summaryrefslogtreecommitdiff
path: root/net/ethtool/cabletest.c
AgeCommit message (Collapse)AuthorFilesLines
2022-07-26net: delete extra space and tab in blank lineWilliam Dean1-1/+1
delete extra space and tab in blank line, there is no functional change. Reported-by: Hacash Robot <hacashRobot@santino.com> Signed-off-by: William Dean <williamsukatube@gmail.com> Link: https://lore.kernel.org/r/20220723073222.2961602-1-williamsukatube@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-15ethtool: use ethnl_parse_header_dev_put()Eric Dumazet1-2/+2
It seems I missed that most ethnl_parse_header_dev_get() callers declare an on-stack struct ethnl_req_info, and that they simply call dev_put(req_info.dev) when about to return. Add ethnl_parse_header_dev_put() helper to properly untrack reference taken by ethnl_parse_header_dev_get(). Fixes: e4b8954074f6 ("netlink: add net device refcount tracker to struct ethnl_req_info") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-06ethtool: link up ethnl_header_policy as a nested policyJakub Kicinski1-2/+4
To get the most out of parsing by the core, and to allow dumping full policies we need to specify which policy applies to nested attrs. For headers it's ethnl_header_policy. $ sed -i 's@\(ETHTOOL_A_.*HEADER\].*=\) { .type = NLA_NESTED },@\1\n\t\tNLA_POLICY_NESTED(ethnl_header_policy),@' net/ethtool/* Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-06ethtool: trim policy tablesJakub Kicinski1-11/+8
Since ethtool uses strict attribute validation there's no need to initialize all attributes in policy tables. 0 is NLA_UNSPEC which is going to be rejected. Remove the NLA_REJECTs. Similarly attributes above maxattrs are rejected, so there's no need to always size the policy tables to ETHTOOL_A_..._MAX. v2: - new patch Suggested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-06ethtool: wire up set policies to opsJakub Kicinski1-18/+6
Similarly to get commands wire up the policies of set commands to get parsing by the core and policy dumps. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-08net: ethtool: Remove PHYLIB direct dependencyFlorian Fainelli1-2/+16
Now that we have introduced ethtool_phy_ops and the PHY library dynamically registers its operations with that function pointer, we can remove the direct PHYLIB dependency in favor of using dynamic operations. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-24net: ethtool: Handle missing cable test TDR parametersAndrew Lunn1-8/+9
A last minute change put the TDR cable test parameters into a nest. The validation is not sufficient, resulting in an oops if the nest is missing. Set default values first, then update them if the nest is provided. Fixes: f2bc8ad31a7f ("net: ethtool: Allow PHY cable test TDR data to configured") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-30net: ethtool: cabletest: Make ethnl_act_cable_test_tdr_cfg staticAndrew Lunn1-3/+3
kbuild test robot is reporting: net/ethtool/cabletest.c:230:5: warning: no previous prototype for Mark the function as static. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27net: ethtool: Allow PHY cable test TDR data to configuredAndrew Lunn1-2/+102
Allow the user to configure where on the cable the TDR data should be retrieved, in terms of first and last sample, and the step between samples. Also add the ability to ask for TDR data for just one pair. If this configuration is not provided, it defaults to 1-150m at 1m intervals for all pairs. Signed-off-by: Andrew Lunn <andrew@lunn.ch> v3: Move the TDR configuration into a structure Add a range check on step Use NL_SET_ERR_MSG_ATTR() when appropriate Move TDR configuration into a nest Document attributes in the request Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27net: ethtool: Add helpers for cable test TDR dataAndrew Lunn1-1/+79
Add helpers for returning raw TDR helpers in netlink messages. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27net: ethtool: Add generic parts of cable test TDRAndrew Lunn1-6/+58
Add the generic parts of the code used to trigger a cable test and return raw TDR data. Any PHY driver which support this must implement the new driver op. Signed-off-by: Andrew Lunn <andrew@lunn.ch> v2 Update nxp-tja11xx for API change. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-10net: phy: Send notifier when starting the cable testAndrew Lunn1-0/+41
Given that it takes time to run a cable test, send a notify message at the start, as well as when it is completed. v3: EMSGSIZE when ethnl_bcastmsg_put() fails Print an error message on failure, since this is a void function. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-10net: ethtool: Add helpers for reporting test resultsAndrew Lunn1-1/+52
The PHY drivers can use these helpers for reporting the results. The results get translated into netlink attributes which are added to the pre-allocated skbuf. v3: Poison phydev->skb Return -EMSGSIZE when ethnl_bcastmsg_put() fails Return valid error code when nla_nest_start() fails Use u8 for results Actually put u32 length into message v4: s/ENOTSUPP/EOPNOTSUPP/g Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-10net: ethtool: Add infrastructure for reporting cable test resultsAndrew Lunn1-0/+55
Provide infrastructure for PHY drivers to report the cable test results. A netlink skb is associated to the phydev. Helpers will be added which can add results to this skb. Once the test has finished the results are sent to user space. When netlink ethtool is not part of the kernel configuration stubs are provided. It is also impossible to trigger a cable test, so the error code returned by the alloc function is of no consequence. v2: Include the status complete in the netlink notification message v4: Replace -EINVAL with -EMSGSIZE Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-10net: ethtool: netlink: Add support for triggering a cable testAndrew Lunn1-0/+54
Add new ethtool netlink calls to trigger the starting of a PHY cable test. Add Kconfig'ury to ETHTOOL_NETLINK so that PHYLIB is not a module when ETHTOOL_NETLINK is builtin, which would result in kernel linking errors. v2: Remove unwanted white space change Remove ethnl_cable_test_act_ops and use doit handler Rename cable_test_set_policy cable_test_act_policy Remove ETHTOOL_MSG_CABLE_TEST_ACT_REPLY v3: Remove ETHTOOL_MSG_CABLE_TEST_ACT_REPLY from documentation Remove unused cable_test_get_policy Add Reviewed-by tags v4: Remove unwanted blank line Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-07 11:51:50 +0300