Age | Commit message (Collapse) | Author | Files | Lines |
|
When destroying all sets, we are either in pernet exit phase or
are executing a "destroy all sets command" from userspace. The latter
was taken into account in ip_set_dereference() (nfnetlink mutex is held),
but the former was not. The patch adds the required check to
rcu_dereference_protected() in ip_set_dereference().
Fixes: 4e7aaa6b82d6 ("netfilter: ipset: Fix race between namespace cleanup and gc in the list:set type")
Reported-by: syzbot+b62c37cdd58103293a5a@syzkaller.appspotmail.com
Reported-by: syzbot+cfbe1da5fdfc39efc293@syzkaller.appspotmail.com
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202406141556.e0b6f17e-lkp@intel.com
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Lion Ackermann reported that there is a race condition between namespace cleanup
in ipset and the garbage collection of the list:set type. The namespace
cleanup can destroy the list:set type of sets while the gc of the set type is
waiting to run in rcu cleanup. The latter uses data from the destroyed set which
thus leads use after free. The patch contains the following parts:
- When destroying all sets, first remove the garbage collectors, then wait
if needed and then destroy the sets.
- Fix the badly ordered "wait then remove gc" for the destroy a single set
case.
- Fix the missing rcu locking in the list:set type in the userspace test
case.
- Use proper RCU list handlings in the list:set type.
The patch depends on c1193d9bbbd3 (netfilter: ipset: Add list flush to cancel_gc).
Fixes: 97f7cf1cd80e (netfilter: ipset: fix performance regression in swap operation)
Reported-by: Lion Ackermann <nnamrec@gmail.com>
Tested-by: Lion Ackermann <nnamrec@gmail.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Flushing list in cancel_gc drops references to other lists right away,
without waiting for RCU to destroy list. Fixes race when referenced
ipsets can't be destroyed while referring list is scheduled for destroy.
Fixes: 97f7cf1cd80e ("netfilter: ipset: fix performance regression in swap operation")
Signed-off-by: Alexander Maltsev <keltar.gw@gmail.com>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The patch fdb8e12cc2cc ("netfilter: ipset: fix performance regression
in swap operation") missed to add the calls to gc cancellations
at the error path of create operations and at module unload. Also,
because the half of the destroy operations now executed by a
function registered by call_rcu(), neither NFNL_SUBSYS_IPSET mutex
or rcu read lock is held and therefore the checking of them results
false warnings.
Fixes: 97f7cf1cd80e ("netfilter: ipset: fix performance regression in swap operation")
Reported-by: syzbot+52bbc0ad036f6f0d4a25@syzkaller.appspotmail.com
Reported-by: Brad Spengler <spender@grsecurity.net>
Reported-by: Стас Ничипорович <stasn77@gmail.com>
Tested-by: Brad Spengler <spender@grsecurity.net>
Tested-by: Стас Ничипорович <stasn77@gmail.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The patch "netfilter: ipset: fix race condition between swap/destroy
and kernel side add/del/test", commit 28628fa9 fixes a race condition.
But the synchronize_rcu() added to the swap function unnecessarily slows
it down: it can safely be moved to destroy and use call_rcu() instead.
Eric Dumazet pointed out that simply calling the destroy functions as
rcu callback does not work: sets with timeout use garbage collectors
which need cancelling at destroy which can wait. Therefore the destroy
functions are split into two: cancelling garbage collectors safely at
executing the command received by netlink and moving the remaining
part only into the rcu callback.
Link: https://lore.kernel.org/lkml/C0829B10-EAA6-4809-874E-E1E9C05A8D84@automattic.com/
Fixes: 28628fa952fe ("netfilter: ipset: fix race condition between swap/destroy and kernel side add/del/test")
Reported-by: Ale Crismani <ale.crismani@automattic.com>
Reported-by: David Wang <00107082@163.com>
Tested-by: David Wang <00107082@163.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This is a preparation patch for replacing physindev with physinif on
nf_bridge_info structure. We will use dev_get_by_index_rcu to resolve
device, when needed, and it requires net to be available.
Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
by moving cond_resched_rcu() to rcupdate_wait.h, we can kill another big
sched.h dependency.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
add/del/test
Linkui Xiao reported that there's a race condition when ipset swap and destroy is
called, which can lead to crash in add/del/test element operations. Swap then
destroy are usual operations to replace a set with another one in a production
system. The issue can in some cases be reproduced with the script:
ipset create hash_ip1 hash:net family inet hashsize 1024 maxelem 1048576
ipset add hash_ip1 172.20.0.0/16
ipset add hash_ip1 192.168.0.0/16
iptables -A INPUT -m set --match-set hash_ip1 src -j ACCEPT
while [ 1 ]
do
# ... Ongoing traffic...
ipset create hash_ip2 hash:net family inet hashsize 1024 maxelem 1048576
ipset add hash_ip2 172.20.0.0/16
ipset swap hash_ip1 hash_ip2
ipset destroy hash_ip2
sleep 0.05
done
In the race case the possible order of the operations are
CPU0 CPU1
ip_set_test
ipset swap hash_ip1 hash_ip2
ipset destroy hash_ip2
hash_net_kadt
Swap replaces hash_ip1 with hash_ip2 and then destroy removes hash_ip2 which
is the original hash_ip1. ip_set_test was called on hash_ip1 and because destroy
removed it, hash_net_kadt crashes.
The fix is to force ip_set_swap() to wait for all readers to finish accessing the
old set pointers by calling synchronize_rcu().
The first version of the patch was written by Linkui Xiao <xiaolinkui@kylinos.cn>.
v2: synchronize_rcu() is moved into ip_set_swap() in order not to burden
ip_set_destroy() unnecessarily when all sets are destroyed.
v3: Florian Westphal pointed out that all netfilter hooks run with rcu_read_lock() held
and em_ipset.c wraps the entire ip_set_test() in rcu read lock/unlock pair.
So there's no need to extend the rcu read locked area in ipset itself.
Closes: https://lore.kernel.org/all/69e7963b-e7f8-3ad0-210-7b86eebf7f78@netfilter.org/
Reported by: Linkui Xiao <xiaolinkui@kylinos.cn>
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Kyle Zeng reported that there is a race between IPSET_CMD_ADD and IPSET_CMD_SWAP
in netfilter/ip_set, which can lead to the invocation of `__ip_set_put` on a
wrong `set`, triggering the `BUG_ON(set->ref == 0);` check in it.
The race is caused by using the wrong reference counter, i.e. the ref counter instead
of ref_netlink.
Fixes: 24e227896bbf ("netfilter: ipset: Add schedule point in call_ad().")
Reported-by: Kyle Zeng <zengyhkyle@gmail.com>
Closes: https://lore.kernel.org/netfilter-devel/ZPZqetxOmH+w%2Fmyc@westworld/#r
Tested-by: Kyle Zeng <zengyhkyle@gmail.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
ip_set_hash_netportnet.c
The missing IP_SET_HASH_WITH_NET0 macro in ip_set_hash_netportnet can
lead to the use of wrong `CIDR_POS(c)` for calculating array offsets,
which can lead to integer underflow. As a result, it leads to slab
out-of-bound access.
This patch adds back the IP_SET_HASH_WITH_NET0 macro to
ip_set_hash_netportnet to address the issue.
Fixes: 886503f34d63 ("netfilter: ipset: actually allow allowable CIDR 0 in hash:net,port,net")
Suggested-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Kyle Zeng <zengyhkyle@gmail.com>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Use `strscpy_pad` instead of `strncpy`.
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking changes from Jakub Kicinski:
"WiFi 7 and sendpage changes are the biggest pieces of work for this
release. The latter will definitely require fixes but I think that we
got it to a reasonable point.
Core:
- Rework the sendpage & splice implementations
Instead of feeding data into sockets page by page extend sendmsg
handlers to support taking a reference on the data, controlled by a
new flag called MSG_SPLICE_PAGES
Rework the handling of unexpected-end-of-file to invoke an
additional callback instead of trying to predict what the right
combination of MORE/NOTLAST flags is
Remove the MSG_SENDPAGE_NOTLAST flag completely
- Implement SCM_PIDFD, a new type of CMSG type analogous to
SCM_CREDENTIALS, but it contains pidfd instead of plain pid
- Enable socket busy polling with CONFIG_RT
- Improve reliability and efficiency of reporting for ref_tracker
- Auto-generate a user space C library for various Netlink families
Protocols:
- Allow TCP to shrink the advertised window when necessary, prevent
sk_rcvbuf auto-tuning from growing the window all the way up to
tcp_rmem[2]
- Use per-VMA locking for "page-flipping" TCP receive zerocopy
- Prepare TCP for device-to-device data transfers, by making sure
that payloads are always attached to skbs as page frags
- Make the backoff time for the first N TCP SYN retransmissions
linear. Exponential backoff is unnecessarily conservative
- Create a new MPTCP getsockopt to retrieve all info
(MPTCP_FULL_INFO)
- Avoid waking up applications using TLS sockets until we have a full
record
- Allow using kernel memory for protocol ioctl callbacks, paving the
way to issuing ioctls over io_uring
- Add nolocalbypass option to VxLAN, forcing packets to be fully
encapsulated even if they are destined for a local IP address
- Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure
in-kernel ECMP implementation (e.g. Open vSwitch) select the same
link for all packets. Support L4 symmetric hashing in Open vSwitch
- PPPoE: make number of hash bits configurable
- Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client
(ipconfig)
- Add layer 2 miss indication and filtering, allowing higher layers
(e.g. ACL filters) to make forwarding decisions based on whether
packet matched forwarding state in lower devices (bridge)
- Support matching on Connectivity Fault Management (CFM) packets
- Hide the "link becomes ready" IPv6 messages by demoting their
printk level to debug
- HSR: don't enable promiscuous mode if device offloads the proto
- Support active scanning in IEEE 802.15.4
- Continue work on Multi-Link Operation for WiFi 7
BPF:
- Add precision propagation for subprogs and callbacks. This allows
maintaining verification efficiency when subprograms are used, or
in fact passing the verifier at all for complex programs,
especially those using open-coded iterators
- Improve BPF's {g,s}setsockopt() length handling. Previously BPF
assumed the length is always equal to the amount of written data.
But some protos allow passing a NULL buffer to discover what the
output buffer *should* be, without writing anything
- Accept dynptr memory as memory arguments passed to helpers
- Add routing table ID to bpf_fib_lookup BPF helper
- Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands
- Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark
maps as read-only)
- Show target_{obj,btf}_id in tracing link fdinfo
- Addition of several new kfuncs (most of the names are
self-explanatory):
- Add a set of new dynptr kfuncs: bpf_dynptr_adjust(),
bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size()
and bpf_dynptr_clone().
- bpf_task_under_cgroup()
- bpf_sock_destroy() - force closing sockets
- bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs
Netfilter:
- Relax set/map validation checks in nf_tables. Allow checking
presence of an entry in a map without using the value
- Increase ip_vs_conn_tab_bits range for 64BIT builds
- Allow updating size of a set
- Improve NAT tuple selection when connection is closing
Driver API:
- Integrate netdev with LED subsystem, to allow configuring HW
"offloaded" blinking of LEDs based on link state and activity
(i.e. packets coming in and out)
- Support configuring rate selection pins of SFP modules
- Factor Clause 73 auto-negotiation code out of the drivers, provide
common helper routines
- Add more fool-proof helpers for managing lifetime of MDIO devices
associated with the PCS layer
- Allow drivers to report advanced statistics related to Time Aware
scheduler offload (taprio)
- Allow opting out of VF statistics in link dump, to allow more VFs
to fit into the message
- Split devlink instance and devlink port operations
New hardware / drivers:
- Ethernet:
- Synopsys EMAC4 IP support (stmmac)
- Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches
- Marvell 88E6250 7 port switches
- Microchip LAN8650/1 Rev.B0 PHYs
- MediaTek MT7981/MT7988 built-in 1GE PHY driver
- WiFi:
- Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps
- Realtek RTL8723DS (SDIO variant)
- Realtek RTL8851BE
- CAN:
- Fintek F81604
Drivers:
- Ethernet NICs:
- Intel (100G, ice):
- support dynamic interrupt allocation
- use meta data match instead of VF MAC addr on slow-path
- nVidia/Mellanox:
- extend link aggregation to handle 4, rather than just 2 ports
- spawn sub-functions without any features by default
- OcteonTX2:
- support HTB (Tx scheduling/QoS) offload
- make RSS hash generation configurable
- support selecting Rx queue using TC filters
- Wangxun (ngbe/txgbe):
- add basic Tx/Rx packet offloads
- add phylink support (SFP/PCS control)
- Freescale/NXP (enetc):
- report TAPRIO packet statistics
- Solarflare/AMD:
- support matching on IP ToS and UDP source port of outer
header
- VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6
- add devlink dev info support for EF10
- Virtual NICs:
- Microsoft vNIC:
- size the Rx indirection table based on requested
configuration
- support VLAN tagging
- Amazon vNIC:
- try to reuse Rx buffers if not fully consumed, useful for ARM
servers running with 16kB pages
- Google vNIC:
- support TCP segmentation of >64kB frames
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- enable USXGMII (88E6191X)
- Microchip:
- lan966x: add support for Egress Stage 0 ACL engine
- lan966x: support mapping packet priority to internal switch
priority (based on PCP or DSCP)
- Ethernet PHYs:
- Broadcom PHYs:
- support for Wake-on-LAN for BCM54210E/B50212E
- report LPI counter
- Microsemi PHYs: support RGMII delay configuration (VSC85xx)
- Micrel PHYs: receive timestamp in the frame (LAN8841)
- Realtek PHYs: support optional external PHY clock
- Altera TSE PCS: merge the driver into Lynx PCS which it is a
variant of
- CAN: Kvaser PCIEcan:
- support packet timestamping
- WiFi:
- Intel (iwlwifi):
- major update for new firmware and Multi-Link Operation (MLO)
- configuration rework to drop test devices and split the
different families
- support for segmented PNVM images and power tables
- new vendor entries for PPAG (platform antenna gain) feature
- Qualcomm 802.11ax (ath11k):
- Multiple Basic Service Set Identifier (MBSSID) and Enhanced
MBSSID Advertisement (EMA) support in AP mode
- support factory test mode
- RealTek (rtw89):
- add RSSI based antenna diversity
- support U-NII-4 channels on 5 GHz band
- RealTek (rtl8xxxu):
- AP mode support for 8188f
- support USB RX aggregation for the newer chips"
* tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1602 commits)
net: scm: introduce and use scm_recv_unix helper
af_unix: Skip SCM_PIDFD if scm->pid is NULL.
net: lan743x: Simplify comparison
netlink: Add __sock_i_ino() for __netlink_diag_dump().
net: dsa: avoid suspicious RCU usage for synced VLAN-aware MAC addresses
Revert "af_unix: Call scm_recv() only after scm_set_cred()."
phylink: ReST-ify the phylink_pcs_neg_mode() kdoc
libceph: Partially revert changes to support MSG_SPLICE_PAGES
net: phy: mscc: fix packet loss due to RGMII delays
net: mana: use vmalloc_array and vcalloc
net: enetc: use vmalloc_array and vcalloc
ionic: use vmalloc_array and vcalloc
pds_core: use vmalloc_array and vcalloc
gve: use vmalloc_array and vcalloc
octeon_ep: use vmalloc_array and vcalloc
net: usb: qmi_wwan: add u-blox 0x1312 composition
perf trace: fix MSG_SPLICE_PAGES build error
ipvlan: Fix return value of ipvlan_queue_xmit()
netfilter: nf_tables: fix underflow in chain reference counter
netfilter: nf_tables: unbind non-anonymous set if rule construction fails
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"There are three areas of note:
A bunch of strlcpy()->strscpy() conversions ended up living in my tree
since they were either Acked by maintainers for me to carry, or got
ignored for multiple weeks (and were trivial changes).
The compiler option '-fstrict-flex-arrays=3' has been enabled
globally, and has been in -next for the entire devel cycle. This
changes compiler diagnostics (though mainly just -Warray-bounds which
is disabled) and potential UBSAN_BOUNDS and FORTIFY _warning_
coverage. In other words, there are no new restrictions, just
potentially new warnings. Any new FORTIFY warnings we've seen have
been fixed (usually in their respective subsystem trees). For more
details, see commit df8fc4e934c12b.
The under-development compiler attribute __counted_by has been added
so that we can start annotating flexible array members with their
associated structure member that tracks the count of flexible array
elements at run-time. It is possible (likely?) that the exact syntax
of the attribute will change before it is finalized, but GCC and Clang
are working together to sort it out. Any changes can be made to the
macro while we continue to add annotations.
As an example of that last case, I have a treewide commit waiting with
such annotations found via Coccinelle:
https://git.kernel.org/linus/adc5b3cb48a049563dc673f348eab7b6beba8a9b
Also see commit dd06e72e68bcb4 for more details.
Summary:
- Fix KMSAN vs FORTIFY in strlcpy/strlcat (Alexander Potapenko)
- Convert strreplace() to return string start (Andy Shevchenko)
- Flexible array conversions (Arnd Bergmann, Wyes Karny, Kees Cook)
- Add missing function prototypes seen with W=1 (Arnd Bergmann)
- Fix strscpy() kerndoc typo (Arne Welzel)
- Replace strlcpy() with strscpy() across many subsystems which were
either Acked by respective maintainers or were trivial changes that
went ignored for multiple weeks (Azeem Shaikh)
- Remove unneeded cc-option test for UBSAN_TRAP (Nick Desaulniers)
- Add KUnit tests for strcat()-family
- Enable KUnit tests of FORTIFY wrappers under UML
- Add more complete FORTIFY protections for strlcat()
- Add missed disabling of FORTIFY for all arch purgatories.
- Enable -fstrict-flex-arrays=3 globally
- Tightening UBSAN_BOUNDS when using GCC
- Improve checkpatch to check for strcpy, strncpy, and fake flex
arrays
- Improve use of const variables in FORTIFY
- Add requested struct_size_t() helper for types not pointers
- Add __counted_by macro for annotating flexible array size members"
* tag 'hardening-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (54 commits)
netfilter: ipset: Replace strlcpy with strscpy
uml: Replace strlcpy with strscpy
um: Use HOST_DIR for mrproper
kallsyms: Replace all non-returning strlcpy with strscpy
sh: Replace all non-returning strlcpy with strscpy
of/flattree: Replace all non-returning strlcpy with strscpy
sparc64: Replace all non-returning strlcpy with strscpy
Hexagon: Replace all non-returning strlcpy with strscpy
kobject: Use return value of strreplace()
lib/string_helpers: Change returned value of the strreplace()
jbd2: Avoid printing outside the boundary of the buffer
checkpatch: Check for 0-length and 1-element arrays
riscv/purgatory: Do not use fortified string functions
s390/purgatory: Do not use fortified string functions
x86/purgatory: Do not use fortified string functions
acpi: Replace struct acpi_table_slit 1-element array with flex-array
clocksource: Replace all non-returning strlcpy with strscpy
string: use __builtin_memcpy() in strlcpy/strlcat
staging: most: Replace all non-returning strlcpy with strscpy
drm/i2c: tda998x: Replace all non-returning strlcpy with strscpy
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
1) Allow slightly larger IPVS connection table size from Kconfig for
64-bit arch, from Abhijeet Rastogi.
2) Since IPVS connection table might be larger than 2^20 after previous
patch, allow to limit it depending on the available memory.
Moreover, use kvmalloc. From Julian Anastasov.
3) Do not rebuild VLAN header in nft_payload when matching source and
destination MAC address.
4) Remove nested rcu read lock side in ip_set_test(), from Florian Westphal.
5) Allow to update set size, also from Florian.
6) Improve NAT tuple selection when connection is closing,
from Florian Westphal.
7) Support for resetting set element stateful expression, from Phil Sutter.
8) Use NLA_POLICY_MAX to narrow down maximum attribute value in nf_tables,
from Florian Westphal.
* tag 'nf-next-23-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: nf_tables: limit allowed range via nla_policy
netfilter: nf_tables: Introduce NFT_MSG_GETSETELEM_RESET
netfilter: snat: evict closing tcp entries on reply tuple collision
netfilter: nf_tables: permit update of set size
netfilter: ipset: remove rcu_read_lock_bh pair from ip_set_test
netfilter: nft_payload: rebuild vlan header when needed
ipvs: dynamically limit the connection hash table
ipvs: increase ip_vs_conn_tab_bits range for 64BIT
====================
Link: https://lore.kernel.org/r/20230626064749.75525-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Callers already hold rcu_read_lock.
Prior to RCU conversion this used to be a read_lock_bh(), but now the
bh-disable isn't needed anymore.
Cc: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().
Direct replacement is safe here since return value from all
callers of STRLCPY macro were ignored.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89
Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230613003437.3538694-1-azeemshaikh38@gmail.com
|
|
syzkaller found a repro that causes Hung Task [0] with ipset. The repro
first creates an ipset and then tries to delete a large number of IPs
from the ipset concurrently:
IPSET_ATTR_IPADDR_IPV4 : 172.20.20.187
IPSET_ATTR_CIDR : 2
The first deleting thread hogs a CPU with nfnl_lock(NFNL_SUBSYS_IPSET)
held, and other threads wait for it to be released.
Previously, the same issue existed in set->variant->uadt() that could run
so long under ip_set_lock(set). Commit 5e29dc36bd5e ("netfilter: ipset:
Rework long task execution when adding/deleting entries") tried to fix it,
but the issue still exists in the caller with another mutex.
While adding/deleting many IPs, we should release the CPU periodically to
prevent someone from abusing ipset to hang the system.
Note we need to increment the ipset's refcnt to prevent the ipset from
being destroyed while rescheduling.
[0]:
INFO: task syz-executor174:268 blocked for more than 143 seconds.
Not tainted 6.4.0-rc1-00145-gba79e9a73284 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:syz-executor174 state:D stack:0 pid:268 ppid:260 flags:0x0000000d
Call trace:
__switch_to+0x308/0x714 arch/arm64/kernel/process.c:556
context_switch kernel/sched/core.c:5343 [inline]
__schedule+0xd84/0x1648 kernel/sched/core.c:6669
schedule+0xf0/0x214 kernel/sched/core.c:6745
schedule_preempt_disabled+0x58/0xf0 kernel/sched/core.c:6804
__mutex_lock_common kernel/locking/mutex.c:679 [inline]
__mutex_lock+0x6fc/0xdb0 kernel/locking/mutex.c:747
__mutex_lock_slowpath+0x14/0x20 kernel/locking/mutex.c:1035
mutex_lock+0x98/0xf0 kernel/locking/mutex.c:286
nfnl_lock net/netfilter/nfnetlink.c:98 [inline]
nfnetlink_rcv_msg+0x480/0x70c net/netfilter/nfnetlink.c:295
netlink_rcv_skb+0x1c0/0x350 net/netlink/af_netlink.c:2546
nfnetlink_rcv+0x18c/0x199c net/netfilter/nfnetlink.c:658
netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline]
netlink_unicast+0x664/0x8cc net/netlink/af_netlink.c:1365
netlink_sendmsg+0x6d0/0xa4c net/netlink/af_netlink.c:1913
sock_sendmsg_nosec net/socket.c:724 [inline]
sock_sendmsg net/socket.c:747 [inline]
____sys_sendmsg+0x4b8/0x810 net/socket.c:2503
___sys_sendmsg net/socket.c:2557 [inline]
__sys_sendmsg+0x1f8/0x2a4 net/socket.c:2586
__do_sys_sendmsg net/socket.c:2595 [inline]
__se_sys_sendmsg net/socket.c:2593 [inline]
__arm64_sys_sendmsg+0x80/0x94 net/socket.c:2593
__invoke_syscall arch/arm64/kernel/syscall.c:38 [inline]
invoke_syscall+0x84/0x270 arch/arm64/kernel/syscall.c:52
el0_svc_common+0x134/0x24c arch/arm64/kernel/syscall.c:142
do_el0_svc+0x64/0x198 arch/arm64/kernel/syscall.c:193
el0_svc+0x2c/0x7c arch/arm64/kernel/entry-common.c:637
el0t_64_sync_handler+0x84/0xf0 arch/arm64/kernel/entry-common.c:655
el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591
Reported-by: syzkaller <syzkaller@googlegroups.com>
Fixes: a7b4f989a629 ("netfilter: ipset: IP set core support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Fix spelling in net/ Kconfig files.
(reported by codespell)
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Jozsef Kadlecsik <kadlec@netfilter.org>
Cc: Florian Westphal <fw@strlen.de>
Cc: coreteam@netfilter.org
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Link: https://lore.kernel.org/r/20230124181724.18166-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When first_ip is 0, last_ip is 0xFFFFFFFF, and netmask is 31, the value of
an arithmetic expression 2 << (netmask - mask_bits - 1) is subject
to overflow due to a failure casting operands to a larger data type
before performing the arithmetic.
Note that it's harmless since the value will be checked at the next step.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.
Fixes: b9fed748185a ("netfilter: ipset: Check and reject crazy /0 input parameters")
Signed-off-by: Ilia.Gavrilov <Ilia.Gavrilov@infotecs.ru>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, wifi, and netfilter.
Current release - regressions:
- bpf: fix nullness propagation for reg to reg comparisons, avoid
null-deref
- inet: control sockets should not use current thread task_frag
- bpf: always use maximal size for copy_array()
- eth: bnxt_en: don't link netdev to a devlink port for VFs
Current release - new code bugs:
- rxrpc: fix a couple of potential use-after-frees
- netfilter: conntrack: fix IPv6 exthdr error check
- wifi: iwlwifi: fw: skip PPAG for JF, avoid FW crashes
- eth: dsa: qca8k: various fixes for the in-band register access
- eth: nfp: fix schedule in atomic context when sync mc address
- eth: renesas: rswitch: fix getting mac address from device tree
- mobile: ipa: use proper endpoint mask for suspend
Previous releases - regressions:
- tcp: add TIME_WAIT sockets in bhash2, fix regression caught by
Jiri / python tests
- net: tc: don't intepret cls results when asked to drop, fix
oob-access
- vrf: determine the dst using the original ifindex for multicast
- eth: bnxt_en:
- fix XDP RX path if BPF adjusted packet length
- fix HDS (header placement) and jumbo thresholds for RX packets
- eth: ice: xsk: do not use xdp_return_frame() on tx_buf->raw_buf,
avoid memory corruptions
Previous releases - always broken:
- ulp: prevent ULP without clone op from entering the LISTEN status
- veth: fix race with AF_XDP exposing old or uninitialized
descriptors
- bpf:
- pull before calling skb_postpull_rcsum() (fix checksum support
and avoid a WARN())
- fix panic due to wrong pageattr of im->image (when livepatch and
kretfunc coexist)
- keep a reference to the mm, in case the task is dead
- mptcp: fix deadlock in fastopen error path
- netfilter:
- nf_tables: perform type checking for existing sets
- nf_tables: honor set timeout and garbage collection updates
- ipset: fix hash:net,port,net hang with /0 subnet
- ipset: avoid hung task warning when adding/deleting entries
- selftests: net:
- fix cmsg_so_mark.sh test hang on non-x86 systems
- fix the arp_ndisc_evict_nocarrier test for IPv6
- usb: rndis_host: secure rndis_query check against int overflow
- eth: r8169: fix dmar pte write access during suspend/resume with
WOL
- eth: lan966x: fix configuration of the PCS
- eth: sparx5: fix reading of the MAC address
- eth: qed: allow sleep in qed_mcp_trace_dump()
- eth: hns3:
- fix interrupts re-initialization after VF FLR
- fix handling of promisc when MAC addr table gets full
- refine the handling for VF heartbeat
- eth: mlx5:
- properly handle ingress QinQ-tagged packets on VST
- fix io_eq_size and event_eq_size params validation on big endian
- fix RoCE setting at HCA level if not supported at all
- don't turn CQE compression on by default for IPoIB
- eth: ena:
- fix toeplitz initial hash key value
- account for the number of XDP-processed bytes in interface stats
- fix rx_copybreak value update
Misc:
- ethtool: harden phy stat handling against buggy drivers
- docs: netdev: convert maintainer's doc from FAQ to a normal
document"
* tag 'net-6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (112 commits)
caif: fix memory leak in cfctrl_linkup_request()
inet: control sockets should not use current thread task_frag
net/ulp: prevent ULP without clone op from entering the LISTEN status
qed: allow sleep in qed_mcp_trace_dump()
MAINTAINERS: Update maintainers for ptp_vmw driver
usb: rndis_host: Secure rndis_query check against int overflow
net: dpaa: Fix dtsec check for PCS availability
octeontx2-pf: Fix lmtst ID used in aura free
drivers/net/bonding/bond_3ad: return when there's no aggregator
netfilter: ipset: Rework long task execution when adding/deleting entries
netfilter: ipset: fix hash:net,port,net hang with /0 subnet
net: sparx5: Fix reading of the MAC address
vxlan: Fix memory leaks in error path
net: sched: htb: fix htb_classify() kernel-doc
net: sched: cbq: dont intepret cls results when asked to drop
net: sched: atm: dont intepret cls results when asked to drop
dt-bindings: net: marvell,orion-mdio: Fix examples
dt-bindings: net: sun8i-emac: Add phy-supply property
net: ipa: use proper endpoint mask for suspend
selftests: net: return non-zero for failures reported in arp_ndisc_evict_nocarrier
...
|
|
When adding/deleting large number of elements in one step in ipset, it can
take a reasonable amount of time and can result in soft lockup errors. The
patch 5f7b51bf09ba ("netfilter: ipset: Limit the maximal range of
consecutive elements to add/delete") tried to fix it by limiting the max
elements to process at all. However it was not enough, it is still possible
that we get hung tasks. Lowering the limit is not reasonable, so the
approach in this patch is as follows: rely on the method used at resizing
sets and save the state when we reach a smaller internal batch limit,
unlock/lock and proceed from the saved state. Thus we can avoid long
continuous tasks and at the same time removed the limit to add/delete large
number of elements in one step.
The nfnl mutex is held during the whole operation which prevents one to
issue other ipset commands in parallel.
Fixes: 5f7b51bf09ba ("netfilter: ipset: Limit the maximal range of consecutive elements to add/delete")
Reported-by: syzbot+9204e7399656300bf271@syzkaller.appspotmail.com
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The hash:net,port,net set type supports /0 subnets. However, the patch
commit 5f7b51bf09baca8e titled "netfilter: ipset: Limit the maximal range
of consecutive elements to add/delete" did not take into account it and
resulted in an endless loop. The bug is actually older but the patch
5f7b51bf09baca8e brings it out earlier.
Handle /0 subnets properly in hash:net,port,net set types.
Fixes: 5f7b51bf09ba ("netfilter: ipset: Limit the maximal range of consecutive elements to add/delete")
Reported-by: Марк Коренберг <socketpair@gmail.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Due to several bugs caused by timers being re-armed after they are
shutdown and just before they are freed, a new state of timers was added
called "shutdown". After a timer is set to this state, then it can no
longer be re-armed.
The following script was run to find all the trivial locations where
del_timer() or del_timer_sync() is called in the same function that the
object holding the timer is freed. It also ignores any locations where
the timer->function is modified between the del_timer*() and the free(),
as that is not considered a "trivial" case.
This was created by using a coccinelle script and the following
commands:
$ cat timer.cocci
@@
expression ptr, slab;
identifier timer, rfield;
@@
(
- del_timer(&ptr->timer);
+ timer_shutdown(&ptr->timer);
|
- del_timer_sync(&ptr->timer);
+ timer_shutdown_sync(&ptr->timer);
)
... when strict
when != ptr->timer
(
kfree_rcu(ptr, rfield);
|
kmem_cache_free(slab, ptr);
|
kfree(ptr);
)
$ spatch timer.cocci . > /tmp/t.patch
$ patch -p1 < /tmp/t.patch
Link: https://lore.kernel.org/lkml/20221123201306.823305113@linutronix.de/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Pavel Machek <pavel@ucw.cz> [ LED ]
Acked-by: Kalle Valo <kvalo@kernel.org> [ wireless ]
Acked-by: Paolo Abeni <pabeni@redhat.com> [ networking ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
1) Incorrect error check in nft_expr_inner_parse(), from Dan Carpenter.
2) Add DATA_SENT state to SCTP connection tracking helper, from
Sriram Yagnaraman.
3) Consolidate nf_confirm for ipv4 and ipv6, from Florian Westphal.
4) Add bitmask support for ipset, from Vishwanath Pai.
5) Handle icmpv6 redirects as RELATED, from Florian Westphal.
6) Add WARN_ON_ONCE() to impossible case in flowtable datapath,
from Li Qiong.
7) A large batch of IPVS updates to replace timer-based estimators by
kthreads to scale up wrt. CPUs and workload (millions of estimators).
Julian Anastasov says:
This patchset implements stats estimation in kthread context.
It replaces the code that runs on single CPU in timer context every 2
seconds and causing latency splats as shown in reports [1], [2], [3].
The solution targets setups with thousands of IPVS services,
destinations and multi-CPU boxes.
Spread the estimation on multiple (configured) CPUs and multiple
time slots (timer ticks) by using multiple chains organized under RCU
rules. When stats are not needed, it is recommended to use
run_estimation=0 as already implemented before this change.
RCU Locking:
- As stats are now RCU-locked, tot_stats, svc and dest which
hold estimator structures are now always freed from RCU
callback. This ensures RCU grace period after the
ip_vs_stop_estimator() call.
Kthread data:
- every kthread works over its own data structure and all
such structures are attached to array. For now we limit
kthreads depending on the number of CPUs.
- even while there can be a kthread structure, its task
may not be running, eg. before first service is added or
while the sysctl var is set to an empty cpulist or
when run_estimation is set to 0 to disable the estimation.
- the allocated kthread context may grow from 1 to 50
allocated structures for timer ticks which saves memory for
setups with small number of estimators
- a task and its structure may be released if all
estimators are unlinked from its chains, leaving the
slot in the array empty
- every kthread data structure allows limited number
of estimators. Kthread 0 is also used to initially
calculate the max number of estimators to allow in every
chain considering a sub-100 microsecond cond_resched
rate. This number can be from 1 to hundreds.
- kthread 0 has an additional job of optimizing the
adding of estimators: they are first added in
temp list (est_temp_list) and later kthread 0
distributes them to other kthreads. The optimization
is based on the fact that newly added estimator
should be estimated after 2 seconds, so we have the
time to offload the adding to chain from controlling
process to kthread 0.
- to add new estimators we use the last added kthread
context (est_add_ktid). The new estimators are linked to
the chains just before the estimated one, based on add_row.
This ensures their estimation will start after 2 seconds.
If estimators are added in bursts, common case if all
services and dests are initially configured, we may
spread the estimators to more chains and as result,
reducing the initial delay below 2 seconds.
Many thanks to Jiri Wiesner for his valuable comments
and for spending a lot of time reviewing and testing
the changes on different platforms with 48-256 CPUs and
1-8 NUMA nodes under different cpufreq governors.
The new IPVS estimators do not use workqueue infrastructure
because:
- The estimation can take long time when using multiple IPVS rules (eg.
millions estimator structures) and especially when box has multiple
CPUs due to the for_each_possible_cpu usage that expects packets from
any CPU. With est_nice sysctl we have more control how to prioritize the
estimation kthreads compared to other processes/kthreads that have
latency requirements (such as servers). As a benefit, we can see these
kthreads in top and decide if we will need some further control to limit
their CPU usage (max number of structure to estimate per kthread).
- with kthreads we run code that is read-mostly, no write/lock
operations to process the estimators in 2-second intervals.
- work items are one-shot: as estimators are processed every
2 seconds, they need to be re-added every time. This again
loads the timers (add_timer) if we use delayed works, as there are
no kthreads to do the timings.
[1] Report from Yunhong Jiang:
https://lore.kernel.org/netdev/D25792C1-1B89-45DE-9F10-EC350DC04ADC@gmail.com/
[2] https://marc.info/?l=linux-virtual-server&m=159679809118027&w=2
[3] Report from Dust:
https://archive.linuxvirtualserver.org/html/lvs-devel/2020-12/msg00000.html
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
ipvs: run_estimation should control the kthread tasks
ipvs: add est_cpulist and est_nice sysctl vars
ipvs: use kthreads for stats estimation
ipvs: use u64_stats_t for the per-cpu counters
ipvs: use common functions for stats allocation
ipvs: add rcu protection to stats
netfilter: flowtable: add a 'default' case to flowtable datapath
netfilter: conntrack: set icmpv6 redirects as RELATED
netfilter: ipset: Add support for new bitmask parameter
netfilter: conntrack: merge ipv4+ipv6 confirm functions
netfilter: conntrack: add sctp DATA_SENT state
netfilter: nft_inner: fix IS_ERR() vs NULL check
====================
Link: https://lore.kernel.org/r/20221211101204.1751-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a new parameter to complement the existing 'netmask' option. The
main difference between netmask and bitmask is that bitmask takes any
arbitrary ip address as input, it does not have to be a valid netmask.
The name of the new parameter is 'bitmask'. This lets us mask out
arbitrary bits in the ip address, for example:
ipset create set1 hash:ip bitmask 255.128.255.0
ipset create set2 hash:ip,port family inet6 bitmask ffff::ff80
Signed-off-by: Vishwanath Pai <vpai@akamai.com>
Signed-off-by: Joshua Hunt <johunt@akamai.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The commit 510841da1fcc ("netfilter: ipset: enforce documented limit to
prevent allocating huge memory") was too strict and prevented to add up to
64 clashing elements to a hash:net,iface type of set. This patch fixes the
issue and now the type behaves as documented.
Fixes: 510841da1fcc ("netfilter: ipset: enforce documented limit to prevent allocating huge memory")
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This patch introduced a regression: commit 48596a8ddc46 ("netfilter:
ipset: Fix adding an IPv4 range containing more than 2^31 addresses")
The variable e.ip is passed to adtfn() function which finally adds the
ip address to the set. The patch above refactored the for loop and moved
e.ip = htonl(ip) to the end of the for loop.
What this means is that if the value of "ip" changes between the first
assignement of e.ip and the forloop, then e.ip is pointing to a
different ip address than "ip".
Test case:
$ ipset create jdtest_tmp hash:ip family inet hashsize 2048 maxelem 100000
$ ipset add jdtest_tmp 10.0.1.1/31
ipset v6.21.1: Element cannot be added to the set: it's already added
The value of ip gets updated inside the "else if (tb[IPSET_ATTR_CIDR])"
block but e.ip is still pointing to the old value.
Fixes: 48596a8ddc46 ("netfilter: ipset: Fix adding an IPv4 range containing more than 2^31 addresses")
Reviewed-by: Joshua Hunt <johunt@akamai.com>
Signed-off-by: Vishwanath Pai <vpai@akamai.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Daniel Xu reported that the hash:net,iface type of the ipset subsystem does
not limit adding the same network with different interfaces to a set, which
can lead to huge memory usage or allocation failure.
The quick reproducer is
$ ipset create ACL.IN.ALL_PERMIT hash:net,iface hashsize 1048576 timeout 0
$ for i in $(seq 0 100); do /sbin/ipset add ACL.IN.ALL_PERMIT 0.0.0.0/0,kaf_$i timeout 0 -exist; done
The backtrace when vmalloc fails:
[Tue Oct 25 00:13:08 2022] ipset: vmalloc error: size 1073741848, exceeds total pages
<...>
[Tue Oct 25 00:13:08 2022] Call Trace:
[Tue Oct 25 00:13:08 2022] <TASK>
[Tue Oct 25 00:13:08 2022] dump_stack_lvl+0x48/0x60
[Tue Oct 25 00:13:08 2022] warn_alloc+0x155/0x180
[Tue Oct 25 00:13:08 2022] __vmalloc_node_range+0x72a/0x760
[Tue Oct 25 00:13:08 2022] ? hash_netiface4_add+0x7c0/0xb20
[Tue Oct 25 00:13:08 2022] ? __kmalloc_large_node+0x4a/0x90
[Tue Oct 25 00:13:08 2022] kvmalloc_node+0xa6/0xd0
[Tue Oct 25 00:13:08 2022] ? hash_netiface4_resize+0x99/0x710
<...>
The fix is to enforce the limit documented in the ipset(8) manpage:
> The internal restriction of the hash:net,iface set type is that the same
> network prefix cannot be stored with more than 64 different interfaces
> in a single set.
Fixes: ccf0a4b7fc68 ("netfilter: ipset: Add bucketsize parameter to all hash types")
Reported-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
In preparation for FORTIFY_SOURCE doing bounds-check on memcpy(),
switch from __nlmsg_put to nlmsg_put(), and explain the bounds check
for dealing with the memcpy() across a composite flexible array struct.
Avoids this future run-time warning:
memcpy: detected field-spanning write (size 32) of single field "&errmsg->msg" at net/netlink/af_netlink.c:2447 (size 16)
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Jozsef Kadlecsik <kadlec@netfilter.org>
Cc: Florian Westphal <fw@strlen.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: syzbot <syzkaller@googlegroups.com>
Cc: netfilter-devel@vger.kernel.org
Cc: coreteam@netfilter.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220901071336.1418572-1-keescook@chromium.org
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The commit
commit 7661809d493b426e979f39ab512e3adf41fbcc69
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date: Wed Jul 14 09:45:49 2021 -0700
mm: don't allow oversized kvmalloc() calls
limits the max allocatable memory via kvmalloc() to MAX_INT. Apply the
same limit in ipset.
Reported-by: syzbot+3493b1873fb3ea827986@syzkaller.appspotmail.com
Reported-by: syzbot+2b8443c35458a617c904@syzkaller.appspotmail.com
Reported-by: syzbot+ee5cb15f4a0e85e0d54e@syzkaller.appspotmail.com
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The range size of consecutive elements were not limited. Thus one could
define a huge range which may result soft lockup errors due to the long
execution time. Now the range size is limited to 2^20 entries.
Reported-by: Brad Spengler <spender@grsecurity.net>
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Replace netlink_unicast() calls by nfnetlink_unicast() which already
deals with translating EAGAIN to ENOBUFS as the nfnetlink core expects.
nfnetlink_unicast() calls nlmsg_unicast() which returns zero in case of
success, otherwise the netlink core function netlink_rcv_skb() turns
err > 0 into an acknowlegment.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add enum nfnl_callback_type to identify the callback type to provide one
single callback.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add a new structure to reduce callback footprint and to facilite
extensions of the nfnetlink callback interface in the future.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This patch adds a helper function to set up the netlink and nfnetlink headers.
Update existing codebase to use it.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
htable_bits() can call jhash_size(32) and trigger shift-out-of-bounds
UBSAN: shift-out-of-bounds in net/netfilter/ipset/ip_set_hash_gen.h:151:6
shift exponent 32 is too large for 32-bit type 'unsigned int'
CPU: 0 PID: 8498 Comm: syz-executor519
Not tainted 5.10.0-rc7-next-20201208-syzkaller #0
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x107/0x163 lib/dump_stack.c:120
ubsan_epilogue+0xb/0x5a lib/ubsan.c:148
__ubsan_handle_shift_out_of_bounds.cold+0xb1/0x181 lib/ubsan.c:395
htable_bits net/netfilter/ipset/ip_set_hash_gen.h:151 [inline]
hash_mac_create.cold+0x58/0x9b net/netfilter/ipset/ip_set_hash_gen.h:1524
ip_set_create+0x610/0x1380 net/netfilter/ipset/ip_set_core.c:1115
nfnetlink_rcv_msg+0xecc/0x1180 net/netfilter/nfnetlink.c:252
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2494
nfnetlink_rcv+0x1ac/0x420 net/netfilter/nfnetlink.c:600
netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline]
netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1330
netlink_sendmsg+0x907/0xe40 net/netlink/af_netlink.c:1919
sock_sendmsg_nosec net/socket.c:652 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:672
____sys_sendmsg+0x6e8/0x810 net/socket.c:2345
___sys_sendmsg+0xf3/0x170 net/socket.c:2399
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2432
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
This patch replaces htable_bits() by simple fls(hashsize - 1) call:
it alone returns valid nbits both for round and non-round hashsizes.
It is normal to set any nbits here because it is validated inside
following htable_size() call which returns 0 for nbits>31.
Fixes: 1feab10d7e6d("netfilter: ipset: Unified hash type generation")
Reported-by: syzbot+d66bfadebca46cf61a2b@syzkaller.appspotmail.com
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
currently mtype_resize() can cause oops
t = ip_set_alloc(htable_size(htable_bits));
if (!t) {
ret = -ENOMEM;
goto out;
}
t->hregion = ip_set_alloc(ahash_sizeof_regions(htable_bits));
Increased htable_bits can force htable_size() to return 0.
In own turn ip_set_alloc(0) returns not 0 but ZERO_SIZE_PTR,
so follwoing access to t->hregion should trigger an OOPS.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Conflicts:
drivers/net/ethernet/ibm/ibmvnic.c
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot found that we are not validating user input properly
before copying 16 bytes [1].
Using NLA_BINARY in ipaddr_policy[] for IPv6 address is not correct,
since it ensures at most 16 bytes were provided.
We should instead make sure user provided exactly 16 bytes.
In old kernels (before v4.20), fix would be to remove the NLA_BINARY,
since NLA_POLICY_EXACT_LEN() was not yet available.
[1]
BUG: KMSAN: uninit-value in hash_ip6_add+0x1cba/0x3a50 net/netfilter/ipset/ip_set_hash_gen.h:892
CPU: 1 PID: 11611 Comm: syz-executor.0 Not tainted 5.10.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x21c/0x280 lib/dump_stack.c:118
kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118
__msan_warning+0x5f/0xa0 mm/kmsan/kmsan_instr.c:197
hash_ip6_add+0x1cba/0x3a50 net/netfilter/ipset/ip_set_hash_gen.h:892
hash_ip6_uadt+0x976/0xbd0 net/netfilter/ipset/ip_set_hash_ip.c:267
call_ad+0x329/0xd00 net/netfilter/ipset/ip_set_core.c:1720
ip_set_ad+0x111f/0x1440 net/netfilter/ipset/ip_set_core.c:1808
ip_set_uadd+0xf6/0x110 net/netfilter/ipset/ip_set_core.c:1833
nfnetlink_rcv_msg+0xc7d/0xdf0 net/netfilter/nfnetlink.c:252
netlink_rcv_skb+0x70a/0x820 net/netlink/af_netlink.c:2494
nfnetlink_rcv+0x4f0/0x4380 net/netfilter/nfnetlink.c:600
netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline]
netlink_unicast+0x11da/0x14b0 net/netlink/af_netlink.c:1330
netlink_sendmsg+0x173c/0x1840 net/netlink/af_netlink.c:1919
sock_sendmsg_nosec net/socket.c:651 [inline]
sock_sendmsg net/socket.c:671 [inline]
____sys_sendmsg+0xc7a/0x1240 net/socket.c:2353
___sys_sendmsg net/socket.c:2407 [inline]
__sys_sendmsg+0x6d5/0x830 net/socket.c:2440
__do_sys_sendmsg net/socket.c:2449 [inline]
__se_sys_sendmsg+0x97/0xb0 net/socket.c:2447
__x64_sys_sendmsg+0x4a/0x70 net/socket.c:2447
do_syscall_64+0x9f/0x140 arch/x86/entry/common.c:48
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x45deb9
Code: 0d b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 db b3 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fe2e503fc78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000029ec0 RCX: 000000000045deb9
RDX: 0000000000000000 RSI: 0000000020000140 RDI: 0000000000000003
RBP: 000000000118bf60 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000118bf2c
R13: 000000000169fb7f R14: 00007fe2e50409c0 R15: 000000000118bf2c
Uninit was stored to memory at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:121 [inline]
kmsan_internal_chain_origin+0xad/0x130 mm/kmsan/kmsan.c:289
__msan_chain_origin+0x57/0xa0 mm/kmsan/kmsan_instr.c:147
ip6_netmask include/linux/netfilter/ipset/pfxlen.h:49 [inline]
hash_ip6_netmask net/netfilter/ipset/ip_set_hash_ip.c:185 [inline]
hash_ip6_uadt+0xb1c/0xbd0 net/netfilter/ipset/ip_set_hash_ip.c:263
call_ad+0x329/0xd00 net/netfilter/ipset/ip_set_core.c:1720
ip_set_ad+0x111f/0x1440 net/netfilter/ipset/ip_set_core.c:1808
ip_set_uadd+0xf6/0x110 net/netfilter/ipset/ip_set_core.c:1833
nfnetlink_rcv_msg+0xc7d/0xdf0 net/netfilter/nfnetlink.c:252
netlink_rcv_skb+0x70a/0x820 net/netlink/af_netlink.c:2494
nfnetlink_rcv+0x4f0/0x4380 net/netfilter/nfnetlink.c:600
netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline]
netlink_unicast+0x11da/0x14b0 net/netlink/af_netlink.c:1330
netlink_sendmsg+0x173c/0x1840 net/netlink/af_netlink.c:1919
sock_sendmsg_nosec net/socket.c:651 [inline]
sock_sendmsg net/socket.c:671 [inline]
____sys_sendmsg+0xc7a/0x1240 net/socket.c:2353
___sys_sendmsg net/socket.c:2407 [inline]
__sys_sendmsg+0x6d5/0x830 net/socket.c:2440
__do_sys_sendmsg net/socket.c:2449 [inline]
__se_sys_sendmsg+0x97/0xb0 net/socket.c:2447
__x64_sys_sendmsg+0x4a/0x70 net/socket.c:2447
do_syscall_64+0x9f/0x140 arch/x86/entry/common.c:48
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Uninit was stored to memory at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:121 [inline]
kmsan_internal_chain_origin+0xad/0x130 mm/kmsan/kmsan.c:289
kmsan_memcpy_memmove_metadata+0x25e/0x2d0 mm/kmsan/kmsan.c:226
kmsan_memcpy_metadata+0xb/0x10 mm/kmsan/kmsan.c:246
__msan_memcpy+0x46/0x60 mm/kmsan/kmsan_instr.c:110
ip_set_get_ipaddr6+0x2cb/0x370 net/netfilter/ipset/ip_set_core.c:310
hash_ip6_uadt+0x439/0xbd0 net/netfilter/ipset/ip_set_hash_ip.c:255
call_ad+0x329/0xd00 net/netfilter/ipset/ip_set_core.c:1720
ip_set_ad+0x111f/0x1440 net/netfilter/ipset/ip_set_core.c:1808
ip_set_uadd+0xf6/0x110 net/netfilter/ipset/ip_set_core.c:1833
nfnetlink_rcv_msg+0xc7d/0xdf0 net/netfilter/nfnetlink.c:252
netlink_rcv_skb+0x70a/0x820 net/netlink/af_netlink.c:2494
nfnetlink_rcv+0x4f0/0x4380 net/netfilter/nfnetlink.c:600
netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline]
netlink_unicast+0x11da/0x14b0 net/netlink/af_netlink.c:1330
netlink_sendmsg+0x173c/0x1840 net/netlink/af_netlink.c:1919
sock_sendmsg_nosec net/socket.c:651 [inline]
sock_sendmsg net/socket.c:671 [inline]
____sys_sendmsg+0xc7a/0x1240 net/socket.c:2353
___sys_sendmsg net/socket.c:2407 [inline]
__sys_sendmsg+0x6d5/0x830 net/socket.c:2440
__do_sys_sendmsg net/socket.c:2449 [inline]
__se_sys_sendmsg+0x97/0xb0 net/socket.c:2447
__x64_sys_sendmsg+0x4a/0x70 net/socket.c:2447
do_syscall_64+0x9f/0x140 arch/x86/entry/common.c:48
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:121 [inline]
kmsan_internal_poison_shadow+0x5c/0xf0 mm/kmsan/kmsan.c:104
kmsan_slab_alloc+0x8d/0xe0 mm/kmsan/kmsan_hooks.c:76
slab_alloc_node mm/slub.c:2906 [inline]
__kmalloc_node_track_caller+0xc61/0x15f0 mm/slub.c:4512
__kmalloc_reserve net/core/skbuff.c:142 [inline]
__alloc_skb+0x309/0xae0 net/core/skbuff.c:210
alloc_skb include/linux/skbuff.h:1094 [inline]
netlink_alloc_large_skb net/netlink/af_netlink.c:1176 [inline]
netlink_sendmsg+0xdb8/0x1840 net/netlink/af_netlink.c:1894
sock_sendmsg_nosec net/socket.c:651 [inline]
sock_sendmsg net/socket.c:671 [inline]
____sys_sendmsg+0xc7a/0x1240 net/socket.c:2353
___sys_sendmsg net/socket.c:2407 [inline]
__sys_sendmsg+0x6d5/0x830 net/socket.c:2440
__do_sys_sendmsg net/socket.c:2449 [inline]
__se_sys_sendmsg+0x97/0xb0 net/socket.c:2447
__x64_sys_sendmsg+0x4a/0x70 net/socket.c:2447
do_syscall_64+0x9f/0x140 arch/x86/entry/common.c:48
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: a7b4f989a629 ("netfilter: ipset: IP set core support")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Calls to nla_strlcpy are now replaced by calls to nla_strscpy which is the new
name of this function.
Signed-off-by: Francis Laniel <laniel_francis@privacyrequired.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It makes possible to reproduce exactly the same set after a save/restore.
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The parameter defines the upper limit in any hash bucket at adding new entries
from userspace - if the limit would be exceeded, ipset doubles the hash size
and rehashes. It means the set may consume more memory but gives faster
evaluation at matching in the set.
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The -exist flag was supported with the create, add and delete commands.
In order to gracefully handle the destroy command with nonexistent sets,
the -exist flag is added to destroy too.
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
match
In ip_set_match_extensions(), for sets with counters, we take care of
updating counters themselves by calling ip_set_update_counter(), and of
checking if the given comparison and values match, by calling
ip_set_match_counter() if needed.
However, if a given comparison on counters doesn't match the configured
values, that doesn't mean the set entry itself isn't matching.
This fix restores the behaviour we had before commit 4750005a85f7
("netfilter: ipset: Fix "don't update counters" mode when counters used
at the matching"), without reintroducing the issue fixed there: back
then, mtype_data_match() first updated counters in any case, and then
took care of matching on counters.
Now, if the IPSET_FLAG_SKIP_COUNTER_UPDATE flag is set,
ip_set_update_counter() will anyway skip counter updates if desired.
The issue observed is illustrated by this reproducer:
ipset create c hash:ip counters
ipset add c 192.0.2.1
iptables -I INPUT -m set --match-set c src --bytes-gt 800 -j DROP
if we now send packets from 192.0.2.1, bytes and packets counters
for the entry as shown by 'ipset list' are always zero, and, no
matter how many bytes we send, the rule will never match, because
counters themselves are not updated.
Reported-by: Mithil Mhatre <mmhatre@redhat.com>
Fixes: 4750005a85f7 ("netfilter: ipset: Fix "don't update counters" mode when counters used at the matching")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Currently netadmin inside non-trusted container can quickly allocate
whole node's memory via request of huge ipset hashtable.
Other ipset-related memory allocations should be restricted too.
v2: fixed typo ALLOC -> ACCOUNT
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Whenever ip_set_alloc() is used, allocated memory can either
use kmalloc() or vmalloc(). We should call kvfree() or
ip_set_free()
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 21935 Comm: syz-executor.3 Not tainted 5.8.0-rc2-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:__phys_addr+0xa7/0x110 arch/x86/mm/physaddr.c:28
Code: 1d 7a 09 4c 89 e3 31 ff 48 d3 eb 48 89 de e8 d0 58 3f 00 48 85 db 75 0d e8 26 5c 3f 00 4c 89 e0 5b 5d 41 5c c3 e8 19 5c 3f 00 <0f> 0b e8 12 5c 3f 00 48 c7 c0 10 10 a8 89 48 ba 00 00 00 00 00 fc
RSP: 0000:ffffc900018572c0 EFLAGS: 00010046
RAX: 0000000000040000 RBX: 0000000000000001 RCX: ffffc9000fac3000
RDX: 0000000000040000 RSI: ffffffff8133f437 RDI: 0000000000000007
RBP: ffffc90098aff000 R08: 0000000000000000 R09: ffff8880ae636cdb
R10: 0000000000000000 R11: 0000000000000000 R12: 0000408018aff000
R13: 0000000000080000 R14: 000000000000001d R15: ffffc900018573d8
FS: 00007fc540c66700(0000) GS:ffff8880ae600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fc9dcd67200 CR3: 0000000059411000 CR4: 00000000001406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
virt_to_head_page include/linux/mm.h:841 [inline]
virt_to_cache mm/slab.h:474 [inline]
kfree+0x77/0x2c0 mm/slab.c:3749
hash_net_create+0xbb2/0xd70 net/netfilter/ipset/ip_set_hash_gen.h:1536
ip_set_create+0x6a2/0x13c0 net/netfilter/ipset/ip_set_core.c:1128
nfnetlink_rcv_msg+0xbe8/0xea0 net/netfilter/nfnetlink.c:230
netlink_rcv_skb+0x15a/0x430 net/netlink/af_netlink.c:2469
nfnetlink_rcv+0x1ac/0x420 net/netfilter/nfnetlink.c:564
netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline]
netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1329
netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1918
sock_sendmsg_nosec net/socket.c:652 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:672
____sys_sendmsg+0x6e8/0x810 net/socket.c:2352
___sys_sendmsg+0xf3/0x170 net/socket.c:2406
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2439
do_syscall_64+0x60/0xe0 arch/x86/entry/common.c:359
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x45cb19
Code: Bad RIP value.
RSP: 002b:00007fc540c65c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00000000004fed80 RCX: 000000000045cb19
RDX: 0000000000000000 RSI: 0000000020001080 RDI: 0000000000000003
RBP: 000000000078bf00 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
R13: 000000000000095e R14: 00000000004cc295 R15: 00007fc540c666d4
Fixes: f66ee0410b1c ("netfilter: ipset: Fix "INFO: rcu detected stall in hash_xxx" reports")
Fixes: 03c8b234e61a ("netfilter: ipset: Generalize extensions support")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
When using ip_set with counters and comment, traffic causes the kernel
to panic on 32-bit ARM:
Alignment trap: not handling instruction e1b82f9f at [<bf01b0dc>]
Unhandled fault: alignment exception (0x221) at 0xea08133c
PC is at ip_set_match_extensions+0xe0/0x224 [ip_set]
The problem occurs when we try to update the 64-bit counters - the
faulting address above is not 64-bit aligned. The problem occurs
due to the way elements are allocated, for example:
set->dsize = ip_set_elem_len(set, tb, 0, 0);
map = ip_set_alloc(sizeof(*map) + elements * set->dsize);
If the element has a requirement for a member to be 64-bit aligned,
and set->dsize is not a multiple of 8, but is a multiple of four,
then every odd numbered elements will be misaligned - and hitting
an atomic64_add() on that element will cause the kernel to panic.
ip_set_elem_len() must return a size that is rounded to the maximum
alignment of any extension field stored in the element. This change
ensures that is the case.
Fixes: 95ad1f4a9358 ("netfilter: ipset: Fix extension alignment")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|