summaryrefslogtreecommitdiff
path: root/net/mac80211
AgeCommit message (Collapse)AuthorFilesLines
2022-12-26treewide: Convert del_timer*() to timer_shutdown*()Steven Rostedt (Google)1-1/+1
Due to several bugs caused by timers being re-armed after they are shutdown and just before they are freed, a new state of timers was added called "shutdown". After a timer is set to this state, then it can no longer be re-armed. The following script was run to find all the trivial locations where del_timer() or del_timer_sync() is called in the same function that the object holding the timer is freed. It also ignores any locations where the timer->function is modified between the del_timer*() and the free(), as that is not considered a "trivial" case. This was created by using a coccinelle script and the following commands: $ cat timer.cocci @@ expression ptr, slab; identifier timer, rfield; @@ ( - del_timer(&ptr->timer); + timer_shutdown(&ptr->timer); | - del_timer_sync(&ptr->timer); + timer_shutdown_sync(&ptr->timer); ) ... when strict when != ptr->timer ( kfree_rcu(ptr, rfield); | kmem_cache_free(slab, ptr); | kfree(ptr); ) $ spatch timer.cocci . > /tmp/t.patch $ patch -p1 < /tmp/t.patch Link: https://lore.kernel.org/lkml/20221123201306.823305113@linutronix.de/ Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Acked-by: Pavel Machek <pavel@ucw.cz> [ LED ] Acked-by: Kalle Valo <kvalo@kernel.org> [ wireless ] Acked-by: Paolo Abeni <pabeni@redhat.com> [ networking ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-12-03Merge tag 'wireless-next-2022-12-02' of ↵Jakub Kicinski5-135/+211
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.2 Third set of patches for v6.2. mt76 has a new driver for mt7996 Wi-Fi 7 devices and iwlwifi also got initial Wi-Fi 7 support. Otherwise smaller features and fixes. Major changes: ath10k - store WLAN firmware version in SMEM image table mt76 - mt7996: new driver for MediaTek Wi-Fi 7 (802.11be) devices - mt7986, mt7915: enable Wireless Ethernet Dispatch (WED) offload support - mt7915: add ack signal support - mt7915: enable coredump support - mt7921: remain_on_channel support - mt7921: channel context support iwlwifi - enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities - 320 MHz channels support * tag 'wireless-next-2022-12-02' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (144 commits) wifi: ath10k: fix QCOM_SMEM dependency wifi: mt76: mt7921e: add pci .shutdown() support wifi: mt76: mt7915: mmio: fix naming convention wifi: mt76: mt7996: add support to configure spatial reuse parameter set wifi: mt76: mt7996: enable ack signal support wifi: mt76: mt7996: enable use_cts_prot support wifi: mt76: mt7915: rely on band_idx of mt76_phy wifi: mt76: mt7915: enable per bandwidth power limit support wifi: mt76: mt7915: introduce mt7915_get_power_bound() mt76: mt7915: Fix PCI device refcount leak in mt7915_pci_init_hif2() wifi: mt76: do not send firmware FW_FEATURE_NON_DL region wifi: mt76: mt7921: Add missing __packed annotation of struct mt7921_clc wifi: mt76: fix coverity overrun-call in mt76_get_txpower() wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices wifi: mt76: mt76x0: remove dead code in mt76x0_phy_get_target_power wifi: mt76: mt7915: fix band_idx usage wifi: mt76: mt7915: enable .sta_set_txpwr support wifi: mt76: mt7915: add basedband Txpower info into debugfs wifi: mt76: mt7915: add support to configure spatial reuse parameter set wifi: mt76: mt7915: add missing MODULE_PARM_DESC ... ==================== Link: https://lore.kernel.org/r/20221202214254.D0D3DC433C1@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-01wifi: mac80211: fix and simplify unencrypted drop check for meshFelix Fietkau1-28/+10
ieee80211_drop_unencrypted is called from ieee80211_rx_h_mesh_fwding and ieee80211_frame_allowed. Since ieee80211_rx_h_mesh_fwding can forward packets for other mesh nodes and is called earlier, it needs to check the decryptions status and if the packet is using the control protocol on its own, instead of deferring to the later call from ieee80211_frame_allowed. Because of that, ieee80211_drop_unencrypted has a mesh specific check that skips over the mesh header in order to check the payload protocol. This code is invalid when called from ieee80211_frame_allowed, since that happens after the 802.11->802.3 conversion. Fix this by moving the mesh specific check directly into ieee80211_rx_h_mesh_fwding. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20221201135730.19723-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-12-01wifi: mac80211: add support for restricting netdev features per vifFelix Fietkau2-97/+187
This can be used to selectively disable feature flags for checksum offload, scatter/gather or GSO by changing vif->netdev_features. Removing features from vif->netdev_features does not affect the netdev features themselves, but instead fixes up skbs in the tx path so that the offloads are not needed in the driver. Aside from making it easier to deal with vif type based hardware limitations, this also makes it possible to optimize performance on hardware without native GSO support by declaring GSO support in hw->netdev_features and removing it from vif->netdev_features. This allows mac80211 to handle GSO segmentation after the sta lookup, but before itxq enqueue, thus reducing the number of unnecessary sta lookups, as well as some other per-packet processing. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20221010094338.78070-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-12-01wifi: mac80211: update TIM for S1G specification changesKieran Frewen1-5/+9
Updates to the TIM information element to match changes made in the IEEE Std 802.11ah-2020. Signed-off-by: Kieran Frewen <kieran.frewen@morsemicro.com> Co-developed-by: Gilad Itzkovitch <gilad.itzkovitch@morsemicro.com> Signed-off-by: Gilad Itzkovitch <gilad.itzkovitch@morsemicro.com> Link: https://lore.kernel.org/r/20221106221602.25714-1-gilad.itzkovitch@morsemicro.com [use skb_put_data/skb_put_u8] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-12-01wifi: mac80211: don't parse multi-BSSID in assoc respJohannes Berg1-1/+1
It's not valid to have the multiple BSSID element in the association response (per 802.11 REVme D1.0), so don't try to parse it there, but only in the fallback beacon elements if needed. The other case that was parsing association requests was already changed in a previous commit. Change-Id: I659d2ef1253e079cc71c46a017044e116e31c024 Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-12-01wifi: mac80211: remove unnecessary synchronize_net()Johannes Berg1-2/+1
The call to ieee80211_do_stop() right after will also do synchronize_rcu() to ensure the SDATA_STATE_RUNNING bit is cleared, so we don't need to synchronize_net() here. Change-Id: Id9f9ffcf195002013e5d9fde288877d219780864 Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-12-01wifi: mac80211: Drop not needed check for NULLAlexander Wetzel1-1/+1
ieee80211_get_txq() can only be called with vif != NULL. Remove not needed NULL test in function. Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de> Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Link: https://lore.kernel.org/r/20221107161328.2883-1-alexander@wetzel-home.de Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-12-01wifi: mac80211: fix maybe-unused warningÍñigo Huguet1-1/+1
In ieee80211_lookup_key, the variable named `local` is unused if compiled without lockdep, getting this warning: net/mac80211/cfg.c: In function ‘ieee80211_lookup_key’: net/mac80211/cfg.c:542:26: error: unused variable ‘local’ [-Werror=unused-variable] struct ieee80211_local *local = sdata->local; ^~~~~ Fix it with __maybe_unused. Fixes: 8cbf0c2ab6df ("wifi: mac80211: refactor some key code") Signed-off-by: Íñigo Huguet <ihuguet@redhat.com> Link: https://lore.kernel.org/r/20221111153622.29016-1-ihuguet@redhat.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-12-01wifi: mac80211: fix memory leak in ieee80211_if_add()Zhengchao Shao1-0/+1
When register_netdevice() failed in ieee80211_if_add(), ndev->tstats isn't released. Fix it. Fixes: 5a490510ba5f ("mac80211: use per-CPU TX/RX statistics") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Link: https://lore.kernel.org/r/20221117064500.319983-1-shaozhengchao@huawei.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-11-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+3
tools/lib/bpf/ringbuf.c 927cbb478adf ("libbpf: Handle size overflow for ringbuf mmap") b486d19a0ab0 ("libbpf: checkpatch: Fixed code alignments in ringbuf.c") https://lore.kernel.org/all/20221121122707.44d1446a@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-25wifi: mac8021: fix possible oob access in ieee80211_get_rate_durationLorenzo Bianconi1-0/+3
Fix possible out-of-bound access in ieee80211_get_rate_duration routine as reported by the following UBSAN report: UBSAN: array-index-out-of-bounds in net/mac80211/airtime.c:455:47 index 15 is out of range for type 'u16 [12]' CPU: 2 PID: 217 Comm: kworker/u32:10 Not tainted 6.1.0-060100rc3-generic Hardware name: Acer Aspire TC-281/Aspire TC-281, BIOS R01-A2 07/18/2017 Workqueue: mt76 mt76u_tx_status_data [mt76_usb] Call Trace: <TASK> show_stack+0x4e/0x61 dump_stack_lvl+0x4a/0x6f dump_stack+0x10/0x18 ubsan_epilogue+0x9/0x43 __ubsan_handle_out_of_bounds.cold+0x42/0x47 ieee80211_get_rate_duration.constprop.0+0x22f/0x2a0 [mac80211] ? ieee80211_tx_status_ext+0x32e/0x640 [mac80211] ieee80211_calc_rx_airtime+0xda/0x120 [mac80211] ieee80211_calc_tx_airtime+0xb4/0x100 [mac80211] mt76x02_send_tx_status+0x266/0x480 [mt76x02_lib] mt76x02_tx_status_data+0x52/0x80 [mt76x02_lib] mt76u_tx_status_data+0x67/0xd0 [mt76_usb] process_one_work+0x225/0x400 worker_thread+0x50/0x3e0 ? process_one_work+0x400/0x400 kthread+0xe9/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 Fixes: db3e1c40cf2f ("mac80211: Import airtime calculation code from mt76") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-11-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski4-3/+15
drivers/net/can/pch_can.c ae64438be192 ("can: dev: fix skb drop check") 1dd1b521be85 ("can: remove obsolete PCH CAN driver") https://lore.kernel.org/all/20221110102509.1f7d63cc@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-02wifi: mac80211: Set TWT Information Frame Disabled bit as 1Howard Hsu1-0/+3
The TWT Information Frame Disabled bit of control field of TWT Setup frame shall be set to 1 since handling TWT Information frame is not supported by current mac80211 implementation. Fixes: f5a4c24e689f ("mac80211: introduce individual TWT support in AP mode") Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com> Link: https://lore.kernel.org/r/20221027015653.1448-1-howard-yh.hsu@mediatek.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-11-02wifi: mac80211: Fix ack frame idr leak when mesh has no routeNicolas Cavallari1-1/+1
When trying to transmit an data frame with tx_status to a destination that have no route in the mesh, then it is dropped without recrediting the ack_status_frames idr. Once it is exhausted, wpa_supplicant starts failing to do SAE with NL80211_CMD_FRAME and logs "nl80211: Frame command failed". Use ieee80211_free_txskb() instead of kfree_skb() to fix it. Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr> Link: https://lore.kernel.org/r/20221027140133.1504-1-nicolas.cavallari@green-communications.fr Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-11-02wifi: mac80211: fix general-protection-fault in ieee80211_subif_start_xmit()Zhengchao Shao1-0/+5
When device is running and the interface status is changed, the gpf issue is triggered. The problem triggering process is as follows: Thread A: Thread B ieee80211_runtime_change_iftype() process_one_work() ... ... ieee80211_do_stop() ... ... ... sdata->bss = NULL ... ... ieee80211_subif_start_xmit() ieee80211_multicast_to_unicast //!sdata->bss->multicast_to_unicast cause gpf issue When the interface status is changed, the sending queue continues to send packets. After the bss is set to NULL, the bss is accessed. As a result, this causes a general-protection-fault issue. The following is the stack information: general protection fault, probably for non-canonical address 0xdffffc000000002f: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000178-0x000000000000017f] Workqueue: mld mld_ifc_work RIP: 0010:ieee80211_subif_start_xmit+0x25b/0x1310 Call Trace: <TASK> dev_hard_start_xmit+0x1be/0x990 __dev_queue_xmit+0x2c9a/0x3b60 ip6_finish_output2+0xf92/0x1520 ip6_finish_output+0x6af/0x11e0 ip6_output+0x1ed/0x540 mld_sendpack+0xa09/0xe70 mld_ifc_work+0x71c/0xdb0 process_one_work+0x9bf/0x1710 worker_thread+0x665/0x1080 kthread+0x2e4/0x3a0 ret_from_fork+0x1f/0x30 </TASK> Fixes: f856373e2f31 ("wifi: mac80211: do not wake queues on a vif that is being stopped") Reported-by: syzbot+c6e8fca81c294fd5620a@syzkaller.appspotmail.com Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Link: https://lore.kernel.org/r/20221026063959.177813-1-shaozhengchao@huawei.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-29net: Remove the obsolte u64_stats_fetch_*_irq() users (net).Thomas Gleixner1-4/+4
Now that the 32bit UP oddity is gone and 32bit uses always a sequence count, there is no need for the fetch_irq() variants anymore. Convert to the regular interface. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-29Kalle Valo says:Jakub Kicinski24-366/+644
==================== pull-request: wireless-next-2022-10-28 First set of patches v6.2. mac80211 refactoring continues for Wi-Fi 7. All mac80211 driver are now converted to use internal TX queues, this might cause some regressions so we wanted to do this early in the cycle. Note: wireless tree was merged[1] to wireless-next to avoid some conflicts with mac80211 patches between the trees. Unfortunately there are still two smaller conflicts in net/mac80211/util.c which Stephen also reported[2]. In the first conflict initialise scratch_len to "params->scratch_len ?: 3 * params->len" (note number 3, not 2!) and in the second conflict take the version which uses elems->scratch_pos. [1] https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next.git/commit/?id=dfd2d876b3fda1790bc0239ba4c6967e25d16e91 [2] https://lore.kernel.org/all/20221020032340.5cf101c0@canb.auug.org.au/ mac80211 - preparation for Wi-Fi 7 Multi-Link Operation (MLO) continues - add API to show the link STAs in debugfs - all mac80211 drivers are now using mac80211 internal TX queues (iTXQs) rtw89 - support 8852BE rtl8xxxu - support RTL8188FU brmfmac - support two station interfaces concurrently bcma - support SPROM rev 11 ==================== Link: https://lore.kernel.org/r/20221028132943.304ECC433B5@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-21wifi: mac80211: fix memory free error when registering wiphy failtaozhang1-2/+6
ieee80211_register_hw free the allocated cipher suites when registering wiphy fail, and ieee80211_free_hw will re-free it. set wiphy_ciphers_allocated to false after freeing allocated cipher suites. Signed-off-by: taozhang <taozhang@bestechnic.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-17Merge tag 'random-6.1-rc1-for-linus' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random Pull more random number generator updates from Jason Donenfeld: "This time with some large scale treewide cleanups. The intent of this pull is to clean up the way callers fetch random integers. The current rules for doing this right are: - If you want a secure or an insecure random u64, use get_random_u64() - If you want a secure or an insecure random u32, use get_random_u32() The old function prandom_u32() has been deprecated for a while now and is just a wrapper around get_random_u32(). Same for get_random_int(). - If you want a secure or an insecure random u16, use get_random_u16() - If you want a secure or an insecure random u8, use get_random_u8() - If you want secure or insecure random bytes, use get_random_bytes(). The old function prandom_bytes() has been deprecated for a while now and has long been a wrapper around get_random_bytes() - If you want a non-uniform random u32, u16, or u8 bounded by a certain open interval maximum, use prandom_u32_max() I say "non-uniform", because it doesn't do any rejection sampling or divisions. Hence, it stays within the prandom_*() namespace, not the get_random_*() namespace. I'm currently investigating a "uniform" function for 6.2. We'll see what comes of that. By applying these rules uniformly, we get several benefits: - By using prandom_u32_max() with an upper-bound that the compiler can prove at compile-time is ≤65536 or ≤256, internally get_random_u16() or get_random_u8() is used, which wastes fewer batched random bytes, and hence has higher throughput. - By using prandom_u32_max() instead of %, when the upper-bound is not a constant, division is still avoided, because prandom_u32_max() uses a faster multiplication-based trick instead. - By using get_random_u16() or get_random_u8() in cases where the return value is intended to indeed be a u16 or a u8, we waste fewer batched random bytes, and hence have higher throughput. This series was originally done by hand while I was on an airplane without Internet. Later, Kees and I worked on retroactively figuring out what could be done with Coccinelle and what had to be done manually, and then we split things up based on that. So while this touches a lot of files, the actual amount of code that's hand fiddled is comfortably small" * tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: prandom: remove unused functions treewide: use get_random_bytes() when possible treewide: use get_random_u32() when possible treewide: use get_random_{u8,u16}() when possible, part 2 treewide: use get_random_{u8,u16}() when possible, part 1 treewide: use prandom_u32_max() when possible, part 2 treewide: use prandom_u32_max() when possible, part 1
2022-10-13Merge branch 'cve-fixes-2022-10-13'Johannes Berg3-20/+32
Pull in the fixes for various scan parsing bugs found by Sönke Huster by fuzzing.
2022-10-12treewide: use get_random_bytes() when possibleJason A. Donenfeld1-1/+1
The prandom_bytes() function has been a deprecated inline wrapper around get_random_bytes() for several releases now, and compiles down to the exact same code. Replace the deprecated wrapper with a direct call to the real function. This was done as a basic find and replace. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> # powerpc Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-12treewide: use get_random_{u8,u16}() when possible, part 1Jason A. Donenfeld1-1/+1
Rather than truncate a 32-bit value to a 16-bit value or an 8-bit value, simply use the get_random_{u8,u16}() functions, which are faster than wasting the additional bytes from a 32-bit value. This was done mechanically with this coccinelle script: @@ expression E; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u16; typedef __be16; typedef __le16; typedef u8; @@ ( - (get_random_u32() & 0xffff) + get_random_u16() | - (get_random_u32() & 0xff) + get_random_u8() | - (get_random_u32() % 65536) + get_random_u16() | - (get_random_u32() % 256) + get_random_u8() | - (get_random_u32() >> 16) + get_random_u16() | - (get_random_u32() >> 24) + get_random_u8() | - (u16)get_random_u32() + get_random_u16() | - (u8)get_random_u32() + get_random_u8() | - (__be16)get_random_u32() + (__be16)get_random_u16() | - (__le16)get_random_u32() + (__le16)get_random_u16() | - prandom_u32_max(65536) + get_random_u16() | - prandom_u32_max(256) + get_random_u8() | - E->inet_id = get_random_u32() + E->inet_id = get_random_u16() ) @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u16; identifier v; @@ - u16 v = get_random_u32(); + u16 v = get_random_u16(); @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u8; identifier v; @@ - u8 v = get_random_u32(); + u8 v = get_random_u8(); @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u16; u16 v; @@ - v = get_random_u32(); + v = get_random_u16(); @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u8; u8 v; @@ - v = get_random_u32(); + v = get_random_u8(); // Find a potential literal @literal_mask@ expression LITERAL; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; position p; @@ ((T)get_random_u32()@p & (LITERAL)) // Examine limits @script:python add_one@ literal << literal_mask.LITERAL; RESULT; @@ value = None if literal.startswith('0x'): value = int(literal, 16) elif literal[0] in '123456789': value = int(literal, 10) if value is None: print("I don't know how to handle %s" % (literal)) cocci.include_match(False) elif value < 256: coccinelle.RESULT = cocci.make_ident("get_random_u8") elif value < 65536: coccinelle.RESULT = cocci.make_ident("get_random_u16") else: print("Skipping large mask of %s" % (literal)) cocci.include_match(False) // Replace the literal mask with the calculated result. @plus_one@ expression literal_mask.LITERAL; position literal_mask.p; identifier add_one.RESULT; identifier FUNC; @@ - (FUNC()@p & (LITERAL)) + (RESULT() & LITERAL) Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> # for sch_cake Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-10wifi: mac80211: Drop support for TX push pathAlexander Wetzel14-252/+48
All drivers are now using mac80211 internal queues (iTXQs). Drop mac80211 internal support for the old push path. Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-10Merge remote-tracking branch 'wireless/main' into wireless-nextJohannes Berg5-16/+20
Pull in wireless/main content since some new code would otherwise conflict with it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-10wifi: mac80211: add internal handler for wake_tx_queueAlexander Wetzel1-0/+46
Start to align the TX handling to only use internal TX queues (iTXQs): Provide a handler for drivers not having a custom wake_tx_queue callback and update the documentation. Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-10wifi: mac80211: fix crash in beacon protection for P2P-deviceJohannes Berg1-5/+7
If beacon protection is active but the beacon cannot be decrypted or is otherwise malformed, we call the cfg80211 API to report this to userspace, but that uses a netdev pointer, which isn't present for P2P-Device. Fix this to call it only conditionally to ensure cfg80211 won't crash in the case of P2P-Device. This fixes CVE-2022-42722. Reported-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de> Fixes: 9eaf183af741 ("mac80211: Report beacon protection failures to user space") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-10wifi: mac80211: fix MBSSID parsing use-after-freeJohannes Berg2-15/+23
When we parse a multi-BSSID element, we might point some element pointers into the allocated nontransmitted_profile. However, we free this before returning, causing UAF when the relevant pointers in the parsed elements are accessed. Fix this by not allocating the scratch buffer separately but as part of the returned structure instead, that way, there are no lifetime issues with it. The scratch buffer introduction as part of the returned data here is taken from MLO feature work done by Ilan. This fixes CVE-2022-42719. Fixes: 5023b14cf4df ("mac80211: support profile split between elements") Co-developed-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-10wifi: cfg80211/mac80211: reject bad MBSSID elementsJohannes Berg1-0/+2
Per spec, the maximum value for the MaxBSSID ('n') indicator is 8, and the minimum is 1 since a multiple BSSID set with just one BSSID doesn't make sense (the # of BSSIDs is limited by 2^n). Limit this in the parsing in both cfg80211 and mac80211, rejecting any elements with an invalid value. This fixes potentially bad shifts in the processing of these inside the cfg80211_gen_new_bssid() function later. I found this during the investigation of CVE-2022-41674 fixed by the previous patch. Fixes: 0b8fb8235be8 ("cfg80211: Parsing of Multiple BSSID information in scanning") Fixes: 78ac51f81532 ("mac80211: support multi-bssid") Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-07wifi: mac80211: minstrel_ht: remove unused has_mrr member from struct ↵Peter Seiderer2-4/+0
minstrel_priv Remove unused has_mrr (has multi-rate retry capabilities) member from struct minstrel_priv (only set once in minstrel_ht_alloc, never used again). Signed-off-by: Peter Seiderer <ps.report@gmx.net> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-07wifi: mac80211: fix ifdef symbol nameJohannes Berg1-1/+1
This should of course be CONFIG_, not CPTCFG_, which is an artifact from working with backports. Fixes: 9dd1953846c7 ("wifi: nl80211/mac80211: clarify link ID in control port TX") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-07wifi: mac80211: remove support for AddBA with fragmentationJohannes Berg1-19/+0
HE added support for dynamic fragmentation inside aggregation sessions, but no existing driver ever advertises it. Thus, remove the code for now, it cannot work as-is in MLO. For it to properly work in MLO, we'd need to validate that the frag level is identical across all the link bands/iftypes, which is a good amount of complex code that's just not worth it as long as no driver has support for it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-07wifi: mac80211: agg-rx: avoid band checkJohannes Berg1-1/+1
If the deflink of the station is on 6 GHz, then it won't have HT. If at the same time we're using MLO, then vif.bss_conf isn't used, and thus vif.bss_conf.chandef.chan is NULL, causing the code to crash. Fix this by just checking for both HT and HE, and refusing the aggregation session if both are not present. This might be a bit wrong since it would accept an aggregation session from a peer that has HE but no HT on 2.4 or 5 GHz, but such a peer shouldn't exist in the first place, and it probably supports aggregation if it has HE support. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-07wifi: mac80211: prohibit IEEE80211_HT_CAP_DELAY_BA with MLOJohannes Berg1-0/+10
This won't work right at least with the code as it is, so at least for now just assume it's never set for MLO. It may very well never change, almost no drivers support it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-07wifi: mac80211: don't clear DTIM period after setting itJohannes Berg1-13/+12
Fix the code that sets the DTIM period to always propagate it into link->conf->dtim_period and not overwrite it, while still preferring to set it from the beacon data if available. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-07wifi: mac80211: change AddBA deny error messageJohannes Berg1-1/+1
If the station has no HT, we deny the aggregation session but the error message talks about QoS; change it to say HT instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-07wifi: mac80211: mlme: mark assoc link in outputJohannes Berg1-2/+4
It's useful to know which link was used for the association, mark it when printing the links. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-07wifi: mac80211: check link ID in auth/assoc continuationJohannes Berg2-2/+6
Ensure that the link ID matches in auth/assoc continuation, otherwise we need to reset all the data. Fixes: 81151ce462e5 ("wifi: mac80211: support MLO authentication/association with one link") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-07wifi: mac80211: mlme: fix null-ptr deref on failed assocJohannes Berg1-2/+6
If association to an AP without a link 0 fails, then we crash in tracing because it assumes that either ap_mld_addr or link 0 BSS is valid, since we clear sdata->vif.valid_links and then don't add the ap_mld_addr to the struct. Since we clear also sdata->vif.cfg.ap_addr, keep a local copy of it and assign it earlier, before clearing valid_links, to fix this. Fixes: 81151ce462e5 ("wifi: mac80211: support MLO authentication/association with one link") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-07wifi: mac80211: fix AddBA response addressingJohannes Berg1-1/+1
Since this frame is addressed from/to an MLD, it should be built with the correct AP MLD address (in station mode) to be encrypted properly. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-07wifi: mac80211: set internal scan request BSSIDJohannes Berg1-0/+2
If any driver relies entirely on the scan request BSSID, then that would be wrong for internal scans. Initialize it to the broadcast address since we don't otherwise use the field. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-07wifi: mac80211: advertise TWT requester only with HW supportHaim Dreyfuss1-6/+24
Currently, we rely only on the AP capability. If the AP supports TWT responder we will advertise TWT requester even if the driver or HW doesn't support it. Fix this by checking the HW capability. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-07wifi: mac80211: use link_id in ieee80211_change_bss()Johannes Berg1-19/+21
We should set the parameters here per link, except unfortunately ap_isolate, but we can't really change that anymore so it'll remain a quirk in the API in that you need to change it on one of the valid links and it'll apply to all. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-07wifi: mac80211: transmit AddBA with MLD addressJohannes Berg1-1/+1
This management frame is intended for the MLD so we treat it in mac80211 as MLD addressed as well, and should therefore use the MLD address of the AP for the BSSID field in the frame, address translation applies. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-07wifi: mac80211: wme: use ap_addr instead of deflink BSSIDJohannes Berg1-1/+1
We use this to look up the destination station, so it needs to be the MLD address of the AP for an MLO; use ap_addr instead of the BSSID. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-07wifi: mac80211: Process association status for affiliated linksIlan Peer2-5/+37
In case the AP returned a non success status for one of the links, do not activate the link. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-07wifi: mac80211: Parse station profile from association responseIlan Peer3-6/+187
When processing an association response frame for a Multi-Link connection, extract the per station profile for each additional link, and use it for parsing the link elements. As the Multi-Link element might be fragmented, add support for reassembling a fragmented element. To simplify memory management logic, extend 'struct ieee802_11_elems' to hold a scratch buffer, which is used for the defragmentation. Once an element is reconstructed in the scratch area, point the corresponding element pointer to it. Currently only defragmentation of Multi-Link element and the contained per-STA profile subelement is supported. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-07wifi: mac80211: recalc station aggregate data during link switchJohannes Berg3-9/+43
During link switching, the active links change, so we need to recalculate the aggregate data in the stations. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-07wifi: mac80211: include link address in debugfsBenjamin Berg1-0/+15
Add the link address to the per-link information, but only if we are using MLO. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-07wifi: mac80211: add API to show the link STAs in debugfsBenjamin Berg6-23/+189
Create debugfs data per-link. For drivers, there is a new operation link_sta_add_debugfs which will always be called. For non-MLO, the station directory will be used directly rather than creating a corresponding subdirectory. As such, non-MLO drivers can simply continue to create the data from sta_debugfs_add. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> [add missing inlines if !CONFIG_MAC80211_DEBUGFS] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-31 00:10:14 +0300