summaryrefslogtreecommitdiff
path: root/sound/soc/codecs/twl6040.c
AgeCommit message (Collapse)AuthorFilesLines
2012-09-22ASoC: twl6040: Convert to use DAI DAPM widgetsPeter Ujfalusi1-14/+29
Use DAPM mapping for stream events and give unique names for the streams. This change also fixes the following warning: twl6040-codec twl6040-codec: Failed to create Capture debugfs file Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-30Merge tag 'mfd-3.6-1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 Pull MFD bits from Samuel Ortiz: "We have support for a few new drivers: - Samsung s2mps11 - Wolfson Microelectronics wm5102 and wm5110 - Marvell 88PM800 and 88PM805 - TI twl6041 We also have our regular driver improvements: - Device tree and IRQ domain support for STE AB8500 - Regmap and devm_* API conversion for TI tps6586x - Device tree support for Samsung max77686 - devm_* API conversion for STE AB3100 Besides that, quite a lot of fixing and cleanup for mc13xxx, tps65910, tps65090, da9052 and twl-core." Fix up mostly trivial conflicts, with the exception of drivers/usb/host/ehci-omap.c in particular, which had some re-organization of the reset sequence (commit 1a49e2ac9651: "EHCI: centralize controller initialization") that clashed with commit 2761a6394516 ("mfd: USB: Fix the omap-usb EHCI ULPI PHY reset fix issues"). In particular, commit 2761a6394516 moved the usb_add_hcd() to the *middle* of the reset sequence, which clashes fairly badly with the reset sequence re-organization (although it could have been done inside the new omap_ehci_init() function). I left that part of commit 2761a6394516 just undone. * tag 'mfd-3.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (110 commits) mfd: Ensure AB8500 platform data is passed through db8500-prcmu to MFD Core mfd: Arizone core should select MFD_CORE mfd: Fix arizona-irq.c build by selecting REGMAP_IRQ mfd: Add debug trace on entering and leaving arizone runtime suspend mfd: Correct tps65090 cell names mfd: Remove gpio support from tps6586x core driver ARM: tegra: defconfig: Enable tps6586x gpio gpio: tps6586x: Add gpio support through platform driver mfd: Cache tps6586x register through regmap mfd: Use regmap for tps6586x register access. mfd: Use devm managed resources for tps6586x input: Add onkey support for 88PM80X PMIC mfd: Add support for twl6041 mfd: Fix twl6040 revision information mfd: Matches should be NULL when populate anatop child devices input: ab8500-ponkey: Create AB8500 domain IRQ mapping mfd: Add missing out of memory check for pcf50633 Documentation: Describe the AB8500 Device Tree bindings mfd: Add tps65910 32-kHz-crystal-input init mfd: Drop modifying mc13xxx driver's id_table in probe ...
2012-07-25mfd: Fix twl6040 revision informationPeter Ujfalusi1-1/+1
twl6040 ES1.1 and ES1.2 have the same revid (0x01). ES1.3 of twl6040 REVID is 0x02. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-06ASoC: twl6040: fix spelling mistakeSimon Wilson1-1/+1
Fix spelling mistake in "High-Performance" option of twl6040 power mode. Signed-off-by: Simon Wilson <simonwilson@google.com> Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-13Merge tag 'v3.4-rc7' into for-3.5Mark Brown1-2/+1
Linux 3.4-rc7 Conflicts): drivers/base/regmap/regmap.c (overlap with bug fixes) sound/soc/blackfin/bf5xx-ssm2602.c (overlap with bug fixes)
2012-05-07ASoC: twl6040: Remove HS/HF gain ramp featurePeter Ujfalusi1-429/+12
None of the machines uses the gain ramp possibility for HS/HF. This code path is mostly unused and it does not reduces the pop noise on the output (it alters it to sound a bit different). The preferred method to reduce pop noise is to use ABE. Remove the gain ramp, and related features form the driver. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-16mfd: Convert twl6040 to i2c driver, and separate it from twl corePeter Ujfalusi1-2/+1
Complete the separation of the twl6040 from the twl core since it is a separate chip, not part of the twl6030 PMIC. Make the needed Kconfig changes for the depending drivers at the same time to avoid breaking the kernel build (vibra, ASoC components). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonicro.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-04-04ASoC: codecs: Remove rtd->codec usage from CODEC driversMark Brown1-6/+3
In order to support CODEC<->CODEC links remove the assumption that there is only a single CODEC on a DAI link by removing the use of the CODEC pointer in the rtd from the CODEC drivers. They are already being passed their DAI whenever they are passed an rtd and can get the CODEC from there. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-05Merge tag 'asoc-3.4' of ↵Takashi Iwai1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into topic/asoc This has been a very active release for ASoC, as well as the usual raft of bugfixes and driver updates there's quite a few framework enhancements. Most are either small or are laying the groundwork for user visible features (especially dynamic PCM), the most directly visible change is the dmaengine library. There's also a bunch of regmap API enhancements pulled into the tree so that either the framework or drivers can take advantage of the new features. Changes include: - Support for widgets not associated with a CODEC, an important part of the dynamic PCM framework. - A library factoring out the common code shared by dmaengine based DMA drivers contributed by Lars-Peter Clausen. This will save a lot of code and make it much easier to deploy enhancements to dmaengine. - Support for binary controls, used for providing runtime configuration of algorithm coefficients. - A new DAPM widget type for regulator supplies allowing drivers for devices that can power down unused supplies while active to do without any per-driver code. - DAPM widgets for DAIs, initially giving a speed boost for playback startup and shutdown and also the basis for CODEC<->CODEC DAI link support. - Support for specifying the number of significant bits on audio interfaces, useful for allowing applications to know how much effort to put into generating data for a larger sample format. - Conversion of the FSI driver used on some SH processors to DMAEngine. - New CODEC drivers for Maxim MAX9768 and Wolfson Microelectronics WM2200.
2012-02-09ASoC: twl6040: Move ignore_pmdown_time to driver structMark Brown1-1/+1
It's set unconditionally. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
2012-01-26ASoC: twl6040: Convert MICBIAS to SUPPLY widgetPeter Ujfalusi1-8/+8
In order to avoid breakage change the omap-abe-twl6040 machine driver's routing. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: twl6040 - add method to query HS DC offset step size in mVLiam Girdwood1-0/+13
Provide a method for mach drivers to query the HS DC offset step size in mV. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-11ASoC: twl6040 - Add method to query optimum PDM_DL1 gainLiam Girdwood1-0/+23
The DL1 PDM interface adds a little gain depending on the output device. Add a method to retrieve the gain value for machine driver usage. Signed-off-by: Liam Girdwood <lrg@ti.com>
2011-12-02ASoC: Drop unused state parameter from CODEC suspend callbackLars-Peter Clausen1-1/+1
The existence of this parameter is purely historical. None of the CODEC drivers uses it and we always pass in the same value anyway, so it should be safe to remove it. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-28ASoC: Convert CODEC drivers to module_platform_driverMark Brown1-11/+1
Factors out a bit of boilerplate. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-23ASoC: Constify snd_soc_dai_ops structsLars-Peter Clausen1-1/+1
Commit 1ee46ebd("ASoC: Make the DAI ops constant in the DAI structure") introduced the possibility to have constant DAI ops structures, yet this is barley used in both existing drivers and also new drivers being submitted, although none of them modifies its DAI ops structure. The later is not surprising since existing drivers are often used as templates for new drivers. So this patch just constifies all existing snd_soc_dai_ops structs to eliminate the issue altogether. The patch was generated with the following coccinelle semantic patch: // <smpl> @@ identifier ops; @@ -struct snd_soc_dai_ops ops = +const struct snd_soc_dai_ops ops = { ... }; // </smpl> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-14ASoC: twl6040: Request core to inline the DAPM sequencePeter Ujfalusi1-0/+1
We need to have as less time between McPDM shutdown, and power down of the DAC on the twl6040 codec as possible. Request core to ignore the pmdown_time for the playback stream. Backround: with the McPDM protocol we are sendning not only the pure audio stream, but OMAP McPDM also transmits additional information (for example offset cancellation). If McPDM is stopped prior to the DAC this information will be not sent to the codec, which can result noise rendered by the twl6040 codec. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-13ASoC: twl6040: Rename the Earphone Driver event handlerPeter Ujfalusi1-2/+2
Since the event handler is only used by the Earphone Driver, it is better to rename it from twl6040_power_mode_event to twl6040_ep_drv_event. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-13ASoC: twl6040: Change event ordering for Earphone driverPeter Ujfalusi1-1/+1
It is better to switch HS Power Mode (if it was in low power mode) before we enable the Earpiece driver. The switched off EP driver can filter out noise coming from the Low Power to High Performance transition on the HSL DAC. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-13ASoC: twl6040: Remove PLL usage restrictionsPeter Ujfalusi1-31/+9
There is no limitation dictated by outputs or inputs regarding to the selected PLL (LP/HP). Remove the checks for this, and allow all path with any PLL configuration. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-13ASoC: twl6040: Remove Capture restriction for 17.64MHz sysclkPeter Ujfalusi1-7/+0
Capture is supported in all PLL configuration. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-12ASoC: twl6040: Workaround for headset DC offset caused pop noisePeter Ujfalusi1-8/+28
Both Headset DAC need to be turned on/off at the same time before any of the output drivers are enabled (HS Left/Right, Earpiece). Move the HS DAC enable code to sequenced DAPM_SUPPLY, and attach it to the DACs. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-12ASoC: twl6040: Support for vibra output pathsPeter Ujfalusi1-0/+72
twl6040 have two vibra output drivers. They can be operated with audio stream coming through the PDM interface (fifth channel). The vibra outputs can be controlled via the input/FF driver as well. Selection between the two mode is implemented within the codec driver, the input/FF driver can only operate if the routing is set to "Input FF". Changing from "Input FF" to "Audio PDM" mode is protected as well: The switchin can only be done, if there is no running effect from the input/FF. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-11ASoC: twl6040: Convert to table based initPeter Ujfalusi1-21/+10
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-05ASoC: twl6040: Warn user in twl6040_put_volsw for error casePeter Ujfalusi1-0/+2
Let the user know, that the callback has been called with unexpected register parameter. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-05ASoC: twl6040: Simply call snd_soc_put_volsw form the custom codePeter Ujfalusi1-9/+2
The ASoC core now have one callback function, which can handle single, and double register mixer controls. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-05ASoC: twl6040: Prepare for core put_volsw/volsw_2r mergerPeter Ujfalusi1-2/+4
Avoid using the mc->rreg to identify the 2r type of gain control. Introduce a variable to track this. This change is needed to avoid breakage with the upcoming volsw volsw_2r merger. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-05ASoC: twl6040: Simplify custom get_volsw callbackPeter Ujfalusi1-12/+6
The custom get_volsw does not need to call any core get_volsw calls, since we are returning the shadow values for the gains. Return -EINVAL in the unlikely event, if the function has been called for unhandled control. This way we can remove one check in the code. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-05ASoC: Consolidate use of controls with custom get/put functionPeter Ujfalusi1-31/+6
Use the macros for controls require custom get/put function. This is to make sure that the soc_mixer_control is used consistently among the drivers. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Arun KS <arunks@mistralsolutions.com> Cc: Misael Lopez Cruz <misael.lopez@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-04ASoC: twl6040: Simplify custom put_volsw callbackPeter Ujfalusi1-7/+5
Return -EINVAL in the unlikely event, if the function has been called for unhandled control. This way we can remove one check in the code. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-30ASoC: twl6040: Simplify code in out_drv_event for pending work checkPeter Ujfalusi1-16/+22
Instead of checking, if the work is pending, it is safer to cancel the pending work, or wait till the scheduled work finishes. This way we can avoid modifying the variables used by the work function. Since we know that no work is pending, we can remove the two additional checks in POST_PMU, and PRE_PMD for non pending works. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-30ASoC: twl6040: Shift 2 identifies the HS output in out_drv_eventPeter Ujfalusi1-3/+2
None of the driver handled by out_drv_event have it's power bit shifted by 3. Remove the case for shift 3, and also add comment for the cases. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-30ASoC: twl6040: correct loop counters for HS/HF ramp codePeter Ujfalusi1-4/+5
The Headset gain range is 0 - 0xf (4 bit resolution) The Handsfree gain range is 0 - 0x1d (5 bit resolution, 0x1e, and 0x1f values are invalid) Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-30ASoC: twl6040: One workqueue should be enoughPeter Ujfalusi1-28/+5
It is a bit overkill to have three (3) separate workqueue for a single driver. We can manage things with one workqueue nicely. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-27ASoC: twl6040: No need to change delay during HF rampPeter Ujfalusi1-10/+2
The Handsfree gain have 2dB steps all the way, so there is no reason to have different delays as we approaching to the end of the scale. The comment was also wrong, since we have 0dB at 0x3 raw, at 16 the gain is -26dB. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-27ASoC: twl6040: No need to change delay during HS rampPeter Ujfalusi1-10/+2
The Headset gain have 2dB steps all the way, so there is no reason to have different delays as we approaching to the end of the scale. The comment was also wrong, since we have 0dB at 0x0 raw at one end of the range, and not in the middle. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-27ASoC: twl6040: Move the delayed_work for HS detection under twl6040_jack_dataPeter Ujfalusi1-4/+4
The delayed_work named 'delayed_work' is for the headset detection, so move it to the twl6040_jack_data struct. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-27ASoC: twl6040: Move delayed_work struct inside twl6040_output for HS/HFPeter Ujfalusi1-8/+7
The delayed works for the output can be moved within the twl6040_output struct (from the twl6040_data) to be better organized. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-27ASoC: twl6040: Combine the custom volsw get, and put functionsPeter Ujfalusi1-64/+17
We can manage with one set of get, and put function for the gain controls we need to handle with custom code due to the shadowing of the register. For both get, and put function we can call decide based on the mc->rreg value, if we need to call the volsw, or the vlosw_2r variant (in 2r case rreg is not 0). Handling of the shadow values are the same for both type of controls. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-27ASoC: twl6040: Rename pga_event to out_drv_eventPeter Ujfalusi1-6/+5
This event handler is used with the OUT_DRV widgets. The name pga_event was misleading. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-27ASoC: twl6040: Function to fetch the TRIM valuesPeter Ujfalusi1-0/+9
Provide API to fetch the TRIM values (for machine drivers) Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-27ASoC: twl6040: Read the TRIM values from the chipPeter Ujfalusi1-0/+7
Update the reg_cache with values from chip regarding to TRIM. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-23ASoC: twl6040: No need to read the INTID registerPeter Ujfalusi1-7/+2
Since our irq handler has been called, it is granted, that the reason was either PLUGINT, or UNPLUGINT. The INTID register has been checked in the MFD part of twl6040 driver (twl6040-irq.c). We have no reason to read from chip again here. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-22ASoC/MFD: twl6040: Combine bit definitions for Headset control registersPeter Ujfalusi1-1/+1
Use one set of defines for the HS bits, since they are identical in both control register. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-22ASoC: twl6040/sdp4430: Change legacy DAI namePeter Ujfalusi1-1/+1
Change the legacy DAI name from "twl6040-hifi" to "twl6040-legacy" to be more intuitive. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-22ASoC: twl6040: Support for AUX L/R outputPeter Ujfalusi1-0/+18
AUX L/R outputs can be driver from the Handsfree PGA output. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-22ASoC: twl6040: Use consistent names for Headset pathPeter Ujfalusi1-12/+12
Use "Headset XYZ" for user visible controls, while the internal DAPM widgets can use "HS XYZ". In this way we can group the Headset related controls in UI (alsamixer for example). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-22ASoC: twl6040: Use consistent names for Handsfree pathPeter Ujfalusi1-16/+16
Use "Handsfree XYZ" for user visible controls, while the internal DAPM widgets can use "HF XYZ". In this way we can group the Handsfree related controls in UI (alsamixer for example). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-22ASoC: twl6040: Earphone path correctionPeter Ujfalusi1-5/+12
Fix the DAPM routing for the earphone path. Convert the DAPM_SWITCH_E to DAPM_OUT_DRV_E, so we can have correct power up, and down sequence for EP. Introduce mute control (Earphone Playback Switch) for users to enable/disable the EP path. Note: the EP does not have it's own dedicated DAC. EP is connected to HSL DAC. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-22ASoC: twl6040: Introduce SW only shadow registerPeter Ujfalusi1-3/+16
Software only shadow register to be used by the driver. For example Earpiece path will need this shadow register. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-25 09:00:36 +0300