summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2017-10-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds23-137/+160
Pull networking fixes from David Miller: 1) Check iwlwifi 9000 reorder buffer out-of-space condition properly, from Sara Sharon. 2) Fix RCU splat in qualcomm rmnet driver, from Subash Abhinov Kasiviswanathan. 3) Fix session and tunnel release races in l2tp, from Guillaume Nault and Sabrina Dubroca. 4) Fix endian bug in sctp_diag_dump(), from Dan Carpenter. 5) Several mlx5 driver fixes from the Mellanox folks (max flow counters cap check, invalid memory access in IPoIB support, etc.) 6) tun_get_user() should bail if skb->len is zero, from Alexander Potapenko. 7) Fix RCU lookups in inetpeer, from Eric Dumazet. 8) Fix locking in packet_do_bund(). 9) Handle cb->start() error properly in netlink dump code, from Jason A. Donenfeld. 10) Handle multicast properly in UDP socket early demux code. From Paolo Abeni. 11) Several erspan bug fixes in ip_gre, from Xin Long. 12) Fix use-after-free in socket filter code, in order to handle the fact that listener lock is no longer taken during the three-way TCP handshake. From Eric Dumazet. 13) Fix infoleak in RTM_GETSTATS, from Nikolay Aleksandrov. 14) Fix tail call generation in x86-64 BPF JIT, from Alexei Starovoitov. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (77 commits) net: 8021q: skip packets if the vlan is down bpf: fix bpf_tail_call() x64 JIT net: stmmac: dwmac-rk: Add RK3128 GMAC support rndis_host: support Novatel Verizon USB730L net: rtnetlink: fix info leak in RTM_GETSTATS call socket, bpf: fix possible use after free mlxsw: spectrum_router: Track RIF of IPIP next hops mlxsw: spectrum_router: Move VRF refcounting net: hns3: Fix an error handling path in 'hclge_rss_init_hw()' net: mvpp2: Fix clock resource by adding an optional bus clock r8152: add Linksys USB3GIGV1 id l2tp: fix l2tp_eth module loading ip_gre: erspan device should keep dst ip_gre: set tunnel hlen properly in erspan_tunnel_init ip_gre: check packet length and mtu correctly in erspan_xmit ip_gre: get key from session_id correctly in erspan_rcv tipc: use only positive error codes in messages ppp: fix __percpu annotation udp: perform source validation for mcast early demux IPv4: early demux can return an error code ...
2017-10-05net: 8021q: skip packets if the vlan is downVishakha Narvekar1-0/+6
If the vlan is down, free the packet instead of proceeding with other processing, or counting it as received. If vlan interfaces are used as slaves for bonding, with arp monitoring for connectivity, if the rx counter is seen to be incrementing, then the bond device will not observe that the interface is down. CC: David S. Miller <davem@davemloft.net> Signed-off-by: Vishakha Narvekar <Vishakha.Narvekar@dell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03net: rtnetlink: fix info leak in RTM_GETSTATS callNikolay Aleksandrov1-0/+3
When RTM_GETSTATS was added the fields of its header struct were not all initialized when returning the result thus leaking 4 bytes of information to user-space per rtnl_fill_statsinfo call, so initialize them now. Thanks to Alexander Potapenko for the detailed report and bisection. Reported-by: Alexander Potapenko <glider@google.com> Fixes: 10c9ead9f3c6 ("rtnetlink: add new RTM_GETSTATS message to dump link stats") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03socket, bpf: fix possible use after freeEric Dumazet2-5/+12
Starting from linux-4.4, 3WHS no longer takes the listener lock. Since this time, we might hit a use-after-free in sk_filter_charge(), if the filter we got in the memcpy() of the listener content just happened to be replaced by a thread changing listener BPF filter. To fix this, we need to make sure the filter refcount is not already zero before incrementing it again. Fixes: e994b2f0fb92 ("tcp: do not lock listener to process SYN packets") Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02l2tp: fix l2tp_eth module loadingGuillaume Nault1-49/+2
The l2tp_eth module crashes if its netlink callbacks are run when the pernet data aren't initialised. We should normally register_pernet_device() before the genl callbacks. However, the pernet data only maintain a list of l2tpeth interfaces, and this list is never used. So let's just drop pernet handling instead. Fixes: d9e31d17ceba ("l2tp: Add L2TP ethernet pseudowire support") Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02ip_gre: erspan device should keep dstXin Long1-0/+1
The patch 'ip_gre: ipgre_tap device should keep dst' fixed the issue ipgre_tap dev mtu couldn't be updated in tx path. The same fix is needed for erspan as well. Fixes: 84e54fe0a5ea ("gre: introduce native tunnel support for ERSPAN") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02ip_gre: set tunnel hlen properly in erspan_tunnel_initXin Long1-1/+3
According to __gre_tunnel_init, tunnel->hlen should be set as the headers' length between inner packet and outer iphdr. It would be used especially to calculate a proper mtu when updating mtu in tnl_update_pmtu. Now without setting it, a bigger mtu value than expected would be updated, which hurts performance a lot. This patch is to fix it by setting tunnel->hlen with: tunnel->tun_hlen + tunnel->encap_hlen + sizeof(struct erspanhdr) Fixes: 84e54fe0a5ea ("gre: introduce native tunnel support for ERSPAN") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02ip_gre: check packet length and mtu correctly in erspan_xmitXin Long1-1/+1
As a ARPHRD_ETHER device, skb->len in erspan_xmit is the length of the whole ether packet. So before checking if a packet size exceeds the mtu, skb->len should subtract dev->hard_header_len. Otherwise, all packets with max size according to mtu would be trimmed to be truncated packet. Fixes: 84e54fe0a5ea ("gre: introduce native tunnel support for ERSPAN") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02ip_gre: get key from session_id correctly in erspan_rcvXin Long1-3/+1
erspan only uses the first 10 bits of session_id as the key to look up the tunnel. But in erspan_rcv, it missed 'session_id & ID_MASK' when getting the key from session_id. If any other flag is also set in session_id in a packet, it would fail to find the tunnel due to incorrect key in erspan_rcv. This patch is to add 'session_id & ID_MASK' there and also remove the unnecessary variable session_id. Fixes: 84e54fe0a5ea ("gre: introduce native tunnel support for ERSPAN") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01tipc: use only positive error codes in messagesParthasarathy Bhuvaragan1-1/+1
In commit e3a77561e7d32 ("tipc: split up function tipc_msg_eval()"), we have updated the function tipc_msg_lookup_dest() to set the error codes to negative values at destination lookup failures. Thus when the function sets the error code to -TIPC_ERR_NO_NAME, its inserted into the 4 bit error field of the message header as 0xf instead of TIPC_ERR_NO_NAME (1). The value 0xf is an unknown error code. In this commit, we set only positive error code. Fixes: e3a77561e7d32 ("tipc: split up function tipc_msg_eval()") Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01udp: perform source validation for mcast early demuxPaolo Abeni2-21/+38
The UDP early demux can leverate the rx dst cache even for multicast unconnected sockets. In such scenario the ipv4 source address is validated only on the first packet in the given flow. After that, when we fetch the dst entry from the socket rx cache, we stop enforcing the rp_filter and we even start accepting any kind of martian addresses. Disabling the dst cache for unconnected multicast socket will cause large performace regression, nearly reducing by half the max ingress tput. Instead we factor out a route helper to completely validate an skb source address for multicast packets and we call it from the UDP early demux for mcast packets landing on unconnected sockets, after successful fetching the related cached dst entry. This still gives a measurable, but limited performance regression: rp_filter = 0 rp_filter = 1 edmux disabled: 1182 Kpps 1127 Kpps edmux before: 2238 Kpps 2238 Kpps edmux after: 2037 Kpps 2019 Kpps The above figures are on top of current net tree. Applying the net-next commit 6e617de84e87 ("net: avoid a full fib lookup when rp_filter is disabled.") the delta with rp_filter == 0 will decrease even more. Fixes: 421b3885bf6d ("udp: ipv4: Add udp early demux") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01IPv4: early demux can return an error codePaolo Abeni3-19/+26
Currently no error is emitted, but this infrastructure will used by the next patch to allow source address validation for mcast sockets. Since early demux can do a route lookup and an ipv4 route lookup can return an error code this is consistent with the current ipv4 route infrastructure. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01ip6_tunnel: update mtu properly for ARPHRD_ETHER tunnel device in tx pathXin Long1-2/+3
Now when updating mtu in tx path, it doesn't consider ARPHRD_ETHER tunnel device, like ip6gre_tap tunnel, for which it should also subtract ether header to get the correct mtu. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01ip6_gre: ip6gre_tap device should keep dstXin Long1-0/+1
The patch 'ip_gre: ipgre_tap device should keep dst' fixed a issue that ipgre_tap mtu couldn't be updated in tx path. The same fix is needed for ip6gre_tap as well. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01ip_gre: ipgre_tap device should keep dstXin Long1-0/+1
Without keeping dst, the tunnel will not update any mtu/pmtu info, since it does not have a dst on the skb. Reproducer: client(ipgre_tap1 - eth1) <-----> (eth1 - ipgre_tap1)server After reducing eth1's mtu on client, then perforamnce became 0. This patch is to netif_keep_dst in gre_tap_init, as ipgre does. Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-30netlink: do not proceed if dump's start() errsJason A. Donenfeld1-2/+5
Drivers that use the start method for netlink dumping rely on dumpit not being called if start fails. For example, ila_xlat.c allocates memory and assigns it to cb->args[0] in its start() function. It might fail to do that and return -ENOMEM instead. However, even when returning an error, dumpit will be called, which, in the example above, quickly dereferences the memory in cb->args[0], which will OOPS the kernel. This is but one example of how this goes wrong. Since start() has always been a function with an int return type, it therefore makes sense to use it properly, rather than ignoring it. This patch thus returns early and does not call dumpit() when start() fails. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-28Revert "Bluetooth: Add option for disabling legacy ioctl interfaces"Linus Torvalds2-16/+0
This reverts commit dbbccdc4ced015cdd4051299bd87fbe0254ad351. It turns out that the "legacy" users aren't so legacy at all, and that turning off the legacy ioctl will break the current Qt bluetooth stack for bluetooth LE devices that were released just a couple of months ago. So it's simply not true that this was a legacy interface that hasn't been needed and is only limited to old legacy BT devices. Because I actually read Kconfig help messages, and actively try to turn off features that I don't need, I turned the option off. Then I spent _way_ too much time debugging BLE issues until I realized that it wasn't the Qt and subsurface development that had broken one of my dive computer BLE downloads, but simply my broken kernel config. Maybe in a decade it will be true that this is a legacy interface. And maybe with a better help-text and correct dependencies, this kind of legacy removal might be acceptable. But as things are right now both the commit message and the Kconfig help text were misleading, and the Kconfig option had the wrong dependenencies. There's no reason to keep that broken Kconfig option in the tree. Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-28net: Set sk_prot_creator when cloning sockets to the right protoChristoph Paasch1-0/+2
sk->sk_prot and sk->sk_prot_creator can differ when the app uses IPV6_ADDRFORM (transforming an IPv6-socket to an IPv4-one). Which is why sk_prot_creator is there to make sure that sk_prot_free() does the kmem_cache_free() on the right kmem_cache slab. Now, if such a socket gets transformed back to a listening socket (using connect() with AF_UNSPEC) we will allocate an IPv4 tcp_sock through sk_clone_lock() when a new connection comes in. But sk_prot_creator will still point to the IPv6 kmem_cache (as everything got copied in sk_clone_lock()). When freeing, we will thus put this memory back into the IPv6 kmem_cache although it was allocated in the IPv4 cache. I have seen memory corruption happening because of this. With slub-debugging and MEMCG_KMEM enabled this gives the warning "cache_from_obj: Wrong slab cache. TCPv6 but object is from TCP" A C-program to trigger this: void main(void) { int fd = socket(AF_INET6, SOCK_STREAM, IPPROTO_TCP); int new_fd, newest_fd, client_fd; struct sockaddr_in6 bind_addr; struct sockaddr_in bind_addr4, client_addr1, client_addr2; struct sockaddr unsp; int val; memset(&bind_addr, 0, sizeof(bind_addr)); bind_addr.sin6_family = AF_INET6; bind_addr.sin6_port = ntohs(42424); memset(&client_addr1, 0, sizeof(client_addr1)); client_addr1.sin_family = AF_INET; client_addr1.sin_port = ntohs(42424); client_addr1.sin_addr.s_addr = inet_addr("127.0.0.1"); memset(&client_addr2, 0, sizeof(client_addr2)); client_addr2.sin_family = AF_INET; client_addr2.sin_port = ntohs(42421); client_addr2.sin_addr.s_addr = inet_addr("127.0.0.1"); memset(&unsp, 0, sizeof(unsp)); unsp.sa_family = AF_UNSPEC; bind(fd, (struct sockaddr *)&bind_addr, sizeof(bind_addr)); listen(fd, 5); client_fd = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP); connect(client_fd, (struct sockaddr *)&client_addr1, sizeof(client_addr1)); new_fd = accept(fd, NULL, NULL); close(fd); val = AF_INET; setsockopt(new_fd, SOL_IPV6, IPV6_ADDRFORM, &val, sizeof(val)); connect(new_fd, &unsp, sizeof(unsp)); memset(&bind_addr4, 0, sizeof(bind_addr4)); bind_addr4.sin_family = AF_INET; bind_addr4.sin_port = ntohs(42421); bind(new_fd, (struct sockaddr *)&bind_addr4, sizeof(bind_addr4)); listen(new_fd, 5); client_fd = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP); connect(client_fd, (struct sockaddr *)&client_addr2, sizeof(client_addr2)); newest_fd = accept(new_fd, NULL, NULL); close(new_fd); close(client_fd); close(new_fd); } As far as I can see, this bug has been there since the beginning of the git-days. Signed-off-by: Christoph Paasch <cpaasch@apple.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-28packet: only test po->has_vnet_hdr once in packet_sndWillem de Bruijn1-1/+3
Packet socket option po->has_vnet_hdr can be updated concurrently with other operations if no ring is attached. Do not test the option twice in packet_snd, as the value may change in between calls. A race on setsockopt disable may cause a packet > mtu to be sent without having GSO options set. Fixes: bfd5f4a3d605 ("packet: Add GSO/csum offload support.") Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-28packet: in packet_do_bind, test fanout with bind_lock heldWillem de Bruijn1-3/+5
Once a socket has po->fanout set, it remains a member of the group until it is destroyed. The prot_hook must be constant and identical across sockets in the group. If fanout_add races with packet_do_bind between the test of po->fanout and taking the lock, the bind call may make type or dev inconsistent with that of the fanout group. Hold po->bind_lock when testing po->fanout to avoid this race. I had to introduce artificial delay (local_bh_enable) to actually observe the race. Fixes: dc99f600698d ("packet: Add fanout support.") Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-28net: dsa: Fix network device registration orderFlorian Fainelli1-13/+18
We cannot be registering the network device first, then setting its carrier off and finally connecting it to a PHY, doing that leaves a window during which the carrier is at best inconsistent, and at worse the device is not usable without a down/up sequence since the network device is visible to user space with possibly no PHY device attached. Re-order steps so that they make logical sense. This fixes some devices where the port was not usable after e.g: an unbind then bind of the driver. Fixes: 0071f56e46da ("dsa: Register netdev before phy") Fixes: 91da11f870f0 ("net: Distributed Switch Architecture protocol support") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-28inetpeer: fix RCU lookup() againEric Dumazet1-2/+2
My prior fix was not complete, as we were dereferencing a pointer three times per node, not twice as I initially thought. Fixes: 4cc5b44b29a9 ("inetpeer: fix RCU lookup()") Fixes: b145425f269a ("inetpeer: remove AVL implementation in favor of RB tree") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-27sctp: Fix a big endian bug in sctp_diag_dump()Dan Carpenter1-1/+3
The sctp_for_each_transport() function takes an pointer to int. The cb->args[] array holds longs so it's only using the high 32 bits. It works on little endian system but will break on big endian 64 bit machines. Fixes: d25adbeb0cdb ("sctp: fix an use-after-free issue in sctp_sock_dump") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Reviewed-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-26l2tp: fix race condition in l2tp_tunnel_deleteSabrina Dubroca2-7/+8
If we try to delete the same tunnel twice, the first delete operation does a lookup (l2tp_tunnel_get), finds the tunnel, calls l2tp_tunnel_delete, which queues it for deletion by l2tp_tunnel_del_work. The second delete operation also finds the tunnel and calls l2tp_tunnel_delete. If the workqueue has already fired and started running l2tp_tunnel_del_work, then l2tp_tunnel_delete will queue the same tunnel a second time, and try to free the socket again. Add a dead flag to prevent firing the workqueue twice. Then we can remove the check of queue_work's result that was meant to prevent that race but doesn't. Reproducer: ip l2tp add tunnel tunnel_id 3000 peer_tunnel_id 4000 local 192.168.0.2 remote 192.168.0.1 encap udp udp_sport 5000 udp_dport 6000 ip l2tp add session name l2tp1 tunnel_id 3000 session_id 1000 peer_session_id 2000 ip link set l2tp1 up ip l2tp del tunnel tunnel_id 3000 ip l2tp del tunnel tunnel_id 3000 Fixes: f8ccac0e4493 ("l2tp: put tunnel socket release on a workqueue") Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-26vti: fix use after free in vti_tunnel_xmit/vti6_tnl_xmitAlexey Kodanev2-2/+4
When running LTP IPsec tests, KASan might report: BUG: KASAN: use-after-free in vti_tunnel_xmit+0xeee/0xff0 [ip_vti] Read of size 4 at addr ffff880dc6ad1980 by task swapper/0/0 ... Call Trace: <IRQ> dump_stack+0x63/0x89 print_address_description+0x7c/0x290 kasan_report+0x28d/0x370 ? vti_tunnel_xmit+0xeee/0xff0 [ip_vti] __asan_report_load4_noabort+0x19/0x20 vti_tunnel_xmit+0xeee/0xff0 [ip_vti] ? vti_init_net+0x190/0x190 [ip_vti] ? save_stack_trace+0x1b/0x20 ? save_stack+0x46/0xd0 dev_hard_start_xmit+0x147/0x510 ? icmp_echo.part.24+0x1f0/0x210 __dev_queue_xmit+0x1394/0x1c60 ... Freed by task 0: save_stack_trace+0x1b/0x20 save_stack+0x46/0xd0 kasan_slab_free+0x70/0xc0 kmem_cache_free+0x81/0x1e0 kfree_skbmem+0xb1/0xe0 kfree_skb+0x75/0x170 kfree_skb_list+0x3e/0x60 __dev_queue_xmit+0x1298/0x1c60 dev_queue_xmit+0x10/0x20 neigh_resolve_output+0x3a8/0x740 ip_finish_output2+0x5c0/0xe70 ip_finish_output+0x4ba/0x680 ip_output+0x1c1/0x3a0 xfrm_output_resume+0xc65/0x13d0 xfrm_output+0x1e4/0x380 xfrm4_output_finish+0x5c/0x70 Can be fixed if we get skb->len before dst_output(). Fixes: b9959fd3b0fa ("vti: switch to new ip tunnel code") Fixes: 22e1b23dafa8 ("vti6: Support inter address family tunneling.") Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-26l2tp: fix race between l2tp_session_delete() and l2tp_tunnel_closeall()Guillaume Nault2-0/+7
There are several ways to remove L2TP sessions: * deleting a session explicitly using the netlink interface (with L2TP_CMD_SESSION_DELETE), * deleting the session's parent tunnel (either by closing the tunnel's file descriptor or using the netlink interface), * closing the PPPOL2TP file descriptor of a PPP pseudo-wire. In some cases, when these methods are used concurrently on the same session, the session can be removed twice, leading to use-after-free bugs. This patch adds a 'dead' flag, used by l2tp_session_delete() and l2tp_tunnel_closeall() to prevent them from stepping on each other's toes. The session deletion path used when closing a PPPOL2TP file descriptor doesn't need to be adapted. It already has to ensure that a session remains valid for the lifetime of its PPPOL2TP file descriptor. So it takes an extra reference on the session in the ->session_close() callback (pppol2tp_session_close()), which is eventually dropped in the ->sk_destruct() callback of the PPPOL2TP socket (pppol2tp_session_destruct()). Still, __l2tp_session_unhash() and l2tp_session_queue_purge() can be called twice and even concurrently for a given session, but thanks to proper locking and re-initialisation of list fields, this is not an issue. Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-26l2tp: ensure sessions are freed after their PPPOL2TP socketGuillaume Nault1-4/+4
If l2tp_tunnel_delete() or l2tp_tunnel_closeall() deletes a session right after pppol2tp_release() orphaned its socket, then the 'sock' variable of the pppol2tp_session_close() callback is NULL. Yet the session is still used by pppol2tp_release(). Therefore we need to take an extra reference in any case, to prevent l2tp_tunnel_delete() or l2tp_tunnel_closeall() from freeing the session. Since the pppol2tp_session_close() callback is only set if the session is associated to a PPPOL2TP socket and that both l2tp_tunnel_delete() and l2tp_tunnel_closeall() hold the PPPOL2TP socket before calling pppol2tp_session_close(), we're sure that pppol2tp_session_close() and pppol2tp_session_destruct() are paired and called in the right order. So the reference taken by the former will be released by the later. Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-25IB: Correct MR length field to be 64-bitParav Pandit1-1/+1
The ib_mr->length represents the length of the MR in bytes as per the IBTA spec 1.3 section 11.2.10.3 (REGISTER PHYSICAL MEMORY REGION). Currently ib_mr->length field is defined as only 32-bits field. This might result into truncation and failed WRs of consumers who registers more than 4GB bytes memory regions and whose WRs accessing such MRs. This patch makes the length 64-bit to avoid such truncation. Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Faisal Latif <faisal.latif@intel.com> Fixes: 4c67e2bfc8b7 ("IB/core: Introduce new fast registration API") Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds29-125/+206
Pull networking fixes from David Miller: 1) Fix NAPI poll list corruption in enic driver, from Christian Lamparter. 2) Fix route use after free, from Eric Dumazet. 3) Fix regression in reuseaddr handling, from Josef Bacik. 4) Assert the size of control messages in compat handling since we copy it in from userspace twice. From Meng Xu. 5) SMC layer bug fixes (missing RCU locking, bad refcounting, etc.) from Ursula Braun. 6) Fix races in AF_PACKET fanout handling, from Willem de Bruijn. 7) Don't use ARRAY_SIZE on spinlock array which might have zero entries, from Geert Uytterhoeven. 8) Fix miscomputation of checksum in ipv6 udp code, from Subash Abhinov Kasiviswanathan. 9) Push the ipv6 header properly in ipv6 GRE tunnel driver, from Xin Long. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (75 commits) inet: fix improper empty comparison net: use inet6_rcv_saddr to compare sockets net: set tb->fast_sk_family net: orphan frags on stand-alone ptype in dev_queue_xmit_nit MAINTAINERS: update git tree locations for ieee802154 subsystem net: prevent dst uses after free net: phy: Fix truncation of large IRQ numbers in phy_attached_print() net/smc: no close wait in case of process shut down net/smc: introduce a delay net/smc: terminate link group if out-of-sync is received net/smc: longer delay for client link group removal net/smc: adapt send request completion notification net/smc: adjust net_device refcount net/smc: take RCU read lock for routing cache lookup net/smc: add receive timeout check net/smc: add missing dev_put net: stmmac: Cocci spatch "of_table" lan78xx: Use default values loaded from EEPROM/OTP after reset lan78xx: Allow EEPROM write for less than MAX_EEPROM_SIZE lan78xx: Fix for eeprom read/write when device auto suspend ...
2017-09-23inet: fix improper empty comparisonJosef Bacik1-1/+1
When doing my reuseport rework I screwed up and changed a if (hlist_empty(&tb->owners)) to if (!hlist_empty(&tb->owners)) This is obviously bad as all of the reuseport/reuse logic was reversed, which caused weird problems like allowing an ipv4 bind conflict if we opened an ipv4 only socket on a port followed by an ipv6 only socket on the same port. Fixes: b9470c27607b ("inet: kill smallest_size and smallest_port") Reported-by: Cole Robinson <crobinso@redhat.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-23net: use inet6_rcv_saddr to compare socketsJosef Bacik1-1/+1
In ipv6_rcv_saddr_equal() we need to use inet6_rcv_saddr(sk) for the ipv6 compare with the fast socket information to make sure we're doing the proper comparisons. Fixes: 637bc8bbe6c0 ("inet: reset tb->fastreuseport when adding a reuseport sk") Reported-and-tested-by: Cole Robinson <crobinso@redhat.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-23net: set tb->fast_sk_familyJosef Bacik1-0/+2
We need to set the tb->fast_sk_family properly so we can use the proper comparison function for all subsequent reuseport bind requests. Fixes: 637bc8bbe6c0 ("inet: reset tb->fastreuseport when adding a reuseport sk") Reported-and-tested-by: Cole Robinson <crobinso@redhat.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-23net: orphan frags on stand-alone ptype in dev_queue_xmit_nitWillem de Bruijn1-2/+6
Zerocopy skbs frags are copied when the skb is looped to a local sock. Commit 1080e512d44d ("net: orphan frags on receive") introduced calls to skb_orphan_frags to deliver_skb and __netif_receive_skb for this. With msg_zerocopy, these skbs can also exist in the tx path and thus loop from dev_queue_xmit_nit. This already calls deliver_skb in its loop. But it does not orphan before a separate pt_prev->func(). Add the missing skb_orphan_frags_rx. Changes v1->v2: handle skb_orphan_frags_rx failure Fixes: 1f8b977ab32d ("sock: enable MSG_ZEROCOPY") Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-22net/smc: no close wait in case of process shut downUrsula Braun1-7/+8
Usually socket closing is delayed if there is still data available in the send buffer to be transmitted. If a process is killed, the delay should be avoided. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-22net/smc: introduce a delayUrsula Braun3-10/+16
The number of outstanding work requests is limited. If all work requests are in use, tx processing is postponed to another scheduling of the tx worker. Switch to a delayed worker to have a gap for tx completion queue events before the next retry. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-22net/smc: terminate link group if out-of-sync is receivedUrsula Braun3-11/+8
An out-of-sync condition can just be detected by the client. If the server receives a CLC DECLINE message indicating an out-of-sync condition for the link groups, the server must clean up the out-of-sync link group. There is no need for an extra third parameter in smc_clc_send_decline(). Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-22net/smc: longer delay for client link group removalUrsula Braun1-4/+12
Client link group creation always follows the server linkgroup creation. If peer creates a new server link group, client has to create a new client link group. If peer reuses a server link group for a new connection, client has to reuse its client link group as well. This patch introduces a longer delay for client link group removal to make sure this link group still exists, once the peer decides to reuse a server link group. This avoids out-of-sync conditions for link groups. If already scheduled, modify the delay. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-22net/smc: adapt send request completion notificationUrsula Braun1-1/+1
The solicited flag is meaningful for the receive completion queue. Ask for next work completion of any type on the send queue. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-22net/smc: adjust net_device refcountUrsula Braun1-1/+3
smc_pnet_fill_entry() uses dev_get_by_name() adding a refcount to ndev. The following smc_pnet_enter() has to reduce the refcount if the entry to be added exists already in the pnet table. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-22net/smc: take RCU read lock for routing cache lookupUrsula Braun1-3/+7
smc_netinfo_by_tcpsk() looks up the routing cache. Such a lookup requires protection by an RCU read lock. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-22net/smc: add receive timeout checkHans Wippel1-0/+2
The SMC receive function currently lacks a timeout check under the condition that no data were received and no data are available. This patch adds such a check. Signed-off-by: Hans Wippel <hwippel@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-22net/smc: add missing dev_putHans Wippel1-0/+1
In the infiniband part, SMC currently uses get_netdev which calls dev_hold on the returned net device. However, the SMC code never calls dev_put on that net device resulting in a wrong reference count. This patch adds a dev_put after the usage of the net device to fix the issue. Signed-off-by: Hans Wippel <hwippel@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-22net: ethtool: Add back transceiver typeFlorian Fainelli1-0/+2
Commit 3f1ac7a700d0 ("net: ethtool: add new ETHTOOL_xLINKSETTINGS API") deprecated the ethtool_cmd::transceiver field, which was fine in premise, except that the PHY library was actually using it to report the type of transceiver: internal or external. Use the first word of the reserved field to put this __u8 transceiver field back in. It is made read-only, and we don't expect the ETHTOOL_xLINKSETTINGS API to be doing anything with this anyway, so this is mostly for the legacy path where we do: ethtool_get_settings() -> dev->ethtool_ops->get_link_ksettings() -> convert_link_ksettings_to_legacy_settings() to have no information loss compared to the legacy get_settings API. Fixes: 3f1ac7a700d0 ("net: ethtool: add new ETHTOOL_xLINKSETTINGS API") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-22net_sched: remove cls_flower idr on failureCong Wang1-6/+9
Fixes: c15ab236d69d ("net/sched: Change cls_flower to use IDR") Cc: Chris Mi <chrism@mellanox.com> Cc: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-21net_sched/hfsc: fix curve activation in hfsc_change_class()Konstantin Khlebnikov1-4/+19
If real-time or fair-share curves are enabled in hfsc_change_class() class isn't inserted into rb-trees yet. Thus init_ed() and init_vf() must be called in place of update_ed() and update_vf(). Remove isn't required because for now curves cannot be disabled. Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-21net_sched: always reset qdisc backlog in qdisc_reset()Konstantin Khlebnikov1-0/+1
SKB stored in qdisc->gso_skb also counted into backlog. Some qdiscs don't reset backlog to zero in ->reset(), for example sfq just dequeue and free all queued skb. Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Fixes: 2ccccf5fb43f ("net_sched: update hierarchical backlog too") Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller2-7/+19
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains two Netfilter fixes for your net tree, they are: 1) Fix NAt compilation with UP, from Geert Uytterhoeven. 2) Fix incorrect number of entries when dumping a set, from Vishwanath Pai. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-21net: change skb->mac_header when Generic XDP calls adjust_headEdward Cree1-0/+1
Since XDP's view of the packet includes the MAC header, moving the start- of-packet with bpf_xdp_adjust_head needs to also update the offset of the MAC header (which is relative to skb->head, not to the skb->data that was changed). Without this, tcpdump sees packets starting from the old MAC header rather than the new one, at least in my tests on the loopback device. Fixes: b5cdae3291f7 ("net: Generic XDP") Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-21net: compat: assert the size of cmsg copied in is as expectedMeng Xu1-0/+7
The actual length of cmsg fetched in during the second loop (i.e., kcmsg - kcmsg_base) could be different from what we get from the first loop (i.e., kcmlen). The main reason is that the two get_user() calls in the two loops (i.e., get_user(ucmlen, &ucmsg->cmsg_len) and __get_user(ucmlen, &ucmsg->cmsg_len)) could cause ucmlen to have different values even they fetch from the same userspace address, as user can race to change the memory content in &ucmsg->cmsg_len across fetches. Although in the second loop, the sanity check if ((char *)kcmsg_base + kcmlen - (char *)kcmsg < CMSG_ALIGN(tmp)) is inplace, it only ensures that the cmsg fetched in during the second loop does not exceed the length of kcmlen, but not necessarily equal to kcmlen. But indicated by the assignment kmsg->msg_controllen = kcmlen, we should enforce that. This patch adds this additional sanity check and ensures that what is recorded in kmsg->msg_controllen is the actual cmsg length. Signed-off-by: Meng Xu <mengxu.gatech@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20packet: hold bind lock when rebinding to fanout hookWillem de Bruijn1-5/+11
Packet socket bind operations must hold the po->bind_lock. This keeps po->running consistent with whether the socket is actually on a ptype list to receive packets. fanout_add unbinds a socket and its packet_rcv/tpacket_rcv call, then binds the fanout object to receive through packet_rcv_fanout. Make it hold the po->bind_lock when testing po->running and rebinding. Else, it can race with other rebind operations, such as that in packet_set_ring from packet_rcv to tpacket_rcv. Concurrent updates can result in a socket being added to a fanout group twice, causing use-after-free KASAN bug reports, among others. Reported independently by both trinity and syzkaller. Verified that the syzkaller reproducer passes after this patch. Fixes: dc99f600698d ("packet: Add fanout support.") Reported-by: nixioaming <nixiaoming@huawei.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>