summaryrefslogtreecommitdiff
path: root/net/mac80211/util.c
AgeCommit message (Collapse)AuthorFilesLines
2021-06-18mac80211: handle various extensible elements correctlyJohannes Berg1-11/+11
Various elements are parsed with a requirement to have an exact size, when really we should only check that they have the minimum size that we need. Check only that and therefore ignore any additional data that they might carry. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210618133832.cd101f8040a4.Iadf0e9b37b100c6c6e79c7b298cc657c2be9151a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-09mac80211: move interface shutdown out of wiphy lockJohannes Berg1-2/+0
When reconfiguration fails, we shut down everything, but we cannot call cfg80211_shutdown_all_interfaces() with the wiphy mutex held. Since cfg80211 now calls it on resume errors, we only need to do likewise for where we call reconfig (whether directly or indirectly), but not under the wiphy lock. Cc: stable@vger.kernel.org Fixes: 2fe8ef106238 ("cfg80211: change netdev registration/unregistration semantics") Link: https://lore.kernel.org/r/20210608113226.78233c80f548.Iecc104aceb89f0568f50e9670a9cb191a1c8887b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-04-19mac80211: make ieee80211_vif_to_wdev work when the vif isn't in the driverEmmanuel Grumbach1-9/+1
This will allow the low level driver to get the wdev during the add_interface flow. In order to do that, remove a few checks from there and do not return NULL for vifs that were not yet added to the driver. Note that all the current callers of this helper function assume that the vif already exists: - The callers from the drivers already have a vif pointer. Before this change, ieee80211_vif_to_wdev would return NULL in some cases, but those callers don't even check they get a non-NULL pointer from ieee80211_vif_to_wdev. - The callers from net/mac80211/cfg.c assume the vif is already added to the driver as well. So, this change has no impact on existing callers of this helper function. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210409123755.6078d3517095.I1907a45f267a62dab052bcc44428aa7a2005ffc9@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-03-16mac80211: Allow HE operation to be longer than expected.Brian Norris1-1/+1
We observed some Cisco APs sending the following HE Operation IE in associate response: ff 0a 24 f4 3f 00 01 fc ff 00 00 00 Its HE operation parameter is 0x003ff4, so the expected total length is 7 which does not match the actual length = 10. This causes association failing with "HE AP is missing HE Capability/operation." According to P802.11ax_D4 Table9-94, HE operation is extensible, and according to 802.11-2016 10.27.8, STA should discard the part beyond the maximum length and parse the truncated element. Allow HE operation element to be longer than expected to handle this case and future extensions. Fixes: e4d005b80dee ("mac80211: refactor extended element parsing") Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Yen-lin Lai <yenlinlai@chromium.org> Link: https://lore.kernel.org/r/20210223051926.2653301-1-yenlinlai@chromium.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-01-26cfg80211: avoid holding the RTNL when calling the driverJohannes Berg1-7/+7
Currently, _everything_ in cfg80211 holds the RTNL, and if you have a slow USB device (or a few) you can get some bad lock contention on that. Fix that by re-adding a mutex to each wiphy/rdev as we had at some point, so we have locking for the wireless_dev lists and all the other things in there, and also so that drivers still don't have to worry too much about it (they still won't get parallel calls for a single device). Then, we can restrict the RTNL to a few cases where we add or remove interfaces and really need the added protection. Some of the global list management still also uses the RTNL, since we need to have it anyway for netdev management, but we only hold the RTNL for very short periods of time here. Link: https://lore.kernel.org/r/20210122161942.81df9f5e047a.I4a8e1a60b18863ea8c5e6d3a0faeafb2d45b2f40@changeid Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> [marvell driver issues] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-12Merge tag 'mac80211-next-for-net-next-2020-12-11' of ↵Jakub Kicinski1-1/+65
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== A new set of wireless changes: * validate key indices for key deletion * more preamble support in mac80211 * various 6 GHz scan fixes/improvements * a common SAR power limitations API * various small fixes & code improvements * tag 'mac80211-next-for-net-next-2020-12-11' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next: (35 commits) mac80211: add ieee80211_set_sar_specs nl80211: add common API to configure SAR power limitations mac80211: fix a mistake check for rx_stats update mac80211: mlme: save ssid info to ieee80211_bss_conf while assoc mac80211: Update rate control on channel change mac80211: don't filter out beacons once we start CSA mac80211: Fix calculation of minimal channel width mac80211: ignore country element TX power on 6 GHz mac80211: use bitfield helpers for BA session action frames mac80211: support Rx timestamp calculation for all preamble types mac80211: don't set set TDLS STA bandwidth wider than possible mac80211: support driver-based disconnect with reconnect hint cfg80211: support immediate reconnect request hint mac80211: use struct assignment for he_obss_pd cfg80211: remove struct ieee80211_he_bss_color nl80211: validate key indexes for cfg80211_registered_device cfg80211: include block-tx flag in channel switch started event mac80211: disallow band-switch during CSA ieee80211: update reduced neighbor report TBTT info length cfg80211: Save the regulatory domain when setting custom regulatory ... ==================== Link: https://lore.kernel.org/r/20201211142552.209018-1-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+1
xdp_return_frame_bulk() needs to pass a xdp_buff to __xdp_return(). strlcpy got converted to strscpy but here it makes no functional difference, so just keep the right code. Conflicts: net/netfilter/nf_tables_api.c Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-11mac80211: support Rx timestamp calculation for all preamble typesAvraham Stern1-1/+65
Add support for calculating the Rx timestamp for HE frames. Since now all frame types are supported, allow setting the Rx timestamp regardless of the frame type. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201206145305.4786559af475.Ia54486bb0a12e5351f9d5c60ef6fcda7c9e7141c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-04mac80211: fix return value of ieee80211_chandef_he_6ghz_operWen Gong1-1/+1
ieee80211_chandef_he_6ghz_oper() needs to return true if it determined a value 6 GHz chandef, fix that. Fixes: 1d00ce807efa ("mac80211: support S1G association") Signed-off-by: Wen Gong <wgong@codeaurora.org> Link: https://lore.kernel.org/r/1606121152-3452-1-git-send-email-wgong@codeaurora.org [rewrite commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-11-13Merge tag 'mac80211-next-for-net-next-2020-11-13' of ↵Jakub Kicinski1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Some updates: * injection/radiotap updates for new test capabilities * remove WDS support - even years ago when we turned it off by default it was already basically unusable * support for HE (802.11ax) rates for beacons * support for some vendor-specific HE rates * many other small features/cleanups * tag 'mac80211-next-for-net-next-2020-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next: (21 commits) nl80211: fix kernel-doc warning in the new SAE attribute cfg80211: remove WDS code mac80211: remove WDS-related code rt2x00: remove WDS code b43legacy: remove WDS code b43: remove WDS code carl9170: remove WDS code ath9k: remove WDS code wireless: remove CONFIG_WIRELESS_WDS mac80211: assure that certain drivers adhere to DONT_REORDER flag mac80211: don't overwrite QoS TID of injected frames mac80211: adhere to Tx control flag that prevents frame reordering mac80211: add radiotap flag to assure frames are not reordered mac80211: save HE oper info in BSS config for mesh cfg80211: add support to configure HE MCS for beacon rate nl80211: fix beacon tx rate mask validation nl80211/cfg80211: fix potential infinite loop cfg80211: Add support to calculate and report 4096-QAM HE rates cfg80211: Add support to configure SAE PWE value to drivers ieee80211: Add definition for WFA DPP ... ==================== Link: https://lore.kernel.org/r/20201113101148.25268-1-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-11mac80211: remove WDS-related codeJohannes Berg1-1/+1
Now that all the mac80211-based drivers have removed WDS code and in particular the ability to advertise such devices, also remove all the code related to WDS here. Link: https://lore.kernel.org/r/20201109105103.38960c413d46.I3603c90a44562d847c39d15d5ff33d8c00df5834@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-11-07net: mac80211: convert tasklets to use new tasklet_setup() APIAllen Pais1-2/+3
In preparation for unconditionally passing the struct tasklet_struct pointer to all tasklet callbacks, switch to using the new tasklet_setup() and from_tasklet() to pass the tasklet pointer explicitly. Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Allen Pais <apais@linux.microsoft.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-09-28mac80211: Support not iterating over not-sdata-in-driver ifacesBen Greear1-0/+3
Allow drivers to request that interface-iterator does NOT iterate over interfaces that are not sdata-in-driver. This will allow us to fix crashes in ath10k (and possibly other drivers). To summarize Johannes' explanation: Consider add interface wlan0 add interface wlan1 iterate active interfaces -> wlan0 wlan1 add interface wlan2 iterate active interfaces -> wlan0 wlan1 wlan2 If you apply this scenario to a restart, which ought to be functionally equivalent to the normal startup, just compressed in time, you're basically saying that today you get add interface wlan0 add interface wlan1 iterate active interfaces -> wlan0 wlan1 wlan2 << problem here add interface wlan2 iterate active interfaces -> wlan0 wlan1 wlan2 which yeah, totally seems wrong. But fixing that to be add interface wlan0 add interface wlan1 iterate active interfaces -> <nothing> add interface wlan2 iterate active interfaces -> <nothing> (or maybe -> wlan0 wlan1 wlan2 if the reconfig already completed) This is also at least somewhat wrong, but better to not iterate over something that exists in the driver than iterate over something that does not. Originally the first issue was causing crashes in testing with lots of station vdevs on an ath10k radio, combined with firmware crashing. I ran with a similar patch for years with no obvious bad results, including significant testing with ath9k and ath10k. Signed-off-by: Ben Greear <greearb@candelatech.com> Link: https://lore.kernel.org/r/20200922191957.25257-1-greearb@candelatech.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211: support S1G associationThomas Pedersen1-0/+53
The changes required for associating in S1G are: - apply S1G BSS channel info before assoc - mark all S1G STAs as QoS STAs - include and parse AID request element - handle new Association Response format - don't fail assoc if supported rates element is missing Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-15-thomas@adapt-ip.com [pass skb to ieee80211_add_aid_request_ie(), remove unused variable 'bss'] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211: receive and process S1G beaconsThomas Pedersen1-0/+52
S1G beacons are 802.11 Extension Frames, so the fixed header part differs from regular beacons. Add a handler to process S1G beacons and abstract out the fetching of BSSID and element start locations in the beacon body handler. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-14-thomas@adapt-ip.com [don't rename, small coding style cleanups] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211: encode listen interval for S1GThomas Pedersen1-0/+21
S1G allows listen interval up to 2^14 * 10000 beacon intervals. In order to do this listen interval needs a scaling factor applied to the lower 14 bits. Calculate this and properly encode the listen interval for S1G STAs. See IEEE802.11ah-2016 Table 9-44a for reference. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-10-thomas@adapt-ip.com [move listen_int_usf into function using it] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211: convert S1G beacon to scan resultsThomas Pedersen1-0/+22
This commit finds the correct offset for Information Elements in S1G beacon frames so they can be reported in scan results. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-8-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211: support S1G STA capabilitiesThomas Pedersen1-0/+42
Include the S1G Capabilities element in an association request, and support the cfg80211 capability overrides. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-5-thomas@adapt-ip.com [pass skb to ieee80211_add_s1g_capab_ie(), small code style edits] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: fix 80 MHz association to 160/80+80 AP on 6 GHzJohn Crispin1-3/+4
When trying to associate to an AP support 180 or 80+80 MHz on 6 GHz with a STA that only has 80 Mhz support the cf2 field inside the chandef will get set causing the association to fail when trying to validate the chandef. Fix this by checking the support flags prior to setting cf2. Fixes: 57fa5e85d53ce ("mac80211: determine chandef from HE 6 GHz operation") Signed-off-by: John Crispin <john@phrozen.org> Link: https://lore.kernel.org/r/20200918115304.1135693-1-john@phrozen.org [reword commit message a bit] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-08-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-0/+4
Resolved kernel/bpf/btf.c using instructions from merge commit 69138b34a7248d2396ab85c8652e20c0c39beaba Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-31mac80211: Use fallthrough pseudo-keywordGustavo A. R. Silva1-8/+7
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20200707204548.GA9320@embeddedor Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-07-31nl80211: S1G band and channel definitionsThomas Pedersen1-0/+5
Gives drivers the definitions needed to advertise support for S1G bands. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200602062247.23212-1-thomas@adapt-ip.com Link: https://lore.kernel.org/r/20200731055636.795173-1-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-07-30mac80211: fix warning in 6 GHz IE addition in mesh modeRajkumar Manoharan1-0/+4
The commit 24a2042cb22f ("mac80211: add HE 6 GHz Band Capability element") failed to check device capability before adding HE 6 GHz capability element. Below warning is reported in 11ac device in mesh. Fix that by checking device capability at HE 6 GHz cap IE addition in mesh beacon and association request. WARNING: CPU: 1 PID: 1897 at net/mac80211/util.c:2878 ieee80211_ie_build_he_6ghz_cap+0x149/0x150 [mac80211] [ 3138.720358] Call Trace: [ 3138.720361] ieee80211_mesh_build_beacon+0x462/0x530 [mac80211] [ 3138.720363] ieee80211_start_mesh+0xa8/0xf0 [mac80211] [ 3138.720365] __cfg80211_join_mesh+0x122/0x3e0 [cfg80211] [ 3138.720368] nl80211_join_mesh+0x3d3/0x510 [cfg80211] Fixes: 24a2042cb22f ("mac80211: add HE 6 GHz Band Capability element") Reported-by: Markus Theil <markus.theil@tu-ilmenau.de> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Link: https://lore.kernel.org/r/1593656424-18240-1-git-send-email-rmanohar@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31mac80211: Add HE 6GHz capabilities element to probe requestIlan Peer1-8/+28
On 6 GHz, the 6 GHz capabilities element should be added, do that. Signed-off-by: Ilan Peer <ilan.peer@intel.com> [add commit message] Link: https://lore.kernel.org/r/20200528213443.8ee764f0cde0.I2b0c66b60e11818c97c9803e04a6a197c6376243@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31mac80211: determine chandef from HE 6 GHz operationJohannes Berg1-0/+106
Support connecting to HE 6 GHz APs and mesh networks on 6 GHz, where the HT/VHT information is missing but instead the HE 6 GHz band capability is present, and the 6 GHz Operation information field is used to encode the channel configuration instead of the HT/VHT operation elements. Also add some other bits needed to connect to 6 GHz networks. Link: https://lore.kernel.org/r/1589399105-25472-10-git-send-email-rmanohar@codeaurora.org Co-developed-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Link: https://lore.kernel.org/r/20200528213443.25687d2695bc.I3f9747c1147480f65445f13eda5c4a5ed4e86757@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31mac80211: avoid using ext NSS high BW if not supportedJohannes Berg1-4/+45
If the AP advertises inconsistent data, namely it has CCFS1 or CCFS2, but doesn't advertise support for 160/80+80 bandwidth or "Extended NSS BW Support", then we cannot use any MCSes in the the higher bandwidth. Thus, avoid connecting with higher bandwidth since it's less efficient that way. Link: https://lore.kernel.org/r/20200528213443.0e55d40c3ccc.I6fd0b4708ebd087e5e46466c3e91f6efbcbef668@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31mac80211: build HE operation with 6 GHz oper informationRajkumar Manoharan1-4/+61
Add 6 GHz operation information (IEEE 802.11ax/D6.0, Figure 9-787k) while building HE operation element for non-HE AP. This field is used to determine channel information in the absence of HT/VHT IEs. Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Link: https://lore.kernel.org/r/1589399105-25472-8-git-send-email-rmanohar@codeaurora.org [fix skb allocation size] Link: https://lore.kernel.org/r/20200528193455.76796-1-johannes@sipsolutions.net Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31mac80211: add HE 6 GHz Band Capability elementRajkumar Manoharan1-0/+46
Construct HE 6 GHz band capability element (IEEE 802.11ax/D6.0, 9.4.2.261) for association request and mesh beacon. The 6 GHz capability information is passed by driver through iftypes caps. Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Link: https://lore.kernel.org/r/1589399105-25472-7-git-send-email-rmanohar@codeaurora.org [handle SMPS, adjust for previous patches, reserve SKB space properly, change to handle SKB directly] Link: https://lore.kernel.org/r/20200528213443.643aa8101111.I3f9747c1147480f65445f13eda5c4a5ed4e86757@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31mac80211: add HE 6 GHz Band Capabilities into parse extensionRajkumar Manoharan1-0/+4
Handle 6 GHz band capability element parsing for association. Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Link: https://lore.kernel.org/r/1589399105-25472-4-git-send-email-rmanohar@codeaurora.org [some renaming to be in line with previous patches] Link: https://lore.kernel.org/r/20200528213443.a13d7a0b85b0.Ia07584da4fc77aa77c4cc563248d2ce4234ffe5d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-03-20mac80211: consider WLAN_EID_EXT_HE_OPERATION for parsing CRCJohannes Berg1-1/+5
We use the parsing CRC for checking if the beacon changed, and if the WLAN_EID_EXT_HE_OPERATION extended element changes we need to track it so we can react to that. Include it in the CRC calculation. Link: https://lore.kernel.org/r/20200131111300.891737-22-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-17Merge tag 'mac80211-next-for-net-next-2020-02-14' of ↵David S. Miller1-29/+54
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== A few big new things: * 802.11 frame encapsulation offload support * more HE (802.11ax) support, including some for 6 GHz band * powersave in hwsim, for better testing Of course as usual there are various cleanups and small fixes. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-14mac80211: fix wrong 160/80+80 MHz settingShay Bar1-2/+14
Before this patch, STA's would set new width of 160/80+80 MHz based on AP capability only. This is wrong because STA may not support > 80MHz BW. Fix is to verify STA has 160/80+80 MHz capability before increasing its width to > 80MHz. The "support_80_80" and "support_160" setting is based on: "Table 9-272 — Setting of the Supported Channel Width Set subfield and Extended NSS BW Support subfield at a STA transmitting the VHT Capabilities Information field" From "Draft P802.11REVmd_D3.0.pdf" Signed-off-by: Aviad Brikman <aviad.brikman@celeno.com> Signed-off-by: Shay Bar <shay.bar@celeno.com> Link: https://lore.kernel.org/r/20200210130728.23674-1-shay.bar@celeno.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-07mac80211: parse also the RSNXE IEShaul Triebitz1-1/+6
Parse also the RSN Extension IE when parsing the rest of the IEs. It will be used in a later patch. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20200131111300.891737-21-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-07mac80211: refactor extended element parsingJohannes Berg1-27/+48
This code was really ugly, refactor it a bit to make it more readable. While at it, use sizeof() and fix the UORA element length check bug. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20200131111300.891737-4-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-07mac80211: consider more elements in parsing CRCJohannes Berg1-6/+12
We only use the parsing CRC for checking if a beacon changed, and elements with an ID > 63 cannot be represented in the filter. Thus, like we did before with WMM and Cisco vendor elements, just statically add these forgotten items to the CRC: - WLAN_EID_VHT_OPERATION - WLAN_EID_OPMODE_NOTIF I guess that in most cases when VHT/HE operation change, the HT operation also changed, and so the change was picked up, but we did notice that pure operating mode notification changes were ignored. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20200131111300.891737-22-luca@coelho.fi [restrict to VHT for the mac80211 branch] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-12-16mac80211: Remove redundant assertionAditya Pakki1-1/+0
In wiphy_to_ieee80211_hw, the assertion to check if wiphy is NULL is repeated in wiphy_priv. The patch removes the duplicated BUG_ON check. Signed-off-by: Aditya Pakki <pakki001@umn.edu> Link: https://lore.kernel.org/r/20191215152348.20912-1-pakki001@umn.edu Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-10-01mac80211: keep BHs disabled while calling drv_tx_wake_queue()Johannes Berg1-5/+8
Drivers typically expect this, as it's the case for almost all cases where this is called (i.e. from the TX path). Also, the code in mac80211 itself (if the driver calls ieee80211_tx_dequeue()) expects this as it uses this_cpu_ptr() without additional protection. This should fix various reports of the problem: https://bugzilla.kernel.org/show_bug.cgi?id=204127 https://lore.kernel.org/linux-wireless/CAN5HydrWb3o_FE6A1XDnP1E+xS66d5kiEuhHfiGKkLNQokx13Q@mail.gmail.com/ https://lore.kernel.org/lkml/nycvar.YFH.7.76.1909111238470.473@cbobk.fhfr.pm/ Cc: stable@vger.kernel.org Reported-and-tested-by: Jiri Kosina <jkosina@suse.cz> Reported-by: Aaron Hill <aa1ronham@gmail.com> Reported-by: Lukas Redlinger <rel+kernel@agilox.net> Reported-by: Oleksii Shevchuk <alxchk@gmail.com> Fixes: 21a5d4c3a45c ("mac80211: add stop/start logic for software TXQs") Link: https://lore.kernel.org/r/1569928763-I3e8838c5ecad878e59d4a94eb069a90f6641461a@changeid Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-09-11mac80211: IBSS: send deauth when expiring inactive STAsJohannes Berg1-2/+3
When we expire an inactive station, try to send it a deauth. This helps if it's actually still around, and just has issues with beacon distribution (or we do), and it will not also remove us. Then, if we have shared state, this may not be reset properly, causing problems; for example, we saw a case where aggregation sessions weren't removed properly (due to the TX start being offloaded to firmware and it relying on deauth for stop), causing a lot of traffic to get lost due to the SN reset after remove/add of the peer. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20190830112451.21655-9-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-09-11mac80211: clear crypto tx tailroom counter upon keys enableLior Cohen1-5/+1
In case we got a fw restart while roaming from encrypted AP to non-encrypted one, we might end up with hitting a warning on the pending counter crypto_tx_tailroom_pending_dec having a non-zero value. The following comment taken from net/mac80211/key.c explains the rational for the delayed tailroom needed: /* * The reason for the delayed tailroom needed decrementing is to * make roaming faster: during roaming, all keys are first deleted * and then new keys are installed. The first new key causes the * crypto_tx_tailroom_needed_cnt to go from 0 to 1, which invokes * the cost of synchronize_net() (which can be slow). Avoid this * by deferring the crypto_tx_tailroom_needed_cnt decrementing on * key removal for a while, so if we roam the value is larger than * zero and no 0->1 transition happens. * * The cost is that if the AP switching was from an AP with keys * to one without, we still allocate tailroom while it would no * longer be needed. However, in the typical (fast) roaming case * within an ESS this usually won't happen. */ The next flow lead to the warning eventually reported as a bug: 1. Disconnect from encrypted AP 2. Set crypto_tx_tailroom_pending_dec = 1 for the key 3. Schedule work 4. Reconnect to non-encrypted AP 5. Add a new key, setting the tailroom counter = 1 6. Got FW restart while pending counter is set ---> hit the warning While on it, the ieee80211_reset_crypto_tx_tailroom() func was merged into its single caller ieee80211_reenable_keys (previously called ieee80211_enable_keys). Also, we reset the crypto_tx_tailroom_pending_dec and remove the counters warning as we just reset both. Signed-off-by: Lior Cohen <lior2.cohen@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20190830112451.21655-7-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-4/+3
Just minor overlapping changes in the conflicts here. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-26mac80211: implement HE support for meshSven Eckelmann1-0/+49
Implement the basics required for supporting high efficiency with mesh: include HE information elements in beacons, probe responses, and peering action frames, and check for compatible HE configurations when peering. Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Forwarded: https://patchwork.kernel.org/patch/11029299/ Link: https://lore.kernel.org/r/20190724163359.3507-2-sven@narfation.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-26mac80211: HE: add Spatial Reuse element parsing supportJohn Crispin1-0/+4
Add support to mac80211 for parsing SPR elements as per P802.11ax_D4.0 section 9.4.2.241. Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: John Crispin <john@phrozen.org> Link: https://lore.kernel.org/r/20190618061915.7102-2-john@phrozen.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-26{nl,mac}80211: fix interface combinations on crypto controlled devicesManikanta Pubbisetty1-4/+3
Commit 33d915d9e8ce ("{nl,mac}80211: allow 4addr AP operation on crypto controlled devices") has introduced a change which allows 4addr operation on crypto controlled devices (ex: ath10k). This change has inadvertently impacted the interface combinations logic on such devices. General rule is that software interfaces like AP/VLAN should not be listed under supported interface combinations and should not be considered during validation of these combinations; because of the aforementioned change, AP/VLAN interfaces(if present) will be checked against interfaces supported by the device and blocks valid interface combinations. Consider a case where an AP and AP/VLAN are up and running; when a second AP device is brought up on the same physical device, this AP will be checked against the AP/VLAN interface (which will not be part of supported interface combinations of the device) and blocks second AP to come up. Add a new API cfg80211_iftype_allowed() to fix the problem, this API works for all devices with/without SW crypto control. Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Fixes: 33d915d9e8ce ("{nl,mac}80211: allow 4addr AP operation on crypto controlled devices") Link: https://lore.kernel.org/r/1563779690-9716-1-git-send-email-mpubbise@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-26mac80211: add support for parsing ADDBA_EXT IEsJohn Crispin1-0/+7
ADDBA_EXT IEs can be used to negotiate the BA fragmentation level. Signed-off-by: John Crispin <john@phrozen.org> Link: https://lore.kernel.org/r/20190713163642.18491-2-john@phrozen.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-06-21Merge tag 'spdx-5.2-rc6' of ↵Linus Torvalds1-4/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx Pull still more SPDX updates from Greg KH: "Another round of SPDX updates for 5.2-rc6 Here is what I am guessing is going to be the last "big" SPDX update for 5.2. It contains all of the remaining GPLv2 and GPLv2+ updates that were "easy" to determine by pattern matching. The ones after this are going to be a bit more difficult and the people on the spdx list will be discussing them on a case-by-case basis now. Another 5000+ files are fixed up, so our overall totals are: Files checked: 64545 Files with SPDX: 45529 Compared to the 5.1 kernel which was: Files checked: 63848 Files with SPDX: 22576 This is a huge improvement. Also, we deleted another 20000 lines of boilerplate license crud, always nice to see in a diffstat" * tag 'spdx-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (65 commits) treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 507 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 506 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 505 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 504 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 503 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 502 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 501 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 499 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 498 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 497 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 496 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 495 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 491 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 490 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 489 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 488 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 487 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 486 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 485 ...
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner1-4/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-14mac80211: do not start any work during reconfigure flowNaftali Goldstein1-0/+4
It is not a good idea to try to perform any work (e.g. send an auth frame) during reconfigure flow. Prevent this from happening, and at the end of the reconfigure flow requeue all the works. Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-05-24{nl,mac}80211: allow 4addr AP operation on crypto controlled devicesManikanta Pubbisetty1-1/+3
As per the current design, in the case of sw crypto controlled devices, it is the device which advertises the support for AP/VLAN iftype based on it's ability to tranmsit packets encrypted in software (In VLAN functionality, group traffic generated for a specific VLAN group is always encrypted in software). Commit db3bdcb9c3ff ("mac80211: allow AP_VLAN operation on crypto controlled devices") has introduced this change. Since 4addr AP operation also uses AP/VLAN iftype, this conditional way of advertising AP/VLAN support has broken 4addr AP mode operation on crypto controlled devices which do not support VLAN functionality. In the case of ath10k driver, not all firmwares have support for VLAN functionality but all can support 4addr AP operation. Because AP/VLAN support is not advertised for these devices, 4addr AP operations are also blocked. Fix this by allowing 4addr operation on devices which do not support AP/VLAN iftype but can support 4addr AP operation (decision is based on the wiphy flag WIPHY_FLAG_4ADDR_AP). Cc: stable@vger.kernel.org Fixes: db3bdcb9c3ff ("mac80211: allow AP_VLAN operation on crypto controlled devices") Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-26cfg80211: don't pass pointer to pointer unnecessarilyDan Carpenter1-4/+4
The cfg80211_merge_profile() and ieee802_11_find_bssid_profile() are a bit cleaner if we just pass the merged_ie pointer instead of a pointer to the pointer. This isn't a functional change, it's just a clean up. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-26mac80211: support profile split between elementsSara Sharon1-19/+37
Since an element is limited to 255 octets, a profile may be split split to several elements. Support the split as defined in the 11ax draft 3. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-28 10:44:59 +0300