summaryrefslogtreecommitdiff
path: root/samples
AgeCommit message (Collapse)AuthorFilesLines
2019-09-22Merge tag 'rpmsg-v5.4' of ↵Linus Torvalds1-4/+6
git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc Pull rpmsg updates from Bjorn Andersson: "This contains updates to make the rpmsg sample driver more useful, fixes the naming of GLINK devices to avoid naming collisions and a few minor bug fixes. It also updates MAINTAINERS to reflect the move to kernel.org" * tag 'rpmsg-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: rpmsg: glink-smem: Name the edge based on parent remoteproc rpmsg: glink: Use struct_size() helper rpmsg: virtio_rpmsg_bus: replace "%p" with "%pK" MAINTAINERS: rpmsg: fix git tree location rpmsg: core: fix comments samples/rpmsg: Introduce a module parameter for message count samples/rpmsg: Replace print_hex_dump() with print_hex_dump_debug()
2019-09-21Merge tag 'vfio-v5.4-rc1' of git://github.com/awilliam/linux-vfioLinus Torvalds1-31/+8
Pull VFIO updates from Alex Williamson: - Fix spapr iommu error case case (Alexey Kardashevskiy) - Consolidate region type definitions (Cornelia Huck) - Restore saved original PCI state on release (hexin) - Simplify mtty sample driver interrupt path (Parav Pandit) - Support for reporting valid IOVA regions to user (Shameer Kolothum) * tag 'vfio-v5.4-rc1' of git://github.com/awilliam/linux-vfio: vfio_pci: Restore original state on release vfio/type1: remove duplicate retrieval of reserved regions vfio/type1: Add IOVA range capability support vfio/type1: check dma map request is within a valid iova range vfio/spapr_tce: Fix incorrect tce_iommu_group memory free vfio-mdev/mtty: Simplify interrupt generation vfio: re-arrange vfio region definitions vfio/type1: Update iova list on detach vfio/type1: Check reserved region conflict and update iova list vfio/type1: Introduce iova list and add iommu aperture validity check
2019-09-16samples/bpf: fix xdpsock l2fwd tx for unaligned modeCiara Loftus1-1/+1
Preserve the offset of the address of the received descriptor, and include it in the address set for the tx descriptor, so the kernel can correctly locate the start of the packet data. Fixes: 03895e63ff97 ("samples/bpf: add buffer recycling for unaligned chunks to xdpsock") Signed-off-by: Ciara Loftus <ciara.loftus@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-09-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller3-85/+177
Daniel Borkmann says: ==================== The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Add the ability to use unaligned chunks in the AF_XDP umem. By relaxing where the chunks can be placed, it allows to use an arbitrary buffer size and place whenever there is a free address in the umem. Helps more seamless DPDK AF_XDP driver integration. Support for i40e, ixgbe and mlx5e, from Kevin and Maxim. 2) Addition of a wakeup flag for AF_XDP tx and fill rings so the application can wake up the kernel for rx/tx processing which avoids busy-spinning of the latter, useful when app and driver is located on the same core. Support for i40e, ixgbe and mlx5e, from Magnus and Maxim. 3) bpftool fixes for printf()-like functions so compiler can actually enforce checks, bpftool build system improvements for custom output directories, and addition of 'bpftool map freeze' command, from Quentin. 4) Support attaching/detaching XDP programs from 'bpftool net' command, from Daniel. 5) Automatic xskmap cleanup when AF_XDP socket is released, and several barrier/{read,write}_once fixes in AF_XDP code, from Björn. 6) Relicense of bpf_helpers.h/bpf_endian.h for future libbpf inclusion as well as libbpf versioning improvements, from Andrii. 7) Several new BPF kselftests for verifier precision tracking, from Alexei. 8) Several BPF kselftest fixes wrt endianess to run on s390x, from Ilya. 9) And more BPF kselftest improvements all over the place, from Stanislav. 10) Add simple BPF map op cache for nfp driver to batch dumps, from Jakub. 11) AF_XDP socket umem mapping improvements for 32bit archs, from Ivan. 12) Add BPF-to-BPF call and BTF line info support for s390x JIT, from Yauheni. 13) Small optimization in arm64 JIT to spare 1 insns for BPF_MOD, from Jerin. 14) Fix an error check in bpf_tcp_gen_syncookie() helper, from Petar. 15) Various minor fixes and cleanups, from Nathan, Masahiro, Masanari, Peter, Wei, Yue. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-31samples/bpf: use hugepages in xdpsock appKevin Laatz1-5/+10
This patch modifies xdpsock to use mmap instead of posix_memalign. With this change, we can use hugepages when running the application in unaligned chunks mode. Using hugepages makes it more likely that we have physically contiguous memory, which supports the unaligned chunk mode better. Signed-off-by: Kevin Laatz <kevin.laatz@intel.com> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-31samples/bpf: add buffer recycling for unaligned chunks to xdpsockKevin Laatz1-10/+16
This patch adds buffer recycling support for unaligned buffers. Since we don't mask the addr to 2k at umem_reg in unaligned mode, we need to make sure we give back the correct (original) addr to the fill queue. We achieve this using the new descriptor format and associated masks. The new format uses the upper 16-bits for the offset and the lower 48-bits for the addr. Since we have a field for the offset, we no longer need to modify the actual address. As such, all we have to do to get back the original address is mask for the lower 48 bits (i.e. strip the offset and we get the address on it's own). Signed-off-by: Kevin Laatz <kevin.laatz@intel.com> Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-31samples/bpf: add unaligned chunks mode support to xdpsockKevin Laatz1-3/+17
This patch adds support for the unaligned chunks mode. The addition of the unaligned chunks option will allow users to run the application with more relaxed chunk placement in the XDP umem. Unaligned chunks mode can be used with the '-u' or '--unaligned' command line options. Signed-off-by: Kevin Laatz <kevin.laatz@intel.com> Signed-off-by: Ciara Loftus <ciara.loftus@intel.com> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-27samples/rpmsg: Introduce a module parameter for message countSuman Anna1-2/+4
The current rpmsg_client_sample uses a fixed number of messages to be sent to each instance. This is currently set at 100. Introduce an optional module parameter 'count' so that the number of messages to be exchanged can be made flexible. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-27samples/rpmsg: Replace print_hex_dump() with print_hex_dump_debug()Suman Anna1-2/+2
Replace the raw print_hex_dump() call in the rpmsg_sample_cb() function with the equivalent print_hex_dump_debug() better suited for dynamic debug. This switch allows flexibility of controlling this trace through dynamic debug when enabled. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-21samples: bpf: syscall_nrs: use mmap2 if definedIvan Khoronzhuk2-0/+19
For arm32 xdp sockets mmap2 is preferred, so use it if it's defined. Declaration of __NR_mmap can be skipped and it breaks build. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-19vfio-mdev/mtty: Simplify interrupt generationParav Pandit1-31/+8
While generating interrupt, mdev_state is already available for which interrupt is generated. Instead of doing indirect way from state->device->uuid-> to searching state linearly in linked list on every interrupt generation, directly use the available state. Hence, simplify the code to use mdev_state and remove unused helper function with that. Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-08-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-1/+1
Merge conflict of mlx5 resolved using instructions in merge commit 9566e650bf7fdf58384bb06df634f7531ca3a97e. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-18samples/bpf: add use of need_wakeup flag in xdpsockMagnus Karlsson1-72/+120
This commit adds using the need_wakeup flag to the xdpsock sample application. It is turned on by default as we think it is a feature that seems to always produce a performance benefit, if the application has been written taking advantage of it. It can be turned off in the sample app by using the '-m' command line option. The txpush and l2fwd sub applications have also been updated to support poll() with multiple sockets. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski4-94/+84
Daniel Borkmann says: ==================== The following pull-request contains BPF updates for your *net-next* tree. There is a small merge conflict in libbpf (Cc Andrii so he's in the loop as well): for (i = 1; i <= btf__get_nr_types(btf); i++) { t = (struct btf_type *)btf__type_by_id(btf, i); if (!has_datasec && btf_is_var(t)) { /* replace VAR with INT */ t->info = BTF_INFO_ENC(BTF_KIND_INT, 0, 0); <<<<<<< HEAD /* * using size = 1 is the safest choice, 4 will be too * big and cause kernel BTF validation failure if * original variable took less than 4 bytes */ t->size = 1; *(int *)(t+1) = BTF_INT_ENC(0, 0, 8); } else if (!has_datasec && kind == BTF_KIND_DATASEC) { ======= t->size = sizeof(int); *(int *)(t + 1) = BTF_INT_ENC(0, 0, 32); } else if (!has_datasec && btf_is_datasec(t)) { >>>>>>> 72ef80b5ee131e96172f19e74b4f98fa3404efe8 /* replace DATASEC with STRUCT */ Conflict is between the two commits 1d4126c4e119 ("libbpf: sanitize VAR to conservative 1-byte INT") and b03bc6853c0e ("libbpf: convert libbpf code to use new btf helpers"), so we need to pick the sanitation fixup as well as use the new btf_is_datasec() helper and the whitespace cleanup. Looks like the following: [...] if (!has_datasec && btf_is_var(t)) { /* replace VAR with INT */ t->info = BTF_INFO_ENC(BTF_KIND_INT, 0, 0); /* * using size = 1 is the safest choice, 4 will be too * big and cause kernel BTF validation failure if * original variable took less than 4 bytes */ t->size = 1; *(int *)(t + 1) = BTF_INT_ENC(0, 0, 8); } else if (!has_datasec && btf_is_datasec(t)) { /* replace DATASEC with STRUCT */ [...] The main changes are: 1) Addition of core parts of compile once - run everywhere (co-re) effort, that is, relocation of fields offsets in libbpf as well as exposure of kernel's own BTF via sysfs and loading through libbpf, from Andrii. More info on co-re: http://vger.kernel.org/bpfconf2019.html#session-2 and http://vger.kernel.org/lpc-bpf2018.html#session-2 2) Enable passing input flags to the BPF flow dissector to customize parsing and allowing it to stop early similar to the C based one, from Stanislav. 3) Add a BPF helper function that allows generating SYN cookies from XDP and tc BPF, from Petar. 4) Add devmap hash-based map type for more flexibility in device lookup for redirects, from Toke. 5) Improvements to XDP forwarding sample code now utilizing recently enabled devmap lookups, from Jesper. 6) Add support for reporting the effective cgroup progs in bpftool, from Jakub and Takshak. 7) Fix reading kernel config from bpftool via /proc/config.gz, from Peter. 8) Fix AF_XDP umem pages mapping for 32 bit architectures, from Ivan. 9) Follow-up to add two more BPF loop tests for the selftest suite, from Alexei. 10) Add perf event output helper also for other skb-based program types, from Allan. 11) Fix a co-re related compilation error in selftests, from Yonghong. ==================== Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-08-09samples/bpf: xdp_fwd explain bpf_fib_lookup return codesJesper Dangaard Brouer1-2/+17
Make it clear that this XDP program depend on the network stack to do the ARP resolution. This is connected with the BPF_FIB_LKUP_RET_NO_NEIGH return code from bpf_fib_lookup(). Another common mistake (seen via XDP-tutorial) is that users don't realize that sysctl net.ipv{4,6}.conf.all.forwarding setting is honored by bpf_fib_lookup. Reported-by: Anton Protopopov <a.s.protopopov@gmail.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Acked-by: Yonghong Song <yhs@fb.com> Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-09samples/bpf: make xdp_fwd more practically usable via devmap lookupJesper Dangaard Brouer2-17/+33
This address the TODO in samples/bpf/xdp_fwd_kern.c, which points out that the chosen egress index should be checked for existence in the devmap. This can now be done via taking advantage of Toke's work in commit 0cdbb4b09a06 ("devmap: Allow map lookups from eBPF"). This change makes xdp_fwd more practically usable, as this allows for a mixed environment, where IP-forwarding fallback to network stack, if the egress device isn't configured to use XDP. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-09samples/bpf: xdp_fwd rename devmap name to be xdp_tx_portsJesper Dangaard Brouer2-3/+4
The devmap name 'tx_port' came from a copy-paste from xdp_redirect_map which only have a single TX port. Change name to xdp_tx_ports to make it more descriptive. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Acked-by: Yonghong Song <yhs@fb.com> Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-08auxdisplay: Fix a typo in cfag12864b-example.cMasanari Iida1-1/+1
This patch fix a spelling typo in cfag12864b-example.c Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2019-07-25treewide: remove SPDX "WITH Linux-syscall-note" from kernel-space headers againMasahiro Yamada1-1/+1
The "WITH Linux-syscall-note" exception exists for headers exported to user space. It is strange to add it to non-exported headers. Commit 687a3e4d8e61 ("treewide: remove SPDX "WITH Linux-syscall-note" from kernel-space headers") did cleanups some months ago, but it looks like we need to do this periodically. This patch was generated by the following script: git grep -l -e Linux-syscall-note \ -- :*.h :^arch/*/include/uapi/asm/*.h :^include/uapi/ :^tools | while read file do sed -i -e 's/(\(GPL-[^[:space:]]*\) WITH Linux-syscall-note)/\1/g' \ -e 's/ WITH Linux-syscall-note//g' $file done I did not commit drivers/staging/android/uapi/ion.h . This header is not currently exported, but somebody may plan to move it to include/uapi/ when the time comes. I am not sure. Anyway, it will be better to check the license inconsistency in drivers/staging/android/uapi/. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-24samples/bpf: switch trace_output sample to perf_buffer APIAndrii Nakryiko1-29/+14
Convert trace_output sample to libbpf's perf_buffer API. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-07-24samples/bpf: convert xdp_sample_pkts_user to perf_buffer APIAndrii Nakryiko1-44/+17
Convert xdp_sample_pkts_user to libbpf's perf_buffer API. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-07-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds1-1/+1
Pull networking fixes from David Miller: 1) Fix AF_XDP cq entry leak, from Ilya Maximets. 2) Fix handling of PHY power-down on RTL8411B, from Heiner Kallweit. 3) Add some new PCI IDs to iwlwifi, from Ihab Zhaika. 4) Fix handling of neigh timers wrt. entries added by userspace, from Lorenzo Bianconi. 5) Various cases of missing of_node_put(), from Nishka Dasgupta. 6) The new NET_ACT_CT needs to depend upon NF_NAT, from Yue Haibing. 7) Various RDS layer fixes, from Gerd Rausch. 8) Fix some more fallout from TCQ_F_CAN_BYPASS generalization, from Cong Wang. 9) Fix FIB source validation checks over loopback, also from Cong Wang. 10) Use promisc for unsupported number of filters, from Justin Chen. 11) Missing sibling route unlink on failure in ipv6, from Ido Schimmel. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (90 commits) tcp: fix tcp_set_congestion_control() use from bpf hook ag71xx: fix return value check in ag71xx_probe() ag71xx: fix error return code in ag71xx_probe() usb: qmi_wwan: add D-Link DWM-222 A2 device ID bnxt_en: Fix VNIC accounting when enabling aRFS on 57500 chips. net: dsa: sja1105: Fix missing unlock on error in sk_buff() gve: replace kfree with kvfree selftests/bpf: fix test_xdp_noinline on s390 selftests/bpf: fix "valid read map access into a read-only array 1" on s390 net/mlx5: Replace kfree with kvfree MAINTAINERS: update netsec driver ipv6: Unlink sibling route in case of failure liquidio: Replace vmalloc + memset with vzalloc udp: Fix typo in net/ipv4/udp.c net: bcmgenet: use promisc for unsupported filters ipv6: rt6_check should return NULL if 'from' is NULL tipc: initialize 'validated' field of received packets selftests: add a test case for rp_filter fib: relax source validation check for loopback packets mlxsw: spectrum: Do not process learned records with a dummy FID ...
2019-07-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller1-1/+1
Alexei Starovoitov says: ==================== pull-request: bpf 2019-07-18 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) verifier precision propagation fix, from Andrii. 2) BTF size fix for typedefs, from Andrii. 3) a bunch of big endian fixes, from Ilya. 4) wide load from bpf_sock_addr fixes, from Stanislav. 5) a bunch of misc fixes from a number of developers. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-17Merge tag 'vfio-v5.3-rc1' of git://github.com/awilliam/linux-vfioLinus Torvalds2-26/+24
Pull VFIO updates from Alex Williamson: - Static symbol cleanup in mdev samples (Kefeng Wang) - Use vma help in nvlink code (Peng Hao) - Remove unused code in mbochs sample (YueHaibing) - Send uevents around mdev registration (Alex Williamson) * tag 'vfio-v5.3-rc1' of git://github.com/awilliam/linux-vfio: mdev: Send uevents around parent device registration sample/mdev/mbochs: remove set but not used variable 'mdev_state' vfio: vfio_pci_nvlink2: use a vma helper function vfio-mdev/samples: make some symbols static
2019-07-16samples/bpf: build with -D__TARGET_ARCH_$(SRCARCH)Ilya Leoshkevich1-1/+1
While $ARCH can be relatively flexible (see Makefile and tools/scripts/Makefile.arch), $SRCARCH always corresponds to a directory name under arch/. Therefore, build samples with -D__TARGET_ARCH_$(SRCARCH), since that matches the expectations of bpf_helpers.h. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Acked-by: Vasily Gorbik <gor@linux.ibm.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-15docs: driver-api: add a series of orphaned documentsMauro Carvalho Chehab1-1/+1
There are lots of documents under Documentation/*.txt and a few other orphan documents elsehwere that belong to the driver-API book. Move them to their right place. Reviewed-by: Cornelia Huck <cohuck@redhat.com> # vfio-related parts Acked-by: Logan Gunthorpe <logang@deltatee.com> # switchtec Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-15docs: connector: convert to ReST and rename to connector.rstMauro Carvalho Chehab1-1/+1
As it has some function definitions, move them to connector.h. The remaining conversion is actually: - add blank lines and identation in order to identify paragraphs; - fix tables markups; - add some lists markups; - mark literal blocks; - adjust title markups. At its new index.rst, let's add a :orphan: while this is not linked to the main index.rst file, in order to avoid build warnings. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-13Merge tag 'kbuild-v5.3' of ↵Linus Torvalds2-5/+13
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - remove headers_{install,check}_all targets - remove unreasonable 'depends on !UML' from CONFIG_SAMPLES - re-implement 'make headers_install' more cleanly - add new header-test-y syntax to compile-test headers - compile-test exported headers to ensure they are compilable in user-space - compile-test headers under include/ to ensure they are self-contained - remove -Waggregate-return, -Wno-uninitialized, -Wno-unused-value flags - add -Werror=unknown-warning-option for Clang - add 128-bit built-in types support to genksyms - fix missed rebuild of modules.builtin - propagate 'No space left on device' error in fixdep to Make - allow Clang to use its integrated assembler - improve some coccinelle scripts - add a new flag KBUILD_ABS_SRCTREE to request Kbuild to use absolute path for $(srctree). - do not ignore errors when compression utility is missing - misc cleanups * tag 'kbuild-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (49 commits) kbuild: use -- separater intead of $(filter-out ...) for cc-cross-prefix kbuild: Inform user to pass ARCH= for make mrproper kbuild: fix compression errors getting ignored kbuild: add a flag to force absolute path for srctree kbuild: replace KBUILD_SRCTREE with boolean building_out_of_srctree kbuild: remove src and obj from the top Makefile scripts/tags.sh: remove unused environment variables from comments scripts/tags.sh: drop SUBARCH support for ARM kbuild: compile-test kernel headers to ensure they are self-contained kheaders: include only headers into kheaders_data.tar.xz kheaders: remove meaningless -R option of 'ls' kbuild: support header-test-pattern-y kbuild: do not create wrappers for header-test-y kbuild: compile-test exported headers to ensure they are self-contained init/Kconfig: add CONFIG_CC_CAN_LINK kallsyms: exclude kasan local symbols on s390 kbuild: add more hints about SUBDIRS replacement coccinelle: api/stream_open: treat all wait_.*() calls as blocking coccinelle: put_device: Add a cast to an expression for an assignment coccinelle: put_device: Adjust a message construction ...
2019-07-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds47-648/+705
Pull networking updates from David Miller: "Some highlights from this development cycle: 1) Big refactoring of ipv6 route and neigh handling to support nexthop objects configurable as units from userspace. From David Ahern. 2) Convert explored_states in BPF verifier into a hash table, significantly decreased state held for programs with bpf2bpf calls, from Alexei Starovoitov. 3) Implement bpf_send_signal() helper, from Yonghong Song. 4) Various classifier enhancements to mvpp2 driver, from Maxime Chevallier. 5) Add aRFS support to hns3 driver, from Jian Shen. 6) Fix use after free in inet frags by allocating fqdirs dynamically and reworking how rhashtable dismantle occurs, from Eric Dumazet. 7) Add act_ctinfo packet classifier action, from Kevin Darbyshire-Bryant. 8) Add TFO key backup infrastructure, from Jason Baron. 9) Remove several old and unused ISDN drivers, from Arnd Bergmann. 10) Add devlink notifications for flash update status to mlxsw driver, from Jiri Pirko. 11) Lots of kTLS offload infrastructure fixes, from Jakub Kicinski. 12) Add support for mv88e6250 DSA chips, from Rasmus Villemoes. 13) Various enhancements to ipv6 flow label handling, from Eric Dumazet and Willem de Bruijn. 14) Support TLS offload in nfp driver, from Jakub Kicinski, Dirk van der Merwe, and others. 15) Various improvements to axienet driver including converting it to phylink, from Robert Hancock. 16) Add PTP support to sja1105 DSA driver, from Vladimir Oltean. 17) Add mqprio qdisc offload support to dpaa2-eth, from Ioana Radulescu. 18) Add devlink health reporting to mlx5, from Moshe Shemesh. 19) Convert stmmac over to phylink, from Jose Abreu. 20) Add PTP PHC (Physical Hardware Clock) support to mlxsw, from Shalom Toledo. 21) Add nftables SYNPROXY support, from Fernando Fernandez Mancera. 22) Convert tcp_fastopen over to use SipHash, from Ard Biesheuvel. 23) Track spill/fill of constants in BPF verifier, from Alexei Starovoitov. 24) Support bounded loops in BPF, from Alexei Starovoitov. 25) Various page_pool API fixes and improvements, from Jesper Dangaard Brouer. 26) Just like ipv4, support ref-countless ipv6 route handling. From Wei Wang. 27) Support VLAN offloading in aquantia driver, from Igor Russkikh. 28) Add AF_XDP zero-copy support to mlx5, from Maxim Mikityanskiy. 29) Add flower GRE encap/decap support to nfp driver, from Pieter Jansen van Vuuren. 30) Protect against stack overflow when using act_mirred, from John Hurley. 31) Allow devmap map lookups from eBPF, from Toke Høiland-Jørgensen. 32) Use page_pool API in netsec driver, Ilias Apalodimas. 33) Add Google gve network driver, from Catherine Sullivan. 34) More indirect call avoidance, from Paolo Abeni. 35) Add kTLS TX HW offload support to mlx5, from Tariq Toukan. 36) Add XDP_REDIRECT support to bnxt_en, from Andy Gospodarek. 37) Add MPLS manipulation actions to TC, from John Hurley. 38) Add sending a packet to connection tracking from TC actions, and then allow flower classifier matching on conntrack state. From Paul Blakey. 39) Netfilter hw offload support, from Pablo Neira Ayuso" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2080 commits) net/mlx5e: Return in default case statement in tx_post_resync_params mlx5: Return -EINVAL when WARN_ON_ONCE triggers in mlx5e_tls_resync(). net: dsa: add support for BRIDGE_MROUTER attribute pkt_sched: Include const.h net: netsec: remove static declaration for netsec_set_tx_de() net: netsec: remove superfluous if statement netfilter: nf_tables: add hardware offload support net: flow_offload: rename tc_cls_flower_offload to flow_cls_offload net: flow_offload: add flow_block_cb_is_busy() and use it net: sched: remove tcf block API drivers: net: use flow block API net: sched: use flow block API net: flow_offload: add flow_block_cb_{priv, incref, decref}() net: flow_offload: add list handling functions net: flow_offload: add flow_block_cb_alloc() and flow_block_cb_free() net: flow_offload: rename TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_* net: flow_offload: rename TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BIND net: flow_offload: add flow_block_cb_setup_simple() net: hisilicon: Add an tx_desc to adapt HI13X1_GMAC net: hisilicon: Add an rx_desc to adapt HI13X1_GMAC ...
2019-07-09Merge tag 'media/v5.3-1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - new Atmel microship ISC driver - coda has gained support for mpeg2 and mpeg4 - cxusb gained support for analog TV - rockchip staging driver was split into two separate staging drivers - added a new staging driver for Allegro DVT video IP core - added a new staging driver for Amlogic Meson video decoder - lots of improvements and cleanups * tag 'media/v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (398 commits) media: allegro: use new v4l2_m2m_ioctl_try_encoder_cmd funcs media: doc-rst: Fix typos media: radio-raremono: change devm_k*alloc to k*alloc media: stv0297: fix frequency range limit media: rc: Prefer KEY_NUMERIC_* for number buttons on remotes media: dvb_frontend: split dvb_frontend_handle_ioctl function media: mceusb: disable "nonsensical irdata" messages media: rc: remove redundant dev_err message media: cec-notifier: add new notifier functions media: cec: add struct cec_connector_info support media: cec-notifier: rename variables, check kstrdup and n->conn_name media: MAINTAINERS: Add maintainers for Media Controller media: staging: media: tegra-vde: Defer dmabuf's unmapping media: staging: media: tegra-vde: Add IOMMU support media: hdpvr: fix locking and a missing msleep media: v4l2: Test type instead of cfg->type in v4l2_ctrl_new_custom() media: atmel: atmel-isc: fix i386 build error media: v4l2-ctrl: Move compound control initialization media: hantro: Use vb2_get_buffer media: pci: cx88: Change the type of 'missed' to u64 ...
2019-07-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
Two cases of overlapping changes, nothing fancy. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09Merge branch 'sched-core-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: - Remove the unused per rq load array and all its infrastructure, by Dietmar Eggemann. - Add utilization clamping support by Patrick Bellasi. This is a refinement of the energy aware scheduling framework with support for boosting of interactive and capping of background workloads: to make sure critical GUI threads get maximum frequency ASAP, and to make sure background processing doesn't unnecessarily move to cpufreq governor to higher frequencies and less energy efficient CPU modes. - Add the bare minimum of tracepoints required for LISA EAS regression testing, by Qais Yousef - which allows automated testing of various power management features, including energy aware scheduling. - Restructure the former tsk_nr_cpus_allowed() facility that the -rt kernel used to modify the scheduler's CPU affinity logic such as migrate_disable() - introduce the task->cpus_ptr value instead of taking the address of &task->cpus_allowed directly - by Sebastian Andrzej Siewior. - Misc optimizations, fixes, cleanups and small enhancements - see the Git log for details. * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits) sched/uclamp: Add uclamp support to energy_compute() sched/uclamp: Add uclamp_util_with() sched/cpufreq, sched/uclamp: Add clamps for FAIR and RT tasks sched/uclamp: Set default clamps for RT tasks sched/uclamp: Reset uclamp values on RESET_ON_FORK sched/uclamp: Extend sched_setattr() to support utilization clamping sched/core: Allow sched_setattr() to use the current policy sched/uclamp: Add system default clamps sched/uclamp: Enforce last task's UCLAMP_MAX sched/uclamp: Add bucket local max tracking sched/uclamp: Add CPU's clamp buckets refcounting sched/fair: Rename weighted_cpuload() to cpu_runnable_load() sched/debug: Export the newly added tracepoints sched/debug: Add sched_overutilized tracepoint sched/debug: Add new tracepoint to track PELT at se level sched/debug: Add new tracepoints to track PELT at rq level sched/debug: Add a new sched_trace_*() helper functions sched/autogroup: Make autogroup_path() always available sched/wait: Deduplicate code with do-while sched/topology: Remove unused 'sd' parameter from arch_scale_cpu_capacity() ...
2019-07-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller13-60/+377
Daniel Borkmann says: ==================== pull-request: bpf-next 2019-07-03 The following pull-request contains BPF updates for your *net-next* tree. There is a minor merge conflict in mlx5 due to 8960b38932be ("linux/dim: Rename externally used net_dim members") which has been pulled into your tree in the meantime, but resolution seems not that bad ... getting current bpf-next out now before there's coming more on mlx5. ;) I'm Cc'ing Saeed just so he's aware of the resolution below: ** First conflict in drivers/net/ethernet/mellanox/mlx5/core/en_main.c: <<<<<<< HEAD static int mlx5e_open_cq(struct mlx5e_channel *c, struct dim_cq_moder moder, struct mlx5e_cq_param *param, struct mlx5e_cq *cq) ======= int mlx5e_open_cq(struct mlx5e_channel *c, struct net_dim_cq_moder moder, struct mlx5e_cq_param *param, struct mlx5e_cq *cq) >>>>>>> e5a3e259ef239f443951d401db10db7d426c9497 Resolution is to take the second chunk and rename net_dim_cq_moder into dim_cq_moder. Also the signature for mlx5e_open_cq() in ... drivers/net/ethernet/mellanox/mlx5/core/en.h +977 ... and in mlx5e_open_xsk() ... drivers/net/ethernet/mellanox/mlx5/core/en/xsk/setup.c +64 ... needs the same rename from net_dim_cq_moder into dim_cq_moder. ** Second conflict in drivers/net/ethernet/mellanox/mlx5/core/en_main.c: <<<<<<< HEAD int cpu = cpumask_first(mlx5_comp_irq_get_affinity_mask(priv->mdev, ix)); struct dim_cq_moder icocq_moder = {0, 0}; struct net_device *netdev = priv->netdev; struct mlx5e_channel *c; unsigned int irq; ======= struct net_dim_cq_moder icocq_moder = {0, 0}; >>>>>>> e5a3e259ef239f443951d401db10db7d426c9497 Take the second chunk and rename net_dim_cq_moder into dim_cq_moder as well. Let me know if you run into any issues. Anyway, the main changes are: 1) Long-awaited AF_XDP support for mlx5e driver, from Maxim. 2) Addition of two new per-cgroup BPF hooks for getsockopt and setsockopt along with a new sockopt program type which allows more fine-grained pass/reject settings for containers. Also add a sock_ops callback that can be selectively enabled on a per-socket basis and is executed for every RTT to help tracking TCP statistics, both features from Stanislav. 3) Follow-up fix from loops in precision tracking which was not propagating precision marks and as a result verifier assumed that some branches were not taken and therefore wrongly removed as dead code, from Alexei. 4) Fix BPF cgroup release synchronization race which could lead to a double-free if a leaf's cgroup_bpf object is released and a new BPF program is attached to the one of ancestor cgroups in parallel, from Roman. 5) Support for bulking XDP_TX on veth devices which improves performance in some cases by around 9%, from Toshiaki. 6) Allow for lookups into BPF devmap and improve feedback when calling into bpf_redirect_map() as lookup is now performed right away in the helper itself, from Toke. 7) Add support for fq's Earliest Departure Time to the Host Bandwidth Manager (HBM) sample BPF program, from Lawrence. 8) Various cleanups and minor fixes all over the place from many others. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller1-1/+1
Daniel Borkmann says: ==================== pull-request: bpf 2019-07-03 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix the interpreter to properly handle BPF_ALU32 | BPF_ARSH on BE architectures, from Jiong. 2) Fix several bugs in the x32 BPF JIT for handling shifts by 0, from Luke and Xi. 3) Fix NULL pointer deref in btf_type_is_resolve_source_only(), from Stanislav. 4) Properly handle the check that forwarding is enabled on the device in bpf_ipv6_fib_lookup() helper code, from Anton. 5) Fix UAPI bpf_prog_info fields alignment for archs that have 16 bit alignment such as m68k, from Baruch. 6) Fix kernel hanging in unregister_netdevice loop while unregistering device bound to XDP socket, from Ilya. 7) Properly terminate tail update in xskq_produce_flush_desc(), from Nathan. 8) Fix broken always_inline handling in test_lwt_seg6local, from Jiri. 9) Fix bpftool to use correct argument in cgroup errors, from Jakub. 10) Fix detaching dummy prog in XDP redirect sample code, from Prashant. 11) Add Jonathan to AF_XDP reviewers, from Björn. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-03samples/bpf: fix tcp_bpf.readme detach commandStanislav Fomichev1-1/+1
Copy-paste, should be detach, not attach. Signed-off-by: Stanislav Fomichev <sdf@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-03samples/bpf: add sample program that periodically dumps TCP statsStanislav Fomichev2-0/+69
Uses new RTT callback to dump stats every second. $ mkdir -p /tmp/cgroupv2 $ mount -t cgroup2 none /tmp/cgroupv2 $ mkdir -p /tmp/cgroupv2/foo $ echo $$ >> /tmp/cgroupv2/foo/cgroup.procs $ bpftool prog load ./tcp_dumpstats_kern.o /sys/fs/bpf/tcp_prog $ bpftool cgroup attach /tmp/cgroupv2/foo sock_ops pinned /sys/fs/bpf/tcp_prog $ bpftool prog tracelog $ # run neper/netperf/etc Used neper to compare performance with and without this program attached and didn't see any noticeable performance impact. Sample output: <idle>-0 [015] ..s. 2074.128800: 0: dsack_dups=0 delivered=242526 <idle>-0 [015] ..s. 2074.128808: 0: delivered_ce=0 icsk_retransmits=0 <idle>-0 [015] ..s. 2075.130133: 0: dsack_dups=0 delivered=323599 <idle>-0 [015] ..s. 2075.130138: 0: delivered_ce=0 icsk_retransmits=0 <idle>-0 [005] .Ns. 2076.131440: 0: dsack_dups=0 delivered=404648 <idle>-0 [005] .Ns. 2076.131447: 0: delivered_ce=0 icsk_retransmits=0 Cc: Eric Dumazet <edumazet@google.com> Cc: Priyaranjan Jha <priyarjha@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-03bpf: Add support for fq's EDT to HBMbrakmo5-19/+231
Adds support for fq's Earliest Departure Time to HBM (Host Bandwidth Manager). Includes a new BPF program supporting EDT, and also updates corresponding programs. It will drop packets with an EDT of more than 500us in the future unless the packet belongs to a flow with less than 2 packets in flight. This is done so each flow has at least 2 packets in flight, so they will not starve, and also to help prevent delayed ACK timeouts. It will also work with ECN enabled traffic, where the packets will be CE marked if their EDT is more than 50us in the future. The table below shows some performance numbers. The flows are back to back RPCS. One server sending to another, either 2 or 4 flows. One flow is a 10KB RPC, the rest are 1MB RPCs. When there are more than one flow of a given RPC size, the numbers represent averages. The rate limit applies to all flows (they are in the same cgroup). Tests ending with "-edt" ran with the new BPF program supporting EDT. Tests ending with "-hbt" ran on top HBT qdisc with the specified rate (i.e. no HBM). The other tests ran with the HBM BPF program included in the HBM patch-set. EDT has limited value when using DCTCP, but it helps in many cases when using Cubic. It usually achieves larger link utilization and lower 99% latencies for the 1MB RPCs. HBM ends up queueing a lot of packets with its default parameter values, reducing the goodput of the 10KB RPCs and increasing their latency. Also, the RTTs seen by the flows are quite large. Aggr 10K 10K 10K 1MB 1MB 1MB Limit rate drops RTT rate P90 P99 rate P90 P99 Test rate Flows Mbps % us Mbps us us Mbps ms ms -------- ---- ----- ---- ----- --- ---- ---- ---- ---- ---- ---- cubic 1G 2 904 0.02 108 257 511 539 647 13.4 24.5 cubic-edt 1G 2 982 0.01 156 239 656 967 743 14.0 17.2 dctcp 1G 2 977 0.00 105 324 408 744 653 14.5 15.9 dctcp-edt 1G 2 981 0.01 142 321 417 811 660 15.7 17.0 cubic-htb 1G 2 919 0.00 1825 40 2822 4140 879 9.7 9.9 cubic 200M 2 155 0.30 220 81 532 655 74 283 450 cubic-edt 200M 2 188 0.02 222 87 1035 1095 101 84 85 dctcp 200M 2 188 0.03 111 77 912 939 111 76 325 dctcp-edt 200M 2 188 0.03 217 74 1416 1738 114 76 79 cubic-htb 200M 2 188 0.00 5015 8 14ms 15ms 180 48 50 cubic 1G 4 952 0.03 110 165 516 546 262 38 154 cubic-edt 1G 4 973 0.01 190 111 1034 1314 287 65 79 dctcp 1G 4 951 0.00 103 180 617 905 257 37 38 dctcp-edt 1G 4 967 0.00 163 151 732 1126 272 43 55 cubic-htb 1G 4 914 0.00 3249 13 7ms 8ms 300 29 34 cubic 5G 4 4236 0.00 134 305 490 624 1310 10 17 cubic-edt 5G 4 4865 0.00 156 306 425 759 1520 10 16 dctcp 5G 4 4936 0.00 128 485 221 409 1484 7 9 dctcp-edt 5G 4 4924 0.00 148 390 392 623 1508 11 26 v1 -> v2: Incorporated Andrii's suggestions v2 -> v3: Incorporated Yonghong's suggestions v3 -> v4: Removed credit update that is not needed Signed-off-by: Lawrence Brakmo <brakmo@fb.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-02sample/mdev/mbochs: remove set but not used variable 'mdev_state'YueHaibing1-3/+0
Fixes gcc '-Wunused-but-set-variable' warning: samples/vfio-mdev/mbochs.c: In function mbochs_ioctl: samples/vfio-mdev/mbochs.c:1188:21: warning: variable mdev_state set but not used [-Wunused-but-set-variable] It's not used any more since commit 104c7405a64d ("vfio: add edid support to mbochs sample driver") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-07-02vfio-mdev/samples: make some symbols staticKefeng Wang1-23/+24
Make some structs and functions static to fix build warning, parts of warning shown below, samples/vfio-mdev/mtty.c:730:5: warning: symbol 'mtty_create' was not declared. Should it be static? samples/vfio-mdev/mtty.c:780:5: warning: symbol 'mtty_remove' was not declared. Should it be static? samples/vfio-mdev/mtty.c:802:5: warning: symbol 'mtty_reset' was not declared. Should it be static? samples/vfio-mdev/mtty.c:818:9: warning: symbol 'mtty_read' was not declared. Should it be static? samples/vfio-mdev/mtty.c:877:9: warning: symbol 'mtty_write' was not declared. Should it be static? samples/vfio-mdev/mtty.c:1070:5: warning: symbol 'mtty_get_region_info' was not declared. Should it be static? samples/vfio-mdev/mtty.c:1119:5: warning: symbol 'mtty_get_irq_info' was not declared. Should it be static? samples/vfio-mdev/mtty.c:1143:5: warning: symbol 'mtty_get_device_info' was not declared. Should it be static? samples/vfio-mdev/mtty.c:1275:5: warning: symbol 'mtty_open' was not declared. Should it be static? samples/vfio-mdev/mtty.c:1281:6: warning: symbol 'mtty_close' was not declared. Should it be static? samples/vfio-mdev/mtty.c:1305:30: warning: symbol 'mtty_dev_groups' was not declared. Should it be static? Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Kirti Wankhede <kwankhede@nvidia.com> Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> [aw: wrap long lines] Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-07-01samples: pktgen: allow to specify destination portDaniel T. Lee10-2/+95
Currently, kernel pktgen has the feature to specify udp destination port for sending packet. (e.g. pgset "udp_dst_min 9") But on samples, each of the scripts doesn't have any option to achieve this. This commit adds the DST_PORT option to specify the target port(s) in the script. -p : ($DST_PORT) destination PORT range (e.g. 433-444) is also allowed Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-01samples: pktgen: add some helper functions for port parsingDaniel T. Lee1-0/+34
This commit adds port parsing and port validate helper function to parse single or range of port(s) from a given string. (e.g. 1234, 443-444) Helpers will be used in prior to set target port(s) in samples/pktgen. Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+6
The new route handling in ip_mc_finish_output() from 'net' overlapped with the new support for returning congestion notifications from BPF programs. In order to handle this I had to take the dev_loopback_xmit() calls out of the switch statement. The aquantia driver conflicts were simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27xsk: Change the default frame size to 4096 and allow controlling itMaxim Mikityanskiy1-16/+28
The typical XDP memory scheme is one packet per page. Change the AF_XDP frame size in libbpf to 4096, which is the page size on x86, to allow libbpf to be used with the drivers with the packet-per-page scheme. Add a command line option -f to xdpsock to allow to specify a custom frame size. Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-06-26samples: bpf: make the use of xdp samples consistentDaniel T. Lee4-12/+42
Currently, each xdp samples are inconsistent in the use. Most of the samples fetch the interface with it's name. (ex. xdp1, xdp2skb, xdp_redirect_cpu, xdp_sample_pkts, etc.) But some of the xdp samples are fetching the interface with ifindex by command argument. This commit enables xdp samples to fetch interface with it's name without changing the original index interface fetching. (<ifname|ifindex> fetching in the same way as xdp_sample_pkts_user.c does.) Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-06-25samples: bpf: Remove bpf_debug macro in favor of bpf_printkMichal Rostecki1-12/+6
ibumad example was implementing the bpf_debug macro which is exactly the same as the bpf_printk macro available in bpf_helpers.h. This change makes use of bpf_printk instead of bpf_debug. Signed-off-by: Michal Rostecki <mrostecki@opensuse.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-06-24Merge tag 'v5.2-rc6' into sched/core, to refresh the branchIngo Molnar8-20/+9
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-06-24samples/bpf: xdp_redirect, correctly get dummy program idPrashant Bhole1-1/+1
When we terminate xdp_redirect, it ends up with following message: "Program on iface OUT changed, not removing" This results in dummy prog still attached to OUT interface. It is because signal handler checks if the programs are the same that we had attached. But while fetching dummy_prog_id, current code uses prog_fd instead of dummy_prog_fd. This patch passes the correct fd. Fixes: 3b7a8ec2dec3 ("samples/bpf: Check the prog id before exiting") Signed-off-by: Prashant Bhole <prashantbhole.linux@gmail.com> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-06-24samples: make pidfd-metadata fail gracefully on older kernelsDmitry V. Levin1-2/+6
Initialize pidfd to an invalid descriptor, to fail gracefully on those kernels that do not implement CLONE_PIDFD and leave pidfd unchanged. Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Signed-off-by: Christian Brauner <christian@brauner.io>
2019-06-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller6-18/+7
Minor SPDX change conflict. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-21Merge tag 'spdx-5.2-rc6' of ↵Linus Torvalds6-18/+7
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx Pull still more SPDX updates from Greg KH: "Another round of SPDX updates for 5.2-rc6 Here is what I am guessing is going to be the last "big" SPDX update for 5.2. It contains all of the remaining GPLv2 and GPLv2+ updates that were "easy" to determine by pattern matching. The ones after this are going to be a bit more difficult and the people on the spdx list will be discussing them on a case-by-case basis now. Another 5000+ files are fixed up, so our overall totals are: Files checked: 64545 Files with SPDX: 45529 Compared to the 5.1 kernel which was: Files checked: 63848 Files with SPDX: 22576 This is a huge improvement. Also, we deleted another 20000 lines of boilerplate license crud, always nice to see in a diffstat" * tag 'spdx-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (65 commits) treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 507 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 506 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 505 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 504 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 503 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 502 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 501 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 499 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 498 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 497 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 496 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 495 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 491 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 490 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 489 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 488 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 487 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 486 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 485 ...