summaryrefslogtreecommitdiff
path: root/net/bluetooth/l2cap_core.c
AgeCommit message (Collapse)AuthorFilesLines
2013-01-30Merge branch 'for-upstream' of ↵John W. Linville1-5/+0
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
2013-01-10Bluetooth: Fix authentication if acl data comes before remote feature evtJaganath Kanakkassery1-0/+11
If remote device sends l2cap info request before read_remote_ext_feature completes then mgmt_connected will be sent in hci_acldata_packet() and remote name request wont be sent and eventually authentication wont happen Hcidump log of the issue < HCI Command: Create Connection (0x01|0x0005) plen 13 bdaddr BC:85:1F:74:7F:29 ptype 0xcc18 rswitch 0x01 clkoffset 0x4bf7 (valid) Packet type: DM1 DM3 DM5 DH1 DH3 DH5 > HCI Event: Command Status (0x0f) plen 4 Create Connection (0x01|0x0005) status 0x00 ncmd 1 > HCI Event: Connect Complete (0x03) plen 11 status 0x00 handle 12 bdaddr BC:85:1F:74:7F:29 type ACL encrypt 0x00 < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2 handle 12 > HCI Event: Command Status (0x0f) plen 4 Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 1 > HCI Event: Read Remote Supported Features (0x0b) plen 11 status 0x00 handle 12 Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87 > HCI Event: Max Slots Change (0x1b) plen 3 handle 12 slots 5 < HCI Command: Read Remote Extended Features (0x01|0x001c) plen 3 handle 12 page 1 > HCI Event: Command Status (0x0f) plen 4 Read Remote Extended Features (0x01|0x001c) status 0x00 ncmd 1 > ACL data: handle 12 flags 0x02 dlen 10 L2CAP(s): Info req: type 2 < ACL data: handle 12 flags 0x00 dlen 16 L2CAP(s): Info rsp: type 2 result 0 Extended feature mask 0x00b8 Enhanced Retransmission mode Streaming mode FCS Option Fixed Channels > HCI Event: Read Remote Extended Features (0x23) plen 13 status 0x00 handle 12 page 1 max 1 Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 > ACL data: handle 12 flags 0x02 dlen 10 L2CAP(s): Info req: type 3 < ACL data: handle 12 flags 0x00 dlen 20 L2CAP(s): Info rsp: type 3 result 0 Fixed channel list 0x00000002 L2CAP Signalling Channel > HCI Event: Number of Completed Packets (0x13) plen 5 handle 12 packets 2 This patch moves sending mgmt_connected from hci_acldata_packet() to l2cap_connect_req() since this code is to handle the scenario remote device sends l2cap connect req too fast Signed-off-by: Jaganath Kanakkassery <jaganath.k@samsung.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-01-09Bluetooth: AMP: Remove dead codeAndrei Emeltchenko1-5/+0
Remove code which cannot execute. l2cap_conn_add for AMP_LINK might only be invoked when receiving data in l2cap_recv_acldata. But this case is checked in the first statement there. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-12-03Bluetooth: trivial: Change NO_FCS_RECV to RECV_NO_FCSAndrei Emeltchenko1-5/+5
Make code more readable by changing CONF_NO_FCS_RECV which is read as "No L2CAP FCS option received" to CONF_RECV_NO_FCS which means "Received L2CAP option NO_FCS". This flag really means that we have received L2CAP FRAME CHECK SEQUENCE (FCS) OPTION with value "No FCS". Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-12-03Bluetooth: Process receiving FCS_NONE in L2CAP Conf RspAndrei Emeltchenko1-0/+7
Process L2CAP Config rsp Pending with FCS Option 0x00 (No FCS) which is sent by Motorola Windows 7 Bluetooth stack. The trace is shown below (all other options are skipped). ... < ACL data: handle 1 flags 0x00 dlen 48 L2CAP(s): Config req: dcid 0x0043 flags 0x00 clen 36 ... FCS Option 0x00 (No FCS) > ACL data: handle 1 flags 0x02 dlen 48 L2CAP(s): Config req: dcid 0x0041 flags 0x00 clen 36 ... FCS Option 0x01 (CRC16 Check) < ACL data: handle 1 flags 0x00 dlen 47 L2CAP(s): Config rsp: scid 0x0043 flags 0x00 result 4 clen 33 Pending ... > ACL data: handle 1 flags 0x02 dlen 50 L2CAP(s): Config rsp: scid 0x0041 flags 0x00 result 4 clen 36 Pending ... FCS Option 0x00 (No FCS) < ACL data: handle 1 flags 0x00 dlen 14 L2CAP(s): Config rsp: scid 0x0043 flags 0x00 result 0 clen 0 Success > ACL data: handle 1 flags 0x02 dlen 14 L2CAP(s): Config rsp: scid 0x0041 flags 0x00 result 0 clen 0 Success ... Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-12-03Bluetooth: Fix missing L2CAP EWS Conf parameterAndrei Emeltchenko1-17/+15
If L2CAP_FEAT_FCS is not supported we sould miss EWS option configuration because of break. Make code more readable by combining FCS configuration in the single block. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-12-03Bluetooth: AMP: Check that AMP is present and activeAndrei Emeltchenko1-0/+1
Before starting quering remote AMP controllers make sure that there is local active AMP controller. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-12-03Bluetooth: Refactor l2cap_send_disconn_reqAndrei Emeltchenko1-30/+26
l2cap_send_disconn_req takes 3 parameters of which conn might be derived from chan. Make this conversion inside l2cap_send_disconn_req. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-20Bluetooth: AMP: Set no FCS for incoming L2CAP chanAndrei Emeltchenko1-0/+1
When receiving L2CAP Create Channel Request set the channel as L2CAP_FCS_NONE. Then in "L2CAP Config req" following field will be set: "FCS Option 0x00 (No FCS)". So by default High Speed channels have no FCS. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-20Bluetooth: Improve error message printingAndrei Emeltchenko1-1/+1
Instead of printing: "[ 7763.082007] Bluetooth: 2" print something like: "[ 7763.082007] Bluetooth: Trailing bytes: 2 in sframe" Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-20Bluetooth: Fix sending L2CAP Create Chan ReqAndrei Emeltchenko1-11/+18
When receiving Physical Link Completed event we need to create L2CAP channel with L2CAP Create Chan Request. Current code was sending this command only if connection was pending (which is probably needed in channel move case). If channel is not moved but created Create Chan should be sent for outgoing channel which is checked with BT_CONNECT flag. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-20Bluetooth: trivial: Use __constant for constantsAndrei Emeltchenko1-4/+4
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-20Bluetooth: Disable FCS only for new HS channelsAndrei Emeltchenko1-0/+2
Set chan->fcs to L2CAP_FCS_NONE only for new L2CAP channels (not moved). Other side can still request to use FCS. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-20Bluetooth: Refactor locking in amp_physical_cfmAndrei Emeltchenko1-5/+2
Remove locking from l2cap_physical_cfm and lock chan inside amp_physical_cfm. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-20Bluetooth: Remove unneeded local_amp_id initializationAndrei Emeltchenko1-1/+0
local_amp_id is already set in l2cap_connect() which is called several lines above. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-20Bluetooth: Use __l2cap_no_conn_pending helperAndrei Emeltchenko1-1/+1
Use helper instead of test_bit. This is the only place left using test CONF_CONNECT_PEND flag. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-02Bluetooth: Rename ctrl_id to remote_amp_idAndrei Emeltchenko1-1/+1
Since we have started to use local_amp_id for local AMP Controller Id it makes sense to rename ctrl_id to remote_amp_id since it represents remote AMP controller Id. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-02Bluetooth: Process Create Chan RequestAndrei Emeltchenko1-20/+43
Add processing L2CAP Create Chan Request. When channel is created save associated high speed link hs_hcon. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-02Bluetooth: AMP: Check for hs_hcon instead of ctrl_idAndrei Emeltchenko1-2/+2
When deciding whether to send EFS configuration response with success, check rather for existence of High Speed physical link hs_hcon then ctrl_id. There might be cases when there is ctrl_id but high speed link is not established yet. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-02Bluetooth: Disconnect logical link when deleting chanAndrei Emeltchenko1-0/+7
Disconnect logical link for high speed channel hs_hchan associated with L2CAP channel chan. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-02Bluetooth: AMP: Add Logical Link Create functionAndrei Emeltchenko1-5/+14
After physical link is created logical link needs to be created. The process starts after L2CAP channel is created and L2CAP Configuration Response with result PENDING is received. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-02Bluetooth: Derive remote and local amp id from chan structAndrei Emeltchenko1-2/+4
l2cap_chan already keeps information about *_amp_id. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-02Bluetooth: Return correct L2CAP response typeAndrei Emeltchenko1-1/+10
Return L2CAP_CREATE_CHAN_RSP for Create Channel Request and L2CAP_CONN_RSP for Create Connection Request. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-02Bluetooth: Save hs_hchan instead of hs_hcon in loglink completeAndrei Emeltchenko1-1/+1
When logical link creation is completed we need to save hs_hchan which represents logical link instead of hs_hcon representing physical link. hs_hcon shall be saved when receiving physical link complete event. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-02Bluetooth: trivial: Fix braces style and remove empty lineAndrei Emeltchenko1-2/+2
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-02Bluetooth: AMP: Process Logical Link complete evtAndrei Emeltchenko1-2/+2
After receiving HCI Logical Link Complete event finish EFS configuration by sending L2CAP Conf Response with success code. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-02Bluetooth: Use helper function sending EFS conf rspAndrei Emeltchenko1-6/+1
There is helper function used to send EFS Configuration Response. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-02Bluetooth: trivial: Remove unneeded assignmentAndrei Emeltchenko1-1/+1
Assignment is not needed here since err is always gets value. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-24Bluetooth: Start channel move when socket option is changedMat Martineau1-0/+19
Channel moves are triggered by changes to the BT_CHANNEL_POLICY sockopt when an ERTM or streaming-mode channel is connected. Moves are only started if enable_hs is true. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-24Bluetooth: Do not retransmit data during a channel moveMat Martineau1-2/+2
Do not retransmit previously-sent data when a "receiver ready" s-frame with the "final" flag is received during a move. The ERTM state machines will resynchronize at the end of a channel move, and the state machine needs to avoid state changes during a move. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Acked-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-24Bluetooth: Ignore BR/EDR packet size constraints when fragmenting for AMPMat Martineau1-1/+3
When operating over BR/EDR, ERTM accounts for the maximum over-the-air packet size when setting the PDU size. AMP controllers do not use the same over-the-air packets, so the PDU size should only be based on the HCI MTU of the AMP controller. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-24Bluetooth: Configure appropriate timeouts for AMP controllersMat Martineau1-6/+41
The L2CAP spec recommends specific retransmit and monitor timeouts for ERTM channels that are on AMP controllers. These timeouts are calculated from the AMP controller's best effort flush timeout. BR/EDR controllers use the default retransmit and monitor timeouts. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-24Bluetooth: Do not send data during channel moveMat Martineau1-0/+12
Outgoing ERTM data is queued during a channel move. The ERTM state machine is partially reset at the start of a move, and must be resynchronized with the remote state machine at the end of the move. Data is not sent so that there are no state transitions between the partial reset and the resync. Streaming mode frames are dropped during a move. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Acked-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-24Bluetooth: Flag ACL frames as complete for AMP controllersMat Martineau1-0/+9
AMP controllers expect to transmit only "complete" ACL frames. These frames have both the "start" and "cont" bits set. AMP does not allow fragmented ACLs. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Acked-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-24Bluetooth: Handle physical link completionMat Martineau1-0/+164
Several different actions may be taken when an AMP physical link becomes available. A channel being created on an AMP controller must continue the connection process. A channel being moved needs to either send a move request or a move response. A failed physical link will revert to using a BR/EDR controller if possible. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Acked-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-24Bluetooth: Add move confirm response handlingMat Martineau1-0/+18
The move confirm response concludes the channel move command sequence. Receipt of this command indicates that data may begin to flow again. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Acked-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-24Bluetooth: Add logical link confirmMat Martineau1-11/+123
The logical link confirm callback is executed when the AMP controller completes its logical link setup. During a channel move, a newly formed logical link allows a move responder to send a move channel response. A move initiator will send a move channel confirm. A failed logical link will end the channel move and send an appropriate response or confirm command indicating a failure. If the channel is being created on an AMP controller, L2CAP configuration is completed after the logical link is set up. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-24Bluetooth: Move channel responseMat Martineau1-15/+168
The move response command includes a result code indicating "pending", "success", or "failure" status. A pending result is received when the remote address is still setting up a physical link, and will be followed by success or failure. On success, logical link setup will proceed. On failure, the move is stopped. The receiver of a move channel response must always follow up by sending a move channel confirm command. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-24Bluetooth: Add move channel confirm handlingMat Martineau1-3/+55
After sending a move channel response, a move responder waits for a move channel confirm command. If the received command has a "confirmed" result the move is proceeding, and "unconfirmed" means the move has failed and the channel will not change controllers. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Acked-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-24Bluetooth: Add new ERTM receive states for channel moveMat Martineau1-0/+102
Two new states are required to implement channel moves with the ERTM receive state machine. The "WAIT_P" state is used by a move responder to wait for a "poll" flag after a move is completed (success or failure). "WAIT_F" is similarly used by a move initiator to wait for a "final" flag when the move is completing. In either state, the reqseq value in the poll/final frame tells the state machine exactly which frame should be expected next. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Acked-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-24Bluetooth: Channel move request handlingMat Martineau1-1/+112
On receipt of a channel move request, the request must be validated based on the L2CAP mode, connection state, and controller capabilities. ERTM channels must have their state machines cleared and transmission paused while the channel move takes place. If the channel is being moved to an AMP controller then an AMP physical link must be prepared. Moving the channel back to BR/EDR proceeds immediately. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Acked-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-24Bluetooth: Lookup channel structure based on DCIDMat Martineau1-0/+17
Processing a move channel request involves getting the channel structure using the destination channel ID. Previous code could only look up using the source channel ID. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Acked-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-24Bluetooth: Remove unnecessary intermediate functionMat Martineau1-11/+2
Resolves a conflict resolution issue in "Bluetooth: Fix L2CAP coding style". The remaining connect and create channel response handler is renamed to better reflect its use for both response types. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Acked-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-24Bluetooth: Add L2CAP create channel request handlingMat Martineau1-15/+48
The L2CAP create channel request is very similar to an L2CAP connect request, but it has an additional parameter for the controller ID. If the controller id is 0, the channel is set up on the BR/EDR controller (just like a connect request). Using a valid high speed controller ID will cause the channel to be initially created on that high speed controller. While the L2CAP data will be initially routed over the AMP controller, the L2CAP fixed signaling channel only uses BR/EDR. When a create channel request is received for a high speed controller, a pending response is always sent first. After the high speed physical and logical links are complete a success response will be sent. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-24Bluetooth: Add new l2cap_chan struct members for high speed channelsMat Martineau1-0/+5
An L2CAP channel using high speed continues to be associated with a BR/EDR l2cap_conn, while also tracking an additional hci_conn (representing a physical link on a high speed controller) and hci_chan (representing a logical link). There may only be one physical link between two high speed controllers. Each physical link may contain several logical links, with each logical link representing a channel with specific quality of service. During a channel move, the destination channel id, current move state, and role (initiator vs. responder) are tracked and used by the channel move state machine. The ident value associated with a move request must also be stored in order to use it in later move responses. The active channel is stored in local_amp_id. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-19Merge branch 'master' of ↵John W. Linville1-217/+286
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
2012-10-15Bluetooth: Zero bredr pointer when chan is deletedAndrei Emeltchenko1-0/+4
If BREDR L2CAP chan is deleted and this chan is the channel through which High Speed traffic is routed to AMP then zero pointer to the chan in amp_mgr to prevent accessing it. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-15Bluetooth: Send EFS Conf Rsp only for BR/EDR chanAndrei Emeltchenko1-2/+10
Do not send EFS Configuration Response for High Speed channel yet. It will be sent after receiving Logical Link Complete event. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-15Bluetooth: AMP: Drop packets when no l2cap conn existAndrei Emeltchenko1-0/+4
High Speed hci_conn should always have l2cap_conn associated with it. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-15Bluetooth: AMP: Handle complete frames in l2capAndrei Emeltchenko1-5/+10
Check flags type in switch statement and handle new frame type ACL_COMPLETE used for High Speed data over AMP. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-10 13:08:59 +0300