summaryrefslogtreecommitdiff
path: root/net/tipc/node.h
AgeCommit message (Collapse)AuthorFilesLines
2020-09-18tipc: add automatic session key exchangeTuong Lien1-0/+2
With support from the master key option in the previous commit, it becomes easy to make frequent updates/exchanges of session keys between authenticated cluster nodes. Basically, there are two situations where the key exchange will take in place: - When a new node joins the cluster (with the master key), it will need to get its peer's TX key, so that be able to decrypt further messages from that peer. - When a new session key is generated (by either user manual setting or later automatic rekeying feature), the key will be distributed to all peer nodes in the cluster. A key to be exchanged is encapsulated in the data part of a 'MSG_CRYPTO /KEY_DISTR_MSG' TIPC v2 message, then xmit-ed as usual and encrypted by using the master key before sending out. Upon receipt of the message it will be decrypted in the same way as regular messages, then attached as the sender's RX key in the receiver node. In this way, the key exchange is reliable by the link layer, as well as security, integrity and authenticity by the crypto layer. Also, the forward security will be easily achieved by user changing the master key actively but this should not be required very frequently. The key exchange feature is independent on the presence of a master key Note however that the master key still is needed for new nodes to be able to join the cluster. It is also optional, and can be turned off/on via the sysfs: 'net/tipc/key_exchange_enabled' [default 1: enabled]. Backward compatibility is guaranteed because for nodes that do not have master key support, key exchange using master key ie. tx_key = 0 if any will be shortly discarded at the message validation step. In other words, the key exchange feature will be automatically disabled to those nodes. v2: fix the "implicit declaration of function 'tipc_crypto_key_flush'" error in node.c. The function only exists when built with the TIPC "CONFIG_TIPC_CRYPTO" option. v3: use 'info->extack' for a message emitted due to netlink operations instead (- David's comment). Reported-by: kernel test robot <lkp@intel.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-17tipc: update a binding service via broadcastHoang Huu Le1-3/+5
Currently, updating binding table (add service binding to name table/withdraw a service binding) is being sent over replicast. However, if we are scaling up clusters to > 100 nodes/containers this method is less affection because of looping through nodes in a cluster one by one. It is worth to use broadcast to update a binding service. This way, the binding table can be updated on all peer nodes in one shot. Broadcast is used when all peer nodes, as indicated by a new capability flag TIPC_NAMED_BCAST, support reception of this message type. Four problems need to be considered when introducing this feature. 1) When establishing a link to a new peer node we still update this by a unicast 'bulk' update. This may lead to race conditions, where a later broadcast publication/withdrawal bypass the 'bulk', resulting in disordered publications, or even that a withdrawal may arrive before the corresponding publication. We solve this by adding an 'is_last_bulk' bit in the last bulk messages so that it can be distinguished from all other messages. Only when this message has arrived do we open up for reception of broadcast publications/withdrawals. 2) When a first legacy node is added to the cluster all distribution will switch over to use the legacy 'replicast' method, while the opposite happens when the last legacy node leaves the cluster. This entails another risk of message disordering that has to be handled. We solve this by adding a sequence number to the broadcast/replicast messages, so that disordering can be discovered and corrected. Note however that we don't need to consider potential message loss or duplication at this protocol level. 3) Bulk messages don't contain any sequence numbers, and will always arrive in order. Hence we must exempt those from the sequence number control and deliver them unconditionally. We solve this by adding a new 'is_bulk' bit in those messages so that they can be recognized. 4) Legacy messages, which don't contain any new bits or sequence numbers, but neither can arrive out of order, also need to be exempt from the initial synchronization and sequence number check, and delivered unconditionally. Therefore, we add another 'is_not_legacy' bit to all new messages so that those can be distinguished from legacy messages and the latter delivered directly. v1->v2: - fix warning issue reported by kbuild test robot <lkp@intel.com> - add santiy check to drop the publication message with a sequence number that is lower than the agreed synch point Signed-off-by: kernel test robot <lkp@intel.com> Signed-off-by: Hoang Huu Le <hoang.h.le@dektech.com.au> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-09tipc: add support for AEAD key setting via netlinkTuong Lien1-0/+4
This commit adds two netlink commands to TIPC in order for user to be able to set or remove AEAD keys: - TIPC_NL_KEY_SET - TIPC_NL_KEY_FLUSH When the 'KEY_SET' is given along with the key data, the key will be initiated and attached to TIPC crypto. On the other hand, the 'KEY_FLUSH' command will remove all existing keys if any. Acked-by: Ying Xue <ying.xue@windreiver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-09tipc: introduce TIPC encryption & authenticationTuong Lien1-0/+8
This commit offers an option to encrypt and authenticate all messaging, including the neighbor discovery messages. The currently most advanced algorithm supported is the AEAD AES-GCM (like IPSec or TLS). All encryption/decryption is done at the bearer layer, just before leaving or after entering TIPC. Supported features: - Encryption & authentication of all TIPC messages (header + data); - Two symmetric-key modes: Cluster and Per-node; - Automatic key switching; - Key-expired revoking (sequence number wrapped); - Lock-free encryption/decryption (RCU); - Asynchronous crypto, Intel AES-NI supported; - Multiple cipher transforms; - Logs & statistics; Two key modes: - Cluster key mode: One single key is used for both TX & RX in all nodes in the cluster. - Per-node key mode: Each nodes in the cluster has one specific TX key. For RX, a node requires its peers' TX key to be able to decrypt the messages from those peers. Key setting from user-space is performed via netlink by a user program (e.g. the iproute2 'tipc' tool). Internal key state machine: Attach Align(RX) +-+ +-+ | V | V +---------+ Attach +---------+ | IDLE |---------------->| PENDING |(user = 0) +---------+ +---------+ A A Switch| A | | | | | | Free(switch/revoked) | | (Free)| +----------------------+ | |Timeout | (TX) | | |(RX) | | | | | | v | +---------+ Switch +---------+ | PASSIVE |<----------------| ACTIVE | +---------+ (RX) +---------+ (user = 1) (user >= 1) The number of TFMs is 10 by default and can be changed via the procfs 'net/tipc/max_tfms'. At this moment, as for simplicity, this file is also used to print the crypto statistics at runtime: echo 0xfff1 > /proc/sys/net/tipc/max_tfms The patch defines a new TIPC version (v7) for the encryption message (- backward compatibility as well). The message is basically encapsulated as follows: +----------------------------------------------------------+ | TIPCv7 encryption | Original TIPCv2 | Authentication | | header | packet (encrypted) | Tag | +----------------------------------------------------------+ The throughput is about ~40% for small messages (compared with non- encryption) and ~9% for large messages. With the support from hardware crypto i.e. the Intel AES-NI CPU instructions, the throughput increases upto ~85% for small messages and ~55% for large messages. By default, the new feature is inactive (i.e. no encryption) until user sets a key for TIPC. There is however also a new option - "TIPC_CRYPTO" in the kernel configuration to enable/disable the new code when needed. MAINTAINERS | add two new files 'crypto.h' & 'crypto.c' in tipc Acked-by: Ying Xue <ying.xue@windreiver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-09tipc: enable creating a "preliminary" nodeTuong Lien1-0/+1
When user sets RX key for a peer not existing on the own node, a new node entry is needed to which the RX key will be attached. However, since the peer node address (& capabilities) is unknown at that moment, only the node-ID is provided, this commit allows the creation of a node with only the data that we call as “preliminary”. A preliminary node is not the object of the “tipc_node_find()” but the “tipc_node_find_by_id()”. Once the first message i.e. LINK_CONFIG comes from that peer, and is successfully decrypted by the own node, the actual peer node data will be properly updated and the node will function as usual. In addition, the node timer always starts when a node object is created so if a preliminary node is not used, it will be cleaned up. The later encryption functions will also use the node timer and be able to create a preliminary node automatically when needed. Acked-by: Ying Xue <ying.xue@windreiver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-30tipc: add smart nagle featureJon Maloy1-2/+5
We introduce a feature that works like a combination of TCP_NAGLE and TCP_CORK, but without some of the weaknesses of those. In particular, we will not observe long delivery delays because of delayed acks, since the algorithm itself decides if and when acks are to be sent from the receiving peer. - The nagle property as such is determined by manipulating a new 'maxnagle' field in struct tipc_sock. If certain conditions are met, 'maxnagle' will define max size of the messages which can be bundled. If it is set to zero no messages are ever bundled, implying that the nagle property is disabled. - A socket with the nagle property enabled enters nagle mode when more than 4 messages have been sent out without receiving any data message from the peer. - A socket leaves nagle mode whenever it receives a data message from the peer. In nagle mode, messages smaller than 'maxnagle' are accumulated in the socket write queue. The last buffer in the queue is marked with a new 'ack_required' bit, which forces the receiving peer to send a CONN_ACK message back to the sender upon reception. The accumulated contents of the write queue is transmitted when one of the following events or conditions occur. - A CONN_ACK message is received from the peer. - A data message is received from the peer. - A SOCK_WAKEUP pseudo message is received from the link level. - The write queue contains more than 64 1k blocks of data. - The connection is being shut down. - There is no CONN_ACK message to expect. I.e., there is currently no outstanding message where the 'ack_required' bit was set. As a consequence, the first message added after we enter nagle mode is always sent directly with this bit set. This new feature gives a 50-100% improvement of throughput for small (i.e., less than MTU size) messages, while it might add up to one RTT to latency time when the socket is in nagle mode. Acked-by: Ying Xue <ying.xue@windreiver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-30tipc: improve throughput between nodes in netnsHoang Le1-2/+3
Currently, TIPC transports intra-node user data messages directly socket to socket, hence shortcutting all the lower layers of the communication stack. This gives TIPC very good intra node performance, both regarding throughput and latency. We now introduce a similar mechanism for TIPC data traffic across network namespaces located in the same kernel. On the send path, the call chain is as always accompanied by the sending node's network name space pointer. However, once we have reliably established that the receiving node is represented by a namespace on the same host, we just replace the namespace pointer with the receiving node/namespace's ditto, and follow the regular socket receive patch though the receiving node. This technique gives us a throughput similar to the node internal throughput, several times larger than if we let the traffic go though the full network stacks. As a comparison, max throughput for 64k messages is four times larger than TCP throughput for the same type of traffic. To meet any security concerns, the following should be noted. - All nodes joining a cluster are supposed to have been be certified and authenticated by mechanisms outside TIPC. This is no different for nodes/namespaces on the same host; they have to auto discover each other using the attached interfaces, and establish links which are supervised via the regular link monitoring mechanism. Hence, a kernel local node has no other way to join a cluster than any other node, and have to obey to policies set in the IP or device layers of the stack. - Only when a sender has established with 100% certainty that the peer node is located in a kernel local namespace does it choose to let user data messages, and only those, take the crossover path to the receiving node/namespace. - If the receiving node/namespace is removed, its namespace pointer is invalidated at all peer nodes, and their neighbor link monitoring will eventually note that this node is gone. - To ensure the "100% certainty" criteria, and prevent any possible spoofing, received discovery messages must contain a proof that the sender knows a common secret. We use the hash mix of the sending node/namespace for this purpose, since it can be accessed directly by all other namespaces in the kernel. Upon reception of a discovery message, the receiver checks this proof against all the local namespaces'hash_mix:es. If it finds a match, that, along with a matching node id and cluster id, this is deemed sufficient proof that the peer node in question is in a local namespace, and a wormhole can be opened. - We should also consider that TIPC is intended to be a cluster local IPC mechanism (just like e.g. UNIX sockets) rather than a network protocol, and hence we think it can justified to allow it to shortcut the lower protocol layers. Regarding traceability, we should notice that since commit 6c9081a3915d ("tipc: add loopback device tracking") it is possible to follow the node internal packet flow by just activating tcpdump on the loopback interface. This will be true even for this mechanism; by activating tcpdump on the involved nodes' loopback interfaces their inter-name space messaging can easily be tracked. v2: - update 'net' pointer when node left/rejoined v3: - grab read/write lock when using node ref obj v4: - clone traffics between netns to loopback Suggested-by: Jon Maloy <jon.maloy@ericsson.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-26tipc: optimize link synching mechanismTuong Lien1-2/+4
This commit along with the next one are to resolve the issues with the link changeover mechanism. See that commit for details. Basically, for the link synching, from now on, we will send only one single ("dummy") SYNCH message to peer. The SYNCH message does not contain any data, just a header conveying the synch point to the peer. A new node capability flag ("TIPC_TUNNEL_ENHANCED") is introduced for backward compatible! Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Suggested-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-05tipc: improve TIPC throughput by Gap ACK blocksTuong Lien1-2/+4
During unicast link transmission, it's observed very often that because of one or a few lost/dis-ordered packets, the sending side will fastly reach the send window limit and must wait for the packets to be arrived at the receiving side or in the worst case, a retransmission must be done first. The sending side cannot release a lot of subsequent packets in its transmq even though all of them might have already been received by the receiving side. That is, one or two packets dis-ordered/lost and dozens of packets have to wait, this obviously reduces the overall throughput! This commit introduces an algorithm to overcome this by using "Gap ACK blocks". Basically, a Gap ACK block will consist of <ack, gap> numbers that describes the link deferdq where packets have been got by the receiving side but with gaps, for example: link deferdq: [1 2 3 4 10 11 13 14 15 20] --> Gap ACK blocks: <4, 5>, <11, 1>, <15, 4>, <20, 0> The Gap ACK blocks will be sent to the sending side along with the traditional ACK or NACK message. Immediately when receiving the message the sending side will now not only release from its transmq the packets ack-ed by the ACK but also by the Gap ACK blocks! So, more packets can be enqueued and transmitted. In addition, the sending side can now do "multi-retransmissions" according to the Gaps reported in the Gap ACK blocks. The new algorithm as verified helps greatly improve the TIPC throughput especially under packet loss condition. So far, a maximum of 32 blocks is quite enough without any "Too few Gap ACK blocks" reports with a 5.0% packet loss rate, however this number can be increased in the furture if needed. Also, the patch is backward compatible. Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19tipc: introduce new capability flag for clusterHoang Le1-2/+4
As a preparation for introducing a smooth switching between replicast and broadcast method for multicast message, We have to introduce a new capability flag TIPC_MCAST_RBCTL to handle this new feature. During a cluster upgrade a node can come back with this new capabilities which also must be reflected in the cluster capabilities field. The new feature is only applicable if all node in the cluster supports this new capability. Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19tipc: enable tracepoints in tipcTuong Lien1-0/+1
As for the sake of debugging/tracing, the commit enables tracepoints in TIPC along with some general trace_events as shown below. It also defines some 'tipc_*_dump()' functions that allow to dump TIPC object data whenever needed, that is, for general debug purposes, ie. not just for the trace_events. The following trace_events are now available: - trace_tipc_skb_dump(): allows to trace and dump TIPC msg & skb data, e.g. message type, user, droppable, skb truesize, cloned skb, etc. - trace_tipc_list_dump(): allows to trace and dump any TIPC buffers or queues, e.g. TIPC link transmq, socket receive queue, etc. - trace_tipc_sk_dump(): allows to trace and dump TIPC socket data, e.g. sk state, sk type, connection type, rmem_alloc, socket queues, etc. - trace_tipc_link_dump(): allows to trace and dump TIPC link data, e.g. link state, silent_intv_cnt, gap, bc_gap, link queues, etc. - trace_tipc_node_dump(): allows to trace and dump TIPC node data, e.g. node state, active links, capabilities, link entries, etc. How to use: Put the trace functions at any places where we want to dump TIPC data or events. Note: a) The dump functions will generate raw data only, that is, to offload the trace event's processing, it can require a tool or script to parse the data but this should be simple. b) The trace_tipc_*_dump() should be reserved for a failure cases only (e.g. the retransmission failure case) or where we do not expect to happen too often, then we can consider enabling these events by default since they will almost not take any effects under normal conditions, but once the rare condition or failure occurs, we get the dumped data fully for post-analysis. For other trace purposes, we can reuse these trace classes as template but different events. c) A trace_event is only effective when we enable it. To enable the TIPC trace_events, echo 1 to 'enable' files in the events/tipc/ directory in the 'debugfs' file system. Normally, they are located at: /sys/kernel/debug/tracing/events/tipc/ For example: To enable the tipc_link_dump event: echo 1 > /sys/kernel/debug/tracing/events/tipc/tipc_link_dump/enable To enable all the TIPC trace_events: echo 1 > /sys/kernel/debug/tracing/events/tipc/enable To collect the trace data: cat trace or cat trace_pipe > /trace.out & To disable all the TIPC trace_events: echo 0 > /sys/kernel/debug/tracing/events/tipc/enable To clear the trace buffer: echo > trace d) Like the other trace_events, the feature like 'filter' or 'trigger' is also usable for the tipc trace_events. For more details, have a look at: Documentation/trace/ftrace.txt MAINTAINERS | add two new files 'trace.h' & 'trace.c' in tipc Acked-by: Ying Xue <ying.xue@windriver.com> Tested-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29tipc: add SYN bit to connection setup messagesJon Maloy1-5/+7
Messages intended for intitating a connection are currently indistinguishable from regular datagram messages. The TIPC protocol specification defines bit 17 in word 0 as a SYN bit to allow sanity check of such messages in the listening socket, but this has so far never been implemented. We do that in this commit. Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-12tipc: add sequence number check for link STATE messagesJon Maloy1-6/+8
Some switch infrastructures produce huge amounts of packet duplicates. This becomes a problem if those messages are STATE/NACK protocol messages, causing unnecessary retransmissions of already accepted packets. We now introduce a unique sequence number per STATE protocol message so that duplicates can be identified and ignored. This will also be useful when tracing such cases, and to avert replay attacks when TIPC is encrypted. For compatibility reasons we have to introduce a new capability flag TIPC_LINK_PROTO_SEQNO to handle this new feature. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27tipc: introduce ioctl for fetching node identityJon Maloy1-0/+1
After the introduction of a 128-bit node identity it may be difficult for a user to correlate between this identity and the generated node hash address. We now try to make this easier by introducing a new ioctl() call for fetching a node identity by using the hash value as key. This will be particularly useful when we extend some of the commands in the 'tipc' tool, but we also expect regular user applications to need this feature. Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-20tipc: confgiure and apply UDP bearer MTU on running linksGhantaKrishnamurthy MohanKrishna1-1/+1
Currently, we have option to configure MTU of UDP media. The configured MTU takes effect on the links going up after that moment. I.e, a user has to reset bearer to have new value applied across its links. This is confusing and disturbing on a running cluster. We now introduce the functionality to change the default UDP bearer MTU in struct tipc_bearer. Additionally, the links are updated dynamically, without any need for a reset, when bearer value is changed. We leverage the existing per-link functionality and the design being symetrical to the confguration of link tolerance. Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: GhantaKrishnamurthy MohanKrishna <mohan.krishna.ghanta.krishnamurthy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-23tipc: handle collisions of 32-bit node address hash valuesJon Maloy1-1/+2
When a 32-bit node address is generated from a 128-bit identifier, there is a risk of collisions which must be discovered and handled. We do this as follows: - We don't apply the generated address immediately to the node, but do instead initiate a 1 sec trial period to allow other cluster members to discover and handle such collisions. - During the trial period the node periodically sends out a new type of message, DSC_TRIAL_MSG, using broadcast or emulated broadcast, to all the other nodes in the cluster. - When a node is receiving such a message, it must check that the presented 32-bit identifier either is unused, or was used by the very same peer in a previous session. In both cases it accepts the request by not responding to it. - If it finds that the same node has been up before using a different address, it responds with a DSC_TRIAL_FAIL_MSG containing that address. - If it finds that the address has already been taken by some other node, it generates a new, unused address and returns it to the requester. - During the trial period the requesting node must always be prepared to accept a failure message, i.e., a message where a peer suggests a different (or equal) address to the one tried. In those cases it must apply the suggested value as trial address and restart the trial period. This algorithm ensures that in the vast majority of cases a node will have the same address before and after a reboot. If a legacy user configures the address explicitly, there will be no trial period and messages, so this protocol addition is completely backwards compatible. Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-23tipc: add 128-bit node identifierJon Maloy1-2/+2
We add a 128-bit node identity, as an alternative to the currently used 32-bit node address. For the sake of compatibility and to minimize message header changes we retain the existing 32-bit address field. When not set explicitly by the user, this field will be filled with a hash value generated from the much longer node identity, and be used as a shorthand value for the latter. We permit either the address or the identity to be set by configuration, but not both, so when the address value is set by a legacy user the corresponding 128-bit node identity is generated based on the that value. Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-23tipc: remove restrictions on node address valuesJon Maloy1-2/+3
Nominally, TIPC organizes network nodes into a three-level network hierarchy consisting of the levels 'zone', 'cluster' and 'node'. This hierarchy is reflected in the node address format, - it is sub-divided into an 8-bit zone id, and 12 bit cluster id, and a 12-bit node id. However, the 'zone' and 'cluster' levels have in reality never been fully implemented,and never will be. The result of this has been that the first 20 bits the node identity structure have been wasted, and the usable node identity range within a cluster has been limited to 12 bits. This is starting to become a problem. In the following commits, we will need to be able to connect between nodes which are using the whole 32-bit value space of the node address. We therefore remove the restrictions on which values can be assigned to node identity, -it is from now on only a 32-bit integer with no assumed internal structure. Isolation between clusters is now achieved only by setting different values for the 'network id' field used during neighbor discovery, in practice leading to the latter becoming the new cluster identity. The rules for accepting discovery requests/responses from neighboring nodes now become: - If the user is using legacy address format on both peers, reception of discovery messages is subject to the legacy lookup domain check in addition to the cluster id check. - Otherwise, the discovery request/response is always accepted, provided both peers have the same network id. This secures backwards compatibility for users who have been using zone or cluster identities as cluster separators, instead of the intended 'network id'. Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-14tipc: apply bearer link tolerance on running linksJon Maloy1-0/+1
Currently, the default link tolerance set in struct tipc_bearer only has effect on links going up after that moment. I.e., a user has to reset all the node's links across that bearer to have the new value applied. This is too limiting and disturbing on a running cluster to be useful. We now change this so that also already existing links are updated dynamically, without any need for a reset, when the bearer value is changed. We leverage the already existing per-link functionality for this to achieve the wanted effect. Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-13tipc: introduce communication groupsJon Maloy1-1/+2
As a preparation for introducing flow control for multicast and datagram messaging we need a more strictly defined framework than we have now. A socket must be able keep track of exactly how many and which other sockets it is allowed to communicate with at any moment, and keep the necessary state for those. We therefore introduce a new concept we have named Communication Group. Sockets can join a group via a new setsockopt() call TIPC_GROUP_JOIN. The call takes four parameters: 'type' serves as group identifier, 'instance' serves as an logical member identifier, and 'scope' indicates the visibility of the group (node/cluster/zone). Finally, 'flags' makes it possible to set certain properties for the member. For now, there is only one flag, indicating if the creator of the socket wants to receive a copy of broadcast or multicast messages it is sending via the socket, and if wants to be eligible as destination for its own anycasts. A group is closed, i.e., sockets which have not joined a group will not be able to send messages to or receive messages from members of the group, and vice versa. Any member of a group can send multicast ('group broadcast') messages to all group members, optionally including itself, using the primitive send(). The messages are received via the recvmsg() primitive. A socket can only be member of one group at a time. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-13tipc: add new function for sending multiple small messagesJon Maloy1-0/+1
We see an increasing need to send multiple single-buffer messages of TIPC_SYSTEM_IMPORTANCE to different individual destination nodes. Instead of looping over the send queue and sending each buffer individually, as we do now, we add a new help function tipc_node_distr_xmit() to do this. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-13tipc: add ability to obtain node availability status from other filesJon Maloy1-0/+1
In the coming commits, functions at the socket level will need the ability to read the availability status of a given node. We therefore introduce a new function for this purpose, while renaming the existing static function currently having the wanted name. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-20tipc: make replicast a user selectable optionJon Paul Maloy1-1/+3
If the bearer carrying multicast messages supports broadcast, those messages will be sent to all cluster nodes, irrespective of whether these nodes host any actual destinations socket or not. This is clearly wasteful if the cluster is large and there are only a few real destinations for the message being sent. In this commit we extend the eligibility of the newly introduced "replicast" transmit option. We now make it possible for a user to select which method he wants to be used, either as a mandatory setting via setsockopt(), or as a relative setting where we let the broadcast layer decide which method to use based on the ratio between cluster size and the message's actual number of destination nodes. In the latter case, a sending socket must stick to a previously selected method until it enters an idle period of at least 5 seconds. This eliminates the risk of message reordering caused by method change, i.e., when changes to cluster size or number of destinations would otherwise mandate a new method to be used. Reviewed-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-03tipc: transfer broadcast nacks in link state messagesJon Paul Maloy1-4/+7
When we send broadcasts in clusters of more 70-80 nodes, we sometimes see the broadcast link resetting because of an excessive number of retransmissions. This is caused by a combination of two factors: 1) A 'NACK crunch", where loss of broadcast packets is discovered and NACK'ed by several nodes simultaneously, leading to multiple redundant broadcast retransmissions. 2) The fact that the NACKS as such also are sent as broadcast, leading to excessive load and packet loss on the transmitting switch/bridge. This commit deals with the latter problem, by moving sending of broadcast nacks from the dedicated BCAST_PROTOCOL/NACK message type to regular unicast LINK_PROTOCOL/STATE messages. We allocate 10 unused bits in word 8 of the said message for this purpose, and introduce a new capability bit, TIPC_BCAST_STATE_NACK in order to keep the change backwards compatible. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19tipc: add peer removal functionalityRichard Alpe1-0/+1
Add TIPC_NL_PEER_REMOVE netlink command. This command can remove an offline peer node from the internal data structures. This will be supported by the tipc user space tool in iproute2. Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-27tipc: dump monitor attributesParthasarathy Bhuvaragan1-0/+3
In this commit, we dump the monitor attributes when queried. The link monitor attributes are separated into two kinds: 1. general attributes per bearer 2. specific attributes per node/peer This style resembles the socket attributes and the nametable publications per socket. Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-27tipc: get monitor threshold for the clusterParthasarathy Bhuvaragan1-0/+1
In this commit, we add support to fetch the configured cluster monitoring threshold. Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-27tipc: make cluster size threshold for monitoring configurableParthasarathy Bhuvaragan1-0/+1
In this commit, we introduce support to configure the minimum threshold to activate the new link monitoring algorithm. Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-03tipc: redesign connection-level flow controlJon Paul Maloy1-2/+3
There are two flow control mechanisms in TIPC; one at link level that handles network congestion, burst control, and retransmission, and one at connection level which' only remaining task is to prevent overflow in the receiving socket buffer. In TIPC, the latter task has to be solved end-to-end because messages can not be thrown away once they have been accepted and delivered upwards from the link layer, i.e, we can never permit the receive buffer to overflow. Currently, this algorithm is message based. A counter in the receiving socket keeps track of number of consumed messages, and sends a dedicated acknowledge message back to the sender for each 256 consumed message. A counter at the sending end keeps track of the sent, not yet acknowledged messages, and blocks the sender if this number ever reaches 512 unacknowledged messages. When the missing acknowledge arrives, the socket is then woken up for renewed transmission. This works well for keeping the message flow running, as it almost never happens that a sender socket is blocked this way. A problem with the current mechanism is that it potentially is very memory consuming. Since we don't distinguish between small and large messages, we have to dimension the socket receive buffer according to a worst-case of both. I.e., the window size must be chosen large enough to sustain a reasonable throughput even for the smallest messages, while we must still consider a scenario where all messages are of maximum size. Hence, the current fix window size of 512 messages and a maximum message size of 66k results in a receive buffer of 66 MB when truesize(66k) = 131k is taken into account. It is possible to do much better. This commit introduces an algorithm where we instead use 1024-byte blocks as base unit. This unit, always rounded upwards from the actual message size, is used when we advertise windows as well as when we count and acknowledge transmitted data. The advertised window is based on the configured receive buffer size in such a way that even the worst-case truesize/msgsize ratio always is covered. Since the smallest possible message size (from a flow control viewpoint) now is 1024 bytes, we can safely assume this ratio to be less than four, which is the value we are now using. This way, we have been able to reduce the default receive buffer size from 66 MB to 2 MB with maintained performance. In order to keep this solution backwards compatible, we introduce a new capability bit in the discovery protocol, and use this throughout the message sending/reception path to always select the right unit. Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-03tipc: propagate peer node capabilities to socket layerJon Paul Maloy1-0/+1
During neighbor discovery, nodes advertise their capabilities as a bit map in a dedicated 16-bit field in the discovery message header. This bit map has so far only be stored in the node structure on the peer nodes, but we now see the need to keep a copy even in the socket structure. This commit adds this functionality. Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-20tipc: narrow down interface towards struct tipc_linkJon Paul Maloy1-2/+2
We move the definition of struct tipc_link from link.h to link.c in order to minimize its exposure to the rest of the code. When needed, we define new functions to make it possible for external entities to access and set data in the link. Apart from the above, there are no functional changes. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-20tipc: narrow down exposure of struct tipc_nodeJon Paul Maloy1-113/+4
In our effort to have less code and include dependencies between entities such as node, link and bearer, we try to narrow down the exposed interface towards the node as much as possible. In this commit, we move the definition of struct tipc_node, along with many of its associated function declarations, from node.h to node.c. We also move some function definitions from link.c and name_distr.c to node.c, since they access fields in struct tipc_node that should not be externally visible. The moved functions are renamed according to new location, and made static whenever possible. There are no functional changes in this commit. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-20tipc: convert node lock to rwlockJon Paul Maloy1-7/+3
According to the node FSM a node in state SELF_UP_PEER_UP cannot change state inside a lock context, except when a TUNNEL_PROTOCOL (SYNCH or FAILOVER) packet arrives. However, the node's individual links may still change state. Since each link now is protected by its own spinlock, we finally have the conditions in place to convert the node spinlock to an rwlock_t. If the node state and arriving packet type are rigth, we can let the link directly receive the packet under protection of its own spinlock and the node lock in read mode. In all other cases we use the node lock in write mode. This enables full concurrent execution between parallel links during steady-state traffic situations, i.e., 99+ % of the time. This commit implements this change. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-20tipc: introduce per-link spinlockJon Paul Maloy1-1/+2
As a preparation to allow parallel links to work more independently from each other we introduce a per-link spinlock, to be stored in the struct nodes's link entry area. Since the node lock still is a regular spinlock there is no increase in parallellism at this stage. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-20tipc: reduce code dependency between binding table and node layerJon Paul Maloy1-0/+3
The file name_distr.c currently contains three functions, named_cluster_distribute(), tipc_publ_subcscribe() and tipc_publ_unsubscribe() that all directly access fields in struct tipc_node. We want to eliminate such dependencies, so we move those functions to the file node.c and rename them to tipc_node_broadcast(), tipc_node_subscribe() and tipc_node_unsubscribe() respectively. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-24tipc: clean up unused code and structuresJon Paul Maloy1-29/+1
After the previous changes in this series, we can now remove some unused code and structures, both in the broadcast, link aggregation and link code. There are no functional changes in this commit. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-24tipc: let broadcast packet reception use new link receive functionJon Paul Maloy1-0/+9
The code path for receiving broadcast packets is currently distinct from the unicast path. This leads to unnecessary code and data duplication, something that can be avoided with some effort. We now introduce separate per-peer tipc_link instances for handling broadcast packet reception. Each receive link keeps a pointer to the common, single, broadcast link instance, and can hence handle release and retransmission of send buffers as if they belonged to the own instance. Furthermore, we let each unicast link instance keep a reference to both the pertaining broadcast receive link, and to the common send link. This makes it possible for the unicast links to easily access data for broadcast link synchronization, as well as for carrying acknowledges for received broadcast packets. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-24tipc: introduce capability bit for broadcast synchronizationJon Paul Maloy1-0/+8
Until now, we have tried to support both the newer, dedicated broadcast synchronization mechanism along with the older, less safe, RESET_MSG/ ACTIVATE_MSG based one. The latter method has turned out to be a hazard in a highly dynamic cluster, so we find it safer to disable it completely when we find that the former mechanism is supported by the peer node. For this purpose, we now introduce a new capabability bit, TIPC_BCAST_SYNCH, to inform any peer nodes that dedicated broadcast syncronization is supported by the present node. The new bit is conveyed between peers in the 'capabilities' field of neighbor discovery messages. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-31tipc: remove implicit message delivery in node_unlock()Jon Paul Maloy1-4/+0
After the most recent changes, all access calls to a link which may entail addition of messages to the link's input queue are postpended by an explicit call to tipc_sk_rcv(), using a reference to the correct queue. This means that the potentially hazardous implicit delivery, using tipc_node_unlock() in combination with a binary flag and a cached queue pointer, now has become redundant. This commit removes this implicit delivery mechanism both for regular data messages and for binding table update messages. Tested-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-31tipc: move received discovery data evaluation inside node.cJon Paul Maloy1-6/+5
The node lock is currently grabbed and and released in the function tipc_disc_rcv() in the file discover.c. As a preparation for the next commits, we need to move this node lock handling, along with the code area it is covering, to node.c. This commit introduces this change. Tested-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-31tipc: move link synch and failover to link aggregation levelJon Paul Maloy1-28/+3
Link failover and synchronization have until now been handled by the links themselves, forcing them to have knowledge about and to access parallel links in order to make the two algorithms work correctly. In this commit, we move the control part of this functionality to the link aggregation level in node.c, which is the right location for this. As a result, the two algorithms become easier to follow, and the link implementation becomes simpler. Tested-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-31tipc: extend node FSMJon Paul Maloy1-4/+10
In the next commit, we will move link synch/failover orchestration to the link aggregation level. In order to do this, we first need to extend the node FSM with two more states, NODE_SYNCHING and NODE_FAILINGOVER, plus four new events to enter and leave those states. This commit introduces this change, without yet making use of it. The node FSM now looks as follows: +-----------------------------------------+ | PEER_DOWN_EVT| | | +------------------------+----------------+ | |SELF_DOWN_EVT | | | | | | | | +-----------+ +-----------+ | | |NODE_ | |NODE_ | | | +----------|FAILINGOVER|<---------|SYNCHING |------------+ | | |SELF_ +-----------+ FAILOVER_+-----------+ PEER_ | | | |DOWN_EVT | A BEGIN_EVT A | DOWN_EVT| | | | | | | | | | | | | | | | | | | | |FAILOVER_|FAILOVER_ |SYNCH_ |SYNCH_ | | | | |END_EVT |BEGIN_EVT |BEGIN_EVT|END_EVT | | | | | | | | | | | | | | | | | | | | | +--------------+ | | | | | +------->| SELF_UP_ |<-------+ | | | | +----------------| PEER_UP |------------------+ | | | | |SELF_DOWN_EVT +--------------+ PEER_DOWN_EVT| | | | | | A A | | | | | | | | | | | | | | PEER_UP_EVT| |SELF_UP_EVT | | | | | | | | | | | V V V | | V V V +------------+ +-----------+ +-----------+ +------------+ |SELF_DOWN_ | |SELF_UP_ | |PEER_UP_ | |PEER_DOWN | |PEER_LEAVING|<------|PEER_COMING| |SELF_COMING|------>|SELF_LEAVING| +------------+ SELF_ +-----------+ +-----------+ PEER_ +------------+ | DOWN_EVT A A DOWN_EVT | | | | | | | | | | SELF_UP_EVT| |PEER_UP_EVT | | | | | | | | | |PEER_DOWN_EVT +--------------+ SELF_DOWN_EVT| +------------------->| SELF_DOWN_ |<--------------------+ | PEER_DOWN | +--------------+ Tested-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-31tipc: move all link_reset() calls to link aggregation levelJon Paul Maloy1-0/+1
In line with our effort to let the node level have full control over its links, we want to move all link reset calls from link.c to node.c. Some of the calls can be moved by simply moving the calling function, when this is the right thing to do. For the remaining calls we use the now established technique of returning a TIPC_LINK_DOWN_EVT flag from tipc_link_rcv(), whereafter we perform the reset call when the call returns. This change serves as a preparation for the coming commits. Tested-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-21tipc: reduce locking scope during packet receptionJon Paul Maloy1-4/+0
We convert packet/message reception according to the same principle we have been using for message sending and timeout handling: We move the function tipc_rcv() to node.c, hence handling the initial packet reception at the link aggregation level. The function grabs the node lock, selects the receiving link, and accesses it via a new call tipc_link_rcv(). This function appends buffers to the input queue for delivery upwards, but it may also append outgoing packets to the xmit queue, just as we do during regular message sending. The latter will happen when buffers are forwarded from the link backlog, or when retransmission is requested. Upon return of this function, and after having released the node lock, tipc_rcv() delivers/tranmsits the contents of those queues, but it may also perform actions such as link activation or reset, as indicated by the return flags from the link. This reduces the number of cpu cycles spent inside the node spinlock, and reduces contention on that lock. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-21tipc: introduce node contact FSMJon Paul Maloy1-7/+21
The logics for determining when a node is permitted to establish and maintain contact with its peer node becomes non-trivial in the presence of multiple parallel links that may come and go independently. A known failure scenario is that one endpoint registers both its links to the peer lost, cleans up it binding table, and prepares for a table update once contact is re-establihed, while the other endpoint may see its links reset and re-established one by one, hence seeing no need to re-synchronize the binding table. To avoid this, a node must not allow re-establishing contact until it has confirmation that even the peer has lost both links. Currently, the mechanism for handling this consists of setting and resetting two state flags from different locations in the code. This solution is hard to understand and maintain. A closer analysis even reveals that it is not completely safe. In this commit we do instead introduce an FSM that keeps track of the conditions for when the node can establish and maintain links. It has six states and four events, and is strictly based on explicit knowledge about the own node's and the peer node's contact states. Only events leading to state change are shown as edges in the figure below. +--------------+ | SELF_UP/ | +---------------->| PEER_COMING |-----------------+ SELF_ | +--------------+ |PEER_ ESTBL_ | | |ESTBL_ CONTACT| SELF_LOST_CONTACT | |CONTACT | v | | +--------------+ | | PEER_ | SELF_DOWN/ | SELF_ | | LOST_ +--| PEER_LEAVING |<--+ LOST_ v +-------------+ CONTACT | +--------------+ | CONTACT +-----------+ | SELF_DOWN/ |<----------+ +----------| SELF_UP/ | | PEER_DOWN |<----------+ +----------| PEER_UP | +-------------+ SELF_ | +--------------+ | PEER_ +-----------+ | LOST_ +--| SELF_LEAVING/|<--+ LOST_ A | CONTACT | PEER_DOWN | CONTACT | | +--------------+ | | A | PEER_ | PEER_LOST_CONTACT | |SELF_ ESTBL_ | | |ESTBL_ CONTACT| +--------------+ |CONTACT +---------------->| PEER_UP/ |-----------------+ | SELF_COMING | +--------------+ Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-21tipc: move link supervision timer to node levelJon Paul Maloy1-0/+2
In our effort to move control of the links to the link aggregation layer, we move the perodic link supervision timer to struct tipc_node. The new timer is shared between all links belonging to the node, thus saving resources, while still kicking the FSM on both its pertaining links at each expiration. The current link timer and corresponding functions are removed. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-21tipc: make media xmit call outside node spinlock contextJon Paul Maloy1-0/+4
Currently, message sending is performed through a deep call chain, where the node spinlock is grabbed and held during a significant part of the transmission time. This is clearly detrimental to overall throughput performance; it would be better if we could send the message after the spinlock has been released. In this commit, we do instead let the call revert on the stack after the buffer chain has been added to the transmission queue, whereafter clones of the buffers are transmitted to the device layer outside the spinlock scope. As a further step in our effort to separate the roles of the node and link entities we also move the function tipc_link_xmit() to node.c, and rename it to tipc_node_xmit(). Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-21tipc: use bearer index when looking up active linksJon Paul Maloy1-11/+15
struct tipc_node currently holds two arrays of link pointers; one, indexed by bearer identity, which contains all links irrespective of current state, and one two-slot array for the currently active link or links. The latter array contains direct pointers into the elements of the former. This has the effect that we cannot know the bearer id of a link when accessing it via the "active_links[]" array without actually dereferencing the pointer, something we want to avoid in some cases. In this commit, we do instead store the bearer identity in the "active_links" array, and use this as an index to find the right element in the overall link entry array. This change should be seen as a preparation for the later commits in this series. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-21tipc: move link input queue to tipc_nodeJon Paul Maloy1-1/+2
At present, the link input queue and the name distributor receive queues are fields aggregated in struct tipc_link. This is a hazard, because a link might be deleted while a receiving socket still keeps reference to one of the queues. This commit fixes this bug. However, rather than adding yet another reference counter to the critical data path, we move the two queues to safe ground inside struct tipc_node, which is already protected, and let the link code only handle references to the queues. This is also in line with planned later changes in this area. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-21tipc: move link creation from neighbor discoverer to nodeJon Paul Maloy1-0/+6
As a step towards turning links into node internal entities, we move the creation of links from the neighbor discovery logics to the node's link control logics. We also create an additional entry for the link's media address in the newly introduced struct tipc_link_entry, since this is where it is needed in the upcoming commits. The current copy in struct tipc_link is kept for now, but will be removed later. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>