summaryrefslogtreecommitdiff
path: root/net/mac80211/trace.h
AgeCommit message (Collapse)AuthorFilesLines
2021-11-26mac80211: add support for .ndo_fill_forward_pathFelix Fietkau1-0/+7
This allows drivers to provide a destination device + info for flow offload Only supported in combination with 802.3 encap offload Signed-off-by: Felix Fietkau <nbd@nbd.name> Tested-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/20211112112223.1209-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-08-24mac80211: introduce individual TWT support in AP modeLorenzo Bianconi1-0/+67
Introduce TWT action frames parsing support to mac80211. Currently just individual TWT agreement are support in AP mode. Whenever the AP receives a TWT action frame from an associated client, after performing sanity checks, it will notify the underlay driver with requested parameters in order to check if they are supported and if there is enough room for a new agreement. The driver is expected to set the agreement result and report it to mac80211. Drivers supporting this have two new callbacks: - add_twt_setup (mandatory) - twt_teardown_request (optional) mac80211 will send an action frame reply according to the result reported by the driver. Tested-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/257512f2e22ba42b9f2624942a128dd8f141de4b.1629741512.git.lorenzo@kernel.org [use le16p_replace_bits(), minor cleanups, use (void *) casts, fix to use ieee80211_get_he_iftype_cap() correctly] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23mac80211: notify driver on mgd TX completionJohannes Berg1-6/+27
We have mgd_prepare_tx(), but sometimes drivers may want/need to take action when the exchange finishes, whether successfully or not. Add a notification to the driver on completion, i.e. call the new method mgd_complete_tx(). To unify the two scenarios, and to add more information, make both of them take a struct that has the duration (prepare only), subtype (both) and success (complete only). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210618133832.5d94e78f6230.I6dc979606b6f28701b740d7aab725f7853a5a155@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-01-21mac80211: add rx decapsulation offload supportFelix Fietkau1-1/+17
This allows drivers to pass 802.3 frames to mac80211, with some restrictions: - the skb must be passed with a valid sta - fast-rx needs to be active for the sta - monitor mode needs to be disabled mac80211 will tell the driver when it is safe to enable rx decap offload for a particular station. In order to implement support, a driver must: - call ieee80211_hw_set(hw, SUPPORTS_RX_DECAP_OFFLOAD) - implement ops->sta_set_decap_offload - mark 802.3 frames with RX_FLAG_8023 If it doesn't want to enable offload for some vif types, it can mask out IEEE80211_OFFLOAD_DECAP_ENABLED in vif->offload_flags from within the .add_interface or .update_vif_offload driver ops Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20201218184718.93650-6-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11mac80211: support driver-based disconnect with reconnect hintJohannes Berg1-1/+22
Support the driver indicating that a disconnection needs to be performed, and pass through the reconnect hint in this case. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201206145305.5c8dab7a22a0.I58459fdf6968b16c90cab9c574f0f04ca22b0c79@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: notify the driver when a sta uses 4-address modeFelix Fietkau1-0/+27
This is needed for encapsulation offload of 4-address mode packets Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-14-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: rework tx encapsulation offload APIFelix Fietkau1-0/+6
The current API (which lets the driver turn on/off per vif directly) has a number of limitations: - it does not deal with AP_VLAN - conditions for enabling (no tkip, no monitor) are only checked at add_interface time - no way to indicate 4-addr support In order to address this, store offload flags in struct ieee80211_vif (easy to extend for decap offload later). mac80211 initially sets the enable flag, but gives the driver a chance to modify it before its settings are applied. In addition to the .add_interface op, a .update_vif_offload op is introduced, which can be used for runtime changes. If a driver can't disable encap offload at runtime, or if it has some extra limitations, it can simply override the flags within those ops. Support for encap offload with 4-address mode interfaces can be enabled by setting a flag from .add_interface or .update_vif_offload. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-6-nbd@nbd.name [resolved conflict with commit aa2092a9bab3 ("ath11k: add raw mode and software crypto support")] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-08-03mac80211: use eth_zero_addr() to clear mac addressMiaohe Lin1-1/+2
Use eth_zero_addr() to clear mac address instead of memset(). Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Link: https://lore.kernel.org/r/1596273158-24183-1-git-send-email-linmiaohe@huawei.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-24mac80211: handle channel frequency offsetThomas Pedersen1-8/+33
cfg80211_chan_def and ieee80211_channel recently gained a frequency offset component. Handle this where it makes sense (potentially required by S1G channels). For IBSS, TDLS, CSA, and ROC we return -EOPNOTSUPP if a channel with frequency offset is passed, since they may or may not work. Once someone tests and verifies these commands work on thos types of channels, we can remove that error. join_ocb and join_mesh look harmless because they use a simple ieee80211_vif_use_channel(), which is using an already verified channel, so we let those through. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200402011810.22947-4-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-11-27ftrace: Rework event_create_dir()Peter Zijlstra1-14/+14
Rework event_create_dir() to use an array of static data instead of function pointers where possible. The problem is that it would call the function pointer on module load before parse_args(), possibly even before jump_labels were initialized. Luckily the generated functions don't use jump_labels but it still seems fragile. It also gets in the way of changing when we make the module map executable. The generated function are basically calling trace_define_field() with a bunch of static arguments. So instead of a function, capture these arguments in a static array, avoiding the function call. Now there are a number of cases where the fields are dynamic (syscall arguments, kprobes and uprobes), in which case a static array does not work, for these we preserve the function call. Luckily all these cases are not related to modules and so we can retain the function call for them. Also fix up all broken tracepoint definitions that now generate a compile error. Tested-by: Alexei Starovoitov <ast@kernel.org> Tested-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Acked-by: Alexei Starovoitov <ast@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20191111132458.342979914@infradead.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-26mac80211: pass the vif to cancel_remain_on_channelEmmanuel Grumbach1-3/+4
This low level driver can find it useful to get the vif when a remain on channel session is cancelled. iwlwifi will need this soon. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Link: https://lore.kernel.org/r/20190723180001.5828-1-emmanuel.grumbach@intel.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-26mac80211: store tx power value from user to stationAshok Raj Nagarajan1-0/+30
This patch introduce a new driver callback drv_sta_set_txpwr. This API will copy the transmit power value passed from user space and call the driver callback to set the tx power for the station. Co-developed-by: Balaji Pothunoori <bpothuno@codeaurora.org> Signed-off-by: Ashok Raj Nagarajan <arnagara@codeaurora.org> Signed-off-by: Balaji Pothunoori <bpothuno@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-22mac80211: notify driver on subsequent CSA beaconsSara Sharon1-2/+38
Some drivers may want to track further the CSA beacons, for example to compensate for buggy APs that change the beacon count or quiet mode during CSA flow. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-22mac80211: abort CSA if beacon does not include CSA IEsSara Sharon1-0/+6
In case we receive a beacon without CSA IE while we are in the middle of channel switch - abort the operation. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-11-09mac80211: allow drivers to use peer measurement APIJohannes Berg1-0/+12
There's nothing much for mac80211 to do, so only pass through the requests with minimal checks and tracing. The driver must call cfg80211's results APIs. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-11-09mac80211: tracing: avoid 'idx' variableJohannes Berg1-3/+3
This variable shadows something that gets generated inside the tracing macros, which causes sparse to warn. Avoid it so sparse output is more readable, even if it doesn't seem to cause any trouble. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-10-12mac80211: support FTM responder configuration/statisticsPradeep Kumar Chitrapu1-0/+23
New bss param ftm_responder is used to notify the driver to enable fine timing request (FTM) responder role in AP mode. Plumb the new cfg80211 API for FTM responder statistics through to the driver API in mac80211. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-06-18mac80211: add support for HELuca Coelho1-1/+1
Add support for HE in mac80211 conforming with P802.11ax_D1.4. Johannes: Fix another bug with the buf_size comparison in agg-rx.c. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Ido Yariv <idox.yariv@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-05-23mac80211: Support adding duration for prepare_tx() callbackIlan Peer1-3/+22
There are specific cases, such as SAE authentication exchange, that might require long duration to complete. For such cases, add support for indicating to the driver the required duration of the prepare_tx() operation, so the driver would still be able to complete the frame exchange. Currently, indicate the duration only for SAE authentication exchange, as SAE authentication can take up to 2000 msec (as defined in IEEE P802.11-REVmd D1.0 p. 3504). As the patch modified the prepare_tx() callback API, also modify the relevant code in iwlwifi. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-13mac80211: add the action to the drv_ampdu_action tracepointEmmanuel Grumbach1-4/+7
It is very useful to know what ampdu action is currently happening. Add this information to the tracepoint. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-02-09cfg80211: fix NAN bands definitionLuca Coelho1-8/+8
The nl80211_nan_dual_band_conf enumeration doesn't make much sense. The default value is assigned to a bit, which makes it weird if the default bit and other bits are set at the same time. To improve this, get rid of NL80211_NAN_BAND_DEFAULT and add a wiphy configuration to let the drivers define which bands are supported. This is exposed to the userspace, which then can make a decision on which band(s) to use. Additionally, rename all "dual_band" elements to "bands", to make things clearer. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-02-08mac80211: Pass new RSSI level in CQM RSSI notificationAndrzej Zaborowski1-4/+7
Extend ieee80211_cqm_rssi_notify with a rssi_level parameter so that this information can be passed to netlink clients in the next patch, if available. Most drivers will have this value at hand. wl1251 receives events from the firmware that only tell it whether latest measurement is above or below threshold so we don't pass any value at this time (parameter is 0). Signed-off-by: Andrew Zaborowski <andrew.zaborowski@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-09-30mac80211: add offset_tsf driver op and use it for meshPedersen, Thomas1-0/+26
This allows the mesh sync (and debugfs) code to make incremental TSF adjustments, avoiding any uncertainty introduced by delay in programming absolute TSF. Signed-off-by: Thomas Pedersen <twp@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-09-30mac80211: Implement add_nan_func and rm_nan_funcAyala Beker1-0/+52
Implement add/rm_nan_func functions and handle NAN function termination notifications. Handle instance_id allocation for NAN functions and implement the reconfig flow. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-09-30mac80211: implement nan_change_confAyala Beker1-0/+31
Implement nan_change_conf callback which allows to change current NAN configuration (master preference and dual band operation). Store the current NAN configuration in sdata, so it can be used both to provide the driver the updated configuration with changes and also it will be used in hw reconfig flows in next patches. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-09-30mac80211: add boilerplate code for start / stop NANAyala Beker1-0/+50
This code doesn't do much besides allowing to start and stop the vif. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Ayala Beker <ayala.beker@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-12cfg80211: remove enum ieee80211_bandJohannes Berg1-3/+3
This enum is already perfectly aliased to enum nl80211_band, and the only reason for it is that we get IEEE80211_NUM_BANDS out of it. There's no really good reason to not declare the number of bands in nl80211 though, so do that and remove the cfg80211 one. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: synchronize driver rx queues before removing a stationSara Sharon1-0/+12
Some devices, like iwlwifi, have RSS queues. This may cause a situation where a disassociation is handled in control path and results in station removal while there are prior RX frames that were still not processed in other queues. When they will be processed the station will be gone, and the frames will be dropped. Add a synchronization interface to avoid that. When driver returns from the synchronization mac80211 may remove the station. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-01-14mac80211: pass block ack session timeout to to driverSara Sharon1-20/+23
Currently mac80211 does not inform the driver of the session block ack timeout when starting a rx aggregation session. Drivers that manage the reorder buffer need to know this parameter. Seeing that there are now too many arguments for the drv_ampdu_action() function, wrap them inside a structure. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-12-04mac80211: allow the driver to send EOSP when neededEmmanuel Grumbach1-0/+25
This can happen when the driver needs to send less frames than expected and then needs to close the SP. Mac80211 still needs to set the more_data properly based on its buffer state (ps_tx_buffer and buffered frames on other TIDs). To that end, refactor the code that delivers frames upon uAPSD trigger frames to be able to get only the more_data bit without actually delivering those frames in case the driver is just asking to set a NDP with EOSP and MORE_DATA bit properly set. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-11-03mac80211: allow null chandef in tracingArik Nemtsov1-5/+5
In TDLS channel-switch operations the chandef can sometimes be NULL. Avoid an oops in the trace code for these cases and just print a chandef full of zeros. Cc: stable@vger.kernel.org Fixes: a7a6bdd0670fe ("mac80211: introduce TDLS channel switch ops") Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-14mac80211: remove PM-QoS listenerJohannes Berg1-2/+0
As this API has never really seen any use and most drivers don't ever use the value derived from it, remove it. Change the only driver using it (rt2x00) to simply use the DTIM period instead of the "max sleep" time. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-22mac80211: allow to transmit A-MSDU within A-MPDUEmmanuel Grumbach1-4/+6
Advertise the capability to send A-MSDU within A-MPDU in the AddBA request sent by mac80211. Let the driver know about the peer's capabilities. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-22mac80211: introduce per vif frame registration APIAndrei Otcheretianski1-0/+30
Currently the cfg80211's frame registration api receives wdev, however mac80211 assumes per device filter configuration and ignores wdev. Per device filtering is too wasteful, especially for multi-channel devices. Introduce new per vif frame registration API and use it for probe request registrations in ieee80211_mgmt_frame_register() Also call directly to ieee80211_configure_filter instead of using a work since it is now allowed to sleep in ieee80211_mgmt_frame_register. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-05-06mac80211: extend get_tkip_seq to all keysJohannes Berg1-20/+22
Extend the function to read the TKIP IV32/IV16 to read the IV/PN for all ciphers in order to allow drivers with full hardware crypto to properly support this. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-7/+38
Pull networking updates from David Miller: 1) Add BQL support to via-rhine, from Tino Reichardt. 2) Integrate SWITCHDEV layer support into the DSA layer, so DSA drivers can support hw switch offloading. From Floria Fainelli. 3) Allow 'ip address' commands to initiate multicast group join/leave, from Madhu Challa. 4) Many ipv4 FIB lookup optimizations from Alexander Duyck. 5) Support EBPF in cls_bpf classifier and act_bpf action, from Daniel Borkmann. 6) Remove the ugly compat support in ARP for ugly layers like ax25, rose, etc. And use this to clean up the neigh layer, then use it to implement MPLS support. All from Eric Biederman. 7) Support L3 forwarding offloading in switches, from Scott Feldman. 8) Collapse the LOCAL and MAIN ipv4 FIB tables when possible, to speed up route lookups even further. From Alexander Duyck. 9) Many improvements and bug fixes to the rhashtable implementation, from Herbert Xu and Thomas Graf. In particular, in the case where an rhashtable user bulk adds a large number of items into an empty table, we expand the table much more sanely. 10) Don't make the tcp_metrics hash table per-namespace, from Eric Biederman. 11) Extend EBPF to access SKB fields, from Alexei Starovoitov. 12) Split out new connection request sockets so that they can be established in the main hash table. Much less false sharing since hash lookups go direct to the request sockets instead of having to go first to the listener then to the request socks hashed underneath. From Eric Dumazet. 13) Add async I/O support for crytpo AF_ALG sockets, from Tadeusz Struk. 14) Support stable privacy address generation for RFC7217 in IPV6. From Hannes Frederic Sowa. 15) Hash network namespace into IP frag IDs, also from Hannes Frederic Sowa. 16) Convert PTP get/set methods to use 64-bit time, from Richard Cochran. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1816 commits) fm10k: Bump driver version to 0.15.2 fm10k: corrected VF multicast update fm10k: mbx_update_max_size does not drop all oversized messages fm10k: reset head instead of calling update_max_size fm10k: renamed mbx_tx_dropped to mbx_tx_oversized fm10k: update xcast mode before synchronizing multicast addresses fm10k: start service timer on probe fm10k: fix function header comment fm10k: comment next_vf_mbx flow fm10k: don't handle mailbox events in iov_event path and always process mailbox fm10k: use separate workqueue for fm10k driver fm10k: Set PF queues to unlimited bandwidth during virtualization fm10k: expose tx_timeout_count as an ethtool stat fm10k: only increment tx_timeout_count in Tx hang path fm10k: remove extraneous "Reset interface" message fm10k: separate PF only stats so that VF does not display them fm10k: use hw->mac.max_queues for stats fm10k: only show actual queues, not the maximum in hardware fm10k: allow creation of VLAN on default vid fm10k: fix unused warnings ...
2015-04-07mac80211: Move message tracepoints to their own headerSteven Rostedt (Red Hat)1-38/+0
Every tracing file must have its own TRACE_SYSTEM defined. The mac80211 tracepoint header broke this and add in the middle of the file had: #undef TRACE_SYSTEM #define TRACE_SYSTEM mac80211_msg Unfortunately, this broke new code in the ftrace infrastructure. Moving the mac80211_msg into its own trace file with its own TRACE_SYSTEM defined fixes the issue. Link: http://lkml.kernel.org/r/1428389938.1841.1.camel@sipsolutions.net Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-04-01mac80211: add an intermediate software queue implementationFelix Fietkau1-0/+31
This allows drivers to request per-vif and per-sta-tid queues from which they can pull frames. This makes it easier to keep the hardware queues short, and to improve fairness between clients and vifs. The task of scheduling packet transmission is left up to the driver - queueing is controlled by mac80211. Drivers can only dequeue packets by calling ieee80211_tx_dequeue. This makes it possible to add active queue management later without changing drivers using this code. This can also be used as a starting point to implement A-MSDU aggregation in a way that does not add artificially induced latency. Signed-off-by: Felix Fietkau <nbd@openwrt.org> [resolved minor context conflict, minor changes, endian annotations] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-30mac80211: convert rssi_callback() to event_callback()Emmanuel Grumbach1-7/+7
We will be able to add more events, such as MLME events and others. The low level driver may be interested in knowing about these events to dump firmware data upon failures, or to change parameters in case connection attempts fail etc... Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-08mac80211: allow drivers to provide most station statisticsJohannes Berg1-26/+7
In many cases, drivers can filter things like beacons that will skew statistics reported by mac80211. To get correct statistics in these cases, call drivers to obtain statistics and let them override all values, filling values from mac80211 if the driver didn't provide them. Not all of them make sense for the driver to fill, so some are still always done by mac80211. Note that this doesn't currently allow a driver to say "I know this value is wrong, don't report it at all", or to sum it up with a mac80211 value (as could be useful for "dropped misc"), that can be added if it turns out to be needed. This also gets rid of the get_rssi() method as is can now be implemented using sta_statistics(). Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-26cfg80211: clean up beacon loss CQM eventJohannes Berg1-0/+6
Having it as a sub-event for RSSI thresholds is very ugly, but luckily no userspace actually uses the events yet. Move the event to its own function call internally and to its own event attribute in nl80211. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: notify drivers on sta rate table changesJohannes Berg1-0/+7
This allows drivers with a firmware or chip-based rate lookup table to use the most recent default rate selection without having to get it from per-packet data or explicit ieee80211_get_tx_rate calls Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: allow drivers to support NL80211_SCAN_FLAG_RANDOM_ADDRJohannes Berg1-6/+25
Allow drivers to support NL80211_SCAN_FLAG_RANDOM_ADDR with software based scanning and generate a random MAC address for them for every scan request with the flag. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: add TDLS channel-switch Rx flowArik Nemtsov1-0/+45
When receiving a TDLS channel switch request or response, parse the frame and call a new tdls_recv_channel_switch op in the low level driver with the parsed data. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: introduce TDLS channel switch opsArik Nemtsov1-0/+57
Implement the cfg80211 TDLS channel switch ops and introduce new mac80211 ones for low-level drivers. Verify low-level driver support for the new ops when using the relevant wiphy feature bit. Also verify the peer supports channel switching before passing the command down. Add a new STA flag to track the off-channel state with the TDLS peer and make sure to cancel the channel-switch if the peer STA is unexpectedly removed. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-10mac80211: add device_timestamp to the drv_pre_channel_switch traceLuciano Coelho1-0/+2
The device_timestamp value was left out of the event trace for drv_pre_channel_switch by mistake. Add it. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-04mac80211: replace restart_complete() with reconfig_complete()Eliad Peller1-3/+20
Drivers might want to know also when mac80211 has completed reconfiguring after resume (e.g. in order to know when frames can be passed to mac80211). Rename restart_complete() to a more-generic reconfig_complete(), and add a new enum to indicate the reconfiguration type. Update the current users with the new prototype. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-04mac80211: add support for driver tx power reportingFelix Fietkau1-0/+27
The configured tx power is often limited by hardware capabilities, channel settings, antenna configuration, etc. Signed-off-by: Felix Fietkau <nbd@openwrt.org> [fix tracing compilation] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-09mac80211: allow channel switch with multiple channel contextsLuciano Coelho1-3/+6
Channel switch with multiple channel contexts should now work fine. Remove check that disallows switches when multiple contexts are in use. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>