Age | Commit message (Collapse) | Author | Files | Lines |
|
Active scan support is based on the current passive scan support,
cheered up with beacon requests sent after every channel change.
Co-developed-by: David Girault <david.girault@qorvo.com>
Signed-off-by: David Girault <david.girault@qorvo.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20230310145346.1397068-3-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
In case a passive scan could not discover any PAN, a device may decide
to perform an active scan to force coordinators to send a BEACON
"immediately". Allow users to request to perform an active scan.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20230310145346.1397068-2-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
4 places in the act api code are using 'TCA_' definitions where they
should be using 'TCA_ACT_', which is confusing for the reader, although
functionally they are equivalent.
Cc: Hangbin Liu <haliu@redhat.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Hangbin Liu <haliu@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When IP address protocol field was added in commit 47f0bd503210 ("net: Add
new protocol attribute to IP addresses"), the semantics included the
ability to change the protocol for IPv6 addresses, but not for IPv4
addresses. It seems this was not deliberate, but rather by accident.
A userspace that wants to change the protocol of an address might drop and
recreate the address, but that disrupts routing and is just impractical.
So in this patch, when an IPv4 address is replaced (through RTM_NEWADDR
request with NLM_F_REPLACE flag), update the proto at the address to the
one given in the request, or zero if none is given. This matches the
behavior of IPv6. Previously, any new value given was simply ignored.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
tcf_mirred_act() and tcf_mpls_act() can use skb_network_offset()
instead of relying on skb_mac_header().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We want to remove our use of skb_mac_header() in tx paths,
eg remove skb_reset_mac_header() from __dev_queue_xmit().
Idea is that ndo_start_xmit() can get the mac header
simply looking at skb->data.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We want to remove our use of skb_mac_header() in tx paths,
eg remove skb_reset_mac_header() from __dev_queue_xmit().
Idea is that ndo_start_xmit() can get the mac header
simply looking at skb->data.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When setting the XPS value of a TX queue, warn the user once if the
index of the queue is greater than the number of allocated TX queues.
Previously, this scenario went uncaught. In the best case, it resulted
in unnecessary allocations. In the worst case, it resulted in
out-of-bounds memory references through calls to `netdev_get_tx_queue(
dev, index)`. Therefore, it is important to inform the user but not
worth returning an error and risk downing the netdevice.
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com>
Link: https://lore.kernel.org/r/20230321150725.127229-1-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Leon Romanovsky says:
====================
Extend packet offload to fully support libreswan
The following patches are an outcome of Raed's work to add packet
offload support to libreswan [1].
The series includes:
* Priority support to IPsec policies
* Statistics per-SA (visible through "ip -s xfrm state ..." command)
* Support to IKE policy holes
* Fine tuning to acquire logic.
[1] https://github.com/libreswan/libreswan/pull/986
Link: https://lore.kernel.org/all/cover.1678714336.git.leon@kernel.org
* tag 'ipsec-libreswan-mlx5' of https://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5e: Update IPsec per SA packets/bytes count
net/mlx5e: Use one rule to count all IPsec Tx offloaded traffic
net/mlx5e: Support IPsec acquire default SA
net/mlx5e: Allow policies with reqid 0, to support IKE policy holes
xfrm: copy_to_user_state fetch offloaded SA packets/bytes statistics
xfrm: add new device offload acquire flag
net/mlx5e: Use chains for IPsec policy priority offload
net/mlx5: fs_core: Allow ignore_flow_level on TX dest
net/mlx5: fs_chains: Refactor to detach chains from tc usage
====================
Link: https://lore.kernel.org/r/20230320094722.1009304-1-leon@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When compound pages are enabled, although the mm layer still
returns an array of page pointers, a subset (or all) of them
may have the same page head since a max 180kb skb can span 2
hugepages if it is on the boundary, be a mix of pages and 1 hugepage,
or fit completely in a hugepage. Instead of referencing page head
on all page pointers, use page length arithmetic to only call page
head when referencing a known different page head to avoid touching
a cold cacheline.
Tested:
See next patch with changes to tcp_mmap
Correntess:
On a pair of separate hosts as send with MSG_ZEROCOPY will
force a copy on tx if using loopback alone, check that the SHA
on the message sent is equivalent to checksum on the message received,
since the current program already checks for the length.
echo 1024 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages
./tcp_mmap -s -z
./tcp_mmap -H $DADDR -z
SHA256 is correct
received 2 MB (100 % mmap'ed) in 0.005914 s, 2.83686 Gbit
cpu usage user:0.001984 sys:0.000963, 1473.5 usec per MB, 10 c-switches
Performance:
Run neper between adjacent hosts with the same config
tcp_stream -Z --skip-rx-copy -6 -T 20 -F 1000 --stime-use-proc --test-length=30
Before patch: stime_end=37.670000
After patch: stime_end=30.310000
Signed-off-by: Coco Li <lixiaoyan@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230321081202.2370275-1-lixiaoyan@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Sometimes we need to know which one of backlog queue can be exactly
long enough to cause some latency when debugging this part is needed.
Thus, we can then separate the display of both.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230321015746.96994-1-kerneljasonxing@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Pointer to transport could be checked before allocation of skbuff, thus
there is no need to free skbuff when this pointer is NULL.
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Bobby Eshleman <bobby.eshleman@bytedance.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://lore.kernel.org/r/08d61bef-0c11-c7f9-9266-cb2109070314@sberdevices.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Jiri suggests it reads more naturally to skip the explicit
array size when possible. When we export the symbol we want
to make sure that the size is right but for statics its
not needed.
Link: https://lore.kernel.org/r/20230321044159.1031040-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
rcu_bh is no longer a win, especially for objects freed
with standard call_rcu().
Switch neighbour code to no longer disable BH when not necessary.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
struct ip6_flowlabel are rcu managed, and call_rcu() is used
to delay fl_free_rcu() after RCU grace period.
There is no point disabling BH for pure RCU lookups.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Both in RX and TX, the traffic that performs IPsec packet offload
transformation is accounted by HW only. Consequently, the HW should
be queried for packets/bytes statistics when user asks for such
transformation data.
Signed-off-by: Raed Salem <raeds@nvidia.com>
Link: https://lore.kernel.org/r/d90ec74186452b1509ee94875d942cb777b7181e.1678714336.git.leon@kernel.org
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
During XFRM acquire flow, a default SA is created to be updated later,
once acquire netlink message is handled in user space. When the relevant
policy is offloaded this default SA is also offloaded to IPsec offload
supporting driver, however this SA does not have context suitable for
offloading in HW, nor is interesting to offload to HW, consequently needs
a special driver handling apart from other offloaded SA(s).
Add a special flag that marks such SA so driver can handle it correctly.
Signed-off-by: Raed Salem <raeds@nvidia.com>
Link: https://lore.kernel.org/r/f5da0834d8c6b82ab9ba38bd4a0c55e71f0e3dab.1678714336.git.leon@kernel.org
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Use PACKET_SOCK_QDISC_BYPASS atomic bit instead of a pointer.
This removes one indirect call in fast path,
and READ_ONCE()/WRITE_ONCE() annotations as well.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Suggested-by: Willem de Bruijn <willemb@google.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We can change tcp_sk() to propagate its argument const qualifier,
thanks to container_of_const().
We have two places where a const sock pointer has to be upgraded
to a write one. We have been using const qualifier for lockless
listeners to clearly identify points where writes could happen.
Add tcp_sk_rw() helper to better document these.
tcp_inbound_md5_hash(), __tcp_grow_window(), tcp_reset_check()
and tcp_rack_reo_wnd() get an additional const qualififer
for their @tp local variables.
smc_check_reset_syn_req() also needs a similar change.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We can change mptcp_sk() to propagate its argument const qualifier,
thanks to container_of_const().
We need to change few things to avoid build errors:
mptcp_set_datafin_timeout() and mptcp_rtx_head() have to accept
non-const sk pointers.
@msk local variable in mptcp_pending_tail() must be const.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Matthieu Baerts <matthieu.baerts@tessares.net>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We can change smc_sk() to propagate its argument const qualifier,
thanks to container_of_const().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Karsten Graul <kgraul@linux.ibm.com>
Cc: Wenjia Zhang <wenjia@linux.ibm.com>
Cc: Jan Karcher <jaka@linux.ibm.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We can change pkt_sk() to propagate const qualifier of its argument,
thanks to container_of_const()
This should avoid some potential errors caused by accidental
(const -> not_const) promotion.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
net/wireless/nl80211.c
b27f07c50a73 ("wifi: nl80211: fix puncturing bitmap policy")
cbbaf2bb829b ("wifi: nl80211: add a command to enable/disable HW timestamping")
https://lore.kernel.org/all/20230314105421.3608efae@canb.auug.org.au
tools/testing/selftests/net/Makefile
62199e3f1658 ("selftests: net: Add VXLAN MDB test")
13715acf8ab5 ("selftest: Add test for bind() conflicts.")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, wifi and ipsec.
A little more changes than usual, but it's pretty normal for us that
the rc3/rc4 PRs are oversized as people start testing in earnest.
Possibly an extra boost from people deploying the 6.1 LTS but that's
more of an unscientific hunch.
Current release - regressions:
- phy: mscc: fix deadlock in phy_ethtool_{get,set}_wol()
- virtio: vsock: don't use skbuff state to account credit
- virtio: vsock: don't drop skbuff on copy failure
- virtio_net: fix page_to_skb() miscalculating the memory size
Current release - new code bugs:
- eth: correct xdp_features after device reconfig
- wifi: nl80211: fix the puncturing bitmap policy
- net/mlx5e: flower:
- fix raw counter initialization
- fix missing error code
- fix cloned flow attribute
- ipa:
- fix some register validity checks
- fix a surprising number of bad offsets
- kill FILT_ROUT_CACHE_CFG IPA register
Previous releases - regressions:
- tcp: fix bind() conflict check for dual-stack wildcard address
- veth: fix use after free in XDP_REDIRECT when skb headroom is small
- ipv4: fix incorrect table ID in IOCTL path
- ipvlan: make skb->skb_iif track skb->dev for l3s mode
- mptcp:
- fix possible deadlock in subflow_error_report
- fix UaFs when destroying unaccepted and listening sockets
- dsa: mv88e6xxx: fix max_mtu of 1492 on 6165, 6191, 6220, 6250, 6290
Previous releases - always broken:
- tcp: tcp_make_synack() can be called from process context, don't
assume preemption is disabled when updating stats
- netfilter: correct length for loading protocol registers
- virtio_net: add checking sq is full inside xdp xmit
- bonding: restore IFF_MASTER/SLAVE flags on bond enslave Ethertype
change
- phy: nxp-c45-tja11xx: fix MII_BASIC_CONFIG_REV bit number
- eth: i40e: fix crash during reboot when adapter is in recovery mode
- eth: ice: avoid deadlock on rtnl lock when auxiliary device
plug/unplug meets bonding
- dsa: mt7530:
- remove now incorrect comment regarding port 5
- set PLL frequency and trgmii only when trgmii is used
- eth: mtk_eth_soc: reset PCS state when changing interface types
Misc:
- ynl: another license adjustment
- move the TCA_EXT_WARN_MSG attribute for tc action"
* tag 'net-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (108 commits)
selftests: bonding: add tests for ether type changes
bonding: restore bond's IFF_SLAVE flag if a non-eth dev enslave fails
bonding: restore IFF_MASTER/SLAVE flags on bond enslave ether type change
net: renesas: rswitch: Fix GWTSDIE register handling
net: renesas: rswitch: Fix the output value of quote from rswitch_rx()
ethernet: sun: add check for the mdesc_grab()
net: ipa: fix some register validity checks
net: ipa: kill FILT_ROUT_CACHE_CFG IPA register
net: ipa: add two missing declarations
net: ipa: reg: include <linux/bug.h>
net: xdp: don't call notifiers during driver init
net/sched: act_api: add specific EXT_WARN_MSG for tc action
Revert "net/sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy"
net: dsa: microchip: fix RGMII delay configuration on KSZ8765/KSZ8794/KSZ8795
ynl: make the tooling check the license
ynl: broaden the license even more
tools: ynl: make definitions optional again
hsr: ratelimit only when errors are printed
qed/qed_mng_tlv: correctly zero out ->min instead of ->hour
selftests: net: devlink_port_split.py: skip test if no suitable device available
...
|
|
The refcount wr_tx_refcnt may cause cache thrashing problems among
cores and we can use percpu ref to mitigate this issue here. We
gain some performance improvement with percpu ref here on our
customized smc-r verion. Applying cache alignment may also mitigate
this problem but it seem more reasonable to use percpu ref here.
We can also replace wr_reg_refcnt with one percpu reference like
wr_tx_refcnt.
redis-benchmark on smc-r with atomic wr_tx_refcnt:
SET: 525707.06 requests per second, p50=0.087 msec
GET: 554877.38 requests per second, p50=0.087 msec
redis-benchmark on the percpu_ref version:
SET: 540482.06 requests per second, p50=0.087 msec
GET: 570711.12 requests per second, p50=0.079 msec
Cases are like "redis-benchmark -h x.x.x.x -q -t set,get -P 1 -n
5000000 -c 50 -d 10 --threads 4".
Signed-off-by: Kai Shen <KaiShen@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now both raw_v4_match() and raw_v6_match() accept a const socket,
raw_lookup() can do the same to clarify its role.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This clarifies raw_v4_match() intent.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This clarifies raw_v6_match() intent.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This clarifies __udp_v6_is_mcast_sock() intent.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
inet6_mc_check() is essentially a read-only function.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This clarifies __udp_is_mcast_sock() intent.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This clarifies ip_mc_sf_allow() intent.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We can change inet_sk() to propagate const qualifier of its argument.
This should avoid some potential errors caused by accidental
(const -> not_const) promotion.
Other helpers like tcp_sk(), udp_sk(), raw_sk() will be handled
in separate patch series.
v2: use container_of_const() as advised by Jakub and Linus
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/netdev/20230315142841.3a2ac99a@kernel.org/
Link: https://lore.kernel.org/netdev/CAHk-=wiOf12nrYEF2vJMcucKjWPN-Ns_SW9fA7LwST_2Dzp7rw@mail.gmail.com/
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Not only this removes some READ_ONCE()/WRITE_ONCE(),
this also removes one integer.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Instead of consuming 32 bits for po->running, use
one available bit in po->flags.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
po->has_vnet_hdr can be read locklessly.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
tp_loss can be read locklessly.
Convert it to an atomic flag to avoid races.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is to use existing space in po->flags, and reclaim
the storage used by the non atomic bit fields.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
tp_tstamp is read locklessly.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
po->auxdata can be read while another thread
is changing its value, potentially raising KCSAN splat.
Convert it to PACKET_SOCK_AUXDATA flag.
Fixes: 8dc419447415 ("[PACKET]: Add optional checksum computation for recvmsg")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzbot/KCAN reported that po->origdev can be read
while another thread is changing its value.
We can avoid this splat by converting this field
to an actual bit.
Following patches will convert remaining 1bit fields.
Fixes: 80feaacb8a64 ("[AF_PACKET]: Add option to return orig_dev to userspace.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
po->xmit can be set from setsockopt(PACKET_QDISC_BYPASS),
while read locklessly.
Use READ_ONCE()/WRITE_ONCE() to avoid potential load/store
tearing issues.
Fixes: d346a3fae3ff ("packet: introduce PACKET_QDISC_BYPASS socket option")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
unix_poll() and unix_dgram_poll() read sk->sk_err
without any lock held.
Add relevant READ_ONCE()/WRITE_ONCE() annotations.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
mptcp_poll() reads sk->sk_err without socket lock held/owned.
Add READ_ONCE() and WRITE_ONCE() to avoid load/store tearing.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
tcp_poll() reads sk->sk_err without socket lock held/owned.
We should used READ_ONCE() here, and update writers
to use WRITE_ONCE().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This field can be read/written without lock synchronization.
tcp and dccp have been handled in different patches.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This field can be read/written without lock synchronization.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This field can be read/written without lock synchronization.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Setting timestamp filter was explicitly disabled on vlan devices in
containers because it might affect other processes on the host. But it's
absolutely legit in case when real device is in the same namespace.
Fixes: 873017af7784 ("vlan: disable SIOCSHWTSTAMP in container")
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the upcoming VXLAN MDB implementation, the 0.0.0.0 and :: MDB entries
will act as catchall entries for unregistered IP multicast traffic in a
similar fashion to the 00:00:00:00:00:00 VXLAN FDB entry that is used to
transmit BUM traffic.
In deployments where inter-subnet multicast forwarding is used, not all
the VTEPs in a tenant domain are members in all the broadcast domains.
It is therefore advantageous to transmit BULL (broadcast, unknown
unicast and link-local multicast) and unregistered IP multicast traffic
on different tunnels. If the same tunnel was used, a VTEP only
interested in IP multicast traffic would also pull all the BULL traffic
and drop it as it is not a member in the originating broadcast domain
[1].
Prepare for this change by allowing the 0.0.0.0 group address in the
common rtnetlink MDB code and forbid it in the bridge driver. A similar
change is not needed for IPv6 because the common code only validates
that the group address is not the all-nodes address.
[1] https://datatracker.ietf.org/doc/html/draft-ietf-bess-evpn-irb-mcast#section-2.6
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|