summaryrefslogtreecommitdiff
path: root/sound/soc/fsl/fsl_sai.c
AgeCommit message (Collapse)AuthorFilesLines
2024-01-22ASoC: fsl_sai: Add support for i.MX95 platformChancel Liu1-0/+13
Add compatible string and specific soc data to support SAI on i.MX95 platform. Signed-off-by: Chancel Liu <chancel.liu@nxp.com> Link: https://msgid.link/r/20240112054331.3244104-3-chancel.liu@nxp.com Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2023-12-19ASoC: fsl_sai: Fix channel swap issue on i.MX8MPShengjiu Wang1-0/+3
When flag mclk_with_tere and mclk_direction_output enabled, The SAI transmitter or receiver will be enabled in very early stage, that if FSL_SAI_xMR is set by previous case, for example previous case is one channel, current case is two channels, then current case started with wrong xMR in the beginning, then channel swap happen. The patch is to clear xMR in hw_free() to avoid such channel swap issue. Fixes: 3e4a82612998 ("ASoC: fsl_sai: MCLK bind with TX/RX enable bit") Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Link: https://msgid.link/r/1702953057-4499-1-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-11-20ASoC: fsl_sai: Fix no frame sync clock issue on i.MX8MPShengjiu Wang1-0/+21
On i.MX8MP, when the TERE and FSD_MSTR enabled before configuring the word width, there will be no frame sync clock issue, because old word width impact the generation of frame sync. TERE enabled earlier only for i.MX8MP case for the hardware limitation, So need to disable FSD_MSTR before configuring word width, then enable FSD_MSTR bit for this specific case. Fixes: 3e4a82612998 ("ASoC: fsl_sai: MCLK bind with TX/RX enable bit") Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1700474735-3863-1-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-10-09ASoC: Explicitly include correct DT includesRob Herring1-2/+1
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it was merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev> # for at91 Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20231006-dt-asoc-header-cleanups-v3-1-13a4f0f7fee6@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2023-09-25ASoC: fsl_sai: Don't disable bitclock for i.MX8MPShengjiu Wang1-2/+7
On i.MX8MP, the BCE and TERE bit are binding with mclk enablement, if BCE and TERE are cleared the MCLK also be disabled on output pin, that cause the external codec (wm8960) in wrong state. Codec (wm8960) is using the mclk to generate PLL clock, if mclk is disabled before disabling PLL, the codec (wm8960) won't generate bclk and frameclk when sysclk switch to MCLK source in next test case. The test case: $aplay -r44100 test1.wav (PLL source) $aplay -r48000 test2.wav (MCLK source) aplay: pcm_write:2127: write error: Input/output error Fixes: 269f399dc19f ("ASoC: fsl_sai: Disable bit clock with transmitter") Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1695116533-23287-1-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-14ASoC: fsl: merge DAI call back functions into opsKuninori Morimoto1-12/+12
ALSA SoC merges DAI call backs into .ops. This patch merge these into one. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87jzu5b0ue.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-07-17ASoC: fsl_sai: Disable bit clock with transmitterMatus Gajdos1-1/+1
Otherwise bit clock remains running writing invalid data to the DAC. Signed-off-by: Matus Gajdos <matuszpd@gmail.com> Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230712124934.32232-1-matuszpd@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-07-10ASoC: fsl_sai: Revert "ASoC: fsl_sai: Enable MCTL_MCLK_EN bit for master mode"Fabio Estevam1-6/+0
This reverts commit ff87d619ac180444db297f043962a5c325ded47b. Andreas reports that on an i.MX8MP-based system where MCLK needs to be used as an input, the MCLK pin is actually an output, despite not having the 'fsl,sai-mclk-direction-output' property present in the devicetree. This is caused by commit ff87d619ac18 ("ASoC: fsl_sai: Enable MCTL_MCLK_EN bit for master mode") that sets FSL_SAI_MCTL_MCLK_EN unconditionally for imx8mm/8mn/8mp/93, causing the MCLK to always be configured as output. FSL_SAI_MCTL_MCLK_EN corresponds to the MOE (MCLK Output Enable) bit of register MCR and the drivers sets it when the 'fsl,sai-mclk-direction-output' devicetree property is present. Revert the commit to allow SAI to use MCLK as input as well. Cc: stable@vger.kernel.org Fixes: ff87d619ac18 ("ASoC: fsl_sai: Enable MCTL_MCLK_EN bit for master mode") Reported-by: Andreas Henriksson <andreas@fatal.se> Signed-off-by: Fabio Estevam <festevam@denx.de> Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com> Link: https://lore.kernel.org/r/20230706221827.1938990-1-festevam@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-06-16ASoC: Merge fixes due to dependenciesMark Brown1-2/+9
So we can apply the tlv320aic3xxx DT conversion.
2023-06-02ASoC: fsl_sai: Enable BCI bit if SAI works on synchronous mode with BYP assertedChancel Liu1-2/+9
There's an issue on SAI synchronous mode that TX/RX side can't get BCLK from RX/TX it sync with if BYP bit is asserted. It's a workaround to fix it that enable SION of IOMUX pad control and assert BCI. For example if TX sync with RX which means both TX and RX are using clk form RX and BYP=1. TX can get BCLK only if the following two conditions are valid: 1. SION of RX BCLK IOMUX pad is set to 1 2. BCI of TX is set to 1 Signed-off-by: Chancel Liu <chancel.liu@nxp.com> Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com> Link: https://lore.kernel.org/r/20230530103012.3448838-1-chancel.liu@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-05-08ASoC: fsl_sai: MCLK bind with TX/RX enable bitShengjiu Wang1-3/+21
On i.MX8MP, the sai MCLK is bound with TX/RX enable bit, which means the TX/RE enable bit need to be enabled then MCLK can be output on PAD. Some codec (for example: WM8962) needs the MCLK output earlier, otherwise there will be issue for codec configuration. Add new soc data "mclk_with_tere" for this platform and enable the MCLK output in startup stage. As "mclk_with_tere" only applied to i.MX8MP, currently The soc data is shared with i.MX8MN, so need to add an i.MX8MN own soc data with "mclk_with_tere" disabled. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com Link: https://lore.kernel.org/r/1683273322-2525-1-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org
2023-04-27Merge tag 'sound-6.4-rc1' of ↵Linus Torvalds1-10/+8
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "At this time, it's an interesting mixture of changes for both old and new stuff. Majority of changes are about ASoC (lots of systematic changes for converting remove callbacks to void, and cleanups), while we got the fixes and the enhancements of very old PCI cards, too. Here are some highlights: ALSA/ASoC Core: - Continued effort of more ASoC core cleanups - Minor improvements for XRUN handling in indirect PCM helpers - Code refactoring of PCM core code ASoC: - Continued feature and simplification work on SOF, including addition of a no-DSP mode for bringup, HDA MLink and extensions to the IPC4 protocol - Hibernation support for CS35L45 - More DT binding conversions - Support for Cirrus Logic CS35L56, Freescale QMC, Maxim MAX98363, nVidia systems with MAX9809x and RT5631, Realtek RT712, Renesas R-Car Gen4, Rockchip RK3588 and TI TAS5733 ALSA: - Lots of works for legacy emu10k1 and ymfpci PCI drivers - PCM kselftest fixes and enhancements" * tag 'sound-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (586 commits) ALSA: emu10k1: use high-level I/O in set_filterQ() ALSA: emu10k1: use high-level I/O functions also during init ALSA: emu10k1: fix error handling in snd_audigy_i2c_volume_put() ALSA: emu10k1: don't stop DSP in _snd_emu10k1_{,audigy_}init_efx() ALSA: emu10k1: fix SNDRV_EMU10K1_IOCTL_SINGLE_STEP ALSA: emu10k1: skip Sound Blaster-specific hacks for E-MU cards ALSA: emu10k1: fixup DSP defines ALSA: emu10k1: pull in some register definitions from kX-project ALSA: emu10k1: remove some bogus defines ALSA: emu10k1: eliminate some unused defines ALSA: emu10k1: fix lineup of EMU_HANA_* defines ALSA: emu10k1: comment updates ALSA: emu10k1: fix snd_emu1010_fpga_read() input masking for rev2 cards ALSA: emu10k1: remove unused emu->pcm_playback_efx_substream field ALSA: emu10k1: remove unused `resume` parameter from snd_emu10k1_init() ALSA: emu10k1: minor optimizations ALSA: emu10k1: remove remaining cruft from snd_emu10k1_emu1010_init() ALSA: emu10k1: remove apparently pointless EMU_HANA_OPTION_CARDS reads ALSA: emu10k1: remove apparently pointless FPGA reads ALSA: emu10k1: stop doing weird things with HCFG in snd_emu10k1_emu1010_init() ...
2023-04-19ASoC: fsl_sai: Fix pins setting for i.MX8QM platformChancel Liu1-1/+1
SAI on i.MX8QM platform supports the data lines up to 4. So the pins setting should be corrected to 4. Fixes: eba0f0077519 ("ASoC: fsl_sai: Enable combine mode soft") Signed-off-by: Chancel Liu <chancel.liu@nxp.com> Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com> Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com> Link: https://lore.kernel.org/r/20230418094259.4150771-1-chancel.liu@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-03-20ASoC: fsl: fsl_sai: Convert to platform remove callback returning voidUwe Kleine-König1-4/+2
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20230315150745.67084-73-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
2023-03-11ASoC: Use of_property_read_bool() for boolean propertiesRob Herring1-6/+6
It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. Convert reading boolean properties to to of_property_read_bool(). Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230310144733.1546413-1-robh@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2023-02-16Merge tag 'asoc-v6.3' of ↵Takashi Iwai1-1/+5
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next ASoC: Updates for v6.3 There's been quite a lot of activity this release, but not really one big feature - lots of new devices, plus a lot of cleanup and modernisation work spread throughout the subsystem: - More factoring out of common operations into helper functions by Morimoto-san. - DT schema conversons and stylistic nits. - Continued work on building out the new SOF IPC4 scheme. - Support for Awinc AT88395, Infineon PEB2466, Iron Device SMA1303, Mediatek MT8188, Realtek RT712, Renesas IDT821034, Samsung/Tesla FSD SoC I2S, and TI TAS5720A-Q1.
2023-02-07ASoC: fsl_sai: fix getting version from VERIDShengjiu Wang1-0/+1
The version information is at the bit31 ~ bit16 in the VERID register, so need to right shift 16bit to get it, otherwise the result of comparison "sai->verid.version >= 0x0301" is wrong. Fixes: 99c1e74f25d4 ("ASoC: fsl_sai: store full version instead of major/minor") Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/1675760664-25193-1-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-01-16ASoC: fsl_sai: Use dev_err_probeAlexander Stein1-1/+4
This helps figuring out why the device probe is deferred, e.g. missing FSL_EDMA driver. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com> Link: https://lore.kernel.org/r/20230111161144.3275546-1-alexander.stein@ew.tq-group.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-01-16ASoC: fsl_sai: initialize is_dsp_mode flagShengjiu Wang1-0/+1
Initialize is_dsp_mode flag in the beginning of function fsl_sai_set_dai_fmt_tr(). When the DAIFMT is DAIFMT_DSP_B the first time, is_dsp_mode is true, then the second time DAIFMT is DAIFMT_I2S, is_dsp_mode still true, which is a wrong state. So need to initialize is_dsp_mode flag every time. Fixes: a3f7dcc9cc03 ("ASoC: fsl-sai: Add SND_SOC_DAIFMT_DSP_A/B support.") Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com> Link: https://lore.kernel.org/r/1673852874-32200-1-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-11-29ASoC: Merge up fixesMark Brown1-1/+1
Merge the fixes branch up so we can apply further AMD work.
2022-10-28ASoC: fsl_asrc fsl_esai fsl_sai: allow CONFIG_PM=NMaarten Zanders1-1/+1
When CONFIG_PM=N, pm_runtime_put_sync() returns -ENOSYS which breaks the probe function of these drivers. Other users of pm_runtime_put_sync() typically don't check the return value. In order to keep the program flow as intended, check for -ENOSYS. This commit is similar to commit 0434d3f (omap-mailbox.c). Fixes: cab04ab5900f ("ASoC: fsl_asrc: Don't use devm_regmap_init_mmio_clk") Fixes: 203773e39347 ("ASoC: fsl_esai: Don't use devm_regmap_init_mmio_clk") Fixes: 2277e7e36b4b ("ASoC: fsl_sai: Don't use devm_regmap_init_mmio_clk") Signed-off-by: Maarten Zanders <maarten.zanders@mind.be> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Link: https://lore.kernel.org/r/20221028141129.100702-1-maarten.zanders@mind.be Signed-off-by: Mark Brown <broonie@kernel.org>
2022-10-28ASoC: fsl_sai: Specify the maxburst to 8 on i.MX93 platformChancel Liu1-4/+7
There is a limit to eDMA AXI on i.MX93. Only TCD that has NBYTES in a multiple of 8bytes can enable scatter-gather. NBYTES is calculated by bus width times maxburst. On i.MX93 platform the value of maxburst is specified to 8. It makes sure that NBYTES is a multiple of 8bytes. Signed-off-by: Chancel Liu <chancel.liu@nxp.com> Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Link: https://lore.kernel.org/r/20221027060311.2549711-4-chancel.liu@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-10-28ASoC: fsl_sai: Add support for i.MX93 platformChancel Liu1-0/+12
Add compatible string and specific soc data to support SAI on i.MX93 platform. Signed-off-by: Chancel Liu <chancel.liu@nxp.com> Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Link: https://lore.kernel.org/r/20221027060311.2549711-3-chancel.liu@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-08-23ASoC: fsl_sai: Update slots number according to bclk_ratioShengjiu Wang1-3/+5
The bclk_ratio is set by .set_bclk_ratio API. bclk_ratio = slots * slot_width So if slots is not set by .set_tdm_slot, then it can be calculated by bclk_ratio. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1659681926-13493-1-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-08-23ASoC: fsl_sai: Add support multi fifo sdma scriptShengjiu Wang1-1/+36
With disabling combine mode, the multiple successive FIFO registers or non successive FIFO registers of SAI module can work with the sdma multi fifo script. This patch is to configure the necessary information to the SDMA engine driver for support multi fifo script. 'words_per_fifo' is the channels for each dataline 'n_fifos_src' and 'n_fifos_dst' are the fifo number 'stride_fifos_src' and 'stride_fifos_dst' are the stride between enable FIFOs 'maxburst' is the multiply of datalines Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1661218573-2154-1-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-08-17ASoC: fsl_sai: Remove unnecessary FIFO reset in ISRShengjiu Wang1-8/+2
The FIFO reset drops the words in the FIFO, which may cause channel swap when SAI module is running, especially when the DMA speed is low. So it is not good to do FIFO reset in ISR, then remove the operation. Fixes: e2681a1bf5ae ("ASoC: fsl_sai: Add isr to deal with error flag") Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1660713867-26921-1-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-08-16ASoC: fsl_sai: fix incorrect mclk number in error messagePieterjan Camerlynck1-1/+1
In commit c3ecef21c3f26 ("ASoC: fsl_sai: add sai master mode support") the loop was changed to start iterating from 1 instead of 0. The error message however was not updated, reporting the wrong clock to the user. Signed-off-by: Pieterjan Camerlynck <pieterjan.camerlynck@gmail.com> Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com> Link: https://lore.kernel.org/r/20220813083353.8959-1-pieterjan.camerlynck@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-21ASoC: fsl_sai: Don't use plain integer as NULL pointerShengjiu Wang1-1/+1
Fix sparse warning: sound/soc/fsl/fsl_sai.c:64:39: sparse: warning: Using plain integer as NULL pointer Fixes: b4ee8a913e61 ("ASoc: fsl_sai: Add pinctrl operation for PDM and DSD") Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1658399393-28777-2-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-05ASoC: fsl_sai: Add support for PLL switch at runtimeShengjiu Wang1-0/+38
i.MX8MQ/MN/MM/MP platforms typically have 2 AUDIO PLLs being configured to handle 8kHz and 11kHz series audio rates. The patch implements the functionality to select at runtime the appropriate AUDIO PLL as function of sysclk rate. Signed-off-by: Viorel Suman <viorel.suman@nxp.com> Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1656667961-1799-5-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-29ASoC: Refactor non_legacy_dai_naming flagMark Brown1-2/+3
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>: Historically, the legacy DAI naming scheme was applied to platform drivers and the newer scheme to CODEC drivers. During componentisation the core lost the knowledge of if a driver was a CODEC or platform, they were all now components. To continue to support the legacy naming on older platform drivers a flag was added to the snd_soc_component_driver structure, non_legacy_dai_naming, to indicate to use the new scheme and this was applied to all CODECs as part of the migration. However, a slight issue appears to be developing with respect to this flag being opt in for the non-legacy scheme, which presumably we want to be the primary scheme used. Many codec drivers appear to forget to include this flag: grep -l -r "snd_soc_component_driver" sound/soc/codecs/*.c | xargs grep -L "non_legacy_dai_naming" | wc 48 48 556 Whilst in many cases the configuration of the DAIs themselves will cause the core to apply the new scheme anyway, it would seem more sensible to change the flag to legacy_dai_naming making the new scheme opt out. This patch series migrates across to such a scheme.
2022-06-28Add PDM/DSD/dataline configuration supportMark Brown1-21/+239
Merge series from Shengjiu Wang <shengjiu.wang@nxp.com>: Support PDM format and DSD format. Add new dts property to configure dataline. The SAI has multiple successive FIFO registers, but in some use case the required dataline/FIFOs are not successive.
2022-06-27ASoC: fsl_sai: Configure dataline/FIFO information from dts propertyShengjiu Wang1-4/+157
The SAI has multiple successive FIFO registers, but in some use case the required dataline/FIFOs are not successive, so need get such information from dts property "fsl,dataline" fsl,dataline has 3 values for each configuration: first one means the type: I2S(1) or DSD(2), second one is dataline mask for 'rx', third one is dataline mask for 'tx'. Also set dma peripheral address and TRCE bits according to data lane. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by: Viorel Suman <viorel.suman@nxp.com> Link: https://lore.kernel.org/r/1655451877-16382-8-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-27ASoC: fsl_sai: Make res a member of struct fsl_saiShengjiu Wang1-4/+3
The resource info need to be accessed by hw_params() function for multi fifo case, the start address may be not the FIFO0. So move it to be a member of struct fsl_sai. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1655451877-16382-6-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-27ASoc: fsl_sai: Add pinctrl operation for PDM and DSDShengjiu Wang1-9/+61
With DSD format, the pinctrl is different compare with I2S format, because one dataline only has one channel data, and the codec always mux the LRCLK pin to DSD data line, and on i.MX8MQ the BCLK pin can route to codec on DSD case for the MCLK is too high. Add pinctrl operation that the pinctrl can be switched on runtime according to the I2S format or DSD format Signed-off-by: Viorel Suman <viorel.suman@nxp.com> Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1655451877-16382-5-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-27ASoC: fsl_sai: Add support for more sample ratesShengjiu Wang1-3/+4
Add support for more sample rates, because PDM format bitstream has higher sample rates. for example DSD512 format, the bit clock is 22.5792MHz, if the word width is U8_LE, then the max sample rate is 2822400. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1655451877-16382-4-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-27ASoC: fsl_sai: Add PDM daifmt supportShengjiu Wang1-2/+15
PDM format is used for 1-bit stream, so clear the FBT and SYWD, and the each dataline only has one channel data. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1655451877-16382-2-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-27ASoC: fsl: fsl_sai: use pm_runtime_resume_and_get()Pierre-Louis Bossart1-4/+2
Simplify the flow. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20220616220427.136036-8-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-27ASoC: fsl: Migrate to new style legacy DAI naming flagCharles Keepax1-1/+2
Change the legacy DAI naming flag from opting in to the new scheme (non_legacy_dai_naming), to opting out of it (legacy_dai_naming). These drivers appear to be on the CPU side of the DAI link and currently uses the legacy naming, so add the new flag. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220623125250.2355471-21-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-14ASoC: Merge fixesMark Brown1-0/+1
Required for more changes for the ops.
2022-06-09Specify clock provider directly to CPU DAIsMark Brown1-4/+4
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>: Currently the set_fmt callback always passes clock provider/consumer with respect to the CODEC. This made sense when the framework was directly broken down into platforms and CODECs. However, as things are now broken down into components which can be connected as either the CPU or CODEC side of a DAI link it simplifies things if each side of the link is just told if it is provider or consumer of the clocks. Making this change allows us to remove one of the last parts of the ASoC core that needs to know if a driver is a CODEC driver, where it flips the clock format specifier if a CODEC driver is used on the CPU side of a DAI link, as well as just being conceptually more consistent with componentisation. The basic idea of this patch chain is to change the set_fmt callback from specifying if the CODEC is provider/consumer into directly specifying if the component is provider/consumer. To do this we add some new defines, and then to preserve bisectability, the migration is done by adding a new callback, converting over all existing CPU side drivers, converting the core, and then finally reverting back to the old callback. Converting the platform drivers makes sense as the existing defines are from the perspective of the CODEC and there are more CODEC drivers than platform drivers. Obviously a fair amount of this patch chain I was only able to build test, so any testing that can be done would be greatly appreciated.
2022-06-08ASoC: fsl_sai: Enable MCTL_MCLK_EN bit for master modeShengjiu Wang1-0/+6
On i.MX8MM, the MCTL_MCLK_EN bit it is not only the gate for MCLK output to PAD, but also the gate bit between root clock and SAI module, So it is need to be enabled for master mode, otherwise there is no bclk generated. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1652963808-14515-1-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-06ASoC: fsl_sai: add error message in case of missing imx-pcm-dma supportMarco Felsch1-1/+4
If the imx-pcm-dma is required we need to have the module enabled. For all NXP/FSL sound cards using the ASoC architecture this is the case but in case of using the simple-audio-card sound card this isn't the case. In such case the driver probe fails silently and the card isn't available. It took a while to find the missing Kconfig. Make this easier for others by printing a error if this the module isn't available but required by the HW. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com> Link: https://lore.kernel.org/r/20220601092342.3328644-3-m.felsch@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-06ASoC: fsl_sai: use local device pointerMarco Felsch1-26/+27
Use a local variable to dereference the device pointer once and use the local variable in further calls. No functional changes. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com> Link: https://lore.kernel.org/r/20220601092342.3328644-1-m.felsch@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-06ASoC: fsl: Rename set_fmt_new back to set_fmtCharles Keepax1-1/+1
Now the core has been migrated across to the new direct clock specification we can move the drivers back to the normal set_fmt callback. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220519154318.2153729-36-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-06ASoC: fsl: Update to use set_fmt_new callbackCharles Keepax1-5/+5
As part of updating the core to directly tell drivers if they are clock provider or consumer update these CPU side drivers to use the new direct callback. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220519154318.2153729-9-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-06ASoC: fsl_sai: Add support for i.MX8MNShengjiu Wang1-0/+1
The SAI module on i.MX8MN is almost same as i.MX8MP, So reuse same soc data as i.MX8MP. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1653966123-28217-1-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-05-16ASoC: fsl_sai: Add support for i.MX8ULPShengjiu Wang1-1/+13
Add i.MX8ULP specific soc data, the max register is FSL_SAI_RTCAP the IP version is also 0x0301, So version can't be used for the condition of register FSL_SAI_MCTL setting. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/1652688372-10274-4-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-05-16ASoC: fsl_sai: Add support for i.MX8M PlusShengjiu Wang1-0/+12
Add i.MX8M Plus specific soc data, the max register is FSL_SAI_MDIV. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/1652688372-10274-3-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-05-16ASoC: fsl_sai: Add support for i.MX8MMShengjiu Wang1-0/+17
On i.MX8MM the max register is FSL_SAI_MCTL, which is different with previous platform, so add max_register in soc data to distinguish platforms. And add specific soc data for i.MX8MM Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/1652688372-10274-2-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-06ASoC: fsl_sai: fix 1:1 bclk:mclk ratio supportAhmad Fatoum1-1/+1
Refactoring in commit a50b7926d015 ("ASoC: fsl_sai: implement 1:1 bclk:mclk ratio support") led to the bypass never happening as (ratio = 1) was caught in the existing if (ratio & 1) continue; check. The correct check sequence instead is: - skip all ratios lower than one and higher than 512 - skip all odd ratios except for 1:1 - skip 1:1 ratio if and only if !support_1_1_ratio And for all others, calculate the appropriate divider. Adjust the code to facilitate this. Fixes: a50b7926d015 ("ASoC: fsl_sai: implement 1:1 bclk:mclk ratio support") Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Link: https://lore.kernel.org/r/20220405155731.745413-1-a.fatoum@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-15 16:11:42 +0300