summaryrefslogtreecommitdiff
path: root/net/sctp/input.c
AgeCommit message (Collapse)AuthorFilesLines
2016-04-28net: rename NET_{ADD|INC}_STATS_BH()Eric Dumazet1-1/+1
Rename NET_INC_STATS_BH() to __NET_INC_STATS() and NET_ADD_STATS_BH() to __NET_ADD_STATS() Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-28net: sctp: rename SCTP_INC_STATS_BH()Eric Dumazet1-6/+6
Rename SCTP_INC_STATS_BH() to __SCTP_INC_STATS() Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-28net: rename ICMP_INC_STATS_BH()Eric Dumazet1-1/+1
Rename ICMP_INC_STATS_BH() to __ICMP_INC_STATS() Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-20sctp: align MTU to a wordMarcelo Ricardo Leitner1-1/+2
SCTP is a protocol that is aligned to a word (4 bytes). Thus using bare MTU can sometimes return values that are not aligned, like for loopback, which is 65536 but ipv4_mtu() limits that to 65535. This mis-alignment will cause the last non-aligned bytes to never be used and can cause issues with congestion control. So it's better to just consider a lower MTU and keep congestion control calcs saner as they are based on PMTU. Same applies to icmp frag needed messages, which is also fixed by this patch. One other effect of this is the inability to send MTU-sized packet without queueing or fragmentation and without hitting Nagle. As the check performed at sctp_packet_can_append_data(): if (chunk->skb->len + q->out_qlen >= transport->pathmtu - packet->overhead) /* Enough data queued to fill a packet */ return SCTP_XMIT_OK; with the above example of MTU, if there are no other messages queued, one cannot send a packet that just fits one packet (65532 bytes) and without causing DATA chunk fragmentation or a delay. v2: - Added WORD_TRUNC macro Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-14sctp: allow sctp_transmit_packet and others to use gfpMarcelo Ricardo Leitner1-1/+1
Currently sctp_sendmsg() triggers some calls that will allocate memory with GFP_ATOMIC even when not necessary. In the case of sctp_packet_transmit it will allocate a linear skb that will be used to construct the packet and this may cause sends to fail due to ENOMEM more often than anticipated specially with big MTUs. This patch thus allows it to inherit gfp flags from upper calls so that it can use GFP_KERNEL if it was triggered by a sctp_sendmsg call or similar. All others, like retransmits or flushes started from BH, are still allocated using GFP_ATOMIC. In netperf tests this didn't result in any performance drawbacks when memory is not too fragmented and made it trigger ENOMEM way less often. Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17sctp: move rcu_read_lock from __sctp_lookup_association to ↵Xin Long1-2/+2
sctp_lookup_association __sctp_lookup_association() is only invoked by sctp_v4_err() and sctp_rcv(), both which run on the rx BH, and it has been protected by rcu_read_lock [see ip_local_deliver_finish() / ipv6_rcv()]. So we can move it to sctp_lookup_association, only let sctp_lookup_association use rcu_read_lock. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-29sctp: fix the transport dead race check by using atomic_add_unless on refcntXin Long1-6/+11
Now when __sctp_lookup_association is running in BH, it will try to check if t->dead is set, but meanwhile other CPUs may be freeing this transport and this assoc and if it happens that __sctp_lookup_association checked t->dead a bit too early, it may think that the association is still good while it was already freed. So we fix this race by using atomic_add_unless in sctp_transport_hold. After we get one transport from hashtable, we will hold it only when this transport's refcnt is not 0, so that we can make sure t->asoc cannot be freed before we hold the asoc again. Note that sctp association is not freed using RCU so we can't use atomic_add_unless() with it as it may just be too late for that either. Fixes: 4f0087812648 ("sctp: apply rhashtable api to send/recv path") Reported-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-18sctp: the temp asoc's transports should not be hashed/unhashedXin Long1-1/+7
Re-establish the previous behavior and avoid hashing temporary asocs by checking t->asoc->temp in sctp_(un)hash_transport. Also, remove the check of t->asoc->temp in __sctp_lookup_association, since they are never hashed now. Fixes: 4f0087812648 ("sctp: apply rhashtable api to send/recv path") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Reported-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-15sctp: support to lookup with ep+paddr in transport rhashtableXin Long1-15/+23
Now, when we sendmsg, we translate the ep to laddr by selecting the first element of the list, and then do a lookup for a transport. But sctp_hash_cmp() will compare it against asoc addr_list, which may be a subset of ep addr_list, meaning that this chosen laddr may not be there, and thus making it impossible to find the transport. So we fix it by using ep + paddr to lookup transports in hashtable. In sctp_hash_cmp, if .ep is set, we will check if this ep == asoc->ep, or we will do the laddr check. Fixes: d6c0256a60e6 ("sctp: add the rhashtable apis for sctp global transport hashtable") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Reported-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-05sctp: drop the old assoc hashtable of sctpXin Long1-61/+0
transport hashtable will replace the association hashtable, so association hashtable is not used in sctp any more, so drop the codes about that. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-05sctp: apply rhashtable api to send/recv pathXin Long1-29/+10
apply lookup apis to two functions, for __sctp_endpoint_lookup_assoc and __sctp_lookup_association, it's invoked in the protection of sock lock, it will be safe, but sctp_lookup_association need to call rcu_read_lock() and to detect the t->dead to protect it. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-05sctp: add the rhashtable apis for sctp global transport hashtableXin Long1-0/+131
tranport hashtbale will replace the association hashtable to do the lookup for transport, and then get association by t->assoc, rhashtable apis will be used because of it's resizable, scalable and using rcu. lport + rport + paddr will be the base hashkey to locate the chain, with net to protect one netns from another, then plus the laddr to compare to get the target. this patch will provider the lookup functions: - sctp_epaddr_lookup_transport - sctp_addrs_lookup_transport hash/unhash functions: - sctp_hash_transport - sctp_unhash_transport init/destroy functions: - sctp_transport_hashtable_init - sctp_transport_hashtable_destroy Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-30sctp: Change sctp to implement csum_levelsTom Herbert1-2/+6
CHECKSUM_UNNECESSARY may be applied to the SCTP CRC so we need to appropriate account for this by decrementing csum_level. This is done by calling __skb_dec_checksum_unnecessary. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-01net: fix the counter ICMP_MIB_INERRORS/ICMP6_MIB_INERRORSDuan Jiong1-5/+0
When dealing with ICMPv[46] Error Message, function icmp_socket_deliver() and icmpv6_notify() do some valid checks on packet's length, but then some protocols check packet's length redaudantly. So remove those duplicated statements, and increase counter ICMP_MIB_INERRORS/ICMP6_MIB_INERRORS in function icmp_socket_deliver() and icmpv6_notify() respectively. In addition, add missed counter in udp6/udplite6 when socket is NULL. Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22sctp: remove macros sctp_bh_[un]lock_sockwangweidong1-9/+9
Redefined bh_[un]lock_sock to sctp_bh[un]lock_sock for user space friendly code which we haven't use in years, so removing them. Signed-off-by: Wang Weidong <wangweidong1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22sctp: remove macros sctp_write_[un]_lockwangweidong1-8/+8
Redefined write_[un]lock to sctp_write_[un]lock for user space friendly code which we haven't use in years, so removing them. Signed-off-by: Wang Weidong <wangweidong1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22sctp: remove macros sctp_local_bh_{disable|enable}wangweidong1-10/+10
Redefined local_bh_{disable|enable} to sctp_local_bh_{disable|enable} for user space friendly code which we haven't use in years, so removing them. Signed-off-by: Wang Weidong <wangweidong1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-26sctp: fix checkpatch errors with open brace '{' and trailing statementswangweidong1-4/+2
fix checkpatch errors below: ERROR: that open brace { should be on the previous line ERROR: open brace '{' following function declarations go on the next line ERROR: trailing statements should be on next line Signed-off-by: Wang Weidong <wangweidong1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-26sctp: fix checkpatch errors with indentwangweidong1-24/+24
fix checkpatch errors below: ERROR: switch and case should be at the same inden ERROR: code indent should use tabs where possible Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Wang Weidong <wangweidong1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-26sctp: fix checkpatch errors with space required or prohibitedwangweidong1-2/+2
fix checkpatch errors while the space is required or prohibited to the "=,()++..." Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Wang Weidong <wangweidong1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-23sctp: remove the never used 'return' and redundant 'break'wangweidong1-11/+2
In switch() had do return, and never use the 'return NULL'. The 'break' after return or goto has no effect. Remove it. v2: make it more readable as suggested by Neil. Signed-off-by: Wang Weidong <wangweidong1@huawei.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-22ipv6: move ip6_sk_accept_pmtu from generic pmtu update path to ipv6 oneHannes Frederic Sowa1-3/+0
In commit 93b36cf3425b9b ("ipv6: support IPV6_PMTU_INTERFACE on sockets") I made a horrible mistake to add ip6_sk_accept_pmtu to the generic sctp_icmp_frag_needed path. This results in build warnings if IPv6 is disabled which were luckily caught by Fengguang's kbuild bot. But it also leads to a kernel panic IPv4 frag-needed packet is received. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-22Revert "sctp: fix missing include file"David S. Miller1-1/+0
This reverts commit ac0917f250c61ae1e395844ebd924db0e07d1f87. Better version of this fix forthcoming. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-21sctp: fix missing include filesfeldma@cumulusnetworks.com1-0/+1
Compile error reported by Jim Davis on netdev. ip6_sk_accept_pmtu() needs net/ip6_route.h Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-19ipv6: support IPV6_PMTU_INTERFACE on socketsHannes Frederic Sowa1-0/+3
IPV6_PMTU_INTERFACE is the same as IPV6_PMTU_PROBE for ipv6. Add it nontheless for symmetry with IPv4 sockets. Also drop incoming MTU information if this mode is enabled. The additional bit in ipv6_pinfo just eats in the padding behind the bitfield. There are no changes to the layout of the struct at all. Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-12sctp: remove redundant null check on asocwangweidong1-4/+2
In sctp_err_lookup, goto out while the asoc is not NULL, so remove the check NULL. Also, in sctp_err_finish which called by sctp_v4_err and sctp_v6_err, they pass asoc to sctp_err_finish while the asoc is not NULL, so remove the check. Signed-off-by: Wang Weidong <wangweidong1@huawei.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-06sctp: Fix FSF address in file headersJeff Kirsher1-3/+2
Several files refer to an old address for the Free Software Foundation in the file header comment. Resolve by replacing the address with the URL <http://www.gnu.org/licenses/> so that we do not have to keep updating the header comments anytime the address changes. CC: Vlad Yasevich <vyasevich@gmail.com> CC: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-17net: sctp: rfc4443: do not report ICMP redirects to user spaceDaniel Borkmann1-2/+1
Adapt the same behaviour for SCTP as present in TCP for ICMP redirect messages. For IPv6, RFC4443, section 2.4. says: ... (e) An ICMPv6 error message MUST NOT be originated as a result of receiving the following: ... (e.2) An ICMPv6 redirect message [IPv6-DISC]. ... Therefore, do not report an error to user space, just invoke dst's redirect callback and leave, same for IPv4 as done in TCP as well. The implication w/o having this patch could be that the reception of such packets would generate a poll notification and in worst case it could even tear down the whole connection. Therefore, stop updating sk_err on redirects. Reported-by: Duan Jiong <duanj.fnst@cn.fujitsu.com> Reported-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Suggested-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-10Revert "net: sctp: convert sctp_checksum_disable module param into sctp sysctl"David S. Miller1-2/+2
This reverts commit cda5f98e36576596b9230483ec52bff3cc97eb21. As per Vlad's request. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-09net: sctp: trivial: update bug report in header commentDaniel Borkmann1-6/+0
With the restructuring of the lksctp.org site, we only allow bug reports through the SCTP mailing list linux-sctp@vger.kernel.org, not via SF, as SF is only used for web hosting and nothing more. While at it, also remove the obvious statement that bugs will be fixed and incooperated into the kernel. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-09net: sctp: convert sctp_checksum_disable module param into sctp sysctlDaniel Borkmann1-2/+2
Get rid of the last module parameter for SCTP and make this configurable via sysctl for SCTP like all the rest of SCTP's configuration knobs. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-28net/sctp: Refactor SCTP skb checksum computationJoe Stringer1-9/+1
This patch consolidates the SCTP checksum calculation code from various places to a single new function, sctp_compute_cksum(skb, offset). Signed-off-by: Joe Stringer <joe@wand.net.nz> Reviewed-by: Julian Anastasov <ja@ssi.bg> Acked-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-25net: sctp: trivial: update mailing list addressDaniel Borkmann1-1/+1
The SCTP mailing list address to send patches or questions to is linux-sctp@vger.kernel.org and not lksctp-developers@lists.sourceforge.net anymore. Therefore, update all occurences. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-02net: sctp: rework debugging framework to use pr_debug and friendsDaniel Borkmann1-3/+3
We should get rid of all own SCTP debug printk macros and use the ones that the kernel offers anyway instead. This makes the code more readable and conform to the kernel code, and offers all the features of dynamic debbuging that pr_debug() et al has, such as only turning on/off portions of debug messages at runtime through debugfs. The runtime cost of having CONFIG_DYNAMIC_DEBUG enabled, but none of the debug statements printing, is negligible [1]. If kernel debugging is completly turned off, then these statements will also compile into "empty" functions. While we're at it, we also need to change the Kconfig option as it /now/ only refers to the ifdef'ed code portions in outqueue.c that enable further debugging/tracing of SCTP transaction fields. Also, since SCTP_ASSERT code was enabled with this Kconfig option and has now been removed, we transform those code parts into WARNs resp. where appropriate BUG_ONs so that those bugs can be more easily detected as probably not many people have SCTP debugging permanently turned on. To turn on all SCTP debugging, the following steps are needed: # mount -t debugfs none /sys/kernel/debug # echo -n 'module sctp +p' > /sys/kernel/debug/dynamic_debug/control This can be done more fine-grained on a per file, per line basis and others as described in [2]. [1] https://www.kernel.org/doc/ols/2009/ols2009-pages-39-46.pdf [2] Documentation/dynamic-debug-howto.txt Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-18net: sctp: remove SCTP_STATIC macroDaniel Borkmann1-2/+2
SCTP_STATIC is just another define for the static keyword. It's use is inconsistent in the SCTP code anyway and it was introduced in the initial implementation of SCTP in 2.5. We have a regression suite in lksctp-tools, but this is for user space only, so noone makes use of this macro anymore. The kernel test suite for 2.5 is incompatible with the current SCTP code anyway. So simply Remove it, to be more consistent with the rest of the kernel code. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-31sctp: Correct byte order of access to skb->{network, transport}_headerSimon Horman1-1/+1
Corrects an byte order conflict introduced by "sctp: Correct access to skb->{network, transport}_header". All the values in question are host byte order. Reported-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-29sctp: Correct access to skb->{network, transport}_headerSimon Horman1-1/+1
This corrects an regression introduced by "net: Use 16bits for *_headers fields of struct skbuff" when NET_SKBUFF_DATA_USES_OFFSET is not set. In that case sk_buff_data_t will be a pointer, however, skb->{network,transport}_header is now __u16. Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-28hlist: drop the node parameter from iteratorsSasha Levin1-4/+2
I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-04net: remove redundant check for timer pending state before del_timerYing Xue1-2/+1
As in del_timer() there has already placed a timer_pending() function to check whether the timer to be deleted is pending or not, it's unnecessary to check timer pending state again before del_timer() is called. Signed-off-by: Ying Xue <ying.xue@windriver.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-04sctp: fix a typo in prototype of __sctp_rcv_lookup()Nicolas Dichtel1-1/+1
Just to avoid confusion when people only reads this prototype. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-15sctp: Make sysctl tunables per netEric W. Biederman1-1/+1
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-15sctp: Push struct net down to sctp_chunk_event_lookupEric W. Biederman1-1/+3
This trickles up through sctp_sm_lookup_event up to sctp_do_sm and up further into sctp_primitiv_NAME before the code reaches places where struct net can be reliably found. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-15sctp: Make the mib per network namespaceEric W. Biederman1-11/+11
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-15sctp: Make the ctl_sock per network namespaceEric W. Biederman1-2/+2
- Kill sctp_get_ctl_sock, it is useless now. - Pass struct net where needed so net->sctp.ctl_sock is accessible. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-15sctp: Make the association hashtable handle multiple network namespacesEric W. Biederman1-24/+40
- Use struct net in the hash calculation - Use sock_net(association.base.sk) in the association lookups. - On receive calculate the network namespace from skb->dev. - Pass struct net from receive down to the functions that actually do the association lookup. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-15sctp: Make the endpoint hashtable handle multiple network namespacesEric W. Biederman1-7/+12
- Use struct net in the hash calculation - Use sock_net(endpoint.base.sk) in the endpoint lookups. - On receive calculate the network namespace from skb->dev. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-5/+2
Conflicts: drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
2012-07-17net: Pass optional SKB and SK arguments to dst_ops->{update_pmtu,redirect}()David S. Miller1-1/+1
This will be used so that we can compose a full flow key. Even though we have a route in this context, we need more. In the future the routes will be without destination address, source address, etc. keying. One ipv4 route will cover entire subnets, etc. In this environment we have to have a way to possess persistent storage for redirects and PMTU information. This persistent storage will exist in the FIB tables, and that's why we'll need to be able to rebuild a full lookup flow key here. Using that flow key will do a fib_lookup() and create/update the persistent entry. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17sctp: Fix list corruption resulting from freeing an association on a listNeil Horman1-5/+2
A few days ago Dave Jones reported this oops: [22766.294255] general protection fault: 0000 [#1] PREEMPT SMP [22766.295376] CPU 0 [22766.295384] Modules linked in: [22766.387137] ffffffffa169f292 6b6b6b6b6b6b6b6b ffff880147c03a90 ffff880147c03a74 [22766.387135] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 00000000000 [22766.387136] Process trinity-watchdo (pid: 10896, threadinfo ffff88013e7d2000, [22766.387137] Stack: [22766.387140] ffff880147c03a10 [22766.387140] ffffffffa169f2b6 [22766.387140] ffff88013ed95728 [22766.387143] 0000000000000002 [22766.387143] 0000000000000000 [22766.387143] ffff880003fad062 [22766.387144] ffff88013c120000 [22766.387144] [22766.387145] Call Trace: [22766.387145] <IRQ> [22766.387150] [<ffffffffa169f292>] ? __sctp_lookup_association+0x62/0xd0 [sctp] [22766.387154] [<ffffffffa169f2b6>] __sctp_lookup_association+0x86/0xd0 [sctp] [22766.387157] [<ffffffffa169f597>] sctp_rcv+0x207/0xbb0 [sctp] [22766.387161] [<ffffffff810d4da8>] ? trace_hardirqs_off_caller+0x28/0xd0 [22766.387163] [<ffffffff815827e3>] ? nf_hook_slow+0x133/0x210 [22766.387166] [<ffffffff815902fc>] ? ip_local_deliver_finish+0x4c/0x4c0 [22766.387168] [<ffffffff8159043d>] ip_local_deliver_finish+0x18d/0x4c0 [22766.387169] [<ffffffff815902fc>] ? ip_local_deliver_finish+0x4c/0x4c0 [22766.387171] [<ffffffff81590a07>] ip_local_deliver+0x47/0x80 [22766.387172] [<ffffffff8158fd80>] ip_rcv_finish+0x150/0x680 [22766.387174] [<ffffffff81590c54>] ip_rcv+0x214/0x320 [22766.387176] [<ffffffff81558c07>] __netif_receive_skb+0x7b7/0x910 [22766.387178] [<ffffffff8155856c>] ? __netif_receive_skb+0x11c/0x910 [22766.387180] [<ffffffff810d423e>] ? put_lock_stats.isra.25+0xe/0x40 [22766.387182] [<ffffffff81558f83>] netif_receive_skb+0x23/0x1f0 [22766.387183] [<ffffffff815596a9>] ? dev_gro_receive+0x139/0x440 [22766.387185] [<ffffffff81559280>] napi_skb_finish+0x70/0xa0 [22766.387187] [<ffffffff81559cb5>] napi_gro_receive+0xf5/0x130 [22766.387218] [<ffffffffa01c4679>] e1000_receive_skb+0x59/0x70 [e1000e] [22766.387242] [<ffffffffa01c5aab>] e1000_clean_rx_irq+0x28b/0x460 [e1000e] [22766.387266] [<ffffffffa01c9c18>] e1000e_poll+0x78/0x430 [e1000e] [22766.387268] [<ffffffff81559fea>] net_rx_action+0x1aa/0x3d0 [22766.387270] [<ffffffff810a495f>] ? account_system_vtime+0x10f/0x130 [22766.387273] [<ffffffff810734d0>] __do_softirq+0xe0/0x420 [22766.387275] [<ffffffff8169826c>] call_softirq+0x1c/0x30 [22766.387278] [<ffffffff8101db15>] do_softirq+0xd5/0x110 [22766.387279] [<ffffffff81073bc5>] irq_exit+0xd5/0xe0 [22766.387281] [<ffffffff81698b03>] do_IRQ+0x63/0xd0 [22766.387283] [<ffffffff8168ee2f>] common_interrupt+0x6f/0x6f [22766.387283] <EOI> [22766.387284] [22766.387285] [<ffffffff8168eed9>] ? retint_swapgs+0x13/0x1b [22766.387285] Code: c0 90 5d c3 66 0f 1f 44 00 00 4c 89 c8 5d c3 0f 1f 00 55 48 89 e5 48 83 ec 20 48 89 5d e8 4c 89 65 f0 4c 89 6d f8 66 66 66 66 90 <0f> b7 87 98 00 00 00 48 89 fb 49 89 f5 66 c1 c0 08 66 39 46 02 [22766.387307] [22766.387307] RIP [22766.387311] [<ffffffffa168a2c9>] sctp_assoc_is_match+0x19/0x90 [sctp] [22766.387311] RSP <ffff880147c039b0> [22766.387142] ffffffffa16ab120 [22766.599537] ---[ end trace 3f6dae82e37b17f5 ]--- [22766.601221] Kernel panic - not syncing: Fatal exception in interrupt It appears from his analysis and some staring at the code that this is likely occuring because an association is getting freed while still on the sctp_assoc_hashtable. As a result, we get a gpf when traversing the hashtable while a freed node corrupts part of the list. Nominally I would think that an mibalanced refcount was responsible for this, but I can't seem to find any obvious imbalance. What I did note however was that the two places where we create an association using sctp_primitive_ASSOCIATE (__sctp_connect and sctp_sendmsg), have failure paths which free a newly created association after calling sctp_primitive_ASSOCIATE. sctp_primitive_ASSOCIATE brings us into the sctp_sf_do_prm_asoc path, which issues a SCTP_CMD_NEW_ASOC side effect, which in turn adds a new association to the aforementioned hash table. the sctp command interpreter that process side effects has not way to unwind previously processed commands, so freeing the association from the __sctp_connect or sctp_sendmsg error path would lead to a freed association remaining on this hash table. I've fixed this but modifying sctp_[un]hash_established to use hlist_del_init, which allows us to proerly use hlist_unhashed to check if the node is on a hashlist safely during a delete. That in turn alows us to safely call sctp_unhash_established in the __sctp_connect and sctp_sendmsg error paths before freeing them, regardles of what the associations state is on the hash list. I noted, while I was doing this, that the __sctp_unhash_endpoint was using hlist_unhsashed in a simmilar fashion, but never nullified any removed nodes pointers to make that function work properly, so I fixed that up in a simmilar fashion. I attempted to test this using a virtual guest running the SCTP_RR test from netperf in a loop while running the trinity fuzzer, both in a loop. I wasn't able to recreate the problem prior to this fix, nor was I able to trigger the failure after (neither of which I suppose is suprising). Given the trace above however, I think its likely that this is what we hit. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Reported-by: davej@redhat.com CC: davej@redhat.com CC: "David S. Miller" <davem@davemloft.net> CC: Vlad Yasevich <vyasevich@gmail.com> CC: Sridhar Samudrala <sri@us.ibm.com> CC: linux-sctp@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-16sctp: Adjust PMTU updates to accomodate route invalidation.David S. Miller1-2/+2
This adjusts the call to dst_ops->update_pmtu() so that we can transparently handle the fact that, in the future, the dst itself can be invalidated by the PMTU update (when we have non-host routes cached in sockets). Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-07 01:45:04 +0300