summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2023-02-20rxrpc: Fix overproduction of wakeups to recvmsg()David Howells2-2/+16
Fix three cases of overproduction of wakeups: (1) rxrpc_input_split_jumbo() conditionally notifies the app that there's data for recvmsg() to collect if it queues some data - and then its only caller, rxrpc_input_data(), goes and wakes up recvmsg() anyway. Fix the rxrpc_input_data() to only do the wakeup in failure cases. (2) If a DATA packet is received for a call by the I/O thread whilst recvmsg() is busy draining the call's rx queue in the app thread, the call will left on the recvmsg() queue for recvmsg() to pick up, even though there isn't any data on it. This can cause an unexpected recvmsg() with a 0 return and no MSG_EOR set after the reply has been posted to a service call. Fix this by discarding pending calls from the recvmsg() queue that don't need servicing yet. (3) Not-yet-completed calls get requeued after having data read from them, even if they have no data to read. Fix this by only requeuing them if they have data waiting on them; if they don't, the I/O thread will requeue them when data arrives or they fail. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/3386149.1676497685@warthog.procyon.org.uk Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-18ieee802154: Drop device trackersMiquel Raynal1-20/+4
In order to prevent a device from disappearing when a background job was started, dev_hold() and dev_put() calls were made. During the stabilization phase of the scan/beacon features, it was later decided that removing the device while a background job was ongoing was a valid use case, and we should instead stop the background job and then remove the device, rather than prevent the device from being removed. This is what is currently done, which means manually reference counting the device during background jobs is no longer needed. Fixes: ed3557c947e1 ("ieee802154: Add support for user scanning requests") Fixes: 9bc114504b07 ("ieee802154: Add support for user beaconing requests") Reported-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20230214135035.1202471-7-miquel.raynal@bootlin.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2023-02-18mac802154: Fix an always true conditionMiquel Raynal1-3/+2
At this stage we simply do not care about the delayed work value, because active scan is not yet supported, so we can blindly queue another work once a beacon has been sent. It fixes a smatch warning: mac802154_beacon_worker() warn: always true condition '(local->beacon_interval >= 0) => (0-u32max >= 0)' Fixes: 3accf4762734 ("mac802154: Handle basic beaconing") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20230214135035.1202471-6-miquel.raynal@bootlin.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2023-02-18mac802154: Send beacons using the MLME Tx pathMiquel Raynal1-1/+19
Using ieee802154_subif_start_xmit() to bypass the net queue when sending beacons is broken because it does not acquire the HARD_TX_LOCK(), hence not preventing datagram buffers to be smashed by beacons upon contention situation. Using the mlme_tx helper is not the best fit either but at least it is not buggy and has little-to-no performance hit. More details are given in the comment explaining this choice in the code. Fixes: 3accf4762734 ("mac802154: Handle basic beaconing") Reported-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20230214135035.1202471-5-miquel.raynal@bootlin.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2023-02-18ieee802154: Change error code on monitor scan netlink requestMiquel Raynal1-1/+1
Returning EPERM gives the impression that "right now" it is not possible, but "later" it could be, while what we want to express is the fact that this is not currently supported at all (might change in the future). So let's return EOPNOTSUPP instead. Fixes: ed3557c947e1 ("ieee802154: Add support for user scanning requests") Suggested-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20230214135035.1202471-4-miquel.raynal@bootlin.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2023-02-18ieee802154: Convert scan error messages to extackMiquel Raynal1-6/+13
Instead of printing error messages in the kernel log, let's use extack. When there is a netlink error returned that could be further specified with a string, use extack as well. Apply this logic to the very recent scan/beacon infrastructure. Fixes: ed3557c947e1 ("ieee802154: Add support for user scanning requests") Fixes: 9bc114504b07 ("ieee802154: Add support for user beaconing requests") Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20230214135035.1202471-3-miquel.raynal@bootlin.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2023-02-18ieee802154: Use netlink policies when relevant on scan parametersMiquel Raynal1-56/+28
Instead of open-coding scan parameters (page, channels, duration, etc), let's use the existing NLA_POLICY* macros. This help greatly reducing the error handling and clarifying the overall logic. Fixes: ed3557c947e1 ("ieee802154: Add support for user scanning requests") Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20230214135035.1202471-2-miquel.raynal@bootlin.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2023-02-18bpf: Add BPF_FIB_LOOKUP_SKIP_NEIGH for bpf_fib_lookupMartin KaFai Lau1-13/+26
The bpf_fib_lookup() also looks up the neigh table. This was done before bpf_redirect_neigh() was added. In the use case that does not manage the neigh table and requires bpf_fib_lookup() to lookup a fib to decide if it needs to redirect or not, the bpf prog can depend only on using bpf_redirect_neigh() to lookup the neigh. It also keeps the neigh entries fresh and connected. This patch adds a bpf_fib_lookup flag, SKIP_NEIGH, to avoid the double neigh lookup when the bpf prog always call bpf_redirect_neigh() to do the neigh lookup. The params->smac output is skipped together when SKIP_NEIGH is set because bpf_redirect_neigh() will figure out the smac also. Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20230217205515.3583372-1-martin.lau@linux.dev
2023-02-17Revert "bpf, test_run: fix &xdp_frame misplacement for LIVE_FRAMES"Martin KaFai Lau1-23/+6
This reverts commit 6c20822fada1b8adb77fa450d03a0d449686a4a9. build bot failed on arch with different cache line size: https://lore.kernel.org/bpf/50c35055-afa9-d01e-9a05-ea5351280e4f@intel.com/ Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2023-02-17bpf: bpf_fib_lookup should not return neigh in NUD_FAILED stateMartin KaFai Lau1-2/+2
The bpf_fib_lookup() helper does not only look up the fib (ie. route) but it also looks up the neigh. Before returning the neigh, the helper does not check for NUD_VALID. When a neigh state (neigh->nud_state) is in NUD_FAILED, its dmac (neigh->ha) could be all zeros. The helper still returns SUCCESS instead of NO_NEIGH in this case. Because of the SUCCESS return value, the bpf prog directly uses the returned dmac and ends up filling all zero in the eth header. This patch checks for NUD_VALID and returns NO_NEIGH if the neigh is not valid. Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20230217004150.2980689-3-martin.lau@linux.dev
2023-02-17bpf: Disable bh in bpf_test_run for xdp and tc progMartin KaFai Lau1-0/+2
Some of the bpf helpers require bh disabled. eg. The bpf_fib_lookup helper that will be used in a latter selftest. In particular, it calls ___neigh_lookup_noref that expects the bh disabled. This patch disables bh before calling bpf_prog_run[_xdp], so the testing prog can also use those helpers. Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20230217004150.2980689-2-martin.lau@linux.dev
2023-02-17xsk: check IFF_UP earlier in Tx pathMaciej Fijalkowski1-26/+33
Xsk Tx can be triggered via either sendmsg() or poll() syscalls. These two paths share a call to common function xsk_xmit() which has two sanity checks within. A pseudo code example to show the two paths: __xsk_sendmsg() : xsk_poll(): if (unlikely(!xsk_is_bound(xs))) if (unlikely(!xsk_is_bound(xs))) return -ENXIO; return mask; if (unlikely(need_wait)) (...) return -EOPNOTSUPP; xsk_xmit() mark napi id (...) xsk_xmit() xsk_xmit(): if (unlikely(!(xs->dev->flags & IFF_UP))) return -ENETDOWN; if (unlikely(!xs->tx)) return -ENOBUFS; As it can be observed above, in sendmsg() napi id can be marked on interface that was not brought up and this causes a NULL ptr dereference: [31757.505631] BUG: kernel NULL pointer dereference, address: 0000000000000018 [31757.512710] #PF: supervisor read access in kernel mode [31757.517936] #PF: error_code(0x0000) - not-present page [31757.523149] PGD 0 P4D 0 [31757.525726] Oops: 0000 [#1] PREEMPT SMP NOPTI [31757.530154] CPU: 26 PID: 95641 Comm: xdpsock Not tainted 6.2.0-rc5+ #40 [31757.536871] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [31757.547457] RIP: 0010:xsk_sendmsg+0xde/0x180 [31757.551799] Code: 00 75 a2 48 8b 00 a8 04 75 9b 84 d2 74 69 8b 85 14 01 00 00 85 c0 75 1b 48 8b 85 28 03 00 00 48 8b 80 98 00 00 00 48 8b 40 20 <8b> 40 18 89 85 14 01 00 00 8b bd 14 01 00 00 81 ff 00 01 00 00 0f [31757.570840] RSP: 0018:ffffc90034f27dc0 EFLAGS: 00010246 [31757.576143] RAX: 0000000000000000 RBX: ffffc90034f27e18 RCX: 0000000000000000 [31757.583389] RDX: 0000000000000001 RSI: ffffc90034f27e18 RDI: ffff88984cf3c100 [31757.590631] RBP: ffff88984714a800 R08: ffff88984714a800 R09: 0000000000000000 [31757.597877] R10: 0000000000000001 R11: 0000000000000000 R12: 00000000fffffffa [31757.605123] R13: 0000000000000000 R14: 0000000000000003 R15: 0000000000000000 [31757.612364] FS: 00007fb4c5931180(0000) GS:ffff88afdfa00000(0000) knlGS:0000000000000000 [31757.620571] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [31757.626406] CR2: 0000000000000018 CR3: 000000184b41c003 CR4: 00000000007706e0 [31757.633648] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [31757.640894] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [31757.648139] PKRU: 55555554 [31757.650894] Call Trace: [31757.653385] <TASK> [31757.655524] sock_sendmsg+0x8f/0xa0 [31757.659077] ? sockfd_lookup_light+0x12/0x70 [31757.663416] __sys_sendto+0xfc/0x170 [31757.667051] ? do_sched_setscheduler+0xdb/0x1b0 [31757.671658] __x64_sys_sendto+0x20/0x30 [31757.675557] do_syscall_64+0x38/0x90 [31757.679197] entry_SYSCALL_64_after_hwframe+0x72/0xdc [31757.687969] Code: 8e f6 ff 44 8b 4c 24 2c 4c 8b 44 24 20 41 89 c4 44 8b 54 24 28 48 8b 54 24 18 b8 2c 00 00 00 48 8b 74 24 10 8b 7c 24 08 0f 05 <48> 3d 00 f0 ff ff 77 3a 44 89 e7 48 89 44 24 08 e8 b5 8e f6 ff 48 [31757.707007] RSP: 002b:00007ffd49c73c70 EFLAGS: 00000293 ORIG_RAX: 000000000000002c [31757.714694] RAX: ffffffffffffffda RBX: 000055a996565380 RCX: 00007fb4c5727c16 [31757.721939] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003 [31757.729184] RBP: 0000000000000040 R08: 0000000000000000 R09: 0000000000000000 [31757.736429] R10: 0000000000000040 R11: 0000000000000293 R12: 0000000000000000 [31757.743673] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [31757.754940] </TASK> To fix this, let's make xsk_xmit a function that will be responsible for generic Tx, where RCU is handled accordingly and pull out sanity checks and xs->zc handling. Populate sanity checks to __xsk_sendmsg() and xsk_poll(). Fixes: ca2e1a627035 ("xsk: Mark napi_id on sendmsg()") Fixes: 18b1ab7aa76b ("xsk: Fix race at socket teardown") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Link: https://lore.kernel.org/r/20230215143309.13145-1-maciej.fijalkowski@intel.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2023-02-17netfilter: let reset rules clean out conntrack entriesFlorian Westphal5-0/+65
iptables/nftables support responding to tcp packets with tcp resets. The generated tcp reset packet passes through both output and postrouting netfilter hooks, but conntrack will never see them because the generated skb has its ->nfct pointer copied over from the packet that triggered the reset rule. If the reset rule is used for established connections, this may result in the conntrack entry to be around for a very long time (default timeout is 5 days). One way to avoid this would be to not copy the nf_conn pointer so that the rest packet passes through conntrack too. Problem is that output rules might not have the same conntrack zone setup as the prerouting ones, so its possible that the reset skb won't find the correct entry. Generating a template entry for the skb seems error prone as well. Add an explicit "closing" function that switches a confirmed conntrack entry to closed state and wire this up for tcp. If the entry isn't confirmed, no action is needed because the conntrack entry will never be committed to the table. Reported-by: Russel King <linux@armlinux.org.uk> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2023-02-17Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/netDavid S. Miller16-37/+51
Some of the devlink bits were tricky, but I think I got it right. Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-16Merge tag 'wireless-next-2023-03-16' of ↵Jakub Kicinski21-439/+1021
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Johannes Berg says: ==================== Major stack changes: * EHT channel puncturing support (client & AP) * some support for AP MLD without mac80211 * fixes for A-MSDU on mesh connections Major driver changes: iwlwifi * EHT rate reporting * Bump FW API to 74 for AX devices * STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware mt76 * switch to using page pool allocator * mt7996 EHT (Wi-Fi 7) support * Wireless Ethernet Dispatch (WED) reset support libertas * WPS enrollee support brcmfmac * Rename Cypress 89459 to BCM4355 * BCM4355 and BCM4377 support mwifiex * SD8978 chipset support rtl8xxxu * LED support ath12k * new driver for Qualcomm Wi-Fi 7 devices ath11k * IPQ5018 support * Fine Timing Measurement (FTM) responder role support * channel 177 support ath10k * store WLAN firmware version in SMEM image table * tag 'wireless-next-2023-03-16' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (207 commits) wifi: brcmfmac: p2p: Introduce generic flexible array frame member wifi: mac80211: add documentation for amsdu_mesh_control wifi: cfg80211: remove gfp parameter from cfg80211_obss_color_collision_notify description wifi: mac80211: always initialize link_sta with sta wifi: mac80211: pass 'sta' to ieee80211_rx_data_set_sta() wifi: cfg80211: Set SSID if it is not already set wifi: rtw89: move H2C of del_pkt_offload before polling FW status ready wifi: rtw89: use readable return 0 in rtw89_mac_cfg_ppdu_status() wifi: rtw88: usb: drop now unnecessary URB size check wifi: rtw88: usb: send Zero length packets if necessary wifi: rtw88: usb: Set qsel correctly wifi: mac80211: fix off-by-one link setting wifi: mac80211: Fix for Rx fragmented action frames wifi: mac80211: avoid u32_encode_bits() warning wifi: mac80211: Don't translate MLD addresses for multicast wifi: cfg80211: call reg_notifier for self managed wiphy from driver hint wifi: cfg80211: get rid of gfp in cfg80211_bss_color_notify wifi: nl80211: Allow authentication frames and set keys on NAN interface wifi: mac80211: fix non-MLO station association wifi: mac80211: Allow NSS change only up to capability ... ==================== Link: https://lore.kernel.org/r/20230216105406.208416-1-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-16seg6: add PSP flavor support for SRv6 End behaviorAndrea Mayer1-3/+333
The "flavors" framework defined in RFC8986 [1] represents additional operations that can modify or extend a subset of existing behaviors such as SRv6 End, End.X and End.T. We report these flavors hereafter: - Penultimate Segment Pop (PSP); - Ultimate Segment Pop (USP); - Ultimate Segment Decapsulation (USD). Depending on how the Segment Routing Header (SRH) has to be handled, an SRv6 End* behavior can support these flavors either individually or in combinations. In this patch, we only consider the PSP flavor for the SRv6 End behavior. A PSP enabled SRv6 End behavior is used by the Source/Ingress SR node (i.e., the one applying the SRv6 Policy) when it needs to instruct the penultimate SR Endpoint node listed in the SID List (carried by the SRH) to remove the SRH from the IPv6 header. Specifically, a PSP enabled SRv6 End behavior processes the SRH by: i) decreasing the Segment Left (SL) from 1 to 0; ii) copying the Last Segment IDentifier (SID) into the IPv6 Destination Address (DA); iii) removing (i.e., popping) the outer SRH from the extension headers following the IPv6 header. It is important to note that PSP operation (steps i, ii, iii) takes place only at a penultimate SR Segment Endpoint node (i.e., when the SL=1) and does not happen at non-penultimate Endpoint nodes. Indeed, when a SID of PSP flavor is processed at a non-penultimate SR Segment Endpoint node, the PSP operation is not performed because it would not be possible to decrease the SL from 1 to 0. SL=2 SL=1 SL=0 | | | For example, given the SRv6 policy (SID List := < X, Y, Z >): - a PSP enabled SRv6 End behavior bound to SID "Y" will apply the PSP operation as Segment Left (SL) is 1, corresponding to the Penultimate Segment of the SID List; - a PSP enabled SRv6 End behavior bound to SID "X" will *NOT* apply the PSP operation as the Segment Left is 2. This behavior instance will apply the "standard" End packet processing, ignoring the configured PSP flavor at all. [1] - RFC8986: https://datatracker.ietf.org/doc/html/rfc8986 Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16seg6: factor out End lookup nexthop processing to a dedicated functionAndrea Mayer1-6/+10
The End nexthop lookup/input operations are moved into a new helper function named input_action_end_finish(). This avoids duplicating the code needed to compute the nexthop in the different flavors of the End behavior. Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16devlink: Fix netdev notifier chain corruptionIdo Schimmel2-12/+1
Cited commit changed devlink to register its netdev notifier block on the global netdev notifier chain instead of on the per network namespace one. However, when changing the network namespace of the devlink instance, devlink still tries to unregister its notifier block from the chain of the old namespace and register it on the chain of the new namespace. This results in corruption of the notifier chains, as the same notifier block is registered on two different chains: The global one and the per network namespace one. In turn, this causes other problems such as the inability to dismantle namespaces due to netdev reference count issues. Fix by preventing devlink from moving its notifier block between namespaces. Reproducer: # echo "10 1" > /sys/bus/netdevsim/new_device # ip netns add test123 # devlink dev reload netdevsim/netdevsim10 netns test123 # ip netns del test123 [ 71.935619] unregister_netdevice: waiting for lo to become free. Usage count = 2 [ 71.938348] leaked reference. Fixes: 565b4824c39f ("devlink: change port event netdev notifier from per-net to global") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20230215073139.1360108-1-idosch@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16net/sched: act_pedit: use percpu overlimit counter when availablePedro Tammela1-3/+1
Since act_pedit now has access to percpu counters, use the tcf_action_inc_overlimit_qstats wrapper that will use the percpu counter whenever they are available. Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16net/sched: act_gate: use percpu statsPedro Tammela1-14/+16
The tc action act_gate was using shared stats, move it to percpu stats. tdc results: 1..12 ok 1 5153 - Add gate action with priority and sched-entry ok 2 7189 - Add gate action with base-time ok 3 a721 - Add gate action with cycle-time ok 4 c029 - Add gate action with cycle-time-ext ok 5 3719 - Replace gate base-time action ok 6 d821 - Delete gate action with valid index ok 7 3128 - Delete gate action with invalid index ok 8 7837 - List gate actions ok 9 9273 - Flush gate actions ok 10 c829 - Add gate action with duplicate index ok 11 3043 - Add gate action with invalid index ok 12 2930 - Add gate action with cookie Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16net/sched: act_connmark: transition to percpu stats and rcuPedro Tammela1-39/+68
The tc action act_connmark was using shared stats and taking the per action lock in the datapath. Improve it by using percpu stats and rcu. perf before: - 13.55% tcf_connmark_act - 81.18% _raw_spin_lock 80.46% native_queued_spin_lock_slowpath perf after: - 2.85% tcf_connmark_act tdc results: 1..15 ok 1 2002 - Add valid connmark action with defaults ok 2 56a5 - Add valid connmark action with control pass ok 3 7c66 - Add valid connmark action with control drop ok 4 a913 - Add valid connmark action with control pipe ok 5 bdd8 - Add valid connmark action with control reclassify ok 6 b8be - Add valid connmark action with control continue ok 7 d8a6 - Add valid connmark action with control jump ok 8 aae8 - Add valid connmark action with zone argument ok 9 2f0b - Add valid connmark action with invalid zone argument ok 10 9305 - Add connmark action with unsupported argument ok 11 71ca - Add valid connmark action and replace it ok 12 5f8f - Add valid connmark action with cookie ok 13 c506 - Replace connmark with invalid goto chain control ok 14 6571 - Delete connmark action with valid index ok 15 3426 - Delete connmark action with invalid index Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16net/sched: act_nat: transition to percpu stats and rcuPedro Tammela1-23/+49
The tc action act_nat was using shared stats and taking the per action lock in the datapath. Improve it by using percpu stats and rcu. perf before: - 10.48% tcf_nat_act - 81.83% _raw_spin_lock 81.08% native_queued_spin_lock_slowpath perf after: - 0.48% tcf_nat_act tdc results: 1..27 ok 1 7565 - Add nat action on ingress with default control action ok 2 fd79 - Add nat action on ingress with pipe control action ok 3 eab9 - Add nat action on ingress with continue control action ok 4 c53a - Add nat action on ingress with reclassify control action ok 5 76c9 - Add nat action on ingress with jump control action ok 6 24c6 - Add nat action on ingress with drop control action ok 7 2120 - Add nat action on ingress with maximum index value ok 8 3e9d - Add nat action on ingress with invalid index value ok 9 f6c9 - Add nat action on ingress with invalid IP address ok 10 be25 - Add nat action on ingress with invalid argument ok 11 a7bd - Add nat action on ingress with DEFAULT IP address ok 12 ee1e - Add nat action on ingress with ANY IP address ok 13 1de8 - Add nat action on ingress with ALL IP address ok 14 8dba - Add nat action on egress with default control action ok 15 19a7 - Add nat action on egress with pipe control action ok 16 f1d9 - Add nat action on egress with continue control action ok 17 6d4a - Add nat action on egress with reclassify control action ok 18 b313 - Add nat action on egress with jump control action ok 19 d9fc - Add nat action on egress with drop control action ok 20 a895 - Add nat action on egress with DEFAULT IP address ok 21 2572 - Add nat action on egress with ANY IP address ok 22 37f3 - Add nat action on egress with ALL IP address ok 23 6054 - Add nat action on egress with cookie ok 24 79d6 - Add nat action on ingress with cookie ok 25 4b12 - Replace nat action with invalid goto chain control ok 26 b811 - Delete nat action with valid index ok 27 a521 - Delete nat action with invalid index Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16net/core: refactor promiscuous mode messageJesse Brandeburg1-3/+2
The kernel stack can be more consistent by printing the IFF_PROMISC aka promiscuous enable/disable messages with the standard netdev_info message which can include bus and driver info as well as the device. typical command usage from user space looks like: ip link set eth0 promisc <on|off> But lots of utilities such as bridge, tcpdump, etc put the interface into promiscuous mode. old message: [ 406.034418] device eth0 entered promiscuous mode [ 408.424703] device eth0 left promiscuous mode new message: [ 406.034431] ice 0000:17:00.0 eth0: entered promiscuous mode [ 408.424715] ice 0000:17:00.0 eth0: left promiscuous mode Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16net/core: print message for allmulticastJesse Brandeburg1-0/+2
When the user sets or clears the IFF_ALLMULTI flag in the netdev, there are no log messages printed to the kernel log to indicate anything happened. This is inexplicably different from most other dev->flags changes, and could suprise the user. Typically this occurs from user-space when a user: ip link set eth0 allmulticast <on|off> However, other devices like bridge set allmulticast as well, and many other flows might trigger entry into allmulticast as well. The new message uses the standard netdev_info print and looks like: [ 413.246110] ixgbe 0000:17:00.0 eth0: entered allmulticast mode [ 415.977184] ixgbe 0000:17:00.0 eth0: left allmulticast mode Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16net/sched: Retire rsvp classifierJamal Hadi Salim5-846/+0
The rsvp classifier has served us well for about a quarter of a century but has has not been getting much maintenance attention due to lack of known users. Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16net/sched: Retire tcindex classifierJamal Hadi Salim3-728/+0
The tcindex classifier has served us well for about a quarter of a century but has not been getting much TLC due to lack of known users. Most recently it has become easy prey to syzkaller. For this reason, we are retiring it. Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16net/sched: Retire dsmark qdiscJamal Hadi Salim3-530/+0
The dsmark qdisc has served us well over the years for diffserv but has not been getting much attention due to other more popular approaches to do diffserv services. Most recently it has become a shooting target for syzkaller. For this reason, we are retiring it. Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16net/sched: Retire ATM qdiscJamal Hadi Salim3-721/+0
The ATM qdisc has served us well over the years but has not been getting much TLC due to lack of known users. Most recently it has become a shooting target for syzkaller. For this reason, we are retiring it. Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16net/sched: Retire CBQ qdiscJamal Hadi Salim3-1745/+0
While this amazing qdisc has served us well over the years it has not been getting any tender love and care and has bitrotted over time. It has become mostly a shooting target for syzkaller lately. For this reason, we are retiring it. Goodbye CBQ - we loved you. Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16net: msg_zerocopy: elide page accounting if RLIM_INFINITYWillem de Bruijn1-2/+6
MSG_ZEROCOPY ensures that pinned user pages do not exceed the limit. If no limit is set, skip this accounting as otherwise expensive atomic_long operations are called for no reason. This accounting is already skipped for privileged (CAP_IPC_LOCK) users. Rely on the same mechanism: if no mmp->user is set, mm_unaccount_pinned_pages does not decrement either. Tested by running tools/testing/selftests/net/msg_zerocopy.sh with an unprivileged user for the TXMODE binary: ip netns exec "${NS1}" sudo -u "{$USER}" "${BIN}" "-${IP}" ... Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20230214155740.3448763-1-willemdebruijn.kernel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-16devlink: Move health common function to health fileMoshe Shemesh2-60/+32
Now that all devlink health callbacks and related code are in file health.c move common health functions and devlink_health_reporter struct to be local in health.c file. Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-16devlink: Move devlink health test to health fileMoshe Shemesh3-16/+18
Move devlink health report test callback from leftover.c to health.c. No functional change in this patch. Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-16devlink: Move devlink health dump to health fileMoshe Shemesh3-123/+126
Move devlink health report dump callbacks and related code from leftover.c to health.c. No functional change in this patch. Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-16devlink: Move devlink fmsg and health diagnose to health fileMoshe Shemesh3-630/+636
Devlink fmsg (formatted message) is used by devlink health diagnose, dump and drivers which support these devlink health callbacks. Therefore, move devlink fmsg helpers and related code to file health.c. Move devlink health diagnose to file health.c. No functional change in this patch. Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-16devlink: Move devlink health report and recover to health fileMoshe Shemesh3-138/+144
Move devlink health report helper and recover callback and related code from leftover.c to health.c. No functional change in this patch. Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-16devlink: Move devlink health get and set code to health fileMoshe Shemesh3-217/+234
Move devlink health get and set callbacks and related code from leftover.c to health.c. No functional change in this patch. Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-16devlink: health: Fix nla_nest_end in error flowMoshe Shemesh1-1/+1
devlink_nl_health_reporter_fill() error flow calls nla_nest_end(). Fix it to call nla_nest_cancel() instead. Note the bug is harmless as genlmsg_cancel() cancel the entire message, so no fixes tag added. Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-16devlink: Split out health reporter create codeMoshe Shemesh4-209/+226
Move devlink health reporter create/destroy and related dev code to new file health.c. This file shall include all callbacks and functionality that are related to devlink health. In addition, fix kdoc indentation and make reporter create/destroy kdoc more clear. No functional change in this patch. Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-16bpf, test_run: fix &xdp_frame misplacement for LIVE_FRAMESAlexander Lobakin1-6/+23
&xdp_buff and &xdp_frame are bound in a way that xdp_buff->data_hard_start == xdp_frame It's always the case and e.g. xdp_convert_buff_to_frame() relies on this. IOW, the following: for (u32 i = 0; i < 0xdead; i++) { xdpf = xdp_convert_buff_to_frame(&xdp); xdp_convert_frame_to_buff(xdpf, &xdp); } shouldn't ever modify @xdpf's contents or the pointer itself. However, "live packet" code wrongly treats &xdp_frame as part of its context placed *before* the data_hard_start. With such flow, data_hard_start is sizeof(*xdpf) off to the right and no longer points to the XDP frame. Instead of replacing `sizeof(ctx)` with `offsetof(ctx, xdpf)` in several places and praying that there are no more miscalcs left somewhere in the code, unionize ::frm with ::data in a flex array, so that both starts pointing to the actual data_hard_start and the XDP frame actually starts being a part of it, i.e. a part of the headroom, not the context. A nice side effect is that the maximum frame size for this mode gets increased by 40 bytes, as xdp_buff::frame_sz includes everything from data_hard_start (-> includes xdpf already) to the end of XDP/skb shared info. Also update %MAX_PKT_SIZE accordingly in the selftests code. Leave it hardcoded for 64 bit && 4k pages, it can be made more flexible later on. Minor: align `&head->data` with how `head->frm` is assigned for consistency. Minor #2: rename 'frm' to 'frame' in &xdp_page_head while at it for clarity. (was found while testing XDP traffic generator on ice, which calls xdp_convert_frame_to_buff() for each XDP frame) Fixes: b530e9e1063e ("bpf: Add "live packet" mode for XDP in BPF_PROG_RUN") Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Link: https://lore.kernel.org/r/20230215185440.4126672-1-aleksander.lobakin@intel.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2023-02-15wifi: mac80211: add documentation for amsdu_mesh_controlJohannes Berg1-0/+2
This documentation wasn't added in the original patch, add it now. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: 6e4c0d0460bd ("wifi: mac80211: add a workaround for receiving non-standard mesh A-MSDU") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-15wifi: mac80211: always initialize link_sta with staJohannes Berg1-0/+2
When we have multiple interfaces receiving the same frame, such as a multicast frame, one interface might have a sta and the other not. In this case, link_sta would be set but not cleared again. Always set link_sta, so we keep an invariant that link_sta and sta are either both set or both not set. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-15wifi: mac80211: pass 'sta' to ieee80211_rx_data_set_sta()Johannes Berg1-15/+11
There's at least one case in ieee80211_rx_for_interface() where we might pass &((struct sta_info *)NULL)->sta to it only to then do container_of(), and then checking the result for NULL, but checking the result of container_of() for NULL looks really odd. Fix this by just passing the struct sta_info * instead. Fixes: e66b7920aa5a ("wifi: mac80211: fix initialization of rx->link and rx->link_sta") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-15wifi: cfg80211: Set SSID if it is not already setMarc Bornand1-0/+17
When a connection was established without going through NL80211_CMD_CONNECT, the ssid was never set in the wireless_dev struct. Now we set it in __cfg80211_connect_result() when it is not already set. When using a userspace configuration that does not call cfg80211_connect() (can be checked with breakpoints in the kernel), this patch should allow `networkctl status device_name` to output the SSID instead of null. Cc: stable@vger.kernel.org Reported-by: Yohan Prod'homme <kernel@zoddo.fr> Fixes: 7b0a0e3c3a88 (wifi: cfg80211: do some rework towards MLO link APIs) Link: https://bugzilla.kernel.org/show_bug.cgi?id=216711 Signed-off-by: Marc Bornand <dev.mbornand@systemb.ch> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-15net: mpls: fix stale pointer if allocation fails during device renameJakub Kicinski1-0/+4
lianhui reports that when MPLS fails to register the sysctl table under new location (during device rename) the old pointers won't get overwritten and may be freed again (double free). Handle this gracefully. The best option would be unregistering the MPLS from the device completely on failure, but unfortunately mpls_ifdown() can fail. So failing fully is also unreliable. Another option is to register the new table first then only remove old one if the new one succeeds. That requires more code, changes order of notifications and two tables may be visible at the same time. sysctl point is not used in the rest of the code - set to NULL on failures and skip unregister if already NULL. Reported-by: lianhui tang <bluetlh@gmail.com> Fixes: 0fae3bf018d9 ("mpls: handle device renames for per-device sysctls") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-15net: no longer support SOCK_REFCNT_DEBUG featureJason Xing12-59/+0
Commit e48c414ee61f ("[INET]: Generalise the TCP sock ID lookup routines") commented out the definition of SOCK_REFCNT_DEBUG in 2005 and later another commit 463c84b97f24 ("[NET]: Introduce inet_connection_sock") removed it. Since we could track all of them through bpf and kprobe related tools and the feature could print loads of information which might not be that helpful even under a little bit pressure, the whole feature which has been inactive for many years is no longer supported. Link: https://lore.kernel.org/lkml/20230211065153.54116-1-kerneljasonxing@gmail.com/ Suggested-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Jason Xing <kernelxing@tencent.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Acked-by: Wenjia Zhang <wenjia@linux.ibm.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-15net/sched: tcindex: search key must be 16 bitsPedro Tammela1-1/+1
Syzkaller found an issue where a handle greater than 16 bits would trigger a null-ptr-deref in the imperfect hash area update. general protection fault, probably for non-canonical address 0xdffffc0000000015: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x00000000000000a8-0x00000000000000af] CPU: 0 PID: 5070 Comm: syz-executor456 Not tainted 6.2.0-rc7-syzkaller-00112-gc68f345b7c42 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/21/2023 RIP: 0010:tcindex_set_parms+0x1a6a/0x2990 net/sched/cls_tcindex.c:509 Code: 01 e9 e9 fe ff ff 4c 8b bd 28 fe ff ff e8 0e 57 7d f9 48 8d bb a8 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 94 0c 00 00 48 8b 85 f8 fd ff ff 48 8b 9b a8 00 RSP: 0018:ffffc90003d3ef88 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000015 RSI: ffffffff8803a102 RDI: 00000000000000a8 RBP: ffffc90003d3f1d8 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: ffff88801e2b10a8 R13: dffffc0000000000 R14: 0000000000030000 R15: ffff888017b3be00 FS: 00005555569af300(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000056041c6d2000 CR3: 000000002bfca000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> tcindex_change+0x1ea/0x320 net/sched/cls_tcindex.c:572 tc_new_tfilter+0x96e/0x2220 net/sched/cls_api.c:2155 rtnetlink_rcv_msg+0x959/0xca0 net/core/rtnetlink.c:6132 netlink_rcv_skb+0x165/0x440 net/netlink/af_netlink.c:2574 netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline] netlink_unicast+0x547/0x7f0 net/netlink/af_netlink.c:1365 netlink_sendmsg+0x91b/0xe10 net/netlink/af_netlink.c:1942 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xd3/0x120 net/socket.c:734 ____sys_sendmsg+0x334/0x8c0 net/socket.c:2476 ___sys_sendmsg+0x110/0x1b0 net/socket.c:2530 __sys_sendmmsg+0x18f/0x460 net/socket.c:2616 __do_sys_sendmmsg net/socket.c:2645 [inline] __se_sys_sendmmsg net/socket.c:2642 [inline] __x64_sys_sendmmsg+0x9d/0x100 net/socket.c:2642 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 Fixes: ee059170b1f7 ("net/sched: tcindex: update imperfect hash filters respecting rcu") Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Reported-by: syzbot <syzkaller@googlegroups.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-15net-sysfs: make kobj_type structures constantThomas Weißschuh1-2/+2
Since commit ee6d3dd4ed48 ("driver core: make kobj_type constant.") the driver core allows the usage of const struct kobj_type. Take advantage of this to constify the structure definitions to prevent modification at runtime. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-15net: bridge: make kobj_type structure constantThomas Weißschuh1-1/+1
Since commit ee6d3dd4ed48 ("driver core: make kobj_type constant.") the driver core allows the usage of const struct kobj_type. Take advantage of this to constify the structure definition to prevent modification at runtime. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-15tipc: fix kernel warning when sending SYN messageTung Nguyen1-0/+2
When sending a SYN message, this kernel stack trace is observed: ... [ 13.396352] RIP: 0010:_copy_from_iter+0xb4/0x550 ... [ 13.398494] Call Trace: [ 13.398630] <TASK> [ 13.398630] ? __alloc_skb+0xed/0x1a0 [ 13.398630] tipc_msg_build+0x12c/0x670 [tipc] [ 13.398630] ? shmem_add_to_page_cache.isra.71+0x151/0x290 [ 13.398630] __tipc_sendmsg+0x2d1/0x710 [tipc] [ 13.398630] ? tipc_connect+0x1d9/0x230 [tipc] [ 13.398630] ? __local_bh_enable_ip+0x37/0x80 [ 13.398630] tipc_connect+0x1d9/0x230 [tipc] [ 13.398630] ? __sys_connect+0x9f/0xd0 [ 13.398630] __sys_connect+0x9f/0xd0 [ 13.398630] ? preempt_count_add+0x4d/0xa0 [ 13.398630] ? fpregs_assert_state_consistent+0x22/0x50 [ 13.398630] __x64_sys_connect+0x16/0x20 [ 13.398630] do_syscall_64+0x42/0x90 [ 13.398630] entry_SYSCALL_64_after_hwframe+0x63/0xcd It is because commit a41dad905e5a ("iov_iter: saner checks for attempt to copy to/from iterator") has introduced sanity check for copying from/to iov iterator. Lacking of copy direction from the iterator viewpoint would lead to kernel stack trace like above. This commit fixes this issue by initializing the iov iterator with the correct copy direction when sending SYN or ACK without data. Fixes: f25dcc7687d4 ("tipc: tipc ->sendmsg() conversion") Reported-by: syzbot+d43608d061e8847ec9f3@syzkaller.appspotmail.com Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au> Link: https://lore.kernel.org/r/20230214012606.5804-1-tung.q.nguyen@dektech.com.au Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-15net: use a bounce buffer for copying skb->markEric Dumazet1-3/+6
syzbot found arm64 builds would crash in sock_recv_mark() when CONFIG_HARDENED_USERCOPY=y x86 and powerpc are not detecting the issue because they define user_access_begin. This will be handled in a different patch, because a check_object_size() is missing. Only data from skb->cb[] can be copied directly to/from user space, as explained in commit 79a8a642bf05 ("net: Whitelist the skbuff_head_cache "cb" field") syzbot report was: usercopy: Kernel memory exposure attempt detected from SLUB object 'skbuff_head_cache' (offset 168, size 4)! ------------[ cut here ]------------ kernel BUG at mm/usercopy.c:102 ! Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 4410 Comm: syz-executor533 Not tainted 6.2.0-rc7-syzkaller-17907-g2d3827b3f393 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/21/2023 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : usercopy_abort+0x90/0x94 mm/usercopy.c:90 lr : usercopy_abort+0x90/0x94 mm/usercopy.c:90 sp : ffff80000fb9b9a0 x29: ffff80000fb9b9b0 x28: ffff0000c6073400 x27: 0000000020001a00 x26: 0000000000000014 x25: ffff80000cf52000 x24: fffffc0000000000 x23: 05ffc00000000200 x22: fffffc000324bf80 x21: ffff0000c92fe1a8 x20: 0000000000000001 x19: 0000000000000004 x18: 0000000000000000 x17: 656a626f2042554c x16: ffff0000c6073dd0 x15: ffff80000dbd2118 x14: ffff0000c6073400 x13: 00000000ffffffff x12: ffff0000c6073400 x11: ff808000081bbb4c x10: 0000000000000000 x9 : 7b0572d7cc0ccf00 x8 : 7b0572d7cc0ccf00 x7 : ffff80000bf650d4 x6 : 0000000000000000 x5 : 0000000000000001 x4 : 0000000000000001 x3 : 0000000000000000 x2 : ffff0001fefbff08 x1 : 0000000100000000 x0 : 000000000000006c Call trace: usercopy_abort+0x90/0x94 mm/usercopy.c:90 __check_heap_object+0xa8/0x100 mm/slub.c:4761 check_heap_object mm/usercopy.c:196 [inline] __check_object_size+0x208/0x6b8 mm/usercopy.c:251 check_object_size include/linux/thread_info.h:199 [inline] __copy_to_user include/linux/uaccess.h:115 [inline] put_cmsg+0x408/0x464 net/core/scm.c:238 sock_recv_mark net/socket.c:975 [inline] __sock_recv_cmsgs+0x1fc/0x248 net/socket.c:984 sock_recv_cmsgs include/net/sock.h:2728 [inline] packet_recvmsg+0x2d8/0x678 net/packet/af_packet.c:3482 ____sys_recvmsg+0x110/0x3a0 ___sys_recvmsg net/socket.c:2737 [inline] __sys_recvmsg+0x194/0x210 net/socket.c:2767 __do_sys_recvmsg net/socket.c:2777 [inline] __se_sys_recvmsg net/socket.c:2774 [inline] __arm64_sys_recvmsg+0x2c/0x3c net/socket.c:2774 __invoke_syscall arch/arm64/kernel/syscall.c:38 [inline] invoke_syscall+0x64/0x178 arch/arm64/kernel/syscall.c:52 el0_svc_common+0xbc/0x180 arch/arm64/kernel/syscall.c:142 do_el0_svc+0x48/0x110 arch/arm64/kernel/syscall.c:193 el0_svc+0x58/0x14c arch/arm64/kernel/entry-common.c:637 el0t_64_sync_handler+0x84/0xf0 arch/arm64/kernel/entry-common.c:655 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591 Code: 91388800 aa0903e1 f90003e8 94e6d752 (d4210000) Fixes: 6fd1d51cfa25 ("net: SO_RCVMARK socket option for SO_MARK with recvmsg()") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Erin MacNeil <lnx.erin@gmail.com> Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com> Link: https://lore.kernel.org/r/20230213160059.3829741-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-06 18:07:59 +0300