summaryrefslogtreecommitdiff
path: root/net/ipv4/xfrm4_mode_transport.c
AgeCommit message (Collapse)AuthorFilesLines
2019-04-08xfrm: make xfrm modes builtinFlorian Westphal1-36/+0
after previous changes, xfrm_mode contains no function pointers anymore and all modules defining such struct contain no code except an init/exit functions to register the xfrm_mode struct with the xfrm core. Just place the xfrm modes core and remove the modules, the run-time xfrm_mode register/unregister functionality is removed. Before: text data bss dec filename 7523 200 2364 10087 net/xfrm/xfrm_input.o 40003 628 440 41071 net/xfrm/xfrm_state.o 15730338 6937080 4046908 26714326 vmlinux 7389 200 2364 9953 net/xfrm/xfrm_input.o 40574 656 440 41670 net/xfrm/xfrm_state.o 15730084 6937068 4046908 26714060 vmlinux The xfrm*_mode_{transport,tunnel,beet} modules are gone. v2: replace CONFIG_INET6_XFRM_MODE_* IS_ENABLED guards with CONFIG_IPV6 ones rather than removing them. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-04-08xfrm: remove gso_segment indirection from xfrm_modeFlorian Westphal1-17/+0
These functions are small and we only have versions for tunnel and transport mode for ipv4 and ipv6 respectively. Just place the 'transport or tunnel' conditional in the protocol specific function instead of using an indirection. Before: 3226 12 0 3238 net/ipv4/esp4_offload.o 7004 492 0 7496 net/ipv4/ip_vti.o 3339 12 0 3351 net/ipv6/esp6_offload.o 11294 460 0 11754 net/ipv6/ip6_vti.o 1180 72 0 1252 net/ipv4/xfrm4_mode_beet.o 428 48 0 476 net/ipv4/xfrm4_mode_transport.o 1271 48 0 1319 net/ipv4/xfrm4_mode_tunnel.o 1083 60 0 1143 net/ipv6/xfrm6_mode_beet.o 172 48 0 220 net/ipv6/xfrm6_mode_ro.o 429 48 0 477 net/ipv6/xfrm6_mode_transport.o 1164 48 0 1212 net/ipv6/xfrm6_mode_tunnel.o 15730428 6937008 4046908 26714344 vmlinux After: 3461 12 0 3473 net/ipv4/esp4_offload.o 7000 492 0 7492 net/ipv4/ip_vti.o 3574 12 0 3586 net/ipv6/esp6_offload.o 11295 460 0 11755 net/ipv6/ip6_vti.o 1180 64 0 1244 net/ipv4/xfrm4_mode_beet.o 171 40 0 211 net/ipv4/xfrm4_mode_transport.o 1163 40 0 1203 net/ipv4/xfrm4_mode_tunnel.o 1083 52 0 1135 net/ipv6/xfrm6_mode_beet.o 172 40 0 212 net/ipv6/xfrm6_mode_ro.o 172 40 0 212 net/ipv6/xfrm6_mode_transport.o 1056 40 0 1096 net/ipv6/xfrm6_mode_tunnel.o 15730424 6937008 4046908 26714340 vmlinux Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-04-08xfrm: remove xmit indirection from xfrm_modeFlorian Westphal1-14/+0
There are only two versions (tunnel and transport). The ip/ipv6 versions are only differ in sizeof(iphdr) vs ipv6hdr. Place this in the core and use x->outer_mode->encap type to call the correct adjustment helper. Before: text data bss dec filename 15730311 6937008 4046908 26714227 vmlinux After: 15730428 6937008 4046908 26714344 vmlinux (about 117 byte increase) v2: use family from x->outer_mode, not inner Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-04-08xfrm: remove output indirection from xfrm_modeFlorian Westphal1-22/+0
Same is input indirection. Only exception: we need to export xfrm_outer_mode_output for pktgen. Increases size of vmlinux by about 163 byte: Before: text data bss dec filename 15730208 6936948 4046908 26714064 vmlinux After: 15730311 6937008 4046908 26714227 vmlinux xfrm_inner_extract_output has no more external callers, make it static. v2: add IS_ENABLED(IPV6) guard in xfrm6_prepare_output add two missing breaks in xfrm_outer_mode_output (Sabrina Dubroca) add WARN_ON_ONCE for 'call AF_INET6 related output function, but CONFIG_IPV6=n' case. make xfrm_inner_extract_output static Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-04-08xfrm: remove input indirection from xfrm_modeFlorian Westphal1-23/+0
No need for any indirection or abstraction here, both functions are pretty much the same and quite small, they also have no external dependencies. xfrm_prepare_input can then be made static. With allmodconfig build, size increase of vmlinux is 25 byte: Before: text data bss dec filename 15730207 6936924 4046908 26714039 vmlinux After: 15730208 6936948 4046908 26714064 vmlinux v2: Fix INET_XFRM_MODE_TRANSPORT name in is-enabled test (Sabrina Dubroca) change copied comment to refer to transport and network header, not skb->{h,nh}, which don't exist anymore. (Sabrina) make xfrm_prepare_input static (Eyal Birger) Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-04-08xfrm: place af number into xfrm_mode structFlorian Westphal1-5/+3
This will be useful to know if we're supposed to decode ipv4 or ipv6. While at it, make the unregister function return void, all module_exit functions did just BUG(); there is never a point in doing error checks if there is no way to handle such error. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-09-04xfrm: reset transport header back to network header after all input ↵Sowmini Varadhan1-3/+1
transforms ahave been applied A policy may have been set up with multiple transforms (e.g., ESP and ipcomp). In this situation, the ingress IPsec processing iterates in xfrm_input() and applies each transform in turn, processing the nexthdr to find any additional xfrm that may apply. This patch resets the transport header back to network header only after the last transformation so that subsequent xfrms can find the correct transport header. Fixes: 7785bba299a8 ("esp: Add a software GRO codepath") Suggested-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-04-14xfrm: Add encapsulation header offsets while SKB is not encryptedIlan Tayari1-0/+2
Both esp4 and esp6 used to assume that the SKB payload is encrypted and therefore the inner_network and inner_transport offsets are not relevant. When doing crypto offload in the NIC, this is no longer the case and the NIC driver needs these offsets so it can do TX TCP checksum offloading. This patch sets the inner_network and inner_transport members of the SKB, as well as encapsulation, to reflect the actual positions of these headers, and removes them only once encryption is done on the payload. Signed-off-by: Ilan Tayari <ilant@mellanox.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-04-14xfrm: Add mode handlers for IPsec on layer 2Steffen Klassert1-0/+32
This patch adds a gso_segment and xmit callback for the xfrm_mode and implement these functions for tunnel and transport mode. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-02-15esp: Add a software GRO codepathSteffen Klassert1-1/+3
This patch adds GRO ifrastructure and callbacks for ESP on ipv4 and ipv6. In case the GRO layer detects an ESP packet, the esp{4,6}_gro_receive() function does a xfrm state lookup and calls the xfrm input layer if it finds a matching state. The packet will be decapsulated and reinjected it into layer 2. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2007-10-11[IPSEC]: Use IPv6 calling convention as the convention for x->mode->outputHerbert Xu1-4/+3
The IPv6 calling convention for x->mode->output is more general and could help an eventual protocol-generic x->type->output implementation. This patch adopts it for IPv4 as well and modifies the IPv4 type output functions accordingly. It also rewrites the IPv6 mac/transport header calculation to be based off the network header where practical. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-11[IPSEC]: Set skb->data to payload in x->mode->outputHerbert Xu1-2/+2
This patch changes the calling convention so that on entry from x->mode->output and before entry into x->type->output skb->data will point to the payload instead of the IP header. This is essentially a redistribution of skb_push/skb_pull calls with the aim of minimising them on the common path of tunnel + ESP. It'll also let us use the same calling convention between IPv4 and IPv6 with the next patch. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26[SK_BUFF]: unions of just one member don't get anything done, kill themArnaldo Carvalho de Melo1-5/+3
Renaming skb->h to skb->transport_header, skb->nh to skb->network_header and skb->mac to skb->mac_header, to match the names of the associated helpers (skb[_[re]set]_{transport,network,mac}_header). Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26[SK_BUFF]: Introduce skb_transport_header(skb)Arnaldo Carvalho de Melo1-2/+3
For the places where we need a pointer to the transport header, it is still legal to touch skb->h.raw directly if just adding to, subtracting from or setting it to another layer header. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26[SK_BUFF]: Introduce skb_reset_transport_header(skb)Arnaldo Carvalho de Melo1-1/+1
For the common, open coded 'skb->h.raw = skb->data' operation, so that we can later turn skb->h.raw into a offset, reducing the size of struct sk_buff in 64bit land while possibly keeping it as a pointer on 32bit. This one touches just the most simple cases: skb->h.raw = skb->data; skb->h.raw = {skb_push|[__]skb_pull}() The next ones will handle the slightly more "complex" cases. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26[SK_BUFF]: Introduce ip_hdr(), remove skb->nh.iphArnaldo Carvalho de Melo1-7/+4
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26[SK_BUFF]: Introduce skb_network_header()Arnaldo Carvalho de Melo1-2/+2
For the places where we need a pointer to the network header, it is still legal to touch skb->nh.raw directly if just adding to, subtracting from or setting it to another layer header. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26[SK_BUFF] xfrm4: use skb_reset_network_headerArnaldo Carvalho de Melo1-2/+4
Setting it to skb->h.raw, which is valid, in the (to become) old pointer based world order and in the new world of offset based layer headers. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26[SK_BUFF]: Use skb_reset_network_header in skb_push casesArnaldo Carvalho de Melo1-1/+3
skb_push updates and returns skb->data, so we can just call skb_reset_network_header after the call to skb_push. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-23[IPSEC]: output mode to take an xfrm state as input paramJamal Hadi Salim1-3/+1
Expose IPSEC modes output path to take an xfrm state as input param. This makes it consistent with the input mode processing (which already takes the xfrm state as a param). Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-18[IPSEC] proto: Move transport mode input path into xfrm_mode_transportHerbert Xu1-0/+14
Now that we have xfrm_mode objects we can move the transport mode specific input decapsulation code into xfrm_mode_transport. This removes duplicate code as well as unnecessary header movement in case of tunnel mode SAs since we will discard the original IP header immediately. This also fixes a minor bug for transport-mode ESP where the IP payload length is set to the correct value minus the header length (with extension headers for IPv6). Of course the other neat thing is that we no longer have to allocate temporary buffers to hold the IP headers for ESP and IPComp. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-18[IPSEC] xfrm: Abstract out encapsulation modesHerbert Xu1-0/+69
This patch adds the structure xfrm_mode. It is meant to represent the operations carried out by transport/tunnel modes. By doing this we allow additional encapsulation modes to be added without clogging up the xfrm_input/xfrm_output paths. Candidate modes include 4-to-6 tunnel mode, 6-to-4 tunnel mode, and BEET modes. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>