summaryrefslogtreecommitdiff
path: root/net/mptcp/pm.c
AgeCommit message (Collapse)AuthorFilesLines
2021-03-13mptcp: add rm_list_rx in mptcp_pm_dataGeliang Tang1-1/+2
This patch added a new member rm_list_rx for struct mptcp_pm_data as an list of the removing address ids on the incoming direction. Initialized its nr field to zero in mptcp_pm_data_init. In mptcp_pm_rm_addr_received, set it as the input rm_list. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-13mptcp: add rm_list in mptcp_options_receivedGeliang Tang1-4/+7
This patch changed the member rm_id in struct mptcp_options_received as a list of the removing address ids, and renamed it to rm_list. In mptcp_parse_option, parsed the RM_ADDR suboption and filled them into the rm_list in struct mptcp_options_received. In mptcp_incoming_options, passed this rm_list to the function mptcp_pm_rm_addr_received. It also changed the parameter type of mptcp_pm_rm_addr_received. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-13mptcp: add rm_list_tx in mptcp_pm_dataGeliang Tang1-8/+12
This patch added a new member rm_list_tx for struct mptcp_pm_data as the removing address list on the outgoing direction. Initialize its nr field to zero in mptcp_pm_data_init. In mptcp_pm_remove_anno_addr, put the single address id into an removing list, and passed it to mptcp_pm_remove_addr. In mptcp_pm_remove_addr, save the input rm_list to rm_list_tx in struct mptcp_pm_data. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-13mptcp: add rm_list in mptcp_out_optionsGeliang Tang1-2/+3
This patch defined a new struct mptcp_rm_list, the ids field was an array of the removing address ids, the nr field was the valid number of removing address ids in the array. The array size was definced as a new macro MPTCP_RM_IDS_MAX. Changed the member rm_id of struct mptcp_out_options to rm_list. In mptcp_established_options_rm_addr, invoked mptcp_pm_rm_addr_signal to get the rm_list. According the number of addresses in it, calculated the padded RM_ADDR suboption length. And saved the ids array in struct mptcp_out_options's rm_list member. In mptcp_write_options, iterated each address id from struct mptcp_out_options's rm_list member, set the invalid ones as TCPOPT_NOP, then filled them into the RM_ADDR suboption. Changed TCPOLEN_MPTCP_RM_ADDR_BASE from 4 to 3. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-13mptcp: add netlink event supportFlorian Westphal1-5/+15
Allow userspace (mptcpd) to subscribe to mptcp genl multicast events. This implementation reuses the same event API as the mptcp kernel fork to ease integration of existing tools, e.g. mptcpd. Supported events include: 1. start and close of an mptcp connection 2. start and close of subflows (joins) 3. announce and withdrawals of addresses 4. subflow priority (backup/non-backup) change. Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-13mptcp: pass subflow socket to a few helpersFlorian Westphal1-2/+2
Pass the first/initial subflow to the existing functions so they can pass this on to the notification handler that is added later in the series. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-07mptcp: pm: add lockdep assertionsFlorian Westphal1-0/+2
Add a few assertions to make sure functions are called with the needed locks held. Two functions gain might_sleep annotations because they contain conditional calls to functions that sleep. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-03mptcp: send ack for every add_addrGeliang Tang1-2/+1
This patch changes the sending ACK conditions for the ADD_ADDR, send an ACK packet for any ADD_ADDR, not just when ipv6 addresses or port numbers are included. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/139 Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-03mptcp: drop *_max fields in mptcp_pm_dataGeliang Tang1-3/+6
This patch drops the per-msk values add_addr_signal_max, add_addr_accept_max, local_addr_max and subflows_max fields in struct mptcp_pm_data, uses the pernet *_max values instead. And adds four new helpers to get the pernet *_max values separately. Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-10mptcp: add the incoming MP_PRIO supportGeliang Tang1-0/+8
This patch added the incoming MP_PRIO logic: Added a flag named mp_prio in struct mptcp_options_received, to mark the MP_PRIO is received, and save the priority value to struct mptcp_options_received's backup member. Then invoke mptcp_pm_mp_prio_received with the receiving subsocket and the backup value. In mptcp_pm_mp_prio_received, get the subflow context according the input subsocket, and change the subflow's backup as the incoming priority value. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-10mptcp: link MPC subflow into msk only after acceptPaolo Abeni1-1/+7
Christoph reported the following splat: WARNING: CPU: 0 PID: 4615 at net/ipv4/inet_connection_sock.c:1031 inet_csk_listen_stop+0x8e8/0xad0 net/ipv4/inet_connection_sock.c:1031 Modules linked in: CPU: 0 PID: 4615 Comm: syz-executor.4 Not tainted 5.9.0 #37 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:inet_csk_listen_stop+0x8e8/0xad0 net/ipv4/inet_connection_sock.c:1031 Code: 03 00 00 00 e8 79 b2 3d ff e9 ad f9 ff ff e8 1f 76 ba fe be 02 00 00 00 4c 89 f7 e8 62 b2 3d ff e9 14 f9 ff ff e8 08 76 ba fe <0f> 0b e9 97 f8 ff ff e8 fc 75 ba fe be 03 00 00 00 4c 89 f7 e8 3f RSP: 0018:ffffc900037f7948 EFLAGS: 00010293 RAX: ffff88810a349c80 RBX: ffff888114ee1b00 RCX: ffffffff827b14cd RDX: 0000000000000000 RSI: ffffffff827b1c38 RDI: 0000000000000005 RBP: ffff88810a2a8000 R08: ffff88810a349c80 R09: fffff520006fef1f R10: 0000000000000003 R11: fffff520006fef1e R12: ffff888114ee2d00 R13: dffffc0000000000 R14: 0000000000000001 R15: ffff888114ee1d68 FS: 00007f2ac1945700(0000) GS:ffff88811b400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffd44798bc0 CR3: 0000000109810002 CR4: 0000000000170ef0 Call Trace: __tcp_close+0xd86/0x1110 net/ipv4/tcp.c:2433 __mptcp_close_ssk+0x256/0x430 net/mptcp/protocol.c:1761 __mptcp_destroy_sock+0x49b/0x770 net/mptcp/protocol.c:2127 mptcp_close+0x62d/0x910 net/mptcp/protocol.c:2184 inet_release+0xe9/0x1f0 net/ipv4/af_inet.c:434 __sock_release+0xd2/0x280 net/socket.c:596 sock_close+0x15/0x20 net/socket.c:1277 __fput+0x276/0x960 fs/file_table.c:281 task_work_run+0x109/0x1d0 kernel/task_work.c:151 get_signal+0xe8f/0x1d40 kernel/signal.c:2561 arch_do_signal+0x88/0x1b60 arch/x86/kernel/signal.c:811 exit_to_user_mode_loop kernel/entry/common.c:161 [inline] exit_to_user_mode_prepare+0x9b/0xf0 kernel/entry/common.c:191 syscall_exit_to_user_mode+0x22/0x150 kernel/entry/common.c:266 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f2ac1254469 Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ff 49 2b 00 f7 d8 64 89 01 48 RSP: 002b:00007f2ac1944dc8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffbf RBX: 000000000069bf00 RCX: 00007f2ac1254469 RDX: 0000000000000000 RSI: 0000000000008982 RDI: 0000000000000003 RBP: 000000000069bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000069bf0c R13: 00007ffeb53f178f R14: 00000000004668b0 R15: 0000000000000003 After commit 0397c6d85f9c ("mptcp: keep unaccepted MPC subflow into join list"), the msk's workqueue and/or PM can touch the MPC subflow - and acquire its socket lock - even if it's still unaccepted. If the above event races with the relevant listener socket close, we can end-up with the above splat. This change addresses the issue delaying the MPC socket insertion in conn_list at accept time - that is, partially reverting the blamed commit. We must additionally ensure that mptcp_pm_fully_established() happens after accept() time, or the PM will not be able to handle properly such event - conn_list could be empty otherwise. In the receive path, we check the subflow list node to ensure it is out of the listener queue. Be sure client subflows do not match transiently such condition moving them into the join list earlier at creation time. Since we now have multiple mptcp_pm_fully_established() call sites from different code-paths, said helper can now race with itself. Use an additional PM status bit to avoid multiple notifications. Reported-by: Christoph Paasch <cpaasch@apple.com> Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/103 Fixes: 0397c6d85f9c ("mptcp: keep unaccepted MPC subflow into join list"), Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-10mptcp: rename add_addr_signal and mptcp_add_addr_statusGeliang Tang1-7/+7
Since the RM_ADDR signal had been reused with add_addr_signal, it's not suitable to call it add_addr_signal or mptcp_add_addr_status. So this patch renamed add_addr_signal to addr_signal, and renamed mptcp_add_addr_status to mptcp_addr_signal_status. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-10mptcp: drop rm_addr_signal flagGeliang Tang1-3/+15
This patch reused add_addr_signal for the RM_ADDR announcing signal, by defining a new ADD_ADDR status named MPTCP_RM_ADDR_SIGNAL. Then the flag rm_addr_signal in PM could be dropped. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-10mptcp: add port parameter for mptcp_pm_announce_addrGeliang Tang1-2/+4
This patch added a new parameter 'port' for mptcp_pm_announce_addr. If this parameter is true, we set the MPTCP_ADD_ADDR_PORT bit of the add_addr_signal. That means the announced address is added with a port number. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-10mptcp: send out dedicated packet for ADD_ADDR using portGeliang Tang1-1/+2
The process is similar to that of the ADD_ADDR IPv6, this patch also sent out a pure ack for the ADD_ADDR using port. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-10mptcp: add the outgoing ADD_ADDR port supportGeliang Tang1-2/+3
This patch added a new add_addr_signal type named MPTCP_ADD_ADDR_PORT, to identify it is an address with port to be added. It also added a new parameter 'port' for both mptcp_add_addr_len and mptcp_pm_add_addr_signal. In mptcp_established_options_add_addr, we check whether the announced address is added with port. If it is, we put this port number to mptcp_out_options's port field. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-11-21mptcp: send out dedicated ADD_ADDR packetGeliang Tang1-2/+14
When ADD_ADDR suboption includes an IPv6 address, the size is 28 octets. It will not fit when other MPTCP suboptions are included in this packet, e.g. DSS. So here we send out an ADD_ADDR dedicated packet to carry only ADD_ADDR suboption, no other MPTCP suboptions. In mptcp_pm_announce_addr, we check whether this is an IPv6 ADD_ADDR. If it is, we set the flag MPTCP_ADD_ADDR_IPV6 to true. Then we call mptcp_pm_nl_add_addr_send_ack to sent out a new pure ACK packet. In mptcp_established_options_add_addr, we check whether this is a pure ACK packet for ADD_ADDR. If it is, we drop all other MPTCP suboptions in this packet, only put ADD_ADDR suboption in it. Suggested-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-21mptcp: change add_addr_signal typeGeliang Tang1-6/+9
This patch changed the 'add_addr_signal' type from bool to char, so that we could encode the addr type there. Suggested-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16mptcp: introduce mptcp_schedule_workPaolo Abeni1-2/+1
remove some of code duplications an allow preventing rescheduling on close. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-04mptcp: ADD_ADDRs with echo bit are smallerMatthieu Baerts1-2/+3
The MPTCP ADD_ADDR suboption with echo-flag=1 has no HMAC, the size is smaller than the one initially sent without echo-flag=1. We then need to use the correct size everywhere when we need this echo bit. Before this patch, the wrong size was reserved but the correct amount of bytes were written (and read): the remaining bytes contained garbage. Fixes: 6a6c05a8b016 ("mptcp: send out ADD_ADDR with echo flag") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/95 Reported-and-tested-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25mptcp: implement mptcp_pm_remove_subflowGeliang Tang1-2/+7
This patch implemented the local subflow removing function, mptcp_pm_remove_subflow, it simply called mptcp_pm_nl_rm_subflow_received under the PM spin lock. We use mptcp_pm_remove_subflow to remove a local subflow, so change it's argument from remote_id to local_id. We check subflow->local_id in mptcp_pm_nl_rm_subflow_received to remove a subflow. Suggested-by: Matthieu Baerts <matthieu.baerts@tessares.net> Suggested-by: Paolo Abeni <pabeni@redhat.com> Suggested-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25mptcp: remove addr and subflow in PM netlinkGeliang Tang1-1/+6
This patch implements the remove announced addr and subflow logic in PM netlink. When the PM netlink removes an address, we traverse all the existing msk sockets to find the relevant sockets. We add a new list named anno_list in mptcp_pm_data, to record all the announced addrs. In the traversing, we check if it has been recorded. If it has been, we trigger the RM_ADDR signal. We also check if this address is in conn_list. If it is, we remove the subflow which using this local address. Since we call mptcp_pm_free_anno_list in mptcp_destroy, we need to move __mptcp_init_sock before the mptcp_is_enabled check in mptcp_init_sock. Suggested-by: Matthieu Baerts <matthieu.baerts@tessares.net> Suggested-by: Paolo Abeni <pabeni@redhat.com> Suggested-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25mptcp: add accept_subflow re-checkGeliang Tang1-4/+6
The re-check of pm->accept_subflow with pm->lock held was missing, this patch fixed it. Suggested-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25mptcp: send out ADD_ADDR with echo flagGeliang Tang1-9/+9
When the ADD_ADDR suboption has been received, we need to send out the same ADD_ADDR suboption with echo-flag=1, and no HMAC. Suggested-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25mptcp: add the incoming RM_ADDR supportGeliang Tang1-0/+12
This patch added the RM_ADDR option parsing logic: We parsed the incoming options to find if the rm_addr option is received, and called mptcp_pm_rm_addr_received to schedule PM work to a new status, named MPTCP_PM_RM_ADDR_RECEIVED. PM work got this status, and called mptcp_pm_nl_rm_addr_received to handle it. In mptcp_pm_nl_rm_addr_received, we closed the subflow matching the rm_id, and updated PM counter. Suggested-by: Matthieu Baerts <matthieu.baerts@tessares.net> Suggested-by: Paolo Abeni <pabeni@redhat.com> Suggested-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25mptcp: add the outgoing RM_ADDR supportGeliang Tang1-0/+25
This patch added a new signal named rm_addr_signal in PM. On outgoing path, we called mptcp_pm_should_rm_signal to check if rm_addr_signal has been set. If it has been, we sent out the RM_ADDR option. Suggested-by: Matthieu Baerts <matthieu.baerts@tessares.net> Suggested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25mptcp: rename addr_signal and the related functionsGeliang Tang1-6/+6
This patch renamed addr_signal and the related functions with the explicit word "add". Suggested-by: Matthieu Baerts <matthieu.baerts@tessares.net> Suggested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-07mptcp: use mptcp worker for path managementFlorian Westphal1-43/+1
We can re-use the existing work queue to handle path management instead of a dedicated work queue. Just move pm_worker to protocol.c, call it from the mptcp worker and get rid of the msk lock (already held). Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-27mptcp: add __init annotation on setup functionsPaolo Abeni1-1/+1
Add the missing annotation in some setup-only functions. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-04mptcp: add some missing pr_fmt definesGeliang Tang1-0/+2
Some of the mptcp logs didn't print out the format string: [ 185.651493] DSS [ 185.651494] data_fin=0 dsn64=0 use_map=0 ack64=1 use_ack=1 [ 185.651494] data_ack=13792750332298763796 [ 185.651495] MPTCP: msk=00000000c4b81cfc ssk=000000009743af53 data_avail=0 skb=0000000063dc595d [ 185.651495] MPTCP: msk=00000000c4b81cfc ssk=000000009743af53 status=0 [ 185.651495] MPTCP: msk ack_seq=9bbc894565aa2f9a subflow ack_seq=9bbc894565aa2f9a [ 185.651496] MPTCP: msk=00000000c4b81cfc ssk=000000009743af53 data_avail=1 skb=0000000012e809e1 So this patch added these missing pr_fmt defines. Then we can get the same format string "MPTCP" in all mptcp logs like this: [ 142.795829] MPTCP: DSS [ 142.795829] MPTCP: data_fin=0 dsn64=0 use_map=0 ack64=1 use_ack=1 [ 142.795829] MPTCP: data_ack=8089704603109242421 [ 142.795830] MPTCP: msk=00000000133a24e0 ssk=000000002e508c64 data_avail=0 skb=00000000d5f230df [ 142.795830] MPTCP: msk=00000000133a24e0 ssk=000000002e508c64 status=0 [ 142.795831] MPTCP: msk ack_seq=66790290f1199d9b subflow ack_seq=66790290f1199d9b [ 142.795831] MPTCP: msk=00000000133a24e0 ssk=000000002e508c64 data_avail=1 skb=00000000de5aca2e Signed-off-by: Geliang Tang <geliangtang@gmail.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30mptcp: add netlink-based PMPaolo Abeni1-1/+8
Expose a new netlink family to userspace to control the PM, setting: - list of local addresses to be signalled. - list of local addresses used to created subflows. - maximum number of add_addr option to react When the msk is fully established, the PM netlink attempts to announce the 'signal' list via the ADD_ADDR option. Since we currently lack the ADD_ADDR echo (and related event) only the first addr is sent. After exhausting the 'announce' list, the PM tries to create subflow for each addr in 'local' list, waiting for each connection to be completed before attempting the next one. Idea is to add an additional PM hook for ADD_ADDR echo, to allow the PM netlink announcing multiple addresses, in sequence. Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30mptcp: Implement path manager interface commandsPeter Krystad1-5/+127
Fill in more path manager functionality by adding a worker function and modifying the related stub functions to schedule the worker. Co-developed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Florian Westphal <fw@strlen.de> Co-developed-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Peter Krystad <peter.krystad@linux.intel.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30mptcp: Add path manager interfacePeter Krystad1-0/+113
Add enough of a path manager interface to allow sending of ADD_ADDR when an incoming MPTCP connection is created. Capable of sending only a single IPv4 ADD_ADDR option. The 'pm_data' element of the connection sock will need to be expanded to handle multiple interfaces and IPv6. Partial processing of the incoming ADD_ADDR is included so the path manager notification of that event happens at the proper time, which involves validating the incoming address information. This is a skeleton interface definition for events generated by MPTCP. Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Co-developed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Florian Westphal <fw@strlen.de> Co-developed-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Co-developed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Peter Krystad <peter.krystad@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-11 04:37:38 +0300