summaryrefslogtreecommitdiff
path: root/net/sunrpc/socklib.c
AgeCommit message (Collapse)AuthorFilesLines
2020-08-20skb_copy_and_csum_bits(): don't bother with the last argumentAl Viro1-1/+1
it's always 0 Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-03-16SUNRPC: Refactor xs_sendpages()Chuck Lever1-0/+141
Re-locate xs_sendpages() so that it can be shared with server code. Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2019-05-21treewide: Add SPDX license identifier for missed filesThomas Gleixner1-0/+1
Add SPDX license identifiers to all files which: - Have no license information of any form - Have EXPORT_.*_SYMBOL_GPL inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25SUNRPC: Avoid digging into the ATOMIC poolChuck Lever1-1/+1
Page allocation requests made when the SPARSE_PAGES flag is set are allowed to fail, and are not critical. No need to spend a rare resource. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-11-15net: dump more useful information in netdev_rx_csum_fault()Cong Wang1-1/+1
Currently netdev_rx_csum_fault() only shows a device name, we need more information about the skb for debugging csum failures. Sample output: ens3: hw csum failure dev features: 0x0000000000014b89 skb len=84 data_len=0 pkt_type=0 gso_size=0 gso_type=0 nr_frags=0 ip_summed=0 csum=0 csum_complete_sw=0 csum_valid=0 csum_level=0 Note, I use pr_err() just to be consistent with the existing one. Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-30SUNRPC: Unexport xdr_partial_copy_from_skb()Trond Myklebust1-2/+2
It is no longer used outside of net/sunrpc/socklib.c Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-09-30SUNRPC: Allow AF_LOCAL sockets to use the generic stream receiveTrond Myklebust1-2/+2
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-09-30SUNRPC: Add a label for RPC calls that require allocation on receiveTrond Myklebust1-1/+1
If the RPC call relies on the receive call allocating pages as buffers, then let's label it so that we a) Don't leak memory by allocating pages for requests that do not expect this behaviour b) Can optimise for the common case where calls do not require allocation. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2016-04-11sunrpc: do not pull udp headers on receiveWillem de Bruijn1-1/+1
Commit e6afc8ace6dd modified the udp receive path by pulling the udp header before queuing an skbuff onto the receive queue. Sunrpc also calls skb_recv_datagram to dequeue an skb from a udp socket. Modify this receive path to also no longer expect udp headers. Fixes: e6afc8ace6dd ("udp: remove headers from UDP packets before queueing") Reported-by: Franklin S Cooper Jr. <fcooper@ti.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-04mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macrosKirill A. Shutemov1-3/+3
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-12net: Save software checksum completeTom Herbert1-1/+2
In skb_checksum complete, if we need to compute the checksum for the packet (via skb_checksum) save the result as CHECKSUM_COMPLETE. Subsequent checksum verification can use this. Also, added csum_complete_sw flag to distinguish between software and hardware generated checksum complete, we should always be able to trust the software computation. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-20sunrpc: remove the second argument of k[un]map_atomic()Cong Wang1-2/+2
Signed-off-by: Cong Wang <amwang@redhat.com>
2011-11-01net: Add export.h for EXPORT_SYMBOL/THIS_MODULE to non-modulesPaul Gortmaker1-0/+1
These files are non modular, but need to export symbols using the macros now living in export.h -- call out the include so that things won't break when we remove the implicit presence of module.h from everywhere. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo1-0/+1
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2008-01-30SUNRPC: temp var should match return type of xdr_skb_read_actorChuck Lever1-1/+1
The return type of xdr_skb_read_actor functions is size_t. This fixes a nit I unwittingly overlooked in commit dd456471. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-10SUNRPC: add EXPORT_SYMBOL_GPL for generic transport functions\"Talpey, Thomas\1-0/+3
SUNRPC: add EXPORT_SYMBOL_GPL for generic transport functions As a preface to allowing arbitrary transport modules to be loaded dynamically, add EXPORT_SYMBOL_GPL for all generic transport functions that a transport implementation might want to use. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Acked-by: Tom Talpey <tmt@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-04-26[NET]: Treat CHECKSUM_PARTIAL as CHECKSUM_UNNECESSARYHerbert Xu1-1/+1
When a transmitted packet is looped back directly, CHECKSUM_PARTIAL maps to the semantics of CHECKSUM_UNNECESSARY. Therefore we should treat it as such in the stack. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-06SUNRPC: Rename skb_reader_t and friendsChuck Lever1-4/+4
Clean-up: hch suggested that the RPC client shouldn't pollute the name space used by the generic skb manipulation routines in net/core/skbuff.c. Rename a couple of types in xdr.h to adhere to this convention. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-12-06SUNRPC: skb_read_bits is the same as xs_tcp_copy_dataChuck Lever1-7/+7
Clean-up: eliminate xs_tcp_copy_data -- it's exactly the same logic as the common routine skb_read_bits. The UDP and TCP socket read code now share the same routine for copying data into an xdr_buf. Now that skb_read_bits() is exported, rename it to avoid confusing it with a generic skb_* function. As these functions are XDR-specific, they should not have names that suggest they are of generic use. Also rename skb_read_and_csum_bits() to be consistent. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-12-03[NET]: Annotate callers of the reset of checksum.h stuff.Al Viro1-2/+3
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-03[NET]: Annotate callers of csum_fold() in net/*Al Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-23[NET]: Replace CHECKSUM_HW by CHECKSUM_PARTIAL/CHECKSUM_COMPLETEPatrick McHardy1-1/+1
Replace CHECKSUM_HW by CHECKSUM_PARTIAL (for outgoing packets, whose checksum still needs to be completed) and CHECKSUM_COMPLETE (for incoming packets, device supplied full checksum). Patch originally from Herbert Xu, updated by myself for 2.6.18-rc3. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-11[NET]: Detect hardware rx checksum faults correctlyHerbert Xu1-0/+5
Here is the patch that introduces the generic skb_checksum_complete which also checks for hardware RX checksum faults. If that happens, it'll call netdev_rx_csum_fault which currently prints out a stack trace with the device name. In future it can turn off RX checksum. I've converted every spot under net/ that does RX checksum checks to use skb_checksum_complete or __skb_checksum_complete with the exceptions of: * Those places where checksums are done bit by bit. These will call netdev_rx_csum_fault directly. * The following have not been completely checked/converted: ipmr ip_vs netfilter dccp This patch is based on patches and suggestions from Stephen Hemminger and David S. Miller. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-23[PATCH] RPC: extract socket logic common to both client and serverChuck Lever1-0/+175
Clean-up: Move some code that is common to both RPC client- and server-side socket transports into its own source file, net/sunrpc/socklib.c. Test-plan: Compile kernel with CONFIG_NFS enabled. Millions of fsx operations over UDP, client and server. Connectathon over UDP. Version: Thu, 11 Aug 2005 16:03:09 -0400 Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>