summaryrefslogtreecommitdiff
path: root/sound/isa
AgeCommit message (Collapse)AuthorFilesLines
2018-08-03ALSA: isa: Remove empty init and exitTakashi Iwai7-112/+0
For a sake of code simplification, remove the init and the exit entries that do nothing. Notes for readers: actually it's OK to remove *both* init and exit, but not OK to remove the exit entry. By removing only the exit while keeping init, the module becomes permanently loaded; i.e. you cannot unload it any longer! Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-08-03ALSA: gus: fix spelling mistake "acumulator" -> "accumulator"Colin Ian King1-1/+1
Trivial spelling mistake fix in debug message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-08-03ALSA: es18xx: mark expected switch fall-throughGustavo A. R. Silva1-0/+1
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 115075 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-08-03ALSA: opti9xx: mark expected switch fall-throughsGustavo A. R. Silva1-0/+5
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 402016 ("Missing break in switch") Addresses-Coverity-ID: 1056542 ("Missing break in switch") Addresses-Coverity-ID: 1339579 ("Missing break in switch") Addresses-Coverity-ID: 1369526 ("Missing break in switch") Addresses-Coverity-ID: 1369529 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-08-03ALSA: opti92x: mark expected switch fall-throughsGustavo A. R. Silva1-0/+3
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1165394 ("Missing break in switch") Addresses-Coverity-ID: 1167851 ("Missing break in switch") Addresses-Coverity-ID: 402015 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-08-03ALSA: galaxy: Mark expected switch fall-throughsGustavo A. R. Silva1-0/+3
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1468367 ("Missing break in switch") Addresses-Coverity-ID: 115037 ("Missing break in switch") Addresses-Coverity-ID: 115038 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-08-02ALSA: sb: Fix a typoTakashi Iwai1-1/+1
There was a typo of COPY_USER in the dead code (that is disabled as default). Fixes: 4b83eff81c81 ("ALSA: sb: Convert to the new PCM ops") Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-27ALSA: sb: Proper endian notationsTakashi Iwai1-15/+15
The data types defined in SB CSP driver code are all in little-endian, hence the proper type like __le32 should be used. Spotted by sparse, a warning like: sound/isa/sb/sb16_csp.c:330:14: warning: cast to restricted __le32 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-27ALSA: sb: Fix sparse warning wrt PCM format typeTakashi Iwai1-3/+3
The PCM format type is with __bitwise, and it can't be converted from integer implicitly. Instead of an ugly cast, declare the function argument of snd_sb_csp_autoload() with the proper snd_pcm_format_t type. This fixes the sparse warnings like: sound/isa/sb/sb16_csp.c:743:22: warning: restricted snd_pcm_format_t degrades to integer Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-27ALSA: sb: Fix PCM format bit calculationTakashi Iwai1-3/+6
The PCM format type in snd_pcm_format_t can't be treated as integer implicitly since it's with __bitwise. We have already a helper function to get the bit index of the given type, and use it in each place instead. This fixes sparse warnings like: sound/isa/sb/sb16_main.c:61:44: warning: restricted snd_pcm_format_t degrades to integer Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-27ALSA: wss: Fix sparse warning wrt PCM format typeTakashi Iwai1-1/+1
The PCM format type is with __bitwise, and it can't be converted from integer implicitly. Instead of an ugly cast, declare the function argument of snd_wss_get_format() with the proper snd_pcm_format_t type. This fixes the sparse warnings like: sound/isa/wss/wss_lib.c:551:14: warning: restricted snd_pcm_format_t degrades to integer Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-27ALSA: ad1816a: Fix sparse warning wrt PCM format typeTakashi Iwai1-1/+2
The PCM format type is with __bitwise, and it can't be converted from integer implicitly. Instead of an ugly cast, declare the function argument of snd_ad1816a_get_format() with the proper snd_pcm_format_t type. This fixes the sparse warning like: sound/isa/ad1816a/ad1816a_lib.c:93:14: warning: restricted snd_pcm_format_t degrades to integer Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-26ALSA: msnd: Use NULL instead of 0Takashi Iwai1-1/+1
Fix a sparse warning: sound/isa/msnd/msnd_pinnacle.c:813:1: warning: Using plain integer as NULL pointer Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-26ALSA: msnd: Fix the default sample sizesTakashi Iwai1-2/+2
The default sample sizes set by msnd driver are bogus; it sets ALSA PCM format, not the actual bit width. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-26ALSA: msnd: Add missing __iomem annotationsTakashi Iwai4-12/+12
The io-mapped buffers used in msnd drivers need __iomem annotations. This fixes sparse warnings like: sound/isa/msnd/msnd_pinnacle.c:172:45: warning: incorrect type in initializer (different address spaces) Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-17ALSA: emu8000: Use swap macro in snd_emu8000_sample_newGustavo A. R. Silva1-5/+2
Make use of the swap macro and remove unnecessary variable *tmp*. This makes the code easier to read and maintain. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-16ALSA: sb8: remove redundant pointer runtimeColin Ian King1-3/+0
Pointer runtime is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'runtime' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-16ALSA: gus: remove redundant pointer private_dataColin Ian King1-2/+0
Pointer private_data is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'private_data' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-16ALSA: es1688: remove redundant pointer chipColin Ian King1-2/+0
Pointer chip is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'chip' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-06-26ALSA: Fix references to Documentation/.*/MultiSoundMauro Carvalho Chehab1-1/+1
Now that the documentation/script file got restored, fix the references within the Kernel tree. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-06-07Merge tag 'media/v4.18-2' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - remove of atomisp driver from staging, as nobody would have time to dedicate huge efforts to fix all the problems there. Also, we have a feeling that the driver may not even run the way it is. - move Zoran driver to staging, in order to be either fixed to use VB2 and the proper media kAPIs or to be removed - remove videobuf-dvb driver, with is unused for a while - some V4L2 documentation fixes/improvements - new sensor drivers: imx258 and ov7251 - a new driver was added to allow using I2C transparent drivers - several improvements at the ddbridge driver - several improvements at the ISDB pt1 driver, making it more coherent with the DVB framework - added a new platform driver for MIPI CSI-2 RX: cadence - now, all media drivers can be compiled on x86 with COMPILE_TEST - almost all media drivers now build on non-x86 architectures with COMPILE_TEST - lots of other random stuff: cleanups, support for new board models, bug fixes, etc * tag 'media/v4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (464 commits) media: omap2: fix compile-testing with FB_OMAP2=m media: media/radio/Kconfig: add back RADIO_ISA media: v4l2-ioctl.c: fix missing unlock in __video_do_ioctl() media: pxa_camera: ignore -ENOIOCTLCMD from v4l2_subdev_call for s_power media: arch: sh: migor: Fix TW9910 PDN gpio media: staging: tegra-vde: Reset VDE regardless of memory client resetting failure media: marvel-ccic: mmp: select VIDEOBUF2_VMALLOC/DMA_CONTIG media: marvel-ccic: allow ccic and mmp drivers to coexist media: uvcvideo: Prevent setting unavailable flags media: ddbridge: conditionally enable fast TS for stv0910-equipped bridges media: dvb-frontends/stv0910: make TS speed configurable media: ddbridge/mci: add identifiers to function definition arguments media: ddbridge/mci: protect against out-of-bounds array access in stop() media: rc: ensure input/lirc device can be opened after register media: rc: nuvoton: Keep device enabled during reg init media: rc: nuvoton: Keep track of users on CIR enable/disable media: rc: nuvoton: Tweak the interrupt enabling dance media: uvcvideo: Support realtek's UVC 1.5 device media: uvcvideo: Fix driver reference counting media: gspca_zc3xx: Enable short exposure times for OV7648 ...
2018-05-28sound: Use octal not symbolic permissionsJoe Perches1-16/+16
Convert the S_<FOO> symbolic permissions to their octal equivalents as using octal and not symbolic permissions is preferred by many as more readable. see: https://lkml.org/lkml/2016/8/2/1945 Done with automated conversion via: $ ./scripts/checkpatch.pl -f --types=SYMBOLIC_PERMS --fix-inplace <files...> Miscellanea: o Wrapped one multi-line call to a single line Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-05-02ALSA: sc6000: fix spelling mistake: "iomaped" -> "iomapped"Colin Ian King1-2/+2
Trivial fix to spelling mistake in KERN_ERR error messages Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-04-23ALSA: cmi8328: array_find() can be statickbuild test robot1-2/+2
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-04-20media: sound, isapnp: allow building more drivers with COMPILE_TESTMauro Carvalho Chehab1-3/+3
Drivers that depend on ISAPNP currently can't be built with COMPILE_TEST. However, looking at isapnp.h, there are already stubs there to allow drivers to include it even when isa PNP is not supported. So, remove such dependencies when COMPILE_TEST. Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-04-20media: sound, media: allow building ISA drivers it with COMPILE_TESTMauro Carvalho Chehab1-4/+5
All sound drivers that don't depend on PNP can be safelly build with COMPILE_TEST, as ISA provides function stubs to be used for such purposes. As a side effect, with this change, the radio-miropcm20 can now be built outside i386 with COMPILE_TEST. It should be noticed that ISAPNP currently depends on ISA. So, on drivers that depend on it, we need to add an explicit dependency on ISA, at least until another patch removes it. Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-29ALSA: gus: Delete an error message for a failed memory allocation in ↵Markus Elfring1-3/+2
snd_gf1_dma_transfer_block() Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-11-13Merge tag 'asoc-v4.15' of ↵Takashi Iwai5-0/+5
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v4.15 The biggest thing this release has been the conversion of the AC98 bus to the driver model, that's been a long time coming so thanks to Robert Jarzmik for his dedication there. Due to there being some AC97 MFD there's a few fairly large changes in input and the MFD layer, mainly to the wm97xx driver. There's also some drivers/drm changes to support the new AMD Stoney platform, these are shared with the DRM subsystem and should be being merged via both. Within the subsystem the overwhelming bulk of the changes is in the Intel drivers which continue to need lots of cleanups and fixes, this release they've also gained support for their open source firmware. There's also some large changs in the core as Morimoto-san continues to mirror operations into the component level in preparation for conversion of drivers to that. - The AC97 bus has finally caught up with the driver model thanks to some dedicated and persistent work from Robert Jarzmik. - Continued work from Morimoto-san on moving us towards being able to use components for everything. - Lots of cleanups for the Intel platform code, including support for their open source audio firmware. - Support for scaling MCLK with sample rate in simple-card. - Support for AMD Stoney platform.
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman5-0/+5
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-25ALSA: sb: Minor optimization / fix of timer usage in sb8_midi.cTakashi Iwai1-2/+2
Currently the SB8 MIDI code sets up the timer object at each time before scheduling it at trigger callback, but basically this is superfluous once after set up. Also, the code misses the del_timer_sync() call that may leave a race condition for use-after-free. This patch addresses these issues, moving timer_setup() to snd_sb8dsp_midi(), and adding the del_timer_sync() call at snd_sb8dsp_midi_output_trigger() to make sure. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-10-25ALSA: sb: Convert timers to use timer_setup()Kees Cook2-9/+8
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. [Re-use the existing chip->midi_substream_output instead of assigning a new field to struct snd_sb -- tiwai] Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-10-24ALSA: wavefront: Convert timers to use timer_setup()Kees Cook1-5/+5
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-17ALSA: isa: make snd_pcm_hardware constBhumika Goyal9-17/+17
Make these const as they are only used in a copy operation. Done using Coccinelle. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-17ALSA: wavefront: constify pnp_card_device_idArvind Yadav1-1/+1
pnp_card_device_id are not supposed to change at runtime. All functions working with pnp_card_device_id provided by <linux/pnp.h> work with const pnp_card_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-17ALSA: sscape: constify pnp_card_device_idArvind Yadav1-1/+1
pnp_card_device_id are not supposed to change at runtime. All functions working with pnp_card_device_id provided by <linux/pnp.h> work with const pnp_card_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-17ALSA: sb16: constify pnp_card_device_idArvind Yadav1-1/+1
pnp_card_device_id are not supposed to change at runtime. All functions working with pnp_card_device_id provided by <linux/pnp.h> work with const pnp_card_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-17ALSA: opti9xx: constify pnp_card_device_idArvind Yadav2-2/+2
pnp_card_device_id are not supposed to change at runtime. All functions working with pnp_card_device_id provided by <linux/pnp.h> work with const pnp_card_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-17ALSA: msnd: constify pnp_card_device_idArvind Yadav1-1/+1
pnp_card_device_id are not supposed to change at runtime. All functions working with pnp_card_device_id provided by <linux/pnp.h> work with const pnp_card_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-17ALSA: gus: constify pnp_card_device_idArvind Yadav1-1/+1
pnp_card_device_id are not supposed to change at runtime. All functions working with pnp_card_device_id provided by <linux/pnp.h> work with const pnp_card_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-17ALSA: es1688: constify pnp_card_device_idArvind Yadav1-1/+1
pnp_card_device_id are not supposed to change at runtime. All functions working with pnp_card_device_id provided by <linux/pnp.h> work with const pnp_card_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-17ALSA: cs4236: constify pnp_card_device_idArvind Yadav1-1/+1
pnp_card_device_id are not supposed to change at runtime. All functions working with pnp_card_device_id provided by <linux/pnp.h> work with const pnp_card_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-17ALSA: cmi8330: constify pnp_card_device_idArvind Yadav1-1/+1
pnp_card_device_id are not supposed to change at runtime. All functions working with pnp_card_device_id provided by <linux/pnp.h> work with const pnp_card_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-17ALSA: azt2320: constify pnp_card_device_idArvind Yadav1-1/+1
pnp_card_device_id are not supposed to change at runtime. All functions working with pnp_card_device_id provided by <linux/pnp.h> work with const pnp_card_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-17ALSA: als100: constify pnp_card_device_idArvind Yadav1-1/+1
pnp_card_device_id are not supposed to change at runtime. All functions working with pnp_card_device_id provided by <linux/pnp.h> work with const pnp_card_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-17ALSA: ad1816a: constify pnp_card_device_idArvind Yadav1-1/+1
pnp_card_device_id are not supposed to change at runtime. All functions working with pnp_card_device_id provided by <linux/pnp.h> work with const pnp_card_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-17ALSA: opl3sa2: constify pnp_device_id and pnp_card_device_idArvind Yadav1-2/+2
*_device_id are not supposed to change at runtime. All functions working with *_device_id provided by <linux/pnp.h> work with const *_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-17ALSA: es18xx: constify pnp_device_id and pnp_card_device_idArvind Yadav1-2/+2
*_device_id are not supposed to change at runtime. All functions working with *_device_id provided by <linux/pnp.h> work with const *_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-15sound: emu8000: constify emu8000_opsJulia Lawall1-1/+1
The structure emu8000_ops is only copied into another structure, so it can be const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-13ALSA: wss: constify snd_pcm_ops structuresArvind Yadav1-2/+2
snd_pcm_ops are not supposed to change at runtime. All functions working with snd_pcm_ops provided by <sound/pcm.h> work with const snd_pcm_ops. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-13ALSA: sb8: constify snd_pcm_ops structuresArvind Yadav1-2/+2
snd_pcm_ops are not supposed to change at runtime. All functions working with snd_pcm_ops provided by <sound/pcm.h> work with const snd_pcm_ops. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>