summaryrefslogtreecommitdiff
path: root/sound/soc/pxa
AgeCommit message (Collapse)AuthorFilesLines
2018-07-20ASoC: pxa: remove clock divider and pll setup from zylonite and magicianDaniel Mack2-113/+2
The SSP DAI now handles the clocking setup itself, all it needs is the master clock frequency. Remove the code from Zylonite and Magician platforms. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-09ASoC: pxa: make SND_PXA_SOC_SSP depend on PLAT_PXAArnd Bergmann1-0/+1
For the moment, we can't enable CONFIG_SND_PXA_SOC_SSP unless we are building for ARM PXA or MMP: WARNING: unmet direct dependencies detected for PXA_SSP Depends on [n]: PLAT_PXA [=n] Selected by [y]: - SND_PXA_SOC_SSP [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] This adds an explicit dependency for it. Fixes: 0a94cf345740 ("ASoC: pxa: make SND_PXA2XX_SOC_I2S selectable") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-05ASoC: pxa-ssp: add support for an external clock in devicetreeDaniel Mack1-0/+25
Allow setting a clock called 'extclk' in the device of the ssp-dai device. If specified, this clock will be set to the mclk rate from the DAI's .set_sysclk() callback. The DAI will also configure itself to use that external clock. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-03ASoC: pxa-ssp: mark expected switch fall-throughGustavo A. R. Silva1-0/+1
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-02ASoC: pxa-ssp: remove .set_pll() and .set_clkdiv() callbacksDaniel Mack1-73/+73
The .set_pll() and .set_clkdiv() callbacks are considered legacy and should not be used anymore. In order to support PXA boards on DT platforms, remove them and let the code figure out the correct dividers and PLL base frequencies itself. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-02ASoC: pxa: select SND_PXA2XX_LIB for drivers that depend on itDaniel Mack1-0/+3
Commit d767d3ce5c48b ("ASoC: pxa: provide PCM ops for ssp, i2s and ac97 components") created a build-time dependency to SND_PXA2XX_LIB but missed to reflect that in Kconfig. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-29ASoC: pxa: make SND_PXA2XX_SOC_I2S selectableDaniel Mack1-1/+1
Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-29ASoC: pxa: remove bindings from pxa2xx-pcmDaniel Mack1-9/+0
This platform is no longer needed on DT boards, so let's remove them to avoid confusion. DT bindings should use the CPU DAIs (I2S/SSP/AC97) directly. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-29ASoC: pxa: provide PCM ops for ssp, i2s and ac97 componentsDaniel Mack3-0/+9
Now that the functions are now available through pxa2xx-lib, hook them up to pxa-sspi, pxa-ac97 and pxa-i2s. This allows DT platforms to use the DAIs without a platform driver. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-29ASoC: pxa: move some functions to pxa2xx-libDaniel Mack1-55/+0
To get rid of some intermediate platform layers, move pxa2xx_soc_pcm_new() and pxa2xx_pcm_ops in pxa2xx-lib. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-29ASoC: pxa: clean up function names in pxa2xx-libDaniel Mack1-14/+7
Clean up the namespace a bit and drop the __ prefix of all functions exported by pxa2xx-lib. This improves the readability of the code. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-29ASoC: fold pxa2xx-pcm into its only user, pxa2xx-ac97Daniel Mack2-3/+0
Now that the PXA SSP bits are ported over to generic DMA, the pxa2xx-pcm code only has a single user left. This patch folds the remaining bits into its only user and removes the unnecessary glue layer along with its header file. The include dependency to linux/dma/pxa-dma.h is also gone now. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-29ASoC: pxa: remove the dmaengine compat needRobert Jarzmik2-31/+7
As the pxa architecture switched towards the dmaengine slave map, the old compatibility mechanism to acquire the dma requestor line number and priority are not needed anymore. This patch simplifies the dma resource acquisition, using the more generic function dma_request_slave_channel(). Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-25Merge tag 'pxa-for-4.19-dma_slave_map' ofMark Brown1-3/+2
https://github.com/rjarzmik/linux into asoc-4.19 for ac'97 deps
2018-06-18ARM: pxa: change SSP DMA channels allocationRobert Jarzmik1-3/+2
Now the dma_slave_map is available for PXA architecture, switch the SSP device to it. This specifically means that : - for platform data based machines, the DMA requestor channels are extracted from the slave map, where pxa-ssp-dai.<N> is a 1-1 match to ssp.<N>, and the channels are either "rx" or "tx". - for device tree platforms, the dma node should be hooked into the pxa2xx-ac97 or pxa-ssp-dai node. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Daniel Mack <daniel@zonque.org>
2018-06-18ASoC: pxa: add devicetree supportRobert Jarzmik1-0/+12
Add the devicetree support, so that the driver can be used in a devictree platform. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-13treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook1-2/+2
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-22ASoC: pxa-ssp: simplify pxa_ssp_set_dai_sysclk()Daniel Mack1-4/+2
There's no need to read the register again prior to writing it, we did that in the beginning of the function. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-05-22ASoC: pxa-ssp: allow more flexible setup orderDaniel Mack1-20/+62
The pxa-ssp driver currently assumes that .set_fmt() is called before .set_clkdiv(), .set_pll() etc. Commit a8bd0ee558714 ("ASoC: raumfeld: Use static DAI format setup") broke support for Raumfeld hardware (and possible other PXA based ones) because it effectively changed the order of these calls. Also, as the call to .set_fmt() is now done at probe time, the port clock is not yet enabled. To fix this, strip all hardware register access code from the .set_fmt() callback and memorize the desired value, so we can use it from the .hw_params() callback. Also make the .set_fmt() callback less destructive by reading all registers that it writes to in the beginning and only masking out the bits that it possibly fiddles with. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-18ASoC: Remove depends on HAS_DMA in case of platform dependencyGeert Uytterhoeven1-1/+0
Remove dependencies on HAS_DMA where a Kconfig symbol depends on another symbol that implies HAS_DMA, and, optionally, on "|| COMPILE_TEST". In most cases this other symbol is an architecture or platform specific symbol, or PCI. Generic symbols and drivers without platform dependencies keep their dependencies on HAS_DMA, to prevent compiling subsystems or drivers that cannot work anyway. This simplifies the dependencies, and allows to improve compile-testing. Note: - The various SND_SOC_LPASS_* symbols had to loose their dependencies on HAS_DMA, as they are selected by SND_SOC_STORM and/or SND_SOC_APQ8016_SBC. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Mark Brown <broonie@kernel.org> Acked-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-28Merge remote-tracking branches 'asoc/topic/pistachio', 'asoc/topic/pxa', ↵Mark Brown1-1/+0
'asoc/topic/rsnd', 'asoc/topic/rt274' and 'asoc/topic/rt286' into asoc-next
2018-03-28Merge remote-tracking branches 'asoc/topic/88pm860x', 'asoc/topic/ab8500', ↵Mark Brown2-18/+18
'asoc/topic/ac97', 'asoc/topic/ad1836' and 'asoc/topic/ad193x' into asoc-next
2018-02-26ASoC: pxa: remove duplicated bit-wise or of SNDRV_PCM_FMTBIT_S24_LEColin Ian King1-1/+0
Bit pattern SNDRV_PCM_FMTBIT_S24_LE is being bit-wise or'd twice; remove the redundant 2nd SNDRV_PCM_FMTBIT_S24_LE Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-02-19ASoC: pxa/mioa701_wm9713: replace codec to componentKuninori Morimoto1-15/+15
Now codec can be replaced to component, let's do it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-02-12ASoC: pxa: pxa2xx: replace platform to componentKuninori Morimoto1-2/+3
Now platform can be replaced to component, let's do it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-02-12ASoC: pxa: mmp: replace platform to componentKuninori Morimoto1-3/+8
Now platform can be replaced to component, let's do it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-02-12ASoC: 88pm860x: replace codec to componentKuninori Morimoto1-3/+3
Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-11Merge remote-tracking branches 'asoc/topic/ac97', 'asoc/topic/ac97-mfd', ↵Mark Brown1-6/+26
'asoc/topic/amd' and 'asoc/topic/arizona-mfd' into asoc-next
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-04ASoC: arm: make pxa2xx-ac97-lib ac97 codec agnosticRobert Jarzmik1-6/+26
All pxa library functions don't use the input parameters for nothing but slot number. This simplifies their prototypes, and makes them usable by both the legacy ac97 bus and the new ac97 bus. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-09-01Merge remote-tracking branches 'asoc/topic/omap', 'asoc/topic/psc-ac97' and ↵Mark Brown3-5/+5
'asoc/topic/pxa' into asoc-next
2017-09-01Merge remote-tracking branches 'asoc/topic/hisi', 'asoc/topic/img', ↵Mark Brown1-8/+0
'asoc/topic/jack' and 'asoc/topic/jz4740' into asoc-next
2017-08-22ASoC: pxa: Remove superfluous snd_soc_jack_free_gpios() callTakashi Iwai1-8/+0
Since jack gpios are managed via devres, we don't have to call snd_jack_free_gpios() at release any longer. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-14ASoC: pxa: constify snd_pcm_ops structuresArvind Yadav2-2/+2
snd_pcm_ops are not supposed to change at runtime. All functions working with snd_pcm_ops provided by <sound/soc.h> work with const snd_pcm_ops. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-14ASoC: pxa: make snd_soc_platform_driver constBhumika Goyal2-2/+2
Make these const as they are only passed as the 2nd argument to the function devm_snd_soc_register_platform, which is of type const. Done using Coccinelle. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-07-17ASoC: mmp-sspa: constify snd_soc_dai_ops structureGustavo A. R. Silva1-1/+1
This structure is only stored in the ops field of a snd_soc_dai_driver structure. That field is declared const, so snd_soc_dai_ops structures that have this property can be declared as const also. Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-07-10ASoC: pxa: SND_PXA2XX_SOC should depend on HAS_DMAGeert Uytterhoeven1-0/+1
If NO_DMA=y: ERROR: "bad_dma_ops" [sound/soc/pxa/snd-soc-pxa2xx.ko] undefined! ERROR: "bad_dma_ops" [sound/arm/snd-pxa2xx-lib.ko] undefined! ERROR: "dma_common_mmap" [sound/arm/snd-pxa2xx-lib.ko] undefined! Add a dependency on HAS_DMA to fix this. Fixes: 73d7ee2e831f106c ("ASoC: pxa: add COMPILE_TEST on SND_PXA2XX_SOC") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-06-21ASoC: pxa: add COMPILE_TEST on SND_PXA2XX_SOCKuninori Morimoto1-1/+1
It doesn't use asm header. We can add COMPILE_TEST Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-15ASoC: pxa: constify snd_soc_ops structuresBhumika Goyal11-12/+12
Declare snd_soc_ops structures as const as they are only stored in the ops field of a snd_soc_dai_link structure. This field is of type const, so snd_soc_ops structures having this property can be made const too. The .o files did not compile for all the changed .c files. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-07ASoC: pxa: Add space around '='Codrut Grosu4-4/+4
This was reported by checkpatch.pl Signed-off-by: Codrut Grosu <codrut.cristian.grosu@gmail.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-07ASoC: pxa-ssp: Line up *s in block commentsCodrut Grosu1-7/+7
This was reported by checkpatch.pl Signed-off-by: Codrut Grosu <codrut.cristian.grosu@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-07ASoC: pxa: Remove unneeded return statement in void functionCodrut Grosu2-2/+0
This was reported by checkpatch.pl Signed-off-by: Codrut Grosu <codrut.cristian.grosu@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-07ASoC: pxa: Remove spaces before tabsCodrut Grosu2-4/+4
This was reported by checkpatch.pl Signed-off-by: Codrut Grosu <codrut.cristian.grosu@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-07ASoC: pxa: Add space around ':' and '('Codrut Grosu2-2/+2
This was reported by checkpatch.pl Signed-off-by: Codrut Grosu <codrut.cristian.grosu@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-07ASoC: pxa: The open brace is placed with the previous lineCodrut Grosu1-4/+2
This was reported by checkpatch.pl Signed-off-by: Codrut Grosu <codrut.cristian.grosu@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-07ASoC: pxa: Remove unneeded else after return statementCodrut Grosu1-3/+2
This was reported by checkpatch.pl Signed-off-by: Codrut Grosu <codrut.cristian.grosu@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-07ASoC: pxa: Remove space before semicolonCodrut Grosu2-4/+4
This was reported by checkpatch.pl Signed-off-by: Codrut Grosu <codrut.cristian.grosu@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-07ASoC: pxa-ssp: Added blank line after declarationsCodrut Grosu1-0/+1
This was reported by checkpatch.pl Signed-off-by: Codrut Grosu <codrut.cristian.grosu@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-05ASoC: pxa2xx-ac97: Remove unused DAI ID definesLars-Peter Clausen10-34/+0
The DAI ID defines are back from the time when DAIs were referenced by a numerical ID. These days a string is used instead and the defines are unused. The last user of these defines was removed in commit f0fba2ad1b6b ("ASoC: multi-component - ASoC Multi-Component Support"). So remove the defines as well. This also means the pxa2xx-ac97.h file no longer has any content and can be removed. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> (for mioa701_wm9713) Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-12Merge remote-tracking branches 'asoc/topic/wm9712', 'asoc/topic/wm9713' and ↵Mark Brown4-4/+0
'asoc/topic/zte' into asoc-next