summaryrefslogtreecommitdiff
path: root/net/can
AgeCommit message (Collapse)AuthorFilesLines
2021-08-05net: Remove redundant if statementsYajun Deng1-6/+2
The 'if (dev)' statement already move into dev_{put , hold}, so remove redundant if statements. Signed-off-by: Yajun Deng <yajun.deng@linux.dev> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-04can: j1939: extend UAPI to notify about RX statusOleksij Rempel3-34/+127
To be able to create applications with user friendly feedback, we need be able to provide receive status information. Typical ETP transfer may take seconds or even hours. To give user some clue or show a progress bar, the stack should push status updates. Same as for the TX information, the socket error queue will be used with following new signals: - J1939_EE_INFO_RX_RTS - received and accepted request to send signal. - J1939_EE_INFO_RX_DPO - received data package offset signal - J1939_EE_INFO_RX_ABORT - RX session was aborted Instead of completion signal, user will get data package. To activate this signals, application should set SOF_TIMESTAMPING_RX_SOFTWARE to the SO_TIMESTAMPING socket option. This will avoid unpredictable application behavior for the old software. Link: https://lore.kernel.org/r/20210707094854.30781-3-o.rempel@pengutronix.de Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-08-04can: j1939: rename J1939_ERRQUEUE_* to J1939_ERRQUEUE_TX_*Oleksij Rempel3-10/+10
Prepare the world for the J1939_ERRQUEUE_RX_ version Link: https://lore.kernel.org/r/20210707094854.30781-2-o.rempel@pengutronix.de Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-08-03can: j1939: j1939_session_tx_dat(): fix typoMarc Kleine-Budde1-1/+1
This patch fixes a typo in the j1939_session_tx_dat() function. Link: https://lore.kernel.org/r/20210729113917.1655492-1-mkl@pengutronix.de Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-5/+26
Conflicting commits, all resolutions pretty trivial: drivers/bus/mhi/pci_generic.c 5c2c85315948 ("bus: mhi: pci-generic: configurable network interface MRU") 56f6f4c4eb2a ("bus: mhi: pci_generic: Apply no-op for wake using sideband wake boolean") drivers/nfc/s3fwrn5/firmware.c a0302ff5906a ("nfc: s3fwrn5: remove unnecessary label") 46573e3ab08f ("nfc: s3fwrn5: fix undefined parameter values in dev_err()") 801e541c79bb ("nfc: s3fwrn5: fix undefined parameter values in dev_err()") MAINTAINERS 7d901a1e878a ("net: phy: add Maxlinear GPY115/21x/24x driver") 8a7b46fa7902 ("MAINTAINERS: add Yasushi SHOJI as reviewer for the Microchip CAN BUS Analyzer Tool driver") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-07-25can: j1939: j1939_xtp_rx_dat_one(): use separate pointer for session skb ↵Marc Kleine-Budde1-4/+4
control buffer In the j1939_xtp_rx_dat_one() function, there are 2 variables (skb and se_skb) holding a skb. The control buffer of the skbs is accessed one after the other, but using the same "skcb" variable. To avoid confusion introduce a new variable "se_skcb" to access the se_skb's control buffer as done in the rest of this file, too. Cc: Robin van der Gracht <robin@protonic.nl> Cc: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20210616102811.2449426-6-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: j1939: j1939_session_tx_dat(): use consistent name se_skcb for session ↵Marc Kleine-Budde1-4/+4
skb control buffer This patch changes the name of the "skcb" variable in j1939_session_tx_dat() to "se_skcb" as it's the session skb's control buffer. The same name is used in other functions for the session skb's control buffer. Cc: Robin van der Gracht <robin@protonic.nl> Cc: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20210616102811.2449426-5-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: j1939: j1939_session_completed(): use consistent name se_skb for the ↵Marc Kleine-Budde1-4/+4
session skb This patch changes the name of the "skb" variable in j1939_session_completed() to "se_skb" as it's the session skb. The same name is used in other functions for the session skb. Cc: Robin van der Gracht <robin@protonic.nl> Cc: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20210616102811.2449426-4-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: j1939: replace fall through comment by fallthrough pseudo-keywordMarc Kleine-Budde1-5/+10
Replace the existing /* fall through */ comments the new pseudo-keyword macro fallthrough. Cc: Robin van der Gracht <robin@protonic.nl> Cc: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20210616102811.2449426-3-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: j1939: fix checkpatch warningsMarc Kleine-Budde1-2/+3
This patch fixes a checkpatch warning about a long line and wrong indention. Cc: Robin van der Gracht <robin@protonic.nl> Cc: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20210616102811.2449426-2-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: j1939: j1939_sk_sock_destruct(): correct a grammatical errorgushengxian1-1/+1
Correct a grammatical error. Link: https://lore.kernel.org/r/20210611043933.17047-1-13145886936@163.com Signed-off-by: gushengxian <gushengxian@yulong.com> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-24can: j1939: j1939_xtp_rx_dat_one(): fix rxtimer value between consecutive ↵Zhang Changzhong1-1/+1
TP.DT to 750ms For receive side, the max time interval between two consecutive TP.DT should be 750ms. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Link: https://lore.kernel.org/r/1625569210-47506-1-git-send-email-zhangchangzhong@huawei.com Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-24can: j1939: j1939_session_deactivate(): clarify lifetime of session objectOleksij Rempel1-2/+7
The j1939_session_deactivate() is decrementing the session ref-count and potentially can free() the session. This would cause use-after-free situation. However, the code calling j1939_session_deactivate() does always hold another reference to the session, so that it would not be free()ed in this code path. This patch adds a comment to make this clear and a WARN_ON, to ensure that future changes will not violate this requirement. Further this patch avoids dereferencing the session pointer as a precaution to avoid use-after-free if the session is actually free()ed. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Link: https://lore.kernel.org/r/20210714111602.24021-1-o.rempel@pengutronix.de Reported-by: Xiaochen Zou <xzou017@ucr.edu> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-24can: raw: raw_setsockopt(): fix raw_rcv panic for sock UAFZiyang Xuan1-2/+18
We get a bug during ltp can_filter test as following. =========================================== [60919.264984] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 [60919.265223] PGD 8000003dda726067 P4D 8000003dda726067 PUD 3dda727067 PMD 0 [60919.265443] Oops: 0000 [#1] SMP PTI [60919.265550] CPU: 30 PID: 3638365 Comm: can_filter Kdump: loaded Tainted: G W 4.19.90+ #1 [60919.266068] RIP: 0010:selinux_socket_sock_rcv_skb+0x3e/0x200 [60919.293289] RSP: 0018:ffff8d53bfc03cf8 EFLAGS: 00010246 [60919.307140] RAX: 0000000000000000 RBX: 000000000000001d RCX: 0000000000000007 [60919.320756] RDX: 0000000000000001 RSI: ffff8d5104a8ed00 RDI: ffff8d53bfc03d30 [60919.334319] RBP: ffff8d9338056800 R08: ffff8d53bfc29d80 R09: 0000000000000001 [60919.347969] R10: ffff8d53bfc03ec0 R11: ffffb8526ef47c98 R12: ffff8d53bfc03d30 [60919.350320] perf: interrupt took too long (3063 > 2500), lowering kernel.perf_event_max_sample_rate to 65000 [60919.361148] R13: 0000000000000001 R14: ffff8d53bcf90000 R15: 0000000000000000 [60919.361151] FS: 00007fb78b6b3600(0000) GS:ffff8d53bfc00000(0000) knlGS:0000000000000000 [60919.400812] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [60919.413730] CR2: 0000000000000010 CR3: 0000003e3f784006 CR4: 00000000007606e0 [60919.426479] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [60919.439339] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [60919.451608] PKRU: 55555554 [60919.463622] Call Trace: [60919.475617] <IRQ> [60919.487122] ? update_load_avg+0x89/0x5d0 [60919.498478] ? update_load_avg+0x89/0x5d0 [60919.509822] ? account_entity_enqueue+0xc5/0xf0 [60919.520709] security_sock_rcv_skb+0x2a/0x40 [60919.531413] sk_filter_trim_cap+0x47/0x1b0 [60919.542178] ? kmem_cache_alloc+0x38/0x1b0 [60919.552444] sock_queue_rcv_skb+0x17/0x30 [60919.562477] raw_rcv+0x110/0x190 [can_raw] [60919.572539] can_rcv_filter+0xbc/0x1b0 [can] [60919.582173] can_receive+0x6b/0xb0 [can] [60919.591595] can_rcv+0x31/0x70 [can] [60919.600783] __netif_receive_skb_one_core+0x5a/0x80 [60919.609864] process_backlog+0x9b/0x150 [60919.618691] net_rx_action+0x156/0x400 [60919.627310] ? sched_clock_cpu+0xc/0xa0 [60919.635714] __do_softirq+0xe8/0x2e9 [60919.644161] do_softirq_own_stack+0x2a/0x40 [60919.652154] </IRQ> [60919.659899] do_softirq.part.17+0x4f/0x60 [60919.667475] __local_bh_enable_ip+0x60/0x70 [60919.675089] __dev_queue_xmit+0x539/0x920 [60919.682267] ? finish_wait+0x80/0x80 [60919.689218] ? finish_wait+0x80/0x80 [60919.695886] ? sock_alloc_send_pskb+0x211/0x230 [60919.702395] ? can_send+0xe5/0x1f0 [can] [60919.708882] can_send+0xe5/0x1f0 [can] [60919.715037] raw_sendmsg+0x16d/0x268 [can_raw] It's because raw_setsockopt() concurrently with unregister_netdevice_many(). Concurrent scenario as following. cpu0 cpu1 raw_bind raw_setsockopt unregister_netdevice_many unlist_netdevice dev_get_by_index raw_notifier raw_enable_filters ...... can_rx_register can_rcv_list_find(..., net->can.rx_alldev_list) ...... sock_close raw_release(sock_a) ...... can_receive can_rcv_filter(net->can.rx_alldev_list, ...) raw_rcv(skb, sock_a) BUG After unlist_netdevice(), dev_get_by_index() return NULL in raw_setsockopt(). Function raw_enable_filters() will add sock and can_filter to net->can.rx_alldev_list. Then the sock is closed. Followed by, we sock_sendmsg() to a new vcan device use the same can_filter. Protocol stack match the old receiver whose sock has been released on net->can.rx_alldev_list in can_rcv_filter(). Function raw_rcv() uses the freed sock. UAF BUG is triggered. We can find that the key issue is that net_device has not been protected in raw_setsockopt(). Use rtnl_lock to protect net_device in raw_setsockopt(). Fixes: c18ce101f2e4 ("[CAN]: Add raw protocol") Link: https://lore.kernel.org/r/20210722070819.1048263-1-william.xuanziyang@huawei.com Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-06-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski5-5/+21
Trivial conflict in net/netfilter/nf_tables_api.c. Duplicate fix in tools/testing/selftests/net/devlink_port_split.py - take the net-next version. skmsg, and L4 bpf - keep the bpf code but remove the flags and err params. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-06-29net: sock: introduce sk_error_reportAlexander Aring4-17/+17
This patch introduces a function wrapper to call the sk_error_report callback. That will prepare to add additional handling whenever sk_error_report is called, for example to trace socket errors. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-24can: j1939: j1939_sk_setsockopt(): prevent allocation of j1939 filter for ↵Norbert Slusarek1-1/+1
optlen == 0 If optval != NULL and optlen == 0 are specified for SO_J1939_FILTER in j1939_sk_setsockopt(), memdup_sockptr() will return ZERO_PTR for 0 size allocation. The new filter will be mistakenly assigned ZERO_PTR. This patch checks for optlen != 0 and filter will be assigned NULL in case of optlen == 0. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Link: https://lore.kernel.org/r/20210620123842.117975-1-nslusarek@gmx.net Signed-off-by: Norbert Slusarek <nslusarek@gmx.net> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-06-20can: j1939: j1939_sk_init(): set SOCK_RCU_FREE to call sk_destruct() after ↵Oleksij Rempel2-0/+7
RCU is done Set SOCK_RCU_FREE to let RCU to call sk_destruct() on completion. Without this patch, we will run in to j1939_can_recv() after priv was freed by j1939_sk_release()->j1939_sk_sock_destruct() Fixes: 25fe97cb7620 ("can: j1939: move j1939_priv_put() into sk_destruct callback") Link: https://lore.kernel.org/r/20210617130623.12705-1-o.rempel@pengutronix.de Cc: linux-stable <stable@vger.kernel.org> Reported-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Reported-by: syzbot+bdf710cfc41c186fdff3@syzkaller.appspotmail.com Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-06-20can: isotp: isotp_release(): omit unintended hrtimer restart on socket releaseOliver Hartkopp1-3/+4
When closing the isotp socket, the potentially running hrtimers are canceled before removing the subscription for CAN identifiers via can_rx_unregister(). This may lead to an unintended (re)start of a hrtimer in isotp_rcv_cf() and isotp_rcv_fc() in the case that a CAN frame is received by isotp_rcv() while the subscription removal is processed. However, isotp_rcv() is called under RCU protection, so after calling can_rx_unregister, we may call synchronize_rcu in order to wait for any RCU read-side critical sections to finish. This prevents the reception of CAN frames after hrtimer_cancel() and therefore the unintended (re)start of the hrtimers. Link: https://lore.kernel.org/r/20210618173713.2296-1-socketcan@hartkopp.net Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol") Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-06-20can: gw: synchronize rcu operations before removing gw job entryOliver Hartkopp1-0/+3
can_can_gw_rcv() is called under RCU protection, so after calling can_rx_unregister(), we have to call synchronize_rcu in order to wait for any RCU read-side critical sections to finish before removing the kmem_cache entry with the referenced gw job entry. Link: https://lore.kernel.org/r/20210618173645.2238-1-socketcan@hartkopp.net Fixes: c1aabdf379bc ("can-gw: add netlink based CAN routing") Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-06-20can: bcm: delay release of struct bcm_op after synchronize_rcu()Thadeu Lima de Souza Cascardo1-1/+6
can_rx_register() callbacks may be called concurrently to the call to can_rx_unregister(). The callbacks and callback data, though, are protected by RCU and the struct sock reference count. So the callback data is really attached to the life of sk, meaning that it should be released on sk_destruct. However, bcm_remove_op() calls tasklet_kill(), and RCU callbacks may be called under RCU softirq, so that cannot be used on kernels before the introduction of HRTIMER_MODE_SOFT. However, bcm_rx_handler() is called under RCU protection, so after calling can_rx_unregister(), we may call synchronize_rcu() in order to wait for any RCU read-side critical sections to finish. That is, bcm_rx_handler() won't be called anymore for those ops. So, we only free them, after we do that synchronize_rcu(). Fixes: ffd980f976e7 ("[CAN]: Add broadcast manager (bcm) protocol") Link: https://lore.kernel.org/r/20210619161813.2098382-1-cascardo@canonical.com Cc: linux-stable <stable@vger.kernel.org> Reported-by: syzbot+0f7e7e5e2f4f40fa89c0@syzkaller.appspotmail.com Reported-by: Norbert Slusarek <nslusarek@gmx.net> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-06-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski4-54/+185
Trivial conflicts in net/can/isotp.c and tools/testing/selftests/net/mptcp/mptcp_connect.sh scaled_ppm_to_ppb() was moved from drivers/ptp/ptp_clock.c to include/linux/ptp_clock_kernel.h in -next so re-apply the fix there. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-06-16can: bcm: fix infoleak in struct bcm_msg_headNorbert Slusarek1-0/+3
On 64-bit systems, struct bcm_msg_head has an added padding of 4 bytes between struct members count and ival1. Even though all struct members are initialized, the 4-byte hole will contain data from the kernel stack. This patch zeroes out struct bcm_msg_head before usage, preventing infoleaks to userspace. Fixes: ffd980f976e7 ("[CAN]: Add broadcast manager (bcm) protocol") Link: https://lore.kernel.org/r/trinity-7c1b2e82-e34f-4885-8060-2cd7a13769ce-1623532166177@3c-app-gmx-bs52 Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Norbert Slusarek <nslusarek@gmx.net> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-06-16can: bcm/raw/isotp: use per module netdevice notifierTetsuo Handa3-40/+142
syzbot is reporting hung task at register_netdevice_notifier() [1] and unregister_netdevice_notifier() [2], for cleanup_net() might perform time consuming operations while CAN driver's raw/bcm/isotp modules are calling {register,unregister}_netdevice_notifier() on each socket. Change raw/bcm/isotp modules to call register_netdevice_notifier() from module's __init function and call unregister_netdevice_notifier() from module's __exit function, as with gw/j1939 modules are doing. Link: https://syzkaller.appspot.com/bug?id=391b9498827788b3cc6830226d4ff5be87107c30 [1] Link: https://syzkaller.appspot.com/bug?id=1724d278c83ca6e6df100a2e320c10d991cf2bce [2] Link: https://lore.kernel.org/r/54a5f451-05ed-f977-8534-79e7aa2bcc8f@i-love.sakura.ne.jp Cc: linux-stable <stable@vger.kernel.org> Reported-by: syzbot <syzbot+355f8edb2ff45d5f95fa@syzkaller.appspotmail.com> Reported-by: syzbot <syzbot+0f1827363a305f74996f@syzkaller.appspotmail.com> Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com> Tested-by: syzbot <syzbot+355f8edb2ff45d5f95fa@syzkaller.appspotmail.com> Tested-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-06-16can: j1939: fix Use-after-Free, hold skb ref while in useOleksij Rempel1-14/+40
This patch fixes a Use-after-Free found by the syzbot. The problem is that a skb is taken from the per-session skb queue, without incrementing the ref count. This leads to a Use-after-Free if the skb is taken concurrently from the session queue due to a CTS. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Link: https://lore.kernel.org/r/20210521115720.7533-1-o.rempel@pengutronix.de Cc: Hillf Danton <hdanton@sina.com> Cc: linux-stable <stable@vger.kernel.org> Reported-by: syzbot+220c1a29987a9a490903@syzkaller.appspotmail.com Reported-by: syzbot+45199c1b73b4013525cf@syzkaller.appspotmail.com Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-05-28Merge tag 'linux-can-next-for-5.14-20210527' of ↵Jakub Kicinski2-14/+12
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== can-next 2021-05-27 The first 2 patches are by Geert Uytterhoeven and convert the rcan_can and rcan_canfd device tree bindings to yaml. The next 2 patches are by Oliver Hartkopp and me and update the CAN uapi headers. zuoqilin's patch removes an unnecessary variable from the CAN proc code. Patrick Menschel contributes 3 patches for CAN ISOTP to enhance the error messages. Jiapeng Chong's patch removes two dead stores from the softing driver. The next 4 patches are by me and silence several warnings found by clang compiler. Jimmy Assarsson's patches for the kvaser_usb driver add support for the Kvaser hydra devices. Dario Binacchi provides 2 patches for the c_can driver, first removing an unused variable, then adding basic ethtool support to query driver and ring parameter info. The last 4 patches are by Torin Cooper-Bennun and clean up the m_can driver. * tag 'linux-can-next-for-5.14-20210527' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (21 commits) can: m_can: fix whitespace in a few comments can: m_can: make TXESC, RXESC config more explicit can: m_can: clean up CCCR reg defs, order by revs can: m_can: use bits.h macros for all regmasks can: c_can: add ethtool support can: c_can: remove unused variable struct c_can_priv::rxmasked can: kvaser_usb: Add new Kvaser hydra devices can: kvaser_usb: Rename define USB_HYBRID_{,PRO_}CANLIN_PRODUCT_ID can: at91_can: silence clang warning can: mcp251xfd: silence clang warning can: mcp251x: mcp251x_can_probe(): silence clang warning can: hi311x: hi3110_can_probe(): silence clang warning can: softing: Remove redundant variable ptr can: isotp: Add error message if txqueuelen is too small can: isotp: add symbolic error message to isotp_module_init() can: isotp: change error format from decimal to symbolic error names can: proc: remove unnecessary variables can: uapi: introduce CANFD_FDF flag for mixed content in struct canfd_frame can: uapi: update CAN-FD frame description dt-bindings: can: rcar_canfd: Convert to json-schema ... ==================== Link: https://lore.kernel.org/r/20210527084532.1384031-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-05-27can: isotp: Add error message if txqueuelen is too smallPatrick Menschel1-2/+4
This patch adds an additional error message in case that txqueuelen is set too small and advices the user to increase txqueuelen. This is likely to happen even with small transfers if txqueuelen is at default value 10 frames. Link: https://lore.kernel.org/r/20210427052150.2308-4-menschel.p@posteo.de Signed-off-by: Patrick Menschel <menschel.p@posteo.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-05-27can: isotp: add symbolic error message to isotp_module_init()Patrick Menschel1-1/+1
This patch adds the value of err with format %pe to the already existing error message. Link: https://lore.kernel.org/r/20210427052150.2308-3-menschel.p@posteo.de Signed-off-by: Patrick Menschel <menschel.p@posteo.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-05-27can: isotp: change error format from decimal to symbolic error namesPatrick Menschel1-6/+6
This patch changes the format string for errors from decimal %d to symbolic error names %pe to achieve more comprehensive log messages. Link: https://lore.kernel.org/r/20210427052150.2308-2-menschel.p@posteo.de Signed-off-by: Patrick Menschel <menschel.p@posteo.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-05-27can: proc: remove unnecessary variableszuoqilin1-5/+1
There is no need to define the variable "rate" to receive, just return directly. Link: https://lore.kernel.org/r/20210514100806.792-1-zuoqilin1@163.com Signed-off-by: zuoqilin <zuoqilin@yulong.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-05-12can: isotp: prevent race between isotp_bind() and isotp_setsockopt()Norbert Slusarek1-16/+33
A race condition was found in isotp_setsockopt() which allows to change socket options after the socket was bound. For the specific case of SF_BROADCAST support, this might lead to possible use-after-free because can_rx_unregister() is not called. Checking for the flag under the socket lock in isotp_bind() and taking the lock in isotp_setsockopt() fixes the issue. Fixes: 921ca574cd38 ("can: isotp: add SF_BROADCAST support for functional addressing") Link: https://lore.kernel.org/r/trinity-e6ae9efa-9afb-4326-84c0-f3609b9b8168-1620773528307@3c-app-gmx-bs06 Reported-by: Norbert Slusarek <nslusarek@gmx.net> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Signed-off-by: Norbert Slusarek <nslusarek@gmx.net> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-04-25can: proc: fix rcvlist_* header alignment on 64-bit systemErik Flodin1-2/+4
Before this fix, the function and userdata columns weren't aligned: device can_id can_mask function userdata matches ident vcan0 92345678 9fffffff 0000000000000000 0000000000000000 0 raw vcan0 123 00000123 0000000000000000 0000000000000000 0 raw After the fix they are: device can_id can_mask function userdata matches ident vcan0 92345678 9fffffff 0000000000000000 0000000000000000 0 raw vcan0 123 00000123 0000000000000000 0000000000000000 0 raw Link: Link: https://lore.kernel.org/r/20210425141440.229653-1-erik@flodin.me Signed-off-by: Erik Flodin <erik@flodin.me> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-03-29can: isotp: fix msg_namelen values depending on CAN_REQUIRED_SIZEOliver Hartkopp1-4/+7
Since commit f5223e9eee65 ("can: extend sockaddr_can to include j1939 members") the sockaddr_can has been extended in size and a new CAN_REQUIRED_SIZE macro has been introduced to calculate the protocol specific needed size. The ABI for the msg_name and msg_namelen has not been adapted to the new CAN_REQUIRED_SIZE macro for the other CAN protocols which leads to a problem when an existing binary reads the (increased) struct sockaddr_can in msg_name. Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol") Reported-by: Richard Weinberger <richard@nod.at> Acked-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be> Link: https://lore.kernel.org/linux-can/1135648123.112255.1616613706554.JavaMail.zimbra@nod.at/T/#t Link: https://lore.kernel.org/r/20210325125850.1620-2-socketcan@hartkopp.net Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-03-29can: bcm/raw: fix msg_namelen values depending on CAN_REQUIRED_SIZEOliver Hartkopp2-10/+14
Since commit f5223e9eee65 ("can: extend sockaddr_can to include j1939 members") the sockaddr_can has been extended in size and a new CAN_REQUIRED_SIZE macro has been introduced to calculate the protocol specific needed size. The ABI for the msg_name and msg_namelen has not been adapted to the new CAN_REQUIRED_SIZE macro for the other CAN protocols which leads to a problem when an existing binary reads the (increased) struct sockaddr_can in msg_name. Fixes: f5223e9eee65 ("can: extend sockaddr_can to include j1939 members") Reported-by: Richard Weinberger <richard@nod.at> Tested-by: Richard Weinberger <richard@nod.at> Acked-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be> Link: https://lore.kernel.org/linux-can/1135648123.112255.1616613706554.JavaMail.zimbra@nod.at/T/#t Link: https://lore.kernel.org/r/20210325125850.1620-1-socketcan@hartkopp.net Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-03-20can: isotp: tx-path: zero initialize outgoing CAN framesOliver Hartkopp1-3/+3
Commit d4eb538e1f48 ("can: isotp: TX-path: ensure that CAN frame flags are initialized") ensured the TX flags to be properly set for outgoing CAN frames. In fact the root cause of the issue results from a missing initialization of outgoing CAN frames created by isotp. This is no problem on the CAN bus as the CAN driver only picks the correctly defined content from the struct can(fd)_frame. But when the outgoing frames are monitored (e.g. with candump) we potentially leak some bytes in the unused content of struct can(fd)_frame. Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol") Cc: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/r/20210319100619.10858-1-socketcan@hartkopp.net Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-03-16can: isotp: TX-path: ensure that CAN frame flags are initializedMarc Kleine-Budde1-6/+3
The previous patch ensures that the TX flags (struct can_isotp_ll_options::tx_flags) are 0 for classic CAN frames or a user configured value for CAN-FD frames. This patch sets the CAN frames flags unconditionally to the ISO-TP TX flags, so that they are initialized to a proper value. Otherwise when running "candump -x" on a classical CAN ISO-TP stream shows wrongly set "B" and "E" flags. | $ candump any,0:0,#FFFFFFFF -extA | [...] | can0 TX B E 713 [8] 2B 0A 0B 0C 0D 0E 0F 00 | can0 TX B E 713 [8] 2C 01 02 03 04 05 06 07 | can0 TX B E 713 [8] 2D 08 09 0A 0B 0C 0D 0E | can0 TX B E 713 [8] 2E 0F 00 01 02 03 04 05 Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol") Link: https://lore.kernel.org/r/20210218215434.1708249-2-mkl@pengutronix.de Cc: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-03-16can: isotp: isotp_setsockopt(): only allow to set low level TX flags for CAN-FDMarc Kleine-Budde1-1/+2
CAN-FD frames have struct canfd_frame::flags, while classic CAN frames don't. This patch refuses to set TX flags (struct can_isotp_ll_options::tx_flags) on non CAN-FD isotp sockets. Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol") Link: https://lore.kernel.org/r/20210218215434.1708249-2-mkl@pengutronix.de Cc: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-02-25net: introduce CAN specific pointer in the struct net_deviceOleksij Rempel4-61/+27
Since 20dd3850bcf8 ("can: Speed up CAN frame receiption by using ml_priv") the CAN framework uses per device specific data in the AF_CAN protocol. For this purpose the struct net_device->ml_priv is used. Later the ml_priv usage in CAN was extended for other users, one of them being CAN_J1939. Later in the kernel ml_priv was converted to an union, used by other drivers. E.g. the tun driver started storing it's stats pointer. Since tun devices can claim to be a CAN device, CAN specific protocols will wrongly interpret this pointer, which will cause system crashes. Mostly this issue is visible in the CAN_J1939 stack. To fix this issue, we request a dedicated CAN pointer within the net_device struct. Reported-by: syzbot+5138c4dd15a0401bec7b@syzkaller.appspotmail.com Fixes: 20dd3850bcf8 ("can: Speed up CAN frame receiption by using ml_priv") Fixes: ffd956eef69b ("can: introduce CAN midlayer private and allocate it automatically") Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Fixes: 497a5757ce4e ("tun: switch to net core provided statistics counters") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20210223070127.4538-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28Merge tag 'linux-can-next-for-5.12-20210127' of ↵Jakub Kicinski1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2021-01-27 The first two patches are by me and fix typos on the CAN gw protocol and the flexcan driver. The next patch is by Vincent Mailhol and targets the CAN driver infrastructure, it exports the function that converts the CAN state into a human readable string. A patch by me, which target the CAN driver infrastructure, too, makes the calculation in can_fd_len2dlc() more readable. A patch by Tom Rix fixes a checkpatch warning in the mcba_usb driver. The next seven patches target the mcp251xfd driver. Su Yanjun's patch replaces several hardcoded assumptions when calling regmap, by using regmap_get_val_bytes(). The remaining patches are by me. First an open coded check is replaced by an existing helper function, then in the TX path the padding for CAN-FD frames is cleaned up. The next two patches clean up the RTR frame handling in the RX and TX path. Then support for len8_dlc is added. The last patch adds BQL support. * tag 'linux-can-next-for-5.12-20210127' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: can: mcp251xfd: add BQL support can: mcp251xfd: add len8_dlc support can: mcp251xfd: mcp251xfd_tx_obj_from_skb(): don't copy data for RTR CAN frames in TX-path can: mcp251xfd: mcp251xfd_hw_rx_obj_to_skb(): don't copy data for RTR CAN frames in RX-path can: mcp251xfd: mcp251xfd_tx_obj_from_skb(): clean up padding of CAN-FD frames can: mcp251xfd: mcp251xfd_start_xmit(): use mcp251xfd_get_tx_free() to check TX is is full can: mcp251xfd: replace sizeof(u32) with val_bytes in regmap can: mcba_usb: remove h from printk format specifier can: length: can_fd_len2dlc(): make legnth calculation readable again can: dev: export can_get_state_str() function can: flexcan: fix typos can: gw: fix typo ==================== Link: https://lore.kernel.org/r/20210127092227.2775573-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28net: remove redundant 'depends on NET'Masahiro Yamada1-1/+0
These Kconfig files are included from net/Kconfig, inside the if NET ... endif. Remove 'depends on NET', which we know it is already met. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Link: https://lore.kernel.org/r/20210125232026.106855-1-masahiroy@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-27can: gw: fix typoMarc Kleine-Budde1-1/+1
This patch fixes a typo found by codespell. Fixes: 94c23097f991 ("can: gw: support modification of Classical CAN DLCs") Link: https://lore.kernel.org/r/20210127085529.2768537-3-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-01-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+1
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-14can: isotp: isotp_getname(): fix kernel information leakOliver Hartkopp1-0/+1
Initialize the sockaddr_can structure to prevent a data leak to user space. Suggested-by: Cong Wang <xiyou.wangcong@gmail.com> Reported-by: syzbot+057884e2f453e8afebc8@syzkaller.appspotmail.com Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol") Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/r/20210112091643.11789-1-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-01-06can: raw: return -ERANGE when filterset does not fit into user space bufferOliver Hartkopp1-4/+12
Multiple filters (struct can_filter) can be set with the setsockopt() function, which was originally intended as a write-only operation. As getsockopt() also provides a CAN_RAW_FILTER option to read back the given filters, the caller has to provide an appropriate user space buffer. In the case this buffer is too small the getsockopt() silently truncates the filter information and gives no information about the needed space. This is safe but not convenient for the programmer. In net/core/sock.c the SO_PEERGROUPS sockopt had a similar requirement and solved it by returning -ERANGE in the case that the provided data does not fit into the given user space buffer and fills the required size into optlen, so that the caller can retry with a matching buffer length. This patch adopts this approach for CAN_RAW_FILTER getsockopt(). Reported-by: Phillip Schichtel <phillip@schich.tel> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Tested-By: Phillip Schichtel <phillip@schich.tel> Link: https://lore.kernel.org/r/20201216174928.21663-1-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-12-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+3
xdp_return_frame_bulk() needs to pass a xdp_buff to __xdp_return(). strlcpy got converted to strscpy but here it makes no functional difference, so just keep the right code. Conflicts: net/netfilter/nf_tables_api.c Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-10can: isotp: add SF_BROADCAST support for functional addressingOliver Hartkopp1-13/+29
When CAN_ISOTP_SF_BROADCAST is set in the CAN_ISOTP_OPTS flags the CAN_ISOTP socket is switched into functional addressing mode, where only single frame (SF) protocol data units can be send on the specified CAN interface and the given tp.tx_id after bind(). In opposite to normal and extended addressing this socket does not register a CAN-ID for reception which would be needed for a 1-to-1 ISOTP connection with a segmented bi-directional data transfer. Sending SFs on this socket is therefore a TX-only 'broadcast' operation. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Thomas Wagner <thwa1@web.de> Link: https://lore.kernel.org/r/20201206144731.4609-1-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-12-09can: isotp: isotp_setsockopt(): block setsockopt on bound socketsOliver Hartkopp1-0/+3
The isotp socket can be widely configured in its behaviour regarding addressing types, fill-ups, receive pattern tests and link layer length. Usually all these settings need to be fixed before bind() and can not be changed afterwards. This patch adds a check to enforce the common usage pattern. Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol") Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Tested-by: Thomas Wagner <thwa1@web.de> Link: https://lore.kernel.org/r/20201203140604.25488-2-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/r/20201204133508.742120-3-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-2/+5
Trivial conflict in CAN, keep the net-next + the byteswap wrapper. Conflicts: drivers/net/can/usb/gs_usb.c Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-27can: af_can: can_rx_unregister(): remove WARN() statement from list ↵Oliver Hartkopp1-2/+5
operation sanity check To detect potential bugs in CAN protocol implementations (double removal of receiver entries) a WARN() statement has been used if no matching list item was found for removal. The fault injection issued by syzkaller was able to create a situation where the closing of a socket runs simultaneously to the notifier call chain for removing the CAN network device in use. This case is very unlikely in real life but it doesn't break anything. Therefore we just replace the WARN() statement with pr_warn() to preserve the notification for the CAN protocol development. Reported-by: syzbot+381d06e0c8eaacb8706f@syzkaller.appspotmail.com Reported-by: syzbot+d0ddd88c9a7432f041e6@syzkaller.appspotmail.com Reported-by: syzbot+76d62d3b8162883c7d11@syzkaller.appspotmail.com Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/r/20201126192140.14350-1-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-20can: gw: support modification of Classical CAN DLCsOliver Hartkopp1-8/+70
Add support for data length code modifications for Classical CAN. The netlink configuration interface always allowed to pass any value that fits into a byte, therefore only the modification process had to be extended to handle the raw DLC represenation of Classical CAN frames. When a DLC value from 0 .. F is provided for Classical CAN frame modifications the 'len' value is modified as-is with the exception that potentially existing 9 .. F DLC values in the len8_dlc element are moved to the 'len' element for the modification operation by mod_retrieve_ccdlc(). After the modification the Classical CAN frame DLC information is brought back into the correct format by mod_store_ccdlc() which is filling 'len' and 'len8_dlc' accordingly. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/r/20201119084921.2621-1-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>