summaryrefslogtreecommitdiff
path: root/net/wireless/mlme.c
AgeCommit message (Collapse)AuthorFilesLines
2021-12-20cfg80211: rename offchannel_chain structs to background_chain to avoid ↵Lorenzo Bianconi1-44/+45
confusion with ETSI standard ETSI standard defines "Offchannel CAC" as: "Off-Channel CAC is performed by a number of non-continuous checks spread over a period in time. This period, which is required to determine the presence of radar signals, is defined as the Off-Channel CAC Time.. Minimum Off-Channel CAC Time 6 minutes and Maximum Off-Channel CAC Time 4 hours..". mac80211 implementation refers to a dedicated hw chain used for continuous radar monitoring. Rename offchannel_* references to background_* in order to avoid confusion with ETSI standard. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/4204cc1d648d76b44557981713231e030a3bd991.1638190762.git.lorenzo@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-11-26cfg80211: allow continuous radar monitoring on offchannel chainLorenzo Bianconi1-7/+13
Allow continuous radar detection on the offchannel chain in order to switch to the monitored channel whenever the underlying driver reports a radar pattern on the main channel. Tested-by: Owen Peng <owen.peng@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/d46217310a49b14ff0e9c002f0a6e0547d70fd2c.1637071350.git.lorenzo@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-11-26cfg80211: schedule offchan_cac_abort_wk in cfg80211_radar_eventLorenzo Bianconi1-6/+10
If necessary schedule offchan_cac_abort_wk work in cfg80211_radar_event routine adding offchan parameter to cfg80211_radar_event signature. Rename cfg80211_radar_event in __cfg80211_radar_event and introduce the two following inline helpers: - cfg80211_radar_event - cfg80211_offchan_radar_event Doing so the drv will not need to run cfg80211_offchan_cac_abort() after radar detection on the offchannel chain. Tested-by: Owen Peng <owen.peng@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/3ff583e021e3343a3ced54a7b09b5e184d1880dc.1637062727.git.lorenzo@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-11-26cfg80211: fix possible NULL pointer dereference in ↵Lorenzo Bianconi1-1/+4
cfg80211_stop_offchan_radar_detection Fix the following NULL pointer dereference in cfg80211_stop_offchan_radar_detection routine that occurs when hostapd is stopped during the CAC on offchannel chain: Sat Jan 1 0[ 779.567851] ESR = 0x96000005 0:12:50 2000 dae[ 779.572346] EC = 0x25: DABT (current EL), IL = 32 bits mon.debug hostap[ 779.578984] SET = 0, FnV = 0 d: hostapd_inter[ 779.583445] EA = 0, S1PTW = 0 face_deinit_free[ 779.587936] Data abort info: : num_bss=1 conf[ 779.592224] ISV = 0, ISS = 0x00000005 ->num_bss=1 Sat[ 779.597403] CM = 0, WnR = 0 Jan 1 00:12:50[ 779.601749] user pgtable: 4k pages, 39-bit VAs, pgdp=00000000418b2000 2000 daemon.deb[ 779.609601] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 ug hostapd: host[ 779.619657] Internal error: Oops: 96000005 [#1] SMP [ 779.770810] CPU: 0 PID: 2202 Comm: hostapd Not tainted 5.10.75 #0 [ 779.776892] Hardware name: MediaTek MT7622 RFB1 board (DT) [ 779.782370] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO BTYPE=--) [ 779.788384] pc : cfg80211_chandef_valid+0x10/0x490 [cfg80211] [ 779.794128] lr : cfg80211_check_station_change+0x3190/0x3950 [cfg80211] [ 779.800731] sp : ffffffc01204b7e0 [ 779.804036] x29: ffffffc01204b7e0 x28: ffffff80039bdc00 [ 779.809340] x27: 0000000000000000 x26: ffffffc008cb3050 [ 779.814644] x25: 0000000000000000 x24: 0000000000000002 [ 779.819948] x23: ffffff8002630000 x22: ffffff8003e748d0 [ 779.825252] x21: 0000000000000cc0 x20: ffffff8003da4a00 [ 779.830556] x19: 0000000000000000 x18: ffffff8001bf7ce0 [ 779.835860] x17: 00000000ffffffff x16: 0000000000000000 [ 779.841164] x15: 0000000040d59200 x14: 00000000000019c0 [ 779.846467] x13: 00000000000001c8 x12: 000636b9e9dab1c6 [ 779.851771] x11: 0000000000000141 x10: 0000000000000820 [ 779.857076] x9 : 0000000000000000 x8 : ffffff8003d7d038 [ 779.862380] x7 : 0000000000000000 x6 : ffffff8003d7d038 [ 779.867683] x5 : 0000000000000e90 x4 : 0000000000000038 [ 779.872987] x3 : 0000000000000002 x2 : 0000000000000004 [ 779.878291] x1 : 0000000000000000 x0 : 0000000000000000 [ 779.883594] Call trace: [ 779.886039] cfg80211_chandef_valid+0x10/0x490 [cfg80211] [ 779.891434] cfg80211_check_station_change+0x3190/0x3950 [cfg80211] [ 779.897697] nl80211_radar_notify+0x138/0x19c [cfg80211] [ 779.903005] cfg80211_stop_offchan_radar_detection+0x7c/0x8c [cfg80211] [ 779.909616] __cfg80211_leave+0x2c/0x190 [cfg80211] [ 779.914490] cfg80211_register_netdevice+0x1c0/0x6d0 [cfg80211] [ 779.920404] raw_notifier_call_chain+0x50/0x70 [ 779.924841] call_netdevice_notifiers_info+0x54/0xa0 [ 779.929796] __dev_close_many+0x40/0x100 [ 779.933712] __dev_change_flags+0x98/0x190 [ 779.937800] dev_change_flags+0x20/0x60 [ 779.941628] devinet_ioctl+0x534/0x6d0 [ 779.945370] inet_ioctl+0x1bc/0x230 [ 779.948849] sock_do_ioctl+0x44/0x200 [ 779.952502] sock_ioctl+0x268/0x4c0 [ 779.955985] __arm64_sys_ioctl+0xac/0xd0 [ 779.959900] el0_svc_common.constprop.0+0x60/0x110 [ 779.964682] do_el0_svc+0x1c/0x24 [ 779.967990] el0_svc+0x10/0x1c [ 779.971036] el0_sync_handler+0x9c/0x120 [ 779.974950] el0_sync+0x148/0x180 [ 779.978259] Code: a9bc7bfd 910003fd a90153f3 aa0003f3 (f9400000) [ 779.984344] ---[ end trace 0e67b4f5d6cdeec7 ]--- [ 779.996400] Kernel panic - not syncing: Oops: Fatal exception [ 780.002139] SMP: stopping secondary CPUs [ 780.006057] Kernel Offset: disabled [ 780.009537] CPU features: 0x0000002,04002004 [ 780.013796] Memory Limit: none Fixes: b8f5facf286b ("cfg80211: implement APIs for dedicated radar detection HW") Reported-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/c2e34c065bf8839c5ffa45498ae154021a72a520.1635958796.git.lorenzo@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-11-19cfg80211: move offchan_cac_event to a dedicated workLorenzo Bianconi1-20/+36
In order to make cfg80211_offchan_cac_abort() (renamed from cfg80211_offchan_cac_event) callable in other contexts and without so much locking restrictions, make it trigger a new work instead of operating directly. Do some other renames while at it to clarify. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/6145c3d0f30400a568023f67981981d24c7c6133.1635325205.git.lorenzo@kernel.org [rewrite commit log] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-11-19cfg80211: implement APIs for dedicated radar detection HWLorenzo Bianconi1-0/+113
If a dedicated (off-channel) radar detection hardware (chain) is available in the hardware/driver, allow this to be used by calling the NL80211_CMD_RADAR_DETECT command with a new flag attribute requesting off-channel radar detection is used. Offchannel CAC (channel availability check) avoids the CAC downtime when switching to a radar channel or when turning on the AP. Drivers advertise support for this using the new feature flag NL80211_EXT_FEATURE_RADAR_OFFCHAN. Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/7468e291ef5d05d692c1738d25b8f778d8ea5c3f.1634979655.git.lorenzo@kernel.org Link: https://lore.kernel.org/r/1e60e60fef00e14401adae81c3d49f3e5f307537.1634979655.git.lorenzo@kernel.org Link: https://lore.kernel.org/r/85fa50f57fc3adb2934c8d9ca0be30394de6b7e8.1634979655.git.lorenzo@kernel.org Link: https://lore.kernel.org/r/4b6c08671ad59aae0ac46fc94c02f31b1610eb72.1634979655.git.lorenzo@kernel.org Link: https://lore.kernel.org/r/241849ccaf2c228873c6f8495bf87b19159ba458.1634979655.git.lorenzo@kernel.org [remove offchan_mutex, fix cfg80211_stop_offchan_radar_detection(), remove gfp_t argument, fix documentation, fix tracing] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-10-25cfg80211: fix management registrations lockingJohannes Berg1-12/+14
The management registrations locking was broken, the list was locked for each wdev, but cfg80211_mgmt_registrations_update() iterated it without holding all the correct spinlocks, causing list corruption. Rather than trying to fix it with fine-grained locking, just move the lock to the wiphy/rdev (still need the list on each wdev), we already need to hold the wdev lock to change it, so there's no contention on the lock in any case. This trivially fixes the bug since we hold one wdev's lock already, and now will hold the lock that protects all lists. Cc: stable@vger.kernel.org Reported-by: Jouni Malinen <j@w1.fi> Fixes: 6cd536fe62ef ("cfg80211: change internal management frame registration API") Link: https://lore.kernel.org/r/20211025133111.5cf733eab0f4.I7b0abb0494ab712f74e2efcd24bb31ac33f7eee9@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-01-26cfg80211: avoid holding the RTNL when calling the driverJohannes Berg1-3/+3
Currently, _everything_ in cfg80211 holds the RTNL, and if you have a slow USB device (or a few) you can get some bad lock contention on that. Fix that by re-adding a mutex to each wiphy/rdev as we had at some point, so we have locking for the wireless_dev lists and all the other things in there, and also so that drivers still don't have to worry too much about it (they still won't get parallel calls for a single device). Then, we can restrict the RTNL to a few cases where we add or remove interfaces and really need the added protection. Some of the global list management still also uses the RTNL, since we need to have it anyway for netdev management, but we only hold the RTNL for very short periods of time here. Link: https://lore.kernel.org/r/20210122161942.81df9f5e047a.I4a8e1a60b18863ea8c5e6d3a0faeafb2d45b2f40@changeid Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> [marvell driver issues] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11cfg80211: support immediate reconnect request hintJohannes Berg1-11/+15
There are cases where it's necessary to disconnect, but an immediate reconnection is desired. Support a hint to userspace that this is the case, by including a new attribute in the deauth or disassoc event. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201206145305.58d33941fb9d.I0e7168c205c7949529c8e3b86f3c9b12c01a7017@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28cfg80211: handle Association Response from S1G STAThomas Pedersen1-3/+11
The sending STA type is implicit based on beacon or probe response content. If sending STA was an S1G STA, adjust the Information Element location accordingly. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-9-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-08-27net: wireless: Convert to use the preferred fallthrough macroMiaohe Lin1-1/+1
Convert the uses of fallthrough comments to fallthrough macro. Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Link: https://lore.kernel.org/r/20200822082323.45495-1-linmiaohe@huawei.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-06-05cfg80211: fix management registrations deadlockJohannes Berg1-5/+21
Lockdep reports that we may deadlock because we take the RTNL on the work struct, but flush it under RTNL. Clearly, it's correct. In practice, this can happen when doing rfkill on an active device. Fix this by moving the work struct to the wiphy (registered dev) layer, and iterate over all the wdevs inside there. This then means we need to track which one of them has work to do, so we don't update to the driver for all wdevs all the time. Also fix a locking bug I noticed while working on this - the registrations list is iterated as if it was an RCU list, but it isn't handle that way - and we need to lock now for the update flag anyway, so remove the RCU. Fixes: 6cd536fe62ef ("cfg80211: change internal management frame registration API") Reported-by: Markus Theil <markus.theil@tu-ilmenau.de> Reported-and-tested-by: Kenneth R. Crudup <kenny@panix.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20200604120420.b1dc540a7e26.I55dcca56bb5bdc5d7ad66a36a0b42afd7034d8be@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-27cfg80211: add KHz variants of frame RX APIThomas Pedersen1-3/+3
Drivers may wish to report the RX frequency in units of KHz. Provide cfg80211_rx_mgmt_khz() and wrap it with cfg80211_rx_mgmt() so exisiting drivers which can't report KHz anyway don't need to change. Add a similar wrapper for cfg80211_report_obss_beacon() so the frequency units stay somewhat consistent. This doesn't actually change the nl80211 API yet. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200430172554.18383-2-thomas@adapt-ip.com [fix mac80211 calling the non-khz version of obss beacon report, drop trace point name changes] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-24cfg80211: support multicast RX registrationJohannes Berg1-8/+30
For DPP, there's a need to receive multicast action frames, but many drivers need a special filter configuration for this. Support announcing from userspace in the management registration that multicast RX is required, with an extended feature flag if the driver handles this. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Link: https://lore.kernel.org/r/20200417124013.c46238801048.Ib041d437ce0bff28a0c6d5dc915f68f1d8591002@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-24cfg80211: change internal management frame registration APIJohannes Berg1-43/+29
Almost all drivers below cfg80211 get the API wrong (except for cfg80211) and are unable to cope with multiple registrations for the same frame type, which is valid due to the match filter. This seems to indicate the API is wrong, and we should maintain the full information in cfg80211 instead of the drivers. Change the API to no longer inform the driver about individual registrations and unregistrations, but rather every time about the entire state of the entire wiphy and single wdev, whenever it may have changed. This also simplifies the code in cfg80211 as it no longer has to track exactly what was unregistered and can free things immediately. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Reviewed-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Link: https://lore.kernel.org/r/20200417124300.f47f3828afc8.I7f81ef59c2c5a340d7075fb3c6d0e08e8aeffe07@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-07cfg80211/mac80211: Allow user space to register for station Rx authenticationIlan Peer1-4/+29
To support Pre Association Security Negotiation (PASN) while already associated to one AP, allow user space to register to Rx authentication frames, so that the user space logic would be able to receive/handle authentication frames from a different AP as part of PASN. Note that it is expected that user space would intelligently register for Rx authentication frames, i.e., only when PASN is used and configure a match filter only for PASN authentication algorithm, as otherwise the MLME functionality of mac80211 would be broken. Additionally, since some versions of the user space daemons wrongly register to all types of authentication frames (which might result in unexpected behavior) allow such registration if the request is for a specific authentication algorithm number. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20200131114529.894206-1-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-22cfg80211: Report Association Request frame IEs in association eventsJouni Malinen1-2/+6
This extends the NL80211_CMD_ASSOCIATE event case to report NL80211_ATTR_REQ_IE similarly to what is already done with the NL80211_CMD_CONNECT events if the driver provides this information. In practice, this adds (Re)Association Request frame information element reporting to mac80211 drivers for the cases where user space SME is used. This provides more information for user space to figure out which capabilities were negotiated for the association. For example, this can be used to determine whether HT, VHT, or HE is used. Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-11-09cfg80211: add missing constraint for user-supplied VHT maskSergey Matyukevich1-2/+2
Do a logical vht_capa &= vht_capa_mask of user-supplied VHT mask with the driver-supplied mask of modifiable VHT capabilities. Fix whitespaces and comment typos. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-03-29cfg80211: fix CAC_STARTED event handlingDmitry Lebed1-1/+1
Exclude CAC_STARTED event from !wdev->cac_started check, since cac_started will be set later in the same function. Signed-off-by: Dmitry Lebed <dlebed@quantenna.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-03-21cfg80211/nl80211: add CAC_STARTED eventDmitry Lebed1-2/+5
CAC_STARTED event is needed for DFS offload feature and should be generated by driver/HW if DFS_OFFLOAD is enabled. Signed-off-by: Dmitry Lebed <dlebed@quantenna.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-12-11cfg80211: cleanup signal strength units notationSergey Matyukevich1-3/+3
Both cfg80211_rx_mgmt and cfg80211_report_obss_beacon functions send reports to userspace using NL80211_ATTR_RX_SIGNAL_DBM attribute w/o any processing of their input signal values. Which means that in order to match userspace tools expectations, input signal values for those functions are supposed to be in dBm units. This patch cleans up comments, variable names, and trace reports for those functions, replacing confusing 'mBm' by 'dBm'. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-31cfg80211: Use a structure to pass connect response paramsVidyullatha Kanchanapally1-8/+12
Currently the connect event from driver takes all the connection response parameters as arguments. With support for new features these response parameters can grow. Use a structure to pass these parameters rather than passing them as function arguments. Signed-off-by: Vidyullatha Kanchanapally <vkanchan@qti.qualcomm.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> [add to documentation] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-03-06cfg80211: Share Channel DFS state across wiphys of same DFS domainVasanthakumar Thiagarajan1-0/+10
Sharing DFS channel state across multiple wiphys (radios) could be useful with multiple radios on the system. When one radio completes CAC and markes the channel available another radio can use this information and start beaconing without really doing CAC. Whenever there is a state change in dfs channel associated to a particular wiphy the the same state change is propagated to other wiphys having the same DFS reg domain configuration. Also when a new wiphy is created the dfs channel state of other existing wiphys of same DFS domain is copied. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-03-06cfg80211: Make pre-CAC results valid only for ETSI domainVasanthakumar Thiagarajan1-9/+31
DFS requirement for ETSI domain (section 4.7.1.4 in ETSI EN 301 893 V1.8.1) is the only one which explicitly states that once DFS channel is marked as available afer the CAC, this channel will remain in available state even moving to a different operating channel. But the same is not explicitly stated in FCC DFS requirement. Also, Pre-CAC requriements are not explicitly mentioned in FCC requirement. Current implementation in keeping DFS channel in available state is same as described in ETSI domain. For non-ETSI DFS domain, this patch gives a grace period of 2 seconds since the completion of successful CAC before moving the channel's DFS state to 'usable' from 'available' state. The same grace period is checked against the channel's dfs_state_entered timestamp while deciding if a DFS channel is available for operation. There is a new radar event, NL80211_RADAR_PRE_CAC_EXPIRED, reported when DFS channel is moved from available to usable state after the grace period. Also make sure the DFS channel state is reset to usable once the beaconing operation on that channel is brought down (like stop_ap, leave_ibss and leave_mesh) in non-ETSI domain. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-01-13cfg80211: Specify the reason for connect timeoutPurushottam Kushwaha1-1/+2
This enhances the connect timeout API to also carry the reason for the timeout. These reason codes for the connect time out are represented by enum nl80211_timeout_reason and are passed to user space through a new attribute NL80211_ATTR_TIMEOUT_REASON (u32). Signed-off-by: Purushottam Kushwaha <pkushwah@qti.qualcomm.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> [keep gfp_t argument last] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-01-13cfg80211: Add support for randomizing TA of Public Action framesvamsi krishna1-2/+19
Add support to use a random local address (Address 2 = TA in transmit and the same address in receive functionality) for Public Action frames in order to improve privacy of WLAN clients. Applications fill the random transmit address in the frame buffer in the NL80211_CMD_FRAME command. This can be used only with the drivers that indicate support for random local address by setting the new NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA and/or NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA_CONNECTED in ext_features. The driver needs to configure receive behavior to accept frames to the specified random address during the time the frame exchange is pending and such frames need to be acknowledged similarly to frames sent to the local permanent address when this random address functionality is not used. Signed-off-by: vamsi krishna <vamsin@qti.qualcomm.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-01-09cfg80211: NL80211_ATTR_SOCKET_OWNER support for CMD_CONNECTAndrzej Zaborowski1-0/+5
Disconnect or deauthenticate when the owning socket is closed if this flag is supplied to CMD_CONNECT or CMD_ASSOCIATE. This may be used to ensure userspace daemon doesn't leave an unmanaged connection behind. In some situations it would be possible to account for that, to some degree, in the deamon restart code or in the up/down scripts without the use of this attribute. But there will be systems where the daemon can go away for varying periods without a warning due to local resource management. Signed-off-by: Andrew Zaborowski <andrew.zaborowski@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-12-09cfg80211/mac80211: fix BSS leaks when abandoning assoc attemptsJohannes Berg1-0/+12
When mac80211 abandons an association attempt, it may free all the data structures, but inform cfg80211 and userspace about it only by sending the deauth frame it received, in which case cfg80211 has no link to the BSS struct that was used and will not cfg80211_unhold_bss() it. Fix this by providing a way to inform cfg80211 of this with the BSS entry passed, so that it can clean up properly, and use this ability in the appropriate places in mac80211. This isn't ideal: some code is more or less duplicated and tracing is missing. However, it's a fairly small change and it's thus easier to backport - cleanups can come later. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-10-27cfg80211: Rename SAE_DATA to more generic AUTH_DATAJouni Malinen1-3/+3
This adds defines and nl80211 extensions to allow FILS Authentication to be implemented similarly to SAE. FILS does not need the special rules for the Authentication transaction number and Status code fields, but it does need to add non-IE fields. The previously used NL80211_ATTR_SAE_DATA can be reused for this to avoid having to duplicate that implementation. Rename that attribute to more generic NL80211_ATTR_AUTH_DATA (with backwards compatibility define for NL80211_SAE_DATA). Also document the special rules related to the Authentication transaction number and Status code fiels. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-09-30cfg80211: add start / stop NAN commandsAyala Beker1-0/+1
This allows user space to start/stop NAN interface. A NAN interface is like P2P device in a few aspects: it doesn't have a netdev associated to it. Add the new interface type and prevent operations that can't be executed on NAN interface like scan. Define several attributes that may be configured by user space when starting NAN functionality (master preference and dual band operation) Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-09-13cfg80211: disallow shared key authentication with key index 4Johannes Berg1-1/+1
Key index 4 can only be used for an IGTK, so the range checks for shared key authentication should treat 4 as an error, fix that in the code. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-12cfg80211: remove enum ieee80211_bandJohannes Berg1-1/+1
This enum is already perfectly aliased to enum nl80211_band, and the only reason for it is that we get IEEE80211_NUM_BANDS out of it. There's no really good reason to not declare the number of bands in nl80211 though, so do that and remove the cfg80211 one. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-01-14cfg80211/mac80211: use to_delayed_workGeliang Tang1-2/+1
Use to_delayed_work() instead of open-coding it. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17cfg80211: allow mgmt_frame_register callback to sleepJohannes Berg1-15/+60
This callback is currently not allowed to sleep, which makes it more difficult to implement proper driver methods in mac80211 than it has to be. Instead of doing asynchronous work here in mac80211, make it possible for the callback to sleep by doing some asynchronous work in cfg80211. This also enables improvements to other drivers, like ath6kl, that would like to sleep in this callback. While at it, also fix the code to call the driver on the implicit unregistration when an interface is removed, and do that also when a P2P-Device wdev is destroyed (otherwise we leak the structs.) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-03cfg80211: add bss_type and privacy arguments in cfg80211_get_bss()Dedy Lansky1-2/+4
802.11ad adds new a network type (PBSS) and changes the capability field interpretation for the DMG (60G) band. The same 2 bits that were interpreted as "ESS" and "IBSS" before are re-used as a 2-bit field with 3 valid values (and 1 reserved). Valid values are: "IBSS", "PBSS" (new) and "AP". In order to get the BSS struct for the new PBSS networks, change the cfg80211_get_bss() function to take a new enum ieee80211_bss_type argument with the valid network types, as "capa_mask" and "capa_val" no longer work correctly (the search must be band-aware now.) The remaining bits in "capa_mask" and "capa_val" are used only for privacy matching so replace those two with a privacy enum as well. Signed-off-by: Dedy Lansky <dlansky@codeaurora.org> [rewrite commit log, tiny fixes] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-09-11cfg80211/mac80211: add wmm info to assoc eventEliad Peller1-2/+2
Userspace might need to know what queues are configured for uapsd (e.g. for setting proper default values in tspecs). Add this bitmap to the association event (inside wmm nested attribute) Add additional parameter to cfg80211_rx_assoc_resp, and update its callers. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-08-26cfg80211: remove @gfp parameter from cfg80211_rx_mgmt()Vladimir Kondratiev1-2/+2
In the cfg80211_rx_mgmt(), parameter @gfp was used for the memory allocation. But, memory get allocated under spin_lock_bh(), this implies atomic context. So, one can't use GFP_KERNEL, only variants with no __GFP_WAIT. Actually, in all occurrences GFP_ATOMIC is used (wil6210 use GFP_KERNEL by mistake), and it should be this way or warning triggered in the memory allocation code. Remove @gfp parameter as no actual choice exist, and use hard coded GFP_ATOMIC for memory allocation. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-25cfg80211: change wiphy_to_dev function nameZhao, Gang1-12/+12
Name wiphy_to_rdev is more accurate to describe what the function does, i.e., return a pointer pointing to struct cfg80211_registered_device. Signed-off-by: Zhao, Gang <gamerh2o@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-09cfg80211/mac80211: move interface counting for combination check to mac80211Luciano Coelho1-13/+1
Move the counting part of the interface combination check from cfg80211 to mac80211. This is needed to simplify locking when the driver has to perform a combination check by itself (eg. with channel-switch). Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-25cfg80211: DFS get CAC time from regulatory databaseJanusz Dziedzic1-1/+1
Send Channel Availability Check time as a parameter of start_radar_detection() callback. Get CAC time from regulatory database. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-05cfg80211: consider existing DFS interfacesMichal Kazior1-1/+1
It was possible to break interface combinations in the following way: combo 1: iftype = AP, num_ifaces = 2, num_chans = 2, combo 2: iftype = AP, num_ifaces = 1, num_chans = 1, radar = HT20 With the above interface combinations it was possible to: step 1. start AP on DFS channel by matching combo 2 step 2. start AP on non-DFS channel by matching combo 1 This was possible beacuse (step 2) did not consider if other interfaces require radar detection. The patch changes how cfg80211 tracks channels - instead of channel itself now a complete chandef is stored. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-02cfg80211: aggregate mgmt_tx parameters into a structAndrei Otcheretianski1-8/+4
Change cfg80211 and mac80211 to use cfg80211_mgmt_tx_params struct to aggregate parameters for mgmt_tx functions. This makes the functions' signatures less clumsy and allows less painful parameters extension. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> [fix all other drivers] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25cfg80211/mac80211: DFS setup chandef for cac eventJanusz Dziedzic1-5/+3
To report channel width correctly we have to send correct channel parameters from mac80211 when calling cfg80211_cac_event(). This is required in case of using channel width higher than 20MHz and we have to set correct dfs channel state after CAC (NL80211_DFS_AVAILABLE). Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Reviewed-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-21cfg80211: update dfs_state_entered upon dfs_state changeMichal Kazior1-0/+2
The timestamp wasn't updated after transitioning to the NL80211_DFS_USABLE state after NOP time. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-21cfg80211: fix DFS channel recovery timeoutMichal Kazior1-2/+2
The timeout was not properly converted from msecs to jiffies. As a result channel transition to NL80211_DFS_USABLE was delayed depending on CONFIG_HZ configuration, e.g. HZ=100 would delay the NOP from 30 minutes to 300 minutes. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-23cfg80211: add flags to cfg80211_rx_mgmt()Vladimir Kondratiev1-2/+2
Add flags intended to report various auxiliary information and introduce the NL80211_RXMGMT_FLAG_ANSWERED flag to report that the frame was already answered by the device. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> [REPLIED->ANSWERED, reword commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-19cfg80211: hold BSS over association processJohannes Berg1-0/+4
This fixes the potential issue that the BSS struct that we use and later assign to wdev->current_bss is removed from the scan list while associating. Also warn when we don't have a BSS struct in connect_result unless it's from a driver that only has the connect() API. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-19cfg80211: require passing BSS struct back to cfg80211_assoc_timeoutJohannes Berg1-3/+5
Doing so will allow us to hold the BSS (not just ref it) over the association process, thus ensuring that it doesn't time out and gets invisible to the user (e.g. in 'iw wlan0 link'.) This also fixes a leak in mac80211 where it doesn't always release the BSS struct properly in all cases where calling this function. This leak was reported by Ben Greear. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-04cfg80211: separate internal SME implementationJohannes Berg1-131/+60
The current internal SME implementation in cfg80211 is very mixed up with the MLME handling, which has been causing issues for a long time. There are three things that the implementation has to provide: * a basic SME implementation for nl80211's connect() call (for drivers implementing auth/assoc, which is really just mac80211) and wireless extensions * MLME events for the userspace SME * SME events (connected, disconnected etc.) for all different SME implementation possibilities (driver, cfg80211 and userspace) To achieve these goals it isn't necessary to track the software SME's connection status outside of it's state (which is the part that caused many issues.) Instead, track it only in the SME data (wdev->conn) and in the general case only track whether the wdev is connected or not (via wdev->current_bss.) Also separate the internal implementation to not have callbacks from the SME events, but rather call it from the API functions that the driver (or rather mac80211) calls. This separates the code better. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-11 05:09:42 +0300