SWP_SYNCHRONOUS_IO, if two or more threads
swapin the same entry at the same time, they get different pages (A, B).
Before one thread (T0) finishes the swapin and installs page (A) to the
PTE, another thread (T1) could finish swapin of page (B), swap_free the
entry, then swap out the possibly modified page reusing the same entry.
It breaks the pte_same check in (T0) because PTE value is unchanged,
causing ABA problem. Thread (T0) will install a stalled page (A) into the
PTE and cause data corruption.
One possible callstack is like this:
CPU0 CPU1
---- ----
do_swap_page() do_swap_page() with same entry
<direct swapin path> <direct swapin path>
<alloc page A> <alloc page B>
swap_read_folio() <- read to page A swap_read_folio() <- read to page B
<slow on later locks or interrupt> <finished swapin first>
... set_pte_at()
swap_free() <- entry is free
<write to page B, now page A stalled>
<swap out page B to same swap entry>
pte_same() <- Check pass, PTE seems
unchanged, but page A
is stalled!
swap_free() <- page B content lost!
set_pte_at() <- staled page A installed!
And besides, for ZRAM, swap_free() allows the swap device to discard the
entry content, so even if page (B) is not modified, if swap_read_folio()
on CPU0 happens later than swap_free() on CPU1, it may also cause data
loss.
To fix this, reuse swapcache_prepare which will pin the swap entry using
the cache flag, and allow only one thread to swap it in, also prevent any
parallel code from putting the entry in the cache. Release the pin after
PT unlocked.
Racers just loop and wait since it's a rare and very short event. A
schedule_timeout_uninterruptible(1) call is added to avoid repeated page
faults wasting too much CPU, causing livelock or adding too much noise to
perf statistics. A similar livelock issue was described in commit
029c4628b2eb ("mm: swap: get rid of livelock in swapin readahead")
Reproducer:
This race issue can be triggered easily using a well constructed
reproducer and patched brd (with a delay in read path) [1]:
With latest 6.8 mainline, race caused data loss can be observed easily:
$ gcc -g -lpthread test-thread-swap-race.c && ./a.out
Polulating 32MB of memory region...
Keep swapping out...
Starting round 0...
Spawning 65536 workers...
32746 workers spawned, wait for done...
Round 0: Error on 0x5aa00, expected 32746, got 32743, 3 data loss!
Round 0: Error on 0x395200, expected 32746, got 32743, 3 data loss!
Round 0: Error on 0x3fd000, expected 32746, got 32737, 9 data loss!
Round 0 Failed, 15 data loss!
This reproducer spawns multiple threads sharing the same memory region
using a small swap device. Every two threads updates mapped pages one by
one in opposite direction trying to create a race, with one dedicated
thread keep swapping out the data out using madvise.
The reproducer created a reproduce rate of about once every 5 minutes, so
the race should be totally possible in production.
After this patch, I ran the reproducer for over a few hundred rounds and
no data loss observed.
Performance overhead is minimal, microbenchmark swapin 10G from 32G
zram:
Before: 10934698 us
After: 11157121 us
Cached: 13155355 us (Dropping SWP_SYNCHRONOUS_IO flag)
[kasong@tencent.com: v4]
Link: https://lkml.kernel.org/r/20240219082040.7495-1-ryncsn@gmail.com
Link: https://lkml.kernel.org/r/20240206182559.32264-1-ryncsn@gmail.com
Fixes: 0bcac06f27d7 ("mm, swap: skip swapcache for swapin of synchronous device")
Reported-by: "Huang, Ying" <ying.huang@intel.com>
Closes: https://lore.kernel.org/lkml/87bk92gqpx.fsf_-_@yhuang6-desk2.ccr.corp.intel.com/
Link: https://github.com/ryncsn/emm-test-project/tree/master/swap-stress-race [1]
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Yu Zhao <yuzhao@google.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Chris Li <chrisl@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Barry Song <21cnbao@gmail.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When a folio is swapped in, the protection size of the corresponding zswap
LRU is incremented, so that the zswap shrinker is more conservative with
its reclaiming action. This field is embedded within the struct lruvec,
so updating it requires looking up the folio's memcg and lruvec. However,
currently this lookup can happen after the folio is unlocked, for instance
if a new folio is allocated, and swap_read_folio() unlocks the folio
before returning. In this scenario, there is no stability guarantee for
the binding between a folio and its memcg and lruvec:
* A folio's memcg and lruvec can be freed between the lookup and the
update, leading to a UAF.
* Folio migration can clear the now-unlocked folio's memcg_data, which
directs the zswap LRU protection size update towards the root memcg
instead of the original memcg. This was recently picked up by the
syzbot thanks to a warning in the inlined folio_lruvec() call.
Move the zswap LRU protection range update above the swap_read_folio()
call, and only when a new page is allocated, to prevent this.
[nphamcs@gmail.com: add VM_WARN_ON_ONCE() to zswap_folio_swapin()]
Link: https://lkml.kernel.org/r/20240206180855.3987204-1-nphamcs@gmail.com
[nphamcs@gmail.com: remove unneeded if (folio) checks]
Link: https://lkml.kernel.org/r/20240206191355.83755-1-nphamcs@gmail.com
Link: https://lkml.kernel.org/r/20240205232442.3240571-1-nphamcs@gmail.com
Fixes: b5ba474f3f51 ("zswap: shrink zswap pool based on memory pressure")
Reported-by: syzbot+17a611d10af7d18a7092@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/000000000000ae47f90610803260@google.com/
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
kdamond_apply_schemes() checks apply intervals of schemes and avoid
further applying any schemes if no scheme passed its apply interval.
However, the following schemes applying function, damon_do_apply_schemes()
iterates all schemes without the apply interval check. As a result, the
shortest apply interval is applied to all schemes. Fix the problem by
checking the apply interval in damon_do_apply_schemes().
Link: https://lkml.kernel.org/r/20240205201306.88562-1-sj@kernel.org
Fixes: 42f994b71404 ("mm/damon/core: implement scheme-specific apply interval")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [6.7.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In zswap_writeback_entry(), after we get a folio from
__read_swap_cache_async(), we grab the tree lock again to check that the
swap entry was not invalidated and recycled. If it was, we delete the
folio we just added to the swap cache and exit.
However, __read_swap_cache_async() returns the folio locked when it is
newly allocated, which is always true for this path, and the folio is
ref'd. Make sure to unlock and put the folio before returning.
This was discovered by code inspection, probably because this path handles
a race condition that should not happen often, and the bug would not crash
the system, it will only strand the folio indefinitely.
Link: https://lkml.kernel.org/r/20240125085127.1327013-1-yosryahmed@google.com
Fixes: 04fc7816089c ("mm: fix zswap writeback race condition")
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
numa_fill_memblks() fills in the gaps in numa_meminfo memblks over a
physical address range. To do so, it first creates a list of existing
memblks that overlap that address range. The issue is that it is off
by one when comparing to the end of the address range, so memblks
that do not overlap are selected.
The impact of selecting a memblk that does not actually overlap is
that an existing memblk may be filled when the expected action is to
do nothing and return NUMA_NO_MEMBLK to the caller. The caller can
then add a new NUMA node and memblk.
Replace the broken open-coded search for address overlap with the
memblock helper memblock_addrs_overlap(). Update the kernel doc
and in code comments.
Suggested by: "Huang, Ying" <ying.huang@intel.com>
Fixes: 8f012db27c95 ("x86/numa: Introduce numa_fill_memblks()")
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/10a3e6109c34c21a8dd4c513cf63df63481a2b07.1705085543.git.alison.schofield@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
On architectures with delay slot, instruction_pointer() may differ
from where exception was triggered.
Use exception_ip we just introduced to search exception tables to
get rid of the problem.
Fixes: 4bce37a68ff8 ("mips/mm: Convert to using lock_mm_and_find_vma()")
Reported-by: Xi Ruoyao <xry111@xry111.site>
Link: https://lore.kernel.org/r/75e9fd7b08562ad9b456a5bdaacb7cc220311cc9.camel@xry111.site/
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"21 hotfixes. 12 are cc:stable and the remainder pertain to post-6.7
issues or aren't considered to be needed in earlier kernel versions"
* tag 'mm-hotfixes-stable-2024-02-10-11-16' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (21 commits)
nilfs2: fix potential bug in end_buffer_async_write
mm/damon/sysfs-schemes: fix wrong DAMOS tried regions update timeout setup
nilfs2: fix hang in nilfs_lookup_dirty_data_buffers()
MAINTAINERS: Leo Yan has moved
mm/zswap: don't return LRU_SKIP if we have dropped lru lock
fs,hugetlb: fix NULL pointer dereference in hugetlbs_fill_super
mailmap: switch email address for John Moon
mm: zswap: fix objcg use-after-free in entry destruction
mm/madvise: don't forget to leave lazy MMU mode in madvise_cold_or_pageout_pte_range()
arch/arm/mm: fix major fault accounting when retrying under per-VMA lock
selftests: core: include linux/close_range.h for CLOSE_RANGE_* macros
mm/memory-failure: fix crash in split_huge_page_to_list from soft_offline_page
mm: memcg: optimize parent iteration in memcg_rstat_updated()
nilfs2: fix data corruption in dsync block recovery for small block sizes
mm/userfaultfd: UFFDIO_MOVE implementation should use ptep_get()
exit: wait_task_zombie: kill the no longer necessary spin_lock_irq(siglock)
fs/proc: do_task_stat: use sig->stats_lock to gather the threads/children stats
fs/proc: do_task_stat: move thread_group_cputime_adjusted() outside of lock_task_sighand()
getrusage: use sig->stats_lock rather than lock_task_sighand()
getrusage: move thread_group_cputime_adjusted() outside of lock_task_sighand()
...
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Update a potentially stale firmware attribute (Maurizio)
- Fixes for the recent verbose error logging (Keith, Chaitanya)
- Protection information payload size fix for passthrough (Francis)
- Fix for a queue freezing issue in virtblk (Yi)
- blk-iocost underflow fix (Tejun)
- blk-wbt task detection fix (Jan)
* tag 'block-6.8-2024-02-10' of git://git.kernel.dk/linux:
virtio-blk: Ensure no requests in virtqueues before deleting vqs.
blk-iocost: Fix an UBSAN shift-out-of-bounds warning
nvme: use ns->head->pi_size instead of t10_pi_tuple structure size
nvme-core: fix comment to reflect right functions
nvme: move passthrough logging attribute to head
blk-wbt: Fix detection of dirty-throttled tasks
nvme-host: fix the updating of the firmware version
|
|
Some weird old filesytems have UUID-like things that we wish to expose
as UUIDs, but are smaller; add a length field so that the new
FS_IOC_(GET|SET)UUID ioctls can handle them in generic code.
And add a helper super_set_uuid(), for setting nonstandard length uuids.
Helper is now required for the new FS_IOC_GETUUID ioctl; if
super_set_uuid() hasn't been called, the ioctl won't be supported.
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Link: https://lore.kernel.org/r/20240207025624.1019754-2-kent.overstreet@linux.dev
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
DAMON sysfs interface's update_schemes_tried_regions command has a timeout
of two apply intervals of the DAMOS scheme. Having zero value DAMOS
scheme apply interval means it will use the aggregation interval as the
value. However, the timeout setup logic is mistakenly using the sampling
interval insted of the aggregartion interval for the case. This could
cause earlier-than-expected timeout of the command. Fix it.
Link: https://lkml.kernel.org/r/20240202191956.88791-1-sj@kernel.org
Fixes: 7d6fa31a2fd7 ("mm/damon/sysfs-schemes: add timeout for update_schemes_tried_regions")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> # 6.7.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
LRU_SKIP can only be returned if we don't ever dropped lru lock, or we
need to return LRU_RETRY to restart from the head of lru list.
Otherwise, the iteration might continue from a cursor position that was
freed while the locks were dropped.
Actually we may need to introduce another LRU_STOP to really terminate the
ongoing shrinking scan process, when we encounter a warm page already in
the swap cache. The current list_lru implementation doesn't have this
function to early break from __list_lru_walk_one.
Link: https://lkml.kernel.org/r/20240126-zswap-writeback-race-v2-1-b10479847099@bytedance.com
Fixes: b5ba474f3f51 ("zswap: shrink zswap pool based on memory pressure")
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Chris Li <chriscli@google.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In the per-memcg LRU universe, LRU removal uses entry->objcg to determine
which list count needs to be decreased. Drop the objcg reference after
updating the LRU, to fix a possible use-after-free.
Link: https://lkml.kernel.org/r/20240130013438.565167-1-hannes@cmpxchg.org
Fixes: a65b0e7607cc ("zswap: make shrinking memcg-aware")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
madvise_cold_or_pageout_pte_range()
We need to leave lazy MMU mode before unlocking.
Link: https://lkml.kernel.org/r/20240126032608.355899-1-senozhatsky@chromium.org
Fixes: b2f557a21bc8 ("mm/madvise: add cond_resched() in madvise_cold_or_pageout_pte_range()")
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Jiexun Wang <wangjiexun@tinylab.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When I did soft offline stress test, a machine was observed to crash with
the following message:
kernel BUG at include/linux/memcontrol.h:554!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 5 PID: 3837 Comm: hwpoison.sh Not tainted 6.7.0-next-20240112-00001-g8ecf3e7fb7c8-dirty #97
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
RIP: 0010:folio_memcg+0xaf/0xd0
Code: 10 5b 5d c3 cc cc cc cc 48 c7 c6 08 b1 f2 b2 48 89 ef e8 b4 c5 f8 ff 90 0f 0b 48 c7 c6 d0 b0 f2 b2 48 89 ef e8 a2 c5 f8 ff 90 <0f> 0b 48 c7 c6 08 b1 f2 b2 48 89 ef e8 90 c5 f8 ff 90 0f 0b 66 66
RSP: 0018:ffffb6c043657c98 EFLAGS: 00000296
RAX: 000000000000004b RBX: ffff932bc1d1e401 RCX: ffff933abfb5c908
RDX: 0000000000000000 RSI: 0000000000000027 RDI: ffff933abfb5c900
RBP: ffffea6f04019080 R08: ffffffffb3338ce8 R09: 0000000000009ffb
R10: 00000000000004dd R11: ffffffffb3308d00 R12: ffffea6f04019080
R13: ffffea6f04019080 R14: 0000000000000001 R15: ffffb6c043657da0
FS: 00007f6c60f6b740(0000) GS:ffff933abfb40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000559c3bc8b980 CR3: 0000000107f1c000 CR4: 00000000000006f0
Call Trace:
<TASK>
split_huge_page_to_list+0x4d/0x1380
try_to_split_thp_page+0x3a/0xf0
soft_offline_page+0x1ea/0x8a0
soft_offline_page_store+0x52/0x90
kernfs_fop_write_iter+0x118/0x1b0
vfs_write+0x30b/0x430
ksys_write+0x5e/0xe0
do_syscall_64+0xb0/0x1b0
entry_SYSCALL_64_after_hwframe+0x6d/0x75
RIP: 0033:0x7f6c60d14697
Code: 10 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
RSP: 002b:00007ffe9b72b8d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007f6c60d14697
RDX: 000000000000000c RSI: 0000559c3bc8b980 RDI: 0000000000000001
RBP: 0000559c3bc8b980 R08: 00007f6c60dd1460 R09: 000000007fffffff
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000000c
R13: 00007f6c60e1a780 R14: 00007f6c60e16600 R15: 00007f6c60e15a00
The problem is that page->mapping is overloaded with slab->slab_list or
slabs fields now, so slab pages could be taken as non-LRU movable pages if
field slabs contains PAGE_MAPPING_MOVABLE or slab_list->prev is set to
LIST_POISON2. These slab pages will be treated as thp later leading to
crash in split_huge_page_to_list().
Link: https://lkml.kernel.org/r/20240126065837.2100184-1-linmiaohe@huawei.com
Link: https://lkml.kernel.org/r/20240124084014.1772906-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Fixes: 130d4df57390 ("mm/sl[au]b: rearrange struct slab fields to allow larger rcu_head")
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In memcg_rstat_updated(), we iterate the memcg being updated and its
parents to update memcg->vmstats_percpu->stats_updates in the fast path
(i.e. no atomic updates). According to my math, this is 3 memory loads
(and potentially 3 cache misses) per memcg:
- Load the address of memcg->vmstats_percpu.
- Load vmstats_percpu->stats_updates (based on some percpu calculation).
- Load the address of the parent memcg.
Avoid most of the cache misses by caching a pointer from each struct
memcg_vmstats_percpu to its parent on the corresponding CPU. In this
case, for the first memcg we have 2 memory loads (same as above):
- Load the address of memcg->vmstats_percpu.
- Load vmstats_percpu->stats_updates (based on some percpu calculation).
Then for each additional memcg, we need a single load to get the
parent's stats_updates directly. This reduces the number of loads from
O(3N) to O(2+N) -- where N is the number of memcgs we need to iterate.
Additionally, stash a pointer to memcg->vmstats in each struct
memcg_vmstats_percpu such that we can access the atomic counter that all
CPUs fold into, memcg->vmstats->stats_updates.
memcg_should_flush_stats() is changed to memcg_vmstats_needs_flush() to
accept a struct memcg_vmstats pointer accordingly.
In struct memcg_vmstats_percpu, make sure both pointers together with
stats_updates live on the same cacheline. Finally, update
mem_cgroup_alloc() to take in a parent pointer and initialize the new
cache pointers on each CPU. The percpu loop in mem_cgroup_alloc() may
look concerning, but there are multiple similar loops in the cgroup
creation path (e.g. cgroup_rstat_init()), most of which are hidden
within alloc_percpu().
According to Oliver's testing [1], this fixes multiple 30-38%
regressions in vm-scalability, will-it-scale-tlb_flush2, and
will-it-scale-fallocate1. This comes at a cost of 2 more pointers per
CPU (<2KB on a machine with 128 CPUs).
[1] https://lore.kernel.org/lkml/ZbDJsfsZt2ITyo61@xsang-OptiPlex-9020/
[yosryahmed@google.com: fix struct memcg_vmstats_percpu size and alignment]
Link: https://lkml.kernel.org/r/20240203044612.1234216-1-yosryahmed@google.com
Link: https://lkml.kernel.org/r/20240124100023.660032-1-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Fixes: 8d59d2214c23 ("mm: memcg: make stats flushing threshold per-memcg")
Tested-by: kernel test robot <oliver.sang@intel.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202401221624.cb53a8ca-oliver.sang@intel.com
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit c33c794828f2 ("mm: ptep_get() conversion") converted all (non-arch)
call sites to use ptep_get() instead of doing a direct dereference of the
pte. Full rationale can be found in that commit's log.
Since then, UFFDIO_MOVE has been implemented which does 7 direct pte
dereferences. Let's fix those up to use ptep_get().
I've asserted in the past that there is no reliable automated mechanism to
catch these; I'm relying on a combination of Coccinelle (which throws up a
lot of false positives) and some compiler magic to force a compiler error
on dereference. But given the frequency with which new issues are coming
up, I'll add it to my todo list to try to find an automated solution.
Link: https://lkml.kernel.org/r/20240123141755.3836179-1-ryan.roberts@arm.com
Fixes: adef440691ba ("userfaultfd: UFFDIO_MOVE uABI")
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The detection of dirty-throttled tasks in blk-wbt has been subtly broken
since its beginning in 2016. Namely if we are doing cgroup writeback and
the throttled task is not in the root cgroup, balance_dirty_pages() will
set dirty_sleep for the non-root bdi_writeback structure. However
blk-wbt checks dirty_sleep only in the root cgroup bdi_writeback
structure. Thus detection of recently throttled tasks is not working in
this case (we noticed this when we switched to cgroup v2 and suddently
writeback was slow).
Since blk-wbt has no easy way to get to proper bdi_writeback and
furthermore its intention has always been to work on the whole device
rather than on individual cgroups, just move the dirty_sleep timestamp
from bdi_writeback to backing_dev_info. That fixes the checking for
recently throttled task and saves memory for everybody as a bonus.
CC: stable@vger.kernel.org
Fixes: b57d74aff9ab ("writeback: track if we're sleeping on progress in balance_dirty_pages()")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240123175826.21452-1-jack@suse.cz
[axboe: fixup indentation errors]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
