summaryrefslogtreecommitdiff
path: root/net/ceph
AgeCommit message (Collapse)AuthorFilesLines
2023-02-22Merge tag 'net-next-6.3' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ...
2023-02-03libceph: use bvec_set_page to initialize bvecsChristoph Hellwig2-22/+13
Use the bvec_set_page helper to initialize bvecs. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Link: https://lore.kernel.org/r/20230203150634.3199647-24-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-23net/sock: Introduce trace_sk_data_ready()Peilin Ye1-0/+4
As suggested by Cong, introduce a tracepoint for all ->sk_data_ready() callback implementations. For example: <...> iperf-609 [002] ..... 70.660425: sk_data_ready: family=2 protocol=6 func=sock_def_readable iperf-609 [002] ..... 70.660436: sk_data_ready: family=2 protocol=6 func=sock_def_readable <...> Suggested-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Peilin Ye <peilin.ye@bytedance.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-20Treewide: Stop corrupting socket's task_fragBenjamin Coddington1-0/+1
Since moving to memalloc_nofs_save/restore, SUNRPC has stopped setting the GFP_NOIO flag on sk_allocation which the networking system uses to decide when it is safe to use current->task_frag. The results of this are unexpected corruption in task_frag when SUNRPC is involved in memory reclaim. The corruption can be seen in crashes, but the root cause is often difficult to ascertain as a crashing machine's stack trace will have no evidence of being near NFS or SUNRPC code. I believe this problem to be much more pervasive than reports to the community may indicate. Fix this by having kernel users of sockets that may corrupt task_frag due to reclaim set sk_use_task_frag = false. Preemptively correcting this situation for users that still set sk_allocation allows them to convert to memalloc_nofs_save/restore without the same unexpected corruptions that are sure to follow, unlikely to show up in testing, and difficult to bisect. CC: Philipp Reisner <philipp.reisner@linbit.com> CC: Lars Ellenberg <lars.ellenberg@linbit.com> CC: "Christoph Böhmwalder" <christoph.boehmwalder@linbit.com> CC: Jens Axboe <axboe@kernel.dk> CC: Josef Bacik <josef@toxicpanda.com> CC: Keith Busch <kbusch@kernel.org> CC: Christoph Hellwig <hch@lst.de> CC: Sagi Grimberg <sagi@grimberg.me> CC: Lee Duncan <lduncan@suse.com> CC: Chris Leech <cleech@redhat.com> CC: Mike Christie <michael.christie@oracle.com> CC: "James E.J. Bottomley" <jejb@linux.ibm.com> CC: "Martin K. Petersen" <martin.petersen@oracle.com> CC: Valentina Manea <valentina.manea.m@gmail.com> CC: Shuah Khan <shuah@kernel.org> CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org> CC: David Howells <dhowells@redhat.com> CC: Marc Dionne <marc.dionne@auristor.com> CC: Steve French <sfrench@samba.org> CC: Christine Caulfield <ccaulfie@redhat.com> CC: David Teigland <teigland@redhat.com> CC: Mark Fasheh <mark@fasheh.com> CC: Joel Becker <jlbec@evilplan.org> CC: Joseph Qi <joseph.qi@linux.alibaba.com> CC: Eric Van Hensbergen <ericvh@gmail.com> CC: Latchesar Ionkov <lucho@ionkov.net> CC: Dominique Martinet <asmadeus@codewreck.org> CC: Ilya Dryomov <idryomov@gmail.com> CC: Xiubo Li <xiubli@redhat.com> CC: Chuck Lever <chuck.lever@oracle.com> CC: Jeff Layton <jlayton@kernel.org> CC: Trond Myklebust <trond.myklebust@hammerspace.com> CC: Anna Schumaker <anna@kernel.org> CC: Steffen Klassert <steffen.klassert@secunet.com> CC: Herbert Xu <herbert@gondor.apana.org.au> Suggested-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-13Merge tag 'pull-iov_iter' of ↵Linus Torvalds2-9/+9
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull iov_iter updates from Al Viro: "iov_iter work; most of that is about getting rid of direction misannotations and (hopefully) preventing more of the same for the future" * tag 'pull-iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: use less confusing names for iov_iter direction initializers iov_iter: saner checks for attempt to copy to/from iterator [xen] fix "direction" argument of iov_iter_kvec() [vhost] fix 'direction' argument of iov_iter_{init,bvec}() [target] fix iov_iter_bvec() "direction" argument [s390] memcpy_real(): WRITE is "data source", not destination... [s390] zcore: WRITE is "data source", not destination... [infiniband] READ is "data destination", not source... [fsi] WRITE is "data source", not destination... [s390] copy_oldmem_kernel() - WRITE is "data source", not destination csum_and_copy_to_iter(): handle ITER_DISCARD get rid of unlikely() on page_copy_sane() calls
2022-11-25use less confusing names for iov_iter direction initializersAl Viro2-9/+9
READ/WRITE proved to be actively confusing - the meanings are "data destination, as used with read(2)" and "data source, as used with write(2)", but people keep interpreting those as "we read data from it" and "we write data to it", i.e. exactly the wrong way. Call them ITER_DEST and ITER_SOURCE - at least that is harder to misinterpret... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2022-11-18treewide: use get_random_u32_below() instead of deprecated functionJason A. Donenfeld2-2/+2
This is a simple mechanical transformation done by: @@ expression E; @@ - prandom_u32_max + get_random_u32_below (E) Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs Reviewed-by: SeongJae Park <sj@kernel.org> # for damon Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> # for infiniband Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> # for arm Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-17Merge tag 'random-6.1-rc1-for-linus' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random Pull more random number generator updates from Jason Donenfeld: "This time with some large scale treewide cleanups. The intent of this pull is to clean up the way callers fetch random integers. The current rules for doing this right are: - If you want a secure or an insecure random u64, use get_random_u64() - If you want a secure or an insecure random u32, use get_random_u32() The old function prandom_u32() has been deprecated for a while now and is just a wrapper around get_random_u32(). Same for get_random_int(). - If you want a secure or an insecure random u16, use get_random_u16() - If you want a secure or an insecure random u8, use get_random_u8() - If you want secure or insecure random bytes, use get_random_bytes(). The old function prandom_bytes() has been deprecated for a while now and has long been a wrapper around get_random_bytes() - If you want a non-uniform random u32, u16, or u8 bounded by a certain open interval maximum, use prandom_u32_max() I say "non-uniform", because it doesn't do any rejection sampling or divisions. Hence, it stays within the prandom_*() namespace, not the get_random_*() namespace. I'm currently investigating a "uniform" function for 6.2. We'll see what comes of that. By applying these rules uniformly, we get several benefits: - By using prandom_u32_max() with an upper-bound that the compiler can prove at compile-time is ≤65536 or ≤256, internally get_random_u16() or get_random_u8() is used, which wastes fewer batched random bytes, and hence has higher throughput. - By using prandom_u32_max() instead of %, when the upper-bound is not a constant, division is still avoided, because prandom_u32_max() uses a faster multiplication-based trick instead. - By using get_random_u16() or get_random_u8() in cases where the return value is intended to indeed be a u16 or a u8, we waste fewer batched random bytes, and hence have higher throughput. This series was originally done by hand while I was on an airplane without Internet. Later, Kees and I worked on retroactively figuring out what could be done with Coccinelle and what had to be done manually, and then we split things up based on that. So while this touches a lot of files, the actual amount of code that's hand fiddled is comfortably small" * tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: prandom: remove unused functions treewide: use get_random_bytes() when possible treewide: use get_random_u32() when possible treewide: use get_random_{u8,u16}() when possible, part 2 treewide: use get_random_{u8,u16}() when possible, part 1 treewide: use prandom_u32_max() when possible, part 2 treewide: use prandom_u32_max() when possible, part 1
2022-10-12treewide: use prandom_u32_max() when possible, part 1Jason A. Donenfeld2-2/+2
Rather than incurring a division or requesting too many random bytes for the given range, use the prandom_u32_max() function, which only takes the minimum required bytes from the RNG and avoids divisions. This was done mechanically with this coccinelle script: @basic@ expression E; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u64; @@ ( - ((T)get_random_u32() % (E)) + prandom_u32_max(E) | - ((T)get_random_u32() & ((E) - 1)) + prandom_u32_max(E * XXX_MAKE_SURE_E_IS_POW2) | - ((u64)(E) * get_random_u32() >> 32) + prandom_u32_max(E) | - ((T)get_random_u32() & ~PAGE_MASK) + prandom_u32_max(PAGE_SIZE) ) @multi_line@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; identifier RAND; expression E; @@ - RAND = get_random_u32(); ... when != RAND - RAND %= (E); + RAND = prandom_u32_max(E); // Find a potential literal @literal_mask@ expression LITERAL; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; position p; @@ ((T)get_random_u32()@p & (LITERAL)) // Add one to the literal. @script:python add_one@ literal << literal_mask.LITERAL; RESULT; @@ value = None if literal.startswith('0x'): value = int(literal, 16) elif literal[0] in '123456789': value = int(literal, 10) if value is None: print("I don't know how to handle %s" % (literal)) cocci.include_match(False) elif value == 2**32 - 1 or value == 2**31 - 1 or value == 2**24 - 1 or value == 2**16 - 1 or value == 2**8 - 1: print("Skipping 0x%x for cleanup elsewhere" % (value)) cocci.include_match(False) elif value & (value + 1) != 0: print("Skipping 0x%x because it's not a power of two minus one" % (value)) cocci.include_match(False) elif literal.startswith('0x'): coccinelle.RESULT = cocci.make_expr("0x%x" % (value + 1)) else: coccinelle.RESULT = cocci.make_expr("%d" % (value + 1)) // Replace the literal mask with the calculated result. @plus_one@ expression literal_mask.LITERAL; position literal_mask.p; expression add_one.RESULT; identifier FUNC; @@ - (FUNC()@p & (LITERAL)) + prandom_u32_max(RESULT) @collapse_ret@ type T; identifier VAR; expression E; @@ { - T VAR; - VAR = (E); - return VAR; + return E; } @drop_var@ type T; identifier VAR; @@ { - T VAR; ... when != VAR } Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Reviewed-by: KP Singh <kpsingh@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> # for ext4 and sbitmap Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> # for drbd Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390 Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-04libceph: drop last_piece flag from ceph_msg_data_cursorJeff Layton3-39/+9
ceph_msg_data_next is always passed a NULL pointer for this field. Some of the "next" operations look at it in order to determine the length, but we can just take the min of the data on the page or cursor->resid. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2022-08-03libceph: clean up ceph_osdc_start_request prototypeJeff Layton1-9/+6
This function always returns 0, and ignores the nofail boolean. Drop the nofail argument, make the function void return and fix up the callers. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2022-08-03libceph: fix ceph_pagelist_reserve() comment typoJason Wang1-1/+1
The double `without' is duplicated in the comment, remove one. Signed-off-by: Jason Wang <wangborong@cdjrlc.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2022-08-03libceph: print fsid and epoch with osd idDaichi Mukai1-7/+23
Print fsid and epoch in libceph log messages to distinct from which each message come. [ idryomov: don't bother with gid for now, print epoch instead ] Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com> Signed-off-by: Daichi Mukai <daichi-mukai@cybozu.co.jp> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2022-08-03libceph: check pointer before assigned to "c->rules[]"Li Qiong1-1/+1
It should be better to check pointer firstly, then assign it to c->rules[]. Refine code a little bit. Signed-off-by: Li Qiong <liqiong@nfschina.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2022-05-25libceph: use swap() macro instead of taking tmp variableGuo Zhengkui1-4/+1
Fix the following coccicheck warning: net/ceph/crush/mapper.c:1077:8-9: WARNING opportunity for swap() by using swap() for the swapping of variable values and drop the tmp variable that is not needed any more. Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2022-05-18libceph: fix misleading ceph_osdc_cancel_request() commentIlya Dryomov1-2/+7
cancel_request() never guaranteed that after its return the OSD client would be completely done with the OSD request. The callback (if specified) can still be invoked and a ref can still be held. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Xiubo Li <xiubli@redhat.com>
2022-05-18libceph: fix potential use-after-free on linger ping and resendsIlya Dryomov1-183/+119
request_reinit() is not only ugly as the comment rightfully suggests, but also unsafe. Even though it is called with osdc->lock held for write in all cases, resetting the OSD request refcount can still race with handle_reply() and result in use-after-free. Taking linger ping as an example: handle_timeout thread handle_reply thread down_read(&osdc->lock) req = lookup_request(...) ... finish_request(req) # unregisters up_read(&osdc->lock) __complete_request(req) linger_ping_cb(req) # req->r_kref == 2 because handle_reply still holds its ref down_write(&osdc->lock) send_linger_ping(lreq) req = lreq->ping_req # same req # cancel_linger_request is NOT # called - handle_reply already # unregistered request_reinit(req) WARN_ON(req->r_kref != 1) # fires request_init(req) kref_init(req->r_kref) # req->r_kref == 1 after kref_init ceph_osdc_put_request(req) kref_put(req->r_kref) # req->r_kref == 0 after kref_put, req is freed <further req initialization/use> !!! This happens because send_linger_ping() always (re)uses the same OSD request for watch ping requests, relying on cancel_linger_request() to unregister it from the OSD client and rip its messages out from the messenger. send_linger() does the same for watch/notify registration and watch reconnect requests. Unfortunately cancel_request() doesn't guarantee that after it returns the OSD client would be completely done with the OSD request -- a ref could still be held and the callback (if specified) could still be invoked too. The original motivation for request_reinit() was inability to deal with allocation failures in send_linger() and send_linger_ping(). Switching to using osdc->req_mempool (currently only used by CephFS) respects that and allows us to get rid of request_reinit(). Cc: stable@vger.kernel.org Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Xiubo Li <xiubli@redhat.com> Acked-by: Jeff Layton <jlayton@kernel.org>
2022-04-25libceph: disambiguate cluster/pool full log messageIlya Dryomov1-1/+5
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2022-03-01libceph: drop else branches in prepare_read_data{,_cont}Jeff Layton1-6/+2
Just call set_in_bvec in the non-conditional part. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2022-02-02libceph: optionally use bounce buffer on recv path in crc modeIlya Dryomov4-20/+103
Both msgr1 and msgr2 in crc mode are zero copy in the sense that message data is read from the socket directly into the destination buffer. We assume that the destination buffer is stable (i.e. remains unchanged while it is being read to) though. Otherwise, CRC errors ensue: libceph: read_partial_message 0000000048edf8ad data crc 1063286393 != exp. 228122706 libceph: osd1 (1)192.168.122.1:6843 bad crc/signature libceph: bad data crc, calculated 57958023, expected 1805382778 libceph: osd2 (2)192.168.122.1:6876 integrity error, bad crc Introduce rxbounce option to enable use of a bounce buffer when receiving message data. In particular this is needed if a mapped image is a Windows VM disk, passed to QEMU. Windows has a system-wide "dummy" page that may be mapped into the destination buffer (potentially more than once into the same buffer) by the Windows Memory Manager in an effort to generate a single large I/O [1][2]. QEMU makes a point of preserving overlap relationships when cloning I/O vectors, so krbd gets exposed to this behaviour. [1] "What Is Really in That MDL?" https://docs.microsoft.com/en-us/previous-versions/windows/hardware/design/dn614012(v=vs.85) [2] https://blogs.msmvps.com/kernelmustard/2005/05/04/dummy-pages/ URL: https://bugzilla.redhat.com/show_bug.cgi?id=1973317 Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jeff Layton <jlayton@kernel.org>
2022-02-02libceph: make recv path in secure mode work the same as send pathIlya Dryomov1-62/+154
The recv path of secure mode is intertwined with that of crc mode. While it's slightly more efficient that way (the ciphertext is read into the destination buffer and decrypted in place, thus avoiding two potentially heavy memory allocations for the bounce buffer and the corresponding sg array), it isn't really amenable to changes. Sacrifice that edge and align with the send path which always uses a full-sized bounce buffer (currently there is no other way -- if the kernel crypto API ever grows support for streaming (piecewise) en/decryption for GCM [1], we would be able to easily take advantage of that on both sides). [1] https://lore.kernel.org/all/20141225202830.GA18794@gondor.apana.org.au/ Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jeff Layton <jlayton@kernel.org>
2022-01-20Merge tag 'ceph-for-5.17-rc1' of git://github.com/ceph/ceph-clientLinus Torvalds2-16/+17
Pull ceph updates from Ilya Dryomov: "The highlight is the new mount "device" string syntax implemented by Venky Shankar. It solves some long-standing issues with using different auth entities and/or mounting different CephFS filesystems from the same cluster, remounting and also misleading /proc/mounts contents. The existing syntax of course remains to be maintained. On top of that, there is a couple of fixes for edge cases in quota and a new mount option for turning on unbuffered I/O mode globally instead of on a per-file basis with ioctl(CEPH_IOC_SYNCIO)" * tag 'ceph-for-5.17-rc1' of git://github.com/ceph/ceph-client: ceph: move CEPH_SUPER_MAGIC definition to magic.h ceph: remove redundant Lsx caps check ceph: add new "nopagecache" option ceph: don't check for quotas on MDS stray dirs ceph: drop send metrics debug message rbd: make const pointer spaces a static const array ceph: Fix incorrect statfs report for small quota ceph: mount syntax module parameter doc: document new CephFS mount device syntax ceph: record updated mon_addr on remount ceph: new device mount syntax libceph: rename parse_fsid() to ceph_parse_fsid() and export libceph: generalize addr/ip parsing based on delimiter
2022-01-15mm: allow !GFP_KERNEL allocations for kvmallocMichal Hocko6-38/+11
Support for GFP_NO{FS,IO} and __GFP_NOFAIL has been implemented by previous patches so we can allow the support for kvmalloc. This will allow some external users to simplify or completely remove their helpers. GFP_NOWAIT semantic hasn't been supported so far but it hasn't been explicitly documented so let's add a note about that. ceph_kvmalloc is the first helper to be dropped and changed to kvmalloc. Link: https://lkml.kernel.org/r/20211122153233.9924-5-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Chinner <david@fromorbit.com> Cc: Ilya Dryomov <idryomov@gmail.com> Cc: Jeff Layton <jlayton@kernel.org> Cc: Neil Brown <neilb@suse.de> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-13libceph: rename parse_fsid() to ceph_parse_fsid() and exportVenky Shankar1-4/+5
... as it is too generic. also, use __func__ when logging rather than hardcoding the function name. Signed-off-by: Venky Shankar <vshankar@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2022-01-13libceph: generalize addr/ip parsing based on delimiterVenky Shankar2-12/+12
... and remove hardcoded function name in ceph_parse_ips(). [ idryomov: delim parameter, drop CEPH_ADDR_PARSE_DEFAULT_DELIM ] Signed-off-by: Venky Shankar <vshankar@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-11-08libceph, ceph: move ceph_osdc_copy_from() into cephfs codeLuís Henriques1-51/+9
This patch moves ceph_osdc_copy_from() function out of libceph code into cephfs. There are no other users for this function, and there is the need (in another patch) to access internal ceph_osd_request struct members. Signed-off-by: Luís Henriques <lhenriques@suse.de> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-11-08libceph: drop ->monmap and err initializationJean Sacren1-2/+1
Call to build_initial_monmap() is one stone two birds. Explicitly it initializes err variable. Implicitly it initializes ->monmap via call to kzalloc(). We should only declare err and ->monmap is taken care of by ceph_monc_init() prototype. Signed-off-by: Jean Sacren <sakiwit@gmail.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-06-29libceph: fix doc warnings in cls_lock_client.cBaokun Li1-3/+9
Add description to fix the following W=1 kernel build warnings: net/ceph/cls_lock_client.c:28: warning: Function parameter or member 'osdc' not described in 'ceph_cls_lock' net/ceph/cls_lock_client.c:28: warning: Function parameter or member 'oid' not described in 'ceph_cls_lock' net/ceph/cls_lock_client.c:28: warning: Function parameter or member 'oloc' not described in 'ceph_cls_lock' [ idryomov: tweak osdc description ] Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-06-29libceph: remove unnecessary ret variable in ceph_auth_init()zuoqilin1-6/+1
There is no necessary to define variable assignment, just return directly to simplify the steps. Signed-off-by: zuoqilin <zuoqilin@yulong.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-06-29libceph: fix some spelling mistakesZheng Yongjun3-4/+4
Fix some spelling mistakes in comments: - enconding ==> encoding - ambigous ==> ambiguous - orignal ==> original - encyption ==> encryption Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-06-29libceph: kill ceph_none_authorizer::reply_bufIlya Dryomov2-3/+2
We never receive authorizer replies with cephx disabled, so it is bogus. Also, it still uses the old zero-length array style. Reported-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-06-24libceph: set global_id as soon as we get an auth ticketIlya Dryomov3-14/+13
Commit 61ca49a9105f ("libceph: don't set global_id until we get an auth ticket") delayed the setting of global_id too much. It is set only after all tickets are received, but in pre-nautilus clusters an auth ticket and the service tickets are obtained in separate steps (for a total of three MAuth replies). When the service tickets are requested, global_id is used to build an authorizer; if global_id is still 0 we never get them and fail to establish the session. Moving the setting of global_id into protocol implementations. This way global_id can be set exactly when an auth ticket is received, not sooner nor later. Fixes: 61ca49a9105f ("libceph: don't set global_id until we get an auth ticket") Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jeff Layton <jlayton@kernel.org>
2021-06-24libceph: don't pass result into ac->ops->handle_reply()Ilya Dryomov3-11/+14
There is no result to pass in msgr2 case because authentication failures are reported through auth_bad_method frame and in MAuth case an error is returned immediately. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jeff Layton <jlayton@kernel.org>
2021-05-06Merge tag 'ceph-for-5.13-rc1' of git://github.com/ceph/ceph-clientLinus Torvalds3-20/+38
Pull ceph updates from Ilya Dryomov: "Notable items here are - a series to take advantage of David Howells' netfs helper library from Jeff - three new filesystem client metrics from Xiubo - ceph.dir.rsnaps vxattr from Yanhu - two auth-related fixes from myself, marked for stable. Interspersed is a smattering of assorted fixes and cleanups across the filesystem" * tag 'ceph-for-5.13-rc1' of git://github.com/ceph/ceph-client: (24 commits) libceph: allow addrvecs with a single NONE/blank address libceph: don't set global_id until we get an auth ticket libceph: bump CephXAuthenticate encoding version ceph: don't allow access to MDS-private inodes ceph: fix up some bare fetches of i_size ceph: convert some PAGE_SIZE invocations to thp_size() ceph: support getting ceph.dir.rsnaps vxattr ceph: drop pinned_page parameter from ceph_get_caps ceph: fix inode leak on getattr error in __fh_to_dentry ceph: only check pool permissions for regular files ceph: send opened files/pinned caps/opened inodes metrics to MDS daemon ceph: avoid counting the same request twice or more ceph: rename the metric helpers ceph: fix kerneldoc copypasta over ceph_start_io_direct ceph: use attach/detach_page_private for tracking snap context ceph: don't use d_add in ceph_handle_snapdir ceph: don't clobber i_snap_caps on non-I_NEW inode ceph: fix fall-through warnings for Clang ceph: convert ceph_readpages to ceph_readahead ceph: convert ceph_write_begin to netfs_write_begin ...
2021-05-04libceph: allow addrvecs with a single NONE/blank addressIlya Dryomov1-6/+14
Normally, an unused OSD id/slot is represented by an empty addrvec. However, it also appears to be possible to generate an osdmap where an unused OSD id/slot has an addrvec with a single blank address of type NONE. Allow such addrvecs and make the end result be exactly the same as for the empty addrvec case -- leave addr intact. Cc: stable@vger.kernel.org # 5.11+ Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jeff Layton <jlayton@kernel.org>
2021-04-28libceph: don't set global_id until we get an auth ticketIlya Dryomov1-13/+23
With the introduction of enforcing mode, setting global_id as soon as we get it in the first MAuth reply will result in EACCES if the connection is reset before we get the second MAuth reply containing an auth ticket -- because on retry we would attempt to reclaim that global_id with no auth ticket at hand. Neither ceph_auth_client nor ceph_mon_client depend on global_id being set ealy, so just delay the setting until we get and process the second MAuth reply. While at it, complain if the monitor sends a zero global_id or changes our global_id as the session is likely to fail after that. Cc: stable@vger.kernel.org # needs backporting for < 5.11 Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com>
2021-04-28libceph: bump CephXAuthenticate encoding versionIlya Dryomov1-1/+1
A dummy v3 encoding (exactly the same as v2) was introduced so that the monitors can distinguish broken clients that may not include their auth ticket in CEPHX_GET_AUTH_SESSION_KEY request on reconnects, thus failing to prove previous possession of their global_id (one part of CVE-2021-20288). The kernel client has always included its auth ticket, so it is compatible with enforcing mode as is. However we want to bump the encoding version to avoid having to authenticate twice on the initial connect -- all legacy (CephXAuthenticate < v3) are now forced do so in order to expose insecure global_id reclaim. Marking for stable since at least for 5.11 and 5.12 it is trivial (v2 -> v3). Cc: stable@vger.kernel.org # 5.11+ URL: https://tracker.ceph.com/issues/50452 Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com>
2021-03-26net: ceph: Fix a typo in osdmap.cLu Wei1-1/+1
Modify "inital" to "initial" in net/ceph/osdmap.c. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Lu Wei <luwei32@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16libceph: remove osdtimeout option entirelyIlya Dryomov1-6/+0
Commit 83aff95eb9d6 ("libceph: remove 'osdtimeout' option") deprecated osdtimeout over 8 years ago, but it is still recognized. Let's remove it entirely. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jeff Layton <jlayton@kernel.org>
2021-02-16libceph: deprecate [no]cephx_require_signatures optionsIlya Dryomov1-6/+5
These options were introduced in 3.19 with support for message signing and are rather useless, as explained in commit a51983e4dd2d ("libceph: add nocephx_sign_messages option"). Deprecate them. In case there is someone out there with a cluster that lacks support for MSG_AUTH feature (very unlikely but has to be considered since we haven't formally raised the bar from argonaut to bobtail yet), make nocephx_sign_messages also waive MSG_AUTH requirement. This is probably how it should have been done in the first place -- if we aren't going to sign, requiring the signing feature makes no sense. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jeff Layton <jlayton@kernel.org>
2021-01-21libceph: fix "Boolean result is used in bitwise operation" warningIlya Dryomov1-1/+1
This line dates back to 2013, but cppcheck complained because commit 2f713615ddd9 ("libceph: move msgr1 protocol implementation to its own file") moved it. Add parenthesis to silence the warning. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-01-04libceph, ceph: disambiguate ceph_connection_operations handlersIlya Dryomov2-27/+27
Since a few years, kernel addresses are no longer included in oops dumps, at least on x86. All we get is a symbol name with offset and size. This is a problem for ceph_connection_operations handlers, especially con->ops->dispatch(). All three handlers have the same name and there is little context to disambiguate between e.g. monitor and OSD clients because almost everything is inlined. gdb sneakily stops at the first matching symbol, so one has to resort to nm and addr2line. Some of these are already prefixed with mon_, osd_ or mds_. Let's do the same for all others. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Acked-by: Jeff Layton <jlayton@kernel.org>
2021-01-04libceph: zero out session key and connection secretIlya Dryomov3-43/+62
Try and avoid leaving bits and pieces of session key and connection secret (gets split into GCM key and a pair of GCM IVs) around. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jeff Layton <jlayton@kernel.org>
2020-12-28libceph: align session_key and con_secret to 16 bytesIlya Dryomov1-2/+10
crypto_shash_setkey() and crypto_aead_setkey() will do a (small) GFP_ATOMIC allocation to align the key if it isn't suitably aligned. It's not a big deal, but at the same time easy to avoid. The actual alignment requirement is dynamic, queryable with crypto_shash_alignmask() and crypto_aead_alignmask(), but shouldn't be stricter than 16 bytes for our algorithms. Fixes: cd1a677cad99 ("libceph, ceph: implement msgr2.1 protocol (crc and secure modes)") Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-28libceph: fix auth_signature buffer allocation in secure modeIlya Dryomov1-1/+2
auth_signature frame is 68 bytes in plain mode and 96 bytes in secure mode but we are requesting 68 bytes in both modes. By luck, this doesn't actually result in any invalid memory accesses because the allocation is satisfied out of kmalloc-96 slab and so exactly 96 bytes are allocated, but KASAN rightfully complains. Fixes: cd1a677cad99 ("libceph, ceph: implement msgr2.1 protocol (crc and secure modes)") Reported-by: Luis Henriques <lhenriques@suse.de> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-17Merge tag 'ceph-for-5.11-rc1' of git://github.com/ceph/ceph-clientLinus Torvalds16-1914/+6384
Pull ceph updates from Ilya Dryomov: "The big ticket item here is support for msgr2 on-wire protocol, which adds the option of full in-transit encryption using AES-GCM algorithm (myself). On top of that we have a series to avoid intermittent errors during recovery with recover_session=clean and some MDS request encoding work from Jeff, a cap handling fix and assorted observability improvements from Luis and Xiubo and a good number of cleanups. Luis also ran into a corner case with quotas which sadly means that we are back to denying cross-quota-realm renames" * tag 'ceph-for-5.11-rc1' of git://github.com/ceph/ceph-client: (59 commits) libceph: drop ceph_auth_{create,update}_authorizer() libceph, ceph: make use of __ceph_auth_get_authorizer() in msgr1 libceph, ceph: implement msgr2.1 protocol (crc and secure modes) libceph: introduce connection modes and ms_mode option libceph, rbd: ignore addr->type while comparing in some cases libceph, ceph: get and handle cluster maps with addrvecs libceph: factor out finish_auth() libceph: drop ac->ops->name field libceph: amend cephx init_protocol() and build_request() libceph, ceph: incorporate nautilus cephx changes libceph: safer en/decoding of cephx requests and replies libceph: more insight into ticket expiry and invalidation libceph: move msgr1 protocol specific fields to its own struct libceph: move msgr1 protocol implementation to its own file libceph: separate msgr1 protocol implementation libceph: export remaining protocol independent infrastructure libceph: export zero_page libceph: rename and export con->flags bits libceph: rename and export con->state states libceph: make con->state an int ...
2020-12-15libceph: drop ceph_auth_{create,update}_authorizer()Ilya Dryomov1-28/+0
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-15libceph, ceph: make use of __ceph_auth_get_authorizer() in msgr1Ilya Dryomov1-16/+5
This shouldn't cause any functional changes. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-15libceph, ceph: implement msgr2.1 protocol (crc and secure modes)Ilya Dryomov8-24/+4046
Implement msgr2.1 wire protocol, available since nautilus 14.2.11 and octopus 15.2.5. msgr2.0 wire protocol is not implemented -- it has several security, integrity and robustness issues and therefore considered deprecated. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-15libceph: introduce connection modes and ms_mode optionIlya Dryomov4-6/+87
msgr2 supports two connection modes: crc (plain) and secure (on-wire encryption). Connection mode is picked by server based on input from client. Introduce ms_mode option: ms_mode=legacy - msgr1 (default) ms_mode=crc - crc mode, if denied fail ms_mode=secure - secure mode, if denied fail ms_mode=prefer-crc - crc mode, if denied agree to secure mode ms_mode=prefer-secure - secure mode, if denied agree to crc mode ms_mode affects all connections, we don't separate connections to mons like it's done in userspace with ms_client_mode vs ms_mon_client_mode. For now the default is legacy, to be flipped to prefer-crc after some time. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>