Age | Commit message (Collapse) | Author | Files | Lines |
|
This reverts commit 77ab21adae509c5540956729e2d03bc1a59bc82a.
Even after 8 years later, GCC LTO has not been upstreamed. Also, it said
"This is a workaround". If this is needed in the future, it should be
added in a proper way.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Jiri Slaby <jirislaby@kernel.org>
|
|
The section name of Rel and Rela starts with ".rel" and ".rela"
respectively (but, I do not know whether this is specification or
convention).
For example, ".rela.text" holds relocation entries applied to the
".text" section.
So, the code chops the ".rel" or ".rela" prefix to get the name of
the section to which the relocation applies.
However, I do not like to skip 4 or 5 bytes blindly because it is
potential memory overrun.
The ELF specification provides a more reliable way to do this.
- The sh_info field holds extra information, whose interpretation
depends on the section type
- If the section type is SHT_REL or SHT_RELA, the sh_info field holds
the section header index of the section to which the relocation
applies.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The section index is always positive, so the argument, secindex, should
be unsigned.
Also, inserted the array range check.
If sym->st_shndx is a special section index (between SHN_LORESERVE and
SHN_HIRESERVE), there is no corresponding section header.
For example, if a symbol specifies an absolute value, sym->st_shndx is
SHN_ABS (=0xfff1).
The current users do not cause the out-of-range access of
info->sechddrs[], but it is better to avoid such a pitfall.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
SPECIAL() is only used in get_secindex(). Squash it.
Make the code more readable with more comments.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Swap the order of 'mkdir' and 'trap' just in case the subshell is
interrupted between 'mkdir' and 'trap' although the effect might be
subtle.
This does not intend to make the cleanup perfect. There are more cases
that miss to remove the tmp directory, for example:
- When interrupted, dash does not invoke the EXIT trap (bash does)
- 'rm' command might be interrupted before removing the directory
I am not addressing all the cases since the tmp directory is harmless
after all.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
|
|
Commit 9ad21c3f3ecf ("kbuild: try harder to find symbol names in
modpost") added Elf_Sword (in a wrong way), but did not use it at all.
BTW, the current code looks weird.
The fix for the 32-bit part would be:
Elf64_Sword --> Elf32_Sword
(inconsistet prefix, Elf32_ vs Elf64_)
The fix for the 64-bit part would be:
Elf64_Sxword --> Elf64_Sword
(the size is different between Sword and Sxword)
Note:
Elf32_Sword == Elf64_Sword == int32_t
Elf32_Sxword == Elf64_Sxword == int64_t
Anyway, let's drop unused code instead of fixing it.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
|
|
There's been an ongoing mission to re-enable the -Wformat warning for
Clang. A previous attempt at enabling the warning showed that there were
many instances of this warning throughout the codebase. The sheer amount
of these warnings really polluted builds and thus -Wno-format was added
to _temporarily_ toggle them off.
After many patches the warning has largely been eradicated for x86,
x86_64, arm, and arm64 on a variety of configs. The time to enable the
warning has never been better as it seems for the first time we are
ahead of them and can now solve them as they appear rather than tackling
from a backlog.
As to the root cause of this large backlog of warnings, Clang seems to
pickup on some more nuanced cases of format warnings caused by implicit
integer conversion as well as default argument promotions from
printf-like functions.
Link: https://github.com/ClangBuiltLinux/linux/issues/378
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Along with saying "Please install Qt5 ...", tell exactly which
parts of Qt5 are needed. This is useful when parts of Qt5 are
installed but some of the required pieces are missing, and it
eliminates the need for the user to find the shell script and
the line in it that provide that information.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Use sym_get_data() to replace the long code.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
|
|
Since commit 269a535ca931 ("modpost: generate vmlinux.symvers and
reuse it for the second modpost"), modpost only parses relocatable
files (ET_REL).
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
|
|
scripts/checkstack.pl lacks support for the riscv architecture. Add
support to detect "addi sp,sp,-FRAME_SIZE" stack frame generation instruction
Signed-off-by: Wadim Mueller <wafgo01@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The cc-option macro creates the temporary directory, .tmp_$$$$.
Shell expands '$$' into its process ID. '$$$$' results in repeated PID.
In Makefile, '$$$$' is correct (see TMPOUT in scripts/Malefile.compiler)
because '$$' is an escape sequence of '$'. Make expands '$$$$' into '$$',
then shell expands it into the process ID.
This does not apply to Kconfig because Kconfig requires variable
references to be enclosed by curly braces, like ${variable}.
The '$' that is not followed by '{' loses its effect.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Nicolas Schier <nicolas@fjasle.eu>
|
|
Remove two dated config leak ignore entries from scripts/headers_install.sh:
arch/alpha/include/uapi/asm/setup.h does no more leak any CONFIG_* symbol to
user-space any more since commit 3cb8b1537f8a ("alpha: Move setup.h out of
uapi").
Same holds for include/uapi/asm-generic/fcntl.h since commit 306f7cc1e906
("uapi: always define F_GETLK64/F_SETLK64/F_SETLKW64 in fcntl.h").
Signed-off-by: Nicolas Schier <nicolas@fjasle.eu>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
If the directory path given to INSTALL_MOD_PATH contains % or :,
the module_install fails.
% is used in pattern rules, and : as the separator of dependencies.
Bail out with a clearer error message.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
|
|
Presumably, _target_os is defined even if the --target flag does not
specify it, but it is better to make it explicit.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Cross-building (bin)rpm-pkg fails on several architectures.
For example, 'make ARCH=arm binrpm-pkg' fails like follows:
sh ./scripts/package/mkspec prebuilt > ./binkernel.spec
rpmbuild --define "_builddir ." --target \
arm -bb ./binkernel.spec
Building target platforms: arm
Building for target arm
warning: line 19: It's not recommended to have unversioned Obsoletes: Obsoletes: kernel-headers
Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.0S8t2F
+ umask 022
+ cd .
+ mkdir -p /home/masahiro/rpmbuild/BUILDROOT/kernel-5.19.0_rc6-19.%{_arch}/boot
+ make -f ./Makefile image_name
+ cp arch/arm/boot/zImage /home/masahiro/rpmbuild/BUILDROOT/kernel-5.19.0_rc6-19.%{_arch}/boot/vmlinuz-5.19.0-rc6
+ make -f ./Makefile INSTALL_MOD_PATH=/home/masahiro/rpmbuild/BUILDROOT/kernel-5.19.0_rc6-19.%{_arch} modules_install
make[3]: *** No rule to make target '/home/masahiro/rpmbuild/BUILDROOT/kernel-5.19.0_rc6-19.arch/arm/crypto/aes-arm-bs.ko{_arch}/lib/modules/5.19.0-rc6/kernel/%', needed by '__modinst'. Stop.
make[2]: *** [Makefile:1768: modules_install] Error 2
error: Bad exit status from /var/tmp/rpm-tmp.0S8t2F (%install)
By default, 'buildroot' contains %{_arch} (see /usr/lib/rpm/macros).
_arch is generally defined in /usr/lib/rpm/platforms/*/macros, where
the platform sub-directory is specified by --target= option for cross
builds.
If the given arch does not exist, %{_arch} is not expanded.
In the example above, --target=arm is passed to rpmbuild, but
/usr/lib/rpm/platforms/arm-linux/ does not exist.
The '%' character in the path confuses GNU make and rpmbuild.
The same occurs for such architectures as csky, microblaze, nios2, etc.
Define _arch if it has not been defined.
Reported-by: Jason Self <jason@bluehome.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
When passed -print-file-name=plugin, the dummy gcc script creates a
temporary directory that is never cleaned up. To avoid cluttering
$TMPDIR, instead use a static directory included in the source tree.
Fixes: 76426e238834 ("kbuild: add dummy toolchains to enable all cc-option etc. in Kconfig")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
This reverts commit 4d10c223baab8be8f717df3625cfece5be26dead.
Commit 37744feebc08 ("sh: remove sh5 support") removed the sh64 support
entirely.
Note:
.cranges was only used for sh64 ever.
Commit 211dc24b8744 ("Remove sh5 and sh64 support") in binutils-gdb
already removed the relevant code.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
|
|
Replace a pipeline of echo and sed with printf to decrease process forks.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
|
|
This script is only used in certs/Makefile, so certs/ is a better
home for it.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Mickaël Salaün <mic@linux.microsoft.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Commit 65ce9c38326e ("kbuild: move module strip/compression code into
scripts/Makefile.modinst") added this unused code.
Perhaps, I thought cmd_none was useful for CONFIG_MODULE_COMPRESS_NONE,
but I did not use it after all.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
|
|
scripts/clang-tools/gen_compile_commands.py incorrectly assumes that
each .mod file only contains one line. That assumption was correct when
the script was originally created, but commit 9413e7640564 ("kbuild:
split the second line of *.mod into *.usyms") changed the .mod file
format so that there is one entry per line, and potentially many lines.
The problem can be reproduced by using Kbuild to generate
compile_commands.json, like this:
make CC=clang compile_commands.json
In many cases, the problem might be overlooked because many subsystems
only have one line anyway. However, in some subsystems (Nouveau, with
762 entries, is a notable example) it results in skipping most of the
subsystem.
Fix this by fully processing each .mod file.
Fixes: 9413e7640564 ("kbuild: split the second line of *.mod into *.usyms")
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Module object files can contain an undefined reference to __this_module,
which isn't resolved until we link the final .ko. The kernel doesn't
export this symbol, so ignore it in gen_autoksyms.sh.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Steve Muckle <smuckle@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Ramji Jiyani <ramjiyani@google.com>
|
|
Since commit f02e8a6596b7 ("module: Sort exported symbols"),
EXPORT_SYMBOL* is placed in the individual section ___ksymtab(_gpl)+<sym>
(3 leading underscores instead of 2).
Since then, modpost cannot detect the bad combination of EXPORT_SYMBOL
and __init/__exit.
Fix the .fromsec field.
Fixes: f02e8a6596b7 ("module: Sort exported symbols")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull build tooling updates from Thomas Gleixner:
- Remove obsolete CONFIG_X86_SMAP reference from objtool
- Fix overlapping text section failures in faddr2line for real
- Remove OBJECT_FILES_NON_STANDARD usage from x86 ftrace and replace it
with finegrained annotations so objtool can validate that code
correctly.
* tag 'objtool-urgent-2022-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ftrace: Remove OBJECT_FILES_NON_STANDARD usage
faddr2line: Fix overlapping text section failures, the sequel
objtool: Fix obsolete reference to CONFIG_X86_SMAP
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Make the *.mod build rule portable for POSIX awk
- Fix regression of 'make nsdeps'
- Make scripts/check-local-export working for older bash versions
- Fix scripts/gdb to extract the .config data from vmlinux
* tag 'kbuild-fixes-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
scripts/gdb: change kernel config dumping method
scripts/check-local-export: avoid 'wait $!' for process substitution
scripts/nsdeps: adjust to the format change of *.mod files
kbuild: avoid regex RS for POSIX awk
|
|
MAGIC_START("IKCFG_ST") and MAGIC_END("IKCFG_ED") are moved out
from the kernel_config_data variable.
Thus, we parse kernel_config_data directly instead of considering
offset of MAGIC_START and MAGIC_END.
Fixes: 13610aa908dc ("kernel/configs: use .incbin directive to embed config_data.gz")
Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Bash 4.4, released in 2016, supports 'wait $!' to check the exit status
of a process substitution, but it seems too new.
Some people using older bash versions (on CentOS 7, Ubuntu 16.04, etc.)
reported an error like this:
./scripts/check-local-export: line 54: wait: pid 17328 is not a child of this shell
I used the process substitution to avoid a pipeline, which executes each
command in a subshell. If the while-loop is executed in the subshell
context, variable changes within are lost after the subshell terminates.
Fortunately, Bash 4.2, released in 2011, supports the 'lastpipe' option,
which makes the last element of a pipeline run in the current shell process.
Switch to the pipeline with 'lastpipe' solution, and also set 'pipefail'
to catch errors from ${NM}.
Add the bash requirement to Documentation/process/changes.rst.
Fixes: 31cb50b5590f ("kbuild: check static EXPORT_SYMBOL* by script instead of modpost")
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Reported-by: Wang Yugui <wangyugui@e16-tech.com>
Tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14 (x86-64)
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
OpenSSL 3.0 deprecated the OpenSSL's ENGINE API. That is as may be, but
the kernel build host tools still use it. Disable the warning about
deprecated declarations until somebody who cares fixes it.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 22f26f21774f ("kbuild: get rid of duplication in *.mod files")
changed the format of *.mod files to put one object per line, but missed
to adjust scripts/nsdeps.
Fixes: 22f26f21774f ("kbuild: get rid of duplication in *.mod files")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
In 22f26f21774f8 awk was added to deduplicate *.mod files. The awk
invocation passes -v RS='( |\n)' to match a space or newline character
as the record separator. Unfortunately, POSIX states[1]
> If RS contains more than one character, the results are unspecified.
Some implementations (such as the One True Awk[2] used by the BSDs) do
not treat RS as a regular expression. When awk does not support regex
RS, build failures such as the following are produced (first error using
allmodconfig):
CC [M] arch/x86/events/intel/uncore.o
CC [M] arch/x86/events/intel/uncore_nhmex.o
CC [M] arch/x86/events/intel/uncore_snb.o
CC [M] arch/x86/events/intel/uncore_snbep.o
CC [M] arch/x86/events/intel/uncore_discovery.o
LD [M] arch/x86/events/intel/intel-uncore.o
ld: cannot find uncore_nhmex.o: No such file or directory
ld: cannot find uncore_snb.o: No such file or directory
ld: cannot find uncore_snbep.o: No such file or directory
ld: cannot find uncore_discovery.o: No such file or directory
make[3]: *** [scripts/Makefile.build:422: arch/x86/events/intel/intel-uncore.o] Error 1
make[2]: *** [scripts/Makefile.build:487: arch/x86/events/intel] Error 2
make[1]: *** [scripts/Makefile.build:487: arch/x86/events] Error 2
make: *** [Makefile:1839: arch/x86] Error 2
To avoid this, use printf(1) to produce a newline between each object
path, instead of the space produced by echo(1), so that the default RS
can be used by awk.
[1]: https://pubs.opengroup.org/onlinepubs/9699919799/utilities/awk.html
[2]: https://github.com/onetrueawk/awk
Fixes: 22f26f21774f ("kbuild: get rid of duplication in *.mod files")
Signed-off-by: Kevin Locke <kevin@kevinlocke.name>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
If a function lives in a section other than .text, but .text also exists
in the object, faddr2line may wrongly assume .text. This can result in
comically wrong output. For example:
$ scripts/faddr2line vmlinux.o enter_from_user_mode+0x1c
enter_from_user_mode+0x1c/0x30:
find_next_bit at /home/jpoimboe/git/linux/./include/linux/find.h:40
(inlined by) perf_clear_dirty_counters at /home/jpoimboe/git/linux/arch/x86/events/core.c:2504
Fix it by passing the section name to addr2line, unless the object file
is vmlinux, in which case the symbol table uses absolute addresses.
Fixes: 1d1a0e7c5100 ("scripts/faddr2line: Fix overlapping text section failures")
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/7d25bc1408bd3a750ac26e60d2f2815a5f4a8363.1654130536.git.jpoimboe@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Thomas Gleixner:
- Handle __ubsan_handle_builtin_unreachable() correctly and treat it as
noreturn
- Allow architectures to select uaccess validation
- Use the non-instrumented bit test for test_cpu_has() to prevent
escape from non-instrumentable regions
- Use arch_ prefixed atomics for JUMP_LABEL=n builds to prevent escape
from non-instrumentable regions
- Mark a few tiny inline as __always_inline to prevent GCC from
bringing them out of line and instrumenting them
- Mark the empty stub context_tracking_enabled() as always inline as
GCC brings them out of line and instruments the empty shell
- Annotate ex_handler_msr_mce() as dead end
* tag 'objtool-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/extable: Annotate ex_handler_msr_mce() as a dead end
context_tracking: Always inline empty stubs
x86: Always inline on_thread_stack() and current_top_of_stack()
jump_label,noinstr: Avoid instrumentation for JUMP_LABEL=n builds
x86/cpu: Elide KCSAN for cpu_has() and friends
objtool: Mark __ubsan_handle_builtin_unreachable() as noreturn
objtool: Add CONFIG_HAVE_UACCESS_VALIDATION
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- Fix build regressions for parisc, csky, nios2, openrisc
- Simplify module builds for CONFIG_LTO_CLANG and CONFIG_X86_KERNEL_IBT
- Remove arch/parisc/nm, which was presumably a workaround for old
tools
- Check the odd combination of EXPORT_SYMBOL and 'static' precisely
- Make external module builds robust against "too long argument error"
- Support j, k keys for moving the cursor in nconfig
* tag 'kbuild-v5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits)
kbuild: Allow to select bash in a modified environment
scripts: kconfig: nconf: make nconfig accept jk keybindings
modpost: use fnmatch() to simplify match()
modpost: simplify mod->name allocation
kbuild: factor out the common objtool arguments
kbuild: move vmlinux.o link to scripts/Makefile.vmlinux_o
kbuild: clean .tmp_* pattern by make clean
kbuild: remove redundant cleanups in scripts/link-vmlinux.sh
kbuild: rebuild multi-object modules when objtool is updated
kbuild: add cmd_and_savecmd macro
kbuild: make *.mod rule robust against too long argument error
kbuild: make built-in.a rule robust against too long argument error
kbuild: check static EXPORT_SYMBOL* by script instead of modpost
parisc: remove arch/parisc/nm
kbuild: do not create *.prelink.o for Clang LTO or IBT
kbuild: replace $(linked-object) with CONFIG options
kbuild: do not try to parse *.cmd files for objects provided by compiler
kbuild: replace $(if A,A,B) with $(or A,B) in scripts/Makefile.modpost
modpost: squash if...else-if in find_elf_symbol2()
modpost: reuse ARRAY_SIZE() macro for section_mismatch()
...
|
|
This fixes the build error when the system has a default bash version
which is too old to support associative array variables.
The build error log as fellowing:
linux/scripts/check-local-export: line 11: declare: -A: invalid option
declare: usage: declare [-afFirtx] [-p] [name[=value] ...]
Signed-off-by: Schspa Shi <schspa@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Make nconfig accept jk keybindings for movement in addition to arrow
keys.
Signed-off-by: Isak Ellmer <isak01@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Replace the own implementation for wildcard (glob) matching with
a function call to fnmatch().
Also, change the return type to 'bool'.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
mod->name is set to the ELF filename with the suffix ".o" stripped.
The current code calls strdup() and free() to manipulate the string,
but a simpler approach is to pass new_module() with the name length
subtracted by 2.
Also, check if the passed filename ends with ".o" before stripping it.
The current code blindly chops the suffix:
tmp[strlen(tmp) - 2] = '\0'
It will cause buffer under-run if strlen(tmp) < 2;
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
|
|
scripts/Makefile.build and scripts/link-vmlinux.sh have similar setups
for the objtool arguments.
It was difficult to factor out them because all the vmlinux build rules
were written in a shell script. It is somewhat tedious to touch the two
files every time a new objtool option is supported.
To reduce the code duplication, move the objtool for vmlinux.o into
scripts/Makefile.vmlinux_o. Then, move the common macros to Makefile.lib
so they are shared between Makefile.build and Makefile.vmlinux_o.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14 (x86-64)
|
|
This is a preparation for moving the objtool rule in the next commit.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14 (x86-64)
|
|
Change the "make clean" rule to remove all the .tmp_* files.
.tmp_objdiff is the only exception, which should be removed by
"make mrproper".
Rename the record directory of objdiff, .tmp_objdiff to .objdiff to
avoid the removal by "make clean".
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14 (x86-64)
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull initial Loongarch architecture code from Arnd Bergmann:
"This is the majority of the loongarch architecture code, including the
final system call interface and all core functionality.
It still misses three sets of peripheral but vital patches to add
support for other subsystems, which have yet to pass review:
- The drivers/firmware/efi stub for booting from a standard UEFI
firmware implementation. Both the original custom boot interface
and a draft implementation of the EFI stub did not make it, so it
is currently impossible to boot the kernel, until the loongarch
specific portions get accepted into the UEFI subsystem
- The drivers/irqchip/irq-loongson-*.c drivers are shared with the
the MIPS port, but currently lack support for ACPI based booting,
which will get merged through the irqchip subsystem.
- Similarly, the drivers/pci/controller/pci-loongson.c needs to be
modified for ACPI support, which will be merged through the PCI
subsystem.
While the port cannot actually be used before all the above are
merged, having it in 5.19 helps to establish the user space ABI for
the libc ports to build on, and to help any treewide changes in the
mainline kernel get applied here as well.
A gcc-12 based tool chains for build testing is now included in
https://mirrors.edge.kernel.org/pub/tools/crosstool/"
Original description from Huacai Chen:
"LoongArch is a new RISC ISA, which is a bit like MIPS or RISC-V.
LoongArch includes a reduced 32-bit version (LA32R), a standard 32-bit
version (LA32S) and a 64-bit version (LA64). LoongArch use ACPI as its
boot protocol LoongArch-specific interrupt controllers (similar to APIC)
are already added in the next revision of ACPI Specification (current
revision is 6.4).
This patchset is adding basic LoongArch support in mainline kernel, we
can see a complete snapshot here:
https://github.com/loongson/linux/tree/loongarch-next
https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson.git/log/?h=loongarch-next
Cross-compile tool chain to build kernel:
https://github.com/loongson/build-tools/releases/download/2021.12.21/loongarch64-clfs-2022-03-03-cross-tools-gcc-glibc.tar.xz
A CLFS-based Linux distro:
https://github.com/loongson/build-tools/releases/download/2021.12.21/loongarch64-clfs-system-2022-03-03.tar.bz2
Open-source tool chain which is under review (Binutils and Gcc are already upstream):
https://github.com/loongson/binutils-gdb/tree/upstream_v3.1
https://github.com/loongson/gcc/tree/loongarch_upstream_v6.3
https://github.com/loongson/glibc/tree/loongarch_2_35_dev_v2.2
Loongson and LoongArch documentations:
https://github.com/loongson/LoongArch-Documentation
LoongArch-specific interrupt controllers:
https://mantis.uefi.org/mantis/view.php?id=2203
https://mantis.uefi.org/mantis/view.php?id=2313"
Link: https://lore.kernel.org/lkml/20220603072053.35005-1-chenhuacai@loongson.cn/
* tag 'loongarch-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (24 commits)
MAINTAINERS: Add maintainer information for LoongArch
LoongArch: Add Loongson-3 default config file
LoongArch: Add Non-Uniform Memory Access (NUMA) support
LoongArch: Add multi-processor (SMP) support
LoongArch: Add VDSO and VSYSCALL support
LoongArch: Add some library functions
LoongArch: Add misc common routines
LoongArch: Add ELF and module support
LoongArch: Add signal handling support
LoongArch: Add system call support
LoongArch: Add memory management
LoongArch: Add process management
LoongArch: Add exception/interrupt handling
LoongArch: Add boot and setup routines
LoongArch: Add other common headers
LoongArch: Add atomic/locking headers
LoongArch: Add CPU definition headers
LoongArch: Add build infrastructure
LoongArch: Add writecombine support for drm
LoongArch: Add ELF-related definitions
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of driver core changes for 5.19-rc1.
Lots of tiny driver core changes and cleanups happened this cycle, but
the two major things are:
- firmware_loader reorganization and additions including the ability
to have XZ compressed firmware images and the ability for userspace
to initiate the firmware load when it needs to, instead of being
always initiated by the kernel. FPGA devices specifically want this
ability to have their firmware changed over the lifetime of the
system boot, and this allows them to work without having to come up
with yet-another-custom-uapi interface for loading firmware for
them.
- physical location support added to sysfs so that devices that know
this information, can tell userspace where they are located in a
common way. Some ACPI devices already support this today, and more
bus types should support this in the future.
Smaller changes include:
- driver_override api cleanups and fixes
- error path cleanups and fixes
- get_abi script fixes
- deferred probe timeout changes.
It's that last change that I'm the most worried about. It has been
reported to cause boot problems for a number of systems, and I have a
tested patch series that resolves this issue. But I didn't get it
merged into my tree before 5.18-final came out, so it has not gotten
any linux-next testing.
I'll send the fixup patches (there are 2) as a follow-on series to this
pull request.
All have been tested in linux-next for weeks, with no reported issues
other than the above-mentioned boot time-outs"
* tag 'driver-core-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
driver core: fix deadlock in __device_attach
kernfs: Separate kernfs_pr_cont_buf and rename_lock.
topology: Remove unused cpu_cluster_mask()
driver core: Extend deferred probe timeout on driver registration
MAINTAINERS: add Russ Weight as a firmware loader maintainer
driver: base: fix UAF when driver_attach failed
test_firmware: fix end of loop test in upload_read_show()
driver core: location: Add "back" as a possible output for panel
driver core: location: Free struct acpi_pld_info *pld
driver core: Add "*" wildcard support to driver_async_probe cmdline param
driver core: location: Check for allocations failure
arch_topology: Trace the update thermal pressure
kernfs: Rename kernfs_put_open_node to kernfs_unlink_open_file.
export: fix string handling of namespace in EXPORT_SYMBOL_NS
rpmsg: use local 'dev' variable
rpmsg: Fix calling device_lock() on non-initialized device
firmware_loader: describe 'module' parameter of firmware_upload_register()
firmware_loader: Move definitions from sysfs_upload.h to sysfs.h
firmware_loader: Fix configs for sysfs split
selftests: firmware: Add firmware upload selftests
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / other smaller driver subsystem updates from Greg KH:
"Here is the large set of char, misc, and other driver subsystem
updates for 5.19-rc1. The merge request for this has been delayed as I
wanted to get lots of linux-next testing due to some late arrivals of
changes for the habannalabs driver.
Highlights of this merge are:
- habanalabs driver updates for new hardware types and fixes and
other updates
- IIO driver tree merge which includes loads of new IIO drivers and
cleanups and additions
- PHY driver tree merge with new drivers and small updates to
existing ones
- interconnect driver tree merge with fixes and updates
- soundwire driver tree merge with some small fixes
- coresight driver tree merge with small fixes and updates
- mhi bus driver tree merge with lots of updates and new device
support
- firmware driver updates
- fpga driver updates
- lkdtm driver updates (with a merge conflict, more on that below)
- extcon driver tree merge with small updates
- lots of other tiny driver updates and fixes and cleanups, full
details in the shortlog.
All of these have been in linux-next for almost 2 weeks with no
reported problems"
* tag 'char-misc-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (387 commits)
habanalabs: use separate structure info for each error collect data
habanalabs: fix missing handle shift during mmap
habanalabs: remove hdev from hl_ctx_get args
habanalabs: do MMU prefetch as deferred work
habanalabs: order memory manager messages
habanalabs: return -EFAULT on copy_to_user error
habanalabs: use NULL for eventfd
habanalabs: update firmware header
habanalabs: add support for notification via eventfd
habanalabs: add topic to memory manager buffer
habanalabs: handle race in driver fini
habanalabs: add device memory scrub ability through debugfs
habanalabs: use unified memory manager for CB flow
habanalabs: unified memory manager new code for CB flow
habanalabs/gaudi: set arbitration timeout to a high value
habanalabs: add put by handle method to memory manager
habanalabs: hide memory manager page shift
habanalabs: Add separate poll interval value for protocol
habanalabs: use get_task_pid() to take PID
habanalabs: add prefetch flag to the MAP operation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX updates from Greg KH:
"Here are some SPDX license marker changes.
The SPDX-labeling effort has started to pick up again, so here are
some changes for various parts of the tree that are related to this
effort.
Included in here are:
- freevxfs license updates
- spihash.c license cleanups
- spdxcheck script updates to make things easier to work with going
forward
All of the license updates came from the original authors/copyright
holders of the code involved.
All of these have been in linux-next for weeks with no reported
issues"
* tag 'spdx-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
siphash: add SPDX tags as sole licensing authority
scripts/spdxcheck: Exclude top-level README
scripts/spdxcheck: Exclude MAINTAINERS/CREDITS
scripts/spdxcheck: Exclude config directories
scripts/spdxcheck: Put excluded files and directories into a separate file
scripts/spdxcheck: Add option to display files without SPDX
scripts/spdxcheck: Add [sub]directory statistics
scripts/spdxcheck: Add directory statistics
scripts/spdxcheck: Add percentage to statistics
freevxfs: relicense to GPLv2 only
|
|
Add Kbuild, Makefile, Kconfig and link script for LoongArch build
infrastructure.
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add ELF-related definitions for LoongArch, including: EM_LOONGARCH,
KEXEC_ARCH_LOONGARCH, AUDIT_ARCH_LOONGARCH32, AUDIT_ARCH_LOONGARCH64
and NT_LOONGARCH_*.
Reviewed-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Pull documentation fixes from Jonathan Corbet:
"A handful of late-arriving documentation fixes and the addition of an
SVG tux logo which, I'm assured, we're going to want"
* tag 'docs-5.19-2' of git://git.lwn.net/linux:
documentation: Format button_dev as a pointer.
docs: add SVG version of the Linux logo
docs: move Linux logo into a new `images` folder
docs: blockdev: change title to match section content
docs/conf.py: Cope with removal of language=None in Sphinx 5.0.0
|
|
Having assets in the top-level `Documentation` directory can make
it harder to find the documents one needs, especially if we want
to add more of them later on.
Instead, create a new `images` folder inside it that is used
to hold assets such as logos.
In addition, update the reference in `scripts/spdxcheck-test.sh`.
Link: https://lore.kernel.org/lkml/8735hicoy7.fsf@meer.lwn.net/
Suggested-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://lore.kernel.org/r/20220528153132.8636-1-ojeda@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
These are cleaned by the top Makefile.
vmlinux.o and .vmlinux.d matches the '*.[aios]' and '.*.d' patterns
respectively.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14 (x86-64)
|