| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The difference between sc->nr_reclaimed and nr_reclaimed is computed three
times. Introduce a new variable to record the value, so it only needs to
be computed once.
Link: https://lkml.kernel.org/r/20230411061757.12041-1-haifeng.xu@shopee.com
Signed-off-by: Haifeng Xu <haifeng.xu@shopee.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
in __split_huge_pmd_locked()
No need to call maybe_mkwrite() to then wrprotect if the source PMD was not
writable.
It's worth nothing that this now allows for PTEs to be writable even if
the source PMD was not writable: if vma->vm_page_prot includes write
permissions.
As documented in commit 931298e103c2 ("mm/userfaultfd: rely on
vma->vm_page_prot in uffd_wp_range()"), any mechanism that intends to
have pages wrprotected (COW, writenotify, mprotect, uffd-wp, softdirty,
...) has to properly adjust vma->vm_page_prot upfront, to not include
write permissions. If vma->vm_page_prot includes write permissions, the
PTE/PMD can be writable as default.
This now mimics the handling in mm/migrate.c:remove_migration_pte() and in
mm/huge_memory.c:remove_migration_pmd(), which has been in place for a
long time (except that 96a9c287e25d ("mm/migrate: fix wrongly apply write
bit after mkdirty on sparc64") temporarily changed it).
Link: https://lkml.kernel.org/r/20230411142512.438404-7-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
splits on pmd""
This reverts commit 624a2c94f5b7 ("Partly revert "mm/thp: carry over dirty
bit when thp splits on pmd"") and the fixup in commit e833bc503405
("mm/thp: re-apply mkdirty for small pages after split").
Now that sparc64 mkdirty handling is fixed and no longer sets a PTE/PMD
writable that shouldn't be writable, let's revert the temporary fix and
remove the stale comment.
The mkdirty mm selftest still passes with this change on sparc64.
Note that loongarch handling was fixed in commit bf2f34a506e6 ("LoongArch:
Set _PAGE_DIRTY only if _PAGE_WRITE is set in {pmd,pte}_mkdirty()")
Link: https://lkml.kernel.org/r/20230411142512.438404-6-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
sparc64"
This reverts commit 96a9c287e25d ("mm/migrate: fix wrongly apply write bit
after mkdirty on sparc64").
Now that sparc64 mkdirty handling is fixed and no longer sets a PTE/PMD
writable that shouldn't be writable, let's revert the temporary fix.
The mkdirty mm selftest still passes with this change on sparc64.
Note that loongarch handling was fixed in commit bf2f34a506e6 ("LoongArch:
Set _PAGE_DIRTY only if _PAGE_WRITE is set in {pmd,pte}_mkdirty()").
Link: https://lkml.kernel.org/r/20230411142512.438404-5-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
storage-class-specifier to static
smatch reports
mm/backing-dev.c:266:1: warning: symbol
'dev_attr_min_bytes' was not declared. Should it be static?
mm/backing-dev.c:294:1: warning: symbol
'dev_attr_max_bytes' was not declared. Should it be static?
These variables are only used in one file so should be static.
Link: https://lkml.kernel.org/r/20230408141609.2703647-1-trix@redhat.com
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Convert mfill_atomic_pte_copy(), shmem_mfill_atomic_pte() and
mfill_atomic_pte() to take in a folio pointer.
Convert mfill_atomic() to use a folio. Convert page_kaddr to kaddr in
mfill_atomic().
Link: https://lkml.kernel.org/r/20230410133932.32288-7-zhangpeng362@huawei.com
Signed-off-by: ZhangPeng <zhangpeng362@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nanyong Sun <sunnanyong@huawei.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Replace copy_user_huge_page() with copy_user_large_folio().
copy_user_large_folio() does the same as copy_user_huge_page(), but takes
in folios instead of pages. Remove pages_per_huge_page from
copy_user_large_folio(), because we can get that from folio_nr_pages(dst).
Convert copy_user_gigantic_page() to take in folios.
Link: https://lkml.kernel.org/r/20230410133932.32288-6-zhangpeng362@huawei.com
Signed-off-by: ZhangPeng <zhangpeng362@huawei.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nanyong Sun <sunnanyong@huawei.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Convert hugetlb_mfill_atomic_pte() to take in a folio pointer instead of
a page pointer.
Convert mfill_atomic_hugetlb() to use a folio.
Link: https://lkml.kernel.org/r/20230410133932.32288-5-zhangpeng362@huawei.com
Signed-off-by: ZhangPeng <zhangpeng362@huawei.com>
Reviewed-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nanyong Sun <sunnanyong@huawei.com>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Replace copy_huge_page_from_user() with copy_folio_from_user().
copy_folio_from_user() does the same as copy_huge_page_from_user(), but
takes in a folio instead of a page.
Convert page_kaddr to kaddr in copy_folio_from_user() to do indenting
cleanup.
Link: https://lkml.kernel.org/r/20230410133932.32288-4-zhangpeng362@huawei.com
Signed-off-by: ZhangPeng <zhangpeng362@huawei.com>
Reviewed-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nanyong Sun <sunnanyong@huawei.com>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
kmap() and kmap_atomic() are being deprecated in favor of
kmap_local_page() which is appropriate for any thread local context.[1]
Let's replace the kmap() and kmap_atomic() with kmap_local_page() in
copy_huge_page_from_user(). When allow_pagefault is false, disable page
faults to prevent potential deadlock.[2]
[1] https://lore.kernel.org/all/20220813220034.806698-1-ira.weiny@intel.com/
[2] https://lkml.kernel.org/r/20221025220136.2366143-1-ira.weiny@intel.com
Link: https://lkml.kernel.org/r/20230410133932.32288-3-zhangpeng362@huawei.com
Signed-off-by: ZhangPeng <zhangpeng362@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nanyong Sun <sunnanyong@huawei.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "userfaultfd: convert userfaultfd functions to use folios",
v6.
This patch series converts several userfaultfd functions to use folios.
This patch (of 6):
Call vma_alloc_folio() directly instead of alloc_page_vma() and convert
page_kaddr to kaddr in mfill_atomic_pte_copy(). Removes several calls to
compound_head().
Link: https://lkml.kernel.org/r/20230410133932.32288-1-zhangpeng362@huawei.com
Link: https://lkml.kernel.org/r/20230410133932.32288-2-zhangpeng362@huawei.com
Signed-off-by: ZhangPeng <zhangpeng362@huawei.com>
Reviewed-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nanyong Sun <sunnanyong@huawei.com>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 700d2e9a36b9 ("mm, page_alloc: reduce page alloc/free sanity
checks") has introduced a new static key check_pages_enabled to control
when struct pages are sanity checked during allocation and freeing. Mel
Gorman suggested that free_tail_pages_check() could use this static key as
well, instead of relying on CONFIG_DEBUG_VM. That makes sense, so do
that. Also rename the function to free_tail_page_prepare() because it
works on a single tail page and has a struct page preparation component as
well as the optional checking component.
Also remove some unnecessary unlikely() within static_branch_unlikely()
statements that Mel pointed out for commit 700d2e9a36b9.
Link: https://lkml.kernel.org/r/20230405142840.11068-1-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Suggested-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Alexander Halbuer <halbuer@sra.uni-hannover.de>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If we end up with a writable migration entry that has the uffd-wp bit set,
we already messed up: the source PTE/PMD was writable, which means we
could have modified the page without notifying uffd first. Setting the
uffd-wp bit always implies converting migration entries to !writable
migration entries.
Commit 8f34f1eac382 ("mm/userfaultfd: fix uffd-wp special cases for
fork()") documents that "3. Forget to carry over uffd-wp bit for a write
migration huge pmd entry", but it doesn't really say why that should be
relevant.
So let's remove that code to avoid hiding an eventual underlying issue (in
the future, we might want to warn when creating writable migration entries
that have the uffd-wp bit set -- or even better when turning a PTE
writable that still has the uffd-wp bit set).
This now matches the handling for hugetlb migration entries in
hugetlb_change_protection().
In copy_huge_pmd()/copy_nonpresent_pte()/copy_hugetlb_page_range(), we
still transfer the uffd-bit also for writable migration entries, but
simply because we have unified handling for "writable" and
"readable-exclusive" migration entries, and we care about transferring the
uffd-wp bit for the latter.
Link: https://lkml.kernel.org/r/20230405160236.587705-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Since we have updated mlock to use folios, it's better to call
folios_put() instead of calling release_pages() directly.
Link: https://lkml.kernel.org/r/20230405161854.6931-2-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Using vma_lookup() verifies the address is contained in the found vma.
This results in easier to read the code.
Link: https://lkml.kernel.org/r/20230404094515.1883552-1-zhangpeng362@huawei.com
Signed-off-by: ZhangPeng <zhangpeng362@huawei.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
cgroups v1 has a unique way of setting up memory pressure notifications:
the user opens "memory.pressure_level" of the cgroup they want to monitor
for pressure, then open "cgroup.event_control" and write the fd (among
other things) to that file. memory.pressure_level has no other use,
specifically it does not support any read or write operations.
Consequently, no handlers are provided, and cgroup_file_mode() sets the
permissions to 000. However, to actually use the mechanism, the
subscribing user must have read access to the file and open the fd for
reading, see memcg_write_event_control().
This is all fine as long as the subscribing process runs as root and is
otherwise unconfined by further restrictions. However, if you add strict
access controls such as selinux, the permission bits will be enforced, and
opening memory.pressure_level for reading will fail, preventing the
process from subscribing, even as root.
To work around this issue, introduce a dummy read handler. When
memory.pressure_level is created, cgroup_file_mode() will notice the
existence of a handler, and therefore add read permissions to the file.
Link: https://lkml.kernel.org/r/20230404105900.2005-1-flosch@nutanix.com
Signed-off-by: Florian Schmidt <flosch@nutanix.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Make sure that collapse_file doesn't interfere with checking the uptodate
flag in the page cache by only inserting hpage into the page cache after
it has been updated and marked uptodate. This is achieved by simply not
replacing present pages with hpage when iterating over the target range.
The present pages are already locked, so replacing them with the locked
hpage before the collapse is finalized is unnecessary. However, it is
necessary to stop freezing the present pages after validating them, since
leaving long-term frozen pages in the page cache can lead to deadlocks.
Simply checking the reference count is sufficient to ensure that there are
no long-term references hanging around that would the collapse would
break. Similar to hpage, there is no reason that the present pages
actually need to be frozen in addition to being locked.
This fixes a race where folio_seek_hole_data would mistake hpage for an
fallocated but unwritten page. This race is visible to userspace via data
temporarily disappearing from SEEK_DATA/SEEK_HOLE. This also fixes a
similar race where pages could temporarily disappear from mincore.
Link: https://lkml.kernel.org/r/20230404120117.2562166-5-stevensd@google.com
Fixes: f3f0e1d2150b ("khugepaged: add support of collapse for tmpfs/shmem pages")
Signed-off-by: David Stevens <stevensd@chromium.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Make sure that collapse_file respects any userfaultfds registered with
MODE_MISSING. If userspace has any such userfaultfds registered, then for
any page which it knows to be missing, it may expect a
UFFD_EVENT_PAGEFAULT. This means collapse_file needs to be careful when
collapsing a shmem range would result in replacing an empty page with a
THP, to avoid breaking userfaultfd.
Synchronization when checking for userfaultfds in collapse_file is tricky
because the mmap locks can't be used to prevent races with the
registration of new userfaultfds. Instead, we provide synchronization by
ensuring that userspace cannot observe the fact that pages are missing
before we check for userfaultfds. Although this allows registration of a
userfaultfd to race with collapse_file, it ensures that userspace cannot
observe any pages transition from missing to present after such a race
occurs. This makes such a race indistinguishable to the collapse
occurring immediately before the userfaultfd registration.
The first step to provide this synchronization is to stop filling gaps
during the loop iterating over the target range, since the page cache lock
can be dropped during that loop. The second step is to fill the gaps with
XA_RETRY_ENTRY after the page cache lock is acquired the final time, to
avoid races with accesses to the page cache that only take the RCU read
lock.
The fact that we don't fill holes during the initial iteration means that
collapse_file now has to handle faults occurring during the collapse.
This is done by re-validating the number of missing pages after acquiring
the page cache lock for the final time.
This fix is targeted at khugepaged, but the change also applies to
MADV_COLLAPSE. MADV_COLLAPSE on a range with a userfaultfd will now
return EBUSY if there are any missing pages (instead of succeeding on
shmem and returning EINVAL on anonymous memory). There is also now a
window during MADV_COLLAPSE where a fault on a missing page will cause the
syscall to fail with EAGAIN.
The fact that intermediate page cache state can no longer be observed
before the rollback of a failed collapse is also technically a
userspace-visible change (via at least SEEK_DATA and SEEK_END), but it is
exceedingly unlikely that anything relies on being able to observe that
transient state.
Link: https://lkml.kernel.org/r/20230404120117.2562166-4-stevensd@google.com
Signed-off-by: David Stevens <stevensd@chromium.org>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add a rollback label to deal with failure, instead of continuously
checking for RESULT_SUCCESS, to make it easier to add more failure cases.
The refactoring also allows the collapse_file tracepoint to include hpage
on success (instead of NULL).
Link: https://lkml.kernel.org/r/20230404120117.2562166-3-stevensd@google.com
Signed-off-by: David Stevens <stevensd@chromium.org>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm/khugepaged: fixes for khugepaged+shmem", v6.
This series reworks collapse_file so that the intermediate state of the
collapse does not leak out of collapse_file. Although this makes
collapse_file a bit more complicated, it means that the rest of the
kernel doesn't have to deal with the unusual state. This directly fixes
races with both lseek and mincore.
This series also fixes the fact that khugepaged completely breaks
userfaultfd+shmem. The rework of collapse_file provides a convenient
place to check for registered userfaultfds without making the shmem
userfaultfd implementation care about khugepaged.
Finally, this series adds a lru_add_drain after swapping in shmem pages,
which makes the subsequent folio_isolate_lru significantly more likely to
succeed.
This patch (of 4):
Call lru_add_drain after swapping in shmem pages so that isolate_lru_page
is more likely to succeed.
Link: https://lkml.kernel.org/r/20230404120117.2562166-1-stevensd@google.com
Link: https://lkml.kernel.org/r/20230404120117.2562166-2-stevensd@google.com
Signed-off-by: David Stevens <stevensd@chromium.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Make collapse_file roll back when copying pages failed. More concretely:
- extract copying operations into a separate loop
- postpone the updates for nr_none until both scanning and copying
succeeded
- postpone joining small xarray entries until both scanning and copying
succeeded
- postpone the update operations to NR_XXX_THPS until both scanning and
copying succeeded
- for non-SHMEM file, roll back filemap_nr_thps_inc if scan succeeded but
copying failed
Tested manually:
0. Enable khugepaged on system under test. Mount tmpfs at /mnt/ramdisk.
1. Start a two-thread application. Each thread allocates a chunk of
non-huge memory buffer from /mnt/ramdisk.
2. Pick 4 random buffer address (2 in each thread) and inject
uncorrectable memory errors at physical addresses.
3. Signal both threads to make their memory buffer collapsible, i.e.
calling madvise(MADV_HUGEPAGE).
4. Wait and then check kernel log: khugepaged is able to recover from
poisoned pages by skipping them.
5. Signal both threads to inspect their buffer contents and make sure no
data corruption.
Link: https://lkml.kernel.org/r/20230329151121.949896-4-jiaqiyan@google.com
Signed-off-by: Jiaqi Yan <jiaqiyan@google.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: David Stevens <stevensd@chromium.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Tong Tiangen <tongtiangen@huawei.com>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Problem
=======
Memory DIMMs are subject to multi-bit flips, i.e. memory errors. As
memory size and density increase, the chances of and number of memory
errors increase. The increasing size and density of server RAM in the
data center and cloud have shown increased uncorrectable memory errors.
There are already mechanisms in the kernel to recover from uncorrectable
memory errors. This series of patches provides the recovery mechanism for
the particular kernel agent khugepaged when it collapses memory pages.
Impact
======
The main reason we chose to make khugepaged collapsing tolerant of memory
failures was its high possibility of accessing poisoned memory while
performing functionally optional compaction actions. Standard
applications typically don't have strict requirements on the size of its
pages. So they are given 4K pages by the kernel. The kernel is able to
improve application performance by either
1) giving applications 2M pages to begin with, or
2) collapsing 4K pages into 2M pages when possible.
This collapsing operation is done by khugepaged, a kernel agent that is
constantly scanning memory. When collapsing 4K pages into a 2M page, it
must copy the data from the 4K pages into a physically contiguous 2M page.
Therefore, as long as there exists one poisoned cache line in collapsible
4K pages, khugepaged will eventually access it. The current impact to
users is a machine check exception triggered kernel panic. However,
khugepaged’s compaction operations are not functionally required kernel
actions. Therefore making khugepaged tolerant to poisoned memory will
greatly improve user experience.
This patch series is for cases where khugepaged is the first guy that
detects the memory errors on the poisoned pages. IOW, the pages are not
known to have memory errors when khugepaged collapsing gets to them. In
our observation, this happens frequently when the huge page ratio of the
system is relatively low, which is fairly common in virtual machines
running on cloud.
Solution
========
As stated before, it is less desirable to crash the system only because
khugepaged accesses poisoned pages while it is collapsing 4K pages. The
high level idea of this patch series is to skip the group of pages
(usually 512 4K-size pages) once khugepaged finds one of them is poisoned,
as these pages have become ineligible to be collapsed.
We are also careful to unwind operations khuagepaged has performed before
it detects memory failures. For example, before copying and collapsing a
group of anonymous pages into a huge page, the source pages will be
isolated and their page table is unlinked from their PMD. These
operations need to be undone in order to ensure these pages are not
changed/lost from the perspective of other threads (both user and kernel
space). As for file backed memory pages, there already exists a rollback
case. This patch just extends it so that khugepaged also correctly rolls
back when it fails to copy poisoned 4K pages.
This patch (of 3):
Make __collapse_huge_page_copy return whether copying anonymous pages
succeeded, and make collapse_huge_page handle the return status.
Break existing PTE scan loop into two for-loops. The first loop copies
source pages into target huge page, and can fail gracefully when running
into memory errors in source pages. If copying all pages succeeds, the
second loop releases and clears up these normal pages. Otherwise, the
second loop rolls back the page table and page states by:
- re-establishing the original PTEs-to-PMD connection.
- releasing source pages back to their LRU list.
Tested manually:
0. Enable khugepaged on system under test.
1. Start a two-thread application. Each thread allocates a chunk of
non-huge anonymous memory buffer.
2. Pick 4 random buffer locations (2 in each thread) and inject
uncorrectable memory errors at corresponding physical addresses.
3. Signal both threads to make their memory buffer collapsible, i.e.
calling madvise(MADV_HUGEPAGE).
4. Wait and check kernel log: khugepaged is able to recover from poisoned
pages and skips collapsing them.
5. Signal both threads to inspect their buffer contents and make sure no
data corruption.
Link: https://lkml.kernel.org/r/20230329151121.949896-1-jiaqiyan@google.com
Link: https://lkml.kernel.org/r/20230329151121.949896-2-jiaqiyan@google.com
Signed-off-by: Jiaqi Yan <jiaqiyan@google.com>
Cc: David Stevens <stevensd@chromium.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Tong Tiangen <tongtiangen@huawei.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In some situations, we may end up calling memcg_rstat_updated() with a
value of 0, which means the stat was not actually updated. An example is
if we fail to reclaim any pages in shrink_folio_list().
Do not add the cgroup to the rstat updated tree in this case, to avoid
unnecessarily flushing it.
Link: https://lkml.kernel.org/r/20230330191801.1967435-9-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vasily Averin <vasily.averin@linux.dev>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Memory reclaim is a sleepable context. Flushing is an expensive operaiton
that scales with the number of cpus and the number of cgroups in the
system, so avoid doing it atomically unnecessarily. This can slow down
reclaim code if flushing stats is taking too long, but there is already
multiple cond_resched()'s in reclaim code.
Link: https://lkml.kernel.org/r/20230330191801.1967435-8-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vasily Averin <vasily.averin@linux.dev>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In workingset_refault(), we call
mem_cgroup_flush_stats_atomic_ratelimited() to read accurate stats within
an RCU read section and with sleeping disallowed. Move the call above the
RCU read section to make it non-atomic.
Flushing is an expensive operation that scales with the number of cpus and
the number of cgroups in the system, so avoid doing it atomically where
possible.
Since workingset_refault() is the only caller of
mem_cgroup_flush_stats_atomic_ratelimited(), just make it non-atomic, and
rename it to mem_cgroup_flush_stats_ratelimited().
Link: https://lkml.kernel.org/r/20230330191801.1967435-7-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vasily Averin <vasily.averin@linux.dev>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently, all contexts that flush memcg stats do so with sleeping not
allowed. Some of these contexts are perfectly safe to sleep in, such as
reading cgroup files from userspace or the background periodic flusher.
Flushing is an expensive operation that scales with the number of cpus and
the number of cgroups in the system, so avoid doing it atomically where
possible.
Refactor the code to make mem_cgroup_flush_stats() non-atomic (aka
sleepable), and provide a separate atomic version. The atomic version is
used in reclaim, refault, writeback, and in mem_cgroup_usage(). All other
code paths are left to use the non-atomic version. This includes
callbacks for userspace reads and the periodic flusher.
Since refault is the only caller of mem_cgroup_flush_stats_ratelimited(),
change it to mem_cgroup_flush_stats_atomic_ratelimited(). Reclaim and
refault code paths are modified to do non-atomic flushing in separate
later patches -- so it will eventually be changed back to
mem_cgroup_flush_stats_ratelimited().
Link: https://lkml.kernel.org/r/20230330191801.1967435-6-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vasily Averin <vasily.averin@linux.dev>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
As Johannes notes in [1], stats_flush_lock is currently used to:
(a) Protect updated to stats_flush_threshold.
(b) Protect updates to flush_next_time.
(c) Serializes calls to cgroup_rstat_flush() based on those ratelimits.
However:
1. stats_flush_threshold is already an atomic
2. flush_next_time is not atomic. The writer is locked, but the reader
is lockless. If the reader races with a flush, you could see this:
if (time_after(jiffies, flush_next_time))
spin_trylock()
flush_next_time = now + delay
flush()
spin_unlock()
spin_trylock()
flush_next_time = now + delay
flush()
spin_unlock()
which means we already can get flushes at a higher frequency than
FLUSH_TIME during races. But it isn't really a problem.
The reader could also see garbled partial updates if the compiler
decides to split the write, so it needs at least READ_ONCE and
WRITE_ONCE protection.
3. Serializing cgroup_rstat_flush() calls against the ratelimit
factors is currently broken because of the race in 2. But the race
is actually harmless, all we might get is the occasional earlier
flush. If there is no delta, the flush won't do much. And if there
is, the flush is justified.
So the lock can be removed all together. However, the lock also served
the purpose of preventing a thundering herd problem for concurrent
flushers, see [2]. Use an atomic instead to serve the purpose of
unifying concurrent flushers.
[1]https://lore.kernel.org/lkml/20230323172732.GE739026@cmpxchg.org/
[2]https://lore.kernel.org/lkml/20210716212137.1391164-2-shakeelb@google.com/
Link: https://lkml.kernel.org/r/20230330191801.1967435-5-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vasily Averin <vasily.averin@linux.dev>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently, the only context in which we can invoke an rstat flush from irq
context is through mem_cgroup_usage() on the root memcg when called from
memcg_check_events(). An rstat flush is an expensive operation that
should not be done in irq context, so do not flush stats and use the stale
stats in this case.
Arguably, usage threshold events are not reliable on the root memcg anyway
since its usage is ill-defined.
Link: https://lkml.kernel.org/r/20230330191801.1967435-4-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Suggested-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vasily Averin <vasily.averin@linux.dev>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
mem_cgroup_flush_stats_delayed() suggests his is using a delayed_work, but
this is actually sometimes flushing directly from the callsite.
What it's doing is ratelimited calls. A better name would be
mem_cgroup_flush_stats_ratelimited().
Link: https://lkml.kernel.org/r/20230330191801.1967435-3-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vasily Averin <vasily.averin@linux.dev>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "memcg: avoid flushing stats atomically where possible", v3.
rstat flushing is an expensive operation that scales with the number of
cpus and the number of cgroups in the system. The purpose of this series
is to minimize the contexts where we flush stats atomically.
Patches 1 and 2 are cleanups requested during reviews of prior versions of
this series.
Patch 3 makes sure we never try to flush from within an irq context.
Patches 4 to 7 introduce separate variants of mem_cgroup_flush_stats() for
atomic and non-atomic flushing, and make sure we only flush the stats
atomically when necessary.
Patch 8 is a slightly tangential optimization that limits the work done by
rstat flushing in some scenarios.
This patch (of 8):
cgroup_rstat_flush_irqsafe() can be a confusing name. It may read as
"irqs are disabled throughout", which is what the current implementation
does (currently under discussion [1]), but is not the intention. The
intention is that this function is safe to call from atomic contexts.
Name it as such.
Link: https://lkml.kernel.org/r/20230330191801.1967435-1-yosryahmed@google.com
Link: https://lkml.kernel.org/r/20230330191801.1967435-2-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vasily Averin <vasily.averin@linux.dev>
Cc: Zefan Li <lizefan.x@bytedance.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In __kfence_alloc() and __kfence_free(), we will set and check canary.
Assuming that the size of the object is close to 0, nearly 4k memory
accesses are required because setting and checking canary is executed byte
by byte.
canary is now defined like this:
KFENCE_CANARY_PATTERN(addr) ((u8)0xaa ^ (u8)((unsigned long)(addr) & 0x7))
Observe that canary is only related to the lower three bits of the
address, so every 8 bytes of canary are the same. We can access 8-byte
canary each time instead of byte-by-byte, thereby optimizing nearly 4k
memory accesses to 4k/8 times.
Use the bcc tool funclatency to measure the latency of __kfence_alloc()
and __kfence_free(), the numbers (deleted the distribution of latency) is
posted below. Though different object sizes will have an impact on the
measurement, we ignore it for now and assume the average object size is
roughly equal.
Before patching:
__kfence_alloc:
avg = 5055 nsecs, total: 5515252 nsecs, count: 1091
__kfence_free:
avg = 5319 nsecs, total: 9735130 nsecs, count: 1830
After patching:
__kfence_alloc:
avg = 3597 nsecs, total: 6428491 nsecs, count: 1787
__kfence_free:
avg = 3046 nsecs, total: 3415390 nsecs, count: 1121
The numbers indicate that there is ~30% - ~40% performance improvement.
Link: https://lkml.kernel.org/r/20230403122738.6006-1-zhangpeng.00@bytedance.com
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Since some users may not use zswap, the zswap_pool is wasted. Save memory
by delaying the initialization of zswap until enabled.
[liushixin2@huawei.com: fix some pattern problem suggested by Christoph]
Link: https://lkml.kernel.org/r/20230411093632.822290-4-liushixin2@huawei.com
Link: https://lkml.kernel.org/r/20230403121318.1876082-4-liushixin2@huawei.com
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The zswap_init_started variable name has a bit confusing. Actually, there
are three state: uninitialized, initial failed and initial succeed. Add a
new variable zswap_init_state to replace zswap_init_{started/failed}.
Link: https://lkml.kernel.org/r/20230403121318.1876082-3-liushixin2@huawei.com
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Delay the initialization of zswap", v9.
In the initialization of zswap, about 18MB memory will be allocated for
zswap_pool. Since some users may not use zswap, the zswap_pool is wasted.
Save memory by delaying the initialization of zswap until enabled.
This patch (of 3):
Remove zswap_entry_cache_create and zswap_entry_cache_destroy and use
kmem_cache_* function directly.
Link: https://lkml.kernel.org/r/20230411093632.822290-1-liushixin2@huawei.com
Link: https://lkml.kernel.org/r/20230403121318.1876082-1-liushixin2@huawei.com
Link: https://lkml.kernel.org/r/20230403121318.1876082-2-liushixin2@huawei.com
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Short the name of the addr_to_vb_xarray() function to the addr_to_vb_xa().
This aligns with other internal function abbreviations.
Link: https://lkml.kernel.org/r/20230331073727.6968-1-urezki@gmail.com
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Suggested-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sony.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
kmemleak-test.c was moved to the samples directory in 1abbef4f51724
("mm,kmemleak-test.c: move kmemleak-test.c to samples dir").
If CONFIG_DEBUG_KMEMLEAK_TEST=m and CONFIG_SAMPLES is unset,
kmemleak-test.c will be unnecessarily compiled.
So move the entry for CONFIG_DEBUG_KMEMLEAK_TEST from mm/Kconfig and add a
new CONFIG_SAMPLE_KMEMLEAK in samples/ to control whether kmemleak-test.c
is built or not.
Link: https://lkml.kernel.org/r/20230330060904.292975-1-gehao@kylinos.cn
Fixes: 1abbef4f51724 ("mm,kmemleak-test.c: move kmemleak-test.c to samples dir")
Signed-off-by: Hao Ge <gehao@kylinos.cn>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Finn Behrens <me@kloenk.dev>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Tony Krowiak <akrowiak@linux.ibm.com>
Cc: Ye Xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
A global vmap_blocks-xarray array can be contented under heavy usage of
the vm_map_ram()/vm_unmap_ram() APIs. The lock_stat shows that a
"vmap_blocks.xa_lock" lock is a second in a top-list when it comes to
contentions:
<snip>
----------------------------------------
class name con-bounces contentions ...
----------------------------------------
vmap_area_lock: 2554079 2554276 ...
--------------
vmap_area_lock 1297948 [<00000000dd41cbaa>] alloc_vmap_area+0x1c7/0x910
vmap_area_lock 1256330 [<000000009d927bf3>] free_vmap_block+0x4a/0xe0
vmap_area_lock 1 [<00000000c95c05a7>] find_vm_area+0x16/0x70
--------------
vmap_area_lock 1738590 [<00000000dd41cbaa>] alloc_vmap_area+0x1c7/0x910
vmap_area_lock 815688 [<000000009d927bf3>] free_vmap_block+0x4a/0xe0
vmap_area_lock 1 [<00000000c1d619d7>] __get_vm_area_node+0xd2/0x170
vmap_blocks.xa_lock: 862689 862698 ...
-------------------
vmap_blocks.xa_lock 378418 [<00000000625a5626>] vm_map_ram+0x359/0x4a0
vmap_blocks.xa_lock 484280 [<00000000caa2ef03>] xa_erase+0xe/0x30
-------------------
vmap_blocks.xa_lock 576226 [<00000000caa2ef03>] xa_erase+0xe/0x30
vmap_blocks.xa_lock 286472 [<00000000625a5626>] vm_map_ram+0x359/0x4a0
...
<snip>
that is a result of running vm_map_ram()/vm_unmap_ram() in
a loop. The test creates 64(on 64 CPUs system) threads and
each one maps/unmaps 1 page.
After this change the "xa_lock" can be considered as a noise
in the same test condition:
<snip>
...
&xa->xa_lock#1: 10333 10394 ...
--------------
&xa->xa_lock#1 5349 [<00000000bbbc9751>] xa_erase+0xe/0x30
&xa->xa_lock#1 5045 [<0000000018def45d>] vm_map_ram+0x3a4/0x4f0
--------------
&xa->xa_lock#1 7326 [<0000000018def45d>] vm_map_ram+0x3a4/0x4f0
&xa->xa_lock#1 3068 [<00000000bbbc9751>] xa_erase+0xe/0x30
...
<snip>
Running the test_vmalloc.sh run_test_mask=1024 nr_threads=64 nr_pages=5
shows around ~8 percent of throughput improvement of vm_map_ram() and
vm_unmap_ram() APIs.
This patch does not fix vmap_area_lock/free_vmap_area_lock and
purge_vmap_area_lock bottle-necks, it is rather a separate rework.
Link: https://lkml.kernel.org/r/20230330190639.431589-1-urezki@gmail.com
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sony.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The free_area_empty() helper is only used inside mm/ so move it there to
reduce noise in include/linux/mmzone.h
Link: https://lkml.kernel.org/r/20230326160215.2674531-1-rppt@kernel.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Suggested-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
After commit 446ec83805dd ("mm/page_alloc: use might_alloc()") and commit
84172f4bb752 ("mm/page_alloc: combine __alloc_pages and
__alloc_pages_nodemask"), the comment is no longer accurate. Flag
'__GFP_DIRECT_RECLAIM' is clear enough on its own, so remove the comment
rather than update it.
Link: https://lkml.kernel.org/r/20230327034149.942-1-thunder.leizhen@huawei.com
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Sidhartha Kumar removed the last caller of PageHeadHuge(), so we can now
remove it and make folio_test_hugetlb() the real implementation. Add
kernel-doc for folio_test_hugetlb().
Link: https://lkml.kernel.org/r/20230327151050.1787744-1-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Leonardo Bras has noticed that pcp charge cache draining might be
disruptive on workloads relying on 'isolated cpus', a feature commonly
used on workloads that are sensitive to interruption and context switching
such as vRAN and Industrial Control Systems.
There are essentially two ways how to approach the issue. We can either
allow the pcp cache to be drained on a different rather than a local cpu
or avoid remote flushing on isolated cpus.
The current pcp charge cache is really optimized for high performance and
it always relies to stick with its cpu. That means it only requires
local_lock (preempt_disable on !RT) and draining is handed over to pcp WQ
to drain locally again.
The former solution (remote draining) would require to add an additional
locking to prevent local charges from racing with the draining. This adds
an atomic operation to otherwise simple arithmetic fast path in the
try_charge path. Another concern is that the remote draining can cause a
lock contention for the isolated workloads and therefore interfere with it
indirectly via user space interfaces.
Another option is to avoid draining scheduling on isolated cpus
altogether. That means that those remote cpus would keep their charges
even after drain_all_stock returns. This is certainly not optimal either
but it shouldn't really cause any major problems. In the worst case (many
isolated cpus with charges - each of them with MEMCG_CHARGE_BATCH i.e 64
page) the memory consumption of a memcg would be artificially higher than
can be immediately used from other cpus.
Theoretically a memcg OOM killer could be triggered pre-maturely.
Currently it is not really clear whether this is a practical problem
though. Tight memcg limit would be really counter productive to cpu
isolated workloads pretty much by definition because any memory reclaimed
induced by memcg limit could break user space timing expectations as those
usually expect execution in the userspace most of the time.
Also charges could be left behind on memcg removal. Any future charge on
those isolated cpus will drain that pcp cache so this won't be a permanent
leak.
Considering cons and pros of both approaches this patch is implementing
the second option and simply do not schedule remote draining if the target
cpu is isolated. This solution is much more simpler. It doesn't add any
new locking and it is more more predictable from the user space POV.
Should the pre-mature memcg OOM become a real life problem, we can revisit
this decision.
[akpm@linux-foundation.org: memcontrol.c needs sched/isolation.h]
Link: https://lore.kernel.org/oe-kbuild-all/202303180617.7E3aIlHf-lkp@intel.com/
Link: https://lkml.kernel.org/r/20230317134448.11082-3-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Suggested-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Reported-by: Leonardo Bras <leobras@redhat.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Syzkaller reported the following issue:
kernel BUG at mm/khugepaged.c:1823!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 1 PID: 5097 Comm: syz-executor220 Not tainted 6.2.0-syzkaller-13154-g857f1268a591 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/16/2023
RIP: 0010:collapse_file mm/khugepaged.c:1823 [inline]
RIP: 0010:hpage_collapse_scan_file+0x67c8/0x7580 mm/khugepaged.c:2233
Code: 00 00 89 de e8 c9 66 a3 ff 31 ff 89 de e8 c0 66 a3 ff 45 84 f6 0f 85 28 0d 00 00 e8 22 64 a3 ff e9 dc f7 ff ff e8 18 64 a3 ff <0f> 0b f3 0f 1e fa e8 0d 64 a3 ff e9 93 f6 ff ff f3 0f 1e fa 4c 89
RSP: 0018:ffffc90003dff4e0 EFLAGS: 00010093
RAX: ffffffff81e95988 RBX: 00000000000001c1 RCX: ffff8880205b3a80
RDX: 0000000000000000 RSI: 00000000000001c0 RDI: 00000000000001c1
RBP: ffffc90003dff830 R08: ffffffff81e90e67 R09: fffffbfff1a433c3
R10: 0000000000000000 R11: dffffc0000000001 R12: 0000000000000000
R13: ffffc90003dff6c0 R14: 00000000000001c0 R15: 0000000000000000
FS: 00007fdbae5ee700(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fdbae6901e0 CR3: 000000007b2dd000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
madvise_collapse+0x721/0xf50 mm/khugepaged.c:2693
madvise_vma_behavior mm/madvise.c:1086 [inline]
madvise_walk_vmas mm/madvise.c:1260 [inline]
do_madvise+0x9e5/0x4680 mm/madvise.c:1439
__do_sys_madvise mm/madvise.c:1452 [inline]
__se_sys_madvise mm/madvise.c:1450 [inline]
__x64_sys_madvise+0xa5/0xb0 mm/madvise.c:1450
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The xas_store() call during page cache scanning can potentially translate
'xas' into the error state (with the reproducer provided by the syzkaller
the error code is -ENOMEM). However, there are no further checks after
the 'xas_store', and the next call of 'xas_next' at the start of the
scanning cycle doesn't increase the xa_index, and the issue occurs.
This patch will add the xarray state error checking after the xas_store()
and the corresponding result error code.
Tested via syzbot.
[akpm@linux-foundation.org: update include/trace/events/huge_memory.h's SCAN_STATUS]
Link: https://lkml.kernel.org/r/20230329145330.23191-1-ivan.orlov0322@gmail.com
Link: https://syzkaller.appspot.com/bug?id=7d6bb3760e026ece7524500fe44fb024a0e959fc
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Reported-by: syzbot+9578faa5475acb35fa50@syzkaller.appspotmail.com
Tested-by: Zach O'Keefe <zokeefe@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Himadri Pandya <himadrispandya@gmail.com>
Cc: Ivan Orlov <ivan.orlov0322@gmail.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The current implementation of the compaction loop fails to set the source
zspage pointer to NULL in all cases, leading to a potential issue where
__zs_compact() could use a stale zspage pointer. This pointer could even
point to a previously freed zspage, causing unexpected behavior in the
putback_zspage() and migrate_write_unlock() functions after returning from
the compaction loop.
Address the issue by ensuring that the source zspage pointer is always set
to NULL when it should be.
Link: https://lkml.kernel.org/r/20230417130850.1784777-1-senozhatsky@chromium.org
Fixes: 5a845e9f2d66 ("zsmalloc: rework compaction algorithm")
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reported-by: Yu Zhao <yuzhao@google.com>
Tested-by: Yu Zhao <yuzhao@google.com>
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
clang produces a build failure on x86 for some randconfig builds after a
change that moves around code to mm/mm_init.c:
Cannot find symbol for section 2: .text.
mm/mm_init.o: failed
I have not been able to figure out why this happens, but the __weak
annotation on arch_has_descending_max_zone_pfns() is the trigger here.
Removing the weak function in favor of an open-coded Kconfig option check
avoids the problem and becomes clearer as well as better to optimize by
the compiler.
[arnd@arndb.de: fix logic bug]
Link: https://lkml.kernel.org/r/20230415081904.969049-1-arnd@kernel.org
Link: https://lkml.kernel.org/r/20230414080418.110236-1-arnd@kernel.org
Fixes: 9420f89db2dd ("mm: move most of core MM initialization to mm/mm_init.c")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: SeongJae Park <sj@kernel.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
23baf831a32c ("mm, treewide: redefine MAX_ORDER sanely") results in
various boot failures (hang) on arm targets Debug messages reveal the
reason.
########### MAX_ORDER=10 start=0 __ffs(start)=-1 min()=10 min_t=-1
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
If start==0, __ffs(start) returns 0xfffffff or (as int) -1, which min_t()
interprets as such, while min() apparently uses the returned unsigned long
value. Obviously a negative order isn't received well by the rest of the
code.
[akpm@linux-foundation.org: fix comment, per Mike]
Link: https://lkml.kernel.org/r/ZDBa7HWZK69dKKzH@kernel.org
Link: https://lkml.kernel.org/r/20230406072529.vupqyrzqnhyozeyh@box.shutemov.name
Fixes: 23baf831a32c ("mm, treewide: redefine MAX_ORDER sanely")
Signed-off-by: "Kirill A. Shutemov" <kirill@shutemov.name>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lkml.kernel.org/r/9460377a-38aa-4f39-ad57-fb73725f92db@roeck-us.net
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
|
|
A bug was reported by Yuanxi Liu where allocating 1G pages at runtime is
taking an excessive amount of time for large amounts of memory. Further
testing allocating huge pages that the cost is linear i.e. if allocating
1G pages in batches of 10 then the time to allocate nr_hugepages from
10->20->30->etc increases linearly even though 10 pages are allocated at
each step. Profiles indicated that much of the time is spent checking the
validity within already existing huge pages and then attempting a
migration that fails after isolating the range, draining pages and a whole
lot of other useless work.
Commit eb14d4eefdc4 ("mm,page_alloc: drop unnecessary checks from
pfn_range_valid_contig") removed two checks, one which ignored huge pages
for contiguous allocations as huge pages can sometimes migrate. While
there may be value on migrating a 2M page to satisfy a 1G allocation, it's
potentially expensive if the 1G allocation fails and it's pointless to try
moving a 1G page for a new 1G allocation or scan the tail pages for valid
PFNs.
Reintroduce the PageHuge check and assume any contiguous region with
hugetlbfs pages is unsuitable for a new 1G allocation.
The hpagealloc test allocates huge pages in batches and reports the
average latency per page over time. This test happens just after boot
when fragmentation is not an issue. Units are in milliseconds.
hpagealloc
6.3.0-rc6 6.3.0-rc6 6.3.0-rc6
vanilla hugeallocrevert-v1r1 hugeallocsimple-v1r2
Min Latency 26.42 ( 0.00%) 5.07 ( 80.82%) 18.94 ( 28.30%)
1st-qrtle Latency 356.61 ( 0.00%) 5.34 ( 98.50%) 19.85 ( 94.43%)
2nd-qrtle Latency 697.26 ( 0.00%) 5.47 ( 99.22%) 20.44 ( 97.07%)
3rd-qrtle Latency 972.94 ( 0.00%) 5.50 ( 99.43%) 20.81 ( 97.86%)
Max-1 Latency 26.42 ( 0.00%) 5.07 ( 80.82%) 18.94 ( 28.30%)
Max-5 Latency 82.14 ( 0.00%) 5.11 ( 93.78%) 19.31 ( 76.49%)
Max-10 Latency 150.54 ( 0.00%) 5.20 ( 96.55%) 19.43 ( 87.09%)
Max-90 Latency 1164.45 ( 0.00%) 5.53 ( 99.52%) 20.97 ( 98.20%)
Max-95 Latency 1223.06 ( 0.00%) 5.55 ( 99.55%) 21.06 ( 98.28%)
Max-99 Latency 1278.67 ( 0.00%) 5.57 ( 99.56%) 22.56 ( 98.24%)
Max Latency 1310.90 ( 0.00%) 8.06 ( 99.39%) 26.62 ( 97.97%)
Amean Latency 678.36 ( 0.00%) 5.44 * 99.20%* 20.44 * 96.99%*
6.3.0-rc6 6.3.0-rc6 6.3.0-rc6
vanilla revert-v1 hugeallocfix-v2
Duration User 0.28 0.27 0.30
Duration System 808.66 17.77 35.99
Duration Elapsed 830.87 18.08 36.33
The vanilla kernel is poor, taking up to 1.3 second to allocate a huge
page and almost 10 minutes in total to run the test. Reverting the
problematic commit reduces it to 8ms at worst and the patch takes 26ms.
This patch fixes the main issue with skipping huge pages but leaves the
page_count() out because a page with an elevated count potentially can
migrate.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=217022
Link: https://lkml.kernel.org/r/20230414141429.pwgieuwluxwez3rj@techsingularity.net
Fixes: eb14d4eefdc4 ("mm,page_alloc: drop unnecessary checks from pfn_range_valid_contig")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reported-by: Yuanxi Liu <y.liu@naruida.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The maple tree limits the gap returned to a window that specifically fits
what was asked. This may not be optimal in the case of switching search
directions or a gap that does not satisfy the requested space for other
reasons. Fix the search by retrying the operation and limiting the search
window in the rare occasion that a conflict occurs.
Link: https://lkml.kernel.org/r/20230414185919.4175572-1-Liam.Howlett@oracle.com
Fixes: 3499a13168da ("mm/mmap: use maple tree for unmapped_area{_topdown}")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Similarly to kmsan_vmap_pages_range_noflush(), kmsan_ioremap_page_range()
must also properly handle allocation/mapping failures. In the case of
such, it must clean up the already created metadata mappings and return an
error code, so that the error can be propagated to ioremap_page_range().
Without doing so, KMSAN may silently fail to bring the metadata for the
page range into a consistent state, which will result in user-visible
crashes when trying to access them.
Link: https://lkml.kernel.org/r/20230413131223.4135168-2-glider@google.com
Fixes: b073d7f8aee4 ("mm: kmsan: maintain KMSAN metadata for page operations")
Signed-off-by: Alexander Potapenko <glider@google.com>
Reported-by: Dipanjan Das <mail.dipanjan.das@gmail.com>
Link: https://lore.kernel.org/linux-mm/CANX2M5ZRrRA64k0hOif02TjmY9kbbO2aCBPyq79es34RXZ=cAw@mail.gmail.com/
Reviewed-by: Marco Elver <elver@google.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
As reported by Dipanjan Das, when KMSAN is used together with kernel fault
injection (or, generally, even without the latter), calls to kcalloc() or
__vmap_pages_range_noflush() may fail, leaving the metadata mappings for
the virtual mapping in an inconsistent state. When these metadata
mappings are accessed later, the kernel crashes.
To address the problem, we return a non-zero error code from
kmsan_vmap_pages_range_noflush() in the case of any allocation/mapping
failure inside it, and make vmap_pages_range_noflush() return an error if
KMSAN fails to allocate the metadata.
This patch also removes KMSAN_WARN_ON() from vmap_pages_range_noflush(),
as these allocation failures are not fatal anymore.
Link: https://lkml.kernel.org/r/20230413131223.4135168-1-glider@google.com
Fixes: b073d7f8aee4 ("mm: kmsan: maintain KMSAN metadata for page operations")
Signed-off-by: Alexander Potapenko <glider@google.com>
Reported-by: Dipanjan Das <mail.dipanjan.das@gmail.com>
Link: https://lore.kernel.org/linux-mm/CANX2M5ZRrRA64k0hOif02TjmY9kbbO2aCBPyq79es34RXZ=cAw@mail.gmail.com/
Reviewed-by: Marco Elver <elver@google.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
