summaryrefslogtreecommitdiff
path: root/net/tipc/socket.c
AgeCommit message (Collapse)AuthorFilesLines
2008-07-15tipc: Fix race condition that could cause accept() to failAllan Stephens1-20/+22
This patch ensurs that accept() returns successfully even when the newly created socket is immediately disconnected by its peer. Previously, accept() would fail if it was unable to pass back the optional address info for the socket's peer before the socket became disconnected; TIPC now allows accept() to gather peer address information after disconnection. As a bonus, the revised code accesses the socket's port more efficiently, without the overhead incurred by a reference table lookup. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-15tipc: Optimize pointer dereferencing when receiving stream dataAllan Stephens1-1/+1
This patch eliminates an unnecessary pointer dereference when accessing a stream-based socket's receive queue. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-15tipc: Remove unneeded parameter to tipc_createport_raw()Allan Stephens1-8/+7
This patch eliminates an unneeded parameter when creating a low-level TIPC port object. Instead of returning both the pointer to the port structure and the port's reference ID, it now returns only the pointer since the port structure contains the reference ID as one of its fields. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-13tipc: Fix race condition when creating socket or native portAllan Stephens1-1/+4
This patch eliminates the (very remote) chance of a crash resulting from a partially initialized socket or native port unexpectedly receiving a message. Now, during the creation of a socket or native port, the underlying generic port's lock is not released until all initialization required to handle incoming messages has been done. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-25net: Fix wrong interpretation of some copy_to_user() results.Pavel Emelyanov1-2/+2
I found some places, that erroneously return the value obtained from the copy_to_user() call: if some amount of bytes were not able to get to the user (this is what this one returns) the proper behavior is to return the -EFAULT error, not that number itself. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-15[TIPC]: Overhaul of socket locking logicAllan Stephens1-424/+578
This patch modifies TIPC's socket code to follow the same approach used by other protocols. This change eliminates the need for a mutex in the TIPC-specific portion of the socket protocol data structure -- in its place, the standard Linux socket backlog queue and associated locking routines are utilized. These changes fix a long-standing receive queue bug on SMP systems, and also enable individual read and write threads to utilize a socket without unnecessarily interfering with each other. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-15[TIPC]: Cosmetic changes to TIPC connect() codeAllan Stephens1-71/+72
This patch fixes TIPC's connect routine to conform to Linux kernel style norms of indentation, line length, etc. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-15[TIPC]: Add error check to detect non-blocking form of connect()Allan Stephens1-0/+5
This patch causes TIPC to return an error indication if the non- blocking form of connect() is requested (which TIPC does not yet support). Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-15[TIPC]: Correct "off by 1" error in socket queue limit enforcementAllan Stephens1-12/+10
This patch fixes a bug that allowed TIPC to queue 1 more message than allowed by the socket receive queue threshold limits. The patch also improves the threshold code's logic and naming to help prevent this sort of error from recurring in the future. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-15[TIPC]: Ignore message padding when receiving stream dataAllan Stephens1-1/+1
This patch ensures that padding bytes appearing at the end of an incoming TIPC message are not returned as valid stream data. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-15[TIPC]: Allow stream receive to read from multiple TIPC messagesAllan Stephens1-1/+3
This patch allows a stream socket to receive data from multiple TIPC messages in its receive queue, without requiring the use of the MSG_WAITALL flag. Acknowledgements to Florian Westphal <fw-tipc@strlen.de> for identifying this issue and suggesting how to correct it. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-15[TIPC]: Skip connection flow control in connectionless socketsAllan Stephens1-1/+2
This patch optimizes the receive path for SOCK_DGRAM and SOCK_RDM messages by skipping over code that handles connection-based flow control. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-14[TIPC]: Improve socket time conversionsAllan Stephens1-4/+5
This patch modifies TIPC's socket code to use standard kernel routines to handle time conversions between jiffies and ms. This ensures proper operation even when HZ isn't 1000. Acknowledgements to Eric Sesterhenn <snakebyte@gmx.de> for identifying this issue and proposing a solution. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-14[TIPC]: Remove redundant socket wait queue initializationAllan Stephens1-1/+0
This patch eliminates re-initialization of the standard socket wait queue used for sleeping in TIPC's socket creation code. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-27[TIPC]: Cosmetic cleanup of TIPC polling logicAllan Stephens1-42/+36
This patch eliminates an unnecessary poll-related routine by merging it into TIPC's main polling routine, and updates the comments associated with this code. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-25[NET] NETNS: Omit sock->sk_net without CONFIG_NET_NS.YOSHIFUJI Hideaki1-1/+1
Introduce per-sock inlines: sock_net(), sock_net_set() and per-inet_timewait_sock inlines: twsk_net(), twsk_net_set(). Without CONFIG_NET_NS, no namespace other than &init_net exists. Let's explicitly define them to help compiler optimizations. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-07[TIPC]: Add argument validation for shutdown()Allan Stephens1-2/+3
This patch validates that the "how" argument to shutdown() is SHUT_RDWR, since this is the only form that TIPC supports. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-04[TIPC]: Convert tsock->sem in a mutexMatthias Kaehlcke1-28/+28
The semaphore tsock->sem is used as mutex, convert it to the mutex API Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-08[TIPC]: declare proto_ops structures as 'const'.Florian Westphal1-7/+7
Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-15[TIPC]: Fix semaphore handling.Andrew Morton1-1/+1
As noted by Kevin, tipc's release() does down_interruptible() and ignores the return value. So if signal_pending() we'll end up doing up() on a non-downed semaphore. Fix. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-01[NET]: Forget the zero_it argument of sk_alloc()Pavel Emelyanov1-1/+1
Finally, the zero_it argument can be completely removed from the callers and from the function prototype. Besides, fix the checkpatch.pl warnings about using the assignments inside if-s. This patch is rather big, and it is a part of the previous one. I splitted it wishing to make the patches more readable. Hope this particular split helped. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-11[NET]: Make socket creation namespace safe.Eric W. Biederman1-3/+6
This patch passes in the namespace a new socket should be created in and has the socket code do the appropriate reference counting. By virtue of this all socket create methods are touched. In addition the socket create methods are modified so that they will fail if you attempt to create a socket in a non-default network namespace. Failing if we attempt to create a socket outside of the default network namespace ensures that as we incrementally make the network stack network namespace aware we will not export functionality that someone has not audited and made certain is network namespace safe. Allowing us to partially enable network namespaces before all of the exotic protocols are supported. Any protocol layers I have missed will fail to compile because I now pass an extra parameter into the socket creation code. [ Integrated AF_IUCV build fixes from Andrew Morton... -DaveM ] Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-19[NET] TIPC: Fix whitespace errors.YOSHIFUJI Hideaki1-6/+6
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2007-07-11[TIPC]: Optimize stream send routine to avoid fragmentationAllan Stephens1-8/+17
This patch enhances TIPC's stream socket send routine so that it avoids transmitting data in chunks that require fragmentation and reassembly, thereby improving performance at both the sending and receiving ends of the connection. The "maximum packet size" hint that records MTU info allows the socket to decide how big a chunk it should send; in the event that the hint has become stale, fragmentation may still occur, but the data will be passed correctly and the hint will be updated in time for the following send. Note: The 66060 byte pseudo-MTU used for intra-node connections requires the send routine to perform an additional check to ensure it does not exceed TIPC"s limit of 66000 bytes of user data per chunk. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Jon Paul Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-11[TIPC]: Use standard socket "not implemented" routinesAllan Stephens1-41/+14
This patch modifies TIPC's socket API to utilize existing generic routines to indicate unsupported operations, rather than adding similar TIPC-specific routines. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Jon Paul Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26[SK_BUFF]: Convert skb->tail to sk_buff_data_tArnaldo Carvalho de Melo1-1/+1
So that it is also an offset from skb->head, reduces its size from 8 to 4 bytes on 64bit architectures, allowing us to combine the 4 bytes hole left by the layer headers conversion, reducing struct sk_buff size to 256 bytes, i.e. 4 64byte cachelines, and since the sk_buff slab cache is SLAB_HWCACHE_ALIGN... :-) Many calculations that previously required that skb->{transport,network, mac}_header be first converted to a pointer now can be done directly, being meaningful as offsets or pointers. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-11[NET] TIPC: Fix whitespace errors.YOSHIFUJI Hideaki1-213/+213
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-10-19[TIPC]: Optimize wakeup logic when socket has no waiting processesAllan Stephens1-2/+4
This patch adds a simple test so TIPC doesn't try waking up processes waiting on a socket if there are none waiting. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Per Liden <per.liden@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-10-19[TIPC]: Stream socket can now send > 66000 bytes at a timeAllan Stephens1-1/+6
The stream socket send code was not initializing some required fields of the temporary msghdr structure it was utilizing; this is now fixed. A check has also been added to detect if a user illegally specifies a destination address when sending on an established stream connection. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Per Liden <per.liden@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-10-11[PATCH] tipc __user annotationsAl Viro1-3/+3
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26[TIPC]: Optimized argument validation done by connect().Allan Stephens1-4/+13
Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Per Liden <per.liden@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-26[TIPC]: Simplify code for returning partial success of stream send request.Allan Stephens1-2/+2
Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Per Liden <per.liden@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-26[TIPC]: recvmsg() now returns TIPC ancillary data using correct level (SOL_TIPC)Allan Stephens1-3/+3
Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Per Liden <per.liden@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-26[TIPC]: Improved performance of error checking during socket creation.Allan Stephens1-6/+3
Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Per Liden <per.liden@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-26[TIPC]: Stream socket send indicates partial success if data partially sent.Allan Stephens1-7/+11
Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Per Liden <per.liden@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-26[TIPC]: Connected send now checks socket state when retrying congested send.Allan Stephens1-8/+8
Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Per Liden <per.liden@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-26[TIPC]: Can now return destination name of form {0,x,y} via ancillary data.Allan Stephens1-2/+6
Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Per Liden <per.liden@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-26[TIPC]: Implied connect now saves dest name for retrieval as ancillary data.Allan Stephens1-4/+4
Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Per Liden <per.liden@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-26[TIPC]: Fixed connect() to detect a dest address that is missing or too short.Allan Stephens1-1/+1
Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Per Liden <per.liden@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-26[TIPC]: Non-operation-affecting corrections to comments & function definitions.Allan Stephens1-5/+7
Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Per Liden <per.liden@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-26[TIPC]: Fixed privilege checking typo in dest_name_check().Allan Stephens1-1/+1
This patch originated by Stephane Ouellette <ouellettes@videotron.ca>. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Per Liden <per.liden@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21[TIPC]: Remove inlines from *.cSam Ravnborg1-7/+7
With reference to latest discussions on linux-kernel with respect to inline here is a patch for tipc to remove all inlines as used in the .c files. See also chapter 14 in Documentation/CodingStyle. Before: text data bss dec hex filename 102990 5292 1752 110034 1add2 tipc.o Now: text data bss dec hex filename 101190 5292 1752 108234 1a6ca tipc.o This is a nice text size reduction which will improve icache usage. In some cases bigger (> 4 lines) functions where declared inline and used in many places, they are most probarly no longer inlined by gcc resulting in the size reduction. There are several one liners that no longer are declared inline, but gcc should inline these just fine without the inline hint. With this patch applied one warning is added about an unused static function - that was hidded by utilising inline before. The function in question were kept so this patch is solely a inline removal patch. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Per Liden <per.liden@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21[TIPC]: Fix simple sparse warningsSam Ravnborg1-7/+7
Tried to run the new tipc stack through sparse. Following patch fixes all cases where 0 was used as replacement of NULL. Use NULL to document this is a pointer and to silence sparse. This brough sparse warning count down with 127 to 24 warnings. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Per Liden <per.liden@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-18[TIPC] Avoid polluting the global namespacePer Liden1-5/+5
This patch adds a tipc_ prefix to all externally visible symbols. Signed-off-by: Per Liden <per.liden@ericsson.com>
2006-01-18[TIPC] Remove unused #includesPer Liden1-2/+0
Signed-off-by: Per Liden <per.liden@ericsson.com>
2006-01-13[TIPC] More updates of file headersPer Liden1-1/+1
Updated copyright notice to include the year the file was actually created. Information about file creation dates was extracted from the files in the old CVS repository at tipc.sourceforge.net. Signed-off-by: Per Liden <per.liden@nospam.ericsson.com>
2006-01-13[TIPC] Update of file headersPer Liden1-2/+1
The copyright statements from different parts of Ericsson have been merged into one. Signed-off-by: Per Liden <per.liden@nospam.ericsson.com>
2006-01-13[TIPC] Cleaned up info/warn/err macrosPer Liden1-2/+2
Signed-off-by: Per Liden <per.liden@nospam.ericsson.com>
2006-01-13[TIPC] License header updatePer Liden1-19/+23
The license header in each file now more clearly state that this code is licensed under a dual BSD/GPL. Before this was only evident if you looked at the MODULE_LICENSE line in core.c. Signed-off-by: Per Liden <per.liden@nospam.ericsson.com>
2006-01-13[TIPC] Moved configuration interface into tipc_config.hPer Liden1-0/+1
Restored the old tipc_config.h to get a cleaner division between the interfaces used by normal TIPC users and TIPC administration utilities. Signed-off-by: Per Liden <per.liden@nospam.ericsson.com>