summaryrefslogtreecommitdiff
path: root/sound/core/seq
AgeCommit message (Collapse)AuthorFilesLines
2022-11-19ALSA: seq: Fix function prototype mismatch in snd_seq_expand_var_eventKees Cook1-4/+7
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG), indirect call targets are validated against the expected function pointer prototype to make sure the call target is valid to help mitigate ROP attacks. If they are not identical, there is a failure at run time, which manifests as either a kernel panic or thread getting killed. seq_copy_in_user() and seq_copy_in_kernel() did not have prototypes matching snd_seq_dump_func_t. Adjust this and remove the casts. There are not resulting binary output differences. This was found as a result of Clang's new -Wcast-function-type-strict flag, which is more sensitive than the simpler -Wcast-function-type, which only checks for type width mismatches. Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/lkml/202211041527.HD8TLSE1-lkp@intel.com Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org> Cc: alsa-devel@alsa-project.org Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20221118232346.never.380-kees@kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-08-24ALSA: seq: Fix data-race at module auto-loadingTakashi Iwai1-7/+5
It's been reported that there is a possible data-race accessing to the global card_requested[] array at ALSA sequencer core, which is used for determining whether to call request_module() for the card or not. This data race itself is almost harmless, as it might end up with one extra request_module() call for the already loaded module at most. But it's still better to fix. This patch addresses the possible data race of card_requested[] and client_requested[] arrays by replacing them with bitmask. It's an atomic operation and can work without locks. Reported-by: Abhishek Shah <abhishek.shah@columbia.edu> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/CAEHB24_ay6YzARpA1zgCsE7=H9CSJJzux618E=Ka4h0YdKn=qA@mail.gmail.com Link: https://lore.kernel.org/r/20220823072717.1706-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-08-23ALSA: seq: oss: Fix data-race for max_midi_devs accessTakashi Iwai1-0/+2
ALSA OSS sequencer refers to a global variable max_midi_devs at creating a new port, storing it to its own field. Meanwhile this variable may be changed by other sequencer events at snd_seq_oss_midi_check_exit_port() in parallel, which may cause a data race. OTOH, this data race itself is almost harmless, as the access to the MIDI device is done via get_mdev() and it's protected with a refcount, hence its presence is guaranteed. Though, it's sill better to address the data-race from the code sanity POV, and this patch adds the proper spinlock for the protection. Reported-by: Abhishek Shah <abhishek.shah@columbia.edu> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/CAEHB2493pZRXs863w58QWnUTtv3HHfg85aYhLn5HJHCwxqtHQg@mail.gmail.com Link: https://lore.kernel.org/r/20220823072717.1706-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-05-17ALSA: seq: replace ternary operator with max()Guo Zhengkui1-1/+1
Fix the following coccicheck warning: sound/core/seq/seq_ports.c:142:12-14: WARNING opportunity for max() Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com> Link: https://lore.kernel.org/r/20220517062518.123292-1-guozhengkui@vivo.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-03-14ALSA: seq: oss: fix typoJulia Lawall1-1/+1
Fix typo in "announcement". Reported-by: Joe Perches <joe@perches.com> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/20220313085635.102123-1-Julia.Lawall@inria.fr Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-03-13ALSA: seq: oss: use kzallocJulia Lawall1-2/+1
Use kzalloc instead of kmalloc + memset. The semantic patch that makes this change is: (https://coccinelle.gitlabpages.inria.fr/website/) //<smpl> @@ expression res, size, flag; @@ - res = kmalloc(size, flag); + res = kzalloc(size, flag); ... - memset(res, 0, size); //</smpl> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/20220312102705.71413-4-Julia.Lawall@inria.fr Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-01-06ALSA: seq: virmidi: Add a drain operationStefan Sauer1-0/+11
If a driver does not supply a drain operation for outputs, a default code path will execute msleep(50). Especially for a virtual midi device this severely limmits the throughput. This implementation for the virtual midi driver simply flushes the output workqueue. Signed-off-by: Stefan Sauer <st_kost@gmx.de> Link: https://lore.kernel.org/r/20220106124145.17254-1-st_kost@gmx.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-12-07ALSA: seq: Set upper limit of processed eventsTakashi Iwai1-2/+12
Currently ALSA sequencer core tries to process the queued events as much as possible when they become dispatchable. If applications try to queue too massive events to be processed at the very same timing, the sequencer core would still try to process such all events, either in the interrupt context or via some notifier; in either away, it might be a cause of RCU stall or such problems. As a potential workaround for those problems, this patch adds the upper limit of the amount of events to be processed. The remaining events are processed in the next batch, so they won't be lost. For the time being, it's limited up to 1000 events per queue, which should be high enough for any normal usages. Reported-by: Zqiang <qiang.zhang1211@gmail.com> Reported-by: syzbot+bb950e68b400ab4f65f8@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20211102033222.3849-1-qiang.zhang1211@gmail.com Link: https://lore.kernel.org/r/20211207165146.2888-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-09Merge branch 'for-linus' into for-nextTakashi Iwai1-12/+27
2021-08-03ALSA: seq: Fix racy deletion of subscriberTakashi Iwai1-12/+27
It turned out that the current implementation of the port subscription is racy. The subscription contains two linked lists, and we have to add to or delete from both lists. Since both connection and disconnection procedures perform the same order for those two lists (i.e. src list, then dest list), when a deletion happens during a connection procedure, the src list may be deleted before the dest list addition completes, and this may lead to a use-after-free or an Oops, even though the access to both lists are protected via mutex. The simple workaround for this race is to change the access order for the disconnection, namely, dest list, then src list. This assures that the connection has been established when disconnecting, and also the concurrent deletion can be avoided. Reported-and-tested-by: folkert <folkert@vanheusden.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210801182754.GP890690@belle.intranet.vanheusden.com Link: https://lore.kernel.org/r/20210803114312.2536-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-07-27ALSA: seq: Fix comments of wrong client number for MIDI PassthroughTakashi Iwai1-4/+4
MIDI Passthrough sequencer client is assigned always to the fixed number 14, while it's wrongly documented in the comments as if 62, which was an old number that was used during development. Fix all those numbers. Link: https://lore.kernel.org/r/20210727105232.7321-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-07-01Merge branch 'for-next' into for-linusTakashi Iwai13-73/+131
2021-06-17ALSA: seq: oss: Fix error check at system port creationTakashi Iwai1-3/+2
The system port creation in ALSA OSS sequencer was wrongly checked against to the port number that can be never negative. The error code should be checked rather against the ioctl call. This patch corrects the error check. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20210617134742.6321-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-10ALSA: seq: Fix race of snd_seq_timer_open()Takashi Iwai1-1/+9
The timer instance per queue is exclusive, and snd_seq_timer_open() should have managed the concurrent accesses. It looks as if it's checking the already existing timer instance at the beginning, but it's not right, because there is no protection, hence any later concurrent call of snd_seq_timer_open() may override the timer instance easily. This may result in UAF, as the leftover timer instance can keep running while the queue itself gets closed, as spotted by syzkaller recently. For avoiding the race, add a proper check at the assignment of tmr->timeri again, and return -EBUSY if it's been already registered. Reported-by: syzbot+ddc1260a83ed1cbf6fb5@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/000000000000dce34f05c42f110c@google.com Link: https://lore.kernel.org/r/20210610152059.24633-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-09ALSA: seq: Fix assignment in if conditionTakashi Iwai13-72/+131
There are lots of places doing assignments in if condition in ALSA sequencer core, which is a bad coding style that may confuse readers and occasionally lead to bugs. This patch is merely for coding-style fixes, no functional changes. Link: https://lore.kernel.org/r/20210608140540.17885-57-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-18Merge branch 'for-linus' into for-nextTakashi Iwai1-1/+2
Back-merge of 5.11 devel branch for more works on USB-audio. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-15ALSA: seq: oss: Fix missing error check in snd_seq_oss_synth_make_info()Takashi Iwai1-1/+2
snd_seq_oss_synth_make_info() didn't check the error code from snd_seq_oss_midi_make_info(), and this leads to the call of strlcpy() with the uninitialized string as the source, which may lead to the access over the limit. Add the proper error check for avoiding the failure. Reported-by: syzbot+e42504ff21cff05a595f@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210115093428.15882-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-08ALSA: Convert strlcpy to strscpy when return value is unusedJoe Perches4-9/+9
strlcpy is deprecated. see: Documentation/process/deprecated.rst Change the calls that do not use the strlcpy return value to the preferred strscpy. Done with cocci script: @@ expression e1, e2, e3; @@ - strlcpy( + strscpy( e1, e2, e3); This cocci script leaves the instances where the return value is used unchanged. After this patch, sound/ has 3 uses of strlcpy() that need to be manually inspected for conversion and changed one day. $ git grep -w strlcpy sound/ sound/usb/card.c: len = strlcpy(card->longname, s, sizeof(card->longname)); sound/usb/mixer.c: return strlcpy(buf, p->name, buflen); sound/usb/mixer.c: return strlcpy(buf, p->names[index], buflen); Miscellenea: o Remove trailing whitespace in conversion of sound/core/hwdep.c Link: https://lore.kernel.org/lkml/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/22b393d1790bb268769d0bab7bacf0866dcb0c14.camel@perches.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-12-25ALSA: core: Use DIV_ROUND_UP() instead of open-coding itLars-Peter Clausen1-1/+1
Use DIV_ROUND_UP() instead of open-coding it. This documents intent and makes it more clear what is going on for the casual reviewer. Generated using the following the Coccinelle semantic patch. // <smpl> @@ expression x, y; @@ -(((x) + (y) - 1) / (y)) +DIV_ROUND_UP(x, y) // </smpl> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20201223172229.781-1-lars@metafoo.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-12-06ALSA: seq: Use bool for snd_seq_queue internal flagsTakashi Iwai1-4/+4
The snd_seq_queue struct contains various flags in the bit fields. Those are categorized to two different use cases, both of which are protected by different spinlocks. That implies that there are still potential risks of the bad operations for bit fields by concurrent accesses. For addressing the problem, this patch rearranges those flags to be a standard bool instead of a bit field. Reported-by: syzbot+63cbe31877bb80ef58f5@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20201206083456.21110-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-04ALSA: seq: remove useless functionYu Hao3-31/+0
The function snd_seq_queue_client_termination() is only called from the function seq_free_client1(). The function seq_free_client1() calls the function snd_seq_queue_client_leave() and the function snd_seq_queue_client_termination() together. Because the function snd_seq_queue_client_leave() does all things, so the function snd_seq_queue_client_termination() is a useless function. Signed-off-by: Yu Hao <yuhaobehappy@gmail.com> Link: https://lore.kernel.org/r/20201103223335.21831-1-yuhaobehappy@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-09-23ALSA: seq: oss: Avoid mutex lock for a long-time ioctlTakashi Iwai1-2/+5
Recently we applied a fix to cover the whole OSS sequencer ioctls with the mutex for dealing with the possible races. This works fine in general, but in theory, this may lead to unexpectedly long stall if an ioctl like SNDCTL_SEQ_SYNC is issued and an event with the far future timestamp was queued. For fixing such a potential stall, this patch changes the mutex lock applied conditionally excluding such an ioctl command. Also, change the mutex_lock() with the interruptible version for user to allow escaping from the big-hammer mutex. Fixes: 80982c7e834e ("ALSA: seq: oss: Serialize ioctls") Suggested-by: Pavel Machek <pavel@ucw.cz> Link: https://lore.kernel.org/r/20200922083856.28572-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-08-05ALSA: seq: oss: Serialize ioctlsTakashi Iwai1-1/+7
Some ioctls via OSS sequencer API may race and lead to UAF when the port create and delete are performed concurrently, as spotted by a couple of syzkaller cases. This patch is an attempt to address it by serializing the ioctls with the existing register_mutex. Basically OSS sequencer API is an obsoleted interface and was designed without much consideration of the concurrency. There are very few applications with it, and the concurrent performance isn't asked, hence this "big hammer" approach should be good enough. Reported-by: syzbot+1a54a94bd32716796edd@syzkaller.appspotmail.com Reported-by: syzbot+9d2abfef257f3e2d4713@syzkaller.appspotmail.com Suggested-by: Hillf Danton <hdanton@sina.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200804185815.2453-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-07-09ALSA: Use fallthrough pseudo-keywordGustavo A. R. Silva2-2/+2
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20200708203236.GA5112@embeddedor Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-04-29ALSA: seq: oss: remove unused inline function snd_seq_oss_timer_is_realtimeYueHaibing1-10/+0
There's no callers in-tree. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20200429132805.18712-1-yuehaibing@huawei.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-03-16ALSA: seq: oss: Fix running status after receiving sysexTakashi Iwai1-0/+1
This is a similar bug like the previous case for virmidi: the invalid running status is kept after receiving a sysex message. Again the fix is to clear the running status after handling the sysex. Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/3b4a4e0f232b7afbaf0a843f63d0e538e3029bfd.camel@domdv.de Link: https://lore.kernel.org/r/20200316090506.23966-3-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-03-16ALSA: seq: virmidi: Fix running status after receiving sysexTakashi Iwai1-0/+1
The virmidi driver handles sysex event exceptionally in a short-cut snd_seq_dump_var_event() call, but this missed the reset of the running status. As a result, it may lead to an incomplete command right after the sysex when an event with the same running status was queued. Fix it by clearing the running status properly via alling snd_midi_event_reset_decode() for that code path. Reported-by: Andreas Steinmetz <ast@domdv.de> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/3b4a4e0f232b7afbaf0a843f63d0e538e3029bfd.camel@domdv.de Link: https://lore.kernel.org/r/20200316090506.23966-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-02-14ALSA: seq: Fix concurrent access to queue current tick/timeTakashi Iwai4-9/+20
snd_seq_check_queue() passes the current tick and time of the given queue as a pointer to snd_seq_prioq_cell_out(), but those might be updated concurrently by the seq timer update. Fix it by retrieving the current tick and time via the proper helper functions at first, and pass those values to snd_seq_prioq_cell_out() later in the loops. snd_seq_timer_get_cur_time() takes a new argument and adjusts with the current system time only when it's requested so; this update isn't needed for snd_seq_check_queue(), as it's called either from the interrupt handler or right after queuing. Also, snd_seq_timer_get_cur_tick() is changed to read the value in the spinlock for the concurrency, too. Reported-by: syzbot+fd5e0eaa1a32999173b2@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20200214111316.26939-3-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-02-14ALSA: seq: Avoid concurrent access to queue flagsTakashi Iwai1-4/+16
The queue flags are represented in bit fields and the concurrent access may result in unexpected results. Although the current code should be mostly OK as it's only reading a field while writing other fields as KCSAN reported, it's safer to cover both with a proper spinlock protection. This patch fixes the possible concurrent read by protecting with q->owner_lock. Also the queue owner field is protected as well since it's the field to be protected by the lock itself. Reported-by: syzbot+65c6c92d04304d0a8efc@syzkaller.appspotmail.com Reported-by: syzbot+e60ddfa48717579799dd@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20200214111316.26939-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-01-20Merge branch 'for-linus' into for-nextTakashi Iwai1-5/+9
Resolved the merge conflict in HD-audio Tegra driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-01-15ALSA: seq: Fix racy access for queue timer in proc readTakashi Iwai1-5/+9
snd_seq_info_timer_read() reads the information of the timer assigned for each queue, but it's done in a racy way which may lead to UAF as spotted by syzkaller. This patch applies the missing q->timer_mutex lock while accessing the timer object as well as a slight code change to adapt the standard coding style. Reported-by: syzbot+2b2ef983f973e5c40943@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200115203733.26530-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-01-05ALSA: seq: More constificationsTakashi Iwai3-8/+8
Apply const prefix to the remaining sequencer code: the static tables for MIDI macros, RPN/NRPN, and some strings. Just for minor optimization and no functional changes. Link: https://lore.kernel.org/r/20200105144823.29547-7-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-01-03ALSA: seq: Constify struct snd_midi_opTakashi Iwai1-15/+22
Change the argument of snd_midi_process_event() to receive a const snd_midi_op pointer and its callers respectively. This allows further optimizations. There should be no functional changes by this patch. Link: https://lore.kernel.org/r/20200103081714.9560-30-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-08ALSA: timer: Fix possible race at assigning a timer instanceTakashi Iwai1-6/+12
When a new timer instance is created and assigned to the active link in snd_timer_open(), the caller still doesn't (can't) set its callback and callback data. In both the user-timer and the sequencer-timer code, they do manually set up the callbacks after calling snd_timer_open(). This has a potential risk of race when the timer instance is added to the already running timer target, as the callback might get triggered during setting up the callback itself. This patch tries to address it by changing the API usage slightly: - An empty timer instance is created at first via the new function snd_timer_instance_new(). This object isn't linked to the timer list yet. - The caller sets up the callbacks and others stuff for the new timer instance. - The caller invokes snd_timer_open() with this instance, so that it's linked to the target timer. For closing, do similarly: - Call snd_timer_close(). This unlinks the timer instance from the timer list. - Free the timer instance via snd_timer_instance_free() after that. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20191107192008.32331-4-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-08-25ALSA: seq: Fix potential concurrent access to the deleted poolTakashi Iwai3-2/+20
The input pool of a client might be deleted via the resize ioctl, the the access to it should be covered by the proper locks. Currently the only missing place is the call in snd_seq_ioctl_get_client_pool(), and this patch papers over it. Reported-by: syzbot+4a75454b9ca2777f35c7@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-07-16ALSA: seq: Break too long mutex context in the write loopTakashi Iwai1-1/+10
The fix for the racy writes and ioctls to sequencer widened the application of client->ioctl_mutex to the whole write loop. Although it does unlock/relock for the lengthy operation like the event dup, the loop keeps the ioctl_mutex for the whole time in other situations. This may take quite long time if the user-space would give a huge buffer, and this is a likely cause of some weird behavior spotted by syzcaller fuzzer. This patch puts a simple workaround, just adding a mutex break in the loop when a large number of events have been processed. This shouldn't hit any performance drop because the threshold is set high enough for usual operations. Fixes: 7bd800915677 ("ALSA: seq: More protection for concurrent write and ioctl races") Reported-by: syzbot+97aae04ce27e39cbfca9@syzkaller.appspotmail.com Reported-by: syzbot+4c595632b98bb8ffcc66@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-07-08Merge tag 'asoc-v5.3' of ↵Takashi Iwai45-643/+45
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v5.3 This is a very big update, mainly thanks to Morimoto-san's refactoring work and some fairly large new drivers. - Lots more work on moving towards a component based framework from Morimoto-san. - Support for force disconnecting muxes from Jerome Brunet. - New drivers for Cirrus Logic CS47L35, CS47L85 and CS47L90, Conexant CX2072X, Realtek RT1011 and RT1308. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-06-28ALSA: seq: fix incorrect order of dest_client/dest_ports argumentsColin Ian King2-2/+2
There are two occurrances of a call to snd_seq_oss_fill_addr where the dest_client and dest_port arguments are in the wrong order. Fix this by swapping them around. Addresses-Coverity: ("Arguments in wrong order") Signed-off-by: Colin Ian King <colin.king@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156Thomas Gleixner43-643/+43
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1334 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner2-0/+2
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-09Merge tag 'sound-5.2-rc1' of ↵Linus Torvalds9-106/+113
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "The most significant changes at this cycle are the Sound Open Firmware support from Intel for the common DSP framework along with its support for Intel platforms. It's a door opened to a real "free" firmware (in the sense of FOSS), and other parties show interests in it. In addition to SOF, we've got a bunch of updates and fixes as usual. Some highlights are below. ALSA core: - Cleanups and fixes in ALSA timer code to cover some races spotted by syzkaller - Cleanups and fixes in ALSA sequencer code to cover some races, again unsurprisingly, spotted by syzkaller - Optimize the common page allocation helper with alloc_pages_exact() ASoC: - Add SOF core support, as well as Intel SOF platform support - Generic card driver improvements: support for MCLK/sample rate ratio and pin switches - A big set of improvements to TLV320AIC32x4 drivers - New drivers for Freescale audio mixers, several Intel machines, several Mediatek machines, Meson G12A, Spreadtrum compressed audio and DMA devices HD-audio: - A few Realtek codec fixes for reducing pop noises - Quirks for Chromebooks - Workaround for faulty connection report on AMD/Nvidia HDMI Others: - A quirk for Focusrite Scarlett Solo USB-audio - Add support for MOTU 8pre FireWire - 24bit sample format support in aloop - GUS patch format support (finally, over a decade) in native emux synth code" * tag 'sound-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (375 commits) ASoC: SOF: Fix unused variable warnings ALSA: line6: toneport: Fix broken usage of timer for delayed execution ALSA: aica: Fix a long-time build breakage ALSA: hda/realtek - Support low power consumption for ALC256 ASoC: stm32: i2s: update pcm hardware constraints ASoC: codec: hdac_hdmi: no checking monitor in hw_params ASoC: mediatek: mt6358: save PGA for mixer control ASoC: mediatek: mt6358: save output volume for mixer controls ASoC: mediatek: mt6358: initialize setting when ramping volume ASoC: SOF: core: fix undefined nocodec reference ASoC: SOF: xtensa: fix undefined references ASoC: SOF: Propagate sof_get_ctrl_copy_params() error properly ALSA: hdea/realtek - Headset fixup for System76 Gazelle (gaze14) ALSA: hda/intel: add CometLake PCI IDs ALSA: hda/realtek - Support low power consumption for ALC295 ASoC: rockchip: Fix an uninitialized variable compile warning ASoC: SOF: Fix a compile warning with CONFIG_PCI=n ASoC: da7219: Fix a compile warning at CONFIG_COMMON_CLK=n ASoC: sound/soc/sof/: fix kconfig dependency warning ASoC: stm32: spdifrx: change trace level on iec control ...
2019-05-06*: convert stream-like files from nonseekable_open -> stream_openKirill Smelkov1-1/+1
Using scripts/coccinelle/api/stream_open.cocci added in 10dce8af3422 ("fs: stream_open - opener for stream-like files so that read and write can run simultaneously without deadlock"), search and convert to stream_open all in-kernel nonseekable_open users for which read and write actually do not depend on ppos and where there is no other methods in file_operations which assume @offset access. I've verified each generated change manually - that it is correct to convert - and each other nonseekable_open instance left - that it is either not correct to convert there, or that it is not converted due to current stream_open.cocci limitations. The script also does not convert files that should be valid to convert, but that currently have .llseek = noop_llseek or generic_file_llseek for unknown reason despite file being opened with nonseekable_open (e.g. drivers/input/mousedev.c) Among cases converted 14 were potentially vulnerable to read vs write deadlock (see details in 10dce8af3422): drivers/char/pcmcia/cm4000_cs.c:1685:7-23: ERROR: cm4000_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/gnss/core.c:45:1-17: ERROR: gnss_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/hid/uhid.c:635:1-17: ERROR: uhid_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/infiniband/core/user_mad.c:988:1-17: ERROR: umad_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/input/evdev.c:527:1-17: ERROR: evdev_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/input/misc/uinput.c:401:1-17: ERROR: uinput_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/isdn/capi/capi.c:963:8-24: ERROR: capi_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/leds/uleds.c:77:1-17: ERROR: uleds_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/media/rc/lirc_dev.c:198:1-17: ERROR: lirc_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/s390/char/fs3270.c:488:1-17: ERROR: fs3270_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/usb/misc/ldusb.c:310:1-17: ERROR: ld_usb_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/xen/evtchn.c:667:8-24: ERROR: evtchn_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. net/batman-adv/icmp_socket.c:80:1-17: ERROR: batadv_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. net/rfkill/core.c:1146:8-24: ERROR: rfkill_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. and the rest were just safe to convert to stream_open because their read and write do not use ppos at all and corresponding file_operations do not have methods that assume @offset file access(*): arch/powerpc/platforms/52xx/mpc52xx_gpt.c:631:8-24: WARNING: mpc52xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_ibox_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_ibox_stat_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_mbox_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_mbox_stat_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_wbox_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_wbox_stat_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/um/drivers/harddog_kern.c:88:8-24: WARNING: harddog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. arch/x86/kernel/cpu/microcode/core.c:430:33-49: WARNING: microcode_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/ds1620.c:215:8-24: WARNING: ds1620_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/dtlk.c:301:1-17: WARNING: dtlk_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/ipmi/ipmi_watchdog.c:840:9-25: WARNING: ipmi_wdog_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/pcmcia/scr24x_cs.c:95:8-24: WARNING: scr24x_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/tb0219.c:246:9-25: WARNING: tb0219_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/firewire/nosy.c:306:8-24: WARNING: nosy_ops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/hwmon/fschmd.c:840:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/hwmon/w83793.c:1344:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/infiniband/core/ucma.c:1747:8-24: WARNING: ucma_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/infiniband/core/ucm.c:1178:8-24: WARNING: ucm_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/infiniband/core/uverbs_main.c:1086:8-24: WARNING: uverbs_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/input/joydev.c:282:1-17: WARNING: joydev_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/pci/switch/switchtec.c:393:1-17: WARNING: switchtec_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/platform/chrome/cros_ec_debugfs.c:135:8-24: WARNING: cros_ec_console_log_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/rtc/rtc-ds1374.c:470:9-25: WARNING: ds1374_wdt_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/rtc/rtc-m41t80.c:805:9-25: WARNING: wdt_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/s390/char/tape_char.c:293:2-18: WARNING: tape_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/s390/char/zcore.c:194:8-24: WARNING: zcore_reipl_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/s390/crypto/zcrypt_api.c:528:8-24: WARNING: zcrypt_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/spi/spidev.c:594:1-17: WARNING: spidev_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/staging/pi433/pi433_if.c:974:1-17: WARNING: pi433_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/acquirewdt.c:203:8-24: WARNING: acq_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/advantechwdt.c:202:8-24: WARNING: advwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/alim1535_wdt.c:252:8-24: WARNING: ali_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/alim7101_wdt.c:217:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ar7_wdt.c:166:8-24: WARNING: ar7_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/at91rm9200_wdt.c:113:8-24: WARNING: at91wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ath79_wdt.c:135:8-24: WARNING: ath79_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/bcm63xx_wdt.c:119:8-24: WARNING: bcm63xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/cpu5wdt.c:143:8-24: WARNING: cpu5wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/cpwd.c:397:8-24: WARNING: cpwd_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/eurotechwdt.c:319:8-24: WARNING: eurwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/f71808e_wdt.c:528:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/gef_wdt.c:232:8-24: WARNING: gef_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/geodewdt.c:95:8-24: WARNING: geodewdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ib700wdt.c:241:8-24: WARNING: ibwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ibmasr.c:326:8-24: WARNING: asr_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/indydog.c:80:8-24: WARNING: indydog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/intel_scu_watchdog.c:307:8-24: WARNING: intel_scu_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/iop_wdt.c:104:8-24: WARNING: iop_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/it8712f_wdt.c:330:8-24: WARNING: it8712f_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ixp4xx_wdt.c:68:8-24: WARNING: ixp4xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ks8695_wdt.c:145:8-24: WARNING: ks8695wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/m54xx_wdt.c:88:8-24: WARNING: m54xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/machzwd.c:336:8-24: WARNING: zf_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/mixcomwd.c:153:8-24: WARNING: mixcomwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/mtx-1_wdt.c:121:8-24: WARNING: mtx1_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/mv64x60_wdt.c:136:8-24: WARNING: mv64x60_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/nuc900_wdt.c:134:8-24: WARNING: nuc900wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/nv_tco.c:164:8-24: WARNING: nv_tco_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pc87413_wdt.c:289:8-24: WARNING: pc87413_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd.c:698:8-24: WARNING: pcwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd.c:737:8-24: WARNING: pcwd_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd_pci.c:581:8-24: WARNING: pcipcwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd_pci.c:623:8-24: WARNING: pcipcwd_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd_usb.c:488:8-24: WARNING: usb_pcwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd_usb.c:527:8-24: WARNING: usb_pcwd_temperature_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pika_wdt.c:121:8-24: WARNING: pikawdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pnx833x_wdt.c:119:8-24: WARNING: pnx833x_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/rc32434_wdt.c:153:8-24: WARNING: rc32434_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/rdc321x_wdt.c:145:8-24: WARNING: rdc321x_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/riowd.c:79:1-17: WARNING: riowd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sa1100_wdt.c:62:8-24: WARNING: sa1100dog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc60xxwdt.c:211:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc7240_wdt.c:139:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc8360.c:274:8-24: WARNING: sbc8360_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc_epx_c3.c:81:8-24: WARNING: epx_c3_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc_fitpc2_wdt.c:78:8-24: WARNING: fitpc2_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sb_wdog.c:108:1-17: WARNING: sbwdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sc1200wdt.c:181:8-24: WARNING: sc1200wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sc520_wdt.c:261:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sch311x_wdt.c:319:8-24: WARNING: sch311x_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/scx200_wdt.c:105:8-24: WARNING: scx200_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/smsc37b787_wdt.c:369:8-24: WARNING: wb_smsc_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/w83877f_wdt.c:227:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/w83977f_wdt.c:301:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wafer5823wdt.c:200:8-24: WARNING: wafwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/watchdog_dev.c:828:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdrtas.c:379:8-24: WARNING: wdrtas_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdrtas.c:445:8-24: WARNING: wdrtas_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt285.c:104:1-17: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt977.c:276:8-24: WARNING: wdt977_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt.c:424:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt.c:484:8-24: WARNING: wdt_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt_pci.c:464:8-24: WARNING: wdtpci_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt_pci.c:527:8-24: WARNING: wdtpci_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. net/batman-adv/log.c:105:1-17: WARNING: batadv_log_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. sound/core/control.c:57:7-23: WARNING: snd_ctl_f_ops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. sound/core/rawmidi.c:385:7-23: WARNING: snd_rawmidi_f_ops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. sound/core/seq/seq_clientmgr.c:310:7-23: WARNING: snd_seq_f_ops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. sound/core/timer.c:1428:7-23: WARNING: snd_timer_f_ops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. One can also recheck/review the patch via generating it with explanation comments included via $ make coccicheck MODE=patch COCCI=scripts/coccinelle/api/stream_open.cocci SPFLAGS="-D explain" (*) This second group also contains cases with read/write deadlocks that stream_open.cocci don't yet detect, but which are still valid to convert to stream_open since ppos is not used. For example drivers/pci/switch/switchtec.c calls wait_for_completion_interruptible() in its .read, but stream_open.cocci currently detects only "wait_event*" as blocking. Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Yongzhi Pan <panyongzhi@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Juergen Gross <jgross@suse.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Tejun Heo <tj@kernel.org> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Nikolaus Rath <Nikolaus@rath.org> Cc: Han-Wen Nienhuys <hanwen@google.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James R. Van Zandt" <jrv@vanzandt.mv.com> Cc: Corey Minyard <minyard@acm.org> Cc: Harald Welte <laforge@gnumonks.org> Acked-by: Lubomir Rintel <lkundrak@v3.sk> [scr24x_cs] Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Johan Hovold <johan@kernel.org> Cc: David Herrmann <dh.herrmann@googlemail.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Jean Delvare <jdelvare@suse.com> Acked-by: Guenter Roeck <linux@roeck-us.net> [watchdog/* hwmon/*] Cc: Rudolf Marek <r.marek@assembler.cz> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Kurt Schwemmer <kurt.schwemmer@microsemi.com> Acked-by: Logan Gunthorpe <logang@deltatee.com> [drivers/pci/switch/switchtec] Acked-by: Bjorn Helgaas <bhelgaas@google.com> [drivers/pci/switch/switchtec] Cc: Benson Leung <bleung@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> [platform/chrome] Cc: Alessandro Zummo <a.zummo@towertech.it> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> [rtc/*] Cc: Mark Brown <broonie@kernel.org> Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Zwane Mwaikambo <zwanem@gmail.com> Cc: Marek Lindner <mareklindner@neomailbox.ch> Cc: Simon Wunderlich <sw@simonwunderlich.de> Cc: Antonio Quartulli <a@unstable.cc> Cc: "David S. Miller" <davem@davemloft.net> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Signed-off-by: Kirill Smelkov <kirr@nexedi.com>
2019-04-15ALSA: seq: Correct unlock sequence at snd_seq_client_ioctl_unlock()Takashi Iwai1-1/+6
The doubly unlock sequence at snd_seq_client_ioctl_unlock() is tricky. I took a direct unref call since I thought it would avoid misunderstanding, but rather this seems more confusing. Let's use snd_seq_client_unlock() consistently even if they look strange to be called twice, and add more comments for avoiding reader's confusion. Fixes: 6b580f523172 ("ALSA: seq: Protect racy pool manipulation from OSS sequencer") Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-04-13Merge branch 'for-linus' into for-nextTakashi Iwai2-6/+7
Back-merge the 5.1 devel branch for the further HD-audio development. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-04-12ALSA: seq: Protect racy pool manipulation from OSS sequencerTakashi Iwai3-5/+49
OSS sequencer emulation still allows to queue and issue the events that manipulate the client pool concurrently in a racy way. This patch serializes the access like the normal sequencer write / ioctl via taking the client ioctl_mutex. Since the access to the sequencer client is done indirectly via a client id number, a new helper to take/release the mutex is introduced. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-04-12ALSA: seq: Simplify snd_seq_kernel_client_enqueue() helperTakashi Iwai4-42/+12
We have two helpers for queuing a sequencer event from the kernel client, and both are used only from OSS sequencer layer without any hop and atomic set. Let's simplify and unify two helpers into one. No functional change, just a call pattern change. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-04-12ALSA: seq: Cover unsubscribe_port() in list_mutexTakashi Iwai1-1/+1
The call of unsubscribe_port() which manages the group count and module refcount from delete_and_unsubscribe_port() looks racy; it's not covered by the group list lock, and it's likely a cause of the reported unbalance at port deletion. Let's move the call inside the group list_mutex to plug the hole. Reported-by: syzbot+e4c8abb920efa77bace9@syzkaller.appspotmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-04-11Revert "ALSA: seq: Protect in-kernel ioctl calls with mutex"Takashi Iwai1-7/+2
This reverts commit feb689025fbb6f0aa6297d3ddf97de945ea4ad32. The fix attempt was incorrect, leading to the mutex deadlock through the close of OSS sequencer client. The proper fix needs more consideration, so let's revert it now. Fixes: feb689025fbb ("ALSA: seq: Protect in-kernel ioctl calls with mutex") Reported-by: syzbot+47ded6c0f23016cde310@syzkaller.appspotmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-04-09ALSA: seq: Fix race of get-subscription call vs port-delete ioctlsTakashi Iwai3-15/+13
The snd_seq_ioctl_get_subscription() retrieves the port subscriber information as a pointer, while the object isn't protected, hence it may be deleted before the actual reference. This race was spotted by syzkaller and may lead to a UAF. The fix is simply copying the data in the lookup function that performs in the rwsem to protect against the deletion. Reported-by: syzbot+9437020c82413d00222d@syzkaller.appspotmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-04-09ALSA: seq: Protect in-kernel ioctl calls with mutexTakashi Iwai1-2/+7
ALSA OSS sequencer calls the ioctl function indirectly via snd_seq_kernel_client_ctl(). While we already applied the protection against races between the normal ioctls and writes via the client's ioctl_mutex, this code path was left untouched. And this seems to be the cause of still remaining some rare UAF as spontaneously triggered by syzkaller. For the sake of robustness, wrap the ioctl_mutex also for the call via snd_seq_kernel_client_ctl(), too. Reported-by: syzbot+e4c8abb920efa77bace9@syzkaller.appspotmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-28 07:41:27 +0300