Age | Commit message (Collapse) | Author | Files | Lines |
|
Provide a count of class types for a summary of MAD packets. The example
shows one way to filter the trace data based on management class.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The program nrm creates a cgroup and attaches a BPF program to the
cgroup for testing HBM (Host Bandwidth Manager) for egress traffic.
One still needs to create network traffic. This can be done through
netesto, netperf or iperf3.
A follow-up patch contains a script to create traffic.
USAGE: hbm [-d] [-l] [-n <id>] [-r <rate>] [-s] [-t <secs>]
[-w] [-h] [prog]
Where:
-d Print BPF trace debug buffer
-l Also limit flows doing loopback
-n <#> To create cgroup "/hbm#" and attach prog. Default is /nrm1
This is convenient when testing HBM in more than 1 cgroup
-r <rate> Rate limit in Mbps
-s Get HBM stats (marked, dropped, etc.)
-t <time> Exit after specified seconds (deault is 0)
-w Work conserving flag. cgroup can increase its bandwidth
beyond the rate limit specified while there is available
bandwidth. Current implementation assumes there is only
NIC (eth0), but can be extended to support multiple NICs.
Currrently only supported for egress. Note, this is just
a proof of concept.
-h Print this info
prog BPF program file name. Name defaults to hbm_out_kern.o
More information about HBM can be found in the paper "BPF Host Resource
Management" presented at the 2018 Linux Plumbers Conference, Networking Track
(http://vger.kernel.org/lpc_net2018_talks/LPC%20BPF%20Network%20Resource%20Paper.pdf)
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
A cgroup skb BPF program to limit cgroup output bandwidth.
It uses a modified virtual token bucket queue to limit average
egress bandwidth. The implementation uses credits instead of tokens.
Negative credits imply that queueing would have happened (this is
a virtual queue, so no queueing is done by it. However, queueing may
occur at the actual qdisc (which is not used for rate limiting).
This implementation uses 3 thresholds, one to start marking packets and
the other two to drop packets:
CREDIT
- <--------------------------|------------------------> +
| | | 0
| Large pkt |
| drop thresh |
Small pkt drop Mark threshold
thresh
The effect of marking depends on the type of packet:
a) If the packet is ECN enabled, then the packet is ECN ce marked.
The current mark threshold is tuned for DCTCP.
c) Else, it is dropped if it is a large packet.
If the credit is below the drop threshold, the packet is dropped.
Note that dropping a packet through the BPF program does not trigger CWR
(Congestion Window Reduction) in TCP packets. A future patch will add
support for triggering CWR.
This BPF program actually uses 2 drop thresholds, one threshold
for larger packets (>= 120 bytes) and another for smaller packets. This
protects smaller packets such as SYNs, ACKs, etc.
The default bandwidth limit is set at 1Gbps but this can be changed by
a user program through a shared BPF map. In addition, by default this BPF
program does not limit connections using loopback. This behavior can be
overwritten by the user program. There is also an option to calculate
some statistics, such as percent of packets marked or dropped, which
the user program can access.
A latter patch provides such a program (hbm.c)
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Some samples don't really need the magic of bpf_load,
switch them to libbpf.
v2: - specify program types.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
bpftool can do all the things load_sock_ops used to do, and more.
Point users to bpftool instead of maintaining this sample utility.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
This commit converts the xdpsock sample application to use the AF_XDP
functions present in libbpf. This cuts down the size of it by nearly
300 lines of code.
The default ring sizes plus the batch size has been increased and the
size of the umem area has decreased. This so that the sample application
will provide higher throughput. Note also that the shared umem code
has been removed from the sample as this is not supported by libbpf
at this point in time.
Tested-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Some of XDP samples that are attaching the bpf program to the interface
via libbpf's bpf_set_link_xdp_fd are still using the bpf_load.c for
loading and manipulating the ebpf program and maps. Convert them to do
this through libbpf usage and remove bpf_load from the picture.
While at it remove what looks like debug leftover in
xdp_redirect_map_user.c
In xdp_redirect_cpu, change the way that the program to be loaded onto
interface is chosen - user now needs to pass the program's section name
instead of the relative number. In case of typo print out the section
names to choose from.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
x86 compilation has required asm goto support since 4.17.
Since clang does not support asm goto, at 4.17,
Commit b1ae32dbab50 ("x86/cpufeature: Guard asm_volatile_goto usage
for BPF compilation") worked around the issue by permitting an
alternative implementation without asm goto for clang.
At 5.0, more asm goto usages appeared.
[yhs@148 x86]$ egrep -r asm_volatile_goto
include/asm/cpufeature.h: asm_volatile_goto("1: jmp 6f\n"
include/asm/jump_label.h: asm_volatile_goto("1:"
include/asm/jump_label.h: asm_volatile_goto("1:"
include/asm/rmwcc.h: asm_volatile_goto (fullop "; j" #cc " %l[cc_label]" \
include/asm/uaccess.h: asm_volatile_goto("\n" \
include/asm/uaccess.h: asm_volatile_goto("\n" \
[yhs@148 x86]$
Compiling samples/bpf directories, most bpf programs failed
compilation with error messages like:
In file included from /home/yhs/work/bpf-next/samples/bpf/xdp_sample_pkts_kern.c:2:
In file included from /home/yhs/work/bpf-next/include/linux/ptrace.h:6:
In file included from /home/yhs/work/bpf-next/include/linux/sched.h:15:
In file included from /home/yhs/work/bpf-next/include/linux/sem.h:5:
In file included from /home/yhs/work/bpf-next/include/uapi/linux/sem.h:5:
In file included from /home/yhs/work/bpf-next/include/linux/ipc.h:9:
In file included from /home/yhs/work/bpf-next/include/linux/refcount.h:72:
/home/yhs/work/bpf-next/arch/x86/include/asm/refcount.h:70:9: error: 'asm goto' constructs are not supported yet
return GEN_BINARY_SUFFIXED_RMWcc(LOCK_PREFIX "subl",
^
/home/yhs/work/bpf-next/arch/x86/include/asm/rmwcc.h:67:2: note: expanded from macro 'GEN_BINARY_SUFFIXED_RMWcc'
__GEN_RMWcc(op " %[val], %[var]\n\t" suffix, var, cc, \
^
/home/yhs/work/bpf-next/arch/x86/include/asm/rmwcc.h:21:2: note: expanded from macro '__GEN_RMWcc'
asm_volatile_goto (fullop "; j" #cc " %l[cc_label]" \
^
/home/yhs/work/bpf-next/include/linux/compiler_types.h:188:37: note: expanded from macro 'asm_volatile_goto'
#define asm_volatile_goto(x...) asm goto(x)
Most implementation does not even provide an alternative
implementation. And it is also not practical to make changes
for each call site.
This patch workarounded the asm goto issue by redefining the macro like below:
#define asm_volatile_goto(x...) asm volatile("invalid use of asm_volatile_goto")
If asm_volatile_goto is not used by bpf programs, which is typically the case, nothing bad
will happen. If asm_volatile_goto is used by bpf programs, which is incorrect, the compiler
will issue an error since "invalid use of asm_volatile_goto" is not valid assembly codes.
With this patch, all bpf programs under samples/bpf can pass compilation.
Note that bpf programs under tools/testing/selftests/bpf/ compiled fine as
they do not access kernel internal headers.
Fixes: e769742d3584 ("Revert "x86/jump-labels: Macrofy inline assembly code to work around GCC inlining bugs"")
Fixes: 18fe58229d80 ("x86, asm: change the GEN_*_RMWcc() macros to not quote the condition")
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
"Kbuild core:
- remove unneeded $(call cc-option,...) switches
- consolidate Clang compiler flags into CLANG_FLAGS
- announce the deprecation of SUBDIRS
- fix single target build for external module
- simplify the dependencies of 'prepare' stage targets
- allow fixdep to directly write to .*.cmd files
- simplify dependency generation for CONFIG_TRIM_UNUSED_KSYMS
- change if_changed_rule to accept multi-line recipe
- move .SECONDARY special target to scripts/Kbuild.include
- remove redundant 'set -e'
- improve parallel execution for CONFIG_HEADERS_CHECK
- misc cleanups
Treewide fixes and cleanups
- set Clang flags correctly for PowerPC boot images
- fix UML build error with CONFIG_GCC_PLUGINS
- remove unneeded patterns from .gitignore files
- refactor firmware/Makefile
- remove unneeded rules for *offsets.s
- avoid unneeded regeneration of intermediate .s files
- clean up ./Kbuild
Modpost:
- remove unused -M, -K options
- fix false positive warnings about section mismatch
- use simple devtable lookup instead of linker magic
- misc cleanups
Coccinelle:
- relax boolinit.cocci checks for overall consistency
- fix warning messages of boolinit.cocci
Other tools:
- improve -dirty check of scripts/setlocalversion
- add a tool to generate compile_commands.json from .*.cmd files"
* tag 'kbuild-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (51 commits)
kbuild: remove unused cmd_gentimeconst
kbuild: remove $(obj)/ prefixes in ./Kbuild
treewide: add intermediate .s files to targets
treewide: remove explicit rules for *offsets.s
firmware: refactor firmware/Makefile
firmware: remove unnecessary patterns from .gitignore
scripts: remove unnecessary ihex2fw and check-lc_ctypes from .gitignore
um: remove unused filechk_gen_header in Makefile
scripts: add a tool to produce a compile_commands.json file
kbuild: add -Werror=implicit-int flag unconditionally
kbuild: add -Werror=strict-prototypes flag unconditionally
kbuild: add -fno-PIE flag unconditionally
scripts: coccinelle: Correct warning message
scripts: coccinelle: only suggest true/false in files that already use them
kbuild: handle part-of-module correctly for *.ll and *.symtypes
kbuild: refactor part-of-module
kbuild: refactor quiet_modtag
kbuild: remove redundant quiet_modtag for $(obj-m)
kbuild: refactor Makefile.asm-generic
user/Makefile: Fix typo and capitalization in comment section
...
|
|
Avoid unneeded recreation of these in the incremental build.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
These explicit rules are unneeded because scripts/Makefile.build
provides a pattern rule to create %.s from %.c
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
Add additional checks in tools/testing/selftests/bpf and
samples/bpf such that if clang/llvm compiler can generate
BTF sections, do not use pahole.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Sample program which shows TCP_SAVE_SYN/TCP_SAVED_SYN usage example:
bpf program which is doing TOS/TCLASS reflection (server would reply
with a same TOS/TCLASS as client).
Signed-off-by: Nikita V. Shirokov <tehnerd@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Pull networking updates from David Miller:
"Highlights:
- Gustavo A. R. Silva keeps working on the implicit switch fallthru
changes.
- Support 802.11ax High-Efficiency wireless in cfg80211 et al, From
Luca Coelho.
- Re-enable ASPM in r8169, from Kai-Heng Feng.
- Add virtual XFRM interfaces, which avoids all of the limitations of
existing IPSEC tunnels. From Steffen Klassert.
- Convert GRO over to use a hash table, so that when we have many
flows active we don't traverse a long list during accumluation.
- Many new self tests for routing, TC, tunnels, etc. Too many
contributors to mention them all, but I'm really happy to keep
seeing this stuff.
- Hardware timestamping support for dpaa_eth/fsl-fman from Yangbo Lu.
- Lots of cleanups and fixes in L2TP code from Guillaume Nault.
- Add IPSEC offload support to netdevsim, from Shannon Nelson.
- Add support for slotting with non-uniform distribution to netem
packet scheduler, from Yousuk Seung.
- Add UDP GSO support to mlx5e, from Boris Pismenny.
- Support offloading of Team LAG in NFP, from John Hurley.
- Allow to configure TX queue selection based upon RX queue, from
Amritha Nambiar.
- Support ethtool ring size configuration in aquantia, from Anton
Mikaev.
- Support DSCP and flowlabel per-transport in SCTP, from Xin Long.
- Support list based batching and stack traversal of SKBs, this is
very exciting work. From Edward Cree.
- Busyloop optimizations in vhost_net, from Toshiaki Makita.
- Introduce the ETF qdisc, which allows time based transmissions. IGB
can offload this in hardware. From Vinicius Costa Gomes.
- Add parameter support to devlink, from Moshe Shemesh.
- Several multiplication and division optimizations for BPF JIT in
nfp driver, from Jiong Wang.
- Lots of prepatory work to make more of the packet scheduler layer
lockless, when possible, from Vlad Buslov.
- Add ACK filter and NAT awareness to sch_cake packet scheduler, from
Toke Høiland-Jørgensen.
- Support regions and region snapshots in devlink, from Alex Vesker.
- Allow to attach XDP programs to both HW and SW at the same time on
a given device, with initial support in nfp. From Jakub Kicinski.
- Add TLS RX offload and support in mlx5, from Ilya Lesokhin.
- Use PHYLIB in r8169 driver, from Heiner Kallweit.
- All sorts of changes to support Spectrum 2 in mlxsw driver, from
Ido Schimmel.
- PTP support in mv88e6xxx DSA driver, from Andrew Lunn.
- Make TCP_USER_TIMEOUT socket option more accurate, from Jon
Maxwell.
- Support for templates in packet scheduler classifier, from Jiri
Pirko.
- IPV6 support in RDS, from Ka-Cheong Poon.
- Native tproxy support in nf_tables, from Máté Eckl.
- Maintain IP fragment queue in an rbtree, but optimize properly for
in-order frags. From Peter Oskolkov.
- Improvde handling of ACKs on hole repairs, from Yuchung Cheng"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1996 commits)
bpf: test: fix spelling mistake "REUSEEPORT" -> "REUSEPORT"
hv/netvsc: Fix NULL dereference at single queue mode fallback
net: filter: mark expected switch fall-through
xen-netfront: fix warn message as irq device name has '/'
cxgb4: Add new T5 PCI device ids 0x50af and 0x50b0
net: dsa: mv88e6xxx: missing unlock on error path
rds: fix building with IPV6=m
inet/connection_sock: prefer _THIS_IP_ to current_text_addr
net: dsa: mv88e6xxx: bitwise vs logical bug
net: sock_diag: Fix spectre v1 gadget in __sock_diag_cmd()
ieee802154: hwsim: using right kind of iteration
net: hns3: Add vlan filter setting by ethtool command -K
net: hns3: Set tx ring' tc info when netdev is up
net: hns3: Remove tx ring BD len register in hns3_enet
net: hns3: Fix desc num set to default when setting channel
net: hns3: Fix for phy link issue when using marvell phy driver
net: hns3: Fix for information of phydev lost problem when down/up
net: hns3: Fix for command format parsing error in hclge_is_all_function_id_zero
net: hns3: Add support for serdes loopback selftest
bnxt_en: take coredump_record structure off stack
...
|
|
Convert xdpsock_user.c to use libbpf instead of bpf_load.o.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Convert xdp_fwd_user.c to use libbpf instead of bpf_load.o.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
To smoothly test BTF supported binary on samples/bpf,
let samples/bpf/Makefile probe llc, pahole and
llvm-objcopy for BPF support and use them
like tools/testing/selftests/bpf/Makefile
changed from the commit c0fa1b6c3efc ("bpf: btf:
Add BTF tests").
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
In preparation for enabling command line LDLIBS, re-name HOST_LOADLIBES
to KBUILD_HOSTLDLIBS as the internal use only flags. Also rename
existing usage to HOSTLDLIBS for consistency. This should not have any
visible effects.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
In preparation for enabling command line CFLAGS, re-name HOSTCFLAGS to
KBUILD_HOSTCFLAGS as the internal use only flags. This should not have
any visible effects.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
Add an example program showing how to sample packets from XDP using the
perf event buffer. The example userspace program just prints the ethernet
header for every packet sampled.
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Alexei Starovoitov says:
====================
pull-request: bpf-next 2018-05-24
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Björn Töpel cleans up AF_XDP (removes rebind, explicit cache alignment from uapi, etc).
2) David Ahern adds mtu checks to bpf_ipv{4,6}_fib_lookup() helpers.
3) Jesper Dangaard Brouer adds bulking support to ndo_xdp_xmit.
4) Jiong Wang adds support for indirect and arithmetic shifts to NFP
5) Martin KaFai Lau cleans up BTF uapi and makes the btf_header extensible.
6) Mathieu Xhonneux adds an End.BPF action to seg6local with BPF helpers allowing
to edit/grow/shrink a SRH and apply on a packet generic SRv6 actions.
7) Sandipan Das adds support for bpf2bpf function calls in ppc64 JIT.
8) Yonghong Song adds BPF_TASK_FD_QUERY command for introspection of tracing events.
9) other misc fixes from Gustavo A. R. Silva, Sirio Balmelli, John Fastabend, and Magnus Karlsson
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is mostly to test kprobe/uprobe which needs kernel headers.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
S390 bpf_jit.S is removed in net-next and had changes in 'net',
since that code isn't used any more take the removal.
TLS data structures split the TX and RX components in 'net-next',
put the new struct members from the bug fix in 'net' into the RX
part.
The 'net-next' tree had some reworking of how the ERSPAN code works in
the GRE tunneling code, overlapping with a one-line headroom
calculation fix in 'net'.
Overlapping changes in __sock_map_ctx_update_elem(), keep the bits
that read the prog members via READ_ONCE() into local variables
before using them.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Building samples with clang ignores the $(Q) setting, always
printing full command to the output. Make it less verbose.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Make complains that it doesn't know how to make libbpf.a:
scripts/Makefile.host:106: target 'samples/bpf/../../tools/lib/bpf/libbpf.a' doesn't match the target pattern
Now that we have it as a dependency of the sources simply add libbpf.a
to libraries not objects.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
There are many ways users may compile samples, some of them got
broken by commit 5f9380572b4b ("samples: bpf: compile and link
against full libbpf"). Improve path resolution and make libbpf
building a dependency of source files to force its build.
Samples should now again build with any of:
cd samples/bpf; make
make samples/bpf/
make -C samples/bpf
cd samples/bpf; make O=builddir
make samples/bpf/ O=builddir
make -C samples/bpf O=builddir
export KBUILD_OUTPUT=builddir
make samples/bpf/
make -C samples/bpf
Fixes: 5f9380572b4b ("samples: bpf: compile and link against full libbpf")
Reported-by: Björn Töpel <bjorn.topel@gmail.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Workaround for the sake of BPF compilation which utilizes kernel
headers, but clang does not support ASM GOTO and fails the build.
Fixes: d0266046ad54 ("x86: Remove FAST_FEATURE_TESTS")
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: daniel@iogearbox.net
Cc: peterz@infradead.org
Cc: netdev@vger.kernel.org
Cc: bp@alien8.de
Cc: yhs@fb.com
Cc: kernel-team@fb.com
Cc: torvalds@linux-foundation.org
Cc: davem@davemloft.net
Link: https://lkml.kernel.org/r/20180513193222.1997938-1-ast@kernel.org
|
|
Now that we can use full powers of libbpf in BPF samples, we
should perhaps make the simplest XDP programs not depend on
bpf_load helpers. This way newcomers will be exposed to the
recommended library from the start.
Use of bpf_prog_load_xattr() will also make it trivial to later
on request offload of the programs by simply adding ifindex to
the xattr.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
There are two copies of event reading loop - in bpftool and
trace_helpers "library". Consolidate them and move the code
to libbpf. Return codes from trace_helpers are kept, but
renamed to include LIBBPF prefix.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
samples/bpf currently cherry-picks object files from tools/lib/bpf
to link against. Just compile the full library and link statically
against it.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Simple example of fast-path forwarding. It has a serious flaw
in not verifying the egress device index supports XDP forwarding.
If the egress device does not packets are dropped.
Take this only as a simple example of fast-path forwarding.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
This is a sample application for AF_XDP sockets. The application
supports three different modes of operation: rxdrop, txonly and l2fwd.
To show-case a simple round-robin load-balancing between a set of
sockets in an xskmap, set the RR_LB compile time define option to 1 in
"xdpsock.h".
v2: The entries variable was calculated twice in {umem,xq}_nb_avail.
Co-authored-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
There is no functionality change in this patch. The common-purpose
trace functions, including perf_event polling and ksym lookup,
are moved from trace_output_user.c and bpf_load.c to
selftests/bpf/trace_helpers.c so that these function can
be reused later in selftests.
Acked-by: Alexei Starovoitov <ast@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Move the testsuite to
selftests/bpf/{test_tunnel_kern.c, test_tunnel.sh}
Signed-off-by: William Tu <u9012063@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
adding bpf's sample program which is using bpf_xdp_adjust_tail helper
by generating ICMPv4 "packet to big" message if ingress packet's size is
bigger then 600 bytes
Signed-off-by: Nikita V. Shirokov <tehnerd@tehnerd.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
add empty raw_tracepoint bpf program to test overhead similar
to kprobe and traditional tracepoint tests
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
CPU is active when have running tasks on it and CPUFreq governor can
select different operating points (OPP) according to different workload;
we use 'pstate' to present CPU state which have running tasks with one
specific OPP. On the other hand, CPU is idle which only idle task on
it, CPUIdle governor can select one specific idle state to power off
hardware logics; we use 'cstate' to present CPU idle state.
Based on trace events 'cpu_idle' and 'cpu_frequency' we can accomplish
the duration statistics for every state. Every time when CPU enters
into or exits from idle states, the trace event 'cpu_idle' is recorded;
trace event 'cpu_frequency' records the event for CPU OPP changing, so
it's easily to know how long time the CPU stays in the specified OPP,
and the CPU must be not in any idle state.
This patch is to utilize the mentioned trace events for pstate and
cstate statistics. To achieve more accurate profiling data, the program
uses below sequence to insure CPU running/idle time aren't missed:
- Before profiling the user space program wakes up all CPUs for once, so
can avoid to missing account time for CPU staying in idle state for
long time; the program forces to set 'scaling_max_freq' to lowest
frequency and then restore 'scaling_max_freq' to highest frequency,
this can ensure the frequency to be set to lowest frequency and later
after start to run workload the frequency can be easily to be changed
to higher frequency;
- User space program reads map data and update statistics for every 5s,
so this is same with other sample bpf programs for avoiding big
overload introduced by bpf program self;
- When send signal to terminate program, the signal handler wakes up
all CPUs, set lowest frequency and restore highest frequency to
'scaling_max_freq'; this is exactly same with the first step so
avoid to missing account CPU pstate and cstate time during last
stage. Finally it reports the latest statistics.
The program has been tested on Hikey board with octa CA53 CPUs, below
is one example for statistics result, the format mainly follows up
Jesper Dangaard Brouer suggestion.
Jesper reminds to 'get printf to pretty print with thousands separators
use %' and setlocale(LC_NUMERIC, "en_US")', tried three different arm64
GCC toolchains (5.4.0 20160609, 6.2.1 20161016, 6.3.0 20170516) but all
of them cannot support printf flag character %' on arm64 platform, so go
back print number without grouping mode.
CPU states statistics:
state(ms) cstate-0 cstate-1 cstate-2 pstate-0 pstate-1 pstate-2 pstate-3 pstate-4
CPU-0 767 6111 111863 561 31 756 853 190
CPU-1 241 10606 107956 484 125 646 990 85
CPU-2 413 19721 98735 636 84 696 757 89
CPU-3 84 11711 79989 17516 909 4811 5773 341
CPU-4 152 19610 98229 444 53 649 708 1283
CPU-5 185 8781 108697 666 91 671 677 1365
CPU-6 157 21964 95825 581 67 566 684 1284
CPU-7 125 15238 102704 398 20 665 786 1197
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Parse netlink ext attribute to get the error message returned by
the card. Code is partially take from libnl.
We add netlink.h to the uapi include of tools. And we need to
avoid include of userspace netlink header to have a successful
build of sample so nlattr.h has a define to avoid
the inclusion. Using a direct define could have been an issue
as NLMSGERR_ATTR_MAX can change in the future.
We also define SOL_NETLINK if not defined to avoid to have to
copy socket.h for a fixed value.
Signed-off-by: Eric Leblond <eric@regit.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Do not build lib/bpf/bpf.o with this Makefile but use the one from the
library directory. This avoid making a buggy bpf.o file (e.g. missing
symbols).
This patch is useful if some code (e.g. Landlock tests) needs both the
bpf.o (from tools/lib/bpf) and the bpf_load.o (from samples/bpf).
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Creating a bpf sample that shows howto use the XDP 'data_meta'
infrastructure, created by Daniel Borkmann. Very few drivers support
this feature, but I wanted a functional sample to begin with, when
working on adding driver support.
XDP data_meta is about creating a communication channel between BPF
programs. This can be XDP tail-progs, but also other SKB based BPF
hooks, like in this case the TC clsact hook. In this sample I show
that XDP can store info named "mark", and TC/clsact chooses to use
this info and store it into the skb->mark.
It is a bit annoying that XDP and TC samples uses different tools/libs
when attaching their BPF hooks. As the XDP and TC programs need to
cooperate and agree on a struct-layout, it is best/easiest if the two
programs can be contained within the same BPF restricted-C file.
As the bpf-loader, I choose to not use bpf_load.c (or libbpf), but
instead wrote a bash shell scripted named xdp2skb_meta.sh, which
demonstrate howto use the iproute cmdline tools 'tc' and 'ip' for
loading BPF programs. To make it easy for first time users, the shell
script have command line parsing, and support --verbose and --dry-run
mode, if you just want to see/learn the tc+ip command syntax:
# ./xdp2skb_meta.sh --dev ixgbe2 --dry-run
# Dry-run mode: enable VERBOSE and don't call TC+IP
tc qdisc del dev ixgbe2 clsact
tc qdisc add dev ixgbe2 clsact
tc filter add dev ixgbe2 ingress prio 1 handle 1 bpf da obj ./xdp2skb_meta_kern.o sec tc_mark
# Flush XDP on device: ixgbe2
ip link set dev ixgbe2 xdp off
ip link set dev ixgbe2 xdp obj ./xdp2skb_meta_kern.o sec xdp_mark
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
This sample program can be used for monitoring and reporting how many
packets per sec (pps) are received per NIC RX queue index and which
CPU processed the packet. In itself it is a useful tool for quickly
identifying RSS imbalance issues, see below.
The default XDP action is XDP_PASS in-order to provide a monitor
mode. For benchmarking purposes it is possible to specify other XDP
actions on the cmdline --action.
Output below shows an imbalance RSS case where most RXQ's deliver to
CPU-0 while CPU-2 only get packets from a single RXQ. Looking at
things from a CPU level the two CPUs are processing approx the same
amount, BUT looking at the rx_queue_index levels it is clear that
RXQ-2 receive much better service, than other RXQs which all share CPU-0.
Running XDP on dev:i40e1 (ifindex:3) action:XDP_PASS
XDP stats CPU pps issue-pps
XDP-RX CPU 0 900,473 0
XDP-RX CPU 2 906,921 0
XDP-RX CPU total 1,807,395
RXQ stats RXQ:CPU pps issue-pps
rx_queue_index 0:0 180,098 0
rx_queue_index 0:sum 180,098
rx_queue_index 1:0 180,098 0
rx_queue_index 1:sum 180,098
rx_queue_index 2:2 906,921 0
rx_queue_index 2:sum 906,921
rx_queue_index 3:0 180,098 0
rx_queue_index 3:sum 180,098
rx_queue_index 4:0 180,082 0
rx_queue_index 4:sum 180,082
rx_queue_index 5:0 180,093 0
rx_queue_index 5:sum 180,093
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This adds a basic test for bpf_override_return to verify it works. We
override the main function for mounting a btrfs fs so it'll return
-ENOMEM and then make sure that trying to mount a btrfs fs will fail.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Now kbuild core scripts create empty built-in.o where necessary.
Remove "obj- := dummy.o" tricks.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
NACK'd by x86 maintainer.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This adds a basic test for bpf_override_return to verify it works. We
override the main function for mounting a btrfs fs so it'll return
-ENOMEM and then make sure that trying to mount a btrfs fs will fail.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implements port to port forwarding with route table and arp table
lookup for ipv4 packets using bpf_redirect helper function and
lpm_trie map.
Signed-off-by: Christina Jacob <Christina.Jacob@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The purpose of this move is to use these files in bpf tests.
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Files removed in 'net-next' had their license header updated
in 'net'. We take the remove from 'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Sample socket_ops BPF program to test the BPF helper function
bpf_getsocketops and the new socket_ops op BPF_SOCKET_OPS_BASE_RTT.
The program provides a base RTT of 80us when the calling flow is
within a DC (as determined by the IPV6 prefix) and the congestion
algorithm is "nv".
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked_by: Alexei Starovoitov <ast@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|