Age | Commit message (Collapse) | Author | Files | Lines |
|
Notify the low level driver when there is change in the valid links.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230920211508.4fc85b0a51b0.I64238e0e892709a2bd4764b3bca93cdcf021e2fd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Connection to an AP that is running a CSA flow may end up with a
failure as the AP might change its channel during the connection
flow while we do not track the channel change yet.
Avoid that by rejecting a connection to such an AP.
Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230920211508.e5001a762a4a.I9745c695f3403b259ad000ce94110588a836c04a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In CSA, parse the (EHT) bandwidth indication element and
use it (in fact prefer it if present).
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230920211508.43ef01920556.If4f24a61cd634ab1e50eba43899b9e992bf25602@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We really cannot even get into this as we can't have
a BSS with a 5/10 MHz (scan) width, and therefore all
the code handling shifted rates cannot happen. Remove
it all, since it's broken anyway, at least with MLO.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Use the correct link ID and per-link puncturing data instead
of hardcoding link ID 0 and using deflink puncturing.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230827135854.0b6a211c8e75.I5724d32bb2dae440888efbc47334d8c115db9d50@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The code that sets up the assoc link will currently take the BSS
element data from the beacon only. This is correct for some of
the data, notably the timing and the "have_beacon", but all the
data about MBSSID and EHT really doesn't need to be taken from
there, and if the EHT puncturing is misconfigured on the AP but
we didn't receive a beacon yet, this causes us to connect but
immediately disconnect upon receiving the first beacon, rather
than connecting without EHT in the first place.
Change the code to take MBSSID and EHT data also from the probe
response, for a better picture of what the BSS capabilities are
and to avoid that EHT puncturing problem.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230827135854.3c7e52d49482.Iba6b672f6dc74b45bba26bc497e953e27da43ef9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
To ease debugging, mostly in cases that authentication fails.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230827135854.9c08605e2691.I0032e9d6e01325862189e4a20b02ddbe8f2f5e75@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This allows to finalize the CSA per link.
In case the switch didn't work, tear down the MLD connection.
Also pass the ieee80211_bss_conf to post_channel_switch to let the
driver know which link completed the switch.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230828130311.3d3eacc88436.Ic2d14e2285aa1646216a56806cfd4a8d0054437c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Since we're now protecting everything with the wiphy mutex
(and were really using it for almost everything before),
there's no longer any real reason to have a separate wdev
mutex. It may feel better, but really has no value.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We now hold the wiphy mutex everywhere that we use or
needed the iflist_mtx, so we don't need this mutex any
more in mac80211. However, drivers may also iterate,
and in some cases (e.g. mt76) do so from high-priority
contexts. Thus, keep the mutex around but remove its
usage in mac80211 apart from those driver-visible parts
that are still needed.
Most of this change was done automatically with spatch,
with the parts that are still needed as described above
reverted manually.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We now hold the wiphy mutex everywhere that we use or
needed the local->mtx, so we don't need this mutex any
more. Remove it.
Most of this change was done automatically with spatch.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We now hold the wiphy mutex everywhere that we use or
needed the chanctx_mtx, so we don't need this mutex any
more. Remove it.
Most of this change was done automatically with spatch.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We now hold the wiphy mutex everywhere that we use or
needed the sta_mtx, so we don't need this mutex any
more. Remove it.
Most of this change was done automatically with spatch.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
One more work that will now execute with the wiphy
locked, for future cleanups.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Again, to have the wiphy locked for it.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Along with everything else, move the dynamic PS work
to be a wiphy work, to simplify locking later.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Again this serves to simplify the locking in mac80211
in the future, since this is a relatively complex work.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Move the DFS CAC work over to hold the wiphy lock
there without worry about work cancellation.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The current SMPS status handling isn't per link, so we only
ever change the deflink, which is obviously wrong, it's not
even used for multi-link connections, but the request API
actually includes the link ID.
Use the new status_data changes to move the handling to the
right link, this also saves parsing the frame again on the
status report, instead we can now check only if it was an
SMPS frame.
Of course, move the worker to be a wiphy work so that we're
able to cancel it safely for the link.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When receiving a multi-link association response, make sure to
track the BSS parameter change count for each link, including
the assoc link.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230619161906.1799c164e7e9.I8e2c1f5eec6eec3fab525ae2dead9f6f099a2427@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Check that all the NSS in the EHT basic MCS/NSS set
are actually supported, otherwise disable EHT for the
connection.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230618214436.737827c906c9.I0c11a3cd46ab4dcb774c11a5bbc30aecfb6fce11@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Update the MLE STA reconfig sub-type to 802.11be D3.0
format, which includes the operation update field.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230618214436.2e1383b31f07.I8055a111c8fcf22e833e60f5587a4d8d21caca5b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add support for handling link removal indicated by the
Reconfiguration Multi-Link element.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230618214436.d8a046dc0c1a.I4dcf794da2a2d9f4e5f63a4b32158075d27c0660@changeid
[use cfg80211_links_removed() API instead]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
There are cases where keeping sdata locked for an operation. Add a
variant that does not take sdata lock to permit these usecases.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The helper functions to retrieve the EML capabilities and medium
synchronization delay both assume that the type is correct. Instead of
assuming the length is correct and still checking the type, add a new
helper to check both and don't do any verification.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230618214435.1b50e7a3b3cf.I9385514d8eb6d6d3c82479a6fa732ef65313e554@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
As a preparation to support Reconfiguration Multi Link
element, rename 'multi_link' and 'multi_link_len' fields
in 'struct ieee802_11_elems' to 'ml_basic' and 'ml_basic_len'.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616094949.b11370d3066a.I34280ae3728597056a6a2f313063962206c0d581@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
For now, fix this only in station mode. We'll need to fix
the AP mode later.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616094948.41e662ba1d68.I8faae5acb45c58cfeeb6bc6247aedbdaf9249d32@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In both of these cases (config_link, prep_channel) it is not needed
to parse the MBSSID data for a nontransmitted BSS. In the config_link
case the frame does not contain any MBSSID element and inheritance
rules are only needed for the ML STA profile. While in the
prep_channel case the IEs have already been processed by cfg80211 and
are already exploded.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616094948.66d2605ff0ad.I7cdd1d390e7b0735c46204231a9e636d45b7f1e4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When the association is complete, do not configure disabled
links, and track them as part of the interface data.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230608163202.c194fabeb81a.Iaefdef5ba0492afe9a5ede14c68060a4af36e444@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
There are some locking changes that will later otherwise
cause conflicts, so merge wireless into wireless-next to
avoid those.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
As a preparation to support disabled/dormant links, add the
following function:
- ieee80211_vif_usable_links(): returns the bitmap of the links
that can be activated. Use this function in all the places that
the bitmap of the usable links is needed.
- ieee80211_vif_is_mld(): returns true iff the vif is an MLD.
Use this function in all the places where an indication that the
connection is a MLD is needed.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230608163202.86e3351da1fc.If6fe3a339fda2019f13f57ff768ecffb711b710a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The channel switch parsing code would simply return if a scan is
in-progress. Supposedly, this was because channel switch announcements
from other APs should be ignored.
For the beacon case, the function is already only called if we are
associated with the sender. For the action frame cases, add the
appropriate check whether the frame is coming from the AP we are
associated with. Finally, drop the scanning check from
ieee80211_sta_process_chanswitch.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230608163202.3366e9302468.I6c7e0b58c33b7fb4c675374cfe8c3a5cddcec416@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
These messages apply to a single link only, use link_info()
to indicate that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230608163202.21a6bece4313.I08118e5e851fae2f9e43f8a58d3b6217709bf578@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
There's quite a bit of code accessing sband iftype data
(HE, HE 6 GHz, EHT) and we always need to remember to use
the ieee80211_vif_type_p2p() helper. Add new helpers to
directly get it from the sband/vif rather than having to
call ieee80211_vif_type_p2p().
Convert most code with the following spatch:
@@
expression vif, sband;
@@
-ieee80211_get_he_iftype_cap(sband, ieee80211_vif_type_p2p(vif))
+ieee80211_get_he_iftype_cap_vif(sband, vif)
@@
expression vif, sband;
@@
-ieee80211_get_eht_iftype_cap(sband, ieee80211_vif_type_p2p(vif))
+ieee80211_get_eht_iftype_cap_vif(sband, vif)
@@
expression vif, sband;
@@
-ieee80211_get_he_6ghz_capa(sband, ieee80211_vif_type_p2p(vif))
+ieee80211_get_he_6ghz_capa_vif(sband, vif)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230604120651.db099f49e764.Ie892966c49e22c7b7ee1073bc684f142debfdc84@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When fragmenting the ML per STA profile, the element ID should be
IEEE80211_MLE_SUBELEM_PER_STA_PROFILE rather than WLAN_EID_FRAGMENT.
Change the helper function to take the to be used element ID and pass
the appropriate value for each of the fragmentation levels.
Fixes: 81151ce462e5 ("wifi: mac80211: support MLO authentication/association with one link")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230611121219.9b5c793d904b.I7dad952bea8e555e2f3139fbd415d0cd2b3a08c3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Move the beacon loss work that might cause a disconnect
and the CSA disconnect work to be wiphy work, so we hold
the wiphy lock for them.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Channel switch obviously must be handled per link, and we
have a (potential) deadlock when canceling that work. Use
the new delayed wiphy work to handle this instead and get
rid of the explicit timer that way too.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
SMPS requests are per link, and currently there's a potential
deadlock with canceling. Use the new wiphy work to handle SMPS
instead, so that the cancel cannot deadlock.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We'll need this later to convert other works that might
be cancelled from here, so convert this one first.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
There are a number of upcoming things in both the stack and
drivers that would otherwise conflict, so merge wireless to
wireless-next to be able to avoid those conflicts.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently, enum ieee80211_bss_change has more than 32 flags.
Change the type of the corresponding variables from u32 to u64.
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230604120651.10354a05eaf1.If19359262fe2728dd523ea6d7c3aa7dc50940411@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
There are drivers which need this information.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230604120651.b1043f3126e2.Iad3806f8bf8df07f52ef0a02cc3d0373c44a8c93@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We need to teach the low level driver about the EML capability which
includes information for EMLSR / EMLMR operation.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230504134511.828474-11-gregory.greenman@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Skip the EHT BSS membership selector for getting rates.
While at it, add the definitions for GLK and EPS, and
sort the list.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230504134511.828474-9-gregory.greenman@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
There were two bugs when creating the non-inheritence
element:
1) 'at_extension' needs to be declared outside the loop,
otherwise the value resets every iteration and we
can never really switch properly
2) 'added' never got set to true, so we always cut off
the extension element again at the end of the function
This shows another issue that we might add a list but no
extension list, but we need to make the extension list a
zero-length one in that case.
Fix all these issues. While at it, add a comment explaining
the trim.
Fixes: 81151ce462e5 ("wifi: mac80211: support MLO authentication/association with one link")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230604120651.3addaa5c4782.If3a78f9305997ad7ef4ba7ffc17a8234c956f613@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The return type here should be u64 for the flags, even
if it doesn't matter right now because it doesn't return
any flags that don't fit into u32.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230301115906.d67ccae57d60.Ia4768e547ba8b1deb2b84ce3bbfbe216d5bfff6a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We already exited the function if sta ended up NULL,
so just remove the extra check.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230301115906.4cbac9cfd03a.I21ec81c96d246afdabc2b0807d3856e6b1182cb7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We should perhaps support this API for MLO, but it's not
clear that it makes sense, in any case then we'd have to
update it to probe the correct BSS.
For now, if it happens, warn only once so that we don't
get flooded with messages if the driver misbehaves and
calls this.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230301115906.1c8499b6fbe6.I1a76a2be3b42ff93904870ac069f0319507adc23@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add puncturing bitmap in channel switch notifications
and corresponding trace functions.
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Link: https://lore.kernel.org/r/20230131001227.25014-4-quic_alokad@quicinc.com
[fix qtnfmac]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
- Move ieee80211_valid_disable_subchannel_bitmap() from mlme.c to
chan.c, rename it as cfg80211_valid_disable_subchannel_bitmap()
and export it.
- Modify the prototype to include struct cfg80211_chan_def instead
of only bandwidth to support a check which returns false if the
primary channel is punctured.
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Link: https://lore.kernel.org/r/20230131001227.25014-2-quic_alokad@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|