summaryrefslogtreecommitdiff
path: root/net/hsr/hsr_slave.h
AgeCommit message (Collapse)AuthorFilesLines
2020-07-27net: prp: add packet handling supportMurali Karicheri1-0/+2
DAN-P (Dual Attached Nodes PRP) nodes are expected to receive traditional IP packets as well as PRP (Parallel Redundancy Protocol) tagged (trailer) packets. PRP trailer is 6 bytes of PRP protocol unit called RCT, Redundancy Control Trailer (RCT) similar to HSR tag. PRP network can have traditional devices such as bridges/switches or PC attached to it and should be able to communicate. Regular Ethernet devices treat the RCT as pads. This patch adds logic to format L2 frames from network stack to add a trailer (RCT) and send it as duplicates over the slave interfaces when the protocol is PRP as per IEC 62439-3. At the ingress, it strips the trailer, do duplicate detection and rejection and forward a stripped frame up the network stack. PRP device should accept frames from Singly Attached Nodes (SAN) and thus the driver mark the link where the frame came from in the node table. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-27hsr: enhance netlink socket interface to support PRPMurali Karicheri1-0/+2
Parallel Redundancy Protocol (PRP) is another redundancy protocol introduced by IEC 63439 standard. It is similar to HSR in many aspects:- - Use a pair of Ethernet interfaces to created the PRP device - Use a 6 byte redundancy protocol part (RCT, Redundancy Check Trailer) similar to HSR Tag. - Has Link Redundancy Entity (LRE) that works with RCT to implement redundancy. Key difference is that the protocol unit is a trailer instead of a prefix as in HSR. That makes it inter-operable with tradition network components such as bridges/switches which treat it as pad bytes, whereas HSR nodes requires some kind of translators (Called redbox) to talk to regular network devices. This features allows regular linux box to be converted to a DAN-P box. DAN-P stands for Dual Attached Node - PRP similar to DAN-H (Dual Attached Node - HSR). Add a comment at the header/source code to explicitly state that the driver files also handles PRP protocol as well. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-01hsr: use extack error message instead of netdev_infoTaehee Yoo1-1/+1
If HSR uses the extack instead of netdev_info(), users can get error messages immediately without any checking the kernel message. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-07net: hsr: convert to SPDX identifierMurali Karicheri1-6/+1
Use SPDX-License-Identifier instead of a verbose license text. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-08net/hsr: Better frame dispatchArvid Brodin1-11/+1
This patch removes the separate paths for frames coming from the outside, and frames sent from the HSR device, and instead makes all frames go through hsr_forward_skb() in hsr_forward.c. This greatly improves code readability and also opens up the possibility for future support of the HSR Interlink device that is the basis for HSR RedBoxes and HSR QuadBoxes, as well as VLAN compatibility. Other improvements: * A reduction in the number of times an skb is copied on machines without HAVE_EFFICIENT_UNALIGNED_ACCESS, which improves throughput somewhat. * Headers are now created using the standard eth_header(), and using the standard hard_header_len. * Each HSR slave now gets its own private skb, so slave-specific fields can be correctly set. Signed-off-by: Arvid Brodin <arvid.brodin@alten.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-08net/hsr: Use list_head (and rcu) instead of array for slave devices.Arvid Brodin1-2/+27
Signed-off-by: Arvid Brodin <arvid.brodin@alten.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-08net/hsr: Move slave init to hsr_slave.c.Arvid Brodin1-0/+3
Also try to prevent some possible slave dereference race conditions. This is finalized in the next patch, which abandons the slave array in favour of a list_head list and list RCU. Signed-off-by: Arvid Brodin <arvid.brodin@alten.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-08net/hsr: Switch from dev_add_pack() to netdev_rx_handler_register()Arvid Brodin1-0/+20
Also move the frame receive handler to hsr_slave.c. Signed-off-by: Arvid Brodin <arvid.brodin@alten.se> Signed-off-by: David S. Miller <davem@davemloft.net>