summaryrefslogtreecommitdiff
path: root/net/batman-adv
AgeCommit message (Collapse)AuthorFilesLines
2018-06-23batman-adv: Fix multicast TT issues with bogus ROAM flagsLinus Lüssing1-2/+4
When a (broken) node wrongly sends multicast TT entries with a ROAM flag then this causes any receiving node to drop all entries for the same multicast MAC address announced by other nodes, leading to packet loss. Fix this DoS vector by only storing TT sync flags. For multicast TT non-sync'ing flag bits like ROAM are unused so far anyway. Fixes: 1d8ab8d3c176 ("batman-adv: Modified forwarding behaviour for multicast packets") Reported-by: Leonardo Mörlein <me@irrelefant.net> Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-06-23batman-adv: Avoid storing non-TT-sync flags on singular entries tooLinus Lüssing1-1/+2
Since commit 54e22f265e87 ("batman-adv: fix TT sync flag inconsistencies") TT sync flags and TT non-sync'd flags are supposed to be stored separately. The previous patch missed to apply this separation on a TT entry with only a single TT orig entry. This is a minor fix because with only a single TT orig entry the DDoS issue the former patch solves does not apply. Fixes: 54e22f265e87 ("batman-adv: fix TT sync flag inconsistencies") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-06-23batman-adv: Fix debugfs path for renamed softifSven Eckelmann3-6/+53
batman-adv is creating special debugfs directories in the init net_namespace for each created soft-interface (batadv net_device). But it is possible to rename a net_device to a completely different name then the original one. It can therefore happen that a user registers a new batadv net_device with the name "bat0". batman-adv is then also adding a new directory under $debugfs/batman-adv/ with the name "wlan0". The user then decides to rename this device to "bat1" and registers a different batadv device with the name "bat0". batman-adv will then try to create a directory with the name "bat0" under $debugfs/batman-adv/ again. But there already exists one with this name under this path and thus this fails. batman-adv will detect a problem and rollback the registering of this device. batman-adv must therefore take care of renaming the debugfs directories for soft-interfaces whenever it detects such a net_device rename. Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-06-23batman-adv: Fix debugfs path for renamed hardifSven Eckelmann3-0/+29
batman-adv is creating special debugfs directories in the init net_namespace for each valid hard-interface (net_device). But it is possible to rename a net_device to a completely different name then the original one. It can therefore happen that a user registers a new net_device which gets the name "wlan0" assigned by default. batman-adv is also adding a new directory under $debugfs/batman-adv/ with the name "wlan0". The user then decides to rename this device to "wl_pri" and registers a different device. The kernel may now decide to use the name "wlan0" again for this new device. batman-adv will detect it as a valid net_device and tries to create a directory with the name "wlan0" under $debugfs/batman-adv/. But there already exists one with this name under this path and thus this fails. batman-adv will detect a problem and rollback the registering of this device. batman-adv must therefore take care of renaming the debugfs directories for hard-interfaces whenever it detects such a net_device rename. Fixes: 5bc7c1eb44f2 ("batman-adv: add debugfs structure for information per interface") Reported-by: John Soros <sorosj@gmail.com> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-06-23batman-adv: Fix bat_v best gw refcnt after netlink dumpSven Eckelmann1-1/+3
A reference for the best gateway is taken when the list of gateways in the mesh is sent via netlink. This is necessary to check whether the currently dumped entry is the currently selected gateway or not. This information is then transferred as flag BATADV_ATTR_FLAG_BEST. After the comparison of the current entry is done, batadv_v_gw_dump_entry() has to decrease the reference counter again. Otherwise the reference will be held and thus prevents a proper shutdown of the batman-adv interfaces (and some of the interfaces enslaved in it). Fixes: b71bb6f924fe ("batman-adv: add B.A.T.M.A.N. V bat_gw_dump implementations") Signed-off-by: Sven Eckelmann <sven@narfation.org> Acked-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-06-23batman-adv: Fix bat_ogm_iv best gw refcnt after netlink dumpSven Eckelmann1-1/+3
A reference for the best gateway is taken when the list of gateways in the mesh is sent via netlink. This is necessary to check whether the currently dumped entry is the currently selected gateway or not. This information is then transferred as flag BATADV_ATTR_FLAG_BEST. After the comparison of the current entry is done, batadv_iv_gw_dump_entry() has to decrease the reference counter again. Otherwise the reference will be held and thus prevents a proper shutdown of the batman-adv interfaces (and some of the interfaces enslaved in it). Fixes: efb766af06e3 ("batman-adv: add B.A.T.M.A.N. IV bat_gw_dump implementations") Reported-by: Andreas Ziegler <dev@andreas-ziegler.de> Tested-by: Andreas Ziegler <dev@andreas-ziegler.de> Signed-off-by: Sven Eckelmann <sven@narfation.org> Acked-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-05-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-18/+68
Lots of easy overlapping changes in the confict resolutions here. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-14batman-adv: enable B.A.T.M.A.N. V compilation by defaultMarek Lindner1-1/+1
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Acked-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-05-14batman-adv: disable ethtool link speed detection when auto negotiation offMarek Lindner1-1/+14
Virtual interface drivers such as tun / tap interfaces, VLAN, etc tend to initialize the interface throughput with some value for the sake of having a throughput number to export via ethtool. This exported throughput leaves batman-adv to conclude the interface throughput is genuine (reflecting reality), thus no measurements are necessary. Based on the observation that those interface types also tend to set the link auto-negotiation to 'off', batman-adv shall check this setting to differentiate between genuine link throughput information and placeholders installed by virtual interfaces. The "default throughput" setting exported via sysfs still allows to configure the batman-adv throughput for the interface, thus disabling the measurements. Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Acked-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-05-12batman-adv: prevent TT request storms by not sending inconsistent TT TLVLsMarek Lindner1-3/+12
A translation table TVLV changset sent with an OGM consists of a number of headers (one per VLAN) plus the changeset itself (addition and/or deletion of entries). The per-VLAN headers are used by OGM recipients for consistency checks. Said consistency check might determine that a full translation table request is needed to restore consistency. If the TT sender adds per-VLAN headers of empty VLANs into the OGM, recipients are led to believe to have reached an inconsistent state and thus request a full table update. The full table does not contain empty VLANs (due to missing entries) the cycle restarts when the next OGM is issued. Consequently, when the translation table TVLV headers are composed, empty VLANs are to be excluded. Fixes: 21a57f6e7a3b ("batman-adv: make the TT CRC logic VLAN specific") Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-05-12batman-adv: Fix TT sync flags for intermediate TT responsesLinus Lüssing1-10/+51
The previous TT sync fix so far only fixed TT responses issued by the target node directly. So far, TT responses issued by intermediate nodes still lead to the wrong flags being added, leading to CRC mismatches. This behaviour was observed at Freifunk Hannover in a 800 nodes setup where a considerable amount of nodes were still infected with 'WI' TT flags even with (most) nodes having the previous TT sync fix applied. I was able to reproduce the issue with intermediate TT responses in a four node test setup and this patch fixes this issue by ensuring to use the per originator instead of the summarized, OR'd ones. Fixes: e9c00136a475 ("batman-adv: fix tt_global_entries flags update") Reported-by: Leonardo Mörlein <me@irrelefant.net> Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-05-10batman-adv: Avoid race in TT TVLV allocator helperSven Eckelmann1-4/+4
The functions batadv_tt_prepare_tvlv_local_data and batadv_tt_prepare_tvlv_global_data are responsible for preparing a buffer which can be used to store the TVLV container for TT and add the VLAN information to it. This will be done in three phases: 1. count the number of VLANs and their entries 2. allocate the buffer using the counters from the previous step and limits from the caller (parameter tt_len) 3. insert the VLAN information to the buffer The step 1 and 3 operate on a list which contains the VLANs. The access to these lists must be protected with an appropriate lock or otherwise they might operate on on different entries. This could for example happen when another context is adding VLAN entries to this list. This could lead to a buffer overflow in these functions when enough entries were added between step 1 and 3 to the VLAN lists that the buffer room for the entries (*tt_change) is smaller then the now required extra buffer for new VLAN entries. Fixes: 7ea7b4a14275 ("batman-adv: make the TT CRC logic VLAN specific") Signed-off-by: Sven Eckelmann <sven@narfation.org> Acked-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-04-25batman-adv: fix batadv_interface_tx()'s return typeLuc Van Oostenryck1-2/+2
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, but the implementation in this driver returns an 'int'. Fix this by returning 'netdev_tx_t' in this driver too. Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> [sven@narfation.org: fixed alignment] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-04-22batman-adv: Remove unused dentry without DEBUGFSSven Eckelmann1-0/+6
The debug_dir variable in the main structures is only accessed when CONFIG_BATMAN_ADV_DEBUGFS is enabled. It can be dropped to potentially save some bytes of memory. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-04-22batman-adv: Avoid bool in structuresSven Eckelmann1-7/+7
Using the bool type for structure member is considered inappropriate [1] for the kernel. Its size is not well defined (but usually 1 byte but maybe also 4 byte). [1] https://lkml.org/lkml/2017/11/21/384 Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-04-22batman-adv: Avoid old nodes disabling multicast optimizations completelyLinus Lüssing3-27/+6
Instead of disabling multicast optimizations mesh-wide once a node with no multicast optimizations capabilities joins the mesh, do the following: Just insert such nodes into the WANT_ALL_IPV4/IPV6 lists. This is sufficient to avoid multicast packet loss to such unsupportive nodes. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-04-22batman-adv: Disable CONFIG_BATMAN_ADV_DEBUGFS by defaultSven Eckelmann1-2/+2
All tools which were known to the batman-adv development team are supporting the batman-adv netlink interface since a while. Also debugfs is not supported for batman-adv interfaces in any non-default netns. Thus disabling CONFIG_BATMAN_ADV_DEBUGFS by default should not cause problems on most systems. It is still possible to enable it in case it is still required in a specific setup. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-04-22batman-adv: Start new development cycleSimon Wunderlich1-1/+1
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-04-22batman-adv: don't pass a NULL hard_iface to batadv_hardif_putColin Ian King1-1/+1
In the case where hard_iface is NULL, the error path may pass a null pointer to batadv_hardif_put causing a null pointer dereference error. Avoid this by only calling the function if hard_iface not null. Detected by CoverityScan, CID#1466456 ("Explicit null dereferenced") Fixes: 53dd9a68ba68 ("batman-adv: add multicast flags netlink support") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-04-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-3/+6
Minor conflicts in drivers/net/ethernet/mellanox/mlx5/core/en_rep.c, we had some overlapping changes: 1) In 'net' MLX5E_PARAMS_LOG_{SQ,RQ}_SIZE --> MLX5E_REP_PARAMS_LOG_{SQ,RQ}_SIZE 2) In 'net-next' params->log_rq_size is renamed to be params->log_rq_mtu_frames. 3) In 'net-next' params->hard_mtu is added. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-24batman-adv: fix packet loss for broadcasted DHCP packets to a serverLinus Lüssing1-1/+4
DHCP connectivity issues can currently occur if the following conditions are met: 1) A DHCP packet from a client to a server 2) This packet has a multicast destination 3) This destination has a matching entry in the translation table (FF:FF:FF:FF:FF:FF for IPv4, 33:33:00:01:00:02/33:33:00:01:00:03 for IPv6) 4) The orig-node determined by TT for the multicast destination does not match the orig-node determined by best-gateway-selection In this case the DHCP packet will be dropped. The "gateway-out-of-range" check is supposed to only be applied to unicasted DHCP packets to a specific DHCP server. In that case dropping the the unicasted frame forces the client to retry via a broadcasted one, but now directed to the new best gateway. A DHCP packet with broadcast/multicast destination is already ensured to always be delivered to the best gateway. Dropping a multicasted DHCP packet here will only prevent completing DHCP as there is no other fallback. So far, it seems the unicast check was implicitly performed by expecting the batadv_transtable_search() to return NULL for multicast destinations. However, a multicast address could have always ended up in the translation table and in fact is now common. To fix this potential loss of a DHCP client-to-server packet to a multicast address this patch adds an explicit multicast destination check to reliably bail out of the gateway-out-of-range check for such destinations. The issue and fix were tested in the following three node setup: - Line topology, A-B-C - A: gateway client, DHCP client - B: gateway server, hop-penalty increased: 30->60, DHCP server - C: gateway server, code modifications to announce FF:FF:FF:FF:FF:FF Without this patch, A would never transmit its DHCP Discover packet due to an always "out-of-range" condition. With this patch, a full DHCP handshake between A and B was possible again. Fixes: be7af5cf9cae ("batman-adv: refactoring gateway handling code") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-03-24batman-adv: fix multicast-via-unicast transmission with AP isolationLinus Lüssing1-2/+2
For multicast frames AP isolation is only supposed to be checked on the receiving nodes and never on the originating one. Furthermore, the isolation or wifi flag bits should only be intepreted as such for unicast and never multicast TT entries. By injecting flags to the multicast TT entry claimed by a single target node it was verified in tests that this multicast address becomes unreachable, leading to packet loss. Omitting the "src" parameter to the batadv_transtable_search() call successfully skipped the AP isolation check and made the target reachable again. Fixes: 1d8ab8d3c176 ("batman-adv: Modified forwarding behaviour for multicast packets") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-03-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller5-13/+20
Fun set of conflict resolutions here... For the mac80211 stuff, these were fortunately just parallel adds. Trivially resolved. In drivers/net/phy/phy.c we had a bug fix in 'net' that moved the function phy_disable_interrupts() earlier in the file, whilst in 'net-next' the phy_error() call from this function was removed. In net/ipv4/xfrm4_policy.c, David Ahern's changes to remove the 'rt_table_id' member of rtable collided with a bug fix in 'net' that added a new struct member "rt_mtu_locked" which needs to be copied over here. The mlxsw driver conflict consisted of net-next separating the span code and definitions into separate files, whilst a 'net' bug fix made some changes to that moved code. The mlx5 infiniband conflict resolution was quite non-trivial, the RDMA tree's merge commit was used as a guide here, and here are their notes: ==================== Due to bug fixes found by the syzkaller bot and taken into the for-rc branch after development for the 4.17 merge window had already started being taken into the for-next branch, there were fairly non-trivial merge issues that would need to be resolved between the for-rc branch and the for-next branch. This merge resolves those conflicts and provides a unified base upon which ongoing development for 4.17 can be based. Conflicts: drivers/infiniband/hw/mlx5/main.c - Commit 42cea83f9524 (IB/mlx5: Fix cleanup order on unload) added to for-rc and commit b5ca15ad7e61 (IB/mlx5: Add proper representors support) add as part of the devel cycle both needed to modify the init/de-init functions used by mlx5. To support the new representors, the new functions added by the cleanup patch needed to be made non-static, and the init/de-init list added by the representors patch needed to be modified to match the init/de-init list changes made by the cleanup patch. Updates: drivers/infiniband/hw/mlx5/mlx5_ib.h - Update function prototypes added by representors patch to reflect new function names as changed by cleanup patch drivers/infiniband/hw/mlx5/ib_rep.c - Update init/de-init stage list to match new order from cleanup patch ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22Merge tag 'batadv-next-for-davem-20180319' of ↵David S. Miller5-37/+522
git://git.open-mesh.org/linux-merge Simon Wunderlich says: ==================== This feature/cleanup patchset includes the following patches: - avoid redundant multicast TT entries, by Linus Luessing - add netlink support for distributed arp table cache and multicast flags, by Linus Luessing (2 patches) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-18batman-adv: Fix skbuff rcsum on packet rerouteSven Eckelmann1-5/+10
batadv_check_unicast_ttvn may redirect a packet to itself or another originator. This involves rewriting the ttvn and the destination address in the batadv unicast header. These field were not yet pulled (with skb rcsum update) and thus any change to them also requires a change in the receive checksum. Reported-by: Matthias Schiffer <mschiffer@universe-factory.net> Fixes: a73105b8d4c7 ("batman-adv: improved client announcement mechanism") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-03-18batman-adv: Add missing include for EPOLL* constantsSven Eckelmann2-0/+2
Fixes: a9a08845e9ac ("vfs: do bulk POLL* -> EPOLL* replacement") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-03-16batman-adv: fix header size check in batadv_dbg_arp()Matthias Schiffer1-1/+1
Checking for 0 is insufficient: when an SKB without a batadv header, but with a VLAN header is received, hdr_size will be 4, making the following code interpret the Ethernet header as a batadv header. Fixes: be1db4f6615b ("batman-adv: make the Distributed ARP Table vlan aware") Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-03-16batman-adv: update data pointers after skb_cow()Matthias Schiffer1-5/+5
batadv_check_unicast_ttvn() calls skb_cow(), so pointers into the SKB data must be (re)set after calling it. The ethhdr variable is dropped altogether. Fixes: 7cdcf6dddc42 ("batman-adv: add UNICAST_4ADDR packet type") Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-03-14batman-adv: add multicast flags netlink supportLinus Lüssing3-0/+267
Dump the list of multicast flags entries via the netlink socket. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-03-14batman-adv: add DAT cache netlink supportLinus Lüssing3-33/+203
Dump the list of DAT cache entries via the netlink socket. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-03-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller9-39/+50
All of the conflicts were cases of overlapping changes. In net/core/devlink.c, we have to make care that the resouce size_params have become a struct member rather than a pointer to such an object. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-04batman-adv: Avoid redundant multicast TT entriesLinus Lüssing1-4/+52
If a node signals that it wants all traffic for a specific protocol family then there is no need to announce individual multicast addresses via TT. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-03-04batman-adv: Fix multicast packet loss with a single WANT_ALL_IPV4/6 flagLinus Lüssing1-2/+2
As the kernel doc describes too the code is supposed to skip adding multicast TT entries if both the WANT_ALL_IPV4 and WANT_ALL_IPV6 flags are present. Unfortunately, the current code even skips adding multicast TT entries if only either the WANT_ALL_IPV4 or WANT_ALL_IPV6 is present. This could lead to IPv6 multicast packet loss if only an IGMP but not an MLD querier is present for instance or vice versa. Fixes: 687937ab3489 ("batman-adv: Add multicast optimization support for bridged setups") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-02-27batman-adv: Avoid relation operator comparison with boolSven Eckelmann1-1/+1
commit 785ea1144182 ("batman-adv: Distributed ARP Table - create DHT helper functions") introduced a return check of batadv_compare_eth which uses a boolean return value since commit 16af73458aca ("batman-adv: main, batadv_compare_eth return bool"). A relational (<, >, <= or >=) operator is not the right one for such a check. Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Sven Eckelmann <sven@narfation.org> Acked-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-02-27batman-adv: Fix indentation of batadv_seq_beforeSven Eckelmann1-5/+7
Also multiline macros should have their statements start on a tabstop. This was detected by checkpatch.pl after commit a134f8de9f40 ("checkpatch: improve the TABSTOP test to include declarations"). Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-02-26batman-adv: Update copyright years for 2018Sven Eckelmann59-59/+59
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-02-26batman-adv: Start new development cycleSimon Wunderlich1-1/+1
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-02-25batman-adv: Fix internal interface indices typesSven Eckelmann5-21/+31
batman-adv uses internal indices for each enabled and active interface. It is currently used by the B.A.T.M.A.N. IV algorithm to identifify the correct position in the ogm_cnt bitmaps. The type for the number of enabled interfaces (which defines the next interface index) was set to char. This type can be (depending on the architecture) either signed (limiting batman-adv to 127 active slave interfaces) or unsigned (limiting batman-adv to 255 active slave interfaces). This limit was not correctly checked when an interface was enabled and thus an overflow happened. This was only catched on systems with the signed char type when the B.A.T.M.A.N. IV code tried to resize its counter arrays with a negative size. The if_num interface index was only a s16 and therefore significantly smaller than the ifindex (int) used by the code net code. Both &batadv_hard_iface->if_num and &batadv_priv->num_ifaces must be (unsigned) int to support the same number of slave interfaces as the net core code. And the interface activation code must check the number of active slave interfaces to avoid integer overflows. Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-02-25batman-adv: Fix netlink dumping of BLA backbonesSven Eckelmann1-4/+7
The function batadv_bla_backbone_dump_bucket must be able to handle non-complete dumps of a single bucket. It tries to do that by saving the latest dumped index in *idx_skip to inform the caller about the current state. But the caller only assumes that buckets were not completely dumped when the return code is non-zero. This function must therefore also return a non-zero index when the dumping of an entry failed. Otherwise the caller will just skip all remaining buckets. And the function must also reset *idx_skip back to zero when it finished a bucket. Otherwise it will skip the same number of entries in the next bucket as the previous one had. Fixes: ea4152e11716 ("batman-adv: add backbone table netlink support") Reported-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-02-25batman-adv: Fix netlink dumping of BLA claimsSven Eckelmann1-4/+7
The function batadv_bla_claim_dump_bucket must be able to handle non-complete dumps of a single bucket. It tries to do that by saving the latest dumped index in *idx_skip to inform the caller about the current state. But the caller only assumes that buckets were not completely dumped when the return code is non-zero. This function must therefore also return a non-zero index when the dumping of an entry failed. Otherwise the caller will just skip all remaining buckets. And the function must also reset *idx_skip back to zero when it finished a bucket. Otherwise it will skip the same number of entries in the next bucket as the previous one had. Fixes: 04f3f5bf1883 ("batman-adv: add B.A.T.M.A.N. Dump BLA claims via netlink") Reported-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-02-25batman-adv: Ignore invalid batadv_v_gw during netlink sendSven Eckelmann1-1/+1
The function batadv_v_gw_dump stops the processing loop when batadv_v_gw_dump_entry returns a non-0 return code. This should only happen when the buffer is full. Otherwise, an empty message may be returned by batadv_gw_dump. This empty message will then stop the netlink dumping of gateway entries. At worst, not a single entry is returned to userspace even when plenty of possible gateways exist. Fixes: b71bb6f924fe ("batman-adv: add B.A.T.M.A.N. V bat_gw_dump implementations") Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-02-25batman-adv: Ignore invalid batadv_iv_gw during netlink sendSven Eckelmann1-1/+1
The function batadv_iv_gw_dump stops the processing loop when batadv_iv_gw_dump_entry returns a non-0 return code. This should only happen when the buffer is full. Otherwise, an empty message may be returned by batadv_gw_dump. This empty message will then stop the netlink dumping of gateway entries. At worst, not a single entry is returned to userspace even when plenty of possible gateways exist. Fixes: efb766af06e3 ("batman-adv: add B.A.T.M.A.N. IV bat_gw_dump implementations") Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-02-25batman-adv: invalidate checksum on fragment reassemblyMatthias Schiffer1-1/+2
A more sophisticated implementation could try to combine fragment checksums when all fragments have CHECKSUM_COMPLETE and are split at even offsets. For now, we just set ip_summed to CHECKSUM_NONE to avoid "hw csum failure" warnings in the kernel log when fragmented frames are received. In consequence, skb_pull_rcsum() can be replaced with skb_pull(). Note that in usual setups, packets don't reach batman-adv with CHECKSUM_COMPLETE (I assume NICs bail out of checksumming when they see batadv's ethtype?), which is why the log messages do not occur on every system using batman-adv. I could reproduce this issue by stacking batman-adv on top of a VXLAN interface. Fixes: 610bfc6bc99b ("batman-adv: Receive fragmented packets and merge") Tested-by: Maximilian Wilhelm <max@sdn.clinic> Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-02-25batman-adv: fix packet checksum in receive pathMatthias Schiffer1-7/+1
eth_type_trans() internally calls skb_pull(), which does not adjust the skb checksum; skb_postpull_rcsum() is necessary to avoid log spam of the form "bat0: hw csum failure" when packets with CHECKSUM_COMPLETE are received. Note that in usual setups, packets don't reach batman-adv with CHECKSUM_COMPLETE (I assume NICs bail out of checksumming when they see batadv's ethtype?), which is why the log messages do not occur on every system using batman-adv. I could reproduce this issue by stacking batman-adv on top of a VXLAN interface. Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol") Tested-by: Maximilian Wilhelm <max@sdn.clinic> Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-02-12vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds2-2/+2
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds60-1990/+2833
Pull networking updates from David Miller: 1) Significantly shrink the core networking routing structures. Result of http://vger.kernel.org/~davem/seoul2017_netdev_keynote.pdf 2) Add netdevsim driver for testing various offloads, from Jakub Kicinski. 3) Support cross-chip FDB operations in DSA, from Vivien Didelot. 4) Add a 2nd listener hash table for TCP, similar to what was done for UDP. From Martin KaFai Lau. 5) Add eBPF based queue selection to tun, from Jason Wang. 6) Lockless qdisc support, from John Fastabend. 7) SCTP stream interleave support, from Xin Long. 8) Smoother TCP receive autotuning, from Eric Dumazet. 9) Lots of erspan tunneling enhancements, from William Tu. 10) Add true function call support to BPF, from Alexei Starovoitov. 11) Add explicit support for GRO HW offloading, from Michael Chan. 12) Support extack generation in more netlink subsystems. From Alexander Aring, Quentin Monnet, and Jakub Kicinski. 13) Add 1000BaseX, flow control, and EEE support to mvneta driver. From Russell King. 14) Add flow table abstraction to netfilter, from Pablo Neira Ayuso. 15) Many improvements and simplifications to the NFP driver bpf JIT, from Jakub Kicinski. 16) Support for ipv6 non-equal cost multipath routing, from Ido Schimmel. 17) Add resource abstration to devlink, from Arkadi Sharshevsky. 18) Packet scheduler classifier shared filter block support, from Jiri Pirko. 19) Avoid locking in act_csum, from Davide Caratti. 20) devinet_ioctl() simplifications from Al viro. 21) More TCP bpf improvements from Lawrence Brakmo. 22) Add support for onlink ipv6 route flag, similar to ipv4, from David Ahern. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1925 commits) tls: Add support for encryption using async offload accelerator ip6mr: fix stale iterator net/sched: kconfig: Remove blank help texts openvswitch: meter: Use 64-bit arithmetic instead of 32-bit tcp_nv: fix potential integer overflow in tcpnv_acked r8169: fix RTL8168EP take too long to complete driver initialization. qmi_wwan: Add support for Quectel EP06 rtnetlink: enable IFLA_IF_NETNSID for RTM_NEWLINK ipmr: Fix ptrdiff_t print formatting ibmvnic: Wait for device response when changing MAC qlcnic: fix deadlock bug tcp: release sk_frag.page in tcp_disconnect ipv4: Get the address of interface correctly. net_sched: gen_estimator: fix lockdep splat net: macb: Handle HRESP error net/mlx5e: IPoIB, Fix copy-paste bug in flow steering refactoring ipv6: addrconf: break critical section in addrconf_verify_rtnl() ipv6: change route cache aging logic i40e/i40evf: Update DESC_NEEDED value to reflect larger value bnxt_en: cleanup DIM work on device shutdown ...
2018-01-31Merge branch 'misc.poll' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull poll annotations from Al Viro: "This introduces a __bitwise type for POLL### bitmap, and propagates the annotations through the tree. Most of that stuff is as simple as 'make ->poll() instances return __poll_t and do the same to local variables used to hold the future return value'. Some of the obvious brainos found in process are fixed (e.g. POLLIN misspelled as POLL_IN). At that point the amount of sparse warnings is low and most of them are for genuine bugs - e.g. ->poll() instance deciding to return -EINVAL instead of a bitmap. I hadn't touched those in this series - it's large enough as it is. Another problem it has caught was eventpoll() ABI mess; select.c and eventpoll.c assumed that corresponding POLL### and EPOLL### were equal. That's true for some, but not all of them - EPOLL### are arch-independent, but POLL### are not. The last commit in this series separates userland POLL### values from the (now arch-independent) kernel-side ones, converting between them in the few places where they are copied to/from userland. AFAICS, this is the least disruptive fix preserving poll(2) ABI and making epoll() work on all architectures. As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and it will trigger only on what would've triggered EPOLLWRBAND on other architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered at all on sparc. With this patch they should work consistently on all architectures" * 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits) make kernel-side POLL... arch-independent eventpoll: no need to mask the result of epi_item_poll() again eventpoll: constify struct epoll_event pointers debugging printk in sg_poll() uses %x to print POLL... bitmap annotate poll(2) guts 9p: untangle ->poll() mess ->si_band gets POLL... bitmap stored into a user-visible long field ring_buffer_poll_wait() return value used as return value of ->poll() the rest of drivers/*: annotate ->poll() instances media: annotate ->poll() instances fs: annotate ->poll() instances ipc, kernel, mm: annotate ->poll() instances net: annotate ->poll() instances apparmor: annotate ->poll() instances tomoyo: annotate ->poll() instances sound: annotate ->poll() instances acpi: annotate ->poll() instances crypto: annotate ->poll() instances block: annotate ->poll() instances x86: annotate ->poll() instances ...
2017-12-21batman-adv: Convert packet.h to uapi headerSven Eckelmann25-670/+24
The header file is used by different userspace programs to inject packets or to decode sniffed packets. It should therefore be available to them as userspace header. Also other components in the kernel (like the flow dissector) require access to the packet definitions to be able to decode ETH_P_BATMAN ethernet packets. Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-21batman-adv: Remove kernel fixed width types in packet.hSven Eckelmann1-107/+107
The uapi headers use the __u8/__u16/... version of the fixed width types instead of u8/u16/... The use of the latter must be avoided before packet.h is copied to include/uapi/linux/. Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-21batman-adv: Remove usage of BIT(x) in packet.hSven Eckelmann1-12/+11
The BIT(x) macro is no longer available for uapi headers because it is defined outside of it (linux/bitops.h). The use of it must therefore be avoided and replaced by an appropriate other representation. Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com> Signed-off-by: David S. Miller <davem@davemloft.net>