| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"It was a calm development cycle. There were an ALSA core extension for
subformat PCM bits and a few ASoC core changes to support N:M
mappings, while the most of remaining changes are driver-specific.
Core:
- API extensions for properly limiting PCM format bits via subformat
- Enhanced support for N:M CPU:CODEC mappings in the core and in
audio-graph-card2
ASoC:
- Lots of SOF updates: fallback support to older IPC versions,
notification on control changes with IPC4. Also supports for ACPI
parse for the ES83xx driver that reduces quirks.
- Device tree support for describing parts of the card which can be
active over suspend (for very low power playback or wake word use
cases)
- Support for more AMD and Intel systems, NXP i.MX8m MICFIL, Qualcomm
SM8250, SM8550, SM8650 and X1E80100
- Drop of Freescale MPC8610 code that is no longer supported
HD-audio:
- More CS35L41 codec extensions for Dell, HP and Lenovo models
- TAS2781 codec extensions for Lenovo and co
- New PCM subformat supports
Others:
- More enhancement for Scarlett2 USB mixer support
- Various kselftest fixes"
* tag 'sound-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (337 commits)
kselftest/alsa - conf: Stringify the printed errno in sysfs_get()
kselftest/alsa - mixer-test: Fix the print format specifier warning
kselftest/alsa - mixer-test: Fix the print format specifier warning
kselftest/alsa - mixer-test: fix the number of parameters to ksft_exit_fail_msg()
ALSA: hda/tas2781: annotate calibration data endianness
ALSA: hda/realtek: Fix mute and mic-mute LEDs for HP Envy X360 13-ay0xxx
ALSA: hda/conexant: Fix headset auto detect fail in cx8070 and SN6140
ALSA: ac97: fix build regression
ALSA: hda: cs35l41: Support more HP models without _DSD
ALSA: hda/tas2781: add fixup for Lenovo 14ARB7
ALSA: hda/tas2781: add TAS2563 support for 14ARB7
ALSA: hda/tas2781: add configurable global i2c address
ALSA: hda/tas2781: add ptrs to calibration functions
ALSA: hda: Add driver properties for cs35l41 for Lenovo Legion Slim 7 Gen 8 serie
ALSA: hda/realtek: enable SND_PCI_QUIRK for Lenovo Legion Slim 7 Gen 8 (2023) serie
ALSA: hda/tas2781: configure the amp after firmware load
ALSA: mark all struct bus_type as const
ASoC: pxa: sspa: Don't select SND_ARM
ASoC: rt5663: cancel the work when system suspends
ALSA: scarlett2: Add PCM Input Switch for Solo Gen 4
...
|
|
Pull drm updates from Dave Airlie:
"This contains two major new drivers:
- imagination is a first driver for Imagination Technologies devices,
it only covers very specific devices, but there is hope to grow it
- xe is a reboot of the i915 GPU (shares display) side using a more
upstream focused development model, and trying to maximise code
sharing. It's not enabled for any hw by default, and will hopefully
get switched on for Intel's Lunarlake.
This also drops a bunch of the old UMS ioctls. It's been dead long
enough.
amdgpu has a bunch of new color management code that is being used in
the Steam Deck.
amdgpu also has a new ACPI WBRF interaction to help avoid radio
interference.
Otherwise it's the usual lots of changes in lots of places.
Detailed summary:
new drivers:
- imagination - new driver for Imagination Technologies GPU
- xe - new driver for Intel GPUs using core drm concepts
core:
- add CLOSE_FB ioctl
- remove old UMS ioctls
- increase max objects to accomodate AMD color mgmt
encoder:
- create per-encoder debugfs directory
edid:
- split out drm_eld
- SAD helpers
- drop edid_firmware module parameter
format-helper:
- cache format conversion buffers
sched:
- move from kthread to workqueue
- rename some internals
- implement dynamic job-flow control
gpuvm:
- provide more features to handle GEM objects
client:
- don't acquire module reference
displayport:
- add mst path property documentation
fdinfo:
- alignment fix
dma-buf:
- add fence timestamp helper
- add fence deadline support
bridge:
- transparent aux-bridge for DP/USB-C
- lt8912b: add suspend/resume support and power regulator support
panel:
- edp: AUO B116XTN02, BOE NT116WHM-N21,836X2, NV116WHM-N49
- chromebook panel support
- elida-kd35t133: rework pm
- powkiddy RK2023 panel
- himax-hx8394: drop prepare/unprepare and shutdown logic
- BOE BP101WX1-100, Powkiddy X55, Ampire AM8001280G
- Evervision VGG644804, SDC ATNA45AF01
- nv3052c: register docs, init sequence fixes, fascontek FS035VG158
- st7701: Anbernic RG-ARC support
- r63353 panel controller
- Ilitek ILI9805 panel controller
- AUO G156HAN04.0
simplefb:
- support memory regions
- support power domains
amdgpu:
- add new 64-bit sequence number infrastructure
- add AMD specific color management
- ACPI WBRF support for RF interference handling
- GPUVM updates
- RAS updates
- DCN 3.5 updates
- Rework PCIe link speed handling
- Document GPU reset types
- DMUB fixes
- eDP fixes
- NBIO 7.9/7.11 updates
- SubVP updates
- XGMI PCIe state dumping for aqua vanjaram
- GFX11 golden register updates
- enable tunnelling on high pri compute
amdkfd:
- Migrate TLB flushing logic to amdgpu
- Trap handler fixes
- Fix restore workers handling on suspend/resume
- Fix possible memory leak in pqm_uninit()
- support import/export of dma-bufs using GEM handles
radeon:
- fix possible overflows in command buffer checking
- check for errors in ring_lock
i915:
- reorg display code for reuse in xe driver
- fdinfo memory stats printing
- DP MST bandwidth mgmt improvements
- DP panel replay enabling
- MTL C20 phy state verification
- MTL DP DSC fractional bpp support
- Audio fastset support
- use dma_fence interfaces instead of i915_sw_fence
- Separate gem and display code
- AUX register macro refactoring
- Separate display module/device parameters
- Move display capabilities debugfs under display
- Makefile cleanups
- Register cleanups
- Move display lock inits under display/
- VLV/CHV DPIO PHY register and interface refactoring
- DSI VBT sequence refactoring
- C10/C20 PHY PLL hardware readout
- DPLL code cleanups
- Cleanup PXP plane protection checks
- Improve display debug msgs
- PSR selective fetch fixes/improvements
- DP MST fixes
- Xe2LPD FBC restrictions removed
- DGFX uses direct VBT pin mapping
- more MTL WAs
- fix MTL eDP bug
- eliminate use of kmap_atomic
habanalabs:
- sysfs entry to identify a device minor id with debugfs path
- sysfs entry to expose device module id
- add signed device info retrieval through INFO ioctl
- add Gaudi2C device support
- pcie reset prepare/done hooks
msm:
- Add support for SDM670, SM8650
- Handle the CFG interconnect to fix the obscure hangs / timeouts
- Kconfig fix for QMP dependency
- use managed allocators
- DPU: SDM670, SM8650 support
- DPU: Enable SmartDMA on SM8350 and SM8450
- DP: enable runtime PM support
- GPU: add metadata UAPI
- GPU: move devcoredumps to GPU device
- GPU: convert to drm_exec
ivpu:
- update FW API
- new debugfs file
- a new NOP job submission test mode
- improve suspend/resume
- PM improvements
- MMU PT optimizations
- firmware profile frequency support
- support for uncached buffers
- switch to gem shmem helpers
- replace kthread with threaded irqs
rockchip:
- rk3066_hdmi: convert to atomic
- vop2: support nv20 and nv30
- rk3588 support
mediatek:
- use devm_platform_ioremap_resource
- stop using iommu_present
- MT8188 VDOSYS1 display support
panfrost:
- PM improvements
- improve interrupt handling as poweroff
qaic:
- allow to run with single MSI
- support host/device time sync
- switch to persistent DRM devices
exynos:
- fix potential error pointer dereference
- fix wrong error checking
- add missing call to drm_atomic_helper_shutdown
omapdrm:
- dma-fence lockdep annotation fix
tidss:
- dma-fence lockdep annotation fix
- support for AM62A7
v3d:
- BCM2712 - rpi5 support
- fdinfo + gputop support
- uapi for CPU job handling
virtio-gpu:
- add context debug name"
* tag 'drm-next-2024-01-10' of git://anongit.freedesktop.org/drm/drm: (2340 commits)
drm/amd/display: Allow z8/z10 from driver
drm/amd/display: fix bandwidth validation failure on DCN 2.1
drm/amdgpu: apply the RV2 system aperture fix to RN/CZN as well
drm/amd/display: Move fixpt_from_s3132 to amdgpu_dm
drm/amd/display: Fix recent checkpatch errors in amdgpu_dm
Revert "drm/amdkfd: Relocate TBA/TMA to opposite side of VM hole"
drm/amd/display: avoid stringop-overflow warnings for dp_decide_lane_settings()
drm/amd/display: Fix power_helpers.c codestyle
drm/amd/display: Fix hdcp_log.h codestyle
drm/amd/display: Fix hdcp2_execution.c codestyle
drm/amd/display: Fix hdcp_psp.h codestyle
drm/amd/display: Fix freesync.c codestyle
drm/amd/display: Fix hdcp_psp.c codestyle
drm/amd/display: Fix hdcp1_execution.c codestyle
drm/amd/pm/smu7: fix a memleak in smu7_hwmgr_backend_init
drm/amdkfd: Fix iterator used outside loop in 'kfd_add_peer_prop()'
drm/amdgpu: Drop 'fence' check in 'to_amdgpu_amdkfd_fence()'
drm/amdkfd: Confirm list is non-empty before utilizing list_first_entry in kfd_topology.c
drm/amdgpu: Fix '*fw' from request_firmware() not released in 'amdgpu_ucode_request()'
drm/amdgpu: Fix variable 'mca_funcs' dereferenced before NULL check in 'amdgpu_mca_smu_get_mca_entry()'
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"A new drivers/cache/ subsystem is added to contain drivers for
abstracting cache flush methods on riscv and potentially others, as
this is needed for handling non-coherent DMA but several SoCs require
nonstandard hardware methods for it.
op-tee gains support for asynchronous notification with FF-A, as well
as support for a system thread for executing in secure world.
The tee, reset, bus, memory and scmi subsystems have a couple of minor
updates.
Platform specific soc driver changes include:
- Samsung Exynos gains driver support for Google GS101 (Tensor G1)
across multiple subsystems
- Qualcomm Snapdragon gains support for SM8650 and X1E along with
added features for some other SoCs
- Mediatek adds support for "Smart Voltage Scaling" on MT8186 and
MT8195, and driver support for MT8188 along with some code
refactoring.
- Microchip Polarfire FPGA support for "Auto Update" of the FPGA
bitstream
- Apple M1 mailbox driver is rewritten into a SoC driver
- minor updates on amlogic, mvebu, ti, zynq, imx, renesas and
hisilicon"
* tag 'soc-drivers-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (189 commits)
memory: ti-emif-pm: Convert to platform remove callback returning void
memory: ti-aemif: Convert to platform remove callback returning void
memory: tegra210-emc: Convert to platform remove callback returning void
memory: tegra186-emc: Convert to platform remove callback returning void
memory: stm32-fmc2-ebi: Convert to platform remove callback returning void
memory: exynos5422-dmc: Convert to platform remove callback returning void
memory: renesas-rpc-if: Convert to platform remove callback returning void
memory: omap-gpmc: Convert to platform remove callback returning void
memory: mtk-smi: Convert to platform remove callback returning void
memory: jz4780-nemc: Convert to platform remove callback returning void
memory: fsl_ifc: Convert to platform remove callback returning void
memory: fsl-corenet-cf: Convert to platform remove callback returning void
memory: emif: Convert to platform remove callback returning void
memory: brcmstb_memc: Convert to platform remove callback returning void
memory: brcmstb_dpfe: Convert to platform remove callback returning void
soc: qcom: llcc: Fix LLCC_TRP_ATTR2_CFGn offset
firmware: qcom: qseecom: fix memory leaks in error paths
dt-bindings: clock: google,gs101: rename CMU_TOP gate defines
soc: qcom: llcc: Fix typo in kernel-doc
dt-bindings: soc: qcom,aoss-qmp: document the X1E80100 Always-On Subsystem side channel
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit updates from Shuah Khan:
- a new feature that adds APIs for managing devices introducing a set
of helper functions which allow devices (internally a struct
kunit_device) to be created and managed by KUnit.
These devices will be automatically unregistered on test exit. These
helpers can either use a user-provided struct device_driver, or have
one automatically created and managed by KUnit. In both cases, the
device lives on a new kunit_bus.
- changes to switch drm/tests to use kunit devices
- several fixes and enhancements to attribute feature
- changes to reorganize deferred action function introducing
KUNIT_DEFINE_ACTION_WRAPPER
- new feature adds ability to run tests after boot using debugfs
- fixes and enhancements to string-stream-test:
- parse ERR_PTR in string_stream_destroy()
- unchecked dereference in bug fix in debugfs_print_results()
- handling errors from alloc_string_stream()
- NULL-dereference bug fix in kunit_init_suite()
* tag 'linux_kselftest-kunit-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (27 commits)
kunit: Fix some comments which were mistakenly kerneldoc
kunit: Protect string comparisons against NULL
kunit: Add example of kunit_activate_static_stub() with pointer-to-function
kunit: Allow passing function pointer to kunit_activate_static_stub()
kunit: Fix NULL-dereference in kunit_init_suite() if suite->log is NULL
kunit: Reset test->priv after each param iteration
kunit: Add example for using test->priv
drm/tests: Switch to kunit devices
ASoC: topology: Replace fake root_device with kunit_device in tests
overflow: Replace fake root_device with kunit_device
fortify: test: Use kunit_device
kunit: Add APIs for managing devices
Documentation: Add debugfs docs with run after boot
kunit: add ability to run tests after boot using debugfs
kunit: add is_init test attribute
kunit: add example suite to test init suites
kunit: add KUNIT_INIT_TABLE to init linker section
kunit: move KUNIT_TABLE out of INIT_DATA
kunit: tool: add test for parsing attributes
kunit: tool: fix parsing of test attributes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"A moderately busy release for SPI, the main core update was the
merging of support for multiple chip selects, used in some flash
configurations. There were also big overhauls for the AXI SPI Engine
and PL022 drivers, plus some new device support for ST.
There's a few patches for other trees, API updates to allow the
multiple chip select support and one of the naming modernisations
touched a controller embedded in the USB code.
- Support for multiple chip selects.
- A big overhaul for the AXI SPI engine driver, modernising it and
adding a bunch of new features.
- Modernisation of the PL022 driver, fixing some issues with
submitting messages while in atomic context in the process.
- Many drivers were converted to use new APIs which avoid outdated
terminology for devices and controllers.
- Support for ST Microelectronics STM32F7 and STM32MP25, and Renesas
RZ/Five"
* tag 'spi-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (83 commits)
spi: stm32: add st,stm32mp25-spi compatible supporting STM32MP25 soc
dt-bindings: spi: stm32: add st,stm32mp25-spi compatible
spi: stm32: use dma_get_slave_caps prior to configuring dma channel
spi: axi-spi-engine: fix struct member doc warnings
spi: pl022: update description of internal_cs_control()
spi: pl022: delete description of cur_msg
spi: dw: Remove Intel Thunder Bay SOC support
spi: dw: Remove Intel Thunder Bay SOC support
spi: sh-msiof: Enforce fixed DTDL for R-Car H3
spi: ljca: switch to use devm_spi_alloc_host()
spi: cs42l43: switch to use devm_spi_alloc_host()
spi: zynqmp-gqspi: switch to use modern name
spi: zynq-qspi: switch to use modern name
spi: xtensa-xtfpga: switch to use modern name
spi: xlp: switch to use modern name
spi: xilinx: switch to use modern name
spi: xcomm: switch to use modern name
spi: uniphier: switch to use modern name
spi: topcliff-pch: switch to use modern name
spi: wpcm-fiu: switch to use devm_spi_alloc_host()
...
|
|
Sparse reports an endian mismatch.
The amplifier expects the calibration data as big-endian.
Use the __be32 type to express endianness better.
Fixes: c3ca4458cc2f ("ALSA: hda/tas2781: add TAS2563 support for 14ARB7")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202401072137.Oc7pQgRW-lkp@intel.com/
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/3852ff28ea7d5d8f2086d8dd78aeff8d1d984991.1704748435.git.soyer@irl.hu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This enables the mute and mic-mute LEDs on the HP Envy X360 13-ay0xxx
convertibles.
The quirk 'ALC245_FIXUP_HP_X360_MUTE_LEDS' already exists and is now
enabled for this device.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216197
Signed-off-by: Tom Jason Schwanke <tom@catboys.cloud>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/651b26e9-e86b-45dd-aa90-3e43d6b99823@catboys.cloud
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When OMTP headset plugin the headset jack of CX8070 and SN6160 sound cards,
the headset type detection circuit will recognize the headset type as CTIA.
At this point, plugout and plugin the headset will get the correct headset
type as OMTP.
The reason for the failure of headset type recognition is that the sound
card creation will enable the VREF voltage of the headset mic, which
interferes with the headset type automatic detection circuit. Plugout and
plugin the headset will restart the headset detection and get the correct
headset type.
The patch is disable the VREF voltage when the headset is not present, and
will enable the VREF voltage when the headset is present.
Signed-off-by: bo liu <bo.liu@senarytech.com>
Link: https://lore.kernel.org/r/20240108110235.3867-1-bo.liu@senarytech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v6.8
This is a relatively quiet release, there's a lot of driver specific
changes and the usual high level of activity in the SOF core but the
one big core change was Mormioto-san's work to support more N:M
CPU:CODEC mapping cases. Highlights include:
- Enhanced support for N:M CPU:CODEC mappings in the core and in
audio-graph-card2.
- Support for falling back to older SOF IPC versions where firmware for
new versions is not available.
- Support for notification of control changes generated by SOF firmware
with IPC4.
- Device tree support for describing parts of the card which can be
active over suspend (for very low power playback or wake word use
cases).
- ACPI parsing support for the ES83xx driver, reducing the number of
quirks neede for x86 systems.
- Support for more AMD and Intel systems, NXP i.MX8m MICFIL, Qualcomm
SM8250, SM8550, SM8650 and X1E80100.
- Removal of Freescale MPC8610 support, the SoC is no longer supported
by Linux.
|
|
Prepare for 6.8 merge.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
LEDs in 'HP ProBook 440 G6' laptop are controlled by ALC236 codec.
Enable already existing quirk 'ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF'
to fix mute and mic-mute LEDs.
Signed-off-by: Siddhesh Dharme <siddheshdharme18@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240104060736.5149-1-siddheshdharme18@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.7
I recently got a LibreTech Sapphire board for my CI and while
integrating it found and fixed some issues, including crashes for the
enum validation. There's also a couple of patches adding quirks for
another x86 laptop from Hans and an error handling fix for the Freescale
rpmsg driver.
|
|
When a control changes value the return value from _put() should be 1 so
we get events generated to userspace notifying applications of the change.
While the I2S mux gets this right the S/PDIF mux does not, fix the return
value.
Fixes: c8609f3870f7 ("ASoC: meson: add g12a tohdmitx control")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240103-meson-enum-val-v1-4-424af7a8fb91@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When a control changes value the return value from _put() should be 1 so
we get events generated to userspace notifying applications of the change.
We are checking if there has been a change and exiting early if not but we
are not providing the correct return value in the latter case, fix this.
Fixes: af2618a2eee8 ("ASoC: meson: g12a: add internal DAC glue driver")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240103-meson-enum-val-v1-3-424af7a8fb91@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When writing to an enum we need to verify that the value written is valid
for the enumeration, the helper function snd_soc_item_enum_to_val() doesn't
do it since it needs to return an unsigned (and in any case we'd need to
check the return value).
Fixes: c8609f3870f7 ("ASoC: meson: add g12a tohdmitx control")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240103-meson-enum-val-v1-2-424af7a8fb91@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When writing to an enum we need to verify that the value written is valid
for the enumeration, the helper function snd_soc_item_enum_to_val() doesn't
do it since it needs to return an unsigned (and in any case we'd need to
check the return value).
Fixes: af2618a2eee8 ("ASoC: meson: g12a: add internal DAC glue driver")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240103-meson-enum-val-v1-1-424af7a8fb91@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The current code flow is:
1. snd_hdac_device_register()
2. set parameters needed by the hdac driver
3. request_codec_module()
the hdac driver is probed at this point
During boot the codec drivers are not loaded when the hdac device is
registered, it is going to be probed later when loading the codec module,
which point the parameters are set.
On module remove/insert
rmmod snd_sof_pci_intel_tgl
modprobe snd_sof_pci_intel_tgl
The codec module remains loaded and the driver will be probed when the
hdac device is created right away, before the parameters for the driver
has been configured:
1. snd_hdac_device_register()
the hdac driver is probed at this point
2. set parameters needed by the hdac driver
3. request_codec_module()
will be a NOP as the module is already loaded
Move the snd_hdac_device_register() later, to be done right before
requesting the codec module to make sure that the parameters are all set
before the device is created:
1. set parameters needed by the hdac driver
2. snd_hdac_device_register()
3. request_codec_module()
This way at the hdac driver probe all parameters will be set in all cases.
Link: https://github.com/thesofproject/linux/issues/4731
Fixes: a0575b4add21 ("ASoC: hdac_hda: Conditionally register dais for HDMI and Analog")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231207095425.19597-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/ZYvUIxtrqBQZbNlC@shine.dominikbrodowski.net
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218304
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When CONFIG_SPI is disabled, the driver produces unused-variable warning:
sound/pci/hda/cs35l41_hda_property.c: In function 'generic_dsd_config':
sound/pci/hda/cs35l41_hda_property.c:181:28: error: unused variable 'spi' [-Werror=unused-variable]
181 | struct spi_device *spi;
| ^~~
sound/pci/hda/cs35l41_hda_property.c:180:27: error: unused variable 'cs_gpiod' [-Werror=unused-variable]
180 | struct gpio_desc *cs_gpiod;
| ^~~~~~~~
Avoid these by turning the preprocessor contionals into equivalent C code,
which also helps readability.
Fixes: 916d051730ae ("ALSA: hda: cs35l41: Only add SPI CS GPIO if SPI is enabled in kernel")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240103102606.3742476-1-arnd@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The ac97_bus_type structure is no longer declared in this file:
sound/ac97/bus.c: In function 'ac97_codec_add':
sound/ac97/bus.c:112:27: error: 'ac97_bus_type' undeclared (first use in this function); did you mean 'bus_type'?
112 | codec->dev.bus = &ac97_bus_type;
| ^~~~~~~~~~~~~
| bus_type
sound/ac97/bus.c:112:27: note: each undeclared identifier is reported only once for each function it appears in
sound/ac97/bus.c: In function 'snd_ac97_codec_driver_register':
sound/ac97/bus.c:191:28: error: 'ac97_bus_type' undeclared (first use in this function); did you mean 'ac97_bus_reset'?
191 | drv->driver.bus = &ac97_bus_type;
Include the header that contains the declaration and make sure the definition
is const but not static.
Fixes: 66e82d219924 ("ALSA: mark all struct bus_type as const")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240103102544.3715055-1-arnd@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Pull updates for CS35L41 codec for HP models.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This adds overrides for a series of notebooks using a common config
taken from HP's proprietary Windows driver.
This has been tested on a HP 15-ey0xxxx device (subsystem 103C8A31)
together with another Realtek quirk and the calibration files from the
proprietary driver.
Signed-off-by: Lorenz Brun <lorenz@brun.one>
Cc: <stable@vger.kernel.org> # v6.7
Link: https://lore.kernel.org/r/20240102214821.3394810-1-lorenz@brun.one
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The 14ARB7 has two tas2563 amplifier on i2c.
Connect it to the tas2781 driver.
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/abce9ee55689523562feb72383377171a489ddc7.1703891777.git.soyer@irl.hu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The INT8866 belongs to the Lenovo Yoga 7 Gen 7 AMD 14ARB7
laptop. It has two TAS2563 amplifier. Add the PNP ID
and calibration functions to handle them.
ACPI excerpt:
Scope (_SB.I2CD)
{
Device (TAS)
{
Name (_HID, "INT8866") // _HID: Hardware ID
Name (_UID, Zero) // _UID: Unique ID
Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings
{
Name (RBUF, ResourceTemplate ()
{
I2cSerialBusV2 (0x004C, ControllerInitiated, 0x00061A80,
AddressingMode7Bit, "\\_SB.I2CD",
0x00, ResourceConsumer, , Exclusive,
)
I2cSerialBusV2 (0x004D, ControllerInitiated, 0x00061A80,
AddressingMode7Bit, "\\_SB.I2CD",
0x00, ResourceConsumer, , Exclusive,
)
GpioInt (Edge, ActiveLow, SharedAndWake, PullNone, 0x0000,
"\\_SB.GPIO", 0x00, ResourceConsumer, ,
)
{ // Pin list
0x0020
}
})
Return (RBUF) /* \_SB_.I2CD.TAS_._CRS.RBUF */
}
Method (_STA, 0, NotSerialized) // _STA: Status
{
Return (0x0F)
}
}
}
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/3b8d4c602e1a46922f53bc9afc8b705d55aa4872.1703891777.git.soyer@irl.hu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Make the global i2c address configurable to support compatible amplifiers
with different global i2c address.
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/a252f1efeed5049f027f01e699c9e10e1e05bf9e.1703891777.git.soyer@irl.hu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Make calibration functions configurable to support different calibration
data storage modes.
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/5859c77ffef752b8a9784713b412d815d7e2688c.1703891777.git.soyer@irl.hu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
There is a HP ZBook which using ALC236 codec and need the
ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF quirk to make mute LED
and micmute LED work.
[ confirmed that the new entries are for new models that have no
proper name, so the strings are left as "HP" which will be updated
eventually later -- tiwai ]
Signed-off-by: Andy Chi <andy.chi@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240102024916.19093-1-andy.chi@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Pull CS35L41 codec updates for Lenovo laptops.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
serie
Add driver properties on 4 models of this laptop serie since they don't
have _DSD in the ACPI table
Signed-off-by: Dorian Cruveiller <doriancruveiller@gmail.com>
Cc: <stable@vger.kernel.org> # v6.7
Link: https://lore.kernel.org/r/20231230114312.22118-1-doriancruveiller@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
(2023) serie
Link up the realtek audio chip to the cirrus cs35l41 sound amplifier chip
on 4 models of the Lenovo legion slim 7 gen 8 (2023). These models are
16IRH8 (2 differents subsystem id) and 16APH8 (2 differents subsystem ids).
Subsystem ids list:
- 17AA38B4
- 17AA38B5
- 17AA38B6
- 17AA38B7
Signed-off-by: Dorian Cruveiller <doriancruveiller@gmail.com>
Cc: <stable@vger.kernel.org> # v6.7
Link: https://lore.kernel.org/r/20231230114001.19855-1-doriancruveiller@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Make the amp available immediately after a module
load to avoid having to wait for a PCM hook action.
(eg. unloading & loading the module while listening
music)
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/7f2f65d9212aa16edd4db8725489ae59dbe74c66.1703895108.git.soyer@irl.hu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The HP Pavilion 14 ec1xxx series uses the HP mainboard 8A0F with the
ALC287 codec.
The mute led can be enabled using the already existing
ALC287_FIXUP_HP_GPIO_LED quirk.
Tested on an HP Pavilion ec1003AU
Signed-off-by: Aabish Malik <aabishmalik3337@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231229170352.742261-3-aabishmalik3337@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Now that the driver core can properly handle constant struct bus_type,
move all of the sound subsystem struct bus_type structures as const,
placing them into read-only memory which can not be modified at runtime.
Note, this fixes a duplicate definition of ac97_bus_type, which somehow
was declared extern in a .h file, and then static as a prototype in a .c
file, and then properly later on in the same .c file. Amazing that no
compiler warning ever showed up for this.
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Dawei Li <set_pte_at@outlook.com>
Cc: Yu Liao <liaoyu15@huawei.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: linux-sound@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/2023121945-immersion-budget-d0aa@gregkh
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
On ARM64 platforms, SND_ARM shouldn't be selectable, but enabling
SND_SOC_MMP_SSPA will enable SND_ARM and cause build errors if
SND_ARMAACI is enabled (which it is by default). Since the SSPA driver
doesn't depend on AACI nor PXA2XX_LIB, remove this false dependency.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310230518.zs9Qpg3j-lkp@intel.com/
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
Link: https://lore.kernel.org/r/20231226200025.30870-1-duje.mihanovic@skole.hr
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch makes sure that the workqueue is completed before the system suspends.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20231229092922.853-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
AUD_PAD_TOP widget's correct register is AFE_AUD_PAD_TOP , and not zero.
Having a zero as register, it would mean that the `snd_soc_dapm_new_widgets`
would try to read the register at offset zero when trying to get the power
status of this widget, which is incorrect.
Fixes: b65c466220b3 ("ASoC: mediatek: mt8186: support adda in platform driver")
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Link: https://lore.kernel.org/r/20231229114342.195867-1-eugen.hristev@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Pull Scarlett2 USB audio mixer extensions.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When the Direct button on the Solo Gen 4 is held for 3 seconds, the
PCM 1 and 2 inputs are toggled between DSP Outputs 1 and 2, and Mixer
Outputs E and F. This patch adds the corresponding ALSA control.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/8c67c6131c459588ac4edab11e1fbc40a8297328.1703612638.git.g@b4.vu
|
|
Add new Focusrite Scarlett Gen 4 USB IDs, notification arrays, config
sets, and device info data.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/b33526d3b7a56bb2c86aa4eb2137a415bd23f1ce.1703612638.git.g@b4.vu
|
|
The Scarlett 4i4 Gen 4 adds a R/O headphone volume control in addition
to a R/O master volume control (which is already supported).
Mark the new scarlett2_notify_volume() function with __always_unused
until it gets used when the Gen 4 notification callback function arrays
are added.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/bd4a76da157f8cc3fbfa02eba96d02bdb86817c5.1703612638.git.g@b4.vu
|
|
Early firmware for the Scarlett Gen 4 devices has sufficient
differences that it is better to enforce a minimum firmware version
than to try and work around those differences. Add a minimum firmware
version field to the device info struct, and display a message if the
firmware version is too old. Only create the Firmware Version and MSD
(optional) controls in this case.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/5455a7e54bda81556066abd7f761b10e9c5f8a16.1703612638.git.g@b4.vu
|
|
The DSP mux channels are of type SCARLETT2_PORT_TYPE_MIX so the
ALSA controls would refer to them "Mix X" and "Mixer Input X". This
patch fixes them to be called "DSP X" and "DSP Input X".
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/2d91d0a74d5c7f6179e950bed2c80a4498d16649.1703612638.git.g@b4.vu
|
|
The DSP mux channels in the Scarlett 4th Gen appear as
SCARLETT2_PORT_TYPE_MIX ports but do not have corresponding mixer
controls. Add a dsp_count option to the device info struct to exclude
those DSP channels from the num_mix_in/num_mix_out counts.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/b78bdb1a7624d55783f5bf0e1ffbfa47a9e9a800.1703612638.git.g@b4.vu
|
|
The mixes used by Direct Monitor feature on the Scarlett 4th Gen Solo
and 2i2 interfaces are configurable. This patch adds ALSA controls for
the gains which are copied to the mixer when Direct Monitor is
enabled.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/96282a805b45f04560e5923d170745363906b7f3.1703612638.git.g@b4.vu
|
|
When the Direct Monitor feature on the Scarlett 4th Gen Solo and 2i2
interfaces is used, the Mix A and B gains are updated by the
interface. This patch calls snd_ctl_notify() for the ALSA mix controls
when a Direct Monitor notification is received.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/713d032e343e0547212368919bef17d6fa1c9d29.1703612638.git.g@b4.vu
|
|
The Scarlett 4th Gen small interfaces have a software-controllable
mixer like the large 2nd and 3rd Gen interfaces do. Pressing the
"Direct" button on the interface updates the mixer controls, which
this driver hasn't needed to deal with previously.
This commit stores the ALSA mixer controls, and adds a mix_updated
flag so that the controls can be updated when a notification is
received.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/3ba27c60230511b80b0fa75727551ea70f17d829.1703612638.git.g@b4.vu
|
|
Add a control to retrieve the power status from the interface
(bus-powered, external-powered, or insufficient power).
Mark the new scarlett2_notify_power_status() function with
__always_unused until it gets used when the Gen 4 notification
callback function arrays are added.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/d9806bc41adc45b1c19749562fec7765ba24351d.1703612638.git.g@b4.vu
|
|
When phantom power is enabled or disabled, the autogain control cannot
be enabled until the interface has signalled that the change is
complete and the input is unmuted. Update those controls to be
read-only during this time.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/f49f7bf9358e1f20713d95d407d8d6a436859877.1703612638.git.g@b4.vu
|
|
While the autogain function is running, the other input controls
(select, link, gain, safe, level, air, and phantom) can't be modified.
Update those controls to be read-only during this time.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/ad13bacae77860de8c2d7c89f6ec2a1ee104e65f.1703612638.git.g@b4.vu
|
|
Create local variable for storing private data pointer in
snd_scarlett2_controls_create(). It's currently only used for checking
msd_switch, but it will be used again.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/ab50939dca0fdc5fa3493fc8eee3a2fdefffa62d.1703612638.git.g@b4.vu
|
|
Some devices in the Scarlett Gen 4 series have support for
software-controllable input gain. Along with this comes a channel
select option, an auto-gain feature, "safe" mode, and linking two
channels into a stereo pair.
Mark the new scarlett2_notify_input_*() functions with __always_unused
until they get used when the Gen 4 notification callback function
arrays are added.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/fc39e80bb39863dd1579d342097203942b4f3034.1703612638.git.g@b4.vu
|
