| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm updates from Dave Hansen:
"New Feature:
- Randomize the per-cpu entry areas
Cleanups:
- Have CR3_ADDR_MASK use PHYSICAL_PAGE_MASK instead of open coding it
- Move to "native" set_memory_rox() helper
- Clean up pmd_get_atomic() and i386-PAE
- Remove some unused page table size macros"
* tag 'x86_mm_for_6.2_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (35 commits)
x86/mm: Ensure forced page table splitting
x86/kasan: Populate shadow for shared chunk of the CPU entry area
x86/kasan: Add helpers to align shadow addresses up and down
x86/kasan: Rename local CPU_ENTRY_AREA variables to shorten names
x86/mm: Populate KASAN shadow for entire per-CPU range of CPU entry area
x86/mm: Recompute physical address for every page of per-CPU CEA mapping
x86/mm: Rename __change_page_attr_set_clr(.checkalias)
x86/mm: Inhibit _PAGE_NX changes from cpa_process_alias()
x86/mm: Untangle __change_page_attr_set_clr(.checkalias)
x86/mm: Add a few comments
x86/mm: Fix CR3_ADDR_MASK
x86/mm: Remove P*D_PAGE_MASK and P*D_PAGE_SIZE macros
mm: Convert __HAVE_ARCH_P..P_GET to the new style
mm: Remove pointless barrier() after pmdp_get_lockless()
x86/mm/pae: Get rid of set_64bit()
x86_64: Remove pointless set_64bit() usage
x86/mm/pae: Be consistent with pXXp_get_and_clear()
x86/mm/pae: Use WRITE_ONCE()
x86/mm/pae: Don't (ab)use atomic64
mm/gup: Fix the lockless PMD access
...
|
|
Because endlessly repeating:
set_memory_ro()
set_memory_x()
is getting tedious.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/Y1jek64pXOsougmz@hirez.programming.kicks-ass.net
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says:
====================
pull-request: bpf-next 2022-12-11
We've added 74 non-merge commits during the last 11 day(s) which contain
a total of 88 files changed, 3362 insertions(+), 789 deletions(-).
The main changes are:
1) Decouple prune and jump points handling in the verifier, from Andrii.
2) Do not rely on ALLOW_ERROR_INJECTION for fmod_ret, from Benjamin.
Merged from hid tree.
3) Do not zero-extend kfunc return values. Necessary fix for 32-bit archs,
from Björn.
4) Don't use rcu_users to refcount in task kfuncs, from David.
5) Three reg_state->id fixes in the verifier, from Eduard.
6) Optimize bpf_mem_alloc by reusing elements from free_by_rcu, from Hou.
7) Refactor dynptr handling in the verifier, from Kumar.
8) Remove the "/sys" mount and umount dance in {open,close}_netns
in bpf selftests, from Martin.
9) Enable sleepable support for cgrp local storage, from Yonghong.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (74 commits)
selftests/bpf: test case for relaxed prunning of active_lock.id
selftests/bpf: Add pruning test case for bpf_spin_lock
bpf: use check_ids() for active_lock comparison
selftests/bpf: verify states_equal() maintains idmap across all frames
bpf: states_equal() must build idmap for all function frames
selftests/bpf: test cases for regsafe() bug skipping check_id()
bpf: regsafe() must not skip check_ids()
docs/bpf: Add documentation for BPF_MAP_TYPE_SK_STORAGE
selftests/bpf: Add test for dynptr reinit in user_ringbuf callback
bpf: Use memmove for bpf_dynptr_{read,write}
bpf: Move PTR_TO_STACK alignment check to process_dynptr_func
bpf: Rework check_func_arg_reg_off
bpf: Rework process_dynptr_func
bpf: Propagate errors from process_* checks in check_func_arg
bpf: Refactor ARG_PTR_TO_DYNPTR checks into process_dynptr_func
bpf: Skip rcu_barrier() if rcu_trace_implies_rcu_gp() is true
bpf: Reuse freed element in free_by_rcu during allocation
selftests/bpf: Bring test_offload.py back to life
bpf: Fix comment error in fixup_kfunc_call function
bpf: Do not zero-extend kfunc return values
...
====================
Link: https://lore.kernel.org/r/20221212024701.73809-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzkaller reported:
BUG: KASAN: slab-out-of-bounds in __build_skb_around+0x235/0x340 net/core/skbuff.c:294
Write of size 32 at addr ffff88802aa172c0 by task syz-executor413/5295
For bpf_prog_test_run_skb(), which uses a kmalloc()ed buffer passed to
build_skb().
When build_skb() is passed a frag_size of 0, it means the buffer came
from kmalloc. In these cases, ksize() is used to find its actual size,
but since the allocation may not have been made to that size, actually
perform the krealloc() call so that all the associated buffer size
checking will be correctly notified (and use the "new" pointer so that
compiler hinting works correctly). Split this logic out into a new
interface, slab_build_skb(), but leave the original 0 checking for now
to catch any stragglers.
Reported-by: syzbot+fda18eaa8c12534ccb3b@syzkaller.appspotmail.com
Link: https://groups.google.com/g/syzkaller-bugs/c/UnIKxTtU5-0/m/-wbXinkgAQAJ
Fixes: 38931d8989b5 ("mm: Make ksize() a reporting-only function")
Cc: Pavel Begunkov <asml.silence@gmail.com>
Cc: pepsipu <soopthegoop@gmail.com>
Cc: syzbot+fda18eaa8c12534ccb3b@syzkaller.appspotmail.com
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: kasan-dev <kasan-dev@googlegroups.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: ast@kernel.org
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Hao Luo <haoluo@google.com>
Cc: Jesper Dangaard Brouer <hawk@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: jolsa@kernel.org
Cc: KP Singh <kpsingh@kernel.org>
Cc: martin.lau@linux.dev
Cc: Stanislav Fomichev <sdf@google.com>
Cc: song@kernel.org
Cc: Yonghong Song <yhs@fb.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221208060256.give.994-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Merge commit 5b481acab4ce ("bpf: do not rely on ALLOW_ERROR_INJECTION for fmod_ret")
from hid tree into bpf-next.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The current way of expressing that a non-bpf kernel component is willing
to accept that bpf programs can be attached to it and that they can change
the return value is to abuse ALLOW_ERROR_INJECTION.
This is debated in the link below, and the result is that it is not a
reasonable thing to do.
Reuse the kfunc declaration structure to also tag the kernel functions
we want to be fmodret. This way we can control from any subsystem which
functions are being modified by bpf without touching the verifier.
Link: https://lore.kernel.org/all/20221121104403.1545f9b5@gandalf.local.home/
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/r/20221206145936.922196-2-benjamin.tissoires@redhat.com
|
|
====================
bpf-next 2022-11-25
We've added 101 non-merge commits during the last 11 day(s) which contain
a total of 109 files changed, 8827 insertions(+), 1129 deletions(-).
The main changes are:
1) Support for user defined BPF objects: the use case is to allocate own
objects, build own object hierarchies and use the building blocks to
build own data structures flexibly, for example, linked lists in BPF,
from Kumar Kartikeya Dwivedi.
2) Add bpf_rcu_read_{,un}lock() support for sleepable programs,
from Yonghong Song.
3) Add support storing struct task_struct objects as kptrs in maps,
from David Vernet.
4) Batch of BPF map documentation improvements, from Maryam Tahhan
and Donald Hunter.
5) Improve BPF verifier to propagate nullness information for branches
of register to register comparisons, from Eduard Zingerman.
6) Fix cgroup BPF iter infra to hold reference on the start cgroup,
from Hou Tao.
7) Fix BPF verifier to not mark fentry/fexit program arguments as trusted
given it is not the case for them, from Alexei Starovoitov.
8) Improve BPF verifier's realloc handling to better play along with dynamic
runtime analysis tools like KASAN and friends, from Kees Cook.
9) Remove legacy libbpf mode support from bpftool,
from Sahid Orentino Ferdjaoui.
10) Rework zero-len skb redirection checks to avoid potentially breaking
existing BPF test infra users, from Stanislav Fomichev.
11) Two small refactorings which are independent and have been split out
of the XDP queueing RFC series, from Toke Høiland-Jørgensen.
12) Fix a memory leak in LSM cgroup BPF selftest, from Wang Yufen.
13) Documentation on how to run BPF CI without patch submission,
from Daniel Müller.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
Link: https://lore.kernel.org/r/20221125012450.441-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To avoid potentially breaking existing users.
Both mac/no-mac cases have to be amended; mac_header >= network_header
is not enough (verified with a new test, see next patch).
Fixes: fd1894224407 ("bpf: Don't redirect packets with invalid pkt_len")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20221121180340.1983627-1-sdf@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Instead of having to pass multiple arguments that describe the register,
pass the bpf_reg_state into the btf_struct_access callback. Currently,
all call sites simply reuse the btf and btf_id of the reg they want to
check the access of. The only exception to this pattern is the callsite
in check_ptr_to_map_access, hence for that case create a dummy reg to
simulate PTR_TO_BTF_ID access.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221114191547.1694267-8-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
We got a syzkaller problem because of aarch64 alignment fault
if KFENCE enabled. When the size from user bpf program is an odd
number, like 399, 407, etc, it will cause the struct skb_shared_info's
unaligned access. As seen below:
BUG: KFENCE: use-after-free read in __skb_clone+0x23c/0x2a0 net/core/skbuff.c:1032
Use-after-free read at 0xffff6254fffac077 (in kfence-#213):
__lse_atomic_add arch/arm64/include/asm/atomic_lse.h:26 [inline]
arch_atomic_add arch/arm64/include/asm/atomic.h:28 [inline]
arch_atomic_inc include/linux/atomic-arch-fallback.h:270 [inline]
atomic_inc include/asm-generic/atomic-instrumented.h:241 [inline]
__skb_clone+0x23c/0x2a0 net/core/skbuff.c:1032
skb_clone+0xf4/0x214 net/core/skbuff.c:1481
____bpf_clone_redirect net/core/filter.c:2433 [inline]
bpf_clone_redirect+0x78/0x1c0 net/core/filter.c:2420
bpf_prog_d3839dd9068ceb51+0x80/0x330
bpf_dispatcher_nop_func include/linux/bpf.h:728 [inline]
bpf_test_run+0x3c0/0x6c0 net/bpf/test_run.c:53
bpf_prog_test_run_skb+0x638/0xa7c net/bpf/test_run.c:594
bpf_prog_test_run kernel/bpf/syscall.c:3148 [inline]
__do_sys_bpf kernel/bpf/syscall.c:4441 [inline]
__se_sys_bpf+0xad0/0x1634 kernel/bpf/syscall.c:4381
kfence-#213: 0xffff6254fffac000-0xffff6254fffac196, size=407, cache=kmalloc-512
allocated by task 15074 on cpu 0 at 1342.585390s:
kmalloc include/linux/slab.h:568 [inline]
kzalloc include/linux/slab.h:675 [inline]
bpf_test_init.isra.0+0xac/0x290 net/bpf/test_run.c:191
bpf_prog_test_run_skb+0x11c/0xa7c net/bpf/test_run.c:512
bpf_prog_test_run kernel/bpf/syscall.c:3148 [inline]
__do_sys_bpf kernel/bpf/syscall.c:4441 [inline]
__se_sys_bpf+0xad0/0x1634 kernel/bpf/syscall.c:4381
__arm64_sys_bpf+0x50/0x60 kernel/bpf/syscall.c:4381
To fix the problem, we adjust @size so that (@size + @hearoom) is a
multiple of SMP_CACHE_BYTES. So we make sure the struct skb_shared_info
is aligned to a cache line.
Fixes: 1cf1cae963c2 ("bpf: introduce BPF_PROG_TEST_RUN command")
Signed-off-by: Baisong Zhong <zhongbaisong@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/bpf/20221102081620.1465154-1-zhongbaisong@huawei.com
|
|
We add 2 new kfuncs that are following the RET_PTR_TO_MEM
capability from the previous commit.
Then we test them in selftests:
the first tests are testing valid case, and are not failing,
and the later ones are actually preventing the program to be loaded
because they are wrong.
To work around that, we mark the failing ones as not autoloaded
(with SEC("?tc")), and we manually enable them one by one, ensuring
the verifier rejects them.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20220906151303.2780789-8-benjamin.tissoires@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
We need to also export the kfunc set to the syscall program type,
and then add a couple of eBPF programs that are testing those calls.
The first one checks for valid access, and the second one is OK
from a static analysis point of view but fails at run time because
we are trying to access outside of the allocated memory.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20220906151303.2780789-5-benjamin.tissoires@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Andrii Nakryiko says:
====================
bpf-next 2022-08-17
We've added 45 non-merge commits during the last 14 day(s) which contain
a total of 61 files changed, 986 insertions(+), 372 deletions(-).
The main changes are:
1) New bpf_ktime_get_tai_ns() BPF helper to access CLOCK_TAI, from Kurt
Kanzenbach and Jesper Dangaard Brouer.
2) Few clean ups and improvements for libbpf 1.0, from Andrii Nakryiko.
3) Expose crash_kexec() as kfunc for BPF programs, from Artem Savkov.
4) Add ability to define sleepable-only kfuncs, from Benjamin Tissoires.
5) Teach libbpf's bpf_prog_load() and bpf_map_create() to gracefully handle
unsupported names on old kernels, from Hangbin Liu.
6) Allow opting out from auto-attaching BPF programs by libbpf's BPF skeleton,
from Hao Luo.
7) Relax libbpf's requirement for shared libs to be marked executable, from
Henqgi Chen.
8) Improve bpf_iter internals handling of error returns, from Hao Luo.
9) Few accommodations in libbpf to support GCC-BPF quirks, from James Hilliard.
10) Fix BPF verifier logic around tracking dynptr ref_obj_id, from Joanne Koong.
11) bpftool improvements to handle full BPF program names better, from Manu
Bretelle.
12) bpftool fixes around libcap use, from Quentin Monnet.
13) BPF map internals clean ups and improvements around memory allocations,
from Yafang Shao.
14) Allow to use cgroup_get_from_file() on cgroupv1, allowing BPF cgroup
iterator to work on cgroupv1, from Yosry Ahmed.
15) BPF verifier internal clean ups, from Dave Marchevsky and Joanne Koong.
16) Various fixes and clean ups for selftests/bpf and vmtest.sh, from Daniel
Xu, Artem Savkov, Joanne Koong, Andrii Nakryiko, Shibin Koikkara Reeny.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (45 commits)
selftests/bpf: Few fixes for selftests/bpf built in release mode
libbpf: Clean up deprecated and legacy aliases
libbpf: Streamline bpf_attr and perf_event_attr initialization
libbpf: Fix potential NULL dereference when parsing ELF
selftests/bpf: Tests libbpf autoattach APIs
libbpf: Allows disabling auto attach
selftests/bpf: Fix attach point for non-x86 arches in test_progs/lsm
libbpf: Making bpf_prog_load() ignore name if kernel doesn't support
selftests/bpf: Update CI kconfig
selftests/bpf: Add connmark read test
selftests/bpf: Add existing connection bpf_*_ct_lookup() test
bpftool: Clear errno after libcap's checks
bpf: Clear up confusion in bpf_skb_adjust_room()'s documentation
bpftool: Fix a typo in a comment
libbpf: Add names for auxiliary maps
bpf: Use bpf_map_area_alloc consistently on bpf map creation
bpf: Make __GFP_NOWARN consistent in bpf map creation
bpf: Use bpf_map_area_free instread of kvfree
bpf: Remove unneeded memset in queue_stack_map creation
libbpf: preserve errno across pr_warn/pr_info/pr_debug
...
====================
Link: https://lore.kernel.org/r/20220817215656.1180215-1-andrii@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a test checking that programs calling destructive kfuncs can only do
so if they have CAP_SYS_BOOT capabilities.
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Link: https://lore.kernel.org/r/20220810065905.475418-4-asavkov@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
In addition to TC hook, enable these in tracing programs so that they
can be used in selftests.
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220809213033.24147-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Teach the verifier to detect a new KF_TRUSTED_ARGS kfunc flag, which
means each pointer argument must be trusted, which we define as a
pointer that is referenced (has non-zero ref_obj_id) and also needs to
have its offset unchanged, similar to how release functions expect their
argument. This allows a kfunc to receive pointer arguments unchanged
from the result of the acquire kfunc.
This is required to ensure that kfunc that operate on some object only
work on acquired pointers and not normal PTR_TO_BTF_ID with same type
which can be obtained by pointer walking. The restrictions applied to
release arguments also apply to trusted arguments. This implies that
strict type matching (not deducing type by recursively following members
at offset) and OBJ_RELEASE offset checks (ensuring they are zero) are
used for trusted pointer arguments.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220721134245.2450-5-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Instead of populating multiple sets to indicate some attribute and then
researching the same BTF ID in them, prepare a single unified BTF set
which indicates whether a kfunc is allowed to be called, and also its
attributes if any at the same time. Now, only one call is needed to
perform the lookup for both kfunc availability and its attributes.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220721134245.2450-4-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Syzbot found an issue [1]: fq_codel_drop() try to drop a flow whitout any
skbs, that is, the flow->head is null.
The root cause, as the [2] says, is because that bpf_prog_test_run_skb()
run a bpf prog which redirects empty skbs.
So we should determine whether the length of the packet modified by bpf
prog or others like bpf_prog_test is valid before forwarding it directly.
LINK: [1] https://syzkaller.appspot.com/bug?id=0b84da80c2917757915afa89f7738a9d16ec96c5
LINK: [2] https://www.spinics.net/lists/netdev/msg777503.html
Reported-by: syzbot+7a12909485b94426aceb@syzkaller.appspotmail.com
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20220715115559.139691-1-shaozhengchao@huawei.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
These checks were effectively noops b/c there's only one way these
functions get called: through prog_ops dispatching. And since there's no
other callers, we can be sure that `prog` is always the correct type.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/0a9aaac329f76ddb17df1786b001117823ffefa5.1653855302.git.dxu@dxuuu.xyz
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-05-23
We've added 113 non-merge commits during the last 26 day(s) which contain
a total of 121 files changed, 7425 insertions(+), 1586 deletions(-).
The main changes are:
1) Speed up symbol resolution for kprobes multi-link attachments, from Jiri Olsa.
2) Add BPF dynamic pointer infrastructure e.g. to allow for dynamically sized ringbuf
reservations without extra memory copies, from Joanne Koong.
3) Big batch of libbpf improvements towards libbpf 1.0 release, from Andrii Nakryiko.
4) Add BPF link iterator to traverse links via seq_file ops, from Dmitrii Dolgov.
5) Add source IP address to BPF tunnel key infrastructure, from Kaixi Fan.
6) Refine unprivileged BPF to disable only object-creating commands, from Alan Maguire.
7) Fix JIT blinding of ld_imm64 when they point to subprogs, from Alexei Starovoitov.
8) Add BPF access to mptcp_sock structures and their meta data, from Geliang Tang.
9) Add new BPF helper for access to remote CPU's BPF map elements, from Feng Zhou.
10) Allow attaching 64-bit cookie to BPF link of fentry/fexit/fmod_ret, from Kui-Feng Lee.
11) Follow-ups to typed pointer support in BPF maps, from Kumar Kartikeya Dwivedi.
12) Add busy-poll test cases to the XSK selftest suite, from Magnus Karlsson.
13) Improvements in BPF selftest test_progs subtest output, from Mykola Lysenko.
14) Fill bpf_prog_pack allocator areas with illegal instructions, from Song Liu.
15) Add generic batch operations for BPF map-in-map cases, from Takshak Chahande.
16) Make bpf_jit_enable more user friendly when permanently on 1, from Tiezhu Yang.
17) Fix an array overflow in bpf_trampoline_get_progs(), from Yuntao Wang.
====================
Link: https://lore.kernel.org/r/20220523223805.27931-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The code for gso_max_size was added originally to allow for debugging and
workaround of buggy devices that couldn't support TSO with blocks 64K in
size. The original reason for limiting it to 64K was because that was the
existing limits of IPv4 and non-jumbogram IPv6 length fields.
With the addition of Big TCP we can remove this limit and allow the value
to potentially go up to UINT_MAX and instead be limited by the tso_max_size
value.
So in order to support this we need to go through and clean up the
remaining users of the gso_max_size value so that the values will cap at
64K for non-TCPv6 flows. In addition we can clean up the GSO_MAX_SIZE value
so that 64K becomes GSO_LEGACY_MAX_SIZE and UINT_MAX will now be the upper
limit for GSO_MAX_SIZE.
v6: (edumazet) fixed a compile error if CONFIG_IPV6=n,
in a new sk_trim_gso_size() helper.
netif_set_tso_max_size() caps the requested TSO size
with GSO_MAX_SIZE.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In an effort to actually test the refcounting logic at runtime, add a
refcount_t member to prog_test_ref_kfunc and use it in selftests to
verify and test the whole logic more exhaustively.
The kfunc calls for prog_test_member do not require runtime refcounting,
as they are only used for verifier selftests, not during runtime
execution. Hence, their implementation now has a WARN_ON_ONCE as it is
not meant to be reachable code at runtime. It is strictly used in tests
triggering failure cases in the verifier. bpf_kfunc_call_memb_release is
called from map free path, since prog_test_member is embedded in map
value for some verifier tests, so we skip WARN_ON_ONCE for it.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220511194654.765705-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Replace struct bpf_tramp_progs with struct bpf_tramp_links to collect
struct bpf_tramp_link(s) for a trampoline. struct bpf_tramp_link
extends bpf_link to act as a linked list node.
arch_prepare_bpf_trampoline() accepts a struct bpf_tramp_links to
collects all bpf_tramp_link(s) that a trampoline should call.
Change BPF trampoline and bpf_struct_ops to pass bpf_tramp_links
instead of bpf_tramp_progs.
Signed-off-by: Kui-Feng Lee <kuifeng@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220510205923.3206889-2-kuifeng@fb.com
|
|
include/linux/netdevice.h
net/core/dev.c
6510ea973d8d ("net: Use this_cpu_inc() to increment net->core_stats")
794c24e9921f ("net-core: rx_otherhost_dropped to core_stats")
https://lore.kernel.org/all/20220428111903.5f4304e0@canb.auug.org.au/
drivers/net/wan/cosa.c
d48fea8401cf ("net: cosa: fix error check return value of register_chrdev()")
89fbca3307d4 ("net: wan: remove support for COSA and SRP synchronous serial boards")
https://lore.kernel.org/all/20220428112130.1f689e5e@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Ensure that the edge case where first member type was matched
successfully even if it didn't match BTF type of register is caught and
rejected by the verifier.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220424214901.2743946-14-memxor@gmail.com
|
|
Reuse bpf_prog_test functions to test the support for PTR_TO_BTF_ID in
BPF map case, including some tests that verify implementation sanity and
corner cases.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220424214901.2743946-13-memxor@gmail.com
|
|
The live packet mode in BPF_PROG_RUN allocates a page_pool instance for
each test run instance and uses it for the packet data. On setup it creates
the page_pool, and calls xdp_reg_mem_model() to allow pages to be returned
properly from the XDP data path. However, xdp_reg_mem_model() also raises
the reference count of the page_pool itself, so the single
page_pool_destroy() count on teardown was not enough to actually release
the pool. To fix this, add an additional xdp_unreg_mem_model() call on
teardown.
Fixes: b530e9e1063e ("bpf: Add "live packet" mode for XDP in BPF_PROG_RUN")
Reported-by: Freysteinn Alfredsson <freysteinn.alfredsson@kau.se>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20220409213053.3117305-1-toke@redhat.com
|
|
The live packet mode uses some extra space at the start of each page to
cache data structures so they don't have to be rebuilt at every repetition.
This space wasn't correctly accounted for in the size checking of the
arguments supplied to userspace. In addition, the definition of the frame
size should include the size of the skb_shared_info (as there is other
logic that subtracts the size of this).
Together, these mistakes resulted in userspace being able to trip the
XDP_WARN() in xdp_update_frame_from_buff(), which syzbot discovered in
short order. Fix this by changing the frame size define and adding the
extra headroom to the bpf_prog_test_run_xdp() function. Also drop the
max_len parameter to the page_pool init, since this is related to DMA which
is not used for the page pool instance in PROG_TEST_RUN.
Fixes: b530e9e1063e ("bpf: Add "live packet" mode for XDP in BPF_PROG_RUN")
Reported-by: syzbot+0e91362d99386dc5de99@syzkaller.appspotmail.com
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220310225621.53374-1-toke@redhat.com
|
|
It is allocated with kvmalloc(), the corresponding release function
should not be kfree(), use kvfree() instead.
Generated by: scripts/coccinelle/api/kfree_mismatch.cocci
Fixes: b530e9e1063e ("bpf: Add "live packet" mode for XDP in BPF_PROG_RUN")
Signed-off-by: Yihao Han <hanyihao@vivo.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20220310092828.13405-1-hanyihao@vivo.com
|
|
The kernel test robot pointed out that the newly added
bpf_test_run_xdp_live() runner doesn't set the retval in the caller (by
design), which means that the variable can be passed unitialised to
bpf_test_finish(). Fix this by initialising the variable properly.
Fixes: b530e9e1063e ("bpf: Add "live packet" mode for XDP in BPF_PROG_RUN")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220310110228.161869-1-toke@redhat.com
|
|
This adds support for running XDP programs through BPF_PROG_RUN in a mode
that enables live packet processing of the resulting frames. Previous uses
of BPF_PROG_RUN for XDP returned the XDP program return code and the
modified packet data to userspace, which is useful for unit testing of XDP
programs.
The existing BPF_PROG_RUN for XDP allows userspace to set the ingress
ifindex and RXQ number as part of the context object being passed to the
kernel. This patch reuses that code, but adds a new mode with different
semantics, which can be selected with the new BPF_F_TEST_XDP_LIVE_FRAMES
flag.
When running BPF_PROG_RUN in this mode, the XDP program return codes will
be honoured: returning XDP_PASS will result in the frame being injected
into the networking stack as if it came from the selected networking
interface, while returning XDP_TX and XDP_REDIRECT will result in the frame
being transmitted out that interface. XDP_TX is translated into an
XDP_REDIRECT operation to the same interface, since the real XDP_TX action
is only possible from within the network drivers themselves, not from the
process context where BPF_PROG_RUN is executed.
Internally, this new mode of operation creates a page pool instance while
setting up the test run, and feeds pages from that into the XDP program.
The setup cost of this is amortised over the number of repetitions
specified by userspace.
To support the performance testing use case, we further optimise the setup
step so that all pages in the pool are pre-initialised with the packet
data, and pre-computed context and xdp_frame objects stored at the start of
each page. This makes it possible to entirely avoid touching the page
content on each XDP program invocation, and enables sending up to 9
Mpps/core on my test box.
Because the data pages are recycled by the page pool, and the test runner
doesn't re-initialise them for each run, subsequent invocations of the XDP
program will see the packet data in the state it was after the last time it
ran on that particular page. This means that an XDP program that modifies
the packet before redirecting it has to be careful about which assumptions
it makes about the packet content, but that is only an issue for the most
naively written programs.
Enabling the new flag is only allowed when not setting ctx_out and data_out
in the test specification, since using it means frames will be redirected
somewhere else, so they can't be returned.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220309105346.100053-2-toke@redhat.com
|
|
Include a few verifier selftests that test against the problems being
fixed by previous commits, i.e. release kfunc always require
PTR_TO_BTF_ID fixed and var_off to be 0, and negative offset is not
permitted and returns a helpful error message.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220304224645.3677453-9-memxor@gmail.com
|
|
Currently, -Wmissing-prototypes warning is ignored for GCC, but not
clang. This leads to clang build warning in W=1 mode. Since the flag
used by both compilers is same, we can use the unified __diag_ignore_all
macro that works for all supported versions and compilers which have
__diag macro support (currently GCC >= 8.0, and Clang >= 11.0).
Also add nf_conntrack_bpf.h include to prevent missing prototype warning
for register_nf_conntrack_bpf.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220304224645.3677453-8-memxor@gmail.com
|
|
Syzkaller reports another issue:
WARNING: CPU: 0 PID: 10775 at include/linux/thread_info.h:230
check_copy_size include/linux/thread_info.h:230 [inline]
WARNING: CPU: 0 PID: 10775 at include/linux/thread_info.h:230
copy_to_user include/linux/uaccess.h:199 [inline]
WARNING: CPU: 0 PID: 10775 at include/linux/thread_info.h:230
bpf_test_finish.isra.0+0x4b2/0x680 net/bpf/test_run.c:171
This can happen when the userspace buffer is smaller than head + frags.
Return ENOSPC in this case.
Fixes: 7855e0db150a ("bpf: test_run: add xdp_shared_info pointer in bpf_test_finish signature")
Reported-by: syzbot+5f81df6205ecbbc56ab5@syzkaller.appspotmail.com
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/bpf/20220228232332.458871-1-sdf@google.com
|
|
remote_port is another case of a BPF context field documented as a 32-bit
value in network byte order for which the BPF context access converter
generates a load of a zero-padded 16-bit integer in network byte order.
First such case was dst_port in bpf_sock which got addressed in commit
4421a582718a ("bpf: Make dst_port field in struct bpf_sock 16-bit wide").
Loading 4-bytes from the remote_port offset and converting the value with
bpf_ntohl() leads to surprising results, as the expected value is shifted
by 16 bits.
Reduce the confusion by splitting the field in two - a 16-bit field holding
a big-endian integer, and a 16-bit zero-padding anonymous field that
follows it.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220209184333.654927-2-jakub@cloudflare.com
|
|
This place also uses signed min_t and passes this singed int to
copy_to_user (which accepts unsigned argument). I don't think
there is an issue, but let's be consistent.
Fixes: 7855e0db150ad ("bpf: test_run: add xdp_shared_info pointer in bpf_test_finish signature")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220204235849.14658-2-sdf@google.com
|
|
When kattr->test.data_size_in > INT_MAX, signed min_t will assign
negative value to data_len. This negative value then gets passed
over to copy_from_user where it is converted to (big) unsigned.
Use unsigned min_t to avoid this overflow.
usercopy: Kernel memory overwrite attempt detected to wrapped address
(offset 0, size 18446612140539162846)!
------------[ cut here ]------------
kernel BUG at mm/usercopy.c:102!
invalid opcode: 0000 [#1] SMP KASAN
Modules linked in:
CPU: 0 PID: 3781 Comm: syz-executor226 Not tainted 4.15.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
RIP: 0010:usercopy_abort+0xbd/0xbf mm/usercopy.c:102
RSP: 0018:ffff8801e9703a38 EFLAGS: 00010286
RAX: 000000000000006c RBX: ffffffff84fc7040 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff816560a2 RDI: ffffed003d2e0739
RBP: ffff8801e9703a90 R08: 000000000000006c R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff84fc73a0
R13: ffffffff84fc7180 R14: ffffffff84fc7040 R15: ffffffff84fc7040
FS: 00007f54e0bec300(0000) GS:ffff8801f6600000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000280 CR3: 00000001e90ea000 CR4: 00000000003426f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
check_bogus_address mm/usercopy.c:155 [inline]
__check_object_size mm/usercopy.c:263 [inline]
__check_object_size.cold+0x8c/0xad mm/usercopy.c:253
check_object_size include/linux/thread_info.h:112 [inline]
check_copy_size include/linux/thread_info.h:143 [inline]
copy_from_user include/linux/uaccess.h:142 [inline]
bpf_prog_test_run_xdp+0xe57/0x1240 net/bpf/test_run.c:989
bpf_prog_test_run kernel/bpf/syscall.c:3377 [inline]
__sys_bpf+0xdf2/0x4a50 kernel/bpf/syscall.c:4679
SYSC_bpf kernel/bpf/syscall.c:4765 [inline]
SyS_bpf+0x26/0x50 kernel/bpf/syscall.c:4763
do_syscall_64+0x21a/0x3e0 arch/x86/entry/common.c:305
entry_SYSCALL_64_after_hwframe+0x46/0xbb
Fixes: 1c1949982524 ("bpf: introduce frags support to bpf_prog_test_run_xdp()")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220204235849.14658-1-sdf@google.com
|
|
Fix the following kasan issue reported by syzbot:
BUG: KASAN: slab-out-of-bounds in __skb_frag_set_page include/linux/skbuff.h:3242 [inline]
BUG: KASAN: slab-out-of-bounds in bpf_prog_test_run_xdp+0x10ac/0x1150 net/bpf/test_run.c:972
Write of size 8 at addr ffff888048c75000 by task syz-executor.5/23405
CPU: 1 PID: 23405 Comm: syz-executor.5 Not tainted 5.16.0-syzkaller #0
Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_address_description.constprop.0.cold+0x8d/0x336 mm/kasan/report.c:255
__kasan_report mm/kasan/report.c:442 [inline]
kasan_report.cold+0x83/0xdf mm/kasan/report.c:459
__skb_frag_set_page include/linux/skbuff.h:3242 [inline]
bpf_prog_test_run_xdp+0x10ac/0x1150 net/bpf/test_run.c:972
bpf_prog_test_run kernel/bpf/syscall.c:3356 [inline]
__sys_bpf+0x1858/0x59a0 kernel/bpf/syscall.c:4658
__do_sys_bpf kernel/bpf/syscall.c:4744 [inline]
__se_sys_bpf kernel/bpf/syscall.c:4742 [inline]
__x64_sys_bpf+0x75/0xb0 kernel/bpf/syscall.c:4742
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f4ea30dd059
RSP: 002b:00007f4ea1a52168 EFLAGS: 00000246 ORIG_RAX: 0000000000000141
RAX: ffffffffffffffda RBX: 00007f4ea31eff60 RCX: 00007f4ea30dd059
RDX: 0000000000000048 RSI: 0000000020000000 RDI: 000000000000000a
RBP: 00007f4ea313708d R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007ffc8367c5af R14: 00007f4ea1a52300 R15: 0000000000022000
</TASK>
Allocated by task 23405:
kasan_save_stack+0x1e/0x50 mm/kasan/common.c:38
kasan_set_track mm/kasan/common.c:46 [inline]
set_alloc_info mm/kasan/common.c:437 [inline]
____kasan_kmalloc mm/kasan/common.c:516 [inline]
____kasan_kmalloc mm/kasan/common.c:475 [inline]
__kasan_kmalloc+0xa9/0xd0 mm/kasan/common.c:525
kmalloc include/linux/slab.h:586 [inline]
kzalloc include/linux/slab.h:715 [inline]
bpf_test_init.isra.0+0x9f/0x150 net/bpf/test_run.c:411
bpf_prog_test_run_xdp+0x2f8/0x1150 net/bpf/test_run.c:941
bpf_prog_test_run kernel/bpf/syscall.c:3356 [inline]
__sys_bpf+0x1858/0x59a0 kernel/bpf/syscall.c:4658
__do_sys_bpf kernel/bpf/syscall.c:4744 [inline]
__se_sys_bpf kernel/bpf/syscall.c:4742 [inline]
__x64_sys_bpf+0x75/0xb0 kernel/bpf/syscall.c:4742
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
The buggy address belongs to the object at ffff888048c74000
which belongs to the cache kmalloc-4k of size 4096
The buggy address is located 0 bytes to the right of
4096-byte region [ffff888048c74000, ffff888048c75000)
The buggy address belongs to the page:
page:ffffea0001231c00 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x48c70
head:ffffea0001231c00 order:3 compound_mapcount:0 compound_pincount:0
flags: 0xfff00000010200(slab|head|node=0|zone=1|lastcpupid=0x7ff)
raw: 00fff00000010200 dead000000000100 dead000000000122 ffff888010c42140
raw: 0000000000000000 0000000080040004 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
prep_new_page mm/page_alloc.c:2434 [inline]
get_page_from_freelist+0xa72/0x2f50 mm/page_alloc.c:4165
__alloc_pages+0x1b2/0x500 mm/page_alloc.c:5389
alloc_pages+0x1aa/0x310 mm/mempolicy.c:2271
alloc_slab_page mm/slub.c:1799 [inline]
allocate_slab mm/slub.c:1944 [inline]
new_slab+0x28a/0x3b0 mm/slub.c:2004
___slab_alloc+0x87c/0xe90 mm/slub.c:3018
__slab_alloc.constprop.0+0x4d/0xa0 mm/slub.c:3105
slab_alloc_node mm/slub.c:3196 [inline]
__kmalloc_node_track_caller+0x2cb/0x360 mm/slub.c:4957
kmalloc_reserve net/core/skbuff.c:354 [inline]
__alloc_skb+0xde/0x340 net/core/skbuff.c:426
alloc_skb include/linux/skbuff.h:1159 [inline]
nsim_dev_trap_skb_build drivers/net/netdevsim/dev.c:745 [inline]
nsim_dev_trap_report drivers/net/netdevsim/dev.c:802 [inline]
nsim_dev_trap_report_work+0x29a/0xbc0 drivers/net/netdevsim/dev.c:843
process_one_work+0x9ac/0x1650 kernel/workqueue.c:2307
worker_thread+0x657/0x1110 kernel/workqueue.c:2454
kthread+0x2e9/0x3a0 kernel/kthread.c:377
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
page last free stack trace:
reset_page_owner include/linux/page_owner.h:24 [inline]
free_pages_prepare mm/page_alloc.c:1352 [inline]
free_pcp_prepare+0x374/0x870 mm/page_alloc.c:1404
free_unref_page_prepare mm/page_alloc.c:3325 [inline]
free_unref_page+0x19/0x690 mm/page_alloc.c:3404
qlink_free mm/kasan/quarantine.c:157 [inline]
qlist_free_all+0x6d/0x160 mm/kasan/quarantine.c:176
kasan_quarantine_reduce+0x180/0x200 mm/kasan/quarantine.c:283
__kasan_slab_alloc+0xa2/0xc0 mm/kasan/common.c:447
kasan_slab_alloc include/linux/kasan.h:260 [inline]
slab_post_alloc_hook mm/slab.h:732 [inline]
slab_alloc_node mm/slub.c:3230 [inline]
slab_alloc mm/slub.c:3238 [inline]
kmem_cache_alloc+0x202/0x3a0 mm/slub.c:3243
getname_flags.part.0+0x50/0x4f0 fs/namei.c:138
getname_flags include/linux/audit.h:323 [inline]
getname+0x8e/0xd0 fs/namei.c:217
do_sys_openat2+0xf5/0x4d0 fs/open.c:1208
do_sys_open fs/open.c:1230 [inline]
__do_sys_openat fs/open.c:1246 [inline]
__se_sys_openat fs/open.c:1241 [inline]
__x64_sys_openat+0x13f/0x1f0 fs/open.c:1241
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Memory state around the buggy address:
ffff888048c74f00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff888048c74f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
^
ffff888048c75080: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff888048c75100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================
Fixes: 1c19499825246 ("bpf: introduce frags support to bpf_prog_test_run_xdp()")
Reported-by: syzbot+6d70ca7438345077c549@syzkaller.appspotmail.com
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/688c26f9dd6e885e58e8e834ede3f0139bb7fa95.1643835097.git.lorenzo@kernel.org
|
|
BPF verifier supports direct memory access for BPF_PROG_TYPE_TRACING type
of bpf programs, e.g., a->b. If "a" is a pointer
pointing to kernel memory, bpf verifier will allow user to write
code in C like a->b and the verifier will translate it to a kernel
load properly. If "a" is a pointer to user memory, it is expected
that bpf developer should be bpf_probe_read_user() helper to
get the value a->b. Without utilizing BTF __user tagging information,
current verifier will assume that a->b is a kernel memory access
and this may generate incorrect result.
Now BTF contains __user information, it can check whether the
pointer points to a user memory or not. If it is, the verifier
can reject the program and force users to use bpf_probe_read_user()
helper explicitly.
In the future, we can easily extend btf_add_space for other
address space tagging, for example, rcu/percpu etc.
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20220127154606.654961-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Zero-length and one-element arrays are deprecated, see:
Documentation/process/deprecated.rst
Flexible-array members should be used instead.
Generated by: scripts/coccinelle/misc/flexible_array.cocci
Fixes: c1ff181ffabc ("selftests/bpf: Extend kfunc selftests")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/alpine.DEB.2.22.394.2201221206320.12220@hadrien
|
|
introduce xdp_shared_info pointer in bpf_test_finish signature in order
to copy back paged data from a xdp frags frame to userspace buffer
Acked-by: Toke Hoiland-Jorgensen <toke@redhat.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/c803673798c786f915bcdd6c9338edaa9740d3d6.1642758637.git.lorenzo@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Introduce the capability to allocate a xdp frags in
bpf_prog_test_run_xdp routine. This is a preliminary patch to
introduce the selftests for new xdp frags ebpf helpers
Acked-by: Toke Hoiland-Jorgensen <toke@redhat.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/b7c0e425a9287f00f601c4fc0de54738ec6ceeea.1642758637.git.lorenzo@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Rely on data_size_in in bpf_test_init routine signature. This is a
preliminary patch to introduce xdp frags selftest
Acked-by: Toke Hoiland-Jorgensen <toke@redhat.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/6b48d38ed3d60240d7d6bb15e6fa7fabfac8dfb2.1642758637.git.lorenzo@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This adds a complete test case to ensure we never take references to
modules not in MODULE_STATE_LIVE, which can lead to UAF, and it also
ensures we never access btf->kfunc_set_tab in an inconsistent state.
The test uses userfaultfd to artificially widen the race.
When run on an unpatched kernel, it leads to the following splat:
[root@(none) bpf]# ./test_progs -t bpf_mod_race/ksym
[ 55.498171] BUG: unable to handle page fault for address: fffffbfff802548b
[ 55.499206] #PF: supervisor read access in kernel mode
[ 55.499855] #PF: error_code(0x0000) - not-present page
[ 55.500555] PGD a4fa9067 P4D a4fa9067 PUD a4fa5067 PMD 1b44067 PTE 0
[ 55.501499] Oops: 0000 [#1] PREEMPT SMP KASAN NOPTI
[ 55.502195] CPU: 0 PID: 83 Comm: kworker/0:2 Tainted: G OE 5.16.0-rc4+ #151
[ 55.503388] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ArchLinux 1.15.0-1 04/01/2014
[ 55.504777] Workqueue: events bpf_prog_free_deferred
[ 55.505563] RIP: 0010:kasan_check_range+0x184/0x1d0
[ 55.509140] RSP: 0018:ffff88800560fcf0 EFLAGS: 00010282
[ 55.509977] RAX: fffffbfff802548b RBX: fffffbfff802548c RCX: ffffffff9337b6ba
[ 55.511096] RDX: fffffbfff802548c RSI: 0000000000000004 RDI: ffffffffc012a458
[ 55.512143] RBP: fffffbfff802548b R08: 0000000000000001 R09: ffffffffc012a45b
[ 55.513228] R10: fffffbfff802548b R11: 0000000000000001 R12: ffff888001b5f598
[ 55.514332] R13: ffff888004f49ac8 R14: 0000000000000000 R15: ffff888092449400
[ 55.515418] FS: 0000000000000000(0000) GS:ffff888092400000(0000) knlGS:0000000000000000
[ 55.516705] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 55.517560] CR2: fffffbfff802548b CR3: 0000000007c10006 CR4: 0000000000770ef0
[ 55.518672] PKRU: 55555554
[ 55.519022] Call Trace:
[ 55.519483] <TASK>
[ 55.519884] module_put.part.0+0x2a/0x180
[ 55.520642] bpf_prog_free_deferred+0x129/0x2e0
[ 55.521478] process_one_work+0x4fa/0x9e0
[ 55.522122] ? pwq_dec_nr_in_flight+0x100/0x100
[ 55.522878] ? rwlock_bug.part.0+0x60/0x60
[ 55.523551] worker_thread+0x2eb/0x700
[ 55.524176] ? __kthread_parkme+0xd8/0xf0
[ 55.524853] ? process_one_work+0x9e0/0x9e0
[ 55.525544] kthread+0x23a/0x270
[ 55.526088] ? set_kthread_struct+0x80/0x80
[ 55.526798] ret_from_fork+0x1f/0x30
[ 55.527413] </TASK>
[ 55.527813] Modules linked in: bpf_testmod(OE) [last unloaded: bpf_testmod]
[ 55.530846] CR2: fffffbfff802548b
[ 55.531341] ---[ end trace 1af41803c054ad6d ]---
[ 55.532136] RIP: 0010:kasan_check_range+0x184/0x1d0
[ 55.535887] RSP: 0018:ffff88800560fcf0 EFLAGS: 00010282
[ 55.536711] RAX: fffffbfff802548b RBX: fffffbfff802548c RCX: ffffffff9337b6ba
[ 55.537821] RDX: fffffbfff802548c RSI: 0000000000000004 RDI: ffffffffc012a458
[ 55.538899] RBP: fffffbfff802548b R08: 0000000000000001 R09: ffffffffc012a45b
[ 55.539928] R10: fffffbfff802548b R11: 0000000000000001 R12: ffff888001b5f598
[ 55.541021] R13: ffff888004f49ac8 R14: 0000000000000000 R15: ffff888092449400
[ 55.542108] FS: 0000000000000000(0000) GS:ffff888092400000(0000) knlGS:0000000000000000
[ 55.543260]CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 55.544136] CR2: fffffbfff802548b CR3: 0000000007c10006 CR4: 0000000000770ef0
[ 55.545317] PKRU: 55555554
[ 55.545671] note: kworker/0:2[83] exited with preempt_count 1
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220114163953.1455836-11-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Use the prog_test kfuncs to test the referenced PTR_TO_BTF_ID kfunc
support, and PTR_TO_CTX, PTR_TO_MEM argument passing support. Also
testing the various failure cases for invalid kfunc prototypes.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220114163953.1455836-10-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Completely remove the old code for check_kfunc_call to help it work
with modules, and also the callback itself.
The previous commit adds infrastructure to register all sets and put
them in vmlinux or module BTF, and concatenates all related sets
organized by the hook and the type. Once populated, these sets remain
immutable for the lifetime of the struct btf.
Also, since we don't need the 'owner' module anywhere when doing
check_kfunc_call, drop the 'btf_modp' module parameter from
find_kfunc_desc_btf.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220114163953.1455836-4-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Currently the test of BPF STRUCT_OPS depends on the specific bpf
implementation of tcp_congestion_ops, but it can not cover all
basic functionalities (e.g, return value handling), so introduce
a dummy BPF STRUCT_OPS for test purpose.
Loading a bpf_dummy_ops implementation from userspace is prohibited,
and its only purpose is to run BPF_PROG_TYPE_STRUCT_OPS program
through bpf(BPF_PROG_TEST_RUN). Now programs for test_1() & test_2()
are supported. The following three cases are exercised in
bpf_dummy_struct_ops_test_run():
(1) test and check the value returned from state arg in test_1(state)
The content of state is copied from userspace pointer and copied back
after calling test_1(state). The user pointer is saved in an u64 array
and the array address is passed through ctx_in.
(2) test and check the return value of test_1(NULL)
Just simulate the case in which an invalid input argument is passed in.
(3) test multiple arguments passing in test_2(state, ...)
5 arguments are passed through ctx_in in form of u64 array. The first
element of array is userspace pointer of state and others 4 arguments
follow.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20211025064025.2567443-4-houtao1@huawei.com
|
|
This patch fixes the following Coccinelle warning:
net/bpf/test_run.c:361:8-15: WARNING opportunity for memdup_user
net/bpf/test_run.c:1055:8-15: WARNING opportunity for memdup_user
Use memdup_user rather than duplicating its implementation
This is a little bit restricted to reduce false positives
Signed-off-by: Qing Wang <wangqing@vivo.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/1634556651-38702-1-git-send-email-wangqing@vivo.com
|
|
This adds selftests that tests the success and failure path for modules
kfuncs (in presence of invalid kfunc calls) for both libbpf and
gen_loader. It also adds a prog_test kfunc_btf_id_list so that we can
add module BTF ID set from bpf_testmod.
This also introduces a couple of test cases to verifier selftests for
validating whether we get an error or not depending on if invalid kfunc
call remains after elimination of unreachable instructions.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-10-memxor@gmail.com
|
|
This change adds support on the kernel side to allow for BPF programs to
call kernel module functions. Userspace will prepare an array of module
BTF fds that is passed in during BPF_PROG_LOAD using fd_array parameter.
In the kernel, the module BTFs are placed in the auxilliary struct for
bpf_prog, and loaded as needed.
The verifier then uses insn->off to index into the fd_array. insn->off
0 is reserved for vmlinux BTF (for backwards compat), so userspace must
use an fd_array index > 0 for module kfunc support. kfunc_btf_tab is
sorted based on offset in an array, and each offset corresponds to one
descriptor, with a max limit up to 256 such module BTFs.
We also change existing kfunc_tab to distinguish each element based on
imm, off pair as each such call will now be distinct.
Another change is to check_kfunc_call callback, which now include a
struct module * pointer, this is to be used in later patch such that the
kfunc_id and module pointer are matched for dynamically registered BTF
sets from loadable modules, so that same kfunc_id in two modules doesn't
lead to check_kfunc_call succeeding. For the duration of the
check_kfunc_call, the reference to struct module exists, as it returns
the pointer stored in kfunc_btf_tab.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-2-memxor@gmail.com
|
