| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Consider existing BOUND & CONNECT state CIS to block CIG removal.
Otherwise, under suitable timing conditions we may attempt to remove CIG
while Create CIS is pending, which fails.
Fixes: 26afbd826ee3 ("Bluetooth: Add initial implementation of CIS connections")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Make CIG auto-allocation to select the first CIG_ID that is still
configurable. Also use correct CIG_ID range (see Core v5.3 Vol 4 Part E
Sec 7.8.97 p.2553).
Previously, it would always select CIG_ID 0 regardless of anything,
because cis_list with data.cis == 0xff (BT_ISO_QOS_CIS_UNSET) would not
count any CIS. Since we are not adding CIS here, use find_cis instead.
Fixes: 26afbd826ee3 ("Bluetooth: Add initial implementation of CIS connections")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
When looking for CIS blocking CIG removal, consider only the CIS with
the right CIG ID. Don't try to remove CIG with unset CIG ID.
Fixes: 26afbd826ee3 ("Bluetooth: Add initial implementation of CIS connections")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Currently, hci_conn_del calls hci_conn_unlink for BR/EDR, (e)SCO, and
CIS connections, i.e., everything except LE connections. However, if
(e)SCO connections are unlinked when BR/EDR disconnects, CIS connections
should also be unlinked when LE disconnects.
In terms of disconnection behavior, CIS and (e)SCO connections are not
too different. One peculiarity of CIS is that when CIS connections are
disconnected, the CIS handle isn't deleted, as per [BLUETOOTH CORE
SPECIFICATION Version 5.4 | Vol 4, Part E] 7.1.6 Disconnect command:
All SCO, eSCO, and CIS connections on a physical link should be
disconnected before the ACL connection on the same physical
connection is disconnected. If it does not, they will be
implicitly disconnected as part of the ACL disconnection.
...
Note: As specified in Section 7.7.5, on the Central, the handle
for a CIS remains valid even after disconnection and, therefore,
the Host can recreate a disconnected CIS at a later point in
time using the same connection handle.
Since hci_conn_link invokes both hci_conn_get and hci_conn_hold,
hci_conn_unlink should perform both hci_conn_put and hci_conn_drop as
well. However, currently it performs only hci_conn_put.
This patch makes hci_conn_unlink call hci_conn_drop as well, which
simplifies the logic in hci_conn_del a bit and may benefit future users
of hci_conn_unlink. But it is noted that this change additionally
implies that hci_conn_unlink can queue disc_work on conn itself, with
the following call stack:
hci_conn_unlink(conn) [conn->parent == NULL]
-> hci_conn_unlink(child) [child->parent == conn]
-> hci_conn_drop(child->parent)
-> queue_delayed_work(&conn->disc_work)
Queued disc_work after hci_conn_del can be spurious, so during the
process of hci_conn_del, it is necessary to make the call to
cancel_delayed_work(&conn->disc_work) after invoking hci_conn_unlink.
Signed-off-by: Ruihan Li <lrh2000@pku.edu.cn>
Co-developed-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Commit 06149746e720 ("Bluetooth: hci_conn: Add support for linking
multiple hcon") reintroduced a previously fixed bug [1] ("KASAN:
slab-use-after-free Read in hci_conn_hash_flush"). This bug was
originally fixed by commit 5dc7d23e167e ("Bluetooth: hci_conn: Fix
possible UAF").
The hci_conn_unlink function was added to avoid invalidating the link
traversal caused by successive hci_conn_del operations releasing extra
connections. However, currently hci_conn_unlink itself also releases
extra connections, resulted in the reintroduced bug.
This patch follows a more robust solution for cleaning up all
connections, by repeatedly removing the first connection until there are
none left. This approach does not rely on the inner workings of
hci_conn_del and ensures proper cleanup of all connections.
Meanwhile, we need to make sure that hci_conn_del never fails. Indeed it
doesn't, as it now always returns zero. To make this a bit clearer, this
patch also changes its return type to void.
Reported-by: syzbot+8bb72f86fc823817bc5d@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-bluetooth/000000000000aa920505f60d25ad@google.com/
Fixes: 06149746e720 ("Bluetooth: hci_conn: Add support for linking multiple hcon")
Signed-off-by: Ruihan Li <lrh2000@pku.edu.cn>
Co-developed-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
If hci_conn_put(conn->parent) reduces conn->parent's reference count to
zero, it can immediately deallocate conn->parent. At the same time,
conn->link->list has its head in conn->parent, causing use-after-free
problems in the latter list_del_rcu(&conn->link->list).
This problem can be easily solved by reordering the two operations,
i.e., first performing the list removal with list_del_rcu and then
decreasing the refcnt with hci_conn_put.
Reported-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Closes: https://lore.kernel.org/linux-bluetooth/CABBYNZ+1kce8_RJrLNOXd_8=Mdpb=2bx4Nto-hFORk=qiOkoCg@mail.gmail.com/
Fixes: 06149746e720 ("Bluetooth: hci_conn: Add support for linking multiple hcon")
Signed-off-by: Ruihan Li <lrh2000@pku.edu.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
The hci_conn_unlink function is being called by hci_conn_del, which
means it should not call hci_conn_del with the input parameter conn
again. If it does, conn may have already been released when
hci_conn_unlink returns, leading to potential UAF and double-free
issues.
This patch resolves the problem by modifying hci_conn_unlink to release
only conn's child links when necessary, but never release conn itself.
Reported-by: syzbot+690b90b14f14f43f4688@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-bluetooth/000000000000484a8205faafe216@google.com/
Fixes: 06149746e720 ("Bluetooth: hci_conn: Add support for linking multiple hcon")
Signed-off-by: Ruihan Li <lrh2000@pku.edu.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reported-by: syzbot+690b90b14f14f43f4688@syzkaller.appspotmail.com
Reported-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Reported-by: syzbot+8bb72f86fc823817bc5d@syzkaller.appspotmail.com
|
|
When submitting HCI_OP_LE_CREATE_CIS the code shall wait for
HCI_EVT_LE_CIS_ESTABLISHED thus enforcing the serialization of
HCI_OP_LE_CREATE_CIS as the Core spec does not allow to send them in
parallel:
BLUETOOTH CORE SPECIFICATION Version 5.3 | Vol 4, Part E page 2566:
If the Host issues this command before all the HCI_LE_CIS_Established
events from the previous use of the command have been generated, the
Controller shall return the error code Command Disallowed (0x0C).
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This fixes only matching CIS by address which prevents creating new hcon
if upper layer is requesting a specific CIS ID.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Since it is required for some configurations to have multiple CIS with
the same peer which is now covered by iso-tester in the following test
cases:
ISO AC 6(i) - Success
ISO AC 7(i) - Success
ISO AC 8(i) - Success
ISO AC 9(i) - Success
ISO AC 11(i) - Success
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Remove extra line setting the broadcast code parameter of the
hci_cp_le_create_big struct to 0. The broadcast code is copied
from the QoS struct.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Split bt_iso_qos into dedicated unicast and broadcast
structures and add additional broadcast parameters.
Fixes: eca0ae4aea66 ("Bluetooth: Add initial implementation of BIS connections")
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This fixes the following trace:
==================================================================
BUG: KASAN: slab-use-after-free in hci_conn_del+0xba/0x3a0
Write of size 8 at addr ffff88800208e9c8 by task iso-tester/31
CPU: 0 PID: 31 Comm: iso-tester Not tainted 6.3.0-rc2-g991aa4a69a47
#4716
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.1-2.fc36
04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x1d/0x70
print_report+0xce/0x610
? __virt_addr_valid+0xd4/0x150
? hci_conn_del+0xba/0x3a0
kasan_report+0xdd/0x110
? hci_conn_del+0xba/0x3a0
hci_conn_del+0xba/0x3a0
hci_conn_hash_flush+0xf2/0x120
hci_dev_close_sync+0x388/0x920
hci_unregister_dev+0x122/0x260
vhci_release+0x4f/0x90
__fput+0x102/0x430
task_work_run+0xf1/0x160
? __pfx_task_work_run+0x10/0x10
? mark_held_locks+0x24/0x90
exit_to_user_mode_prepare+0x170/0x180
syscall_exit_to_user_mode+0x19/0x50
do_syscall_64+0x4e/0x90
entry_SYSCALL_64_after_hwframe+0x70/0xda
Fixes: 0f00cd322d22 ("Bluetooth: Free potentially unfreed SCO connection")
Link: https://syzkaller.appspot.com/bug?extid=8bb72f86fc823817bc5d
Cc: <stable@vger.kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This fixes errors like bellow when LE Connection times out since that
is actually not a controller error:
Bluetooth: hci0: Opcode 0x200d failed: -110
Bluetooth: hci0: request failed to create LE connection: err -110
Instead the code shall properly detect if -ETIMEDOUT is returned and
send HCI_OP_LE_CREATE_CONN_CANCEL to give up on the connection.
Link: https://github.com/bluez/bluez/issues/340
Fixes: 8e8b92ee60de ("Bluetooth: hci_sync: Add hci_le_create_conn_sync")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
hci_connect_le_scan_cleanup shall always be invoked to cleanup the
states and re-enable passive scanning if necessary, otherwise it may
cause the pending action to stay active causing multiple attempts to
connect.
Fixes: 9b3628d79b46 ("Bluetooth: hci_sync: Cleanup hci_conn if it cannot be aborted")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
When sending LE create conn command, we set a timer with a duration of
HCI_LE_CONN_TIMEOUT before timing out and calling
create_le_conn_complete. Additionally, when receiving the command
complete, we also set a timer with the same duration to call
le_conn_timeout.
Usually the latter will be triggered first, which then sends a LE
create conn cancel command. However, due to the nature of racing, it
is possible for the former to be called first, thereby calling the
chain hci_conn_failed -> hci_conn_del -> cancel_delayed_work, thereby
preventing LE create conn cancel to be sent. In this situation, the
controller will be stuck in trying the LE connection.
This patch flushes le_conn_timeout on create_le_conn_complete to make
sure we always send LE create connection cancel, if necessary.
Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Ying Hsu <yinghsu@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
It is possible to initiate a SCO connection while deleting the
corresponding ACL connection, e.g. in below scenario:
(1) < hci setup sync connect command
(2) > hci disconn complete event (for the acl connection)
(3) > hci command complete event (for(1), failure)
When it happens, hci_cs_setup_sync_conn won't be able to obtain the
reference to the SCO connection, so it will be stuck and potentially
hinder subsequent connections to the same device.
This patch prevents that by also deleting the SCO connection if it is
still not established when the corresponding ACL connection is deleted.
Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Ying Hsu <yinghsu@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
The compiler thinks "conn" might be NULL after a call to hci_bind_bis(),
which cannot happen. Avoid any confusion by just making it not return a
value since it cannot fail. Fixes the warnings seen with GCC 13:
In function 'arch_atomic_dec_and_test',
inlined from 'atomic_dec_and_test' at ../include/linux/atomic/atomic-instrumented.h:576:9,
inlined from 'hci_conn_drop' at ../include/net/bluetooth/hci_core.h:1391:6,
inlined from 'hci_connect_bis' at ../net/bluetooth/hci_conn.c:2124:3:
../arch/x86/include/asm/rmwcc.h:37:9: warning: array subscript 0 is outside array bounds of 'atomic_t[0]' [-Warray-bounds=]
37 | asm volatile (fullop CC_SET(cc) \
| ^~~
...
In function 'hci_connect_bis':
cc1: note: source object is likely at address zero
Fixes: eca0ae4aea66 ("Bluetooth: Add initial implementation of BIS connections")
Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: linux-bluetooth@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
When hci_cmd_sync_queue() failed in hci_le_terminate_big() or
hci_le_big_terminate(), the memory pointed by variable d is not freed,
which will cause memory leak. Add release process to error path.
Fixes: eca0ae4aea66 ("Bluetooth: Add initial implementation of BIS connections")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
When attempting to connect multiple ISO sockets without using
DEFER_SETUP may result in the following crash:
BUG: KASAN: null-ptr-deref in hci_create_cis_sync+0x18b/0x2b0
Read of size 2 at addr 0000000000000036 by task kworker/u3:1/50
CPU: 0 PID: 50 Comm: kworker/u3:1 Not tainted
6.0.0-rc7-02243-gb84a13ff4eda #4373
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009),
BIOS 1.16.0-1.fc36 04/01/2014
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
<TASK>
dump_stack_lvl+0x19/0x27
kasan_report+0xbc/0xf0
? hci_create_cis_sync+0x18b/0x2b0
hci_create_cis_sync+0x18b/0x2b0
? get_link_mode+0xd0/0xd0
? __ww_mutex_lock_slowpath+0x10/0x10
? mutex_lock+0xe0/0xe0
? get_link_mode+0xd0/0xd0
hci_cmd_sync_work+0x111/0x190
process_one_work+0x427/0x650
worker_thread+0x87/0x750
? process_one_work+0x650/0x650
kthread+0x14e/0x180
? kthread_exit+0x50/0x50
ret_from_fork+0x22/0x30
</TASK>
Fixes: 26afbd826ee3 ("Bluetooth: Add initial implementation of CIS connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Replace kmalloc+memset by kzalloc
for better readability and simplicity.
This addresses the cocci warning below:
WARNING: kzalloc should be used for d, instead of kmalloc/memset
Signed-off-by: Kang Minchul <tegongkang@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Use kzalloc rather than duplicating its implementation, which makes code
simple and easy to understand.
./net/bluetooth/hci_conn.c:2038:6-13: WARNING: kzalloc should be used for cp, instead of kmalloc/memset.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2406
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
For ISO BIS related functions in hci_conn.c, make dst_type values be HCI
address type values, not ISO socket address type values. This makes it
consistent with CIS functions.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
When disconnecting an ISO link the controller may not generate
HCI_EV_NUM_COMP_PKTS for unacked packets which needs to be restored in
hci_conn_del otherwise the host would assume they are still in use and
would not be able to use all the buffers available.
Fixes: 26afbd826ee3 ("Bluetooth: Add initial implementation of CIS connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Frédéric Danis <frederic.danis@collabora.com>
|
|
hci_connect_cis and iso_connect_cis call hci_bind_cis inconsistently
with dst_type being either ISO socket address type or the HCI type, but
these values cannot be mixed like this. Fix this by using only the HCI
type.
CIS connection dst_type was also not initialized in hci_bind_cis, even
though it is used in hci_conn_hash_lookup_cis to find existing
connections. Set the value in hci_bind_cis, so that existing CIS
connections are found e.g. when doing deferred socket connections, also
when dst_type is not 0 (ADDR_LE_DEV_PUBLIC).
Fixes: 26afbd826ee3 ("Bluetooth: Add initial implementation of CIS connections")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
hci_abort_conn() is a wrapper around a number of DISCONNECT and
CREATE_CONN_CANCEL commands that was being invoked from hci_request
request queues, which are now deprecated. There are two versions:
hci_abort_conn() which can be invoked from the hci_event thread, and
hci_abort_conn_sync() which can be invoked within a hci_sync cmd chain.
Signed-off-by: Brian Gix <brian.gix@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Recoding HCI cmds to offload SCO codec to use hci_sync mechanism rather
than deprecated hci_request mechanism.
Signed-off-by: Brian Gix <brian.gix@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
BT_ISO_QOS has different semantics when it comes to QoS PHY as it uses
0x00 to disable a direction but that value is invalid over HCI and
sockets using DEFER_SETUP to connect may attempt to use hci_bind_cis
multiple times in order to detect if the parameters have changed, so to
fix the code will now just mirror the PHY for the parameters of
HCI_OP_LE_SET_CIG_PARAMS and will not update the PHY of the socket
leaving it disabled.
Fixes: 26afbd826ee32 ("Bluetooth: Add initial implementation of CIS connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This adds initial support for BIS/BIG which includes:
== Broadcaster role: Setup a periodic advertising and create a BIG ==
> tools/isotest -s 00:00:00:00:00:00
isotest[63]: Connected [00:00:00:00:00:00]
isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00]
isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02
RTN 2]
isotest[63]: Sending ...
isotest[63]: Number of packets: 1
isotest[63]: Socket jitter buffer: 80 buffer
< HCI Command: LE Set Perio.. (0x08|0x003e) plen 7
...
> HCI Event: Command Complete (0x0e) plen 4
LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Perio.. (0x08|0x003f) plen 7
...
> HCI Event: Command Complete (0x0e) plen 4
LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Perio.. (0x08|0x0040) plen 2
...
> HCI Event: Command Complete (0x0e) plen 4
LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1
Status: Success (0x00)
< HCI Command: LE Create B.. (0x08|0x0068) plen 31
...
> HCI Event: Command Status (0x0f) plen 4
LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1
Status: Success (0x00)
> HCI Event: LE Meta Event (0x3e) plen 21
LE Broadcast Isochronous Group Complete (0x1b)
...
== Broadcast Receiver role: Create a PA Sync and BIG Sync ==
> tools/isotest -i hci1 -d 00:AA:01:00:00:00
isotest[66]: Waiting for connection 00:AA:01:00:00:00...
< HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14
...
> HCI Event: Command Status (0x0f) plen 4
LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8
...
> HCI Event: Command Complete (0x0e) plen 4
LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6
...
> HCI Event: Command Complete (0x0e) plen 4
LE Set Extended Scan Enable (0x08|0x0042) ncmd 1
Status: Success (0x00)
> HCI Event: LE Meta Event (0x3e) plen 29
LE Extended Advertising Report (0x0d)
...
> HCI Event: LE Meta Event (0x3e) plen 16
LE Periodic Advertising Sync Established (0x0e)
...
< HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25
...
> HCI Event: Command Status (0x0f) plen 4
LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1
Status: Success (0x00)
> HCI Event: LE Meta Event (0x3e) plen 17
LE Broadcast Isochronous Group Sync Estabilished (0x1d)
...
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This adds the initial implementation of CIS connections and introduces
the ISO packets/links.
== Central: Set CIG Parameters, create a CIS and Setup Data Path ==
> tools/isotest -s <address>
< HCI Command: LE Extended Create... (0x08|0x0043) plen 26
...
> HCI Event: Command Status (0x0f) plen 4
LE Extended Create Connection (0x08|0x0043) ncmd 1
Status: Success (0x00)
> HCI Event: LE Meta Event (0x3e) plen 31
LE Enhanced Connection Complete (0x0a)
...
< HCI Command: LE Create Connected... (0x08|0x0064) plen 5
...
> HCI Event: Command Status (0x0f) plen 4
LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1
Status: Success (0x00)
> HCI Event: LE Meta Event (0x3e) plen 29
LE Connected Isochronous Stream Established (0x19)
...
< HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13
...
> HCI Event: Command Complete (0x0e) plen 6
LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1
Status: Success (0x00)
Handle: 257
< HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13
...
> HCI Event: Command Complete (0x0e) plen 6
LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1
Status: Success (0x00)
Handle: 257
== Peripheral: Accept CIS and Setup Data Path ==
> tools/isotest -d
HCI Event: LE Meta Event (0x3e) plen 7
LE Connected Isochronous Stream Request (0x1a)
...
< HCI Command: LE Accept Co.. (0x08|0x0066) plen 2
...
> HCI Event: LE Meta Event (0x3e) plen 29
LE Connected Isochronous Stream Established (0x19)
...
< HCI Command: LE Setup Is.. (0x08|0x006e) plen 13
...
> HCI Event: Command Complete (0x0e) plen 6
LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1
Status: Success (0x00)
Handle: 257
< HCI Command: LE Setup Is.. (0x08|0x006e) plen 13
...
> HCI Event: Command Complete (0x0e) plen 6
LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1
Status: Success (0x00)
Handle: 257
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
If a command cannot be sent or there is a internal error an errno maybe
set instead of a command status.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
If a hardware error occurs and the connections are flushed without a
disconnection_complete event being signaled, the temporary linkkeys are
not flushed.
This change ensures that any outstanding flushable linkkeys are flushed
when the connection are flushed from the hash table.
Additionally, this also makes use of test_and_clear_bit to avoid
multiple attempts to delete the link key that's already been flushed.
Signed-off-by: Alain Michaud <alainm@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
drivers/net/ethernet/cadence/macb_main.c
5cebb40bc955 ("net: macb: Fix PTP one step sync support")
138badbc21a0 ("net: macb: use NAPI for TX completion path")
https://lore.kernel.org/all/20220523111021.31489367@canb.auug.org.au/
net/smc/af_smc.c
75c1edf23b95 ("net/smc: postpone sk_refcnt increment in connect()")
3aba103006bc ("net/smc: align the connect behaviour with TCP")
https://lore.kernel.org/all/20220524114408.4bf1af38@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The handling of connection failures shall be handled by the request
completion callback as already done by hci_cs_le_create_conn, also make
sure to use hci_conn_failed instead of hci_le_conn_failed as the later
don't actually call hci_conn_del to cleanup.
Link: https://github.com/bluez/bluez/issues/340
Fixes: 8e8b92ee60de5 ("Bluetooth: hci_sync: Add hci_le_create_conn_sync")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This adds HCI_QUIRK_BROKEN_ENHANCED_SETUP_SYNC_CONN quirk which can be
used to mark HCI_Enhanced_Setup_Synchronous_Connection as broken even
if its support command bit are set since some controller report it as
supported but the command don't work properly with some configurations
(e.g. BT_VOICE_TRANSPARENT/mSBC).
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This attempts to cleanup the hci_conn if it cannot be aborted as
otherwise it would likely result in having the controller and host
stack out of sync with respect to connection handle.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
hci_le_conn_failed function's documentation says that the caller must
hold hdev->lock. The only callsite that does not hold that lock is
hci_le_conn_failed. The other 3 callsites hold the hdev->lock very
locally. The solution is to hold the lock during the call to
hci_le_conn_failed.
Fixes: 3c857757ef6e ("Bluetooth: Add directed advertising support through connect()")
Signed-off-by: Niels Dossche <dossche.niels@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
When one of the three connection complete events is received multiple
times for the same handle, the device is registered multiple times which
leads to memory corruptions. Therefore, consequent events for a single
connection are ignored.
The conn->state can hold different values, therefore HCI_CONN_HANDLE_UNSET
is introduced to identify new connections. To make sure the events do not
contain this or another invalid handle HCI_CONN_HANDLE_MAX and checks
are introduced.
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=215497
Signed-off-by: Soenke Huster <soenke.huster@eknoes.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This adds hci_le_create_conn_sync and make hci_le_connect use it instead
of queueing multiple commands which may conflict with the likes of
hci_update_passive_scan which uses hci_cmd_sync_queue.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This makes hci_suspend_notifier use the hci_*_sync which can be
executed synchronously which is allowed in the suspend_notifier and
simplifies a lot of the handling since the status of each command can
be checked inline so no other work need to be scheduled thus can be
performed without using of a state machine.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This make use of hci_cmd_sync_queue for MGMT_OP_START_DISCOVERY,
MGMT_OP_START_SERVICE_DISCOVERY and MGMT_OP_STOP_DISCOVERY to use
hci_cmd_sync_queue so they no longer depend on hdev->discov_update work
to send any commands.
Tested with:
tools/mgmt-tester -s "Start Discovery"
Test Summary
------------
Start Discovery - Not powered 1 Passed
Start Discovery - Invalid parameters 1 Passed
Start Discovery - Not supported 1 Passed
Start Discovery - Success 1 Passed
Start Discovery - Success 2 Passed
Start Discovery - Power Off 1 Passed
Start Discovery BREDR LE - (Ext Scan Enable) Passed
Start Discovery LE - (Ext Scan Enable) Passed
Start Discovery LE - (Ext Scan Param) Passed
Start Discovery - (2m, Scan Param) Passed
Start Discovery - (coded, Scan Param) Passed
Start Discovery - (1m, 2m, coded, Scan Param) Passed
LL Privacy - Start Discovery 1 (Disable RL) Passed
LL Privacy - Start Discovery 2 (Disable RL) Passed
Total: 14, Passed: 14 (100.0%), Failed: 0, Not Run: 0
tools/mgmt-tester -s "Start Service"
Test Summary
------------
Start Service Discovery - Not powered 1 Passed
Start Service Discovery - Invalid parameters 1 Passed
Start Service Discovery - Not supported 1 Passed
Start Service Discovery - Success 1 Passed
Start Service Discovery - Success 2 Passed
Total: 5, Passed: 5 (100.0%), Failed: 0, Not Run: 0
tools/mgmt-tester -s "Stop Discovery"
Test Summary
------------
Stop Discovery - Success 1 Passed
Stop Discovery - BR/EDR (Inquiry) Success 1 Passed
Stop Discovery - Rejected 1 Passed
Stop Discovery - Invalid parameters 1 Passed
Stop Discovery - (Ext Scan Disable) Passed
Total: 5, Passed: 5 (100.0%), Failed: 0, Not Run: 0
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This replaces the use of hci_update_background_scan with
hci_update_passive_scan which runs from cmd_work_sync and deal properly
with resolving list when LL privacy is enabled.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
In Enhanced_Setup_Synchronous_Command, add support for msbc
coding format
Signed-off-by: Kiran K <kiran.k@intel.com>
Reviewed-by: Chethan T N <chethan.tumkur.narayan@intel.com>
Reviewed-by: Srivatsa Ravishankar <ravishankar.srivatsa@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
For HFP offload use case, codec needs to be configured
before opening SCO connection. This patch sends
HCI_CONFIGURE_DATA_PATH command to configure doec before
opening SCO connection.
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
< HCI Command: Enhanced Setup Synchronous Connection (0x01|0x003d) plen 59
Handle: 256
Transmit bandwidth: 8000
Receive bandwidth: 8000
Max latency: 13
Packet type: 0x0380
3-EV3 may not be used
2-EV5 may not be used
3-EV5 may not be used
Retransmission effort: Optimize for link quality (0x02)
> HCI Event: Command Status (0x0f) plen 4
Enhanced Setup Synchronous Connection (0x01|0x003d) ncmd 1
Status: Success (0x00)
> HCI Event: Synchronous Connect Complete (0x2c) plen 17
Status: Success (0x00)
Handle: 257
Address: CC:98:8B:92:04:FD (SONY Visual Products Inc.)
Link type: eSCO (0x02)
Transmission interval: 0x0c
Retransmission window: 0x06
RX packet length: 60
TX packet length: 60
Air mode: Transparent (0x03)
Signed-off-by: Kiran K <kiran.k@intel.com>
Reviewed-by: Chethan T N <chethan.tumkur.narayan@intel.com>
Reviewed-by: Srivatsa Ravishankar <ravishankar.srivatsa@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
When connecting to a device using an RPA if the address has been
resolved by the controller (types 0x02 and 0x03) the identity address
shall be used as the actual RPA in the advertisement won't be visible
to the host.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This patch replaces some non-inclusive terms based on the appropriate
language mapping table compiled by the Bluetooth SIG:
https://specificationrefs.bluetooth.com/language-mapping/Appropriate_Language_Mapping_Table.pdf
Specifically, these terms are replaced:
master -> initiator (for smp) or central (everything else)
slave -> responder (for smp) or peripheral (everything else)
The #define preprocessor terms are unchanged for now to not disturb
dependent APIs.
Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This patch replaces some non-inclusive terms based on the appropriate
language mapping table compiled by the Bluetooth SIG:
https://specificationrefs.bluetooth.com/language-mapping/Appropriate_Language_Mapping_Table.pdf
Specifically, these terms are replaced when describing the
connectionless peripheral broadcast feature:
master -> central
slave -> peripheral
Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Fix some spelling mistakes in comments:
udpate ==> update
retreive ==> retrieve
accidentially ==> accidentally
correspondig ==> corresponding
adddress ==> address
estabilish ==> establish
commplete ==> complete
Unkown ==> Unknown
triggerd ==> triggered
transtion ==> transition
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit eab2404ba798 ("Bluetooth: Add BT_PHY socket option") added a
dependency between socket lock and hci_dev->lock that could lead to
deadlock.
It turns out that hci_conn_get_phy() is not in any way relying on hdev
being immutable during the runtime of this function, neither does it even
look at any of the members of hdev, and as such there is no need to hold
that lock.
This fixes the lockdep splat below:
======================================================
WARNING: possible circular locking dependency detected
5.12.0-rc1-00026-g73d464503354 #10 Not tainted
------------------------------------------------------
bluetoothd/1118 is trying to acquire lock:
ffff8f078383c078 (&hdev->lock){+.+.}-{3:3}, at: hci_conn_get_phy+0x1c/0x150 [bluetooth]
but task is already holding lock:
ffff8f07e831d920 (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+.}-{0:0}, at: l2cap_sock_getsockopt+0x8b/0x610
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #3 (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+.}-{0:0}:
lock_sock_nested+0x72/0xa0
l2cap_sock_ready_cb+0x18/0x70 [bluetooth]
l2cap_config_rsp+0x27a/0x520 [bluetooth]
l2cap_sig_channel+0x658/0x1330 [bluetooth]
l2cap_recv_frame+0x1ba/0x310 [bluetooth]
hci_rx_work+0x1cc/0x640 [bluetooth]
process_one_work+0x244/0x5f0
worker_thread+0x3c/0x380
kthread+0x13e/0x160
ret_from_fork+0x22/0x30
-> #2 (&chan->lock#2/1){+.+.}-{3:3}:
__mutex_lock+0xa3/0xa10
l2cap_chan_connect+0x33a/0x940 [bluetooth]
l2cap_sock_connect+0x141/0x2a0 [bluetooth]
__sys_connect+0x9b/0xc0
__x64_sys_connect+0x16/0x20
do_syscall_64+0x33/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
-> #1 (&conn->chan_lock){+.+.}-{3:3}:
__mutex_lock+0xa3/0xa10
l2cap_chan_connect+0x322/0x940 [bluetooth]
l2cap_sock_connect+0x141/0x2a0 [bluetooth]
__sys_connect+0x9b/0xc0
__x64_sys_connect+0x16/0x20
do_syscall_64+0x33/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
-> #0 (&hdev->lock){+.+.}-{3:3}:
__lock_acquire+0x147a/0x1a50
lock_acquire+0x277/0x3d0
__mutex_lock+0xa3/0xa10
hci_conn_get_phy+0x1c/0x150 [bluetooth]
l2cap_sock_getsockopt+0x5a9/0x610 [bluetooth]
__sys_getsockopt+0xcc/0x200
__x64_sys_getsockopt+0x20/0x30
do_syscall_64+0x33/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
other info that might help us debug this:
Chain exists of:
&hdev->lock --> &chan->lock#2/1 --> sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP);
lock(&chan->lock#2/1);
lock(sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP);
lock(&hdev->lock);
*** DEADLOCK ***
1 lock held by bluetoothd/1118:
#0: ffff8f07e831d920 (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+.}-{0:0}, at: l2cap_sock_getsockopt+0x8b/0x610 [bluetooth]
stack backtrace:
CPU: 3 PID: 1118 Comm: bluetoothd Not tainted 5.12.0-rc1-00026-g73d464503354 #10
Hardware name: LENOVO 20K5S22R00/20K5S22R00, BIOS R0IET38W (1.16 ) 05/31/2017
Call Trace:
dump_stack+0x7f/0xa1
check_noncircular+0x105/0x120
? __lock_acquire+0x147a/0x1a50
__lock_acquire+0x147a/0x1a50
lock_acquire+0x277/0x3d0
? hci_conn_get_phy+0x1c/0x150 [bluetooth]
? __lock_acquire+0x2e1/0x1a50
? lock_is_held_type+0xb4/0x120
? hci_conn_get_phy+0x1c/0x150 [bluetooth]
__mutex_lock+0xa3/0xa10
? hci_conn_get_phy+0x1c/0x150 [bluetooth]
? lock_acquire+0x277/0x3d0
? mark_held_locks+0x49/0x70
? mark_held_locks+0x49/0x70
? hci_conn_get_phy+0x1c/0x150 [bluetooth]
hci_conn_get_phy+0x1c/0x150 [bluetooth]
l2cap_sock_getsockopt+0x5a9/0x610 [bluetooth]
__sys_getsockopt+0xcc/0x200
__x64_sys_getsockopt+0x20/0x30
do_syscall_64+0x33/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fb73df33eee
Code: 48 8b 0d 85 0f 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 37 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 52 0f 0c 00 f7 d8 64 89 01 48
RSP: 002b:00007fffcfbbbf08 EFLAGS: 00000203 ORIG_RAX: 0000000000000037
RAX: ffffffffffffffda RBX: 0000000000000019 RCX: 00007fb73df33eee
RDX: 000000000000000e RSI: 0000000000000112 RDI: 0000000000000018
RBP: 0000000000000000 R08: 00007fffcfbbbf44 R09: 0000000000000000
R10: 00007fffcfbbbf3c R11: 0000000000000203 R12: 0000000000000000
R13: 0000000000000018 R14: 0000000000000000 R15: 0000556fcefc70d0
Fixes: eab2404ba798 ("Bluetooth: Add BT_PHY socket option")
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
